summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2009-11-25ethtool: add support for block writing of EEPROMsMandeep Singh Baines2-18/+52
EEPROM write only supports byte writing. Add support for writing an arbitrary number of bytes at an arbitrary offset. Signed-off-by: Mandeep Singh Baines <msb@google.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-11-25ethtool-copy.h: update for ETHTOOL_RESET and IPV?_FLOW definitionsJeff Garzik1-0/+33
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-11-25Consolidate cmd line error checking.Jay Fenlason1-24/+32
This also fixes the bug that the usage message displays %%[dx] instead of %[dx]. This does not fix the fact that the usage message says %[dx] in some places and 'N' in others. Maybe it should use %d where only base-10 is accepted, %x where only base-16 is, and N where either is acceptable. Signed-off-by: Jay Fenlason <fenlason@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-11-25ethtool: Add option to flash firmware image from specified file, to a device.Ajit Khaparde3-4/+91
This patch adds a new "-f" option to the ethtool utility to flash a firmware image specified by a file, to a network device. The filename is passed to the network driver which will flash the image on the chip using the request_firmware path. The region "on the chip" to be flashed can be specified by an option. It is up to the device driver to enumerate the region number passed by ethtool, to the region to be flashed. The default behavior is to flash all the regions on the chip. Usage: ethtool -f <interface name> <filename of firmware image> ethtool -f <interface name> <filename of firmware image> [ REGION-NUMBER-TO-FLASH ] Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-11-25ethtool: Report pause auto-negotiation flagsBen Hutchings1-0/+13
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-11-25ethtool: Report link partner advertisingBen Hutchings1-9/+11
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-11-25ethtool: Decode PORT_OTHERBen Hutchings1-0/+3
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-11-25ethtool: Update ethtool-copy.hBen Hutchings1-7/+100
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-11-25ethtool: Remove support for RX hashing by portBen Hutchings2-10/+1
The kernel-side support for this was removed by: commit 59089d8d162ddcb5c434672e915331964d38a754 Author: Santwona Behera <santwona.behera@sun.com> Date: Fri Feb 20 00:58:13 2009 -0800 ethtool: Add RX pkt classification interface Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-03-23Command line help does not require DEVNAME on command line.Jeff Garzik1-1/+2
Reflect this in usage text. Patch via Robert Scheck <robert@fedoraproject.org>, possibly other sources as well? Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-03-06Change version from "6" to "6git", indicating it is not truly v6.Jeff Garzik1-1/+1
Should have done this immediately after v6 release. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-03-06man page: Add GRO and LRO to the full description of the -K optionBen Hutchings1-0/+6
Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-03-06ethtool: Support arbitrary speedsBen Hutchings2-34/+12
The speed and speed_hi fields of struct ethtool_cmd together represent a value in units of Mbit/s. The valid speed settings are hardware- dependent and should be checked by the driver. Remove our validation and allow arbitrary positive values. Continue to report 0 and -1 as "Unknown!" since some drivers will report these invalid values when the link is down. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-03-06Merge several minor changes from Debian.Jeff Garzik1-41/+49
Namely, wrap ioctl send so that Debian can more easily support kernels older than 2.4.x. We don't support that, but they wish to. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-03-06igb, ixgbe: Trim trailing whitespace.Jeff Garzik2-65/+65
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-03-06ethtool: Manual page correctionsBen Hutchings1-3/+3
Fix the following nits, too small to deserve separate patches: There is a separator missing between -K and --offload. The first mention of -p says the long option is --blink, but it's really --identify. The [N] following -p has the brackets in italics, not the N. Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2009-03-06ethtool: Show short message for syntax errorBen Hutchings1-7/+16
In case of a syntax error it's likely to be more helpful to just say that rather than showing the entire usage information, which is now very long. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-03-06Get/set GRO settings.Jeff Garzik3-8/+39
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-03-06Explicitly ship GPLv2 license.Jeff Garzik2-1/+340
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-01-15Directly reference GPL v2 via new LICENSE file.Jeff Garzik2-1/+4
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-13ethtool: Add register dump support for all r8169 driver cardsAndrew Paprocki1-46/+64
This adds all MAC versions currently found in the r8169 to the RealTek table and modifies the dump logic to handle card versions >= RTL8169 instead of specifically looking at the few previously supported cards. Signed-off-by: Andrew Paprocki <andrew@ishiboo.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-13ethtool: command line support for lroBen Hutchings1-6/+47
Add lro support to command in similar manner to TSO, GSO, etc. Based on patch by Stephen Hemminger <http://article.gmane.org/gmane.linux.network/88124>. My changes: - Changed error return codes for setting LRO to be unique. - Report failure to get device flags, consistent with other offload settings. - Fixed code spacing. Tested with the sfc driver. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-13Add support for rx flow hash configuration in a network deviceSantwona Behera2-0/+334
Added new interfaces to ethtool to configure receive network flow distribution across multiple rx rings using hashing. Signed-off-by: Santwona Behera <santwona.behera@sun.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-13ethtool: Use ethtool_cmd->speed_hiBrandon Philips2-122/+66
struct ethtool_cmd now has a speed_hi field to support more than 65535 Mb devices, use it. Also, pull in the ethtool-copy.h file without the __KERNEL__ sections. Signed-off-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-01-12ethtool: correct man page for advertise mask value of 10gigAuke Kok1-1/+1
10 gigabit is defined as 0x1000 in the advertise mask. The man page mistakenly lists 0x800. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-12ethtool: update license field in specfile to be correctly definedAuke Kok1-1/+1
RPM uses "License" as field and not "Copyright". Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-01ethtool: fix typo on setting speed 10000Jesse Brandeburg1-1/+1
fix the typo in speed 10000 setting. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-23ethtool: Fix coalesce settings copy+paste typoAuke Kok1-2/+2
Coalesce setting errors use the same error messages as the descriptor ring errors. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-23ethtool: add support for supporting 10000baseTJesse Brandeburg1-0/+7
there is missing support in ethtool for reporting 10000baseT as SUPPORTED_10000baseT_Full. The code seems to be half implemented because the "advertising" field has the implementation. this patch just adds it for supported reporting. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-05ethtool: Add e1000e reg dump support (using e1000 decode function)Auke Kok1-0/+1
The e1000 register dump code can print out e1000e register dump information as well, so enable it for e1000e devices. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-20ethtool: marvell register updateStephen Hemminger1-20/+36
Update the decode of sky2 registers. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-13ethtool: add register dump support for intel 82598 chipsets (ixgbe driver)Nicholas Nunley4-1/+1021
Signed-off-by: Nicholas Nunley <nicholas.d.nunley@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-13ethtool: add register dump support for intel 82575 chipsets (igb driver)Nicholas Nunley4-1/+868
Signed-off-by: Nicholas Nunley <nicholas.d.nunley@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-26Release version 6.Jeff Garzik3-2/+21
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-26Update embedded copy of ethtool.h from kernel 2.6.23-rc1.Jeff Garzik2-98/+234
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-26Trim trailing whitespace.Jeff Garzik3-7/+7
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-26ethtool: add register dump support for SMSC LAN911x/LAN921xSteve Glendinning4-1/+98
This patch adds support for SMSC's LAN911x and LAN921x families of embedded ethernet controllers to ethtool's dump registers (-d) command. This patch is for use with the smsc911x driver. Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10ethtool: new ID to decode the registers of the 8101E (realtek)Francois Romieu1-0/+1
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Rolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-24ethtool: new ID to decode the registers of the 8168 (realtek)Francois Romieu1-0/+1
Tested with an Asrock 945G-DVI (LOM). Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-11ethtool: Add 2.5G supportMichael Chan3-3/+35
Add 2.5G Serdes support to ethtool user program and ethtool.8 man page. The missing pause bits are also added to keep ethtool-copy.h in sync with the kernel's version. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-05ethtool: add 88e807X chip to decodeStephen Hemminger1-0/+3
Add decode for Yukon Extreme chip Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-05ethtool: marvell chip version decode fixStephen Hemminger1-1/+1
The chip revision wasn't being decoded properly. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-05ethtool: additional 10Gig nicenessRick Jones2-54/+73
teach ethtool to print "10000Mb/s" for a 10G NIC and prepare for 10G NICs where it is possible to run something other than 10G update the ethtool.8 manpage with info re same and some grammar fixes Signed-off-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-09marvell chip decode formattingStephen Hemminger1-13/+24
Fix some typo's and formatting on Marvell ethtool output. If sync transmit queue is not used, don't print settings. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-09e1000: update device ID table for register dumpsAuke Kok1-51/+103
e1000: update device ID table for register dumps with new devices From: Auke Kok <auke-jan.h.kok@intel.com> The register dump routine of e1000 was missing several newer chipsets. I reimported the mac detection code from the linux e1000 driver. This fixes newer NIC's reporting that their bus type is PCI instead of PCI-e. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-09ethtool: fix long statistics nameStephen Hemminger1-6/+4
Fix handling of statistics where the label is exactly 32 (ETH_GSTRING_LEN) characters long (observed with chelsio 10G driver). Before it would print garbage because of going by end of string. Don't need to copy string, just use formats properly. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-09ethtool: allow force hex in register dumpStephen Hemminger2-4/+8
Sometimes the device decode logic just gets in the way so add a "force hex" option to register dump. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-09ethtool: flie option to register dumpStephen Hemminger2-7/+49
Add ability to take old raw dumps from a file and decode them. It is kind of limited because you still need to have same device as the raw file, but useful for maintainers to decode raw dumps. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-07[PATCH] ethtool: marvell register dumpStephen Hemminger1-29/+77
This is a consolidation of earlier marvell register decode patches to ethtool. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-31[PATCH] Fabric7 VIOC: EthtoolSriram Chidambaram1-2/+0
Removed debug print statement Signed-off-by: Fabric7 Driver-Support <driver-support@fabric7.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
generated by cgit v1.2.1 (git 2.18.0) at 2024-05-18 12:13:03 +0000