From f45bb4faddffed6de1932105b17e28d48f9c3127 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Thu, 26 Jul 2007 13:32:17 -0400 Subject: Update embedded copy of ethtool.h from kernel 2.6.23-rc1. Signed-off-by: Jeff Garzik --- ethtool-copy.h | 321 ++++++++++++++++++++++++++++++++++++++++----------------- 1 file changed, 224 insertions(+), 97 deletions(-) (limited to 'ethtool-copy.h') diff --git a/ethtool-copy.h b/ethtool-copy.h index 4615ef6..3a63224 100644 --- a/ethtool-copy.h +++ b/ethtool-copy.h @@ -2,7 +2,7 @@ * ethtool.h: Defines for Linux ethtool. * * Copyright (C) 1998 David S. Miller (davem@redhat.com) - * Copyright 2001 Jeff Garzik + * Copyright 2001 Jeff Garzik * Portions Copyright 2001 Sun Microsystems (thockin@sun.com) * Portions Copyright 2002 Intel (eli.kupermann@intel.com, * christopher.leech@intel.com, @@ -15,78 +15,78 @@ /* This should work for both 32 and 64 bit userland. */ struct ethtool_cmd { - u32 cmd; - u32 supported; /* Features this interface supports */ - u32 advertising; /* Features this interface advertises */ - u16 speed; /* The forced speed, 10Mb, 100Mb, gigabit */ - u8 duplex; /* Duplex, half or full */ - u8 port; /* Which connector port */ - u8 phy_address; - u8 transceiver; /* Which tranceiver to use */ - u8 autoneg; /* Enable or disable autonegotiation */ - u32 maxtxpkt; /* Tx pkts before generating tx int */ - u32 maxrxpkt; /* Rx pkts before generating rx int */ - u32 reserved[4]; + __u32 cmd; + __u32 supported; /* Features this interface supports */ + __u32 advertising; /* Features this interface advertises */ + __u16 speed; /* The forced speed, 10Mb, 100Mb, gigabit */ + __u8 duplex; /* Duplex, half or full */ + __u8 port; /* Which connector port */ + __u8 phy_address; + __u8 transceiver; /* Which transceiver to use */ + __u8 autoneg; /* Enable or disable autonegotiation */ + __u32 maxtxpkt; /* Tx pkts before generating tx int */ + __u32 maxrxpkt; /* Rx pkts before generating rx int */ + __u32 reserved[4]; }; #define ETHTOOL_BUSINFO_LEN 32 /* these strings are set to whatever the driver author decides... */ struct ethtool_drvinfo { - u32 cmd; + __u32 cmd; char driver[32]; /* driver short name, "tulip", "eepro100" */ char version[32]; /* driver version string */ char fw_version[32]; /* firmware version string, if applicable */ char bus_info[ETHTOOL_BUSINFO_LEN]; /* Bus info for this IF. */ - /* For PCI devices, use pci_dev->slot_name. */ + /* For PCI devices, use pci_name(pci_dev). */ char reserved1[32]; char reserved2[16]; - u32 n_stats; /* number of u64's from ETHTOOL_GSTATS */ - u32 testinfo_len; - u32 eedump_len; /* Size of data from ETHTOOL_GEEPROM (bytes) */ - u32 regdump_len; /* Size of data from ETHTOOL_GREGS (bytes) */ + __u32 n_stats; /* number of u64's from ETHTOOL_GSTATS */ + __u32 testinfo_len; + __u32 eedump_len; /* Size of data from ETHTOOL_GEEPROM (bytes) */ + __u32 regdump_len; /* Size of data from ETHTOOL_GREGS (bytes) */ }; #define SOPASS_MAX 6 /* wake-on-lan settings */ struct ethtool_wolinfo { - u32 cmd; - u32 supported; - u32 wolopts; - u8 sopass[SOPASS_MAX]; /* SecureOn(tm) password */ + __u32 cmd; + __u32 supported; + __u32 wolopts; + __u8 sopass[SOPASS_MAX]; /* SecureOn(tm) password */ }; /* for passing single values */ struct ethtool_value { - u32 cmd; - u32 data; + __u32 cmd; + __u32 data; }; /* for passing big chunks of data */ struct ethtool_regs { - u32 cmd; - u32 version; /* driver-specific, indicates different chips/revs */ - u32 len; /* bytes */ - u8 data[0]; + __u32 cmd; + __u32 version; /* driver-specific, indicates different chips/revs */ + __u32 len; /* bytes */ + __u8 data[0]; }; /* for passing EEPROM chunks */ struct ethtool_eeprom { - u32 cmd; - u32 magic; - u32 offset; /* in bytes */ - u32 len; /* in bytes */ - u8 data[0]; + __u32 cmd; + __u32 magic; + __u32 offset; /* in bytes */ + __u32 len; /* in bytes */ + __u8 data[0]; }; /* for configuring coalescing parameters of chip */ struct ethtool_coalesce { - u32 cmd; /* ETHTOOL_{G,S}COALESCE */ + __u32 cmd; /* ETHTOOL_{G,S}COALESCE */ /* How many usecs to delay an RX interrupt after * a packet arrives. If 0, only rx_max_coalesced_frames * is used. */ - u32 rx_coalesce_usecs; + __u32 rx_coalesce_usecs; /* How many packets to delay an RX interrupt after * a packet arrives. If 0, only rx_coalesce_usecs is @@ -94,21 +94,21 @@ struct ethtool_coalesce { * to zero as this would cause RX interrupts to never be * generated. */ - u32 rx_max_coalesced_frames; + __u32 rx_max_coalesced_frames; /* Same as above two parameters, except that these values - * apply while an IRQ is being services by the host. Not + * apply while an IRQ is being serviced by the host. Not * all cards support this feature and the values are ignored * in that case. */ - u32 rx_coalesce_usecs_irq; - u32 rx_max_coalesced_frames_irq; + __u32 rx_coalesce_usecs_irq; + __u32 rx_max_coalesced_frames_irq; /* How many usecs to delay a TX interrupt after * a packet is sent. If 0, only tx_max_coalesced_frames * is used. */ - u32 tx_coalesce_usecs; + __u32 tx_coalesce_usecs; /* How many packets to delay a TX interrupt after * a packet is sent. If 0, only tx_coalesce_usecs is @@ -116,22 +116,22 @@ struct ethtool_coalesce { * to zero as this would cause TX interrupts to never be * generated. */ - u32 tx_max_coalesced_frames; + __u32 tx_max_coalesced_frames; /* Same as above two parameters, except that these values - * apply while an IRQ is being services by the host. Not + * apply while an IRQ is being serviced by the host. Not * all cards support this feature and the values are ignored * in that case. */ - u32 tx_coalesce_usecs_irq; - u32 tx_max_coalesced_frames_irq; + __u32 tx_coalesce_usecs_irq; + __u32 tx_max_coalesced_frames_irq; /* How many usecs to delay in-memory statistics * block updates. Some drivers do not have an in-memory * statistic block, and in such cases this value is ignored. * This value must not be zero. */ - u32 stats_block_coalesce_usecs; + __u32 stats_block_coalesce_usecs; /* Adaptive RX/TX coalescing is an algorithm implemented by * some drivers to improve latency under low packet rates and @@ -140,18 +140,18 @@ struct ethtool_coalesce { * not implemented by the driver causes these values to be * silently ignored. */ - u32 use_adaptive_rx_coalesce; - u32 use_adaptive_tx_coalesce; + __u32 use_adaptive_rx_coalesce; + __u32 use_adaptive_tx_coalesce; /* When the packet rate (measured in packets per second) * is below pkt_rate_low, the {rx,tx}_*_low parameters are * used. */ - u32 pkt_rate_low; - u32 rx_coalesce_usecs_low; - u32 rx_max_coalesced_frames_low; - u32 tx_coalesce_usecs_low; - u32 tx_max_coalesced_frames_low; + __u32 pkt_rate_low; + __u32 rx_coalesce_usecs_low; + __u32 rx_max_coalesced_frames_low; + __u32 tx_coalesce_usecs_low; + __u32 tx_max_coalesced_frames_low; /* When the packet rate is below pkt_rate_high but above * pkt_rate_low (both measured in packets per second) the @@ -162,43 +162,43 @@ struct ethtool_coalesce { * is above pkt_rate_high, the {rx,tx}_*_high parameters are * used. */ - u32 pkt_rate_high; - u32 rx_coalesce_usecs_high; - u32 rx_max_coalesced_frames_high; - u32 tx_coalesce_usecs_high; - u32 tx_max_coalesced_frames_high; + __u32 pkt_rate_high; + __u32 rx_coalesce_usecs_high; + __u32 rx_max_coalesced_frames_high; + __u32 tx_coalesce_usecs_high; + __u32 tx_max_coalesced_frames_high; /* How often to do adaptive coalescing packet rate sampling, * measured in seconds. Must not be zero. */ - u32 rate_sample_interval; + __u32 rate_sample_interval; }; /* for configuring RX/TX ring parameters */ struct ethtool_ringparam { - u32 cmd; /* ETHTOOL_{G,S}RINGPARAM */ + __u32 cmd; /* ETHTOOL_{G,S}RINGPARAM */ /* Read only attributes. These indicate the maximum number * of pending RX/TX ring entries the driver will allow the * user to set. */ - u32 rx_max_pending; - u32 rx_mini_max_pending; - u32 rx_jumbo_max_pending; - u32 tx_max_pending; + __u32 rx_max_pending; + __u32 rx_mini_max_pending; + __u32 rx_jumbo_max_pending; + __u32 tx_max_pending; /* Values changeable by the user. The valid values are * in the range 1 to the "*_max_pending" counterpart above. */ - u32 rx_pending; - u32 rx_mini_pending; - u32 rx_jumbo_pending; - u32 tx_pending; + __u32 rx_pending; + __u32 rx_mini_pending; + __u32 rx_jumbo_pending; + __u32 tx_pending; }; /* for configuring link flow control parameters */ struct ethtool_pauseparam { - u32 cmd; /* ETHTOOL_{G,S}PAUSEPARAM */ + __u32 cmd; /* ETHTOOL_{G,S}PAUSEPARAM */ /* If the link is being auto-negotiated (via ethtool_cmd.autoneg * being true) the user may set 'autonet' here non-zero to have the @@ -210,9 +210,9 @@ struct ethtool_pauseparam { * then {rx,tx}_pause force the driver to use/not-use pause * flow control. */ - u32 autoneg; - u32 rx_pause; - u32 tx_pause; + __u32 autoneg; + __u32 rx_pause; + __u32 tx_pause; }; #define ETH_GSTRING_LEN 32 @@ -223,10 +223,10 @@ enum ethtool_stringset { /* for passing string sets for data tagging */ struct ethtool_gstrings { - u32 cmd; /* ETHTOOL_GSTRINGS */ - u32 string_set; /* string set id e.c. ETH_SS_TEST, etc*/ - u32 len; /* number of strings in the string set */ - u8 data[0]; + __u32 cmd; /* ETHTOOL_GSTRINGS */ + __u32 string_set; /* string set id e.c. ETH_SS_TEST, etc*/ + __u32 len; /* number of strings in the string set */ + __u8 data[0]; }; enum ethtool_test_flags { @@ -236,39 +236,165 @@ enum ethtool_test_flags { /* for requesting NIC test and getting results*/ struct ethtool_test { - u32 cmd; /* ETHTOOL_TEST */ - u32 flags; /* ETH_TEST_FL_xxx */ - u32 reserved; - u32 len; /* result length, in number of u64 elements */ - u64 data[0]; + __u32 cmd; /* ETHTOOL_TEST */ + __u32 flags; /* ETH_TEST_FL_xxx */ + __u32 reserved; + __u32 len; /* result length, in number of u64 elements */ + __u64 data[0]; }; /* for dumping NIC-specific statistics */ struct ethtool_stats { - u32 cmd; /* ETHTOOL_GSTATS */ - u32 n_stats; /* number of u64's being returned */ - u64 data[0]; + __u32 cmd; /* ETHTOOL_GSTATS */ + __u32 n_stats; /* number of u64's being returned */ + __u64 data[0]; }; +struct ethtool_perm_addr { + __u32 cmd; /* ETHTOOL_GPERMADDR */ + __u32 size; + __u8 data[0]; +}; + +#ifdef __KERNEL__ + +struct net_device; + +/* Some generic methods drivers may use in their ethtool_ops */ +u32 ethtool_op_get_link(struct net_device *dev); +u32 ethtool_op_get_tx_csum(struct net_device *dev); +int ethtool_op_set_tx_csum(struct net_device *dev, u32 data); +int ethtool_op_set_tx_hw_csum(struct net_device *dev, u32 data); +int ethtool_op_set_tx_ipv6_csum(struct net_device *dev, u32 data); +u32 ethtool_op_get_sg(struct net_device *dev); +int ethtool_op_set_sg(struct net_device *dev, u32 data); +u32 ethtool_op_get_tso(struct net_device *dev); +int ethtool_op_set_tso(struct net_device *dev, u32 data); +int ethtool_op_get_perm_addr(struct net_device *dev, + struct ethtool_perm_addr *addr, u8 *data); +u32 ethtool_op_get_ufo(struct net_device *dev); +int ethtool_op_set_ufo(struct net_device *dev, u32 data); + +/** + * ðtool_ops - Alter and report network device settings + * get_settings: Get device-specific settings + * set_settings: Set device-specific settings + * get_drvinfo: Report driver information + * get_regs: Get device registers + * get_wol: Report whether Wake-on-Lan is enabled + * set_wol: Turn Wake-on-Lan on or off + * get_msglevel: Report driver message level + * set_msglevel: Set driver message level + * nway_reset: Restart autonegotiation + * get_link: Get link status + * get_eeprom: Read data from the device EEPROM + * set_eeprom: Write data to the device EEPROM + * get_coalesce: Get interrupt coalescing parameters + * set_coalesce: Set interrupt coalescing parameters + * get_ringparam: Report ring sizes + * set_ringparam: Set ring sizes + * get_pauseparam: Report pause parameters + * set_pauseparam: Set pause paramters + * get_rx_csum: Report whether receive checksums are turned on or off + * set_rx_csum: Turn receive checksum on or off + * get_tx_csum: Report whether transmit checksums are turned on or off + * set_tx_csum: Turn transmit checksums on or off + * get_sg: Report whether scatter-gather is enabled + * set_sg: Turn scatter-gather on or off + * get_tso: Report whether TCP segmentation offload is enabled + * set_tso: Turn TCP segmentation offload on or off + * get_ufo: Report whether UDP fragmentation offload is enabled + * set_ufo: Turn UDP fragmentation offload on or off + * self_test: Run specified self-tests + * get_strings: Return a set of strings that describe the requested objects + * phys_id: Identify the device + * get_stats: Return statistics about the device + * get_perm_addr: Gets the permanent hardware address + * + * Description: + * + * get_settings: + * @get_settings is passed an ðtool_cmd to fill in. It returns + * an negative errno or zero. + * + * set_settings: + * @set_settings is passed an ðtool_cmd and should attempt to set + * all the settings this device supports. It may return an error value + * if something goes wrong (otherwise 0). + * + * get_eeprom: + * Should fill in the magic field. Don't need to check len for zero + * or wraparound. Fill in the data argument with the eeprom values + * from offset to offset + len. Update len to the amount read. + * Returns an error or zero. + * + * set_eeprom: + * Should validate the magic field. Don't need to check len for zero + * or wraparound. Update len to the amount written. Returns an error + * or zero. + */ +struct ethtool_ops { + int (*get_settings)(struct net_device *, struct ethtool_cmd *); + int (*set_settings)(struct net_device *, struct ethtool_cmd *); + void (*get_drvinfo)(struct net_device *, struct ethtool_drvinfo *); + int (*get_regs_len)(struct net_device *); + void (*get_regs)(struct net_device *, struct ethtool_regs *, void *); + void (*get_wol)(struct net_device *, struct ethtool_wolinfo *); + int (*set_wol)(struct net_device *, struct ethtool_wolinfo *); + u32 (*get_msglevel)(struct net_device *); + void (*set_msglevel)(struct net_device *, u32); + int (*nway_reset)(struct net_device *); + u32 (*get_link)(struct net_device *); + int (*get_eeprom_len)(struct net_device *); + int (*get_eeprom)(struct net_device *, struct ethtool_eeprom *, u8 *); + int (*set_eeprom)(struct net_device *, struct ethtool_eeprom *, u8 *); + int (*get_coalesce)(struct net_device *, struct ethtool_coalesce *); + int (*set_coalesce)(struct net_device *, struct ethtool_coalesce *); + void (*get_ringparam)(struct net_device *, struct ethtool_ringparam *); + int (*set_ringparam)(struct net_device *, struct ethtool_ringparam *); + void (*get_pauseparam)(struct net_device *, struct ethtool_pauseparam*); + int (*set_pauseparam)(struct net_device *, struct ethtool_pauseparam*); + u32 (*get_rx_csum)(struct net_device *); + int (*set_rx_csum)(struct net_device *, u32); + u32 (*get_tx_csum)(struct net_device *); + int (*set_tx_csum)(struct net_device *, u32); + u32 (*get_sg)(struct net_device *); + int (*set_sg)(struct net_device *, u32); + u32 (*get_tso)(struct net_device *); + int (*set_tso)(struct net_device *, u32); + int (*self_test_count)(struct net_device *); + void (*self_test)(struct net_device *, struct ethtool_test *, u64 *); + void (*get_strings)(struct net_device *, u32 stringset, u8 *); + int (*phys_id)(struct net_device *, u32); + int (*get_stats_count)(struct net_device *); + void (*get_ethtool_stats)(struct net_device *, struct ethtool_stats *, u64 *); + int (*get_perm_addr)(struct net_device *, struct ethtool_perm_addr *, u8 *); + int (*begin)(struct net_device *); + void (*complete)(struct net_device *); + u32 (*get_ufo)(struct net_device *); + int (*set_ufo)(struct net_device *, u32); +}; +#endif /* __KERNEL__ */ + /* CMDs currently supported */ #define ETHTOOL_GSET 0x00000001 /* Get settings. */ -#define ETHTOOL_SSET 0x00000002 /* Set settings, privileged. */ +#define ETHTOOL_SSET 0x00000002 /* Set settings. */ #define ETHTOOL_GDRVINFO 0x00000003 /* Get driver info. */ -#define ETHTOOL_GREGS 0x00000004 /* Get NIC registers, privileged. */ +#define ETHTOOL_GREGS 0x00000004 /* Get NIC registers. */ #define ETHTOOL_GWOL 0x00000005 /* Get wake-on-lan options. */ -#define ETHTOOL_SWOL 0x00000006 /* Set wake-on-lan options, priv. */ +#define ETHTOOL_SWOL 0x00000006 /* Set wake-on-lan options. */ #define ETHTOOL_GMSGLVL 0x00000007 /* Get driver message level */ -#define ETHTOOL_SMSGLVL 0x00000008 /* Set driver msg level, priv. */ -#define ETHTOOL_NWAY_RST 0x00000009 /* Restart autonegotiation, priv. */ +#define ETHTOOL_SMSGLVL 0x00000008 /* Set driver msg level. */ +#define ETHTOOL_NWAY_RST 0x00000009 /* Restart autonegotiation. */ #define ETHTOOL_GLINK 0x0000000a /* Get link status (ethtool_value) */ #define ETHTOOL_GEEPROM 0x0000000b /* Get EEPROM data */ -#define ETHTOOL_SEEPROM 0x0000000c /* Set EEPROM data, priv. */ +#define ETHTOOL_SEEPROM 0x0000000c /* Set EEPROM data. */ #define ETHTOOL_GCOALESCE 0x0000000e /* Get coalesce config */ -#define ETHTOOL_SCOALESCE 0x0000000f /* Set coalesce config, priv. */ +#define ETHTOOL_SCOALESCE 0x0000000f /* Set coalesce config. */ #define ETHTOOL_GRINGPARAM 0x00000010 /* Get ring parameters */ -#define ETHTOOL_SRINGPARAM 0x00000011 /* Set ring parameters, priv. */ +#define ETHTOOL_SRINGPARAM 0x00000011 /* Set ring parameters. */ #define ETHTOOL_GPAUSEPARAM 0x00000012 /* Get pause parameters */ -#define ETHTOOL_SPAUSEPARAM 0x00000013 /* Set pause parameters, priv. */ +#define ETHTOOL_SPAUSEPARAM 0x00000013 /* Set pause parameters. */ #define ETHTOOL_GRXCSUM 0x00000014 /* Get RX hw csum enable (ethtool_value) */ #define ETHTOOL_SRXCSUM 0x00000015 /* Set RX hw csum enable (ethtool_value) */ #define ETHTOOL_GTXCSUM 0x00000016 /* Get TX hw csum enable (ethtool_value) */ @@ -276,13 +402,14 @@ struct ethtool_stats { #define ETHTOOL_GSG 0x00000018 /* Get scatter-gather enable * (ethtool_value) */ #define ETHTOOL_SSG 0x00000019 /* Set scatter-gather enable - * (ethtool_value), priv. */ -#define ETHTOOL_TEST 0x0000001a /* execute NIC self-test, priv. */ + * (ethtool_value). */ +#define ETHTOOL_TEST 0x0000001a /* execute NIC self-test. */ #define ETHTOOL_GSTRINGS 0x0000001b /* get specified string set */ #define ETHTOOL_PHYS_ID 0x0000001c /* identify the NIC */ #define ETHTOOL_GSTATS 0x0000001d /* get NIC-specific statistics */ #define ETHTOOL_GTSO 0x0000001e /* Get TSO enable (ethtool_value) */ #define ETHTOOL_STSO 0x0000001f /* Set TSO enable (ethtool_value) */ +#define ETHTOOL_GPERMADDR 0x00000020 /* Get permanent hardware address */ #define ETHTOOL_GUFO 0x00000021 /* Get UFO enable (ethtool_value) */ #define ETHTOOL_SUFO 0x00000022 /* Set UFO enable (ethtool_value) */ #define ETHTOOL_GGSO 0x00000023 /* Get GSO enable (ethtool_value) */ @@ -334,7 +461,7 @@ struct ethtool_stats { * it was foced up into this mode or autonegotiated. */ -/* The forced speed, 10Mb, 100Mb, gigabit, 10GbE. */ +/* The forced speed, 10Mb, 100Mb, gigabit, 2.5Gb, 10GbE. */ #define SPEED_10 10 #define SPEED_100 100 #define SPEED_1000 1000 @@ -352,7 +479,7 @@ struct ethtool_stats { #define PORT_FIBRE 0x03 #define PORT_BNC 0x04 -/* Which tranceiver to use. */ +/* Which transceiver to use. */ #define XCVR_INTERNAL 0x00 #define XCVR_EXTERNAL 0x01 #define XCVR_DUMMY1 0x02 -- cgit v1.2.1