summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorHans de Goede <hdegoede@redhat.com>2016-04-27 20:38:44 +0200
committerMark Brown <broonie@kernel.org>2016-04-29 11:43:50 +0100
commitf40d4896bf3284573f1e70e8840c1bcfe1c6bf2d (patch)
treef42c1ef40645920f02a8fc7270c019a27b9317ed
parenta2262e5a12e05389ab4c7fc5cf60016b041dd8dc (diff)
downloadlinux-f40d4896bf3284573f1e70e8840c1bcfe1c6bf2d.tar.gz
regulator: axp20x: Fix axp22x ldo_io registration error on cold boot
The maximum supported voltage for ldo_io# is 3.3V, but on cold boot the selector comes up at 0x1f, which maps to 3.8V. This causes _regulator_get_voltage() to fail with -EINVAL which causes regulator registration to fail when constrains are used: [ 1.467788] vcc-touchscreen: failed to get the current voltage(-22) [ 1.474209] axp20x-regulator axp20x-regulator: Failed to register ldo_io1 [ 1.483363] axp20x-regulator: probe of axp20x-regulator failed with error -22 This commits makes the axp20x regulator driver accept the 0x1f register value, fixing this. The datasheet does not guarantee reliable operation above 3.3V, so on boards where this regulator is used the regulator-max-microvolt setting must be 3.3V or less. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-rw-r--r--drivers/regulator/axp20x-regulator.c8
1 files changed, 6 insertions, 2 deletions
diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c
index 89f684295657..514a5e8fdbab 100644
--- a/drivers/regulator/axp20x-regulator.c
+++ b/drivers/regulator/axp20x-regulator.c
@@ -217,10 +217,14 @@ static const struct regulator_desc axp22x_regulators[] = {
AXP22X_ELDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(1)),
AXP_DESC(AXP22X, ELDO3, "eldo3", "eldoin", 700, 3300, 100,
AXP22X_ELDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(2)),
- AXP_DESC_IO(AXP22X, LDO_IO0, "ldo_io0", "ips", 700, 3300, 100,
+ /* Note the datasheet only guarantees reliable operation up to
+ * 3.3V, this needs to be enforced via dts provided constraints */
+ AXP_DESC_IO(AXP22X, LDO_IO0, "ldo_io0", "ips", 700, 3800, 100,
AXP22X_LDO_IO0_V_OUT, 0x1f, AXP20X_GPIO0_CTRL, 0x07,
AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
- AXP_DESC_IO(AXP22X, LDO_IO1, "ldo_io1", "ips", 700, 3300, 100,
+ /* Note the datasheet only guarantees reliable operation up to
+ * 3.3V, this needs to be enforced via dts provided constraints */
+ AXP_DESC_IO(AXP22X, LDO_IO1, "ldo_io1", "ips", 700, 3800, 100,
AXP22X_LDO_IO1_V_OUT, 0x1f, AXP20X_GPIO1_CTRL, 0x07,
AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
AXP_DESC_FIXED(AXP22X, RTC_LDO, "rtc_ldo", "ips", 3000),