From e3ac850412df91b64aa5f7ccb5e043948a8caef4 Mon Sep 17 00:00:00 2001 From: Brandon Philips Date: Fri, 12 Sep 2008 02:31:40 -0700 Subject: ethtool: Use ethtool_cmd->speed_hi struct ethtool_cmd now has a speed_hi field to support more than 65535 Mb devices, use it. Also, pull in the ethtool-copy.h file without the __KERNEL__ sections. Signed-off-by: Brandon Philips Signed-off-by: Jeff Garzik --- ethtool-copy.h | 182 ++++++++++++++++++++------------------------------------- ethtool.c | 6 +- 2 files changed, 66 insertions(+), 122 deletions(-) diff --git a/ethtool-copy.h b/ethtool-copy.h index 3a63224..eadba25 100644 --- a/ethtool-copy.h +++ b/ethtool-copy.h @@ -12,7 +12,6 @@ #ifndef _LINUX_ETHTOOL_H #define _LINUX_ETHTOOL_H - /* This should work for both 32 and 64 bit userland. */ struct ethtool_cmd { __u32 cmd; @@ -26,9 +25,24 @@ struct ethtool_cmd { __u8 autoneg; /* Enable or disable autonegotiation */ __u32 maxtxpkt; /* Tx pkts before generating tx int */ __u32 maxrxpkt; /* Rx pkts before generating rx int */ - __u32 reserved[4]; + __u16 speed_hi; + __u16 reserved2; + __u32 reserved[3]; }; +static inline void ethtool_cmd_speed_set(struct ethtool_cmd *ep, + __u32 speed) +{ + + ep->speed = (__u16)speed; + ep->speed_hi = (__u16)(speed >> 16); +} + +static inline __u32 ethtool_cmd_speed(struct ethtool_cmd *ep) +{ + return (ep->speed_hi << 16) | ep->speed; +} + #define ETHTOOL_BUSINFO_LEN 32 /* these strings are set to whatever the driver author decides... */ struct ethtool_drvinfo { @@ -39,7 +53,8 @@ struct ethtool_drvinfo { char bus_info[ETHTOOL_BUSINFO_LEN]; /* Bus info for this IF. */ /* For PCI devices, use pci_name(pci_dev). */ char reserved1[32]; - char reserved2[16]; + char reserved2[12]; + __u32 n_priv_flags; /* number of flags valid in ETHTOOL_GPFLAGS */ __u32 n_stats; /* number of u64's from ETHTOOL_GSTATS */ __u32 testinfo_len; __u32 eedump_len; /* Size of data from ETHTOOL_GEEPROM (bytes) */ @@ -219,6 +234,7 @@ struct ethtool_pauseparam { enum ethtool_stringset { ETH_SS_TEST = 0, ETH_SS_STATS, + ETH_SS_PRIV_FLAGS, }; /* for passing string sets for data tagging */ @@ -256,125 +272,24 @@ struct ethtool_perm_addr { __u8 data[0]; }; -#ifdef __KERNEL__ - -struct net_device; - -/* Some generic methods drivers may use in their ethtool_ops */ -u32 ethtool_op_get_link(struct net_device *dev); -u32 ethtool_op_get_tx_csum(struct net_device *dev); -int ethtool_op_set_tx_csum(struct net_device *dev, u32 data); -int ethtool_op_set_tx_hw_csum(struct net_device *dev, u32 data); -int ethtool_op_set_tx_ipv6_csum(struct net_device *dev, u32 data); -u32 ethtool_op_get_sg(struct net_device *dev); -int ethtool_op_set_sg(struct net_device *dev, u32 data); -u32 ethtool_op_get_tso(struct net_device *dev); -int ethtool_op_set_tso(struct net_device *dev, u32 data); -int ethtool_op_get_perm_addr(struct net_device *dev, - struct ethtool_perm_addr *addr, u8 *data); -u32 ethtool_op_get_ufo(struct net_device *dev); -int ethtool_op_set_ufo(struct net_device *dev, u32 data); - -/** - * ðtool_ops - Alter and report network device settings - * get_settings: Get device-specific settings - * set_settings: Set device-specific settings - * get_drvinfo: Report driver information - * get_regs: Get device registers - * get_wol: Report whether Wake-on-Lan is enabled - * set_wol: Turn Wake-on-Lan on or off - * get_msglevel: Report driver message level - * set_msglevel: Set driver message level - * nway_reset: Restart autonegotiation - * get_link: Get link status - * get_eeprom: Read data from the device EEPROM - * set_eeprom: Write data to the device EEPROM - * get_coalesce: Get interrupt coalescing parameters - * set_coalesce: Set interrupt coalescing parameters - * get_ringparam: Report ring sizes - * set_ringparam: Set ring sizes - * get_pauseparam: Report pause parameters - * set_pauseparam: Set pause paramters - * get_rx_csum: Report whether receive checksums are turned on or off - * set_rx_csum: Turn receive checksum on or off - * get_tx_csum: Report whether transmit checksums are turned on or off - * set_tx_csum: Turn transmit checksums on or off - * get_sg: Report whether scatter-gather is enabled - * set_sg: Turn scatter-gather on or off - * get_tso: Report whether TCP segmentation offload is enabled - * set_tso: Turn TCP segmentation offload on or off - * get_ufo: Report whether UDP fragmentation offload is enabled - * set_ufo: Turn UDP fragmentation offload on or off - * self_test: Run specified self-tests - * get_strings: Return a set of strings that describe the requested objects - * phys_id: Identify the device - * get_stats: Return statistics about the device - * get_perm_addr: Gets the permanent hardware address - * - * Description: - * - * get_settings: - * @get_settings is passed an ðtool_cmd to fill in. It returns - * an negative errno or zero. - * - * set_settings: - * @set_settings is passed an ðtool_cmd and should attempt to set - * all the settings this device supports. It may return an error value - * if something goes wrong (otherwise 0). +/* boolean flags controlling per-interface behavior characteristics. + * When reading, the flag indicates whether or not a certain behavior + * is enabled/present. When writing, the flag indicates whether + * or not the driver should turn on (set) or off (clear) a behavior. * - * get_eeprom: - * Should fill in the magic field. Don't need to check len for zero - * or wraparound. Fill in the data argument with the eeprom values - * from offset to offset + len. Update len to the amount read. - * Returns an error or zero. - * - * set_eeprom: - * Should validate the magic field. Don't need to check len for zero - * or wraparound. Update len to the amount written. Returns an error - * or zero. + * Some behaviors may read-only (unconditionally absent or present). + * If such is the case, return EINVAL in the set-flags operation if the + * flag differs from the read-only value. */ -struct ethtool_ops { - int (*get_settings)(struct net_device *, struct ethtool_cmd *); - int (*set_settings)(struct net_device *, struct ethtool_cmd *); - void (*get_drvinfo)(struct net_device *, struct ethtool_drvinfo *); - int (*get_regs_len)(struct net_device *); - void (*get_regs)(struct net_device *, struct ethtool_regs *, void *); - void (*get_wol)(struct net_device *, struct ethtool_wolinfo *); - int (*set_wol)(struct net_device *, struct ethtool_wolinfo *); - u32 (*get_msglevel)(struct net_device *); - void (*set_msglevel)(struct net_device *, u32); - int (*nway_reset)(struct net_device *); - u32 (*get_link)(struct net_device *); - int (*get_eeprom_len)(struct net_device *); - int (*get_eeprom)(struct net_device *, struct ethtool_eeprom *, u8 *); - int (*set_eeprom)(struct net_device *, struct ethtool_eeprom *, u8 *); - int (*get_coalesce)(struct net_device *, struct ethtool_coalesce *); - int (*set_coalesce)(struct net_device *, struct ethtool_coalesce *); - void (*get_ringparam)(struct net_device *, struct ethtool_ringparam *); - int (*set_ringparam)(struct net_device *, struct ethtool_ringparam *); - void (*get_pauseparam)(struct net_device *, struct ethtool_pauseparam*); - int (*set_pauseparam)(struct net_device *, struct ethtool_pauseparam*); - u32 (*get_rx_csum)(struct net_device *); - int (*set_rx_csum)(struct net_device *, u32); - u32 (*get_tx_csum)(struct net_device *); - int (*set_tx_csum)(struct net_device *, u32); - u32 (*get_sg)(struct net_device *); - int (*set_sg)(struct net_device *, u32); - u32 (*get_tso)(struct net_device *); - int (*set_tso)(struct net_device *, u32); - int (*self_test_count)(struct net_device *); - void (*self_test)(struct net_device *, struct ethtool_test *, u64 *); - void (*get_strings)(struct net_device *, u32 stringset, u8 *); - int (*phys_id)(struct net_device *, u32); - int (*get_stats_count)(struct net_device *); - void (*get_ethtool_stats)(struct net_device *, struct ethtool_stats *, u64 *); - int (*get_perm_addr)(struct net_device *, struct ethtool_perm_addr *, u8 *); - int (*begin)(struct net_device *); - void (*complete)(struct net_device *); - u32 (*get_ufo)(struct net_device *); - int (*set_ufo)(struct net_device *, u32); +enum ethtool_flags { + ETH_FLAG_LRO = (1 << 15), /* LRO is enabled */ +}; + +struct ethtool_rxnfc { + __u32 cmd; + __u32 flow_type; + __u64 data; }; -#endif /* __KERNEL__ */ /* CMDs currently supported */ #define ETHTOOL_GSET 0x00000001 /* Get settings. */ @@ -414,6 +329,13 @@ struct ethtool_ops { #define ETHTOOL_SUFO 0x00000022 /* Set UFO enable (ethtool_value) */ #define ETHTOOL_GGSO 0x00000023 /* Get GSO enable (ethtool_value) */ #define ETHTOOL_SGSO 0x00000024 /* Set GSO enable (ethtool_value) */ +#define ETHTOOL_GFLAGS 0x00000025 /* Get flags bitmap(ethtool_value) */ +#define ETHTOOL_SFLAGS 0x00000026 /* Set flags bitmap(ethtool_value) */ +#define ETHTOOL_GPFLAGS 0x00000027 /* Get driver-private flags bitmap */ +#define ETHTOOL_SPFLAGS 0x00000028 /* Set driver-private flags bitmap */ + +#define ETHTOOL_GRXFH 0x00000029 /* Get RX flow hash configuration */ +#define ETHTOOL_SRXFH 0x0000002a /* Set RX flow hash configuration */ /* compatibility with older code */ #define SPARC_ETH_GSET ETHTOOL_GSET @@ -501,4 +423,26 @@ struct ethtool_ops { #define WAKE_MAGIC (1 << 5) #define WAKE_MAGICSECURE (1 << 6) /* only meaningful if WAKE_MAGIC */ +/* L3-L4 network traffic flow types */ +#define TCP_V4_FLOW 0x01 +#define UDP_V4_FLOW 0x02 +#define SCTP_V4_FLOW 0x03 +#define AH_ESP_V4_FLOW 0x04 +#define TCP_V6_FLOW 0x05 +#define UDP_V6_FLOW 0x06 +#define SCTP_V6_FLOW 0x07 +#define AH_ESP_V6_FLOW 0x08 + +/* L3-L4 network traffic flow hash options */ +#define RXH_DEV_PORT (1 << 0) +#define RXH_L2DA (1 << 1) +#define RXH_VLAN (1 << 2) +#define RXH_L3_PROTO (1 << 3) +#define RXH_IP_SRC (1 << 4) +#define RXH_IP_DST (1 << 5) +#define RXH_L4_B_0_1 (1 << 6) /* src port in case of TCP/UDP/SCTP */ +#define RXH_L4_B_2_3 (1 << 7) /* dst port in case of TCP/UDP/SCTP */ +#define RXH_DISCARD (1 << 31) + + #endif /* _LINUX_ETHTOOL_H */ diff --git a/ethtool.c b/ethtool.c index a668b49..768b92c 100644 --- a/ethtool.c +++ b/ethtool.c @@ -805,7 +805,7 @@ static int dump_ecmd(struct ethtool_cmd *ep) dump_advertised(ep); fprintf(stdout, " Speed: "); - switch (ep->speed) { + switch (ethtool_cmd_speed(ep)) { case SPEED_10: fprintf(stdout, "10Mb/s\n"); break; @@ -822,7 +822,7 @@ static int dump_ecmd(struct ethtool_cmd *ep) fprintf(stdout, "10000Mb/s\n"); break; default: - fprintf(stdout, "Unknown! (%i)\n", ep->speed); + fprintf(stdout, "Unknown! (%i)\n", ethtool_cmd_speed(ep)); break; }; @@ -1726,7 +1726,7 @@ static int do_sset(int fd, struct ifreq *ifr) } else { /* Change everything the user specified. */ if (speed_wanted != -1) - ecmd.speed = speed_wanted; + ethtool_cmd_speed_set(&ecmd, speed_wanted); if (duplex_wanted != -1) ecmd.duplex = duplex_wanted; if (port_wanted != -1) -- cgit v1.2.1