From a4016c6c9e43a8201b33d007816b45b5abbf92b3 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Tue, 16 Nov 2010 19:08:59 +0000 Subject: ethtool-copy.h: sync with net-next-2.6 This covers kernel changes up to: commit d5dbda23804156ae6f35025ade5307a49d1db6d7 Author: Jesse Gross Date: Wed Oct 20 13:56:07 2010 +0000 ethtool: Add support for vlan accleration. Signed-off-by: Ben Hutchings --- ethtool-copy.h | 230 +++++++++++++++++++++++++++++++++++++++------------------ 1 file changed, 159 insertions(+), 71 deletions(-) diff --git a/ethtool-copy.h b/ethtool-copy.h index 894f1da..75c3ae7 100644 --- a/ethtool-copy.h +++ b/ethtool-copy.h @@ -14,6 +14,7 @@ #define _LINUX_ETHTOOL_H #include +#include /* This should work for both 32 and 64 bit userland. */ struct ethtool_cmd { @@ -308,15 +309,28 @@ struct ethtool_perm_addr { * flag differs from the read-only value. */ enum ethtool_flags { + ETH_FLAG_TXVLAN = (1 << 7), /* TX VLAN offload enabled */ + ETH_FLAG_RXVLAN = (1 << 8), /* RX VLAN offload enabled */ ETH_FLAG_LRO = (1 << 15), /* LRO is enabled */ ETH_FLAG_NTUPLE = (1 << 27), /* N-tuple filters enabled */ ETH_FLAG_RXHASH = (1 << 28), }; /* The following structures are for supporting RX network flow - * classification configuration. Note, all multibyte fields, e.g., - * ip4src, ip4dst, psrc, pdst, spi, etc. are expected to be in network - * byte order. + * classification and RX n-tuple configuration. Note, all multibyte + * fields, e.g., ip4src, ip4dst, psrc, pdst, spi, etc. are expected to + * be in network byte order. + */ + +/** + * struct ethtool_tcpip4_spec - flow specification for TCP/IPv4 etc. + * @ip4src: Source host + * @ip4dst: Destination host + * @psrc: Source port + * @pdst: Destination port + * @tos: Type-of-service + * + * This can be used to specify a TCP/IPv4, UDP/IPv4 or SCTP/IPv4 flow. */ struct ethtool_tcpip4_spec { __be32 ip4src; @@ -326,6 +340,15 @@ struct ethtool_tcpip4_spec { __u8 tos; }; +/** + * struct ethtool_ah_espip4_spec - flow specification for IPsec/IPv4 + * @ip4src: Source host + * @ip4dst: Destination host + * @spi: Security parameters index + * @tos: Type-of-service + * + * This can be used to specify an IPsec transport or tunnel over IPv4. + */ struct ethtool_ah_espip4_spec { __be32 ip4src; __be32 ip4dst; @@ -333,21 +356,17 @@ struct ethtool_ah_espip4_spec { __u8 tos; }; -struct ethtool_rawip4_spec { - __be32 ip4src; - __be32 ip4dst; - __u8 hdata[64]; -}; - -struct ethtool_ether_spec { - __be16 ether_type; - __u8 frame_size; - __u8 eframe[16]; -}; - #define ETH_RX_NFC_IP4 1 -#define ETH_RX_NFC_IP6 2 +/** + * struct ethtool_usrip4_spec - general flow specification for IPv4 + * @ip4src: Source host + * @ip4dst: Destination host + * @l4_4_bytes: First 4 bytes of transport (layer 4) header + * @tos: Type-of-service + * @ip_ver: Value must be %ETH_RX_NFC_IP4; mask must be 0 + * @proto: Transport protocol number; mask must be 0 + */ struct ethtool_usrip4_spec { __be32 ip4src; __be32 ip4dst; @@ -357,6 +376,15 @@ struct ethtool_usrip4_spec { __u8 proto; }; +/** + * struct ethtool_rx_flow_spec - specification for RX flow filter + * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW + * @h_u: Flow fields to match (dependent on @flow_type) + * @m_u: Masks for flow field bits to be ignored + * @ring_cookie: RX ring/queue index to deliver to, or %RX_CLS_FLOW_DISC + * if packets should be discarded + * @location: Index of filter in hardware table + */ struct ethtool_rx_flow_spec { __u32 flow_type; union { @@ -365,36 +393,91 @@ struct ethtool_rx_flow_spec { struct ethtool_tcpip4_spec sctp_ip4_spec; struct ethtool_ah_espip4_spec ah_ip4_spec; struct ethtool_ah_espip4_spec esp_ip4_spec; - struct ethtool_rawip4_spec raw_ip4_spec; - struct ethtool_ether_spec ether_spec; struct ethtool_usrip4_spec usr_ip4_spec; - __u8 hdata[64]; - } h_u, m_u; /* entry, mask */ + struct ethhdr ether_spec; + __u8 hdata[72]; + } h_u, m_u; __u64 ring_cookie; __u32 location; }; +/** + * struct ethtool_rxnfc - command to get or set RX flow classification rules + * @cmd: Specific command number - %ETHTOOL_GRXFH, %ETHTOOL_SRXFH, + * %ETHTOOL_GRXRINGS, %ETHTOOL_GRXCLSRLCNT, %ETHTOOL_GRXCLSRULE, + * %ETHTOOL_GRXCLSRLALL, %ETHTOOL_SRXCLSRLDEL or %ETHTOOL_SRXCLSRLINS + * @flow_type: Type of flow to be affected, e.g. %TCP_V4_FLOW + * @data: Command-dependent value + * @fs: Flow filter specification + * @rule_cnt: Number of rules to be affected + * @rule_locs: Array of valid rule indices + * + * For %ETHTOOL_GRXFH and %ETHTOOL_SRXFH, @data is a bitmask indicating + * the fields included in the flow hash, e.g. %RXH_IP_SRC. The following + * structure fields must not be used. + * + * For %ETHTOOL_GRXRINGS, @data is set to the number of RX rings/queues + * on return. + * + * For %ETHTOOL_GRXCLSRLCNT, @rule_cnt is set to the number of defined + * rules on return. + * + * For %ETHTOOL_GRXCLSRULE, @fs.@location specifies the index of an + * existing filter rule on entry and @fs contains the rule on return. + * + * For %ETHTOOL_GRXCLSRLALL, @rule_cnt specifies the array size of the + * user buffer for @rule_locs on entry. On return, @data is the size + * of the filter table and @rule_locs contains the indices of the + * defined rules. + * + * For %ETHTOOL_SRXCLSRLINS, @fs specifies the filter rule to add or + * update. @fs.@location specifies the index to use and must not be + * ignored. + * + * For %ETHTOOL_SRXCLSRLDEL, @fs.@location specifies the index of an + * existing filter rule on entry. + * + * Implementation of indexed classification rules generally requires a + * TCAM. + */ struct ethtool_rxnfc { __u32 cmd; __u32 flow_type; - /* The rx flow hash value or the rule DB size */ __u64 data; - /* The following fields are not valid and must not be used for - * the ETHTOOL_{G,X}RXFH commands. */ struct ethtool_rx_flow_spec fs; __u32 rule_cnt; __u32 rule_locs[0]; }; +/** + * struct ethtool_rxfh_indir - command to get or set RX flow hash indirection + * @cmd: Specific command number - %ETHTOOL_GRXFHINDIR or %ETHTOOL_SRXFHINDIR + * @size: On entry, the array size of the user buffer. On return from + * %ETHTOOL_GRXFHINDIR, the array size of the hardware indirection table. + * @ring_index: RX ring/queue index for each hash value + */ struct ethtool_rxfh_indir { __u32 cmd; - /* On entry, this is the array size of the user buffer. On - * return from ETHTOOL_GRXFHINDIR, this is the array size of - * the hardware indirection table. */ __u32 size; - __u32 ring_index[0]; /* ring/queue index for each hash value */ + __u32 ring_index[0]; }; +/** + * struct ethtool_rx_ntuple_flow_spec - specification for RX flow filter + * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW + * @h_u: Flow field values to match (dependent on @flow_type) + * @m_u: Masks for flow field value bits to be ignored + * @vlan_tag: VLAN tag to match + * @vlan_tag_mask: Mask for VLAN tag bits to be ignored + * @data: Driver-dependent data to match + * @data_mask: Mask for driver-dependent data bits to be ignored + * @action: RX ring/queue index to deliver to (non-negative) or other action + * (negative, e.g. %ETHTOOL_RXNTUPLE_ACTION_DROP) + * + * For flow types %TCP_V4_FLOW, %UDP_V4_FLOW and %SCTP_V4_FLOW, where + * a field value and mask are both zero this is treated as if all mask + * bits are set i.e. the field is ignored. + */ struct ethtool_rx_ntuple_flow_spec { __u32 flow_type; union { @@ -403,22 +486,26 @@ struct ethtool_rx_ntuple_flow_spec { struct ethtool_tcpip4_spec sctp_ip4_spec; struct ethtool_ah_espip4_spec ah_ip4_spec; struct ethtool_ah_espip4_spec esp_ip4_spec; - struct ethtool_rawip4_spec raw_ip4_spec; - struct ethtool_ether_spec ether_spec; struct ethtool_usrip4_spec usr_ip4_spec; - __u8 hdata[64]; - } h_u, m_u; /* entry, mask */ + struct ethhdr ether_spec; + __u8 hdata[72]; + } h_u, m_u; __u16 vlan_tag; __u16 vlan_tag_mask; - __u64 data; /* user-defined flow spec data */ - __u64 data_mask; /* user-defined flow spec mask */ + __u64 data; + __u64 data_mask; - /* signed to distinguish between queue and actions (DROP) */ __s32 action; -#define ETHTOOL_RXNTUPLE_ACTION_DROP -1 +#define ETHTOOL_RXNTUPLE_ACTION_DROP (-1) /* drop packet */ +#define ETHTOOL_RXNTUPLE_ACTION_CLEAR (-2) /* clear filter */ }; +/** + * struct ethtool_rx_ntuple - command to set or clear RX flow filter + * @cmd: Command number - %ETHTOOL_SRXNTUPLE + * @fs: Flow filter specification + */ struct ethtool_rx_ntuple { __u32 cmd; struct ethtool_rx_ntuple_flow_spec fs; @@ -444,29 +531,29 @@ struct ethtool_flash { #define ETHTOOL_GREGS 0x00000004 /* Get NIC registers. */ #define ETHTOOL_GWOL 0x00000005 /* Get wake-on-lan options. */ #define ETHTOOL_SWOL 0x00000006 /* Set wake-on-lan options. */ -#define ETHTOOL_GMSGLVL 0x00000007 /* Get driver message level */ -#define ETHTOOL_SMSGLVL 0x00000008 /* Set driver msg level. */ +#define ETHTOOL_GMSGLVL 0x00000007 /* Get driver message level */ +#define ETHTOOL_SMSGLVL 0x00000008 /* Set driver msg level. */ #define ETHTOOL_NWAY_RST 0x00000009 /* Restart autonegotiation. */ #define ETHTOOL_GLINK 0x0000000a /* Get link status (ethtool_value) */ -#define ETHTOOL_GEEPROM 0x0000000b /* Get EEPROM data */ -#define ETHTOOL_SEEPROM 0x0000000c /* Set EEPROM data. */ +#define ETHTOOL_GEEPROM 0x0000000b /* Get EEPROM data */ +#define ETHTOOL_SEEPROM 0x0000000c /* Set EEPROM data. */ #define ETHTOOL_GCOALESCE 0x0000000e /* Get coalesce config */ #define ETHTOOL_SCOALESCE 0x0000000f /* Set coalesce config. */ #define ETHTOOL_GRINGPARAM 0x00000010 /* Get ring parameters */ #define ETHTOOL_SRINGPARAM 0x00000011 /* Set ring parameters. */ #define ETHTOOL_GPAUSEPARAM 0x00000012 /* Get pause parameters */ #define ETHTOOL_SPAUSEPARAM 0x00000013 /* Set pause parameters. */ -#define ETHTOOL_GRXCSUM 0x00000014 /* Get RX hw csum enable (ethtool_value) */ -#define ETHTOOL_SRXCSUM 0x00000015 /* Set RX hw csum enable (ethtool_value) */ -#define ETHTOOL_GTXCSUM 0x00000016 /* Get TX hw csum enable (ethtool_value) */ -#define ETHTOOL_STXCSUM 0x00000017 /* Set TX hw csum enable (ethtool_value) */ +#define ETHTOOL_GRXCSUM 0x00000014 /* Get RX hw csum enable (ethtool_value) */ +#define ETHTOOL_SRXCSUM 0x00000015 /* Set RX hw csum enable (ethtool_value) */ +#define ETHTOOL_GTXCSUM 0x00000016 /* Get TX hw csum enable (ethtool_value) */ +#define ETHTOOL_STXCSUM 0x00000017 /* Set TX hw csum enable (ethtool_value) */ #define ETHTOOL_GSG 0x00000018 /* Get scatter-gather enable * (ethtool_value) */ #define ETHTOOL_SSG 0x00000019 /* Set scatter-gather enable * (ethtool_value). */ #define ETHTOOL_TEST 0x0000001a /* execute NIC self-test. */ #define ETHTOOL_GSTRINGS 0x0000001b /* get specified string set */ -#define ETHTOOL_PHYS_ID 0x0000001c /* identify the NIC */ +#define ETHTOOL_PHYS_ID 0x0000001c /* identify the NIC */ #define ETHTOOL_GSTATS 0x0000001d /* get NIC-specific statistics */ #define ETHTOOL_GTSO 0x0000001e /* Get TSO enable (ethtool_value) */ #define ETHTOOL_STSO 0x0000001f /* Set TSO enable (ethtool_value) */ @@ -477,8 +564,8 @@ struct ethtool_flash { #define ETHTOOL_SGSO 0x00000024 /* Set GSO enable (ethtool_value) */ #define ETHTOOL_GFLAGS 0x00000025 /* Get flags bitmap(ethtool_value) */ #define ETHTOOL_SFLAGS 0x00000026 /* Set flags bitmap(ethtool_value) */ -#define ETHTOOL_GPFLAGS 0x00000027 /* Get driver-private flags bitmap */ -#define ETHTOOL_SPFLAGS 0x00000028 /* Set driver-private flags bitmap */ +#define ETHTOOL_GPFLAGS 0x00000027 /* Get driver-private flags bitmap */ +#define ETHTOOL_SPFLAGS 0x00000028 /* Set driver-private flags bitmap */ #define ETHTOOL_GRXFH 0x00000029 /* Get RX flow hash configuration */ #define ETHTOOL_SRXFH 0x0000002a /* Set RX flow hash configuration */ @@ -505,18 +592,18 @@ struct ethtool_flash { /* Indicates what features are supported by the interface. */ #define SUPPORTED_10baseT_Half (1 << 0) #define SUPPORTED_10baseT_Full (1 << 1) -#define SUPPORTED_100baseT_Half (1 << 2) -#define SUPPORTED_100baseT_Full (1 << 3) +#define SUPPORTED_100baseT_Half (1 << 2) +#define SUPPORTED_100baseT_Full (1 << 3) #define SUPPORTED_1000baseT_Half (1 << 4) #define SUPPORTED_1000baseT_Full (1 << 5) #define SUPPORTED_Autoneg (1 << 6) #define SUPPORTED_TP (1 << 7) #define SUPPORTED_AUI (1 << 8) #define SUPPORTED_MII (1 << 9) -#define SUPPORTED_FIBRE (1 << 10) +#define SUPPORTED_FIBRE (1 << 10) #define SUPPORTED_BNC (1 << 11) #define SUPPORTED_10000baseT_Full (1 << 12) -#define SUPPORTED_Pause (1 << 13) +#define SUPPORTED_Pause (1 << 13) #define SUPPORTED_Asym_Pause (1 << 14) #define SUPPORTED_2500baseX_Full (1 << 15) #define SUPPORTED_Backplane (1 << 16) @@ -526,8 +613,8 @@ struct ethtool_flash { #define SUPPORTED_10000baseR_FEC (1 << 20) /* Indicates what features are advertised by the interface. */ -#define ADVERTISED_10baseT_Half (1 << 0) -#define ADVERTISED_10baseT_Full (1 << 1) +#define ADVERTISED_10baseT_Half (1 << 0) +#define ADVERTISED_10baseT_Full (1 << 1) #define ADVERTISED_100baseT_Half (1 << 2) #define ADVERTISED_100baseT_Full (1 << 3) #define ADVERTISED_1000baseT_Half (1 << 4) @@ -566,12 +653,12 @@ struct ethtool_flash { #define DUPLEX_FULL 0x01 /* Which connector port. */ -#define PORT_TP 0x00 +#define PORT_TP 0x00 #define PORT_AUI 0x01 #define PORT_MII 0x02 #define PORT_FIBRE 0x03 #define PORT_BNC 0x04 -#define PORT_DA 0x05 +#define PORT_DA 0x05 #define PORT_NONE 0xef #define PORT_OTHER 0xff @@ -585,7 +672,7 @@ struct ethtool_flash { /* Enable or disable autonegotiation. If this is set to enable, * the forced link modes above are completely ignored. */ -#define AUTONEG_DISABLE 0x00 +#define AUTONEG_DISABLE 0x00 #define AUTONEG_ENABLE 0x01 /* Mode MDI or MDI-X */ @@ -602,22 +689,23 @@ struct ethtool_flash { #define WAKE_MAGIC (1 << 5) #define WAKE_MAGICSECURE (1 << 6) /* only meaningful if WAKE_MAGIC */ -/* L3-L4 network traffic flow types */ -#define TCP_V4_FLOW 0x01 -#define UDP_V4_FLOW 0x02 -#define SCTP_V4_FLOW 0x03 -#define AH_ESP_V4_FLOW 0x04 -#define TCP_V6_FLOW 0x05 -#define UDP_V6_FLOW 0x06 -#define SCTP_V6_FLOW 0x07 -#define AH_ESP_V6_FLOW 0x08 -#define AH_V4_FLOW 0x09 -#define ESP_V4_FLOW 0x0a -#define AH_V6_FLOW 0x0b -#define ESP_V6_FLOW 0x0c -#define IP_USER_FLOW 0x0d -#define IPV4_FLOW 0x10 -#define IPV6_FLOW 0x11 +/* L2-L4 network traffic flow types */ +#define TCP_V4_FLOW 0x01 /* hash or spec (tcp_ip4_spec) */ +#define UDP_V4_FLOW 0x02 /* hash or spec (udp_ip4_spec) */ +#define SCTP_V4_FLOW 0x03 /* hash or spec (sctp_ip4_spec) */ +#define AH_ESP_V4_FLOW 0x04 /* hash only */ +#define TCP_V6_FLOW 0x05 /* hash only */ +#define UDP_V6_FLOW 0x06 /* hash only */ +#define SCTP_V6_FLOW 0x07 /* hash only */ +#define AH_ESP_V6_FLOW 0x08 /* hash only */ +#define AH_V4_FLOW 0x09 /* hash or spec (ah_ip4_spec) */ +#define ESP_V4_FLOW 0x0a /* hash or spec (esp_ip4_spec) */ +#define AH_V6_FLOW 0x0b /* hash only */ +#define ESP_V6_FLOW 0x0c /* hash only */ +#define IP_USER_FLOW 0x0d /* spec only (usr_ip4_spec) */ +#define IPV4_FLOW 0x10 /* hash only */ +#define IPV6_FLOW 0x11 /* hash only */ +#define ETHER_FLOW 0x12 /* spec only (ether_spec) */ /* L3-L4 network traffic flow hash options */ #define RXH_L2DA (1 << 1) -- cgit v1.2.1