summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2016-05-24 11:00:20 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2016-05-24 11:00:20 -0700
commit8bc4d5f394a3facbad6af2f18940f1db3b1a0844 (patch)
tree14838a236e87126d4b84d22b9049b9a6f0be878f
parent29567292c0b5b2fb484125c280a2175141fe2205 (diff)
parente5366a266a8cd4cd6b0fe66876462cca2e1c6a89 (diff)
downloadlinux-8bc4d5f394a3facbad6af2f18940f1db3b1a0844.tar.gz
Merge tag 'for-linus-20160523' of git://git.infradead.org/linux-mtd
Pull MTD updates from Brian Norris: "First cycle with Boris as NAND maintainer! Many (most) bullets stolen from him. Generic: - Migrated NAND LED trigger to be a generic MTD trigger NAND: - Introduction of the "ECC algorithm" concept, to avoid overloading the ECC mode field too much more - Replaced the nand_ecclayout infrastructure with something a little more flexible (finally!) and future proof - Rework of the OMAP GPMC and NAND drivers; the TI folks pulled some of this into their own tree as well - Prepare the sunxi NAND driver to receive DMA support - Handle bitflips in erased pages on GPMI revisions that do not support this in hardware. SPI NOR: - Start using the spi_flash_read() API for SPI drivers that support it (i.e., SPI drivers with special memory-mapped flash modes) And other small scattered improvments" * tag 'for-linus-20160523' of git://git.infradead.org/linux-mtd: (155 commits) mtd: spi-nor: support GigaDevice gd25lq64c mtd: nand_bch: fix spelling of "probably" mtd: brcmnand: respect ECC algorithm set by NAND subsystem gpmi-nand: Handle ECC Errors in erased pages Documentation: devicetree: deprecate "soft_bch" nand-ecc-mode value mtd: nand: add support for "nand-ecc-algo" DT property mtd: mtd: drop NAND_ECC_SOFT_BCH enum value mtd: drop support for NAND_ECC_SOFT_BCH as "soft_bch" mapping mtd: nand: read ECC algorithm from the new field mtd: nand: fsmc: validate ECC setup by checking algorithm directly mtd: nand: set ECC algorithm to Hamming on fallback staging: mt29f_spinand: set ECC algorithm explicitly CRIS v32: nand: set ECC algorithm explicitly mtd: nand: atmel: set ECC algorithm explicitly mtd: nand: davinci: set ECC algorithm explicitly mtd: nand: bf5xx: set ECC algorithm explicitly mtd: nand: omap2: Fix high memory dma prefetch transfer mtd: nand: omap2: Start dma request before enabling prefetch mtd: nandsim: add __init attribute mtd: nand: move of_get_nand_xxx() helpers into nand_base.c ...
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt (renamed from Documentation/devicetree/bindings/bus/ti-gpmc.txt)17
-rw-r--r--Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt1
-rw-r--r--Documentation/devicetree/bindings/mtd/gpmc-nand.txt19
-rw-r--r--Documentation/devicetree/bindings/mtd/nand.txt45
-rw-r--r--arch/arm/mach-omap2/gpmc-nand.c7
-rw-r--r--arch/arm/mach-pxa/spitz.c55
-rw-r--r--arch/cris/arch-v32/drivers/mach-a3/nandflash.c1
-rw-r--r--arch/cris/arch-v32/drivers/mach-fs/nandflash.c1
-rw-r--r--arch/mips/include/asm/mach-jz4740/jz4740_nand.h2
-rw-r--r--arch/mips/jz4740/board-qi_lb60.c87
-rw-r--r--drivers/bcma/driver_chipcommon_sflash.c1
-rw-r--r--drivers/memory/Kconfig1
-rw-r--r--drivers/memory/fsl_ifc.c36
-rw-r--r--drivers/memory/omap-gpmc.c657
-rw-r--r--drivers/mtd/chips/Kconfig1
-rw-r--r--drivers/mtd/devices/bcm47xxsflash.c29
-rw-r--r--drivers/mtd/devices/bcm47xxsflash.h3
-rw-r--r--drivers/mtd/devices/docg3.c46
-rw-r--r--drivers/mtd/devices/m25p80.c22
-rw-r--r--drivers/mtd/devices/pmc551.c2
-rw-r--r--drivers/mtd/maps/ck804xrom.c4
-rw-r--r--drivers/mtd/maps/esb2rom.c4
-rw-r--r--drivers/mtd/maps/ichxrom.c4
-rw-r--r--drivers/mtd/maps/uclinux.c27
-rw-r--r--drivers/mtd/mtdchar.c123
-rw-r--r--drivers/mtd/mtdconcat.c2
-rw-r--r--drivers/mtd/mtdcore.c360
-rw-r--r--drivers/mtd/mtdpart.c23
-rw-r--r--drivers/mtd/nand/ams-delta.c1
-rw-r--r--drivers/mtd/nand/atmel_nand.c315
-rw-r--r--drivers/mtd/nand/au1550nd.c1
-rw-r--r--drivers/mtd/nand/bf5xx_nand.c52
-rw-r--r--drivers/mtd/nand/brcmnand/brcmnand.c290
-rw-r--r--drivers/mtd/nand/cafe_nand.c44
-rw-r--r--drivers/mtd/nand/cmx270_nand.c1
-rw-r--r--drivers/mtd/nand/davinci_nand.c210
-rw-r--r--drivers/mtd/nand/denali.c50
-rw-r--r--drivers/mtd/nand/diskonchip.c60
-rw-r--r--drivers/mtd/nand/docg4.c33
-rw-r--r--drivers/mtd/nand/fsl_elbc_nand.c84
-rw-r--r--drivers/mtd/nand/fsl_ifc_nand.c317
-rw-r--r--drivers/mtd/nand/fsl_upm.c1
-rw-r--r--drivers/mtd/nand/fsmc_nand.c332
-rw-r--r--drivers/mtd/nand/gpio.c1
-rw-r--r--drivers/mtd/nand/gpmi-nand/gpmi-nand.c161
-rw-r--r--drivers/mtd/nand/hisi504_nand.c40
-rw-r--r--drivers/mtd/nand/jz4740_nand.c3
-rw-r--r--drivers/mtd/nand/jz4780_bch.c1
-rw-r--r--drivers/mtd/nand/jz4780_nand.c21
-rw-r--r--drivers/mtd/nand/lpc32xx_mlc.c51
-rw-r--r--drivers/mtd/nand/lpc32xx_slc.c83
-rw-r--r--drivers/mtd/nand/mpc5121_nfc.c1
-rw-r--r--drivers/mtd/nand/mxc_nand.c257
-rw-r--r--drivers/mtd/nand/nand_base.c637
-rw-r--r--drivers/mtd/nand/nand_bch.c48
-rw-r--r--drivers/mtd/nand/nandsim.c10
-rw-r--r--drivers/mtd/nand/nuc900_nand.c1
-rw-r--r--drivers/mtd/nand/omap2.c448
-rw-r--r--drivers/mtd/nand/orion_nand.c1
-rw-r--r--drivers/mtd/nand/pasemi_nand.c16
-rw-r--r--drivers/mtd/nand/plat_nand.c1
-rw-r--r--drivers/mtd/nand/pxa3xx_nand.c132
-rw-r--r--drivers/mtd/nand/qcom_nandc.c88
-rw-r--r--drivers/mtd/nand/s3c2410.c36
-rw-r--r--drivers/mtd/nand/sh_flctl.c115
-rw-r--r--drivers/mtd/nand/sharpsl.c2
-rw-r--r--drivers/mtd/nand/sm_common.c93
-rw-r--r--drivers/mtd/nand/socrates_nand.c1
-rw-r--r--drivers/mtd/nand/sunxi_nand.c600
-rw-r--r--drivers/mtd/nand/vf610_nfc.c35
-rw-r--r--drivers/mtd/onenand/onenand_base.c235
-rw-r--r--drivers/mtd/spi-nor/spi-nor.c1
-rw-r--r--drivers/of/Makefile1
-rw-r--r--drivers/of/of_mtd.c119
-rw-r--r--drivers/staging/mt29f_spinand/mt29f_spinand.c49
-rw-r--r--include/linux/bcma/bcma_driver_chipcommon.h1
-rw-r--r--include/linux/fsl_ifc.h45
-rw-r--r--include/linux/mtd/fsmc.h18
-rw-r--r--include/linux/mtd/map.h19
-rw-r--r--include/linux/mtd/mtd.h63
-rw-r--r--include/linux/mtd/nand.h28
-rw-r--r--include/linux/mtd/onenand.h2
-rw-r--r--include/linux/mtd/sharpsl.h2
-rw-r--r--include/linux/mtd/spi-nor.h1
-rw-r--r--include/linux/of_mtd.h50
-rw-r--r--include/linux/omap-gpmc.h172
-rw-r--r--include/linux/platform_data/gpmc-omap.h172
-rw-r--r--include/linux/platform_data/mtd-nand-omap2.h12
-rw-r--r--include/uapi/mtd/mtd-abi.h2
89 files changed, 4338 insertions, 2908 deletions
diff --git a/Documentation/devicetree/bindings/bus/ti-gpmc.txt b/Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
index 01683707060b..21055e210234 100644
--- a/Documentation/devicetree/bindings/bus/ti-gpmc.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
@@ -32,6 +32,19 @@ Required properties:
bootloader) are used for the physical address decoding.
As this will change in the future, filling correct
values here is a requirement.
+ - interrupt-controller: The GPMC driver implements and interrupt controller for
+ the NAND events "fifoevent" and "termcount" plus the
+ rising/falling edges on the GPMC_WAIT pins.
+ The interrupt number mapping is as follows
+ 0 - NAND_fifoevent
+ 1 - NAND_termcount
+ 2 - GPMC_WAIT0 pin edge
+ 3 - GPMC_WAIT1 pin edge, and so on.
+ - interrupt-cells: Must be set to 2
+ - gpio-controller: The GPMC driver implements a GPIO controller for the
+ GPMC WAIT pins that can be used as general purpose inputs.
+ 0 maps to GPMC_WAIT0 pin.
+ - gpio-cells: Must be set to 2
Timing properties for child nodes. All are optional and default to 0.
@@ -130,6 +143,10 @@ Example for an AM33xx board:
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0x08000000 0x10000000>; /* CS0 @addr 0x8000000, size 0x10000000 */
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
/* child nodes go here */
};
diff --git a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt
index 0f6985b5de49..7066597c9a81 100644
--- a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt
+++ b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt
@@ -24,6 +24,7 @@ Required properties:
brcm,brcmnand-v5.0
brcm,brcmnand-v6.0
brcm,brcmnand-v6.1
+ brcm,brcmnand-v6.2
brcm,brcmnand-v7.0
brcm,brcmnand-v7.1
brcm,brcmnand
diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
index fb733c4e1c11..3ee7e202657c 100644
--- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
@@ -13,7 +13,11 @@ Documentation/devicetree/bindings/mtd/nand.txt
Required properties:
- - reg: The CS line the peripheral is connected to
+ - compatible: "ti,omap2-nand"
+ - reg: range id (CS number), base offset and length of the
+ NAND I/O space
+ - interrupt-parent: must point to gpmc node
+ - interrupts: Two interrupt specifiers, one for fifoevent, one for termcount.
Optional properties:
@@ -44,6 +48,7 @@ Optional properties:
locating ECC errors for BCHx algorithms. SoC devices which have
ELM hardware engines should specify this device node in .dtsi
Using ELM for ECC error correction frees some CPU cycles.
+ - rb-gpios: GPIO specifier for the ready/busy# pin.
For inline partition table parsing (optional):
@@ -55,20 +60,26 @@ Example for an AM33xx board:
gpmc: gpmc@50000000 {
compatible = "ti,am3352-gpmc";
ti,hwmods = "gpmc";
- reg = <0x50000000 0x1000000>;
+ reg = <0x50000000 0x36c>;
interrupts = <100>;
gpmc,num-cs = <8>;
gpmc,num-waitpins = <2>;
#address-cells = <2>;
#size-cells = <1>;
- ranges = <0 0 0x08000000 0x2000>; /* CS0: NAND */
+ ranges = <0 0 0x08000000 0x1000000>; /* CS0 space, 16MB */
elm_id = <&elm>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
nand@0,0 {
- reg = <0 0 0>; /* CS0, offset 0 */
+ compatible = "ti,omap2-nand";
+ reg = <0 0 4>; /* CS0, offset 0, NAND I/O window 4 */
+ interrupt-parent = <&gpmc>;
+ interrupts = <0 IRQ_TYPE_NONE>, <1 IRQ_TYPE NONE>;
nand-bus-width = <16>;
ti,nand-ecc-opt = "bch8";
ti,nand-xfer-type = "polled";
+ rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
gpmc,sync-clk-ps = <0>;
gpmc,cs-on-ns = <0>;
diff --git a/Documentation/devicetree/bindings/mtd/nand.txt b/Documentation/devicetree/bindings/mtd/nand.txt
index b53f92e252d4..68342eac2383 100644
--- a/Documentation/devicetree/bindings/mtd/nand.txt
+++ b/Documentation/devicetree/bindings/mtd/nand.txt
@@ -1,8 +1,31 @@
-* MTD generic binding
+* NAND chip and NAND controller generic binding
+
+NAND controller/NAND chip representation:
+
+The NAND controller should be represented with its own DT node, and all
+NAND chips attached to this controller should be defined as children nodes
+of the NAND controller. This representation should be enforced even for
+simple controllers supporting only one chip.
+
+Mandatory NAND controller properties:
+- #address-cells: depends on your controller. Should at least be 1 to
+ encode the CS line id.
+- #size-cells: depends on your controller. Put zero unless you need a
+ mapping between CS lines and dedicated memory regions
+
+Optional NAND controller properties
+- ranges: only needed if you need to define a mapping between CS lines and
+ memory regions
+
+Optional NAND chip properties:
- nand-ecc-mode : String, operation mode of the NAND ecc mode.
- Supported values are: "none", "soft", "hw", "hw_syndrome", "hw_oob_first",
- "soft_bch".
+ Supported values are: "none", "soft", "hw", "hw_syndrome",
+ "hw_oob_first".
+ Deprecated values:
+ "soft_bch": use "soft" and nand-ecc-algo instead
+- nand-ecc-algo: string, algorithm of NAND ECC.
+ Supported values are: "hamming", "bch".
- nand-bus-width : 8 or 16 bus width if not present 8
- nand-on-flash-bbt: boolean to enable on flash bbt option if not present false
@@ -19,3 +42,19 @@ errors per {size} bytes".
The interpretation of these parameters is implementation-defined, so not all
implementations must support all possible combinations. However, implementations
are encouraged to further specify the value(s) they support.
+
+Example:
+
+ nand-controller {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* controller specific properties */
+
+ nand@0 {
+ reg = <0>;
+ nand-ecc-mode = "soft_bch";
+
+ /* controller specific properties */
+ };
+ };
diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c
index 72918c4973ea..f6ac027f3c3b 100644
--- a/arch/arm/mach-omap2/gpmc-nand.c
+++ b/arch/arm/mach-omap2/gpmc-nand.c
@@ -97,10 +97,7 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
gpmc_nand_res[2].start = gpmc_get_client_irq(GPMC_IRQ_COUNT_EVENT);
memset(&s, 0, sizeof(struct gpmc_settings));
- if (gpmc_nand_data->of_node)
- gpmc_read_settings_dt(gpmc_nand_data->of_node, &s);
- else
- gpmc_set_legacy(gpmc_nand_data, &s);
+ gpmc_set_legacy(gpmc_nand_data, &s);
s.device_nand = true;
@@ -121,8 +118,6 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
if (err < 0)
goto out_free_cs;
- gpmc_update_nand_reg(&gpmc_nand_data->reg, gpmc_nand_data->cs);
-
if (!gpmc_hwecc_bch_capable(gpmc_nand_data->ecc_opt)) {
pr_err("omap2-nand: Unsupported NAND ECC scheme selected\n");
err = -EINVAL;
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index d9578bc49fdc..bd7cd8b6a286 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -763,14 +763,49 @@ static struct nand_bbt_descr spitz_nand_bbt = {
.pattern = scan_ff_pattern
};
-static struct nand_ecclayout akita_oobinfo = {
- .oobfree = { {0x08, 0x09} },
- .eccbytes = 24,
- .eccpos = {
- 0x05, 0x01, 0x02, 0x03, 0x06, 0x07, 0x15, 0x11,
- 0x12, 0x13, 0x16, 0x17, 0x25, 0x21, 0x22, 0x23,
- 0x26, 0x27, 0x35, 0x31, 0x32, 0x33, 0x36, 0x37,
- },
+static int akita_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section > 12)
+ return -ERANGE;
+
+ switch (section % 3) {
+ case 0:
+ oobregion->offset = 5;
+ oobregion->length = 1;
+ break;
+
+ case 1:
+ oobregion->offset = 1;
+ oobregion->length = 3;
+ break;
+
+ case 2:
+ oobregion->offset = 6;
+ oobregion->length = 2;
+ break;
+ }
+
+ oobregion->offset += (section / 3) * 0x10;
+
+ return 0;
+}
+
+static int akita_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section)
+ return -ERANGE;
+
+ oobregion->offset = 8;
+ oobregion->length = 9;
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops akita_ooblayout_ops = {
+ .ecc = akita_ooblayout_ecc,
+ .free = akita_ooblayout_free,
};
static struct sharpsl_nand_platform_data spitz_nand_pdata = {
@@ -804,11 +839,11 @@ static void __init spitz_nand_init(void)
} else if (machine_is_akita()) {
spitz_nand_partitions[1].size = 58 * 1024 * 1024;
spitz_nand_bbt.len = 1;
- spitz_nand_pdata.ecc_layout = &akita_oobinfo;
+ spitz_nand_pdata.ecc_layout = &akita_ooblayout_ops;
} else if (machine_is_borzoi()) {
spitz_nand_partitions[1].size = 32 * 1024 * 1024;
spitz_nand_bbt.len = 1;
- spitz_nand_pdata.ecc_layout = &akita_oobinfo;
+ spitz_nand_pdata.ecc_layout = &akita_ooblayout_ops;
}
platform_device_register(&spitz_nand_device);
diff --git a/arch/cris/arch-v32/drivers/mach-a3/nandflash.c b/arch/cris/arch-v32/drivers/mach-a3/nandflash.c
index 5aa3f5162310..3f646c787e58 100644
--- a/arch/cris/arch-v32/drivers/mach-a3/nandflash.c
+++ b/arch/cris/arch-v32/drivers/mach-a3/nandflash.c
@@ -157,6 +157,7 @@ struct mtd_info *__init crisv32_nand_flash_probe(void)
/* 20 us command delay time */
this->chip_delay = 20;
this->ecc.mode = NAND_ECC_SOFT;
+ this->ecc.algo = NAND_ECC_HAMMING;
/* Enable the following for a flash based bad block table */
/* this->bbt_options = NAND_BBT_USE_FLASH; */
diff --git a/arch/cris/arch-v32/drivers/mach-fs/nandflash.c b/arch/cris/arch-v32/drivers/mach-fs/nandflash.c
index a7c17b0f172a..a74540514bdb 100644
--- a/arch/cris/arch-v32/drivers/mach-fs/nandflash.c
+++ b/arch/cris/arch-v32/drivers/mach-fs/nandflash.c
@@ -148,6 +148,7 @@ struct mtd_info *__init crisv32_nand_flash_probe(void)
/* 20 us command delay time */
this->chip_delay = 20;
this->ecc.mode = NAND_ECC_SOFT;
+ this->ecc.algo = NAND_ECC_HAMMING;
/* Enable the following for a flash based bad block table */
/* this->bbt_options = NAND_BBT_USE_FLASH; */
diff --git a/arch/mips/include/asm/mach-jz4740/jz4740_nand.h b/arch/mips/include/asm/mach-jz4740/jz4740_nand.h
index 398733e3e2cf..7f7b0fc554da 100644
--- a/arch/mips/include/asm/mach-jz4740/jz4740_nand.h
+++ b/arch/mips/include/asm/mach-jz4740/jz4740_nand.h
@@ -27,7 +27,7 @@ struct jz_nand_platform_data {
unsigned char banks[JZ_NAND_NUM_BANKS];
- void (*ident_callback)(struct platform_device *, struct nand_chip *,
+ void (*ident_callback)(struct platform_device *, struct mtd_info *,
struct mtd_partition **, int *num_partitions);
};
diff --git a/arch/mips/jz4740/board-qi_lb60.c b/arch/mips/jz4740/board-qi_lb60.c
index 4e3f9b7a02e4..258fd03c9ef5 100644
--- a/arch/mips/jz4740/board-qi_lb60.c
+++ b/arch/mips/jz4740/board-qi_lb60.c
@@ -48,20 +48,6 @@
#define QI_LB60_GPIO_KEYIN8 JZ_GPIO_PORTD(26)
/* NAND */
-static struct nand_ecclayout qi_lb60_ecclayout_1gb = {
- .eccbytes = 36,
- .eccpos = {
- 6, 7, 8, 9, 10, 11, 12, 13,
- 14, 15, 16, 17, 18, 19, 20, 21,
- 22, 23, 24, 25, 26, 27, 28, 29,
- 30, 31, 32, 33, 34, 35, 36, 37,
- 38, 39, 40, 41
- },
- .oobfree = {
- { .offset = 2, .length = 4 },
- { .offset = 42, .length = 22 }
- },
-};
/* Early prototypes of the QI LB60 had only 1GB of NAND.
* In order to support these devices as well the partition and ecc layout is
@@ -84,25 +70,6 @@ static struct mtd_partition qi_lb60_partitions_1gb[] = {
},
};
-static struct nand_ecclayout qi_lb60_ecclayout_2gb = {
- .eccbytes = 72,
- .eccpos = {
- 12, 13, 14, 15, 16, 17, 18, 19,
- 20, 21, 22, 23, 24, 25, 26, 27,
- 28, 29, 30, 31, 32, 33, 34, 35,
- 36, 37, 38, 39, 40, 41, 42, 43,
- 44, 45, 46, 47, 48, 49, 50, 51,
- 52, 53, 54, 55, 56, 57, 58, 59,
- 60, 61, 62, 63, 64, 65, 66, 67,
- 68, 69, 70, 71, 72, 73, 74, 75,
- 76, 77, 78, 79, 80, 81, 82, 83
- },
- .oobfree = {
- { .offset = 2, .length = 10 },
- { .offset = 84, .length = 44 },
- },
-};
-
static struct mtd_partition qi_lb60_partitions_2gb[] = {
{
.name = "NAND BOOT partition",
@@ -121,19 +88,67 @@ static struct mtd_partition qi_lb60_partitions_2gb[] = {
},
};
+static int qi_lb60_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section)
+ return -ERANGE;
+
+ oobregion->length = 36;
+ oobregion->offset = 6;
+
+ if (mtd->oobsize == 128) {
+ oobregion->length *= 2;
+ oobregion->offset *= 2;
+ }
+
+ return 0;
+}
+
+static int qi_lb60_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ int eccbytes = 36, eccoff = 6;
+
+ if (section > 1)
+ return -ERANGE;
+
+ if (mtd->oobsize == 128) {
+ eccbytes *= 2;
+ eccoff *= 2;
+ }
+
+ if (!section) {
+ oobregion->offset = 2;
+ oobregion->length = eccoff - 2;
+ } else {
+ oobregion->offset = eccoff + eccbytes;
+ oobregion->length = mtd->oobsize - oobregion->offset;
+ }
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops qi_lb60_ooblayout_ops = {
+ .ecc = qi_lb60_ooblayout_ecc,
+ .free = qi_lb60_ooblayout_free,
+};
+
static void qi_lb60_nand_ident(struct platform_device *pdev,
- struct nand_chip *chip, struct mtd_partition **partitions,
+ struct mtd_info *mtd, struct mtd_partition **partitions,
int *num_partitions)
{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+
if (chip->page_shift == 12) {
- chip->ecc.layout = &qi_lb60_ecclayout_2gb;
*partitions = qi_lb60_partitions_2gb;
*num_partitions = ARRAY_SIZE(qi_lb60_partitions_2gb);
} else {
- chip->ecc.layout = &qi_lb60_ecclayout_1gb;
*partitions = qi_lb60_partitions_1gb;
*num_partitions = ARRAY_SIZE(qi_lb60_partitions_1gb);
}
+
+ mtd_set_ooblayout(mtd, &qi_lb60_ooblayout_ops);
}
static struct jz_nand_platform_data qi_lb60_nand_pdata = {
diff --git a/drivers/bcma/driver_chipcommon_sflash.c b/drivers/bcma/driver_chipcommon_sflash.c
index 04d706ca5f43..35b13a08ca3e 100644
--- a/drivers/bcma/driver_chipcommon_sflash.c
+++ b/drivers/bcma/driver_chipcommon_sflash.c
@@ -146,7 +146,6 @@ int bcma_sflash_init(struct bcma_drv_cc *cc)
return -ENOTSUPP;
}
- sflash->window = BCMA_SOC_FLASH2;
sflash->blocksize = e->blocksize;
sflash->numblocks = e->numblocks;
sflash->size = sflash->blocksize * sflash->numblocks;
diff --git a/drivers/memory/Kconfig b/drivers/memory/Kconfig
index c61a284133e0..81ddb17575a9 100644
--- a/drivers/memory/Kconfig
+++ b/drivers/memory/Kconfig
@@ -51,6 +51,7 @@ config TI_EMIF
config OMAP_GPMC
bool
+ select GPIOLIB
help
This driver is for the General Purpose Memory Controller (GPMC)
present on Texas Instruments SoCs (e.g. OMAP2+). GPMC allows
diff --git a/drivers/memory/fsl_ifc.c b/drivers/memory/fsl_ifc.c
index 2a691da8c1c7..904b4af5f142 100644
--- a/drivers/memory/fsl_ifc.c
+++ b/drivers/memory/fsl_ifc.c
@@ -59,11 +59,11 @@ int fsl_ifc_find(phys_addr_t addr_base)
{
int i = 0;
- if (!fsl_ifc_ctrl_dev || !fsl_ifc_ctrl_dev->regs)
+ if (!fsl_ifc_ctrl_dev || !fsl_ifc_ctrl_dev->gregs)
return -ENODEV;
for (i = 0; i < fsl_ifc_ctrl_dev->banks; i++) {
- u32 cspr = ifc_in32(&fsl_ifc_ctrl_dev->regs->cspr_cs[i].cspr);
+ u32 cspr = ifc_in32(&fsl_ifc_ctrl_dev->gregs->cspr_cs[i].cspr);
if (cspr & CSPR_V && (cspr & CSPR_BA) ==
convert_ifc_address(addr_base))
return i;
@@ -75,7 +75,7 @@ EXPORT_SYMBOL(fsl_ifc_find);
static int fsl_ifc_ctrl_init(struct fsl_ifc_ctrl *ctrl)
{
- struct fsl_ifc_regs __iomem *ifc = ctrl->regs;
+ struct fsl_ifc_global __iomem *ifc = ctrl->gregs;
/*
* Clear all the common status and event registers
@@ -104,7 +104,7 @@ static int fsl_ifc_ctrl_remove(struct platform_device *dev)
irq_dispose_mapping(ctrl->nand_irq);
irq_dispose_mapping(ctrl->irq);
- iounmap(ctrl->regs);
+ iounmap(ctrl->gregs);
dev_set_drvdata(&dev->dev, NULL);
kfree(ctrl);
@@ -122,7 +122,7 @@ static DEFINE_SPINLOCK(nand_irq_lock);
static u32 check_nand_stat(struct fsl_ifc_ctrl *ctrl)
{
- struct fsl_ifc_regs __iomem *ifc = ctrl->regs;
+ struct fsl_ifc_runtime __iomem *ifc = ctrl->rregs;
unsigned long flags;
u32 stat;
@@ -157,7 +157,7 @@ static irqreturn_t fsl_ifc_nand_irq(int irqno, void *data)
static irqreturn_t fsl_ifc_ctrl_irq(int irqno, void *data)
{
struct fsl_ifc_ctrl *ctrl = data;
- struct fsl_ifc_regs __iomem *ifc = ctrl->regs;
+ struct fsl_ifc_global __iomem *ifc = ctrl->gregs;
u32 err_axiid, err_srcid, status, cs_err, err_addr;
irqreturn_t ret = IRQ_NONE;
@@ -215,6 +215,7 @@ static int fsl_ifc_ctrl_probe(struct platform_device *dev)
{
int ret = 0;
int version, banks;
+ void __iomem *addr;
dev_info(&dev->dev, "Freescale Integrated Flash Controller\n");
@@ -225,22 +226,13 @@ static int fsl_ifc_ctrl_probe(struct platform_device *dev)
dev_set_drvdata(&dev->dev, fsl_ifc_ctrl_dev);
/* IOMAP the entire IFC region */
- fsl_ifc_ctrl_dev->regs = of_iomap(dev->dev.of_node, 0);
- if (!fsl_ifc_ctrl_dev->regs) {
+ fsl_ifc_ctrl_dev->gregs = of_iomap(dev->dev.of_node, 0);
+ if (!fsl_ifc_ctrl_dev->gregs) {
dev_err(&dev->dev, "failed to get memory region\n");
ret = -ENODEV;
goto err;
}
- version = ifc_in32(&fsl_ifc_ctrl_dev->regs->ifc_rev) &
- FSL_IFC_VERSION_MASK;
- banks = (version == FSL_IFC_VERSION_1_0_0) ? 4 : 8;
- dev_info(&dev->dev, "IFC version %d.%d, %d banks\n",
- version >> 24, (version >> 16) & 0xf, banks);
-
- fsl_ifc_ctrl_dev->version = version;
- fsl_ifc_ctrl_dev->banks = banks;
-
if (of_property_read_bool(dev->dev.of_node, "little-endian")) {
fsl_ifc_ctrl_dev->little_endian = true;
dev_dbg(&dev->dev, "IFC REGISTERS are LITTLE endian\n");
@@ -249,8 +241,9 @@ static int fsl_ifc_ctrl_probe(struct platform_device *dev)
dev_dbg(&dev->dev, "IFC REGISTERS are BIG endian\n");
}
- version = ioread32be(&fsl_ifc_ctrl_dev->regs->ifc_rev) &
+ version = ifc_in32(&fsl_ifc_ctrl_dev->gregs->ifc_rev) &
FSL_IFC_VERSION_MASK;
+
banks = (version == FSL_IFC_VERSION_1_0_0) ? 4 : 8;
dev_info(&dev->dev, "IFC version %d.%d, %d banks\n",
version >> 24, (version >> 16) & 0xf, banks);
@@ -258,6 +251,13 @@ static int fsl_ifc_ctrl_probe(struct platform_device *dev)
fsl_ifc_ctrl_dev->version = version;
fsl_ifc_ctrl_dev->banks = banks;
+ addr = fsl_ifc_ctrl_dev->gregs;
+ if (version >= FSL_IFC_VERSION_2_0_0)
+ addr += PGOFFSET_64K;
+ else
+ addr += PGOFFSET_4K;
+ fsl_ifc_ctrl_dev->rregs = addr;
+
/* get the Controller level irq */
fsl_ifc_ctrl_dev->irq = irq_of_parse_and_map(dev->dev.of_node, 0);
if (fsl_ifc_ctrl_dev->irq == 0) {
diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c
index 21825ddce4a3..af4884ba6b7c 100644
--- a/drivers/memory/omap-gpmc.c
+++ b/drivers/memory/omap-gpmc.c
@@ -21,15 +21,15 @@
#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/module.h>
+#include <linux/gpio/driver.h>
#include <linux/interrupt.h>
+#include <linux/irqdomain.h>
#include <linux/platform_device.h>
#include <linux/of.h>
#include <linux/of_address.h>
-#include <linux/of_mtd.h>
#include <linux/of_device.h>
#include <linux/of_platform.h>
#include <linux/omap-gpmc.h>
-#include <linux/mtd/nand.h>
#include <linux/pm_runtime.h>
#include <linux/platform_data/mtd-nand-omap2.h>
@@ -81,6 +81,8 @@
#define GPMC_CONFIG_LIMITEDADDRESS BIT(1)
+#define GPMC_STATUS_EMPTYWRITEBUFFERSTATUS BIT(0)
+
#define GPMC_CONFIG2_CSEXTRADELAY BIT(7)
#define GPMC_CONFIG3_ADVEXTRADELAY BIT(7)
#define GPMC_CONFIG4_OEEXTRADELAY BIT(7)
@@ -92,6 +94,14 @@
#define GPMC_CS_SIZE 0x30
#define GPMC_BCH_SIZE 0x10
+/*
+ * The first 1MB of GPMC address space is typically mapped to
+ * the internal ROM. Never allocate the first page, to
+ * facilitate bug detection; even if we didn't boot from ROM.
+ * As GPMC minimum partition size is 16MB we can only start from
+ * there.
+ */
+#define GPMC_MEM_START 0x1000000
#define GPMC_MEM_END 0x3FFFFFFF
#define GPMC_CHUNK_SHIFT 24 /* 16 MB */
@@ -125,7 +135,6 @@
#define GPMC_CONFIG_RDY_BSY 0x00000001
#define GPMC_CONFIG_DEV_SIZE 0x00000002
#define GPMC_CONFIG_DEV_TYPE 0x00000003
-#define GPMC_SET_IRQ_STATUS 0x00000004
#define GPMC_CONFIG1_WRAPBURST_SUPP (1 << 31)
#define GPMC_CONFIG1_READMULTIPLE_SUPP (1 << 30)
@@ -174,16 +183,12 @@
#define GPMC_CONFIG_WRITEPROTECT 0x00000010
#define WR_RD_PIN_MONITORING 0x00600000
-#define GPMC_ENABLE_IRQ 0x0000000d
-
/* ECC commands */
#define GPMC_ECC_READ 0 /* Reset Hardware ECC for read */
#define GPMC_ECC_WRITE 1 /* Reset Hardware ECC for write */
#define GPMC_ECC_READSYN 2 /* Reset before syndrom is read back */
-/* XXX: Only NAND irq has been considered,currently these are the only ones used
- */
-#define GPMC_NR_IRQ 2
+#define GPMC_NR_NAND_IRQS 2 /* number of NAND specific IRQs */
enum gpmc_clk_domain {
GPMC_CD_FCLK,
@@ -199,11 +204,6 @@ struct gpmc_cs_data {
struct resource mem;
};
-struct gpmc_client_irq {
- unsigned irq;
- u32 bitmask;
-};
-
/* Structure to save gpmc cs context */
struct gpmc_cs_config {
u32 config1;
@@ -231,9 +231,15 @@ struct omap3_gpmc_regs {
struct gpmc_cs_config cs_context[GPMC_CS_NUM];
};
-static struct gpmc_client_irq gpmc_client_irq[GPMC_NR_IRQ];
-static struct irq_chip gpmc_irq_chip;
-static int gpmc_irq_start;
+struct gpmc_device {
+ struct device *dev;
+ int irq;
+ struct irq_chip irq_chip;
+ struct gpio_chip gpio_chip;
+ int nirqs;
+};
+
+static struct irq_domain *gpmc_irq_domain;
static struct resource gpmc_mem_root;
static struct gpmc_cs_data gpmc_cs[GPMC_CS_NUM];
@@ -241,8 +247,6 @@ static DEFINE_SPINLOCK(gpmc_mem_lock);
/* Define chip-selects as reserved by default until probe completes */
static unsigned int gpmc_cs_num = GPMC_CS_NUM;
static unsigned int gpmc_nr_waitpins;
-static struct device *gpmc_dev;
-static int gpmc_irq;
static resource_size_t phys_base, mem_size;
static unsigned gpmc_capability;
static void __iomem *gpmc_base;
@@ -1054,14 +1058,6 @@ int gpmc_configure(int cmd, int wval)
u32 regval;
switch (cmd) {
- case GPMC_ENABLE_IRQ:
- gpmc_write_reg(GPMC_IRQENABLE, wval);
- break;
-
- case GPMC_SET_IRQ_STATUS:
- gpmc_write_reg(GPMC_IRQSTATUS, wval);
- break;
-
case GPMC_CONFIG_WP:
regval = gpmc_read_reg(GPMC_CONFIG);
if (wval)
@@ -1084,7 +1080,7 @@ void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs)
{
int i;
- reg->gpmc_status = gpmc_base + GPMC_STATUS;
+ reg->gpmc_status = NULL; /* deprecated */
reg->gpmc_nand_command = gpmc_base + GPMC_CS0_OFFSET +
GPMC_CS_NAND_COMMAND + GPMC_CS_SIZE * cs;
reg->gpmc_nand_address = gpmc_base + GPMC_CS0_OFFSET +
@@ -1118,87 +1114,201 @@ void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs)
}
}
-int gpmc_get_client_irq(unsigned irq_config)
+static bool gpmc_nand_writebuffer_empty(void)
{
- int i;
+ if (gpmc_read_reg(GPMC_STATUS) & GPMC_STATUS_EMPTYWRITEBUFFERSTATUS)
+ return true;
- if (hweight32(irq_config) > 1)
+ return false;
+}
+
+static struct gpmc_nand_ops nand_ops = {
+ .nand_writebuffer_empty = gpmc_nand_writebuffer_empty,
+};
+
+/**
+ * gpmc_omap_get_nand_ops - Get the GPMC NAND interface
+ * @regs: the GPMC NAND register map exclusive for NAND use.
+ * @cs: GPMC chip select number on which the NAND sits. The
+ * register map returned will be specific to this chip select.
+ *
+ * Returns NULL on error e.g. invalid cs.
+ */
+struct gpmc_nand_ops *gpmc_omap_get_nand_ops(struct gpmc_nand_regs *reg, int cs)
+{
+ if (cs >= gpmc_cs_num)
+ return NULL;
+
+ gpmc_update_nand_reg(reg, cs);
+
+ return &nand_ops;
+}
+EXPORT_SYMBOL_GPL(gpmc_omap_get_nand_ops);
+
+int gpmc_get_client_irq(unsigned irq_config)
+{
+ if (!gpmc_irq_domain) {
+ pr_warn("%s called before GPMC IRQ domain available\n",
+ __func__);
return 0;
+ }
- for (i = 0; i < GPMC_NR_IRQ; i++)
- if (gpmc_client_irq[i].bitmask & irq_config)
- return gpmc_client_irq[i].irq;
+ /* we restrict this to NAND IRQs only */
+ if (irq_config >= GPMC_NR_NAND_IRQS)
+ return 0;
- return 0;
+ return irq_create_mapping(gpmc_irq_domain, irq_config);
}
-static int gpmc_irq_endis(unsigned irq, bool endis)
+static int gpmc_irq_endis(unsigned long hwirq, bool endis)
{
- int i;
u32 regval;
- for (i = 0; i < GPMC_NR_IRQ; i++)
- if (irq == gpmc_client_irq[i].irq) {
- regval = gpmc_read_reg(GPMC_IRQENABLE);
- if (endis)
- regval |= gpmc_client_irq[i].bitmask;
- else
- regval &= ~gpmc_client_irq[i].bitmask;
- gpmc_write_reg(GPMC_IRQENABLE, regval);
- break;
- }
+ /* bits GPMC_NR_NAND_IRQS to 8 are reserved */
+ if (hwirq >= GPMC_NR_NAND_IRQS)
+ hwirq += 8 - GPMC_NR_NAND_IRQS;
+
+ regval = gpmc_read_reg(GPMC_IRQENABLE);
+ if (endis)
+ regval |= BIT(hwirq);
+ else
+ regval &= ~BIT(hwirq);
+ gpmc_write_reg(GPMC_IRQENABLE, regval);
return 0;
}
static void gpmc_irq_disable(struct irq_data *p)
{
- gpmc_irq_endis(p->irq, false);
+ gpmc_irq_endis(p->hwirq, false);
}
static void gpmc_irq_enable(struct irq_data *p)
{
- gpmc_irq_endis(p->irq, true);
+ gpmc_irq_endis(p->hwirq, true);
}
-static void gpmc_irq_noop(struct irq_data *data) { }
+static void gpmc_irq_mask(struct irq_data *d)
+{
+ gpmc_irq_endis(d->hwirq, false);
+}
-static unsigned int gpmc_irq_noop_ret(struct irq_data *data) { return 0; }
+static void gpmc_irq_unmask(struct irq_data *d)
+{
+ gpmc_irq_endis(d->hwirq, true);
+}
-static int gpmc_setup_irq(void)
+static void gpmc_irq_edge_config(unsigned long hwirq, bool rising_edge)
{
- int i;
u32 regval;
- if (!gpmc_irq)
+ /* NAND IRQs polarity is not configurable */
+ if (hwirq < GPMC_NR_NAND_IRQS)
+ return;
+
+ /* WAITPIN starts at BIT 8 */
+ hwirq += 8 - GPMC_NR_NAND_IRQS;
+
+ regval = gpmc_read_reg(GPMC_CONFIG);
+ if (rising_edge)
+ regval &= ~BIT(hwirq);
+ else
+ regval |= BIT(hwirq);
+
+ gpmc_write_reg(GPMC_CONFIG, regval);
+}
+
+static void gpmc_irq_ack(struct irq_data *d)
+{
+ unsigned int hwirq = d->hwirq;
+
+ /* skip reserved bits */
+ if (hwirq >= GPMC_NR_NAND_IRQS)
+ hwirq += 8 - GPMC_NR_NAND_IRQS;
+
+ /* Setting bit to 1 clears (or Acks) the interrupt */
+ gpmc_write_reg(GPMC_IRQSTATUS, BIT(hwirq));
+}
+
+static int gpmc_irq_set_type(struct irq_data *d, unsigned int trigger)
+{
+ /* can't set type for NAND IRQs */
+ if (d->hwirq < GPMC_NR_NAND_IRQS)
return -EINVAL;
- gpmc_irq_start = irq_alloc_descs(-1, 0, GPMC_NR_IRQ, 0);
- if (gpmc_irq_start < 0) {
- pr_err("irq_alloc_descs failed\n");
- return gpmc_irq_start;
+ /* We can support either rising or falling edge at a time */
+ if (trigger == IRQ_TYPE_EDGE_FALLING)
+ gpmc_irq_edge_config(d->hwirq, false);
+ else if (trigger == IRQ_TYPE_EDGE_RISING)
+ gpmc_irq_edge_config(d->hwirq, true);
+ else
+ return -EINVAL;
+
+ return 0;
+}
+
+static int gpmc_irq_map(struct irq_domain *d, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ struct gpmc_device *gpmc = d->host_data;
+
+ irq_set_chip_data(virq, gpmc);
+ if (hw < GPMC_NR_NAND_IRQS) {
+ irq_modify_status(virq, IRQ_NOREQUEST, IRQ_NOAUTOEN);
+ irq_set_chip_and_handler(virq, &gpmc->irq_chip,
+ handle_simple_irq);
+ } else {
+ irq_set_chip_and_handler(virq, &gpmc->irq_chip,
+ handle_edge_irq);
}
- gpmc_irq_chip.name = "gpmc";
- gpmc_irq_chip.irq_startup = gpmc_irq_noop_ret;
- gpmc_irq_chip.irq_enable = gpmc_irq_enable;
- gpmc_irq_chip.irq_disable = gpmc_irq_disable;
- gpmc_irq_chip.irq_shutdown = gpmc_irq_noop;
- gpmc_irq_chip.irq_ack = gpmc_irq_noop;
- gpmc_irq_chip.irq_mask = gpmc_irq_noop;
- gpmc_irq_chip.irq_unmask = gpmc_irq_noop;
-
- gpmc_client_irq[0].bitmask = GPMC_IRQ_FIFOEVENTENABLE;
- gpmc_client_irq[1].bitmask = GPMC_IRQ_COUNT_EVENT;
-
- for (i = 0; i < GPMC_NR_IRQ; i++) {
- gpmc_client_irq[i].irq = gpmc_irq_start + i;
- irq_set_chip_and_handler(gpmc_client_irq[i].irq,
- &gpmc_irq_chip, handle_simple_irq);
- irq_modify_status(gpmc_client_irq[i].irq, IRQ_NOREQUEST,
- IRQ_NOAUTOEN);
+ return 0;
+}
+
+static const struct irq_domain_ops gpmc_irq_domain_ops = {
+ .map = gpmc_irq_map,
+ .xlate = irq_domain_xlate_twocell,
+};
+
+static irqreturn_t gpmc_handle_irq(int irq, void *data)
+{
+ int hwirq, virq;
+ u32 regval, regvalx;
+ struct gpmc_device *gpmc = data;
+
+ regval = gpmc_read_reg(GPMC_IRQSTATUS);
+ regvalx = regval;
+
+ if (!regval)
+ return IRQ_NONE;
+
+ for (hwirq = 0; hwirq < gpmc->nirqs; hwirq++) {
+ /* skip reserved status bits */
+ if (hwirq == GPMC_NR_NAND_IRQS)
+ regvalx >>= 8 - GPMC_NR_NAND_IRQS;
+
+ if (regvalx & BIT(hwirq)) {
+ virq = irq_find_mapping(gpmc_irq_domain, hwirq);
+ if (!virq) {
+ dev_warn(gpmc->dev,
+ "spurious irq detected hwirq %d, virq %d\n",
+ hwirq, virq);
+ }
+
+ generic_handle_irq(virq);
+ }
}
+ gpmc_write_reg(GPMC_IRQSTATUS, regval);
+
+ return IRQ_HANDLED;
+}
+
+static int gpmc_setup_irq(struct gpmc_device *gpmc)
+{
+ u32 regval;
+ int rc;
+
/* Disable interrupts */
gpmc_write_reg(GPMC_IRQENABLE, 0);
@@ -1206,22 +1316,45 @@ static int gpmc_setup_irq(void)
regval = gpmc_read_reg(GPMC_IRQSTATUS);
gpmc_write_reg(GPMC_IRQSTATUS, regval);
- return request_irq(gpmc_irq, gpmc_handle_irq, 0, "gpmc", NULL);
+ gpmc->irq_chip.name = "gpmc";
+ gpmc->irq_chip.irq_enable = gpmc_irq_enable;
+ gpmc->irq_chip.irq_disable = gpmc_irq_disable;
+ gpmc->irq_chip.irq_ack = gpmc_irq_ack;
+ gpmc->irq_chip.irq_mask = gpmc_irq_mask;
+ gpmc->irq_chip.irq_unmask = gpmc_irq_unmask;
+ gpmc->irq_chip.irq_set_type = gpmc_irq_set_type;
+
+ gpmc_irq_domain = irq_domain_add_linear(gpmc->dev->of_node,
+ gpmc->nirqs,
+ &gpmc_irq_domain_ops,
+ gpmc);
+ if (!gpmc_irq_domain) {
+ dev_err(gpmc->dev, "IRQ domain add failed\n");
+ return -ENODEV;
+ }
+
+ rc = request_irq(gpmc->irq, gpmc_handle_irq, 0, "gpmc", gpmc);
+ if (rc) {
+ dev_err(gpmc->dev, "failed to request irq %d: %d\n",
+ gpmc->irq, rc);
+ irq_domain_remove(gpmc_irq_domain);
+ gpmc_irq_domain = NULL;
+ }
+
+ return rc;
}
-static int gpmc_free_irq(void)
+static int gpmc_free_irq(struct gpmc_device *gpmc)
{
- int i;
+ int hwirq;
- if (gpmc_irq)
- free_irq(gpmc_irq, NULL);
+ free_irq(gpmc->irq, gpmc);
- for (i = 0; i < GPMC_NR_IRQ; i++) {
- irq_set_handler(gpmc_client_irq[i].irq, NULL);
- irq_set_chip(gpmc_client_irq[i].irq, &no_irq_chip);
- }
+ for (hwirq = 0; hwirq < gpmc->nirqs; hwirq++)
+ irq_dispose_mapping(irq_find_mapping(gpmc_irq_domain, hwirq));
- irq_free_descs(gpmc_irq_start, GPMC_NR_IRQ);
+ irq_domain_remove(gpmc_irq_domain);
+ gpmc_irq_domain = NULL;
return 0;
}
@@ -1242,12 +1375,7 @@ static void gpmc_mem_init(void)
{
int cs;
- /*
- * The first 1MB of GPMC address space is typically mapped to
- * the internal ROM. Never allocate the first page, to
- * facilitate bug detection; even if we didn't boot from ROM.
- */
- gpmc_mem_root.start = SZ_1M;
+ gpmc_mem_root.start = GPMC_MEM_START;
gpmc_mem_root.end = GPMC_MEM_END;
/* Reserve all regions that has been set up by bootloader */
@@ -1796,105 +1924,6 @@ static void __maybe_unused gpmc_read_timings_dt(struct device_node *np,
of_property_read_bool(np, "gpmc,time-para-granularity");
}
-#if IS_ENABLED(CONFIG_MTD_NAND)
-
-static const char * const nand_xfer_types[] = {
- [NAND_OMAP_PREFETCH_POLLED] = "prefetch-polled",
- [NAND_OMAP_POLLED] = "polled",
- [NAND_OMAP_PREFETCH_DMA] = "prefetch-dma",
- [NAND_OMAP_PREFETCH_IRQ] = "prefetch-irq",
-};
-
-static int gpmc_probe_nand_child(struct platform_device *pdev,
- struct device_node *child)
-{
- u32 val;
- const char *s;
- struct gpmc_timings gpmc_t;
- struct omap_nand_platform_data *gpmc_nand_data;
-
- if (of_property_read_u32(child, "reg", &val) < 0) {
- dev_err(&pdev->dev, "%s has no 'reg' property\n",
- child->full_name);
- return -ENODEV;
- }
-
- gpmc_nand_data = devm_kzalloc(&pdev->dev, sizeof(*gpmc_nand_data),
- GFP_KERNEL);
- if (!gpmc_nand_data)
- return -ENOMEM;
-
- gpmc_nand_data->cs = val;
- gpmc_nand_data->of_node = child;
-
- /* Detect availability of ELM module */
- gpmc_nand_data->elm_of_node = of_parse_phandle(child, "ti,elm-id", 0);
- if (gpmc_nand_data->elm_of_node == NULL)
- gpmc_nand_data->elm_of_node =
- of_parse_phandle(child, "elm_id", 0);
-
- /* select ecc-scheme for NAND */
- if (of_property_read_string(child, "ti,nand-ecc-opt", &s)) {
- pr_err("%s: ti,nand-ecc-opt not found\n", __func__);
- return -ENODEV;
- }
-
- if (!strcmp(s, "sw"))
- gpmc_nand_data->ecc_opt = OMAP_ECC_HAM1_CODE_SW;
- else if (!strcmp(s, "ham1") ||
- !strcmp(s, "hw") || !strcmp(s, "hw-romcode"))
- gpmc_nand_data->ecc_opt =
- OMAP_ECC_HAM1_CODE_HW;
- else if (!strcmp(s, "bch4"))
- if (gpmc_nand_data->elm_of_node)
- gpmc_nand_data->ecc_opt =
- OMAP_ECC_BCH4_CODE_HW;
- else
- gpmc_nand_data->ecc_opt =
- OMAP_ECC_BCH4_CODE_HW_DETECTION_SW;
- else if (!strcmp(s, "bch8"))
- if (gpmc_nand_data->elm_of_node)
- gpmc_nand_data->ecc_opt =
- OMAP_ECC_BCH8_CODE_HW;
- else
- gpmc_nand_data->ecc_opt =
- OMAP_ECC_BCH8_CODE_HW_DETECTION_SW;
- else if (!strcmp(s, "bch16"))
- if (gpmc_nand_data->elm_of_node)
- gpmc_nand_data->ecc_opt =
- OMAP_ECC_BCH16_CODE_HW;
- else
- pr_err("%s: BCH16 requires ELM support\n", __func__);
- else
- pr_err("%s: ti,nand-ecc-opt invalid value\n", __func__);
-
- /* select data transfer mode for NAND controller */
- if (!of_property_read_string(child, "ti,nand-xfer-type", &s))
- for (val = 0; val < ARRAY_SIZE(nand_xfer_types); val++)
- if (!strcasecmp(s, nand_xfer_types[val])) {
- gpmc_nand_data->xfer_type = val;
- break;
- }
-
- gpmc_nand_data->flash_bbt = of_get_nand_on_flash_bbt(child);
-
- val = of_get_nand_bus_width(child);
- if (val == 16)
- gpmc_nand_data->devsize = NAND_BUSWIDTH_16;
-
- gpmc_read_timings_dt(child, &gpmc_t);
- gpmc_nand_init(gpmc_nand_data, &gpmc_t);
-
- return 0;
-}
-#else
-static int gpmc_probe_nand_child(struct platform_device *pdev,
- struct device_node *child)
-{
- return 0;
-}
-#endif
-
#if IS_ENABLED(CONFIG_MTD_ONENAND)
static int gpmc_probe_onenand_child(struct platform_device *pdev,
struct device_node *child)
@@ -1950,6 +1979,8 @@ static int gpmc_probe_generic_child(struct platform_device *pdev,
const char *name;
int ret, cs;
u32 val;
+ struct gpio_desc *waitpin_desc = NULL;
+ struct gpmc_device *gpmc = platform_get_drvdata(pdev);
if (of_property_read_u32(child, "reg", &cs) < 0) {
dev_err(&pdev->dev, "%s has no 'reg' property\n",
@@ -2010,23 +2041,80 @@ static int gpmc_probe_generic_child(struct platform_device *pdev,
if (ret < 0) {
dev_err(&pdev->dev, "cannot remap GPMC CS %d to %pa\n",
cs, &res.start);
+ if (res.start < GPMC_MEM_START) {
+ dev_info(&pdev->dev,
+ "GPMC CS %d start cannot be lesser than 0x%x\n",
+ cs, GPMC_MEM_START);
+ } else if (res.end > GPMC_MEM_END) {
+ dev_info(&pdev->dev,
+ "GPMC CS %d end cannot be greater than 0x%x\n",
+ cs, GPMC_MEM_END);
+ }
goto err;
}
- ret = of_property_read_u32(child, "bank-width", &gpmc_s.device_width);
- if (ret < 0)
- goto err;
+ if (of_node_cmp(child->name, "nand") == 0) {
+ /* Warn about older DT blobs with no compatible property */
+ if (!of_property_read_bool(child, "compatible")) {
+ dev_warn(&pdev->dev,
+ "Incompatible NAND node: missing compatible");
+ ret = -EINVAL;
+ goto err;
+ }
+ }
+
+ if (of_device_is_compatible(child, "ti,omap2-nand")) {
+ /* NAND specific setup */
+ val = 8;
+ of_property_read_u32(child, "nand-bus-width", &val);
+ switch (val) {
+ case 8:
+ gpmc_s.device_width = GPMC_DEVWIDTH_8BIT;
+ break;
+ case 16:
+ gpmc_s.device_width = GPMC_DEVWIDTH_16BIT;
+ break;
+ default:
+ dev_err(&pdev->dev, "%s: invalid 'nand-bus-width'\n",
+ child->name);
+ ret = -EINVAL;
+ goto err;
+ }
+
+ /* disable write protect */
+ gpmc_configure(GPMC_CONFIG_WP, 0);
+ gpmc_s.device_nand = true;
+ } else {
+ ret = of_property_read_u32(child, "bank-width",
+ &gpmc_s.device_width);
+ if (ret < 0)
+ goto err;
+ }
+
+ /* Reserve wait pin if it is required and valid */
+ if (gpmc_s.wait_on_read || gpmc_s.wait_on_write) {
+ unsigned int wait_pin = gpmc_s.wait_pin;
+
+ waitpin_desc = gpiochip_request_own_desc(&gpmc->gpio_chip,
+ wait_pin, "WAITPIN");
+ if (IS_ERR(waitpin_desc)) {
+ dev_err(&pdev->dev, "invalid wait-pin: %d\n", wait_pin);
+ ret = PTR_ERR(waitpin_desc);
+ goto err;
+ }
+ }
gpmc_cs_show_timings(cs, "before gpmc_cs_program_settings");
+
ret = gpmc_cs_program_settings(cs, &gpmc_s);
if (ret < 0)
- goto err;
+ goto err_cs;
ret = gpmc_cs_set_timings(cs, &gpmc_t, &gpmc_s);
if (ret) {
dev_err(&pdev->dev, "failed to set gpmc timings for: %s\n",
child->name);
- goto err;
+ goto err_cs;
}
/* Clear limited address i.e. enable A26-A11 */
@@ -2057,16 +2145,81 @@ err_child_fail:
dev_err(&pdev->dev, "failed to create gpmc child %s\n", child->name);
ret = -ENODEV;
+err_cs:
+ if (waitpin_desc)
+ gpiochip_free_own_desc(waitpin_desc);
+
err:
gpmc_cs_free(cs);
return ret;
}
+static int gpmc_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)
+{
+ return 1; /* we're input only */
+}
+
+static int gpmc_gpio_direction_input(struct gpio_chip *chip,
+ unsigned int offset)
+{
+ return 0; /* we're input only */
+}
+
+static int gpmc_gpio_direction_output(struct gpio_chip *chip,
+ unsigned int offset, int value)
+{
+ return -EINVAL; /* we're input only */
+}
+
+static void gpmc_gpio_set(struct gpio_chip *chip, unsigned int offset,
+ int value)
+{
+}
+
+static int gpmc_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+ u32 reg;
+
+ offset += 8;
+
+ reg = gpmc_read_reg(GPMC_STATUS) & BIT(offset);
+
+ return !!reg;
+}
+
+static int gpmc_gpio_init(struct gpmc_device *gpmc)
+{
+ int ret;
+
+ gpmc->gpio_chip.parent = gpmc->dev;
+ gpmc->gpio_chip.owner = THIS_MODULE;
+ gpmc->gpio_chip.label = DEVICE_NAME;
+ gpmc->gpio_chip.ngpio = gpmc_nr_waitpins;
+ gpmc->gpio_chip.get_direction = gpmc_gpio_get_direction;
+ gpmc->gpio_chip.direction_input = gpmc_gpio_direction_input;
+ gpmc->gpio_chip.direction_output = gpmc_gpio_direction_output;
+ gpmc->gpio_chip.set = gpmc_gpio_set;
+ gpmc->gpio_chip.get = gpmc_gpio_get;
+ gpmc->gpio_chip.base = -1;
+
+ ret = gpiochip_add(&gpmc->gpio_chip);
+ if (ret < 0) {
+ dev_err(gpmc->dev, "could not register gpio chip: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static void gpmc_gpio_exit(struct gpmc_device *gpmc)
+{
+ gpiochip_remove(&gpmc->gpio_chip);
+}
+
static int gpmc_probe_dt(struct platform_device *pdev)
{
int ret;
- struct device_node *child;
const struct of_device_id *of_id =
of_match_device(gpmc_dt_ids, &pdev->dev);
@@ -2094,17 +2247,26 @@ static int gpmc_probe_dt(struct platform_device *pdev)
return ret;
}
+ return 0;
+}
+
+static int gpmc_probe_dt_children(struct platform_device *pdev)
+{
+ int ret;
+ struct device_node *child;
+
for_each_available_child_of_node(pdev->dev.of_node, child) {
if (!child->name)
continue;
- if (of_node_cmp(child->name, "nand") == 0)
- ret = gpmc_probe_nand_child(pdev, child);
- else if (of_node_cmp(child->name, "onenand") == 0)
+ if (of_node_cmp(child->name, "onenand") == 0)
ret = gpmc_probe_onenand_child(pdev, child);
else
ret = gpmc_probe_generic_child(pdev, child);
+
+ if (ret)
+ return ret;
}
return 0;
@@ -2114,6 +2276,11 @@ static int gpmc_probe_dt(struct platform_device *pdev)
{
return 0;
}
+
+static int gpmc_probe_dt_children(struct platform_device *pdev)
+{
+ return 0;
+}
#endif
static int gpmc_probe(struct platform_device *pdev)
@@ -2121,6 +2288,14 @@ static int gpmc_probe(struct platform_device *pdev)
int rc;
u32 l;
struct resource *res;
+ struct gpmc_device *gpmc;
+
+ gpmc = devm_kzalloc(&pdev->dev, sizeof(*gpmc), GFP_KERNEL);
+ if (!gpmc)
+ return -ENOMEM;
+
+ gpmc->dev = &pdev->dev;
+ platform_set_drvdata(pdev, gpmc);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (res == NULL)
@@ -2134,15 +2309,16 @@ static int gpmc_probe(struct platform_device *pdev)
return PTR_ERR(gpmc_base);
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (res == NULL)
- dev_warn(&pdev->dev, "Failed to get resource: irq\n");
- else
- gpmc_irq = res->start;
+ if (!res) {
+ dev_err(&pdev->dev, "Failed to get resource: irq\n");
+ return -ENOENT;
+ }
+
+ gpmc->irq = res->start;
gpmc_l3_clk = devm_clk_get(&pdev->dev, "fck");
if (IS_ERR(gpmc_l3_clk)) {
dev_err(&pdev->dev, "Failed to get GPMC fck\n");
- gpmc_irq = 0;
return PTR_ERR(gpmc_l3_clk);
}
@@ -2151,11 +2327,18 @@ static int gpmc_probe(struct platform_device *pdev)
return -EINVAL;
}
+ if (pdev->dev.of_node) {
+ rc = gpmc_probe_dt(pdev);
+ if (rc)
+ return rc;
+ } else {
+ gpmc_cs_num = GPMC_CS_NUM;
+ gpmc_nr_waitpins = GPMC_NR_WAITPINS;
+ }
+
pm_runtime_enable(&pdev->dev);
pm_runtime_get_sync(&pdev->dev);
- gpmc_dev = &pdev->dev;
-
l = gpmc_read_reg(GPMC_REVISION);
/*
@@ -2174,36 +2357,51 @@ static int gpmc_probe(struct platform_device *pdev)
gpmc_capability = GPMC_HAS_WR_ACCESS | GPMC_HAS_WR_DATA_MUX_BUS;
if (GPMC_REVISION_MAJOR(l) > 0x5)
gpmc_capability |= GPMC_HAS_MUX_AAD;
- dev_info(gpmc_dev, "GPMC revision %d.%d\n", GPMC_REVISION_MAJOR(l),
+ dev_info(gpmc->dev, "GPMC revision %d.%d\n", GPMC_REVISION_MAJOR(l),
GPMC_REVISION_MINOR(l));
gpmc_mem_init();
-
- if (gpmc_setup_irq() < 0)
- dev_warn(gpmc_dev, "gpmc_setup_irq failed\n");
-
- if (!pdev->dev.of_node) {
- gpmc_cs_num = GPMC_CS_NUM;
- gpmc_nr_waitpins = GPMC_NR_WAITPINS;
+ rc = gpmc_gpio_init(gpmc);
+ if (rc)
+ goto gpio_init_failed;
+
+ gpmc->nirqs = GPMC_NR_NAND_IRQS + gpmc_nr_waitpins;
+ rc = gpmc_setup_irq(gpmc);
+ if (rc) {
+ dev_err(gpmc->dev, "gpmc_setup_irq failed\n");
+ goto setup_irq_failed;
}
- rc = gpmc_probe_dt(pdev);
+ rc = gpmc_probe_dt_children(pdev);
if (rc < 0) {
- pm_runtime_put_sync(&pdev->dev);
- dev_err(gpmc_dev, "failed to probe DT parameters\n");
- return rc;
+ dev_err(gpmc->dev, "failed to probe DT children\n");
+ goto dt_children_failed;
}
return 0;
+
+dt_children_failed:
+ gpmc_free_irq(gpmc);
+setup_irq_failed:
+ gpmc_gpio_exit(gpmc);
+gpio_init_failed:
+ gpmc_mem_exit();
+ pm_runtime_put_sync(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+
+ return rc;
}
static int gpmc_remove(struct platform_device *pdev)
{
- gpmc_free_irq();
+ struct gpmc_device *gpmc = platform_get_drvdata(pdev);
+
+ gpmc_free_irq(gpmc);
+ gpmc_gpio_exit(gpmc);
gpmc_mem_exit();
pm_runtime_put_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
- gpmc_dev = NULL;
+
return 0;
}
@@ -2249,25 +2447,6 @@ static __exit void gpmc_exit(void)
postcore_initcall(gpmc_init);
module_exit(gpmc_exit);
-static irqreturn_t gpmc_handle_irq(int irq, void *dev)
-{
- int i;
- u32 regval;
-
- regval = gpmc_read_reg(GPMC_IRQSTATUS);
-
- if (!regval)
- return IRQ_NONE;
-
- for (i = 0; i < GPMC_NR_IRQ; i++)
- if (regval & gpmc_client_irq[i].bitmask)
- generic_handle_irq(gpmc_client_irq[i].irq);
-
- gpmc_write_reg(GPMC_IRQSTATUS, regval);
-
- return IRQ_HANDLED;
-}
-
static struct omap3_gpmc_regs gpmc_context;
void omap3_gpmc_save_context(void)
diff --git a/drivers/mtd/chips/Kconfig b/drivers/mtd/chips/Kconfig
index 3b3dabce58de..bbfa1f129266 100644
--- a/drivers/mtd/chips/Kconfig
+++ b/drivers/mtd/chips/Kconfig
@@ -115,6 +115,7 @@ config MTD_MAP_BANK_WIDTH_16
config MTD_MAP_BANK_WIDTH_32
bool "Support 256-bit buswidth" if MTD_CFI_GEOMETRY
+ select MTD_COMPLEX_MAPPINGS if HAS_IOMEM
default n
help
If you wish to support CFI devices on a physical bus which is
diff --git a/drivers/mtd/devices/bcm47xxsflash.c b/drivers/mtd/devices/bcm47xxsflash.c
index 347bb83db864..1c65c15b31a1 100644
--- a/drivers/mtd/devices/bcm47xxsflash.c
+++ b/drivers/mtd/devices/bcm47xxsflash.c
@@ -2,6 +2,7 @@
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/delay.h>
+#include <linux/ioport.h>
#include <linux/mtd/mtd.h>
#include <linux/platform_device.h>
#include <linux/bcma/bcma.h>
@@ -109,8 +110,7 @@ static int bcm47xxsflash_read(struct mtd_info *mtd, loff_t from, size_t len,
if ((from + len) > mtd->size)
return -EINVAL;
- memcpy_fromio(buf, (void __iomem *)KSEG0ADDR(b47s->window + from),
- len);
+ memcpy_fromio(buf, b47s->window + from, len);
*retlen = len;
return len;
@@ -275,15 +275,33 @@ static void bcm47xxsflash_bcma_cc_write(struct bcm47xxsflash *b47s, u16 offset,
static int bcm47xxsflash_bcma_probe(struct platform_device *pdev)
{
- struct bcma_sflash *sflash = dev_get_platdata(&pdev->dev);
+ struct device *dev = &pdev->dev;
+ struct bcma_sflash *sflash = dev_get_platdata(dev);
struct bcm47xxsflash *b47s;
+ struct resource *res;
int err;
- b47s = devm_kzalloc(&pdev->dev, sizeof(*b47s), GFP_KERNEL);
+ b47s = devm_kzalloc(dev, sizeof(*b47s), GFP_KERNEL);
if (!b47s)
return -ENOMEM;
sflash->priv = b47s;
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(dev, "invalid resource\n");
+ return -EINVAL;
+ }
+ if (!devm_request_mem_region(dev, res->start, resource_size(res),
+ res->name)) {
+ dev_err(dev, "can't request region for resource %pR\n", res);
+ return -EBUSY;
+ }
+ b47s->window = ioremap_cache(res->start, resource_size(res));
+ if (!b47s->window) {
+ dev_err(dev, "ioremap failed for resource %pR\n", res);
+ return -ENOMEM;
+ }
+
b47s->bcma_cc = container_of(sflash, struct bcma_drv_cc, sflash);
b47s->cc_read = bcm47xxsflash_bcma_cc_read;
b47s->cc_write = bcm47xxsflash_bcma_cc_write;
@@ -297,7 +315,6 @@ static int bcm47xxsflash_bcma_probe(struct platform_device *pdev)
break;
}
- b47s->window = sflash->window;
b47s->blocksize = sflash->blocksize;
b47s->numblocks = sflash->numblocks;
b47s->size = sflash->size;
@@ -306,6 +323,7 @@ static int bcm47xxsflash_bcma_probe(struct platform_device *pdev)
err = mtd_device_parse_register(&b47s->mtd, probes, NULL, NULL, 0);
if (err) {
pr_err("Failed to register MTD device: %d\n", err);
+ iounmap(b47s->window);
return err;
}
@@ -321,6 +339,7 @@ static int bcm47xxsflash_bcma_remove(struct platform_device *pdev)
struct bcm47xxsflash *b47s = sflash->priv;
mtd_device_unregister(&b47s->mtd);
+ iounmap(b47s->window);
return 0;
}
diff --git a/drivers/mtd/devices/bcm47xxsflash.h b/drivers/mtd/devices/bcm47xxsflash.h
index fe93daf4f489..1564b62b412e 100644
--- a/drivers/mtd/devices/bcm47xxsflash.h
+++ b/drivers/mtd/devices/bcm47xxsflash.h
@@ -65,7 +65,8 @@ struct bcm47xxsflash {
enum bcm47xxsflash_type type;
- u32 window;
+ void __iomem *window;
+
u32 blocksize;
u16 numblocks;
u32 size;
diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c
index e7b2e439696c..b833e6cc684c 100644
--- a/drivers/mtd/devices/docg3.c
+++ b/drivers/mtd/devices/docg3.c
@@ -67,16 +67,40 @@ module_param(reliable_mode, uint, 0);
MODULE_PARM_DESC(reliable_mode, "Set the docg3 mode (0=normal MLC, 1=fast, "
"2=reliable) : MLC normal operations are in normal mode");
-/**
- * struct docg3_oobinfo - DiskOnChip G3 OOB layout
- * @eccbytes: 8 bytes are used (1 for Hamming ECC, 7 for BCH ECC)
- * @eccpos: ecc positions (byte 7 is Hamming ECC, byte 8-14 are BCH ECC)
- * @oobfree: free pageinfo bytes (byte 0 until byte 6, byte 15
- */
-static struct nand_ecclayout docg3_oobinfo = {
- .eccbytes = 8,
- .eccpos = {7, 8, 9, 10, 11, 12, 13, 14},
- .oobfree = {{0, 7}, {15, 1} },
+static int docg3_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section)
+ return -ERANGE;
+
+ /* byte 7 is Hamming ECC, byte 8-14 are BCH ECC */
+ oobregion->offset = 7;
+ oobregion->length = 8;
+
+ return 0;
+}
+
+static int docg3_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section > 1)
+ return -ERANGE;
+
+ /* free bytes: byte 0 until byte 6, byte 15 */
+ if (!section) {
+ oobregion->offset = 0;
+ oobregion->length = 7;
+ } else {
+ oobregion->offset = 15;
+ oobregion->length = 1;
+ }
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops nand_ooblayout_docg3_ops = {
+ .ecc = docg3_ooblayout_ecc,
+ .free = docg3_ooblayout_free,
};
static inline u8 doc_readb(struct docg3 *docg3, u16 reg)
@@ -1857,7 +1881,7 @@ static int __init doc_set_driver_info(int chip_id, struct mtd_info *mtd)
mtd->_read_oob = doc_read_oob;
mtd->_write_oob = doc_write_oob;
mtd->_block_isbad = doc_block_isbad;
- mtd->ecclayout = &docg3_oobinfo;
+ mtd_set_ooblayout(mtd, &nand_ooblayout_docg3_ops);
mtd->oobavail = 8;
mtd->ecc_strength = DOC_ECC_BCH_T;
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index c9c3b7fa3051..9d6854467651 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -131,6 +131,28 @@ static int m25p80_read(struct spi_nor *nor, loff_t from, size_t len,
/* convert the dummy cycles to the number of bytes */
dummy /= 8;
+ if (spi_flash_read_supported(spi)) {
+ struct spi_flash_read_message msg;
+ int ret;
+
+ memset(&msg, 0, sizeof(msg));
+
+ msg.buf = buf;
+ msg.from = from;
+ msg.len = len;
+ msg.read_opcode = nor->read_opcode;
+ msg.addr_width = nor->addr_width;
+ msg.dummy_bytes = dummy;
+ /* TODO: Support other combinations */
+ msg.opcode_nbits = SPI_NBITS_SINGLE;
+ msg.addr_nbits = SPI_NBITS_SINGLE;
+ msg.data_nbits = m25p80_rx_nbits(nor);
+
+ ret = spi_flash_read(spi, &msg);
+ *retlen = msg.retlen;
+ return ret;
+ }
+
spi_message_init(&m);
memset(t, 0, (sizeof t));
diff --git a/drivers/mtd/devices/pmc551.c b/drivers/mtd/devices/pmc551.c
index 708b7e8c8b18..220f9200fa52 100644
--- a/drivers/mtd/devices/pmc551.c
+++ b/drivers/mtd/devices/pmc551.c
@@ -353,7 +353,7 @@ static int pmc551_write(struct mtd_info *mtd, loff_t to, size_t len,
* mechanism
* returns the size of the memory region found.
*/
-static int fixup_pmc551(struct pci_dev *dev)
+static int __init fixup_pmc551(struct pci_dev *dev)
{
#ifdef CONFIG_MTD_PMC551_BUGFIX
u32 dram_data;
diff --git a/drivers/mtd/maps/ck804xrom.c b/drivers/mtd/maps/ck804xrom.c
index 0455166f05fa..4f206a99164c 100644
--- a/drivers/mtd/maps/ck804xrom.c
+++ b/drivers/mtd/maps/ck804xrom.c
@@ -112,8 +112,8 @@ static void ck804xrom_cleanup(struct ck804xrom_window *window)
}
-static int ck804xrom_init_one(struct pci_dev *pdev,
- const struct pci_device_id *ent)
+static int __init ck804xrom_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
{
static char *rom_probe_types[] = { "cfi_probe", "jedec_probe", NULL };
u8 byte;
diff --git a/drivers/mtd/maps/esb2rom.c b/drivers/mtd/maps/esb2rom.c
index 76ed651b515b..9646b0766ce0 100644
--- a/drivers/mtd/maps/esb2rom.c
+++ b/drivers/mtd/maps/esb2rom.c
@@ -144,8 +144,8 @@ static void esb2rom_cleanup(struct esb2rom_window *window)
pci_dev_put(window->pdev);
}
-static int esb2rom_init_one(struct pci_dev *pdev,
- const struct pci_device_id *ent)
+static int __init esb2rom_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
{
static char *rom_probe_types[] = { "cfi_probe", "jedec_probe", NULL };
struct esb2rom_window *window = &esb2rom_window;
diff --git a/drivers/mtd/maps/ichxrom.c b/drivers/mtd/maps/ichxrom.c
index 8636bba42200..e17d02ae03f0 100644
--- a/drivers/mtd/maps/ichxrom.c
+++ b/drivers/mtd/maps/ichxrom.c
@@ -84,8 +84,8 @@ static void ichxrom_cleanup(struct ichxrom_window *window)
}
-static int ichxrom_init_one(struct pci_dev *pdev,
- const struct pci_device_id *ent)
+static int __init ichxrom_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
{
static char *rom_probe_types[] = { "cfi_probe", "jedec_probe", NULL };
struct ichxrom_window *window = &ichxrom_window;
diff --git a/drivers/mtd/maps/uclinux.c b/drivers/mtd/maps/uclinux.c
index c1af83db5202..00a8190797ec 100644
--- a/drivers/mtd/maps/uclinux.c
+++ b/drivers/mtd/maps/uclinux.c
@@ -4,11 +4,13 @@
* uclinux.c -- generic memory mapped MTD driver for uclinux
*
* (C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
+ *
+ * License: GPL
*/
/****************************************************************************/
-#include <linux/module.h>
+#include <linux/moduleparam.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/kernel.h>
@@ -117,27 +119,6 @@ static int __init uclinux_mtd_init(void)
return(0);
}
-
-/****************************************************************************/
-
-static void __exit uclinux_mtd_cleanup(void)
-{
- if (uclinux_ram_mtdinfo) {
- mtd_device_unregister(uclinux_ram_mtdinfo);
- map_destroy(uclinux_ram_mtdinfo);
- uclinux_ram_mtdinfo = NULL;
- }
- if (uclinux_ram_map.virt)
- uclinux_ram_map.virt = 0;
-}
-
-/****************************************************************************/
-
-module_init(uclinux_mtd_init);
-module_exit(uclinux_mtd_cleanup);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Greg Ungerer <gerg@snapgear.com>");
-MODULE_DESCRIPTION("Generic MTD for uClinux");
+device_initcall(uclinux_mtd_init);
/****************************************************************************/
diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
index 6d19835b80a9..2a47a3f0e730 100644
--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -465,35 +465,108 @@ static int mtdchar_readoob(struct file *file, struct mtd_info *mtd,
}
/*
- * Copies (and truncates, if necessary) data from the larger struct,
- * nand_ecclayout, to the smaller, deprecated layout struct,
- * nand_ecclayout_user. This is necessary only to support the deprecated
- * API ioctl ECCGETLAYOUT while allowing all new functionality to use
- * nand_ecclayout flexibly (i.e. the struct may change size in new
- * releases without requiring major rewrites).
+ * Copies (and truncates, if necessary) OOB layout information to the
+ * deprecated layout struct, nand_ecclayout_user. This is necessary only to
+ * support the deprecated API ioctl ECCGETLAYOUT while allowing all new
+ * functionality to use mtd_ooblayout_ops flexibly (i.e. mtd_ooblayout_ops
+ * can describe any kind of OOB layout with almost zero overhead from a
+ * memory usage point of view).
*/
-static int shrink_ecclayout(const struct nand_ecclayout *from,
- struct nand_ecclayout_user *to)
+static int shrink_ecclayout(struct mtd_info *mtd,
+ struct nand_ecclayout_user *to)
{
- int i;
+ struct mtd_oob_region oobregion;
+ int i, section = 0, ret;
- if (!from || !to)
+ if (!mtd || !to)
return -EINVAL;
memset(to, 0, sizeof(*to));
- to->eccbytes = min((int)from->eccbytes, MTD_MAX_ECCPOS_ENTRIES);
- for (i = 0; i < to->eccbytes; i++)
- to->eccpos[i] = from->eccpos[i];
+ to->eccbytes = 0;
+ for (i = 0; i < MTD_MAX_ECCPOS_ENTRIES;) {
+ u32 eccpos;
+
+ ret = mtd_ooblayout_ecc(mtd, section, &oobregion);
+ if (ret < 0) {
+ if (ret != -ERANGE)
+ return ret;
+
+ break;
+ }
+
+ eccpos = oobregion.offset;
+ for (; i < MTD_MAX_ECCPOS_ENTRIES &&
+ eccpos < oobregion.offset + oobregion.length; i++) {
+ to->eccpos[i] = eccpos++;
+ to->eccbytes++;
+ }
+ }
for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES; i++) {
- if (from->oobfree[i].length == 0 &&
- from->oobfree[i].offset == 0)
+ ret = mtd_ooblayout_free(mtd, i, &oobregion);
+ if (ret < 0) {
+ if (ret != -ERANGE)
+ return ret;
+
+ break;
+ }
+
+ to->oobfree[i].offset = oobregion.offset;
+ to->oobfree[i].length = oobregion.length;
+ to->oobavail += to->oobfree[i].length;
+ }
+
+ return 0;
+}
+
+static int get_oobinfo(struct mtd_info *mtd, struct nand_oobinfo *to)
+{
+ struct mtd_oob_region oobregion;
+ int i, section = 0, ret;
+
+ if (!mtd || !to)
+ return -EINVAL;
+
+ memset(to, 0, sizeof(*to));
+
+ to->eccbytes = 0;
+ for (i = 0; i < ARRAY_SIZE(to->eccpos);) {
+ u32 eccpos;
+
+ ret = mtd_ooblayout_ecc(mtd, section, &oobregion);
+ if (ret < 0) {
+ if (ret != -ERANGE)
+ return ret;
+
break;
- to->oobavail += from->oobfree[i].length;
- to->oobfree[i] = from->oobfree[i];
+ }
+
+ if (oobregion.length + i > ARRAY_SIZE(to->eccpos))
+ return -EINVAL;
+
+ eccpos = oobregion.offset;
+ for (; eccpos < oobregion.offset + oobregion.length; i++) {
+ to->eccpos[i] = eccpos++;
+ to->eccbytes++;
+ }
}
+ for (i = 0; i < 8; i++) {
+ ret = mtd_ooblayout_free(mtd, i, &oobregion);
+ if (ret < 0) {
+ if (ret != -ERANGE)
+ return ret;
+
+ break;
+ }
+
+ to->oobfree[i][0] = oobregion.offset;
+ to->oobfree[i][1] = oobregion.length;
+ }
+
+ to->useecc = MTD_NANDECC_AUTOPLACE;
+
return 0;
}
@@ -815,16 +888,12 @@ static int mtdchar_ioctl(struct file *file, u_int cmd, u_long arg)
{
struct nand_oobinfo oi;
- if (!mtd->ecclayout)
+ if (!mtd->ooblayout)
return -EOPNOTSUPP;
- if (mtd->ecclayout->eccbytes > ARRAY_SIZE(oi.eccpos))
- return -EINVAL;
- oi.useecc = MTD_NANDECC_AUTOPLACE;
- memcpy(&oi.eccpos, mtd->ecclayout->eccpos, sizeof(oi.eccpos));
- memcpy(&oi.oobfree, mtd->ecclayout->oobfree,
- sizeof(oi.oobfree));
- oi.eccbytes = mtd->ecclayout->eccbytes;
+ ret = get_oobinfo(mtd, &oi);
+ if (ret)
+ return ret;
if (copy_to_user(argp, &oi, sizeof(struct nand_oobinfo)))
return -EFAULT;
@@ -913,14 +982,14 @@ static int mtdchar_ioctl(struct file *file, u_int cmd, u_long arg)
{
struct nand_ecclayout_user *usrlay;
- if (!mtd->ecclayout)
+ if (!mtd->ooblayout)
return -EOPNOTSUPP;
usrlay = kmalloc(sizeof(*usrlay), GFP_KERNEL);
if (!usrlay)
return -ENOMEM;
- shrink_ecclayout(mtd->ecclayout, usrlay);
+ shrink_ecclayout(mtd, usrlay);
if (copy_to_user(argp, usrlay, sizeof(*usrlay)))
ret = -EFAULT;
diff --git a/drivers/mtd/mtdconcat.c b/drivers/mtd/mtdconcat.c
index 239a8c806b67..d573606b91c2 100644
--- a/drivers/mtd/mtdconcat.c
+++ b/drivers/mtd/mtdconcat.c
@@ -777,7 +777,7 @@ struct mtd_info *mtd_concat_create(struct mtd_info *subdev[], /* subdevices to c
}
- concat->mtd.ecclayout = subdev[0]->ecclayout;
+ mtd_set_ooblayout(&concat->mtd, subdev[0]->ooblayout);
concat->num_subdev = num_devs;
concat->mtd.name = name;
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index bee180bd11e7..e3936b847c6b 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -1016,6 +1016,366 @@ int mtd_write_oob(struct mtd_info *mtd, loff_t to,
}
EXPORT_SYMBOL_GPL(mtd_write_oob);
+/**
+ * mtd_ooblayout_ecc - Get the OOB region definition of a specific ECC section
+ * @mtd: MTD device structure
+ * @section: ECC section. Depending on the layout you may have all the ECC
+ * bytes stored in a single contiguous section, or one section
+ * per ECC chunk (and sometime several sections for a single ECC
+ * ECC chunk)
+ * @oobecc: OOB region struct filled with the appropriate ECC position
+ * information
+ *
+ * This functions return ECC section information in the OOB area. I you want
+ * to get all the ECC bytes information, then you should call
+ * mtd_ooblayout_ecc(mtd, section++, oobecc) until it returns -ERANGE.
+ *
+ * Returns zero on success, a negative error code otherwise.
+ */
+int mtd_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobecc)
+{
+ memset(oobecc, 0, sizeof(*oobecc));
+
+ if (!mtd || section < 0)
+ return -EINVAL;
+
+ if (!mtd->ooblayout || !mtd->ooblayout->ecc)
+ return -ENOTSUPP;
+
+ return mtd->ooblayout->ecc(mtd, section, oobecc);
+}
+EXPORT_SYMBOL_GPL(mtd_ooblayout_ecc);
+
+/**
+ * mtd_ooblayout_free - Get the OOB region definition of a specific free
+ * section
+ * @mtd: MTD device structure
+ * @section: Free section you are interested in. Depending on the layout
+ * you may have all the free bytes stored in a single contiguous
+ * section, or one section per ECC chunk plus an extra section
+ * for the remaining bytes (or other funky layout).
+ * @oobfree: OOB region struct filled with the appropriate free position
+ * information
+ *
+ * This functions return free bytes position in the OOB area. I you want
+ * to get all the free bytes information, then you should call
+ * mtd_ooblayout_free(mtd, section++, oobfree) until it returns -ERANGE.
+ *
+ * Returns zero on success, a negative error code otherwise.
+ */
+int mtd_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobfree)
+{
+ memset(oobfree, 0, sizeof(*oobfree));
+
+ if (!mtd || section < 0)
+ return -EINVAL;
+
+ if (!mtd->ooblayout || !mtd->ooblayout->free)
+ return -ENOTSUPP;
+
+ return mtd->ooblayout->free(mtd, section, oobfree);
+}
+EXPORT_SYMBOL_GPL(mtd_ooblayout_free);
+
+/**
+ * mtd_ooblayout_find_region - Find the region attached to a specific byte
+ * @mtd: mtd info structure
+ * @byte: the byte we are searching for
+ * @sectionp: pointer where the section id will be stored
+ * @oobregion: used to retrieve the ECC position
+ * @iter: iterator function. Should be either mtd_ooblayout_free or
+ * mtd_ooblayout_ecc depending on the region type you're searching for
+ *
+ * This functions returns the section id and oobregion information of a
+ * specific byte. For example, say you want to know where the 4th ECC byte is
+ * stored, you'll use:
+ *
+ * mtd_ooblayout_find_region(mtd, 3, &section, &oobregion, mtd_ooblayout_ecc);
+ *
+ * Returns zero on success, a negative error code otherwise.
+ */
+static int mtd_ooblayout_find_region(struct mtd_info *mtd, int byte,
+ int *sectionp, struct mtd_oob_region *oobregion,
+ int (*iter)(struct mtd_info *,
+ int section,
+ struct mtd_oob_region *oobregion))
+{
+ int pos = 0, ret, section = 0;
+
+ memset(oobregion, 0, sizeof(*oobregion));
+
+ while (1) {
+ ret = iter(mtd, section, oobregion);
+ if (ret)
+ return ret;
+
+ if (pos + oobregion->length > byte)
+ break;
+
+ pos += oobregion->length;
+ section++;
+ }
+
+ /*
+ * Adjust region info to make it start at the beginning at the
+ * 'start' ECC byte.
+ */
+ oobregion->offset += byte - pos;
+ oobregion->length -= byte - pos;
+ *sectionp = section;
+
+ return 0;
+}
+
+/**
+ * mtd_ooblayout_find_eccregion - Find the ECC region attached to a specific
+ * ECC byte
+ * @mtd: mtd info structure
+ * @eccbyte: the byte we are searching for
+ * @sectionp: pointer where the section id will be stored
+ * @oobregion: OOB region information
+ *
+ * Works like mtd_ooblayout_find_region() except it searches for a specific ECC
+ * byte.
+ *
+ * Returns zero on success, a negative error code otherwise.
+ */
+int mtd_ooblayout_find_eccregion(struct mtd_info *mtd, int eccbyte,
+ int *section,
+ struct mtd_oob_region *oobregion)
+{
+ return mtd_ooblayout_find_region(mtd, eccbyte, section, oobregion,
+ mtd_ooblayout_ecc);
+}
+EXPORT_SYMBOL_GPL(mtd_ooblayout_find_eccregion);
+
+/**
+ * mtd_ooblayout_get_bytes - Extract OOB bytes from the oob buffer
+ * @mtd: mtd info structure
+ * @buf: destination buffer to store OOB bytes
+ * @oobbuf: OOB buffer
+ * @start: first byte to retrieve
+ * @nbytes: number of bytes to retrieve
+ * @iter: section iterator
+ *
+ * Extract bytes attached to a specific category (ECC or free)
+ * from the OOB buffer and copy them into buf.
+ *
+ * Returns zero on success, a negative error code otherwise.
+ */
+static int mtd_ooblayout_get_bytes(struct mtd_info *mtd, u8 *buf,
+ const u8 *oobbuf, int start, int nbytes,
+ int (*iter)(struct mtd_info *,
+ int section,
+ struct mtd_oob_region *oobregion))
+{
+ struct mtd_oob_region oobregion = { };
+ int section = 0, ret;
+
+ ret = mtd_ooblayout_find_region(mtd, start, &section,
+ &oobregion, iter);
+
+ while (!ret) {
+ int cnt;
+
+ cnt = oobregion.length > nbytes ? nbytes : oobregion.length;
+ memcpy(buf, oobbuf + oobregion.offset, cnt);
+ buf += cnt;
+ nbytes -= cnt;
+
+ if (!nbytes)
+ break;
+
+ ret = iter(mtd, ++section, &oobregion);
+ }
+
+ return ret;
+}
+
+/**
+ * mtd_ooblayout_set_bytes - put OOB bytes into the oob buffer
+ * @mtd: mtd info structure
+ * @buf: source buffer to get OOB bytes from
+ * @oobbuf: OOB buffer
+ * @start: first OOB byte to set
+ * @nbytes: number of OOB bytes to set
+ * @iter: section iterator
+ *
+ * Fill the OOB buffer with data provided in buf. The category (ECC or free)
+ * is selected by passing the appropriate iterator.
+ *
+ * Returns zero on success, a negative error code otherwise.
+ */
+static int mtd_ooblayout_set_bytes(struct mtd_info *mtd, const u8 *buf,
+ u8 *oobbuf, int start, int nbytes,
+ int (*iter)(struct mtd_info *,
+ int section,
+ struct mtd_oob_region *oobregion))
+{
+ struct mtd_oob_region oobregion = { };
+ int section = 0, ret;
+
+ ret = mtd_ooblayout_find_region(mtd, start, &section,
+ &oobregion, iter);
+
+ while (!ret) {
+ int cnt;
+
+ cnt = oobregion.length > nbytes ? nbytes : oobregion.length;
+ memcpy(oobbuf + oobregion.offset, buf, cnt);
+ buf += cnt;
+ nbytes -= cnt;
+
+ if (!nbytes)
+ break;
+
+ ret = iter(mtd, ++section, &oobregion);
+ }
+
+ return ret;
+}
+
+/**
+ * mtd_ooblayout_count_bytes - count the number of bytes in a OOB category
+ * @mtd: mtd info structure
+ * @iter: category iterator
+ *
+ * Count the number of bytes in a given category.
+ *
+ * Returns a positive value on success, a negative error code otherwise.
+ */
+static int mtd_ooblayout_count_bytes(struct mtd_info *mtd,
+ int (*iter)(struct mtd_info *,
+ int section,
+ struct mtd_oob_region *oobregion))
+{
+ struct mtd_oob_region oobregion = { };
+ int section = 0, ret, nbytes = 0;
+
+ while (1) {
+ ret = iter(mtd, section++, &oobregion);
+ if (ret) {
+ if (ret == -ERANGE)
+ ret = nbytes;
+ break;
+ }
+
+ nbytes += oobregion.length;
+ }
+
+ return ret;
+}
+
+/**
+ * mtd_ooblayout_get_eccbytes - extract ECC bytes from the oob buffer
+ * @mtd: mtd info structure
+ * @eccbuf: destination buffer to store ECC bytes
+ * @oobbuf: OOB buffer
+ * @start: first ECC byte to retrieve
+ * @nbytes: number of ECC bytes to retrieve
+ *
+ * Works like mtd_ooblayout_get_bytes(), except it acts on ECC bytes.
+ *
+ * Returns zero on success, a negative error code otherwise.
+ */
+int mtd_ooblayout_get_eccbytes(struct mtd_info *mtd, u8 *eccbuf,
+ const u8 *oobbuf, int start, int nbytes)
+{
+ return mtd_ooblayout_get_bytes(mtd, eccbuf, oobbuf, start, nbytes,
+ mtd_ooblayout_ecc);
+}
+EXPORT_SYMBOL_GPL(mtd_ooblayout_get_eccbytes);
+
+/**
+ * mtd_ooblayout_set_eccbytes - set ECC bytes into the oob buffer
+ * @mtd: mtd info structure
+ * @eccbuf: source buffer to get ECC bytes from
+ * @oobbuf: OOB buffer
+ * @start: first ECC byte to set
+ * @nbytes: number of ECC bytes to set
+ *
+ * Works like mtd_ooblayout_set_bytes(), except it acts on ECC bytes.
+ *
+ * Returns zero on success, a negative error code otherwise.
+ */
+int mtd_ooblayout_set_eccbytes(struct mtd_info *mtd, const u8 *eccbuf,
+ u8 *oobbuf, int start, int nbytes)
+{
+ return mtd_ooblayout_set_bytes(mtd, eccbuf, oobbuf, start, nbytes,
+ mtd_ooblayout_ecc);
+}
+EXPORT_SYMBOL_GPL(mtd_ooblayout_set_eccbytes);
+
+/**
+ * mtd_ooblayout_get_databytes - extract data bytes from the oob buffer
+ * @mtd: mtd info structure
+ * @databuf: destination buffer to store ECC bytes
+ * @oobbuf: OOB buffer
+ * @start: first ECC byte to retrieve
+ * @nbytes: number of ECC bytes to retrieve
+ *
+ * Works like mtd_ooblayout_get_bytes(), except it acts on free bytes.
+ *
+ * Returns zero on success, a negative error code otherwise.
+ */
+int mtd_ooblayout_get_databytes(struct mtd_info *mtd, u8 *databuf,
+ const u8 *oobbuf, int start, int nbytes)
+{
+ return mtd_ooblayout_get_bytes(mtd, databuf, oobbuf, start, nbytes,
+ mtd_ooblayout_free);
+}
+EXPORT_SYMBOL_GPL(mtd_ooblayout_get_databytes);
+
+/**
+ * mtd_ooblayout_get_eccbytes - set data bytes into the oob buffer
+ * @mtd: mtd info structure
+ * @eccbuf: source buffer to get data bytes from
+ * @oobbuf: OOB buffer
+ * @start: first ECC byte to set
+ * @nbytes: number of ECC bytes to set
+ *
+ * Works like mtd_ooblayout_get_bytes(), except it acts on free bytes.
+ *
+ * Returns zero on success, a negative error code otherwise.
+ */
+int mtd_ooblayout_set_databytes(struct mtd_info *mtd, const u8 *databuf,
+ u8 *oobbuf, int start, int nbytes)
+{
+ return mtd_ooblayout_set_bytes(mtd, databuf, oobbuf, start, nbytes,
+ mtd_ooblayout_free);
+}
+EXPORT_SYMBOL_GPL(mtd_ooblayout_set_databytes);
+
+/**
+ * mtd_ooblayout_count_freebytes - count the number of free bytes in OOB
+ * @mtd: mtd info structure
+ *
+ * Works like mtd_ooblayout_count_bytes(), except it count free bytes.
+ *
+ * Returns zero on success, a negative error code otherwise.
+ */
+int mtd_ooblayout_count_freebytes(struct mtd_info *mtd)
+{
+ return mtd_ooblayout_count_bytes(mtd, mtd_ooblayout_free);
+}
+EXPORT_SYMBOL_GPL(mtd_ooblayout_count_freebytes);
+
+/**
+ * mtd_ooblayout_count_freebytes - count the number of ECC bytes in OOB
+ * @mtd: mtd info structure
+ *
+ * Works like mtd_ooblayout_count_bytes(), except it count ECC bytes.
+ *
+ * Returns zero on success, a negative error code otherwise.
+ */
+int mtd_ooblayout_count_eccbytes(struct mtd_info *mtd)
+{
+ return mtd_ooblayout_count_bytes(mtd, mtd_ooblayout_ecc);
+}
+EXPORT_SYMBOL_GPL(mtd_ooblayout_count_eccbytes);
+
/*
* Method to access the protection register area, present in some flash
* devices. The user data is one time programmable but the factory data is read
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index 08de4b2cf0f5..1f13e32556f8 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -317,6 +317,27 @@ static int part_block_markbad(struct mtd_info *mtd, loff_t ofs)
return res;
}
+static int part_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct mtd_part *part = mtd_to_part(mtd);
+
+ return mtd_ooblayout_ecc(part->master, section, oobregion);
+}
+
+static int part_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct mtd_part *part = mtd_to_part(mtd);
+
+ return mtd_ooblayout_free(part->master, section, oobregion);
+}
+
+static const struct mtd_ooblayout_ops part_ooblayout_ops = {
+ .ecc = part_ooblayout_ecc,
+ .free = part_ooblayout_free,
+};
+
static inline void free_partition(struct mtd_part *p)
{
kfree(p->mtd.name);
@@ -533,7 +554,7 @@ static struct mtd_part *allocate_partition(struct mtd_info *master,
part->name);
}
- slave->mtd.ecclayout = master->ecclayout;
+ mtd_set_ooblayout(&slave->mtd, &part_ooblayout_ops);
slave->mtd.ecc_step_size = master->ecc_step_size;
slave->mtd.ecc_strength = master->ecc_strength;
slave->mtd.bitflip_threshold = master->bitflip_threshold;
diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c
index 68b58c85789c..78e12cc8bac2 100644
--- a/drivers/mtd/nand/ams-delta.c
+++ b/drivers/mtd/nand/ams-delta.c
@@ -224,6 +224,7 @@ static int ams_delta_init(struct platform_device *pdev)
/* 25 us command delay time */
this->chip_delay = 30;
this->ecc.mode = NAND_ECC_SOFT;
+ this->ecc.algo = NAND_ECC_HAMMING;
platform_set_drvdata(pdev, io_base);
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 20cbaabb2959..efc8ea250c1d 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -36,7 +36,6 @@
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_gpio.h>
-#include <linux/of_mtd.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
@@ -72,30 +71,44 @@ struct atmel_nand_nfc_caps {
uint32_t rb_mask;
};
-/* oob layout for large page size
+/*
+ * oob layout for large page size
* bad block info is on bytes 0 and 1
* the bytes have to be consecutives to avoid
* several NAND_CMD_RNDOUT during read
- */
-static struct nand_ecclayout atmel_oobinfo_large = {
- .eccbytes = 4,
- .eccpos = {60, 61, 62, 63},
- .oobfree = {
- {2, 58}
- },
-};
-
-/* oob layout for small page size
+ *
+ * oob layout for small page size
* bad block info is on bytes 4 and 5
* the bytes have to be consecutives to avoid
* several NAND_CMD_RNDOUT during read
*/
-static struct nand_ecclayout atmel_oobinfo_small = {
- .eccbytes = 4,
- .eccpos = {0, 1, 2, 3},
- .oobfree = {
- {6, 10}
- },
+static int atmel_ooblayout_ecc_sp(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section)
+ return -ERANGE;
+
+ oobregion->length = 4;
+ oobregion->offset = 0;
+
+ return 0;
+}
+
+static int atmel_ooblayout_free_sp(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section)
+ return -ERANGE;
+
+ oobregion->offset = 6;
+ oobregion->length = mtd->oobsize - oobregion->offset;
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops atmel_ooblayout_sp_ops = {
+ .ecc = atmel_ooblayout_ecc_sp,
+ .free = atmel_ooblayout_free_sp,
};
struct atmel_nfc {
@@ -163,8 +176,6 @@ struct atmel_nand_host {
int *pmecc_delta;
};
-static struct nand_ecclayout atmel_pmecc_oobinfo;
-
/*
* Enable NAND.
*/
@@ -434,14 +445,13 @@ err_buf:
static void atmel_read_buf(struct mtd_info *mtd, u8 *buf, int len)
{
struct nand_chip *chip = mtd_to_nand(mtd);
- struct atmel_nand_host *host = nand_get_controller_data(chip);
if (use_dma && len > mtd->oobsize)
/* only use DMA for bigger than oob size: better performances */
if (atmel_nand_dma_op(mtd, buf, len, 1) == 0)
return;
- if (host->board.bus_width_16)
+ if (chip->options & NAND_BUSWIDTH_16)
atmel_read_buf16(mtd, buf, len);
else
atmel_read_buf8(mtd, buf, len);
@@ -450,14 +460,13 @@ static void atmel_read_buf(struct mtd_info *mtd, u8 *buf, int len)
static void atmel_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
{
struct nand_chip *chip = mtd_to_nand(mtd);
- struct atmel_nand_host *host = nand_get_controller_data(chip);
if (use_dma && len > mtd->oobsize)
/* only use DMA for bigger than oob size: better performances */
if (atmel_nand_dma_op(mtd, (void *)buf, len, 0) == 0)
return;
- if (host->board.bus_width_16)
+ if (chip->options & NAND_BUSWIDTH_16)
atmel_write_buf16(mtd, buf, len);
else
atmel_write_buf8(mtd, buf, len);
@@ -483,22 +492,6 @@ static int pmecc_get_ecc_bytes(int cap, int sector_size)
return (m * cap + 7) / 8;
}
-static void pmecc_config_ecc_layout(struct nand_ecclayout *layout,
- int oobsize, int ecc_len)
-{
- int i;
-
- layout->eccbytes = ecc_len;
-
- /* ECC will occupy the last ecc_len bytes continuously */
- for (i = 0; i < ecc_len; i++)
- layout->eccpos[i] = oobsize - ecc_len + i;
-
- layout->oobfree[0].offset = PMECC_OOB_RESERVED_BYTES;
- layout->oobfree[0].length =
- oobsize - ecc_len - layout->oobfree[0].offset;
-}
-
static void __iomem *pmecc_get_alpha_to(struct atmel_nand_host *host)
{
int table_size;
@@ -836,13 +829,16 @@ static void pmecc_correct_data(struct mtd_info *mtd, uint8_t *buf, uint8_t *ecc,
dev_dbg(host->dev, "Bit flip in data area, byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
pos, bit_pos, err_byte, *(buf + byte_pos));
} else {
+ struct mtd_oob_region oobregion;
+
/* Bit flip in OOB area */
tmp = sector_num * nand_chip->ecc.bytes
+ (byte_pos - sector_size);
err_byte = ecc[tmp];
ecc[tmp] ^= (1 << bit_pos);
- pos = tmp + nand_chip->ecc.layout->eccpos[0];
+ mtd_ooblayout_ecc(mtd, 0, &oobregion);
+ pos = tmp + oobregion.offset;
dev_dbg(host->dev, "Bit flip in OOB, oob_byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
pos, bit_pos, err_byte, ecc[tmp]);
}
@@ -863,17 +859,6 @@ static int pmecc_correction(struct mtd_info *mtd, u32 pmecc_stat, uint8_t *buf,
uint8_t *buf_pos;
int max_bitflips = 0;
- /* If can correct bitfilps from erased page, do the normal check */
- if (host->caps->pmecc_correct_erase_page)
- goto normal_check;
-
- for (i = 0; i < nand_chip->ecc.total; i++)
- if (ecc[i] != 0xff)
- goto normal_check;
- /* Erased page, return OK */
- return 0;
-
-normal_check:
for (i = 0; i < nand_chip->ecc.steps; i++) {
err_nbr = 0;
if (pmecc_stat & 0x1) {
@@ -884,16 +869,30 @@ normal_check:
pmecc_get_sigma(mtd);
err_nbr = pmecc_err_location(mtd);
- if (err_nbr == -1) {
+ if (err_nbr >= 0) {
+ pmecc_correct_data(mtd, buf_pos, ecc, i,
+ nand_chip->ecc.bytes,
+ err_nbr);
+ } else if (!host->caps->pmecc_correct_erase_page) {
+ u8 *ecc_pos = ecc + (i * nand_chip->ecc.bytes);
+
+ /* Try to detect erased pages */
+ err_nbr = nand_check_erased_ecc_chunk(buf_pos,
+ host->pmecc_sector_size,
+ ecc_pos,
+ nand_chip->ecc.bytes,
+ NULL, 0,
+ nand_chip->ecc.strength);
+ }
+
+ if (err_nbr < 0) {
dev_err(host->dev, "PMECC: Too many errors\n");
mtd->ecc_stats.failed++;
return -EIO;
- } else {
- pmecc_correct_data(mtd, buf_pos, ecc, i,
- nand_chip->ecc.bytes, err_nbr);
- mtd->ecc_stats.corrected += err_nbr;
- max_bitflips = max_t(int, max_bitflips, err_nbr);
}
+
+ mtd->ecc_stats.corrected += err_nbr;
+ max_bitflips = max_t(int, max_bitflips, err_nbr);
}
pmecc_stat >>= 1;
}
@@ -931,7 +930,6 @@ static int atmel_nand_pmecc_read_page(struct mtd_info *mtd,
struct atmel_nand_host *host = nand_get_controller_data(chip);
int eccsize = chip->ecc.size * chip->ecc.steps;
uint8_t *oob = chip->oob_poi;
- uint32_t *eccpos = chip->ecc.layout->eccpos;
uint32_t stat;
unsigned long end_time;
int bitflips = 0;
@@ -953,7 +951,11 @@ static int atmel_nand_pmecc_read_page(struct mtd_info *mtd,
stat = pmecc_readl_relaxed(host->ecc, ISR);
if (stat != 0) {
- bitflips = pmecc_correction(mtd, stat, buf, &oob[eccpos[0]]);
+ struct mtd_oob_region oobregion;
+
+ mtd_ooblayout_ecc(mtd, 0, &oobregion);
+ bitflips = pmecc_correction(mtd, stat, buf,
+ &oob[oobregion.offset]);
if (bitflips < 0)
/* uncorrectable errors */
return 0;
@@ -967,8 +969,8 @@ static int atmel_nand_pmecc_write_page(struct mtd_info *mtd,
int page)
{
struct atmel_nand_host *host = nand_get_controller_data(chip);
- uint32_t *eccpos = chip->ecc.layout->eccpos;
- int i, j;
+ struct mtd_oob_region oobregion = { };
+ int i, j, section = 0;
unsigned long end_time;
if (!host->nfc || !host->nfc->write_by_sram) {
@@ -987,11 +989,14 @@ static int atmel_nand_pmecc_write_page(struct mtd_info *mtd,
for (i = 0; i < chip->ecc.steps; i++) {
for (j = 0; j < chip->ecc.bytes; j++) {
- int pos;
+ if (!oobregion.length)
+ mtd_ooblayout_ecc(mtd, section, &oobregion);
- pos = i * chip->ecc.bytes + j;
- chip->oob_poi[eccpos[pos]] =
+ chip->oob_poi[oobregion.offset] =
pmecc_readb_ecc_relaxed(host->ecc, i, j);
+ oobregion.length--;
+ oobregion.offset++;
+ section++;
}
}
chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
@@ -1003,8 +1008,9 @@ static void atmel_pmecc_core_init(struct mtd_info *mtd)
{
struct nand_chip *nand_chip = mtd_to_nand(mtd);
struct atmel_nand_host *host = nand_get_controller_data(nand_chip);
+ int eccbytes = mtd_ooblayout_count_eccbytes(mtd);
uint32_t val = 0;
- struct nand_ecclayout *ecc_layout;
+ struct mtd_oob_region oobregion;
pmecc_writel(host->ecc, CTRL, PMECC_CTRL_RST);
pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DISABLE);
@@ -1054,11 +1060,11 @@ static void atmel_pmecc_core_init(struct mtd_info *mtd)
| PMECC_CFG_AUTO_DISABLE);
pmecc_writel(host->ecc, CFG, val);
- ecc_layout = nand_chip->ecc.layout;
pmecc_writel(host->ecc, SAREA, mtd->oobsize - 1);
- pmecc_writel(host->ecc, SADDR, ecc_layout->eccpos[0]);
+ mtd_ooblayout_ecc(mtd, 0, &oobregion);
+ pmecc_writel(host->ecc, SADDR, oobregion.offset);
pmecc_writel(host->ecc, EADDR,
- ecc_layout->eccpos[ecc_layout->eccbytes - 1]);
+ oobregion.offset + eccbytes - 1);
/* See datasheet about PMECC Clock Control Register */
pmecc_writel(host->ecc, CLK, 2);
pmecc_writel(host->ecc, IDR, 0xff);
@@ -1206,6 +1212,7 @@ static int atmel_pmecc_nand_init_params(struct platform_device *pdev,
dev_warn(host->dev,
"Can't get I/O resource regs for PMECC controller, rolling back on software ECC\n");
nand_chip->ecc.mode = NAND_ECC_SOFT;
+ nand_chip->ecc.algo = NAND_ECC_HAMMING;
return 0;
}
@@ -1280,11 +1287,8 @@ static int atmel_pmecc_nand_init_params(struct platform_device *pdev,
err_no = -EINVAL;
goto err;
}
- pmecc_config_ecc_layout(&atmel_pmecc_oobinfo,
- mtd->oobsize,
- nand_chip->ecc.total);
- nand_chip->ecc.layout = &atmel_pmecc_oobinfo;
+ mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
break;
default:
dev_warn(host->dev,
@@ -1292,6 +1296,7 @@ static int atmel_pmecc_nand_init_params(struct platform_device *pdev,
/* page size not handled by HW ECC */
/* switching back to soft ECC */
nand_chip->ecc.mode = NAND_ECC_SOFT;
+ nand_chip->ecc.algo = NAND_ECC_HAMMING;
return 0;
}
@@ -1359,12 +1364,12 @@ static int atmel_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip,
{
int eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
- uint32_t *eccpos = chip->ecc.layout->eccpos;
uint8_t *p = buf;
uint8_t *oob = chip->oob_poi;
uint8_t *ecc_pos;
int stat;
unsigned int max_bitflips = 0;
+ struct mtd_oob_region oobregion = {};
/*
* Errata: ALE is incorrectly wired up to the ECC controller
@@ -1382,19 +1387,20 @@ static int atmel_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip,
chip->read_buf(mtd, p, eccsize);
/* move to ECC position if needed */
- if (eccpos[0] != 0) {
- /* This only works on large pages
- * because the ECC controller waits for
- * NAND_CMD_RNDOUTSTART after the
- * NAND_CMD_RNDOUT.
- * anyway, for small pages, the eccpos[0] == 0
+ mtd_ooblayout_ecc(mtd, 0, &oobregion);
+ if (oobregion.offset != 0) {
+ /*
+ * This only works on large pages because the ECC controller
+ * waits for NAND_CMD_RNDOUTSTART after the NAND_CMD_RNDOUT.
+ * Anyway, for small pages, the first ECC byte is at offset
+ * 0 in the OOB area.
*/
chip->cmdfunc(mtd, NAND_CMD_RNDOUT,
- mtd->writesize + eccpos[0], -1);
+ mtd->writesize + oobregion.offset, -1);
}
/* the ECC controller needs to read the ECC just after the data */
- ecc_pos = oob + eccpos[0];
+ ecc_pos = oob + oobregion.offset;
chip->read_buf(mtd, ecc_pos, eccbytes);
/* check if there's an error */
@@ -1504,58 +1510,17 @@ static void atmel_nand_hwctl(struct mtd_info *mtd, int mode)
ecc_writel(host->ecc, CR, ATMEL_ECC_RST);
}
-static int atmel_of_init_port(struct atmel_nand_host *host,
- struct device_node *np)
+static int atmel_of_init_ecc(struct atmel_nand_host *host,
+ struct device_node *np)
{
- u32 val;
u32 offset[2];
- int ecc_mode;
- struct atmel_nand_data *board = &host->board;
- enum of_gpio_flags flags = 0;
-
- host->caps = (struct atmel_nand_caps *)
- of_device_get_match_data(host->dev);
-
- if (of_property_read_u32(np, "atmel,nand-addr-offset", &val) == 0) {
- if (val >= 32) {
- dev_err(host->dev, "invalid addr-offset %u\n", val);
- return -EINVAL;
- }
- board->ale = val;
- }
-
- if (of_property_read_u32(np, "atmel,nand-cmd-offset", &val) == 0) {
- if (val >= 32) {
- dev_err(host->dev, "invalid cmd-offset %u\n", val);
- return -EINVAL;
- }
- board->cle = val;
- }
-
- ecc_mode = of_get_nand_ecc_mode(np);
-
- board->ecc_mode = ecc_mode < 0 ? NAND_ECC_SOFT : ecc_mode;
-
- board->on_flash_bbt = of_get_nand_on_flash_bbt(np);
-
- board->has_dma = of_property_read_bool(np, "atmel,nand-has-dma");
-
- if (of_get_nand_bus_width(np) == 16)
- board->bus_width_16 = 1;
-
- board->rdy_pin = of_get_gpio_flags(np, 0, &flags);
- board->rdy_pin_active_low = (flags == OF_GPIO_ACTIVE_LOW);
-
- board->enable_pin = of_get_gpio(np, 1);
- board->det_pin = of_get_gpio(np, 2);
+ u32 val;
host->has_pmecc = of_property_read_bool(np, "atmel,has-pmecc");
- /* load the nfc driver if there is */
- of_platform_populate(np, NULL, NULL, host->dev);
-
- if (!(board->ecc_mode == NAND_ECC_HW) || !host->has_pmecc)
- return 0; /* Not using PMECC */
+ /* Not using PMECC */
+ if (!(host->nand_chip.ecc.mode == NAND_ECC_HW) || !host->has_pmecc)
+ return 0;
/* use PMECC, get correction capability, sector size and lookup
* table offset.
@@ -1596,16 +1561,65 @@ static int atmel_of_init_port(struct atmel_nand_host *host,
/* Will build a lookup table and initialize the offset later */
return 0;
}
+
if (!offset[0] && !offset[1]) {
dev_err(host->dev, "Invalid PMECC lookup table offset\n");
return -EINVAL;
}
+
host->pmecc_lookup_table_offset_512 = offset[0];
host->pmecc_lookup_table_offset_1024 = offset[1];
return 0;
}
+static int atmel_of_init_port(struct atmel_nand_host *host,
+ struct device_node *np)
+{
+ u32 val;
+ struct atmel_nand_data *board = &host->board;
+ enum of_gpio_flags flags = 0;
+
+ host->caps = (struct atmel_nand_caps *)
+ of_device_get_match_data(host->dev);
+
+ if (of_property_read_u32(np, "atmel,nand-addr-offset", &val) == 0) {
+ if (val >= 32) {
+ dev_err(host->dev, "invalid addr-offset %u\n", val);
+ return -EINVAL;
+ }
+ board->ale = val;
+ }
+
+ if (of_property_read_u32(np, "atmel,nand-cmd-offset", &val) == 0) {
+ if (val >= 32) {
+ dev_err(host->dev, "invalid cmd-offset %u\n", val);
+ return -EINVAL;
+ }
+ board->cle = val;
+ }
+
+ board->has_dma = of_property_read_bool(np, "atmel,nand-has-dma");
+
+ board->rdy_pin = of_get_gpio_flags(np, 0, &flags);
+ board->rdy_pin_active_low = (flags == OF_GPIO_ACTIVE_LOW);
+
+ board->enable_pin = of_get_gpio(np, 1);
+ board->det_pin = of_get_gpio(np, 2);
+
+ /* load the nfc driver if there is */
+ of_platform_populate(np, NULL, NULL, host->dev);
+
+ /*
+ * Initialize ECC mode to NAND_ECC_SOFT so that we have a correct value
+ * even if the nand-ecc-mode property is not defined.
+ */
+ host->nand_chip.ecc.mode = NAND_ECC_SOFT;
+ host->nand_chip.ecc.algo = NAND_ECC_HAMMING;
+
+ return 0;
+}
+
static int atmel_hw_nand_init_params(struct platform_device *pdev,
struct atmel_nand_host *host)
{
@@ -1618,6 +1632,7 @@ static int atmel_hw_nand_init_params(struct platform_device *pdev,
dev_err(host->dev,
"Can't get I/O resource regs, use software ECC\n");
nand_chip->ecc.mode = NAND_ECC_SOFT;
+ nand_chip->ecc.algo = NAND_ECC_HAMMING;
return 0;
}
@@ -1631,25 +1646,26 @@ static int atmel_hw_nand_init_params(struct platform_device *pdev,
/* set ECC page size and oob layout */
switch (mtd->writesize) {
case 512:
- nand_chip->ecc.layout = &atmel_oobinfo_small;
+ mtd_set_ooblayout(mtd, &atmel_ooblayout_sp_ops);
ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_528);
break;
case 1024:
- nand_chip->ecc.layout = &atmel_oobinfo_large;
+ mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_1056);
break;
case 2048:
- nand_chip->ecc.layout = &atmel_oobinfo_large;
+ mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_2112);
break;
case 4096:
- nand_chip->ecc.layout = &atmel_oobinfo_large;
+ mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_4224);
break;
default:
/* page size not handled by HW ECC */
/* switching back to soft ECC */
nand_chip->ecc.mode = NAND_ECC_SOFT;
+ nand_chip->ecc.algo = NAND_ECC_HAMMING;
return 0;
}
@@ -2147,6 +2163,19 @@ static int atmel_nand_probe(struct platform_device *pdev)
} else {
memcpy(&host->board, dev_get_platdata(&pdev->dev),
sizeof(struct atmel_nand_data));
+ nand_chip->ecc.mode = host->board.ecc_mode;
+
+ /*
+ * When using software ECC every supported avr32 board means
+ * Hamming algorithm. If that ever changes we'll need to add
+ * ecc_algo field to the struct atmel_nand_data.
+ */
+ if (nand_chip->ecc.mode == NAND_ECC_SOFT)
+ nand_chip->ecc.algo = NAND_ECC_HAMMING;
+
+ /* 16-bit bus width */
+ if (host->board.bus_width_16)
+ nand_chip->options |= NAND_BUSWIDTH_16;
}
/* link the private data structures */
@@ -2188,11 +2217,8 @@ static int atmel_nand_probe(struct platform_device *pdev)
nand_chip->cmd_ctrl = atmel_nand_cmd_ctrl;
}
- nand_chip->ecc.mode = host->board.ecc_mode;
nand_chip->chip_delay = 40; /* 40us command delay time */
- if (host->board.bus_width_16) /* 16-bit bus width */
- nand_chip->options |= NAND_BUSWIDTH_16;
nand_chip->read_buf = atmel_read_buf;
nand_chip->write_buf = atmel_write_buf;
@@ -2225,11 +2251,6 @@ static int atmel_nand_probe(struct platform_device *pdev)
}
}
- if (host->board.on_flash_bbt || on_flash_bbt) {
- dev_info(&pdev->dev, "Use On Flash BBT\n");
- nand_chip->bbt_options |= NAND_BBT_USE_FLASH;
- }
-
if (!host->board.has_dma)
use_dma = 0;
@@ -2256,6 +2277,18 @@ static int atmel_nand_probe(struct platform_device *pdev)
goto err_scan_ident;
}
+ if (host->board.on_flash_bbt || on_flash_bbt)
+ nand_chip->bbt_options |= NAND_BBT_USE_FLASH;
+
+ if (nand_chip->bbt_options & NAND_BBT_USE_FLASH)
+ dev_info(&pdev->dev, "Use On Flash BBT\n");
+
+ if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node) {
+ res = atmel_of_init_ecc(host, pdev->dev.of_node);
+ if (res)
+ goto err_hw_ecc;
+ }
+
if (nand_chip->ecc.mode == NAND_ECC_HW) {
if (host->has_pmecc)
res = atmel_pmecc_nand_init_params(pdev, host);
diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c
index 341ea4904164..9bf6d9915694 100644
--- a/drivers/mtd/nand/au1550nd.c
+++ b/drivers/mtd/nand/au1550nd.c
@@ -459,6 +459,7 @@ static int au1550nd_probe(struct platform_device *pdev)
/* 30 us command delay time */
this->chip_delay = 30;
this->ecc.mode = NAND_ECC_SOFT;
+ this->ecc.algo = NAND_ECC_HAMMING;
if (pd->devwidth)
this->options |= NAND_BUSWIDTH_16;
diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c
index 7f6b30e615b7..37da4236ab90 100644
--- a/drivers/mtd/nand/bf5xx_nand.c
+++ b/drivers/mtd/nand/bf5xx_nand.c
@@ -109,28 +109,33 @@ static const unsigned short bfin_nfc_pin_req[] =
0};
#ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC
-static struct nand_ecclayout bootrom_ecclayout = {
- .eccbytes = 24,
- .eccpos = {
- 0x8 * 0, 0x8 * 0 + 1, 0x8 * 0 + 2,
- 0x8 * 1, 0x8 * 1 + 1, 0x8 * 1 + 2,
- 0x8 * 2, 0x8 * 2 + 1, 0x8 * 2 + 2,
- 0x8 * 3, 0x8 * 3 + 1, 0x8 * 3 + 2,
- 0x8 * 4, 0x8 * 4 + 1, 0x8 * 4 + 2,
- 0x8 * 5, 0x8 * 5 + 1, 0x8 * 5 + 2,
- 0x8 * 6, 0x8 * 6 + 1, 0x8 * 6 + 2,
- 0x8 * 7, 0x8 * 7 + 1, 0x8 * 7 + 2
- },
- .oobfree = {
- { 0x8 * 0 + 3, 5 },
- { 0x8 * 1 + 3, 5 },
- { 0x8 * 2 + 3, 5 },
- { 0x8 * 3 + 3, 5 },
- { 0x8 * 4 + 3, 5 },
- { 0x8 * 5 + 3, 5 },
- { 0x8 * 6 + 3, 5 },
- { 0x8 * 7 + 3, 5 },
- }
+static int bootrom_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section > 7)
+ return -ERANGE;
+
+ oobregion->offset = section * 8;
+ oobregion->length = 3;
+
+ return 0;
+}
+
+static int bootrom_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section > 7)
+ return -ERANGE;
+
+ oobregion->offset = (section * 8) + 3;
+ oobregion->length = 5;
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops bootrom_ooblayout_ops = {
+ .ecc = bootrom_ooblayout_ecc,
+ .free = bootrom_ooblayout_free,
};
#endif
@@ -800,7 +805,7 @@ static int bf5xx_nand_probe(struct platform_device *pdev)
/* setup hardware ECC data struct */
if (hardware_ecc) {
#ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC
- chip->ecc.layout = &bootrom_ecclayout;
+ mtd_set_ooblayout(mtd, &bootrom_ooblayout_ops);
#endif
chip->read_buf = bf5xx_nand_dma_read_buf;
chip->write_buf = bf5xx_nand_dma_write_buf;
@@ -812,6 +817,7 @@ static int bf5xx_nand_probe(struct platform_device *pdev)
chip->ecc.write_page_raw = bf5xx_nand_write_page_raw;
} else {
chip->ecc.mode = NAND_ECC_SOFT;
+ chip->ecc.algo = NAND_ECC_HAMMING;
}
/* scan hardware nand chip and setup mtd info data struct */
diff --git a/drivers/mtd/nand/brcmnand/brcmnand.c b/drivers/mtd/nand/brcmnand/brcmnand.c
index e0528397306a..b76ad7c0144f 100644
--- a/drivers/mtd/nand/brcmnand/brcmnand.c
+++ b/drivers/mtd/nand/brcmnand/brcmnand.c
@@ -32,7 +32,6 @@
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/of.h>
-#include <linux/of_mtd.h>
#include <linux/of_platform.h>
#include <linux/slab.h>
#include <linux/list.h>
@@ -601,7 +600,7 @@ static void brcmnand_wr_corr_thresh(struct brcmnand_host *host, u8 val)
static inline int brcmnand_cmd_shift(struct brcmnand_controller *ctrl)
{
- if (ctrl->nand_version < 0x0700)
+ if (ctrl->nand_version < 0x0602)
return 24;
return 0;
}
@@ -781,127 +780,183 @@ static inline bool is_hamming_ecc(struct brcmnand_cfg *cfg)
}
/*
- * Returns a nand_ecclayout strucutre for the given layout/configuration.
- * Returns NULL on failure.
+ * Set mtd->ooblayout to the appropriate mtd_ooblayout_ops given
+ * the layout/configuration.
+ * Returns -ERRCODE on failure.
*/
-static struct nand_ecclayout *brcmnand_create_layout(int ecc_level,
- struct brcmnand_host *host)
+static int brcmnand_hamming_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct brcmnand_host *host = nand_get_controller_data(chip);
struct brcmnand_cfg *cfg = &host->hwcfg;
- int i, j;
- struct nand_ecclayout *layout;
- int req;
- int sectors;
- int sas;
- int idx1, idx2;
-
- layout = devm_kzalloc(&host->pdev->dev, sizeof(*layout), GFP_KERNEL);
- if (!layout)
- return NULL;
-
- sectors = cfg->page_size / (512 << cfg->sector_size_1k);
- sas = cfg->spare_area_size << cfg->sector_size_1k;
-
- /* Hamming */
- if (is_hamming_ecc(cfg)) {
- for (i = 0, idx1 = 0, idx2 = 0; i < sectors; i++) {
- /* First sector of each page may have BBI */
- if (i == 0) {
- layout->oobfree[idx2].offset = i * sas + 1;
- /* Small-page NAND use byte 6 for BBI */
- if (cfg->page_size == 512)
- layout->oobfree[idx2].offset--;
- layout->oobfree[idx2].length = 5;
- } else {
- layout->oobfree[idx2].offset = i * sas;
- layout->oobfree[idx2].length = 6;
- }
- idx2++;
- layout->eccpos[idx1++] = i * sas + 6;
- layout->eccpos[idx1++] = i * sas + 7;
- layout->eccpos[idx1++] = i * sas + 8;
- layout->oobfree[idx2].offset = i * sas + 9;
- layout->oobfree[idx2].length = 7;
- idx2++;
- /* Leave zero-terminated entry for OOBFREE */
- if (idx1 >= MTD_MAX_ECCPOS_ENTRIES_LARGE ||
- idx2 >= MTD_MAX_OOBFREE_ENTRIES_LARGE - 1)
- break;
- }
+ int sas = cfg->spare_area_size << cfg->sector_size_1k;
+ int sectors = cfg->page_size / (512 << cfg->sector_size_1k);
- return layout;
- }
+ if (section >= sectors)
+ return -ERANGE;
- /*
- * CONTROLLER_VERSION:
- * < v5.0: ECC_REQ = ceil(BCH_T * 13/8)
- * >= v5.0: ECC_REQ = ceil(BCH_T * 14/8)
- * But we will just be conservative.
- */
- req = DIV_ROUND_UP(ecc_level * 14, 8);
- if (req >= sas) {
- dev_err(&host->pdev->dev,
- "error: ECC too large for OOB (ECC bytes %d, spare sector %d)\n",
- req, sas);
- return NULL;
- }
+ oobregion->offset = (section * sas) + 6;
+ oobregion->length = 3;
+
+ return 0;
+}
+
+static int brcmnand_hamming_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct brcmnand_host *host = nand_get_controller_data(chip);
+ struct brcmnand_cfg *cfg = &host->hwcfg;
+ int sas = cfg->spare_area_size << cfg->sector_size_1k;
+ int sectors = cfg->page_size / (512 << cfg->sector_size_1k);
- layout->eccbytes = req * sectors;
- for (i = 0, idx1 = 0, idx2 = 0; i < sectors; i++) {
- for (j = sas - req; j < sas && idx1 <
- MTD_MAX_ECCPOS_ENTRIES_LARGE; j++, idx1++)
- layout->eccpos[idx1] = i * sas + j;
+ if (section >= sectors * 2)
+ return -ERANGE;
+
+ oobregion->offset = (section / 2) * sas;
+
+ if (section & 1) {
+ oobregion->offset += 9;
+ oobregion->length = 7;
+ } else {
+ oobregion->length = 6;
/* First sector of each page may have BBI */
- if (i == 0) {
- if (cfg->page_size == 512 && (sas - req >= 6)) {
- /* Small-page NAND use byte 6 for BBI */
- layout->oobfree[idx2].offset = 0;
- layout->oobfree[idx2].length = 5;
- idx2++;
- if (sas - req > 6) {
- layout->oobfree[idx2].offset = 6;
- layout->oobfree[idx2].length =
- sas - req - 6;
- idx2++;
- }
- } else if (sas > req + 1) {
- layout->oobfree[idx2].offset = i * sas + 1;
- layout->oobfree[idx2].length = sas - req - 1;
- idx2++;
- }
- } else if (sas > req) {
- layout->oobfree[idx2].offset = i * sas;
- layout->oobfree[idx2].length = sas - req;
- idx2++;
+ if (!section) {
+ /*
+ * Small-page NAND use byte 6 for BBI while large-page
+ * NAND use byte 0.
+ */
+ if (cfg->page_size > 512)
+ oobregion->offset++;
+ oobregion->length--;
}
- /* Leave zero-terminated entry for OOBFREE */
- if (idx1 >= MTD_MAX_ECCPOS_ENTRIES_LARGE ||
- idx2 >= MTD_MAX_OOBFREE_ENTRIES_LARGE - 1)
- break;
}
- return layout;
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops brcmnand_hamming_ooblayout_ops = {
+ .ecc = brcmnand_hamming_ooblayout_ecc,
+ .free = brcmnand_hamming_ooblayout_free,
+};
+
+static int brcmnand_bch_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct brcmnand_host *host = nand_get_controller_data(chip);
+ struct brcmnand_cfg *cfg = &host->hwcfg;
+ int sas = cfg->spare_area_size << cfg->sector_size_1k;
+ int sectors = cfg->page_size / (512 << cfg->sector_size_1k);
+
+ if (section >= sectors)
+ return -ERANGE;
+
+ oobregion->offset = (section * (sas + 1)) - chip->ecc.bytes;
+ oobregion->length = chip->ecc.bytes;
+
+ return 0;
+}
+
+static int brcmnand_bch_ooblayout_free_lp(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct brcmnand_host *host = nand_get_controller_data(chip);
+ struct brcmnand_cfg *cfg = &host->hwcfg;
+ int sas = cfg->spare_area_size << cfg->sector_size_1k;
+ int sectors = cfg->page_size / (512 << cfg->sector_size_1k);
+
+ if (section >= sectors)
+ return -ERANGE;
+
+ if (sas <= chip->ecc.bytes)
+ return 0;
+
+ oobregion->offset = section * sas;
+ oobregion->length = sas - chip->ecc.bytes;
+
+ if (!section) {
+ oobregion->offset++;
+ oobregion->length--;
+ }
+
+ return 0;
}
-static struct nand_ecclayout *brcmstb_choose_ecc_layout(
- struct brcmnand_host *host)
+static int brcmnand_bch_ooblayout_free_sp(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct brcmnand_host *host = nand_get_controller_data(chip);
+ struct brcmnand_cfg *cfg = &host->hwcfg;
+ int sas = cfg->spare_area_size << cfg->sector_size_1k;
+
+ if (section > 1 || sas - chip->ecc.bytes < 6 ||
+ (section && sas - chip->ecc.bytes == 6))
+ return -ERANGE;
+
+ if (!section) {
+ oobregion->offset = 0;
+ oobregion->length = 5;
+ } else {
+ oobregion->offset = 6;
+ oobregion->length = sas - chip->ecc.bytes - 6;
+ }
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops brcmnand_bch_lp_ooblayout_ops = {
+ .ecc = brcmnand_bch_ooblayout_ecc,
+ .free = brcmnand_bch_ooblayout_free_lp,
+};
+
+static const struct mtd_ooblayout_ops brcmnand_bch_sp_ooblayout_ops = {
+ .ecc = brcmnand_bch_ooblayout_ecc,
+ .free = brcmnand_bch_ooblayout_free_sp,
+};
+
+static int brcmstb_choose_ecc_layout(struct brcmnand_host *host)
{
- struct nand_ecclayout *layout;
struct brcmnand_cfg *p = &host->hwcfg;
+ struct mtd_info *mtd = nand_to_mtd(&host->chip);
+ struct nand_ecc_ctrl *ecc = &host->chip.ecc;
unsigned int ecc_level = p->ecc_level;
+ int sas = p->spare_area_size << p->sector_size_1k;
+ int sectors = p->page_size / (512 << p->sector_size_1k);
if (p->sector_size_1k)
ecc_level <<= 1;
- layout = brcmnand_create_layout(ecc_level, host);
- if (!layout) {
+ if (is_hamming_ecc(p)) {
+ ecc->bytes = 3 * sectors;
+ mtd_set_ooblayout(mtd, &brcmnand_hamming_ooblayout_ops);
+ return 0;
+ }
+
+ /*
+ * CONTROLLER_VERSION:
+ * < v5.0: ECC_REQ = ceil(BCH_T * 13/8)
+ * >= v5.0: ECC_REQ = ceil(BCH_T * 14/8)
+ * But we will just be conservative.
+ */
+ ecc->bytes = DIV_ROUND_UP(ecc_level * 14, 8);
+ if (p->page_size == 512)
+ mtd_set_ooblayout(mtd, &brcmnand_bch_sp_ooblayout_ops);
+ else
+ mtd_set_ooblayout(mtd, &brcmnand_bch_lp_ooblayout_ops);
+
+ if (ecc->bytes >= sas) {
dev_err(&host->pdev->dev,
- "no proper ecc_layout for this NAND cfg\n");
- return NULL;
+ "error: ECC too large for OOB (ECC bytes %d, spare sector %d)\n",
+ ecc->bytes, sas);
+ return -EINVAL;
}
- return layout;
+ return 0;
}
static void brcmnand_wp(struct mtd_info *mtd, int wp)
@@ -1870,9 +1925,31 @@ static int brcmnand_setup_dev(struct brcmnand_host *host)
cfg->col_adr_bytes = 2;
cfg->blk_adr_bytes = get_blk_adr_bytes(mtd->size, mtd->writesize);
+ if (chip->ecc.mode != NAND_ECC_HW) {
+ dev_err(ctrl->dev, "only HW ECC supported; selected: %d\n",
+ chip->ecc.mode);
+ return -EINVAL;
+ }
+
+ if (chip->ecc.algo == NAND_ECC_UNKNOWN) {
+ if (chip->ecc.strength == 1 && chip->ecc.size == 512)
+ /* Default to Hamming for 1-bit ECC, if unspecified */
+ chip->ecc.algo = NAND_ECC_HAMMING;
+ else
+ /* Otherwise, BCH */
+ chip->ecc.algo = NAND_ECC_BCH;
+ }
+
+ if (chip->ecc.algo == NAND_ECC_HAMMING && (chip->ecc.strength != 1 ||
+ chip->ecc.size != 512)) {
+ dev_err(ctrl->dev, "invalid Hamming params: %d bits per %d bytes\n",
+ chip->ecc.strength, chip->ecc.size);
+ return -EINVAL;
+ }
+
switch (chip->ecc.size) {
case 512:
- if (chip->ecc.strength == 1) /* Hamming */
+ if (chip->ecc.algo == NAND_ECC_HAMMING)
cfg->ecc_level = 15;
else
cfg->ecc_level = chip->ecc.strength;
@@ -2001,8 +2078,8 @@ static int brcmnand_init_cs(struct brcmnand_host *host, struct device_node *dn)
*/
chip->options |= NAND_USE_BOUNCE_BUFFER;
- if (of_get_nand_on_flash_bbt(dn))
- chip->bbt_options |= NAND_BBT_USE_FLASH | NAND_BBT_NO_OOB;
+ if (chip->bbt_options & NAND_BBT_USE_FLASH)
+ chip->bbt_options |= NAND_BBT_NO_OOB;
if (brcmnand_setup_dev(host))
return -ENXIO;
@@ -2011,9 +2088,9 @@ static int brcmnand_init_cs(struct brcmnand_host *host, struct device_node *dn)
/* only use our internal HW threshold */
mtd->bitflip_threshold = 1;
- chip->ecc.layout = brcmstb_choose_ecc_layout(host);
- if (!chip->ecc.layout)
- return -ENXIO;
+ ret = brcmstb_choose_ecc_layout(host);
+ if (ret)
+ return ret;
if (nand_scan_tail(mtd))
return -ENXIO;
@@ -2115,6 +2192,7 @@ static const struct of_device_id brcmnand_of_match[] = {
{ .compatible = "brcm,brcmnand-v5.0" },
{ .compatible = "brcm,brcmnand-v6.0" },
{ .compatible = "brcm,brcmnand-v6.1" },
+ { .compatible = "brcm,brcmnand-v6.2" },
{ .compatible = "brcm,brcmnand-v7.0" },
{ .compatible = "brcm,brcmnand-v7.1" },
{},
diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c
index e553aff68987..0b0c93702abb 100644
--- a/drivers/mtd/nand/cafe_nand.c
+++ b/drivers/mtd/nand/cafe_nand.c
@@ -459,10 +459,37 @@ static int cafe_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip,
return max_bitflips;
}
-static struct nand_ecclayout cafe_oobinfo_2048 = {
- .eccbytes = 14,
- .eccpos = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13},
- .oobfree = {{14, 50}}
+static int cafe_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+
+ if (section)
+ return -ERANGE;
+
+ oobregion->offset = 0;
+ oobregion->length = chip->ecc.total;
+
+ return 0;
+}
+
+static int cafe_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+
+ if (section)
+ return -ERANGE;
+
+ oobregion->offset = chip->ecc.total;
+ oobregion->length = mtd->oobsize - chip->ecc.total;
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops cafe_ooblayout_ops = {
+ .ecc = cafe_ooblayout_ecc,
+ .free = cafe_ooblayout_free,
};
/* Ick. The BBT code really ought to be able to work this bit out
@@ -494,12 +521,6 @@ static struct nand_bbt_descr cafe_bbt_mirror_descr_2048 = {
.pattern = cafe_mirror_pattern_2048
};
-static struct nand_ecclayout cafe_oobinfo_512 = {
- .eccbytes = 14,
- .eccpos = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13},
- .oobfree = {{14, 2}}
-};
-
static struct nand_bbt_descr cafe_bbt_main_descr_512 = {
.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
| NAND_BBT_2BIT | NAND_BBT_VERSION,
@@ -743,12 +764,11 @@ static int cafe_nand_probe(struct pci_dev *pdev,
cafe->ctl2 |= 1<<29; /* 2KiB page size */
/* Set up ECC according to the type of chip we found */
+ mtd_set_ooblayout(mtd, &cafe_ooblayout_ops);
if (mtd->writesize == 2048) {
- cafe->nand.ecc.layout = &cafe_oobinfo_2048;
cafe->nand.bbt_td = &cafe_bbt_main_descr_2048;
cafe->nand.bbt_md = &cafe_bbt_mirror_descr_2048;
} else if (mtd->writesize == 512) {
- cafe->nand.ecc.layout = &cafe_oobinfo_512;
cafe->nand.bbt_td = &cafe_bbt_main_descr_512;
cafe->nand.bbt_md = &cafe_bbt_mirror_descr_512;
} else {
diff --git a/drivers/mtd/nand/cmx270_nand.c b/drivers/mtd/nand/cmx270_nand.c
index 6f97ebba52c4..49133783ca53 100644
--- a/drivers/mtd/nand/cmx270_nand.c
+++ b/drivers/mtd/nand/cmx270_nand.c
@@ -187,6 +187,7 @@ static int __init cmx270_init(void)
/* 15 us command delay time */
this->chip_delay = 20;
this->ecc.mode = NAND_ECC_SOFT;
+ this->ecc.algo = NAND_ECC_HAMMING;
/* read/write functions */
this->read_byte = cmx270_read_byte;
diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index 8cb821b6686e..cc07ba0f044d 100644
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -34,7 +34,6 @@
#include <linux/slab.h>
#include <linux/of_device.h>
#include <linux/of.h>
-#include <linux/of_mtd.h>
#include <linux/platform_data/mtd-davinci.h>
#include <linux/platform_data/mtd-davinci-aemif.h>
@@ -54,7 +53,6 @@
*/
struct davinci_nand_info {
struct nand_chip chip;
- struct nand_ecclayout ecclayout;
struct device *dev;
struct clk *clk;
@@ -480,63 +478,46 @@ static int nand_davinci_dev_ready(struct mtd_info *mtd)
* ten ECC bytes plus the manufacturer's bad block marker byte, and
* and not overlapping the default BBT markers.
*/
-static struct nand_ecclayout hwecc4_small = {
- .eccbytes = 10,
- .eccpos = { 0, 1, 2, 3, 4,
- /* offset 5 holds the badblock marker */
- 6, 7,
- 13, 14, 15, },
- .oobfree = {
- {.offset = 8, .length = 5, },
- {.offset = 16, },
- },
-};
+static int hwecc4_ooblayout_small_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section > 2)
+ return -ERANGE;
+
+ if (!section) {
+ oobregion->offset = 0;
+ oobregion->length = 5;
+ } else if (section == 1) {
+ oobregion->offset = 6;
+ oobregion->length = 2;
+ } else {
+ oobregion->offset = 13;
+ oobregion->length = 3;
+ }
-/* An ECC layout for using 4-bit ECC with large-page (2048bytes) flash,
- * storing ten ECC bytes plus the manufacturer's bad block marker byte,
- * and not overlapping the default BBT markers.
- */
-static struct nand_ecclayout hwecc4_2048 = {
- .eccbytes = 40,
- .eccpos = {
- /* at the end of spare sector */
- 24, 25, 26, 27, 28, 29, 30, 31, 32, 33,
- 34, 35, 36, 37, 38, 39, 40, 41, 42, 43,
- 44, 45, 46, 47, 48, 49, 50, 51, 52, 53,
- 54, 55, 56, 57, 58, 59, 60, 61, 62, 63,
- },
- .oobfree = {
- /* 2 bytes at offset 0 hold manufacturer badblock markers */
- {.offset = 2, .length = 22, },
- /* 5 bytes at offset 8 hold BBT markers */
- /* 8 bytes at offset 16 hold JFFS2 clean markers */
- },
-};
+ return 0;
+}
-/*
- * An ECC layout for using 4-bit ECC with large-page (4096bytes) flash,
- * storing ten ECC bytes plus the manufacturer's bad block marker byte,
- * and not overlapping the default BBT markers.
- */
-static struct nand_ecclayout hwecc4_4096 = {
- .eccbytes = 80,
- .eccpos = {
- /* at the end of spare sector */
- 48, 49, 50, 51, 52, 53, 54, 55, 56, 57,
- 58, 59, 60, 61, 62, 63, 64, 65, 66, 67,
- 68, 69, 70, 71, 72, 73, 74, 75, 76, 77,
- 78, 79, 80, 81, 82, 83, 84, 85, 86, 87,
- 88, 89, 90, 91, 92, 93, 94, 95, 96, 97,
- 98, 99, 100, 101, 102, 103, 104, 105, 106, 107,
- 108, 109, 110, 111, 112, 113, 114, 115, 116, 117,
- 118, 119, 120, 121, 122, 123, 124, 125, 126, 127,
- },
- .oobfree = {
- /* 2 bytes at offset 0 hold manufacturer badblock markers */
- {.offset = 2, .length = 46, },
- /* 5 bytes at offset 8 hold BBT markers */
- /* 8 bytes at offset 16 hold JFFS2 clean markers */
- },
+static int hwecc4_ooblayout_small_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section > 1)
+ return -ERANGE;
+
+ if (!section) {
+ oobregion->offset = 8;
+ oobregion->length = 5;
+ } else {
+ oobregion->offset = 16;
+ oobregion->length = mtd->oobsize - 16;
+ }
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops hwecc4_small_ooblayout_ops = {
+ .ecc = hwecc4_ooblayout_small_ecc,
+ .free = hwecc4_ooblayout_small_free,
};
#if defined(CONFIG_OF)
@@ -577,8 +558,6 @@ static struct davinci_nand_pdata
"ti,davinci-mask-chipsel", &prop))
pdata->mask_chipsel = prop;
if (!of_property_read_string(pdev->dev.of_node,
- "nand-ecc-mode", &mode) ||
- !of_property_read_string(pdev->dev.of_node,
"ti,davinci-ecc-mode", &mode)) {
if (!strncmp("none", mode, 4))
pdata->ecc_mode = NAND_ECC_NONE;
@@ -591,14 +570,11 @@ static struct davinci_nand_pdata
"ti,davinci-ecc-bits", &prop))
pdata->ecc_bits = prop;
- prop = of_get_nand_bus_width(pdev->dev.of_node);
- if (0 < prop || !of_property_read_u32(pdev->dev.of_node,
- "ti,davinci-nand-buswidth", &prop))
- if (prop == 16)
- pdata->options |= NAND_BUSWIDTH_16;
+ if (!of_property_read_u32(pdev->dev.of_node,
+ "ti,davinci-nand-buswidth", &prop) && prop == 16)
+ pdata->options |= NAND_BUSWIDTH_16;
+
if (of_property_read_bool(pdev->dev.of_node,
- "nand-on-flash-bbt") ||
- of_property_read_bool(pdev->dev.of_node,
"ti,davinci-nand-use-bbt"))
pdata->bbt_options = NAND_BBT_USE_FLASH;
@@ -628,7 +604,6 @@ static int nand_davinci_probe(struct platform_device *pdev)
void __iomem *base;
int ret;
uint32_t val;
- nand_ecc_modes_t ecc_mode;
struct mtd_info *mtd;
pdata = nand_davinci_get_pdata(pdev);
@@ -712,13 +687,53 @@ static int nand_davinci_probe(struct platform_device *pdev)
info->chip.write_buf = nand_davinci_write_buf;
/* Use board-specific ECC config */
- ecc_mode = pdata->ecc_mode;
+ info->chip.ecc.mode = pdata->ecc_mode;
ret = -EINVAL;
- switch (ecc_mode) {
+
+ info->clk = devm_clk_get(&pdev->dev, "aemif");
+ if (IS_ERR(info->clk)) {
+ ret = PTR_ERR(info->clk);
+ dev_dbg(&pdev->dev, "unable to get AEMIF clock, err %d\n", ret);
+ return ret;
+ }
+
+ ret = clk_prepare_enable(info->clk);
+ if (ret < 0) {
+ dev_dbg(&pdev->dev, "unable to enable AEMIF clock, err %d\n",
+ ret);
+ goto err_clk_enable;
+ }
+
+ spin_lock_irq(&davinci_nand_lock);
+
+ /* put CSxNAND into NAND mode */
+ val = davinci_nand_readl(info, NANDFCR_OFFSET);
+ val |= BIT(info->core_chipsel);
+ davinci_nand_writel(info, NANDFCR_OFFSET, val);
+
+ spin_unlock_irq(&davinci_nand_lock);
+
+ /* Scan to find existence of the device(s) */
+ ret = nand_scan_ident(mtd, pdata->mask_chipsel ? 2 : 1, NULL);
+ if (ret < 0) {
+ dev_dbg(&pdev->dev, "no NAND chip(s) found\n");
+ goto err;
+ }
+
+ switch (info->chip.ecc.mode) {
case NAND_ECC_NONE:
+ pdata->ecc_bits = 0;
+ break;
case NAND_ECC_SOFT:
pdata->ecc_bits = 0;
+ /*
+ * This driver expects Hamming based ECC when ecc_mode is set
+ * to NAND_ECC_SOFT. Force ecc.algo to NAND_ECC_HAMMING to
+ * avoid adding an extra ->ecc_algo field to
+ * davinci_nand_pdata.
+ */
+ info->chip.ecc.algo = NAND_ECC_HAMMING;
break;
case NAND_ECC_HW:
if (pdata->ecc_bits == 4) {
@@ -754,37 +769,6 @@ static int nand_davinci_probe(struct platform_device *pdev)
default:
return -EINVAL;
}
- info->chip.ecc.mode = ecc_mode;
-
- info->clk = devm_clk_get(&pdev->dev, "aemif");
- if (IS_ERR(info->clk)) {
- ret = PTR_ERR(info->clk);
- dev_dbg(&pdev->dev, "unable to get AEMIF clock, err %d\n", ret);
- return ret;
- }
-
- ret = clk_prepare_enable(info->clk);
- if (ret < 0) {
- dev_dbg(&pdev->dev, "unable to enable AEMIF clock, err %d\n",
- ret);
- goto err_clk_enable;
- }
-
- spin_lock_irq(&davinci_nand_lock);
-
- /* put CSxNAND into NAND mode */
- val = davinci_nand_readl(info, NANDFCR_OFFSET);
- val |= BIT(info->core_chipsel);
- davinci_nand_writel(info, NANDFCR_OFFSET, val);
-
- spin_unlock_irq(&davinci_nand_lock);
-
- /* Scan to find existence of the device(s) */
- ret = nand_scan_ident(mtd, pdata->mask_chipsel ? 2 : 1, NULL);
- if (ret < 0) {
- dev_dbg(&pdev->dev, "no NAND chip(s) found\n");
- goto err;
- }
/* Update ECC layout if needed ... for 1-bit HW ECC, the default
* is OK, but it allocates 6 bytes when only 3 are needed (for
@@ -805,26 +789,14 @@ static int nand_davinci_probe(struct platform_device *pdev)
* table marker fits in the free bytes.
*/
if (chunks == 1) {
- info->ecclayout = hwecc4_small;
- info->ecclayout.oobfree[1].length = mtd->oobsize - 16;
- goto syndrome_done;
- }
- if (chunks == 4) {
- info->ecclayout = hwecc4_2048;
- info->chip.ecc.mode = NAND_ECC_HW_OOB_FIRST;
- goto syndrome_done;
- }
- if (chunks == 8) {
- info->ecclayout = hwecc4_4096;
+ mtd_set_ooblayout(mtd, &hwecc4_small_ooblayout_ops);
+ } else if (chunks == 4 || chunks == 8) {
+ mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
info->chip.ecc.mode = NAND_ECC_HW_OOB_FIRST;
- goto syndrome_done;
+ } else {
+ ret = -EIO;
+ goto err;
}
-
- ret = -EIO;
- goto err;
-
-syndrome_done:
- info->chip.ecc.layout = &info->ecclayout;
}
ret = nand_scan_tail(mtd);
@@ -850,7 +822,7 @@ err:
err_clk_enable:
spin_lock_irq(&davinci_nand_lock);
- if (ecc_mode == NAND_ECC_HW_SYNDROME)
+ if (info->chip.ecc.mode == NAND_ECC_HW_SYNDROME)
ecc4_busy = false;
spin_unlock_irq(&davinci_nand_lock);
return ret;
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index 30bf5f690f78..0476ae8776d9 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -1374,13 +1374,41 @@ static void denali_hw_init(struct denali_nand_info *denali)
* correction
*/
#define ECC_8BITS 14
-static struct nand_ecclayout nand_8bit_oob = {
- .eccbytes = 14,
-};
-
#define ECC_15BITS 26
-static struct nand_ecclayout nand_15bit_oob = {
- .eccbytes = 26,
+
+static int denali_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct denali_nand_info *denali = mtd_to_denali(mtd);
+ struct nand_chip *chip = mtd_to_nand(mtd);
+
+ if (section)
+ return -ERANGE;
+
+ oobregion->offset = denali->bbtskipbytes;
+ oobregion->length = chip->ecc.total;
+
+ return 0;
+}
+
+static int denali_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct denali_nand_info *denali = mtd_to_denali(mtd);
+ struct nand_chip *chip = mtd_to_nand(mtd);
+
+ if (section)
+ return -ERANGE;
+
+ oobregion->offset = chip->ecc.total + denali->bbtskipbytes;
+ oobregion->length = mtd->oobsize - oobregion->offset;
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops denali_ooblayout_ops = {
+ .ecc = denali_ooblayout_ecc,
+ .free = denali_ooblayout_free,
};
static uint8_t bbt_pattern[] = {'B', 'b', 't', '0' };
@@ -1561,7 +1589,6 @@ int denali_init(struct denali_nand_info *denali)
ECC_SECTOR_SIZE)))) {
/* if MLC OOB size is large enough, use 15bit ECC*/
denali->nand.ecc.strength = 15;
- denali->nand.ecc.layout = &nand_15bit_oob;
denali->nand.ecc.bytes = ECC_15BITS;
iowrite32(15, denali->flash_reg + ECC_CORRECTION);
} else if (mtd->oobsize < (denali->bbtskipbytes +
@@ -1571,20 +1598,13 @@ int denali_init(struct denali_nand_info *denali)
goto failed_req_irq;
} else {
denali->nand.ecc.strength = 8;
- denali->nand.ecc.layout = &nand_8bit_oob;
denali->nand.ecc.bytes = ECC_8BITS;
iowrite32(8, denali->flash_reg + ECC_CORRECTION);
}
+ mtd_set_ooblayout(mtd, &denali_ooblayout_ops);
denali->nand.ecc.bytes *= denali->devnum;
denali->nand.ecc.strength *= denali->devnum;
- denali->nand.ecc.layout->eccbytes *=
- mtd->writesize / ECC_SECTOR_SIZE;
- denali->nand.ecc.layout->oobfree[0].offset =
- denali->bbtskipbytes + denali->nand.ecc.layout->eccbytes;
- denali->nand.ecc.layout->oobfree[0].length =
- mtd->oobsize - denali->nand.ecc.layout->eccbytes -
- denali->bbtskipbytes;
/*
* Let driver know the total blocks number and how many blocks
diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c
index 547c1002941d..a023ab9e9cbf 100644
--- a/drivers/mtd/nand/diskonchip.c
+++ b/drivers/mtd/nand/diskonchip.c
@@ -950,20 +950,50 @@ static int doc200x_correct_data(struct mtd_info *mtd, u_char *dat,
//u_char mydatabuf[528];
-/* The strange out-of-order .oobfree list below is a (possibly unneeded)
- * attempt to retain compatibility. It used to read:
- * .oobfree = { {8, 8} }
- * Since that leaves two bytes unusable, it was changed. But the following
- * scheme might affect existing jffs2 installs by moving the cleanmarker:
- * .oobfree = { {6, 10} }
- * jffs2 seems to handle the above gracefully, but the current scheme seems
- * safer. The only problem with it is that any code that parses oobfree must
- * be able to handle out-of-order segments.
- */
-static struct nand_ecclayout doc200x_oobinfo = {
- .eccbytes = 6,
- .eccpos = {0, 1, 2, 3, 4, 5},
- .oobfree = {{8, 8}, {6, 2}}
+static int doc200x_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section)
+ return -ERANGE;
+
+ oobregion->offset = 0;
+ oobregion->length = 6;
+
+ return 0;
+}
+
+static int doc200x_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section > 1)
+ return -ERANGE;
+
+ /*
+ * The strange out-of-order free bytes definition is a (possibly
+ * unneeded) attempt to retain compatibility. It used to read:
+ * .oobfree = { {8, 8} }
+ * Since that leaves two bytes unusable, it was changed. But the
+ * following scheme might affect existing jffs2 installs by moving the
+ * cleanmarker:
+ * .oobfree = { {6, 10} }
+ * jffs2 seems to handle the above gracefully, but the current scheme
+ * seems safer. The only problem with it is that any code retrieving
+ * free bytes position must be able to handle out-of-order segments.
+ */
+ if (!section) {
+ oobregion->offset = 8;
+ oobregion->length = 8;
+ } else {
+ oobregion->offset = 6;
+ oobregion->length = 2;
+ }
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops doc200x_ooblayout_ops = {
+ .ecc = doc200x_ooblayout_ecc,
+ .free = doc200x_ooblayout_free,
};
/* Find the (I)NFTL Media Header, and optionally also the mirror media header.
@@ -1537,6 +1567,7 @@ static int __init doc_probe(unsigned long physadr)
nand->bbt_md = nand->bbt_td + 1;
mtd->owner = THIS_MODULE;
+ mtd_set_ooblayout(mtd, &doc200x_ooblayout_ops);
nand_set_controller_data(nand, doc);
nand->select_chip = doc200x_select_chip;
@@ -1548,7 +1579,6 @@ static int __init doc_probe(unsigned long physadr)
nand->ecc.calculate = doc200x_calculate_ecc;
nand->ecc.correct = doc200x_correct_data;
- nand->ecc.layout = &doc200x_oobinfo;
nand->ecc.mode = NAND_ECC_HW_SYNDROME;
nand->ecc.size = 512;
nand->ecc.bytes = 6;
diff --git a/drivers/mtd/nand/docg4.c b/drivers/mtd/nand/docg4.c
index d86a60e1bbcb..47316998017f 100644
--- a/drivers/mtd/nand/docg4.c
+++ b/drivers/mtd/nand/docg4.c
@@ -222,10 +222,33 @@ struct docg4_priv {
* Bytes 8 - 14 are hw-generated ecc covering entire page + oob bytes 0 - 14.
* Byte 15 (the last) is used by the driver as a "page written" flag.
*/
-static struct nand_ecclayout docg4_oobinfo = {
- .eccbytes = 9,
- .eccpos = {7, 8, 9, 10, 11, 12, 13, 14, 15},
- .oobfree = { {.offset = 2, .length = 5} }
+static int docg4_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section)
+ return -ERANGE;
+
+ oobregion->offset = 7;
+ oobregion->length = 9;
+
+ return 0;
+}
+
+static int docg4_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section)
+ return -ERANGE;
+
+ oobregion->offset = 2;
+ oobregion->length = 5;
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops docg4_ooblayout_ops = {
+ .ecc = docg4_ooblayout_ecc,
+ .free = docg4_ooblayout_free,
};
/*
@@ -1209,6 +1232,7 @@ static void __init init_mtd_structs(struct mtd_info *mtd)
mtd->writesize = DOCG4_PAGE_SIZE;
mtd->erasesize = DOCG4_BLOCK_SIZE;
mtd->oobsize = DOCG4_OOB_SIZE;
+ mtd_set_ooblayout(mtd, &docg4_ooblayout_ops);
nand->chipsize = DOCG4_CHIP_SIZE;
nand->chip_shift = DOCG4_CHIP_SHIFT;
nand->bbt_erase_shift = nand->phys_erase_shift = DOCG4_ERASE_SHIFT;
@@ -1217,7 +1241,6 @@ static void __init init_mtd_structs(struct mtd_info *mtd)
nand->pagemask = 0x3ffff;
nand->badblockpos = NAND_LARGE_BADBLOCK_POS;
nand->badblockbits = 8;
- nand->ecc.layout = &docg4_oobinfo;
nand->ecc.mode = NAND_ECC_HW_SYNDROME;
nand->ecc.size = DOCG4_PAGE_SIZE;
nand->ecc.prepad = 8;
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 059d5f7ec124..60a88f24c6b3 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -79,32 +79,53 @@ struct fsl_elbc_fcm_ctrl {
/* These map to the positions used by the FCM hardware ECC generator */
-/* Small Page FLASH with FMR[ECCM] = 0 */
-static struct nand_ecclayout fsl_elbc_oob_sp_eccm0 = {
- .eccbytes = 3,
- .eccpos = {6, 7, 8},
- .oobfree = { {0, 5}, {9, 7} },
-};
+static int fsl_elbc_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct fsl_elbc_mtd *priv = nand_get_controller_data(chip);
-/* Small Page FLASH with FMR[ECCM] = 1 */
-static struct nand_ecclayout fsl_elbc_oob_sp_eccm1 = {
- .eccbytes = 3,
- .eccpos = {8, 9, 10},
- .oobfree = { {0, 5}, {6, 2}, {11, 5} },
-};
+ if (section >= chip->ecc.steps)
+ return -ERANGE;
-/* Large Page FLASH with FMR[ECCM] = 0 */
-static struct nand_ecclayout fsl_elbc_oob_lp_eccm0 = {
- .eccbytes = 12,
- .eccpos = {6, 7, 8, 22, 23, 24, 38, 39, 40, 54, 55, 56},
- .oobfree = { {1, 5}, {9, 13}, {25, 13}, {41, 13}, {57, 7} },
-};
+ oobregion->offset = (16 * section) + 6;
+ if (priv->fmr & FMR_ECCM)
+ oobregion->offset += 2;
-/* Large Page FLASH with FMR[ECCM] = 1 */
-static struct nand_ecclayout fsl_elbc_oob_lp_eccm1 = {
- .eccbytes = 12,
- .eccpos = {8, 9, 10, 24, 25, 26, 40, 41, 42, 56, 57, 58},
- .oobfree = { {1, 7}, {11, 13}, {27, 13}, {43, 13}, {59, 5} },
+ oobregion->length = chip->ecc.bytes;
+
+ return 0;
+}
+
+static int fsl_elbc_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct fsl_elbc_mtd *priv = nand_get_controller_data(chip);
+
+ if (section > chip->ecc.steps)
+ return -ERANGE;
+
+ if (!section) {
+ oobregion->offset = 0;
+ if (mtd->writesize > 512)
+ oobregion->offset++;
+ oobregion->length = (priv->fmr & FMR_ECCM) ? 7 : 5;
+ } else {
+ oobregion->offset = (16 * section) -
+ ((priv->fmr & FMR_ECCM) ? 5 : 7);
+ if (section < chip->ecc.steps)
+ oobregion->length = 13;
+ else
+ oobregion->length = mtd->oobsize - oobregion->offset;
+ }
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops fsl_elbc_ooblayout_ops = {
+ .ecc = fsl_elbc_ooblayout_ecc,
+ .free = fsl_elbc_ooblayout_free,
};
/*
@@ -657,8 +678,8 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd)
chip->ecc.bytes);
dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.total = %d\n",
chip->ecc.total);
- dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.layout = %p\n",
- chip->ecc.layout);
+ dev_dbg(priv->dev, "fsl_elbc_init: mtd->ooblayout = %p\n",
+ mtd->ooblayout);
dev_dbg(priv->dev, "fsl_elbc_init: mtd->flags = %08x\n", mtd->flags);
dev_dbg(priv->dev, "fsl_elbc_init: mtd->size = %lld\n", mtd->size);
dev_dbg(priv->dev, "fsl_elbc_init: mtd->erasesize = %d\n",
@@ -675,14 +696,6 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd)
} else if (mtd->writesize == 2048) {
priv->page_size = 1;
setbits32(&lbc->bank[priv->bank].or, OR_FCM_PGS);
- /* adjust ecc setup if needed */
- if ((in_be32(&lbc->bank[priv->bank].br) & BR_DECC) ==
- BR_DECC_CHK_GEN) {
- chip->ecc.size = 512;
- chip->ecc.layout = (priv->fmr & FMR_ECCM) ?
- &fsl_elbc_oob_lp_eccm1 :
- &fsl_elbc_oob_lp_eccm0;
- }
} else {
dev_err(priv->dev,
"fsl_elbc_init: page size %d is not supported\n",
@@ -780,15 +793,14 @@ static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv)
if ((in_be32(&lbc->bank[priv->bank].br) & BR_DECC) ==
BR_DECC_CHK_GEN) {
chip->ecc.mode = NAND_ECC_HW;
- /* put in small page settings and adjust later if needed */
- chip->ecc.layout = (priv->fmr & FMR_ECCM) ?
- &fsl_elbc_oob_sp_eccm1 : &fsl_elbc_oob_sp_eccm0;
+ mtd_set_ooblayout(mtd, &fsl_elbc_ooblayout_ops);
chip->ecc.size = 512;
chip->ecc.bytes = 3;
chip->ecc.strength = 1;
} else {
/* otherwise fall back to default software ECC */
chip->ecc.mode = NAND_ECC_SOFT;
+ chip->ecc.algo = NAND_ECC_HAMMING;
}
return 0;
diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c
index 43f5a3a4873f..4e9e5fd8faf3 100644
--- a/drivers/mtd/nand/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/fsl_ifc_nand.c
@@ -67,136 +67,6 @@ struct fsl_ifc_nand_ctrl {
static struct fsl_ifc_nand_ctrl *ifc_nand_ctrl;
-/* 512-byte page with 4-bit ECC, 8-bit */
-static struct nand_ecclayout oob_512_8bit_ecc4 = {
- .eccbytes = 8,
- .eccpos = {8, 9, 10, 11, 12, 13, 14, 15},
- .oobfree = { {0, 5}, {6, 2} },
-};
-
-/* 512-byte page with 4-bit ECC, 16-bit */
-static struct nand_ecclayout oob_512_16bit_ecc4 = {
- .eccbytes = 8,
- .eccpos = {8, 9, 10, 11, 12, 13, 14, 15},
- .oobfree = { {2, 6}, },
-};
-
-/* 2048-byte page size with 4-bit ECC */
-static struct nand_ecclayout oob_2048_ecc4 = {
- .eccbytes = 32,
- .eccpos = {
- 8, 9, 10, 11, 12, 13, 14, 15,
- 16, 17, 18, 19, 20, 21, 22, 23,
- 24, 25, 26, 27, 28, 29, 30, 31,
- 32, 33, 34, 35, 36, 37, 38, 39,
- },
- .oobfree = { {2, 6}, {40, 24} },
-};
-
-/* 4096-byte page size with 4-bit ECC */
-static struct nand_ecclayout oob_4096_ecc4 = {
- .eccbytes = 64,
- .eccpos = {
- 8, 9, 10, 11, 12, 13, 14, 15,
- 16, 17, 18, 19, 20, 21, 22, 23,
- 24, 25, 26, 27, 28, 29, 30, 31,
- 32, 33, 34, 35, 36, 37, 38, 39,
- 40, 41, 42, 43, 44, 45, 46, 47,
- 48, 49, 50, 51, 52, 53, 54, 55,
- 56, 57, 58, 59, 60, 61, 62, 63,
- 64, 65, 66, 67, 68, 69, 70, 71,
- },
- .oobfree = { {2, 6}, {72, 56} },
-};
-
-/* 4096-byte page size with 8-bit ECC -- requires 218-byte OOB */
-static struct nand_ecclayout oob_4096_ecc8 = {
- .eccbytes = 128,
- .eccpos = {
- 8, 9, 10, 11, 12, 13, 14, 15,
- 16, 17, 18, 19, 20, 21, 22, 23,
- 24, 25, 26, 27, 28, 29, 30, 31,
- 32, 33, 34, 35, 36, 37, 38, 39,
- 40, 41, 42, 43, 44, 45, 46, 47,
- 48, 49, 50, 51, 52, 53, 54, 55,
- 56, 57, 58, 59, 60, 61, 62, 63,
- 64, 65, 66, 67, 68, 69, 70, 71,
- 72, 73, 74, 75, 76, 77, 78, 79,
- 80, 81, 82, 83, 84, 85, 86, 87,
- 88, 89, 90, 91, 92, 93, 94, 95,
- 96, 97, 98, 99, 100, 101, 102, 103,
- 104, 105, 106, 107, 108, 109, 110, 111,
- 112, 113, 114, 115, 116, 117, 118, 119,
- 120, 121, 122, 123, 124, 125, 126, 127,
- 128, 129, 130, 131, 132, 133, 134, 135,
- },
- .oobfree = { {2, 6}, {136, 82} },
-};
-
-/* 8192-byte page size with 4-bit ECC */
-static struct nand_ecclayout oob_8192_ecc4 = {
- .eccbytes = 128,
- .eccpos = {
- 8, 9, 10, 11, 12, 13, 14, 15,
- 16, 17, 18, 19, 20, 21, 22, 23,
- 24, 25, 26, 27, 28, 29, 30, 31,
- 32, 33, 34, 35, 36, 37, 38, 39,
- 40, 41, 42, 43, 44, 45, 46, 47,
- 48, 49, 50, 51, 52, 53, 54, 55,
- 56, 57, 58, 59, 60, 61, 62, 63,
- 64, 65, 66, 67, 68, 69, 70, 71,
- 72, 73, 74, 75, 76, 77, 78, 79,
- 80, 81, 82, 83, 84, 85, 86, 87,
- 88, 89, 90, 91, 92, 93, 94, 95,
- 96, 97, 98, 99, 100, 101, 102, 103,
- 104, 105, 106, 107, 108, 109, 110, 111,
- 112, 113, 114, 115, 116, 117, 118, 119,
- 120, 121, 122, 123, 124, 125, 126, 127,
- 128, 129, 130, 131, 132, 133, 134, 135,
- },
- .oobfree = { {2, 6}, {136, 208} },
-};
-
-/* 8192-byte page size with 8-bit ECC -- requires 218-byte OOB */
-static struct nand_ecclayout oob_8192_ecc8 = {
- .eccbytes = 256,
- .eccpos = {
- 8, 9, 10, 11, 12, 13, 14, 15,
- 16, 17, 18, 19, 20, 21, 22, 23,
- 24, 25, 26, 27, 28, 29, 30, 31,
- 32, 33, 34, 35, 36, 37, 38, 39,
- 40, 41, 42, 43, 44, 45, 46, 47,
- 48, 49, 50, 51, 52, 53, 54, 55,
- 56, 57, 58, 59, 60, 61, 62, 63,
- 64, 65, 66, 67, 68, 69, 70, 71,
- 72, 73, 74, 75, 76, 77, 78, 79,
- 80, 81, 82, 83, 84, 85, 86, 87,
- 88, 89, 90, 91, 92, 93, 94, 95,
- 96, 97, 98, 99, 100, 101, 102, 103,
- 104, 105, 106, 107, 108, 109, 110, 111,
- 112, 113, 114, 115, 116, 117, 118, 119,
- 120, 121, 122, 123, 124, 125, 126, 127,
- 128, 129, 130, 131, 132, 133, 134, 135,
- 136, 137, 138, 139, 140, 141, 142, 143,
- 144, 145, 146, 147, 148, 149, 150, 151,
- 152, 153, 154, 155, 156, 157, 158, 159,
- 160, 161, 162, 163, 164, 165, 166, 167,
- 168, 169, 170, 171, 172, 173, 174, 175,
- 176, 177, 178, 179, 180, 181, 182, 183,
- 184, 185, 186, 187, 188, 189, 190, 191,
- 192, 193, 194, 195, 196, 197, 198, 199,
- 200, 201, 202, 203, 204, 205, 206, 207,
- 208, 209, 210, 211, 212, 213, 214, 215,
- 216, 217, 218, 219, 220, 221, 222, 223,
- 224, 225, 226, 227, 228, 229, 230, 231,
- 232, 233, 234, 235, 236, 237, 238, 239,
- 240, 241, 242, 243, 244, 245, 246, 247,
- 248, 249, 250, 251, 252, 253, 254, 255,
- 256, 257, 258, 259, 260, 261, 262, 263,
- },
- .oobfree = { {2, 6}, {264, 80} },
-};
-
/*
* Generic flash bbt descriptors
*/
@@ -223,6 +93,57 @@ static struct nand_bbt_descr bbt_mirror_descr = {
.pattern = mirror_pattern,
};
+static int fsl_ifc_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+
+ if (section)
+ return -ERANGE;
+
+ oobregion->offset = 8;
+ oobregion->length = chip->ecc.total;
+
+ return 0;
+}
+
+static int fsl_ifc_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+
+ if (section > 1)
+ return -ERANGE;
+
+ if (mtd->writesize == 512 &&
+ !(chip->options & NAND_BUSWIDTH_16)) {
+ if (!section) {
+ oobregion->offset = 0;
+ oobregion->length = 5;
+ } else {
+ oobregion->offset = 6;
+ oobregion->length = 2;
+ }
+
+ return 0;
+ }
+
+ if (!section) {
+ oobregion->offset = 2;
+ oobregion->length = 6;
+ } else {
+ oobregion->offset = chip->ecc.total + 8;
+ oobregion->length = mtd->oobsize - oobregion->offset;
+ }
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops fsl_ifc_ooblayout_ops = {
+ .ecc = fsl_ifc_ooblayout_ecc,
+ .free = fsl_ifc_ooblayout_free,
+};
+
/*
* Set up the IFC hardware block and page address fields, and the ifc nand
* structure addr field to point to the correct IFC buffer in memory
@@ -232,7 +153,7 @@ static void set_addr(struct mtd_info *mtd, int column, int page_addr, int oob)
struct nand_chip *chip = mtd_to_nand(mtd);
struct fsl_ifc_mtd *priv = nand_get_controller_data(chip);
struct fsl_ifc_ctrl *ctrl = priv->ctrl;
- struct fsl_ifc_regs __iomem *ifc = ctrl->regs;
+ struct fsl_ifc_runtime __iomem *ifc = ctrl->rregs;
int buf_num;
ifc_nand_ctrl->page = page_addr;
@@ -257,18 +178,22 @@ static int is_blank(struct mtd_info *mtd, unsigned int bufnum)
u8 __iomem *addr = priv->vbase + bufnum * (mtd->writesize * 2);
u32 __iomem *mainarea = (u32 __iomem *)addr;
u8 __iomem *oob = addr + mtd->writesize;
- int i;
+ struct mtd_oob_region oobregion = { };
+ int i, section = 0;
for (i = 0; i < mtd->writesize / 4; i++) {
if (__raw_readl(&mainarea[i]) != 0xffffffff)
return 0;
}
- for (i = 0; i < chip->ecc.layout->eccbytes; i++) {
- int pos = chip->ecc.layout->eccpos[i];
+ mtd_ooblayout_ecc(mtd, section++, &oobregion);
+ while (oobregion.length) {
+ for (i = 0; i < oobregion.length; i++) {
+ if (__raw_readb(&oob[oobregion.offset + i]) != 0xff)
+ return 0;
+ }
- if (__raw_readb(&oob[pos]) != 0xff)
- return 0;
+ mtd_ooblayout_ecc(mtd, section++, &oobregion);
}
return 1;
@@ -295,7 +220,7 @@ static void fsl_ifc_run_command(struct mtd_info *mtd)
struct fsl_ifc_mtd *priv = nand_get_controller_data(chip);
struct fsl_ifc_ctrl *ctrl = priv->ctrl;
struct fsl_ifc_nand_ctrl *nctrl = ifc_nand_ctrl;
- struct fsl_ifc_regs __iomem *ifc = ctrl->regs;
+ struct fsl_ifc_runtime __iomem *ifc = ctrl->rregs;
u32 eccstat[4];
int i;
@@ -371,7 +296,7 @@ static void fsl_ifc_do_read(struct nand_chip *chip,
{
struct fsl_ifc_mtd *priv = nand_get_controller_data(chip);
struct fsl_ifc_ctrl *ctrl = priv->ctrl;
- struct fsl_ifc_regs __iomem *ifc = ctrl->regs;
+ struct fsl_ifc_runtime __iomem *ifc = ctrl->rregs;
/* Program FIR/IFC_NAND_FCR0 for Small/Large page */
if (mtd->writesize > 512) {
@@ -411,7 +336,7 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command,
struct nand_chip *chip = mtd_to_nand(mtd);
struct fsl_ifc_mtd *priv = nand_get_controller_data(chip);
struct fsl_ifc_ctrl *ctrl = priv->ctrl;
- struct fsl_ifc_regs __iomem *ifc = ctrl->regs;
+ struct fsl_ifc_runtime __iomem *ifc = ctrl->rregs;
/* clear the read buffer */
ifc_nand_ctrl->read_bytes = 0;
@@ -723,7 +648,7 @@ static int fsl_ifc_wait(struct mtd_info *mtd, struct nand_chip *chip)
{
struct fsl_ifc_mtd *priv = nand_get_controller_data(chip);
struct fsl_ifc_ctrl *ctrl = priv->ctrl;
- struct fsl_ifc_regs __iomem *ifc = ctrl->regs;
+ struct fsl_ifc_runtime __iomem *ifc = ctrl->rregs;
u32 nand_fsr;
/* Use READ_STATUS command, but wait for the device to be ready */
@@ -808,8 +733,8 @@ static int fsl_ifc_chip_init_tail(struct mtd_info *mtd)
chip->ecc.bytes);
dev_dbg(priv->dev, "%s: nand->ecc.total = %d\n", __func__,
chip->ecc.total);
- dev_dbg(priv->dev, "%s: nand->ecc.layout = %p\n", __func__,
- chip->ecc.layout);
+ dev_dbg(priv->dev, "%s: mtd->ooblayout = %p\n", __func__,
+ mtd->ooblayout);
dev_dbg(priv->dev, "%s: mtd->flags = %08x\n", __func__, mtd->flags);
dev_dbg(priv->dev, "%s: mtd->size = %lld\n", __func__, mtd->size);
dev_dbg(priv->dev, "%s: mtd->erasesize = %d\n", __func__,
@@ -825,39 +750,42 @@ static int fsl_ifc_chip_init_tail(struct mtd_info *mtd)
static void fsl_ifc_sram_init(struct fsl_ifc_mtd *priv)
{
struct fsl_ifc_ctrl *ctrl = priv->ctrl;
- struct fsl_ifc_regs __iomem *ifc = ctrl->regs;
+ struct fsl_ifc_runtime __iomem *ifc_runtime = ctrl->rregs;
+ struct fsl_ifc_global __iomem *ifc_global = ctrl->gregs;
uint32_t csor = 0, csor_8k = 0, csor_ext = 0;
uint32_t cs = priv->bank;
/* Save CSOR and CSOR_ext */
- csor = ifc_in32(&ifc->csor_cs[cs].csor);
- csor_ext = ifc_in32(&ifc->csor_cs[cs].csor_ext);
+ csor = ifc_in32(&ifc_global->csor_cs[cs].csor);
+ csor_ext = ifc_in32(&ifc_global->csor_cs[cs].csor_ext);
/* chage PageSize 8K and SpareSize 1K*/
csor_8k = (csor & ~(CSOR_NAND_PGS_MASK)) | 0x0018C000;
- ifc_out32(csor_8k, &ifc->csor_cs[cs].csor);
- ifc_out32(0x0000400, &ifc->csor_cs[cs].csor_ext);
+ ifc_out32(csor_8k, &ifc_global->csor_cs[cs].csor);
+ ifc_out32(0x0000400, &ifc_global->csor_cs[cs].csor_ext);
/* READID */
ifc_out32((IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
- (IFC_FIR_OP_UA << IFC_NAND_FIR0_OP1_SHIFT) |
- (IFC_FIR_OP_RB << IFC_NAND_FIR0_OP2_SHIFT),
- &ifc->ifc_nand.nand_fir0);
+ (IFC_FIR_OP_UA << IFC_NAND_FIR0_OP1_SHIFT) |
+ (IFC_FIR_OP_RB << IFC_NAND_FIR0_OP2_SHIFT),
+ &ifc_runtime->ifc_nand.nand_fir0);
ifc_out32(NAND_CMD_READID << IFC_NAND_FCR0_CMD0_SHIFT,
- &ifc->ifc_nand.nand_fcr0);
- ifc_out32(0x0, &ifc->ifc_nand.row3);
+ &ifc_runtime->ifc_nand.nand_fcr0);
+ ifc_out32(0x0, &ifc_runtime->ifc_nand.row3);
- ifc_out32(0x0, &ifc->ifc_nand.nand_fbcr);
+ ifc_out32(0x0, &ifc_runtime->ifc_nand.nand_fbcr);
/* Program ROW0/COL0 */
- ifc_out32(0x0, &ifc->ifc_nand.row0);
- ifc_out32(0x0, &ifc->ifc_nand.col0);
+ ifc_out32(0x0, &ifc_runtime->ifc_nand.row0);
+ ifc_out32(0x0, &ifc_runtime->ifc_nand.col0);
/* set the chip select for NAND Transaction */
- ifc_out32(cs << IFC_NAND_CSEL_SHIFT, &ifc->ifc_nand.nand_csel);
+ ifc_out32(cs << IFC_NAND_CSEL_SHIFT,
+ &ifc_runtime->ifc_nand.nand_csel);
/* start read seq */
- ifc_out32(IFC_NAND_SEQ_STRT_FIR_STRT, &ifc->ifc_nand.nandseq_strt);
+ ifc_out32(IFC_NAND_SEQ_STRT_FIR_STRT,
+ &ifc_runtime->ifc_nand.nandseq_strt);
/* wait for command complete flag or timeout */
wait_event_timeout(ctrl->nand_wait, ctrl->nand_stat,
@@ -867,17 +795,17 @@ static void fsl_ifc_sram_init(struct fsl_ifc_mtd *priv)
printk(KERN_ERR "fsl-ifc: Failed to Initialise SRAM\n");
/* Restore CSOR and CSOR_ext */
- ifc_out32(csor, &ifc->csor_cs[cs].csor);
- ifc_out32(csor_ext, &ifc->csor_cs[cs].csor_ext);
+ ifc_out32(csor, &ifc_global->csor_cs[cs].csor);
+ ifc_out32(csor_ext, &ifc_global->csor_cs[cs].csor_ext);
}
static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
{
struct fsl_ifc_ctrl *ctrl = priv->ctrl;
- struct fsl_ifc_regs __iomem *ifc = ctrl->regs;
+ struct fsl_ifc_global __iomem *ifc_global = ctrl->gregs;
+ struct fsl_ifc_runtime __iomem *ifc_runtime = ctrl->rregs;
struct nand_chip *chip = &priv->chip;
struct mtd_info *mtd = nand_to_mtd(&priv->chip);
- struct nand_ecclayout *layout;
u32 csor;
/* Fill in fsl_ifc_mtd structure */
@@ -886,7 +814,8 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
/* fill in nand_chip structure */
/* set up function call table */
- if ((ifc_in32(&ifc->cspr_cs[priv->bank].cspr)) & CSPR_PORT_SIZE_16)
+ if ((ifc_in32(&ifc_global->cspr_cs[priv->bank].cspr))
+ & CSPR_PORT_SIZE_16)
chip->read_byte = fsl_ifc_read_byte16;
else
chip->read_byte = fsl_ifc_read_byte;
@@ -900,13 +829,14 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
chip->bbt_td = &bbt_main_descr;
chip->bbt_md = &bbt_mirror_descr;
- ifc_out32(0x0, &ifc->ifc_nand.ncfgr);
+ ifc_out32(0x0, &ifc_runtime->ifc_nand.ncfgr);
/* set up nand options */
chip->bbt_options = NAND_BBT_USE_FLASH;
chip->options = NAND_NO_SUBPAGE_WRITE;
- if (ifc_in32(&ifc->cspr_cs[priv->bank].cspr) & CSPR_PORT_SIZE_16) {
+ if (ifc_in32(&ifc_global->cspr_cs[priv->bank].cspr)
+ & CSPR_PORT_SIZE_16) {
chip->read_byte = fsl_ifc_read_byte16;
chip->options |= NAND_BUSWIDTH_16;
} else {
@@ -919,20 +849,11 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
chip->ecc.read_page = fsl_ifc_read_page;
chip->ecc.write_page = fsl_ifc_write_page;
- csor = ifc_in32(&ifc->csor_cs[priv->bank].csor);
-
- /* Hardware generates ECC per 512 Bytes */
- chip->ecc.size = 512;
- chip->ecc.bytes = 8;
- chip->ecc.strength = 4;
+ csor = ifc_in32(&ifc_global->csor_cs[priv->bank].csor);
switch (csor & CSOR_NAND_PGS_MASK) {
case CSOR_NAND_PGS_512:
- if (chip->options & NAND_BUSWIDTH_16) {
- layout = &oob_512_16bit_ecc4;
- } else {
- layout = &oob_512_8bit_ecc4;
-
+ if (!(chip->options & NAND_BUSWIDTH_16)) {
/* Avoid conflict with bad block marker */
bbt_main_descr.offs = 0;
bbt_mirror_descr.offs = 0;
@@ -942,35 +863,16 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
break;
case CSOR_NAND_PGS_2K:
- layout = &oob_2048_ecc4;
priv->bufnum_mask = 3;
break;
case CSOR_NAND_PGS_4K:
- if ((csor & CSOR_NAND_ECC_MODE_MASK) ==
- CSOR_NAND_ECC_MODE_4) {
- layout = &oob_4096_ecc4;
- } else {
- layout = &oob_4096_ecc8;
- chip->ecc.bytes = 16;
- chip->ecc.strength = 8;
- }
-
priv->bufnum_mask = 1;
break;
case CSOR_NAND_PGS_8K:
- if ((csor & CSOR_NAND_ECC_MODE_MASK) ==
- CSOR_NAND_ECC_MODE_4) {
- layout = &oob_8192_ecc4;
- } else {
- layout = &oob_8192_ecc8;
- chip->ecc.bytes = 16;
- chip->ecc.strength = 8;
- }
-
priv->bufnum_mask = 0;
- break;
+ break;
default:
dev_err(priv->dev, "bad csor %#x: bad page size\n", csor);
@@ -980,9 +882,20 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
/* Must also set CSOR_NAND_ECC_ENC_EN if DEC_EN set */
if (csor & CSOR_NAND_ECC_DEC_EN) {
chip->ecc.mode = NAND_ECC_HW;
- chip->ecc.layout = layout;
+ mtd_set_ooblayout(mtd, &fsl_ifc_ooblayout_ops);
+
+ /* Hardware generates ECC per 512 Bytes */
+ chip->ecc.size = 512;
+ if ((csor & CSOR_NAND_ECC_MODE_MASK) == CSOR_NAND_ECC_MODE_4) {
+ chip->ecc.bytes = 8;
+ chip->ecc.strength = 4;
+ } else {
+ chip->ecc.bytes = 16;
+ chip->ecc.strength = 8;
+ }
} else {
chip->ecc.mode = NAND_ECC_SOFT;
+ chip->ecc.algo = NAND_ECC_HAMMING;
}
if (ctrl->version == FSL_IFC_VERSION_1_1_0)
@@ -1007,10 +920,10 @@ static int fsl_ifc_chip_remove(struct fsl_ifc_mtd *priv)
return 0;
}
-static int match_bank(struct fsl_ifc_regs __iomem *ifc, int bank,
+static int match_bank(struct fsl_ifc_global __iomem *ifc_global, int bank,
phys_addr_t addr)
{
- u32 cspr = ifc_in32(&ifc->cspr_cs[bank].cspr);
+ u32 cspr = ifc_in32(&ifc_global->cspr_cs[bank].cspr);
if (!(cspr & CSPR_V))
return 0;
@@ -1024,7 +937,7 @@ static DEFINE_MUTEX(fsl_ifc_nand_mutex);
static int fsl_ifc_nand_probe(struct platform_device *dev)
{
- struct fsl_ifc_regs __iomem *ifc;
+ struct fsl_ifc_runtime __iomem *ifc;
struct fsl_ifc_mtd *priv;
struct resource res;
static const char *part_probe_types[]
@@ -1034,9 +947,9 @@ static int fsl_ifc_nand_probe(struct platform_device *dev)
struct device_node *node = dev->dev.of_node;
struct mtd_info *mtd;
- if (!fsl_ifc_ctrl_dev || !fsl_ifc_ctrl_dev->regs)
+ if (!fsl_ifc_ctrl_dev || !fsl_ifc_ctrl_dev->rregs)
return -ENODEV;
- ifc = fsl_ifc_ctrl_dev->regs;
+ ifc = fsl_ifc_ctrl_dev->rregs;
/* get, allocate and map the memory resource */
ret = of_address_to_resource(node, 0, &res);
@@ -1047,7 +960,7 @@ static int fsl_ifc_nand_probe(struct platform_device *dev)
/* find which chip select it is connected to */
for (bank = 0; bank < fsl_ifc_ctrl_dev->banks; bank++) {
- if (match_bank(ifc, bank, res.start))
+ if (match_bank(fsl_ifc_ctrl_dev->gregs, bank, res.start))
break;
}
diff --git a/drivers/mtd/nand/fsl_upm.c b/drivers/mtd/nand/fsl_upm.c
index cafd12de7276..d85fa2555b68 100644
--- a/drivers/mtd/nand/fsl_upm.c
+++ b/drivers/mtd/nand/fsl_upm.c
@@ -170,6 +170,7 @@ static int fun_chip_init(struct fsl_upm_nand *fun,
fun->chip.read_buf = fun_read_buf;
fun->chip.write_buf = fun_write_buf;
fun->chip.ecc.mode = NAND_ECC_SOFT;
+ fun->chip.ecc.algo = NAND_ECC_HAMMING;
if (fun->mchip_count > 1)
fun->chip.select_chip = fun_select_chip;
diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c
index 1bdcd4fa26d4..d4f454a4b35e 100644
--- a/drivers/mtd/nand/fsmc_nand.c
+++ b/drivers/mtd/nand/fsmc_nand.c
@@ -39,210 +39,41 @@
#include <linux/amba/bus.h>
#include <mtd/mtd-abi.h>
-static struct nand_ecclayout fsmc_ecc1_128_layout = {
- .eccbytes = 24,
- .eccpos = {2, 3, 4, 18, 19, 20, 34, 35, 36, 50, 51, 52,
- 66, 67, 68, 82, 83, 84, 98, 99, 100, 114, 115, 116},
- .oobfree = {
- {.offset = 8, .length = 8},
- {.offset = 24, .length = 8},
- {.offset = 40, .length = 8},
- {.offset = 56, .length = 8},
- {.offset = 72, .length = 8},
- {.offset = 88, .length = 8},
- {.offset = 104, .length = 8},
- {.offset = 120, .length = 8}
- }
-};
+static int fsmc_ecc1_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
-static struct nand_ecclayout fsmc_ecc1_64_layout = {
- .eccbytes = 12,
- .eccpos = {2, 3, 4, 18, 19, 20, 34, 35, 36, 50, 51, 52},
- .oobfree = {
- {.offset = 8, .length = 8},
- {.offset = 24, .length = 8},
- {.offset = 40, .length = 8},
- {.offset = 56, .length = 8},
- }
-};
+ if (section >= chip->ecc.steps)
+ return -ERANGE;
-static struct nand_ecclayout fsmc_ecc1_16_layout = {
- .eccbytes = 3,
- .eccpos = {2, 3, 4},
- .oobfree = {
- {.offset = 8, .length = 8},
- }
-};
+ oobregion->offset = (section * 16) + 2;
+ oobregion->length = 3;
-/*
- * ECC4 layout for NAND of pagesize 8192 bytes & OOBsize 256 bytes. 13*16 bytes
- * of OB size is reserved for ECC, Byte no. 0 & 1 reserved for bad block and 46
- * bytes are free for use.
- */
-static struct nand_ecclayout fsmc_ecc4_256_layout = {
- .eccbytes = 208,
- .eccpos = { 2, 3, 4, 5, 6, 7, 8,
- 9, 10, 11, 12, 13, 14,
- 18, 19, 20, 21, 22, 23, 24,
- 25, 26, 27, 28, 29, 30,
- 34, 35, 36, 37, 38, 39, 40,
- 41, 42, 43, 44, 45, 46,
- 50, 51, 52, 53, 54, 55, 56,
- 57, 58, 59, 60, 61, 62,
- 66, 67, 68, 69, 70, 71, 72,
- 73, 74, 75, 76, 77, 78,
- 82, 83, 84, 85, 86, 87, 88,
- 89, 90, 91, 92, 93, 94,
- 98, 99, 100, 101, 102, 103, 104,
- 105, 106, 107, 108, 109, 110,
- 114, 115, 116, 117, 118, 119, 120,
- 121, 122, 123, 124, 125, 126,
- 130, 131, 132, 133, 134, 135, 136,
- 137, 138, 139, 140, 141, 142,
- 146, 147, 148, 149, 150, 151, 152,
- 153, 154, 155, 156, 157, 158,
- 162, 163, 164, 165, 166, 167, 168,
- 169, 170, 171, 172, 173, 174,
- 178, 179, 180, 181, 182, 183, 184,
- 185, 186, 187, 188, 189, 190,
- 194, 195, 196, 197, 198, 199, 200,
- 201, 202, 203, 204, 205, 206,
- 210, 211, 212, 213, 214, 215, 216,
- 217, 218, 219, 220, 221, 222,
- 226, 227, 228, 229, 230, 231, 232,
- 233, 234, 235, 236, 237, 238,
- 242, 243, 244, 245, 246, 247, 248,
- 249, 250, 251, 252, 253, 254
- },
- .oobfree = {
- {.offset = 15, .length = 3},
- {.offset = 31, .length = 3},
- {.offset = 47, .length = 3},
- {.offset = 63, .length = 3},
- {.offset = 79, .length = 3},
- {.offset = 95, .length = 3},
- {.offset = 111, .length = 3},
- {.offset = 127, .length = 3},
- {.offset = 143, .length = 3},
- {.offset = 159, .length = 3},
- {.offset = 175, .length = 3},
- {.offset = 191, .length = 3},
- {.offset = 207, .length = 3},
- {.offset = 223, .length = 3},
- {.offset = 239, .length = 3},
- {.offset = 255, .length = 1}
- }
-};
+ return 0;
+}
-/*
- * ECC4 layout for NAND of pagesize 4096 bytes & OOBsize 224 bytes. 13*8 bytes
- * of OOB size is reserved for ECC, Byte no. 0 & 1 reserved for bad block & 118
- * bytes are free for use.
- */
-static struct nand_ecclayout fsmc_ecc4_224_layout = {
- .eccbytes = 104,
- .eccpos = { 2, 3, 4, 5, 6, 7, 8,
- 9, 10, 11, 12, 13, 14,
- 18, 19, 20, 21, 22, 23, 24,
- 25, 26, 27, 28, 29, 30,
- 34, 35, 36, 37, 38, 39, 40,
- 41, 42, 43, 44, 45, 46,
- 50, 51, 52, 53, 54, 55, 56,
- 57, 58, 59, 60, 61, 62,
- 66, 67, 68, 69, 70, 71, 72,
- 73, 74, 75, 76, 77, 78,
- 82, 83, 84, 85, 86, 87, 88,
- 89, 90, 91, 92, 93, 94,
- 98, 99, 100, 101, 102, 103, 104,
- 105, 106, 107, 108, 109, 110,
- 114, 115, 116, 117, 118, 119, 120,
- 121, 122, 123, 124, 125, 126
- },
- .oobfree = {
- {.offset = 15, .length = 3},
- {.offset = 31, .length = 3},
- {.offset = 47, .length = 3},
- {.offset = 63, .length = 3},
- {.offset = 79, .length = 3},
- {.offset = 95, .length = 3},
- {.offset = 111, .length = 3},
- {.offset = 127, .length = 97}
- }
-};
+static int fsmc_ecc1_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
-/*
- * ECC4 layout for NAND of pagesize 4096 bytes & OOBsize 128 bytes. 13*8 bytes
- * of OOB size is reserved for ECC, Byte no. 0 & 1 reserved for bad block & 22
- * bytes are free for use.
- */
-static struct nand_ecclayout fsmc_ecc4_128_layout = {
- .eccbytes = 104,
- .eccpos = { 2, 3, 4, 5, 6, 7, 8,
- 9, 10, 11, 12, 13, 14,
- 18, 19, 20, 21, 22, 23, 24,
- 25, 26, 27, 28, 29, 30,
- 34, 35, 36, 37, 38, 39, 40,
- 41, 42, 43, 44, 45, 46,
- 50, 51, 52, 53, 54, 55, 56,
- 57, 58, 59, 60, 61, 62,
- 66, 67, 68, 69, 70, 71, 72,
- 73, 74, 75, 76, 77, 78,
- 82, 83, 84, 85, 86, 87, 88,
- 89, 90, 91, 92, 93, 94,
- 98, 99, 100, 101, 102, 103, 104,
- 105, 106, 107, 108, 109, 110,
- 114, 115, 116, 117, 118, 119, 120,
- 121, 122, 123, 124, 125, 126
- },
- .oobfree = {
- {.offset = 15, .length = 3},
- {.offset = 31, .length = 3},
- {.offset = 47, .length = 3},
- {.offset = 63, .length = 3},
- {.offset = 79, .length = 3},
- {.offset = 95, .length = 3},
- {.offset = 111, .length = 3},
- {.offset = 127, .length = 1}
- }
-};
+ if (section >= chip->ecc.steps)
+ return -ERANGE;
-/*
- * ECC4 layout for NAND of pagesize 2048 bytes & OOBsize 64 bytes. 13*4 bytes of
- * OOB size is reserved for ECC, Byte no. 0 & 1 reserved for bad block and 10
- * bytes are free for use.
- */
-static struct nand_ecclayout fsmc_ecc4_64_layout = {
- .eccbytes = 52,
- .eccpos = { 2, 3, 4, 5, 6, 7, 8,
- 9, 10, 11, 12, 13, 14,
- 18, 19, 20, 21, 22, 23, 24,
- 25, 26, 27, 28, 29, 30,
- 34, 35, 36, 37, 38, 39, 40,
- 41, 42, 43, 44, 45, 46,
- 50, 51, 52, 53, 54, 55, 56,
- 57, 58, 59, 60, 61, 62,
- },
- .oobfree = {
- {.offset = 15, .length = 3},
- {.offset = 31, .length = 3},
- {.offset = 47, .length = 3},
- {.offset = 63, .length = 1},
- }
-};
+ oobregion->offset = (section * 16) + 8;
-/*
- * ECC4 layout for NAND of pagesize 512 bytes & OOBsize 16 bytes. 13 bytes of
- * OOB size is reserved for ECC, Byte no. 4 & 5 reserved for bad block and One
- * byte is free for use.
- */
-static struct nand_ecclayout fsmc_ecc4_16_layout = {
- .eccbytes = 13,
- .eccpos = { 0, 1, 2, 3, 6, 7, 8,
- 9, 10, 11, 12, 13, 14
- },
- .oobfree = {
- {.offset = 15, .length = 1},
- }
+ if (section < chip->ecc.steps - 1)
+ oobregion->length = 8;
+ else
+ oobregion->length = mtd->oobsize - oobregion->offset;
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops fsmc_ecc1_ooblayout_ops = {
+ .ecc = fsmc_ecc1_ooblayout_ecc,
+ .free = fsmc_ecc1_ooblayout_free,
};
/*
@@ -250,28 +81,46 @@ static struct nand_ecclayout fsmc_ecc4_16_layout = {
* There are 13 bytes of ecc for every 512 byte block and it has to be read
* consecutively and immediately after the 512 byte data block for hardware to
* generate the error bit offsets in 512 byte data.
- * Managing the ecc bytes in the following way makes it easier for software to
- * read ecc bytes consecutive to data bytes. This way is similar to
- * oobfree structure maintained already in generic nand driver
*/
-static struct fsmc_eccplace fsmc_ecc4_lp_place = {
- .eccplace = {
- {.offset = 2, .length = 13},
- {.offset = 18, .length = 13},
- {.offset = 34, .length = 13},
- {.offset = 50, .length = 13},
- {.offset = 66, .length = 13},
- {.offset = 82, .length = 13},
- {.offset = 98, .length = 13},
- {.offset = 114, .length = 13}
- }
-};
+static int fsmc_ecc4_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
-static struct fsmc_eccplace fsmc_ecc4_sp_place = {
- .eccplace = {
- {.offset = 0, .length = 4},
- {.offset = 6, .length = 9}
- }
+ if (section >= chip->ecc.steps)
+ return -ERANGE;
+
+ oobregion->length = chip->ecc.bytes;
+
+ if (!section && mtd->writesize <= 512)
+ oobregion->offset = 0;
+ else
+ oobregion->offset = (section * 16) + 2;
+
+ return 0;
+}
+
+static int fsmc_ecc4_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+
+ if (section >= chip->ecc.steps)
+ return -ERANGE;
+
+ oobregion->offset = (section * 16) + 15;
+
+ if (section < chip->ecc.steps - 1)
+ oobregion->length = 3;
+ else
+ oobregion->length = mtd->oobsize - oobregion->offset;
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops fsmc_ecc4_ooblayout_ops = {
+ .ecc = fsmc_ecc4_ooblayout_ecc,
+ .free = fsmc_ecc4_ooblayout_free,
};
/**
@@ -283,7 +132,6 @@ static struct fsmc_eccplace fsmc_ecc4_sp_place = {
* @partitions: Partition info for a NAND Flash.
* @nr_partitions: Total number of partition of a NAND flash.
*
- * @ecc_place: ECC placing locations in oobfree type format.
* @bank: Bank number for probed device.
* @clk: Clock structure for FSMC.
*
@@ -303,7 +151,6 @@ struct fsmc_nand_data {
struct mtd_partition *partitions;
unsigned int nr_partitions;
- struct fsmc_eccplace *ecc_place;
unsigned int bank;
struct device *dev;
enum access_mode mode;
@@ -710,8 +557,6 @@ static void fsmc_write_buf_dma(struct mtd_info *mtd, const uint8_t *buf,
static int fsmc_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *buf, int oob_required, int page)
{
- struct fsmc_nand_data *host = mtd_to_fsmc(mtd);
- struct fsmc_eccplace *ecc_place = host->ecc_place;
int i, j, s, stat, eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
int eccsteps = chip->ecc.steps;
@@ -734,9 +579,15 @@ static int fsmc_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
chip->read_buf(mtd, p, eccsize);
for (j = 0; j < eccbytes;) {
- off = ecc_place->eccplace[group].offset;
- len = ecc_place->eccplace[group].length;
- group++;
+ struct mtd_oob_region oobregion;
+ int ret;
+
+ ret = mtd_ooblayout_ecc(mtd, group++, &oobregion);
+ if (ret)
+ return ret;
+
+ off = oobregion.offset;
+ len = oobregion.length;
/*
* length is intentionally kept a higher multiple of 2
@@ -1084,24 +935,10 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
if (AMBA_REV_BITS(host->pid) >= 8) {
switch (mtd->oobsize) {
case 16:
- nand->ecc.layout = &fsmc_ecc4_16_layout;
- host->ecc_place = &fsmc_ecc4_sp_place;
- break;
case 64:
- nand->ecc.layout = &fsmc_ecc4_64_layout;
- host->ecc_place = &fsmc_ecc4_lp_place;
- break;
case 128:
- nand->ecc.layout = &fsmc_ecc4_128_layout;
- host->ecc_place = &fsmc_ecc4_lp_place;
- break;
case 224:
- nand->ecc.layout = &fsmc_ecc4_224_layout;
- host->ecc_place = &fsmc_ecc4_lp_place;
- break;
case 256:
- nand->ecc.layout = &fsmc_ecc4_256_layout;
- host->ecc_place = &fsmc_ecc4_lp_place;
break;
default:
dev_warn(&pdev->dev, "No oob scheme defined for oobsize %d\n",
@@ -1109,6 +946,8 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
ret = -EINVAL;
goto err_probe;
}
+
+ mtd_set_ooblayout(mtd, &fsmc_ecc4_ooblayout_ops);
} else {
switch (nand->ecc.mode) {
case NAND_ECC_HW:
@@ -1119,9 +958,11 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
nand->ecc.strength = 1;
break;
- case NAND_ECC_SOFT_BCH:
- dev_info(&pdev->dev, "Using 4-bit SW BCH ECC scheme\n");
- break;
+ case NAND_ECC_SOFT:
+ if (nand->ecc.algo == NAND_ECC_BCH) {
+ dev_info(&pdev->dev, "Using 4-bit SW BCH ECC scheme\n");
+ break;
+ }
default:
dev_err(&pdev->dev, "Unsupported ECC mode!\n");
@@ -1132,16 +973,13 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
* Don't set layout for BCH4 SW ECC. This will be
* generated later in nand_bch_init() later.
*/
- if (nand->ecc.mode != NAND_ECC_SOFT_BCH) {
+ if (nand->ecc.mode == NAND_ECC_HW) {
switch (mtd->oobsize) {
case 16:
- nand->ecc.layout = &fsmc_ecc1_16_layout;
- break;
case 64:
- nand->ecc.layout = &fsmc_ecc1_64_layout;
- break;
case 128:
- nand->ecc.layout = &fsmc_ecc1_128_layout;
+ mtd_set_ooblayout(mtd,
+ &fsmc_ecc1_ooblayout_ops);
break;
default:
dev_warn(&pdev->dev,
diff --git a/drivers/mtd/nand/gpio.c b/drivers/mtd/nand/gpio.c
index ded658fc7d73..6317f6836022 100644
--- a/drivers/mtd/nand/gpio.c
+++ b/drivers/mtd/nand/gpio.c
@@ -273,6 +273,7 @@ static int gpio_nand_probe(struct platform_device *pdev)
nand_set_flash_node(chip, pdev->dev.of_node);
chip->IO_ADDR_W = chip->IO_ADDR_R;
chip->ecc.mode = NAND_ECC_SOFT;
+ chip->ecc.algo = NAND_ECC_HAMMING;
chip->options = gpiomtd->plat.options;
chip->chip_delay = gpiomtd->plat.chip_delay;
chip->cmd_ctrl = gpio_nand_cmd_ctrl;
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index 8122c699ccf2..6e461560c6a8 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -25,7 +25,6 @@
#include <linux/mtd/partitions.h>
#include <linux/of.h>
#include <linux/of_device.h>
-#include <linux/of_mtd.h>
#include "gpmi-nand.h"
#include "bch-regs.h"
@@ -47,10 +46,44 @@ static struct nand_bbt_descr gpmi_bbt_descr = {
* We may change the layout if we can get the ECC info from the datasheet,
* else we will use all the (page + OOB).
*/
-static struct nand_ecclayout gpmi_hw_ecclayout = {
- .eccbytes = 0,
- .eccpos = { 0, },
- .oobfree = { {.offset = 0, .length = 0} }
+static int gpmi_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct gpmi_nand_data *this = nand_get_controller_data(chip);
+ struct bch_geometry *geo = &this->bch_geometry;
+
+ if (section)
+ return -ERANGE;
+
+ oobregion->offset = 0;
+ oobregion->length = geo->page_size - mtd->writesize;
+
+ return 0;
+}
+
+static int gpmi_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct gpmi_nand_data *this = nand_get_controller_data(chip);
+ struct bch_geometry *geo = &this->bch_geometry;
+
+ if (section)
+ return -ERANGE;
+
+ /* The available oob size we have. */
+ if (geo->page_size < mtd->writesize + mtd->oobsize) {
+ oobregion->offset = geo->page_size - mtd->writesize;
+ oobregion->length = mtd->oobsize - oobregion->offset;
+ }
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops gpmi_ooblayout_ops = {
+ .ecc = gpmi_ooblayout_ecc,
+ .free = gpmi_ooblayout_free,
};
static const struct gpmi_devdata gpmi_devdata_imx23 = {
@@ -141,7 +174,6 @@ static int set_geometry_by_ecc_info(struct gpmi_nand_data *this)
struct bch_geometry *geo = &this->bch_geometry;
struct nand_chip *chip = &this->nand;
struct mtd_info *mtd = nand_to_mtd(chip);
- struct nand_oobfree *of = gpmi_hw_ecclayout.oobfree;
unsigned int block_mark_bit_offset;
if (!(chip->ecc_strength_ds > 0 && chip->ecc_step_ds > 0))
@@ -229,12 +261,6 @@ static int set_geometry_by_ecc_info(struct gpmi_nand_data *this)
geo->page_size = mtd->writesize + geo->metadata_size +
(geo->gf_len * geo->ecc_strength * geo->ecc_chunk_count) / 8;
- /* The available oob size we have. */
- if (geo->page_size < mtd->writesize + mtd->oobsize) {
- of->offset = geo->page_size - mtd->writesize;
- of->length = mtd->oobsize - of->offset;
- }
-
geo->payload_size = mtd->writesize;
geo->auxiliary_status_offset = ALIGN(geo->metadata_size, 4);
@@ -797,6 +823,7 @@ static void gpmi_free_dma_buffer(struct gpmi_nand_data *this)
this->cmd_buffer = NULL;
this->data_buffer_dma = NULL;
+ this->raw_buffer = NULL;
this->page_buffer_virt = NULL;
this->page_buffer_size = 0;
}
@@ -1037,14 +1064,87 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
/* Loop over status bytes, accumulating ECC status. */
status = auxiliary_virt + nfc_geo->auxiliary_status_offset;
+ read_page_swap_end(this, buf, nfc_geo->payload_size,
+ this->payload_virt, this->payload_phys,
+ nfc_geo->payload_size,
+ payload_virt, payload_phys);
+
for (i = 0; i < nfc_geo->ecc_chunk_count; i++, status++) {
if ((*status == STATUS_GOOD) || (*status == STATUS_ERASED))
continue;
if (*status == STATUS_UNCORRECTABLE) {
+ int eccbits = nfc_geo->ecc_strength * nfc_geo->gf_len;
+ u8 *eccbuf = this->raw_buffer;
+ int offset, bitoffset;
+ int eccbytes;
+ int flips;
+
+ /* Read ECC bytes into our internal raw_buffer */
+ offset = nfc_geo->metadata_size * 8;
+ offset += ((8 * nfc_geo->ecc_chunk_size) + eccbits) * (i + 1);
+ offset -= eccbits;
+ bitoffset = offset % 8;
+ eccbytes = DIV_ROUND_UP(offset + eccbits, 8);
+ offset /= 8;
+ eccbytes -= offset;
+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, offset, -1);
+ chip->read_buf(mtd, eccbuf, eccbytes);
+
+ /*
+ * ECC data are not byte aligned and we may have
+ * in-band data in the first and last byte of
+ * eccbuf. Set non-eccbits to one so that
+ * nand_check_erased_ecc_chunk() does not count them
+ * as bitflips.
+ */
+ if (bitoffset)
+ eccbuf[0] |= GENMASK(bitoffset - 1, 0);
+
+ bitoffset = (bitoffset + eccbits) % 8;
+ if (bitoffset)
+ eccbuf[eccbytes - 1] |= GENMASK(7, bitoffset);
+
+ /*
+ * The ECC hardware has an uncorrectable ECC status
+ * code in case we have bitflips in an erased page. As
+ * nothing was written into this subpage the ECC is
+ * obviously wrong and we can not trust it. We assume
+ * at this point that we are reading an erased page and
+ * try to correct the bitflips in buffer up to
+ * ecc_strength bitflips. If this is a page with random
+ * data, we exceed this number of bitflips and have a
+ * ECC failure. Otherwise we use the corrected buffer.
+ */
+ if (i == 0) {
+ /* The first block includes metadata */
+ flips = nand_check_erased_ecc_chunk(
+ buf + i * nfc_geo->ecc_chunk_size,
+ nfc_geo->ecc_chunk_size,
+ eccbuf, eccbytes,
+ auxiliary_virt,
+ nfc_geo->metadata_size,
+ nfc_geo->ecc_strength);
+ } else {
+ flips = nand_check_erased_ecc_chunk(
+ buf + i * nfc_geo->ecc_chunk_size,
+ nfc_geo->ecc_chunk_size,
+ eccbuf, eccbytes,
+ NULL, 0,
+ nfc_geo->ecc_strength);
+ }
+
+ if (flips > 0) {
+ max_bitflips = max_t(unsigned int, max_bitflips,
+ flips);
+ mtd->ecc_stats.corrected += flips;
+ continue;
+ }
+
mtd->ecc_stats.failed++;
continue;
}
+
mtd->ecc_stats.corrected += *status;
max_bitflips = max_t(unsigned int, max_bitflips, *status);
}
@@ -1064,11 +1164,6 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
chip->oob_poi[0] = ((uint8_t *) auxiliary_virt)[0];
}
- read_page_swap_end(this, buf, nfc_geo->payload_size,
- this->payload_virt, this->payload_phys,
- nfc_geo->payload_size,
- payload_virt, payload_phys);
-
return max_bitflips;
}
@@ -1327,18 +1422,19 @@ static int gpmi_ecc_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
static int
gpmi_ecc_write_oob(struct mtd_info *mtd, struct nand_chip *chip, int page)
{
- struct nand_oobfree *of = mtd->ecclayout->oobfree;
+ struct mtd_oob_region of = { };
int status = 0;
/* Do we have available oob area? */
- if (!of->length)
+ mtd_ooblayout_free(mtd, 0, &of);
+ if (!of.length)
return -EPERM;
if (!nand_is_slc(chip))
return -EPERM;
- chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize + of->offset, page);
- chip->write_buf(mtd, chip->oob_poi + of->offset, of->length);
+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize + of.offset, page);
+ chip->write_buf(mtd, chip->oob_poi + of.offset, of.length);
chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
status = chip->waitfunc(mtd, chip);
@@ -1840,6 +1936,7 @@ static void gpmi_nand_exit(struct gpmi_nand_data *this)
static int gpmi_init_last(struct gpmi_nand_data *this)
{
struct nand_chip *chip = &this->nand;
+ struct mtd_info *mtd = nand_to_mtd(chip);
struct nand_ecc_ctrl *ecc = &chip->ecc;
struct bch_geometry *bch_geo = &this->bch_geometry;
int ret;
@@ -1861,7 +1958,7 @@ static int gpmi_init_last(struct gpmi_nand_data *this)
ecc->mode = NAND_ECC_HW;
ecc->size = bch_geo->ecc_chunk_size;
ecc->strength = bch_geo->ecc_strength;
- ecc->layout = &gpmi_hw_ecclayout;
+ mtd_set_ooblayout(mtd, &gpmi_ooblayout_ops);
/*
* We only enable the subpage read when:
@@ -1914,16 +2011,6 @@ static int gpmi_nand_init(struct gpmi_nand_data *this)
/* Set up swap_block_mark, must be set before the gpmi_set_geometry() */
this->swap_block_mark = !GPMI_IS_MX23(this);
- if (of_get_nand_on_flash_bbt(this->dev->of_node)) {
- chip->bbt_options |= NAND_BBT_USE_FLASH | NAND_BBT_NO_OOB;
-
- if (of_property_read_bool(this->dev->of_node,
- "fsl,no-blockmark-swap"))
- this->swap_block_mark = false;
- }
- dev_dbg(this->dev, "Blockmark swapping %sabled\n",
- this->swap_block_mark ? "en" : "dis");
-
/*
* Allocate a temporary DMA buffer for reading ID in the
* nand_scan_ident().
@@ -1938,6 +2025,16 @@ static int gpmi_nand_init(struct gpmi_nand_data *this)
if (ret)
goto err_out;
+ if (chip->bbt_options & NAND_BBT_USE_FLASH) {
+ chip->bbt_options |= NAND_BBT_NO_OOB;
+
+ if (of_property_read_bool(this->dev->of_node,
+ "fsl,no-blockmark-swap"))
+ this->swap_block_mark = false;
+ }
+ dev_dbg(this->dev, "Blockmark swapping %sabled\n",
+ this->swap_block_mark ? "en" : "dis");
+
ret = gpmi_init_last(this);
if (ret)
goto err_out;
diff --git a/drivers/mtd/nand/hisi504_nand.c b/drivers/mtd/nand/hisi504_nand.c
index 96502b624cfb..9432546f4cd4 100644
--- a/drivers/mtd/nand/hisi504_nand.c
+++ b/drivers/mtd/nand/hisi504_nand.c
@@ -19,7 +19,6 @@
* GNU General Public License for more details.
*/
#include <linux/of.h>
-#include <linux/of_mtd.h>
#include <linux/mtd/mtd.h>
#include <linux/sizes.h>
#include <linux/clk.h>
@@ -631,8 +630,28 @@ static void hisi_nfc_host_init(struct hinfc_host *host)
hinfc_write(host, HINFC504_INTEN_DMA, HINFC504_INTEN);
}
-static struct nand_ecclayout nand_ecc_2K_16bits = {
- .oobfree = { {2, 6} },
+static int hisi_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ /* FIXME: add ECC bytes position */
+ return -ENOTSUPP;
+}
+
+static int hisi_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section)
+ return -ERANGE;
+
+ oobregion->offset = 2;
+ oobregion->length = 6;
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops hisi_ooblayout_ops = {
+ .ecc = hisi_ooblayout_ecc,
+ .free = hisi_ooblayout_free,
};
static int hisi_nfc_ecc_probe(struct hinfc_host *host)
@@ -642,10 +661,9 @@ static int hisi_nfc_ecc_probe(struct hinfc_host *host)
struct device *dev = host->dev;
struct nand_chip *chip = &host->chip;
struct mtd_info *mtd = nand_to_mtd(chip);
- struct device_node *np = host->dev->of_node;
- size = of_get_nand_ecc_step_size(np);
- strength = of_get_nand_ecc_strength(np);
+ size = chip->ecc.size;
+ strength = chip->ecc.strength;
if (size != 1024) {
dev_err(dev, "error ecc size: %d\n", size);
return -EINVAL;
@@ -668,7 +686,7 @@ static int hisi_nfc_ecc_probe(struct hinfc_host *host)
case 16:
ecc_bits = 6;
if (mtd->writesize == 2048)
- chip->ecc.layout = &nand_ecc_2K_16bits;
+ mtd_set_ooblayout(mtd, &hisi_ooblayout_ops);
/* TODO: add more page size support */
break;
@@ -695,7 +713,7 @@ static int hisi_nfc_ecc_probe(struct hinfc_host *host)
static int hisi_nfc_probe(struct platform_device *pdev)
{
- int ret = 0, irq, buswidth, flag, max_chips = HINFC504_MAX_CHIP;
+ int ret = 0, irq, flag, max_chips = HINFC504_MAX_CHIP;
struct device *dev = &pdev->dev;
struct hinfc_host *host;
struct nand_chip *chip;
@@ -747,12 +765,6 @@ static int hisi_nfc_probe(struct platform_device *pdev)
chip->read_buf = hisi_nfc_read_buf;
chip->chip_delay = HINFC504_CHIP_DELAY;
- chip->ecc.mode = of_get_nand_ecc_mode(np);
-
- buswidth = of_get_nand_bus_width(np);
- if (buswidth == 16)
- chip->options |= NAND_BUSWIDTH_16;
-
hisi_nfc_host_init(host);
ret = devm_request_irq(dev, irq, hinfc_irq_handle, 0x0, "nandc", host);
diff --git a/drivers/mtd/nand/jz4740_nand.c b/drivers/mtd/nand/jz4740_nand.c
index 673ceb2a0b44..5551c36adbdf 100644
--- a/drivers/mtd/nand/jz4740_nand.c
+++ b/drivers/mtd/nand/jz4740_nand.c
@@ -221,7 +221,6 @@ static int jz_nand_correct_ecc_rs(struct mtd_info *mtd, uint8_t *dat,
struct jz_nand *nand = mtd_to_jz_nand(mtd);
int i, error_count, index;
uint32_t reg, status, error;
- uint32_t t;
unsigned int timeout = 1000;
for (i = 0; i < 9; ++i)
@@ -476,7 +475,7 @@ static int jz_nand_probe(struct platform_device *pdev)
}
if (pdata && pdata->ident_callback) {
- pdata->ident_callback(pdev, chip, &pdata->partitions,
+ pdata->ident_callback(pdev, mtd, &pdata->partitions,
&pdata->num_partitions);
}
diff --git a/drivers/mtd/nand/jz4780_bch.c b/drivers/mtd/nand/jz4780_bch.c
index 755499c6650e..d74f4ba4a6f4 100644
--- a/drivers/mtd/nand/jz4780_bch.c
+++ b/drivers/mtd/nand/jz4780_bch.c
@@ -287,7 +287,6 @@ static struct jz4780_bch *jz4780_bch_get(struct device_node *np)
bch = platform_get_drvdata(pdev);
clk_prepare_enable(bch->clk);
- bch->dev = &pdev->dev;
return bch;
}
diff --git a/drivers/mtd/nand/jz4780_nand.c b/drivers/mtd/nand/jz4780_nand.c
index e1c016c9d32d..daf3c4217f4d 100644
--- a/drivers/mtd/nand/jz4780_nand.c
+++ b/drivers/mtd/nand/jz4780_nand.c
@@ -17,7 +17,6 @@
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/gpio/consumer.h>
-#include <linux/of_mtd.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/mtd/mtd.h>
@@ -56,8 +55,6 @@ struct jz4780_nand_chip {
struct nand_chip chip;
struct list_head chip_list;
- struct nand_ecclayout ecclayout;
-
struct gpio_desc *busy_gpio;
struct gpio_desc *wp_gpio;
unsigned int reading: 1;
@@ -165,8 +162,7 @@ static int jz4780_nand_init_ecc(struct jz4780_nand_chip *nand, struct device *de
struct nand_chip *chip = &nand->chip;
struct mtd_info *mtd = nand_to_mtd(chip);
struct jz4780_nand_controller *nfc = to_jz4780_nand_controller(chip->controller);
- struct nand_ecclayout *layout = &nand->ecclayout;
- u32 start, i;
+ int eccbytes;
chip->ecc.bytes = fls((1 + 8) * chip->ecc.size) *
(chip->ecc.strength / 8);
@@ -183,7 +179,6 @@ static int jz4780_nand_init_ecc(struct jz4780_nand_chip *nand, struct device *de
chip->ecc.correct = jz4780_nand_ecc_correct;
/* fall through */
case NAND_ECC_SOFT:
- case NAND_ECC_SOFT_BCH:
dev_info(dev, "using %s (strength %d, size %d, bytes %d)\n",
(nfc->bch) ? "hardware BCH" : "software ECC",
chip->ecc.strength, chip->ecc.size, chip->ecc.bytes);
@@ -201,23 +196,17 @@ static int jz4780_nand_init_ecc(struct jz4780_nand_chip *nand, struct device *de
return 0;
/* Generate ECC layout. ECC codes are right aligned in the OOB area. */
- layout->eccbytes = mtd->writesize / chip->ecc.size * chip->ecc.bytes;
+ eccbytes = mtd->writesize / chip->ecc.size * chip->ecc.bytes;
- if (layout->eccbytes > mtd->oobsize - 2) {
+ if (eccbytes > mtd->oobsize - 2) {
dev_err(dev,
"invalid ECC config: required %d ECC bytes, but only %d are available",
- layout->eccbytes, mtd->oobsize - 2);
+ eccbytes, mtd->oobsize - 2);
return -EINVAL;
}
- start = mtd->oobsize - layout->eccbytes;
- for (i = 0; i < layout->eccbytes; i++)
- layout->eccpos[i] = start + i;
-
- layout->oobfree[0].offset = 2;
- layout->oobfree[0].length = mtd->oobsize - layout->eccbytes - 2;
+ mtd->ooblayout = &nand_ooblayout_lp_ops;
- chip->ecc.layout = layout;
return 0;
}
diff --git a/drivers/mtd/nand/lpc32xx_mlc.c b/drivers/mtd/nand/lpc32xx_mlc.c
index d8c3e7afcc0b..852388171f20 100644
--- a/drivers/mtd/nand/lpc32xx_mlc.c
+++ b/drivers/mtd/nand/lpc32xx_mlc.c
@@ -35,7 +35,6 @@
#include <linux/completion.h>
#include <linux/interrupt.h>
#include <linux/of.h>
-#include <linux/of_mtd.h>
#include <linux/of_gpio.h>
#include <linux/mtd/lpc32xx_mlc.h>
#include <linux/io.h>
@@ -139,22 +138,37 @@ struct lpc32xx_nand_cfg_mlc {
unsigned num_parts;
};
-static struct nand_ecclayout lpc32xx_nand_oob = {
- .eccbytes = 40,
- .eccpos = { 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
- 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
- 38, 39, 40, 41, 42, 43, 44, 45, 46, 47,
- 54, 55, 56, 57, 58, 59, 60, 61, 62, 63 },
- .oobfree = {
- { .offset = 0,
- .length = 6, },
- { .offset = 16,
- .length = 6, },
- { .offset = 32,
- .length = 6, },
- { .offset = 48,
- .length = 6, },
- },
+static int lpc32xx_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *nand_chip = mtd_to_nand(mtd);
+
+ if (section >= nand_chip->ecc.steps)
+ return -ERANGE;
+
+ oobregion->offset = ((section + 1) * 16) - nand_chip->ecc.bytes;
+ oobregion->length = nand_chip->ecc.bytes;
+
+ return 0;
+}
+
+static int lpc32xx_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *nand_chip = mtd_to_nand(mtd);
+
+ if (section >= nand_chip->ecc.steps)
+ return -ERANGE;
+
+ oobregion->offset = 16 * section;
+ oobregion->length = 16 - nand_chip->ecc.bytes;
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops lpc32xx_ooblayout_ops = {
+ .ecc = lpc32xx_ooblayout_ecc,
+ .free = lpc32xx_ooblayout_free,
};
static struct nand_bbt_descr lpc32xx_nand_bbt = {
@@ -713,6 +727,7 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
nand_chip->ecc.write_oob = lpc32xx_write_oob;
nand_chip->ecc.read_oob = lpc32xx_read_oob;
nand_chip->ecc.strength = 4;
+ nand_chip->ecc.bytes = 10;
nand_chip->waitfunc = lpc32xx_waitfunc;
nand_chip->options = NAND_NO_SUBPAGE_WRITE;
@@ -751,7 +766,7 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
nand_chip->ecc.mode = NAND_ECC_HW;
nand_chip->ecc.size = 512;
- nand_chip->ecc.layout = &lpc32xx_nand_oob;
+ mtd_set_ooblayout(mtd, &lpc32xx_ooblayout_ops);
host->mlcsubpages = mtd->writesize / 512;
/* initially clear interrupt status */
diff --git a/drivers/mtd/nand/lpc32xx_slc.c b/drivers/mtd/nand/lpc32xx_slc.c
index 3b8f3735f3e8..8d3edc34958e 100644
--- a/drivers/mtd/nand/lpc32xx_slc.c
+++ b/drivers/mtd/nand/lpc32xx_slc.c
@@ -35,7 +35,6 @@
#include <linux/mtd/nand_ecc.h>
#include <linux/gpio.h>
#include <linux/of.h>
-#include <linux/of_mtd.h>
#include <linux/of_gpio.h>
#include <linux/mtd/lpc32xx_slc.h>
@@ -146,13 +145,38 @@
* NAND ECC Layout for small page NAND devices
* Note: For large and huge page devices, the default layouts are used
*/
-static struct nand_ecclayout lpc32xx_nand_oob_16 = {
- .eccbytes = 6,
- .eccpos = {10, 11, 12, 13, 14, 15},
- .oobfree = {
- { .offset = 0, .length = 4 },
- { .offset = 6, .length = 4 },
- },
+static int lpc32xx_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section)
+ return -ERANGE;
+
+ oobregion->length = 6;
+ oobregion->offset = 10;
+
+ return 0;
+}
+
+static int lpc32xx_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section > 1)
+ return -ERANGE;
+
+ if (!section) {
+ oobregion->offset = 0;
+ oobregion->length = 4;
+ } else {
+ oobregion->offset = 6;
+ oobregion->length = 4;
+ }
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops lpc32xx_ooblayout_ops = {
+ .ecc = lpc32xx_ooblayout_ecc,
+ .free = lpc32xx_ooblayout_free,
};
static u8 bbt_pattern[] = {'B', 'b', 't', '0' };
@@ -194,7 +218,6 @@ struct lpc32xx_nand_cfg_slc {
uint32_t rwidth;
uint32_t rhold;
uint32_t rsetup;
- bool use_bbt;
int wp_gpio;
struct mtd_partition *parts;
unsigned num_parts;
@@ -604,7 +627,8 @@ static int lpc32xx_nand_read_page_syndrome(struct mtd_info *mtd,
int oob_required, int page)
{
struct lpc32xx_nand_host *host = nand_get_controller_data(chip);
- int stat, i, status;
+ struct mtd_oob_region oobregion = { };
+ int stat, i, status, error;
uint8_t *oobecc, tmpecc[LPC32XX_ECC_SAVE_SIZE];
/* Issue read command */
@@ -620,7 +644,11 @@ static int lpc32xx_nand_read_page_syndrome(struct mtd_info *mtd,
lpc32xx_slc_ecc_copy(tmpecc, (uint32_t *) host->ecc_buf, chip->ecc.steps);
/* Pointer to ECC data retrieved from NAND spare area */
- oobecc = chip->oob_poi + chip->ecc.layout->eccpos[0];
+ error = mtd_ooblayout_ecc(mtd, 0, &oobregion);
+ if (error)
+ return error;
+
+ oobecc = chip->oob_poi + oobregion.offset;
for (i = 0; i < chip->ecc.steps; i++) {
stat = chip->ecc.correct(mtd, buf, oobecc,
@@ -666,7 +694,8 @@ static int lpc32xx_nand_write_page_syndrome(struct mtd_info *mtd,
int oob_required, int page)
{
struct lpc32xx_nand_host *host = nand_get_controller_data(chip);
- uint8_t *pb = chip->oob_poi + chip->ecc.layout->eccpos[0];
+ struct mtd_oob_region oobregion = { };
+ uint8_t *pb;
int error;
/* Write data, calculate ECC on outbound data */
@@ -678,6 +707,11 @@ static int lpc32xx_nand_write_page_syndrome(struct mtd_info *mtd,
* The calculated ECC needs some manual work done to it before
* committing it to NAND. Process the calculated ECC and place
* the resultant values directly into the OOB buffer. */
+ error = mtd_ooblayout_ecc(mtd, 0, &oobregion);
+ if (error)
+ return error;
+
+ pb = chip->oob_poi + oobregion.offset;
lpc32xx_slc_ecc_copy(pb, (uint32_t *)host->ecc_buf, chip->ecc.steps);
/* Write ECC data to device */
@@ -747,7 +781,6 @@ static struct lpc32xx_nand_cfg_slc *lpc32xx_parse_dt(struct device *dev)
return NULL;
}
- ncfg->use_bbt = of_get_nand_on_flash_bbt(np);
ncfg->wp_gpio = of_get_named_gpio(np, "gpios", 0);
return ncfg;
@@ -875,26 +908,22 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
* custom BBT marker layout.
*/
if (mtd->writesize <= 512)
- chip->ecc.layout = &lpc32xx_nand_oob_16;
+ mtd_set_ooblayout(mtd, &lpc32xx_ooblayout_ops);
/* These sizes remain the same regardless of page size */
chip->ecc.size = 256;
chip->ecc.bytes = LPC32XX_SLC_DEV_ECC_BYTES;
chip->ecc.prepad = chip->ecc.postpad = 0;
- /* Avoid extra scan if using BBT, setup BBT support */
- if (host->ncfg->use_bbt) {
- chip->bbt_options |= NAND_BBT_USE_FLASH;
-
- /*
- * Use a custom BBT marker setup for small page FLASH that
- * won't interfere with the ECC layout. Large and huge page
- * FLASH use the standard layout.
- */
- if (mtd->writesize <= 512) {
- chip->bbt_td = &bbt_smallpage_main_descr;
- chip->bbt_md = &bbt_smallpage_mirror_descr;
- }
+ /*
+ * Use a custom BBT marker setup for small page FLASH that
+ * won't interfere with the ECC layout. Large and huge page
+ * FLASH use the standard layout.
+ */
+ if ((chip->bbt_options & NAND_BBT_USE_FLASH) &&
+ mtd->writesize <= 512) {
+ chip->bbt_td = &bbt_smallpage_main_descr;
+ chip->bbt_md = &bbt_smallpage_mirror_descr;
}
/*
diff --git a/drivers/mtd/nand/mpc5121_nfc.c b/drivers/mtd/nand/mpc5121_nfc.c
index 5d7843ffff6a..7eacb2f545f5 100644
--- a/drivers/mtd/nand/mpc5121_nfc.c
+++ b/drivers/mtd/nand/mpc5121_nfc.c
@@ -710,6 +710,7 @@ static int mpc5121_nfc_probe(struct platform_device *op)
chip->select_chip = mpc5121_nfc_select_chip;
chip->bbt_options = NAND_BBT_USE_FLASH;
chip->ecc.mode = NAND_ECC_SOFT;
+ chip->ecc.algo = NAND_ECC_HAMMING;
/* Support external chip-select logic on ADS5121 board */
if (of_machine_is_compatible("fsl,mpc5121ads")) {
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 854c832597aa..5173fadc9a4e 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -34,7 +34,6 @@
#include <linux/completion.h>
#include <linux/of.h>
#include <linux/of_device.h>
-#include <linux/of_mtd.h>
#include <asm/mach/flash.h>
#include <linux/platform_data/mtd-mxc_nand.h>
@@ -149,7 +148,7 @@ struct mxc_nand_devtype_data {
int (*check_int)(struct mxc_nand_host *);
void (*irq_control)(struct mxc_nand_host *, int);
u32 (*get_ecc_status)(struct mxc_nand_host *);
- struct nand_ecclayout *ecclayout_512, *ecclayout_2k, *ecclayout_4k;
+ const struct mtd_ooblayout_ops *ooblayout;
void (*select_chip)(struct mtd_info *mtd, int chip);
int (*correct_data)(struct mtd_info *mtd, u_char *dat,
u_char *read_ecc, u_char *calc_ecc);
@@ -200,73 +199,6 @@ struct mxc_nand_host {
struct mxc_nand_platform_data pdata;
};
-/* OOB placement block for use with hardware ecc generation */
-static struct nand_ecclayout nandv1_hw_eccoob_smallpage = {
- .eccbytes = 5,
- .eccpos = {6, 7, 8, 9, 10},
- .oobfree = {{0, 5}, {12, 4}, }
-};
-
-static struct nand_ecclayout nandv1_hw_eccoob_largepage = {
- .eccbytes = 20,
- .eccpos = {6, 7, 8, 9, 10, 22, 23, 24, 25, 26,
- 38, 39, 40, 41, 42, 54, 55, 56, 57, 58},
- .oobfree = {{2, 4}, {11, 10}, {27, 10}, {43, 10}, {59, 5}, }
-};
-
-/* OOB description for 512 byte pages with 16 byte OOB */
-static struct nand_ecclayout nandv2_hw_eccoob_smallpage = {
- .eccbytes = 1 * 9,
- .eccpos = {
- 7, 8, 9, 10, 11, 12, 13, 14, 15
- },
- .oobfree = {
- {.offset = 0, .length = 5}
- }
-};
-
-/* OOB description for 2048 byte pages with 64 byte OOB */
-static struct nand_ecclayout nandv2_hw_eccoob_largepage = {
- .eccbytes = 4 * 9,
- .eccpos = {
- 7, 8, 9, 10, 11, 12, 13, 14, 15,
- 23, 24, 25, 26, 27, 28, 29, 30, 31,
- 39, 40, 41, 42, 43, 44, 45, 46, 47,
- 55, 56, 57, 58, 59, 60, 61, 62, 63
- },
- .oobfree = {
- {.offset = 2, .length = 4},
- {.offset = 16, .length = 7},
- {.offset = 32, .length = 7},
- {.offset = 48, .length = 7}
- }
-};
-
-/* OOB description for 4096 byte pages with 128 byte OOB */
-static struct nand_ecclayout nandv2_hw_eccoob_4k = {
- .eccbytes = 8 * 9,
- .eccpos = {
- 7, 8, 9, 10, 11, 12, 13, 14, 15,
- 23, 24, 25, 26, 27, 28, 29, 30, 31,
- 39, 40, 41, 42, 43, 44, 45, 46, 47,
- 55, 56, 57, 58, 59, 60, 61, 62, 63,
- 71, 72, 73, 74, 75, 76, 77, 78, 79,
- 87, 88, 89, 90, 91, 92, 93, 94, 95,
- 103, 104, 105, 106, 107, 108, 109, 110, 111,
- 119, 120, 121, 122, 123, 124, 125, 126, 127,
- },
- .oobfree = {
- {.offset = 2, .length = 4},
- {.offset = 16, .length = 7},
- {.offset = 32, .length = 7},
- {.offset = 48, .length = 7},
- {.offset = 64, .length = 7},
- {.offset = 80, .length = 7},
- {.offset = 96, .length = 7},
- {.offset = 112, .length = 7},
- }
-};
-
static const char * const part_probes[] = {
"cmdlinepart", "RedBoot", "ofpart", NULL };
@@ -942,6 +874,99 @@ static void mxc_do_addr_cycle(struct mtd_info *mtd, int column, int page_addr)
}
}
+static int mxc_v1_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *nand_chip = mtd_to_nand(mtd);
+
+ if (section >= nand_chip->ecc.steps)
+ return -ERANGE;
+
+ oobregion->offset = (section * 16) + 6;
+ oobregion->length = nand_chip->ecc.bytes;
+
+ return 0;
+}
+
+static int mxc_v1_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *nand_chip = mtd_to_nand(mtd);
+
+ if (section > nand_chip->ecc.steps)
+ return -ERANGE;
+
+ if (!section) {
+ if (mtd->writesize <= 512) {
+ oobregion->offset = 0;
+ oobregion->length = 5;
+ } else {
+ oobregion->offset = 2;
+ oobregion->length = 4;
+ }
+ } else {
+ oobregion->offset = ((section - 1) * 16) +
+ nand_chip->ecc.bytes + 6;
+ if (section < nand_chip->ecc.steps)
+ oobregion->length = (section * 16) + 6 -
+ oobregion->offset;
+ else
+ oobregion->length = mtd->oobsize - oobregion->offset;
+ }
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops mxc_v1_ooblayout_ops = {
+ .ecc = mxc_v1_ooblayout_ecc,
+ .free = mxc_v1_ooblayout_free,
+};
+
+static int mxc_v2_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *nand_chip = mtd_to_nand(mtd);
+ int stepsize = nand_chip->ecc.bytes == 9 ? 16 : 26;
+
+ if (section >= nand_chip->ecc.steps)
+ return -ERANGE;
+
+ oobregion->offset = (section * stepsize) + 7;
+ oobregion->length = nand_chip->ecc.bytes;
+
+ return 0;
+}
+
+static int mxc_v2_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *nand_chip = mtd_to_nand(mtd);
+ int stepsize = nand_chip->ecc.bytes == 9 ? 16 : 26;
+
+ if (section > nand_chip->ecc.steps)
+ return -ERANGE;
+
+ if (!section) {
+ if (mtd->writesize <= 512) {
+ oobregion->offset = 0;
+ oobregion->length = 5;
+ } else {
+ oobregion->offset = 2;
+ oobregion->length = 4;
+ }
+ } else {
+ oobregion->offset = section * stepsize;
+ oobregion->length = 7;
+ }
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops mxc_v2_ooblayout_ops = {
+ .ecc = mxc_v2_ooblayout_ecc,
+ .free = mxc_v2_ooblayout_free,
+};
+
/*
* v2 and v3 type controllers can do 4bit or 8bit ecc depending
* on how much oob the nand chip has. For 8bit ecc we need at least
@@ -959,23 +984,6 @@ static int get_eccsize(struct mtd_info *mtd)
return 8;
}
-static void ecc_8bit_layout_4k(struct nand_ecclayout *layout)
-{
- int i, j;
-
- layout->eccbytes = 8*18;
- for (i = 0; i < 8; i++)
- for (j = 0; j < 18; j++)
- layout->eccpos[i*18 + j] = i*26 + j + 7;
-
- layout->oobfree[0].offset = 2;
- layout->oobfree[0].length = 4;
- for (i = 1; i < 8; i++) {
- layout->oobfree[i].offset = i*26;
- layout->oobfree[i].length = 7;
- }
-}
-
static void preset_v1(struct mtd_info *mtd)
{
struct nand_chip *nand_chip = mtd_to_nand(mtd);
@@ -1269,9 +1277,7 @@ static const struct mxc_nand_devtype_data imx21_nand_devtype_data = {
.check_int = check_int_v1_v2,
.irq_control = irq_control_v1_v2,
.get_ecc_status = get_ecc_status_v1,
- .ecclayout_512 = &nandv1_hw_eccoob_smallpage,
- .ecclayout_2k = &nandv1_hw_eccoob_largepage,
- .ecclayout_4k = &nandv1_hw_eccoob_smallpage, /* XXX: needs fix */
+ .ooblayout = &mxc_v1_ooblayout_ops,
.select_chip = mxc_nand_select_chip_v1_v3,
.correct_data = mxc_nand_correct_data_v1,
.irqpending_quirk = 1,
@@ -1294,9 +1300,7 @@ static const struct mxc_nand_devtype_data imx27_nand_devtype_data = {
.check_int = check_int_v1_v2,
.irq_control = irq_control_v1_v2,
.get_ecc_status = get_ecc_status_v1,
- .ecclayout_512 = &nandv1_hw_eccoob_smallpage,
- .ecclayout_2k = &nandv1_hw_eccoob_largepage,
- .ecclayout_4k = &nandv1_hw_eccoob_smallpage, /* XXX: needs fix */
+ .ooblayout = &mxc_v1_ooblayout_ops,
.select_chip = mxc_nand_select_chip_v1_v3,
.correct_data = mxc_nand_correct_data_v1,
.irqpending_quirk = 0,
@@ -1320,9 +1324,7 @@ static const struct mxc_nand_devtype_data imx25_nand_devtype_data = {
.check_int = check_int_v1_v2,
.irq_control = irq_control_v1_v2,
.get_ecc_status = get_ecc_status_v2,
- .ecclayout_512 = &nandv2_hw_eccoob_smallpage,
- .ecclayout_2k = &nandv2_hw_eccoob_largepage,
- .ecclayout_4k = &nandv2_hw_eccoob_4k,
+ .ooblayout = &mxc_v2_ooblayout_ops,
.select_chip = mxc_nand_select_chip_v2,
.correct_data = mxc_nand_correct_data_v2_v3,
.irqpending_quirk = 0,
@@ -1346,9 +1348,7 @@ static const struct mxc_nand_devtype_data imx51_nand_devtype_data = {
.check_int = check_int_v3,
.irq_control = irq_control_v3,
.get_ecc_status = get_ecc_status_v3,
- .ecclayout_512 = &nandv2_hw_eccoob_smallpage,
- .ecclayout_2k = &nandv2_hw_eccoob_largepage,
- .ecclayout_4k = &nandv2_hw_eccoob_smallpage, /* XXX: needs fix */
+ .ooblayout = &mxc_v2_ooblayout_ops,
.select_chip = mxc_nand_select_chip_v1_v3,
.correct_data = mxc_nand_correct_data_v2_v3,
.irqpending_quirk = 0,
@@ -1373,9 +1373,7 @@ static const struct mxc_nand_devtype_data imx53_nand_devtype_data = {
.check_int = check_int_v3,
.irq_control = irq_control_v3,
.get_ecc_status = get_ecc_status_v3,
- .ecclayout_512 = &nandv2_hw_eccoob_smallpage,
- .ecclayout_2k = &nandv2_hw_eccoob_largepage,
- .ecclayout_4k = &nandv2_hw_eccoob_smallpage, /* XXX: needs fix */
+ .ooblayout = &mxc_v2_ooblayout_ops,
.select_chip = mxc_nand_select_chip_v1_v3,
.correct_data = mxc_nand_correct_data_v2_v3,
.irqpending_quirk = 0,
@@ -1461,25 +1459,12 @@ MODULE_DEVICE_TABLE(of, mxcnd_dt_ids);
static int __init mxcnd_probe_dt(struct mxc_nand_host *host)
{
struct device_node *np = host->dev->of_node;
- struct mxc_nand_platform_data *pdata = &host->pdata;
const struct of_device_id *of_id =
of_match_device(mxcnd_dt_ids, host->dev);
- int buswidth;
if (!np)
return 1;
- if (of_get_nand_ecc_mode(np) >= 0)
- pdata->hw_ecc = 1;
-
- pdata->flash_bbt = of_get_nand_on_flash_bbt(np);
-
- buswidth = of_get_nand_bus_width(np);
- if (buswidth < 0)
- return buswidth;
-
- pdata->width = buswidth / 8;
-
host->devtype_data = of_id->data;
return 0;
@@ -1576,27 +1561,22 @@ static int mxcnd_probe(struct platform_device *pdev)
this->select_chip = host->devtype_data->select_chip;
this->ecc.size = 512;
- this->ecc.layout = host->devtype_data->ecclayout_512;
+ mtd_set_ooblayout(mtd, host->devtype_data->ooblayout);
if (host->pdata.hw_ecc) {
- this->ecc.calculate = mxc_nand_calculate_ecc;
- this->ecc.hwctl = mxc_nand_enable_hwecc;
- this->ecc.correct = host->devtype_data->correct_data;
this->ecc.mode = NAND_ECC_HW;
} else {
this->ecc.mode = NAND_ECC_SOFT;
+ this->ecc.algo = NAND_ECC_HAMMING;
}
/* NAND bus width determines access functions used by upper layer */
if (host->pdata.width == 2)
this->options |= NAND_BUSWIDTH_16;
- if (host->pdata.flash_bbt) {
- this->bbt_td = &bbt_main_descr;
- this->bbt_md = &bbt_mirror_descr;
- /* update flash based bbt */
+ /* update flash based bbt */
+ if (host->pdata.flash_bbt)
this->bbt_options |= NAND_BBT_USE_FLASH;
- }
init_completion(&host->op_completion);
@@ -1637,6 +1617,26 @@ static int mxcnd_probe(struct platform_device *pdev)
goto escan;
}
+ switch (this->ecc.mode) {
+ case NAND_ECC_HW:
+ this->ecc.calculate = mxc_nand_calculate_ecc;
+ this->ecc.hwctl = mxc_nand_enable_hwecc;
+ this->ecc.correct = host->devtype_data->correct_data;
+ break;
+
+ case NAND_ECC_SOFT:
+ break;
+
+ default:
+ err = -EINVAL;
+ goto escan;
+ }
+
+ if (this->bbt_options & NAND_BBT_USE_FLASH) {
+ this->bbt_td = &bbt_main_descr;
+ this->bbt_md = &bbt_mirror_descr;
+ }
+
/* allocate the right size buffer now */
devm_kfree(&pdev->dev, (void *)host->data_buf);
host->data_buf = devm_kzalloc(&pdev->dev, mtd->writesize + mtd->oobsize,
@@ -1649,12 +1649,11 @@ static int mxcnd_probe(struct platform_device *pdev)
/* Call preset again, with correct writesize this time */
host->devtype_data->preset(mtd);
- if (mtd->writesize == 2048)
- this->ecc.layout = host->devtype_data->ecclayout_2k;
- else if (mtd->writesize == 4096) {
- this->ecc.layout = host->devtype_data->ecclayout_4k;
- if (get_eccsize(mtd) == 8)
- ecc_8bit_layout_4k(this->ecc.layout);
+ if (!this->ecc.bytes) {
+ if (host->eccsize == 8)
+ this->ecc.bytes = 18;
+ else if (host->eccsize == 4)
+ this->ecc.bytes = 9;
}
/*
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index ba4f603e0537..0b0dc29d2af7 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -45,56 +45,98 @@
#include <linux/bitops.h>
#include <linux/io.h>
#include <linux/mtd/partitions.h>
-#include <linux/of_mtd.h>
+#include <linux/of.h>
+
+static int nand_get_device(struct mtd_info *mtd, int new_state);
+
+static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
+ struct mtd_oob_ops *ops);
/* Define default oob placement schemes for large and small page devices */
-static struct nand_ecclayout nand_oob_8 = {
- .eccbytes = 3,
- .eccpos = {0, 1, 2},
- .oobfree = {
- {.offset = 3,
- .length = 2},
- {.offset = 6,
- .length = 2} }
-};
+static int nand_ooblayout_ecc_sp(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
-static struct nand_ecclayout nand_oob_16 = {
- .eccbytes = 6,
- .eccpos = {0, 1, 2, 3, 6, 7},
- .oobfree = {
- {.offset = 8,
- . length = 8} }
-};
+ if (section > 1)
+ return -ERANGE;
-static struct nand_ecclayout nand_oob_64 = {
- .eccbytes = 24,
- .eccpos = {
- 40, 41, 42, 43, 44, 45, 46, 47,
- 48, 49, 50, 51, 52, 53, 54, 55,
- 56, 57, 58, 59, 60, 61, 62, 63},
- .oobfree = {
- {.offset = 2,
- .length = 38} }
-};
+ if (!section) {
+ oobregion->offset = 0;
+ oobregion->length = 4;
+ } else {
+ oobregion->offset = 6;
+ oobregion->length = ecc->total - 4;
+ }
+
+ return 0;
+}
+
+static int nand_ooblayout_free_sp(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section > 1)
+ return -ERANGE;
+
+ if (mtd->oobsize == 16) {
+ if (section)
+ return -ERANGE;
+
+ oobregion->length = 8;
+ oobregion->offset = 8;
+ } else {
+ oobregion->length = 2;
+ if (!section)
+ oobregion->offset = 3;
+ else
+ oobregion->offset = 6;
+ }
+
+ return 0;
+}
-static struct nand_ecclayout nand_oob_128 = {
- .eccbytes = 48,
- .eccpos = {
- 80, 81, 82, 83, 84, 85, 86, 87,
- 88, 89, 90, 91, 92, 93, 94, 95,
- 96, 97, 98, 99, 100, 101, 102, 103,
- 104, 105, 106, 107, 108, 109, 110, 111,
- 112, 113, 114, 115, 116, 117, 118, 119,
- 120, 121, 122, 123, 124, 125, 126, 127},
- .oobfree = {
- {.offset = 2,
- .length = 78} }
+const struct mtd_ooblayout_ops nand_ooblayout_sp_ops = {
+ .ecc = nand_ooblayout_ecc_sp,
+ .free = nand_ooblayout_free_sp,
};
+EXPORT_SYMBOL_GPL(nand_ooblayout_sp_ops);
-static int nand_get_device(struct mtd_info *mtd, int new_state);
+static int nand_ooblayout_ecc_lp(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
-static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
- struct mtd_oob_ops *ops);
+ if (section)
+ return -ERANGE;
+
+ oobregion->length = ecc->total;
+ oobregion->offset = mtd->oobsize - oobregion->length;
+
+ return 0;
+}
+
+static int nand_ooblayout_free_lp(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+
+ if (section)
+ return -ERANGE;
+
+ oobregion->length = mtd->oobsize - ecc->total - 2;
+ oobregion->offset = 2;
+
+ return 0;
+}
+
+const struct mtd_ooblayout_ops nand_ooblayout_lp_ops = {
+ .ecc = nand_ooblayout_ecc_lp,
+ .free = nand_ooblayout_free_lp,
+};
+EXPORT_SYMBOL_GPL(nand_ooblayout_lp_ops);
static int check_offs_len(struct mtd_info *mtd,
loff_t ofs, uint64_t len)
@@ -1279,13 +1321,12 @@ static int nand_read_page_raw_syndrome(struct mtd_info *mtd,
static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *buf, int oob_required, int page)
{
- int i, eccsize = chip->ecc.size;
+ int i, eccsize = chip->ecc.size, ret;
int eccbytes = chip->ecc.bytes;
int eccsteps = chip->ecc.steps;
uint8_t *p = buf;
uint8_t *ecc_calc = chip->buffers->ecccalc;
uint8_t *ecc_code = chip->buffers->ecccode;
- uint32_t *eccpos = chip->ecc.layout->eccpos;
unsigned int max_bitflips = 0;
chip->ecc.read_page_raw(mtd, chip, buf, 1, page);
@@ -1293,8 +1334,10 @@ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize)
chip->ecc.calculate(mtd, p, &ecc_calc[i]);
- for (i = 0; i < chip->ecc.total; i++)
- ecc_code[i] = chip->oob_poi[eccpos[i]];
+ ret = mtd_ooblayout_get_eccbytes(mtd, ecc_code, chip->oob_poi, 0,
+ chip->ecc.total);
+ if (ret)
+ return ret;
eccsteps = chip->ecc.steps;
p = buf;
@@ -1326,14 +1369,14 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi,
int page)
{
- int start_step, end_step, num_steps;
- uint32_t *eccpos = chip->ecc.layout->eccpos;
+ int start_step, end_step, num_steps, ret;
uint8_t *p;
int data_col_addr, i, gaps = 0;
int datafrag_len, eccfrag_len, aligned_len, aligned_pos;
int busw = (chip->options & NAND_BUSWIDTH_16) ? 2 : 1;
- int index;
+ int index, section = 0;
unsigned int max_bitflips = 0;
+ struct mtd_oob_region oobregion = { };
/* Column address within the page aligned to ECC size (256bytes) */
start_step = data_offs / chip->ecc.size;
@@ -1361,12 +1404,13 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
* The performance is faster if we position offsets according to
* ecc.pos. Let's make sure that there are no gaps in ECC positions.
*/
- for (i = 0; i < eccfrag_len - 1; i++) {
- if (eccpos[i + index] + 1 != eccpos[i + index + 1]) {
- gaps = 1;
- break;
- }
- }
+ ret = mtd_ooblayout_find_eccregion(mtd, index, &section, &oobregion);
+ if (ret)
+ return ret;
+
+ if (oobregion.length < eccfrag_len)
+ gaps = 1;
+
if (gaps) {
chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1);
chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
@@ -1375,20 +1419,23 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
* Send the command to read the particular ECC bytes take care
* about buswidth alignment in read_buf.
*/
- aligned_pos = eccpos[index] & ~(busw - 1);
+ aligned_pos = oobregion.offset & ~(busw - 1);
aligned_len = eccfrag_len;
- if (eccpos[index] & (busw - 1))
+ if (oobregion.offset & (busw - 1))
aligned_len++;
- if (eccpos[index + (num_steps * chip->ecc.bytes)] & (busw - 1))
+ if ((oobregion.offset + (num_steps * chip->ecc.bytes)) &
+ (busw - 1))
aligned_len++;
chip->cmdfunc(mtd, NAND_CMD_RNDOUT,
- mtd->writesize + aligned_pos, -1);
+ mtd->writesize + aligned_pos, -1);
chip->read_buf(mtd, &chip->oob_poi[aligned_pos], aligned_len);
}
- for (i = 0; i < eccfrag_len; i++)
- chip->buffers->ecccode[i] = chip->oob_poi[eccpos[i + index]];
+ ret = mtd_ooblayout_get_eccbytes(mtd, chip->buffers->ecccode,
+ chip->oob_poi, index, eccfrag_len);
+ if (ret)
+ return ret;
p = bufpoi + data_col_addr;
for (i = 0; i < eccfrag_len ; i += chip->ecc.bytes, p += chip->ecc.size) {
@@ -1429,13 +1476,12 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *buf, int oob_required, int page)
{
- int i, eccsize = chip->ecc.size;
+ int i, eccsize = chip->ecc.size, ret;
int eccbytes = chip->ecc.bytes;
int eccsteps = chip->ecc.steps;
uint8_t *p = buf;
uint8_t *ecc_calc = chip->buffers->ecccalc;
uint8_t *ecc_code = chip->buffers->ecccode;
- uint32_t *eccpos = chip->ecc.layout->eccpos;
unsigned int max_bitflips = 0;
for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
@@ -1445,8 +1491,10 @@ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
}
chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
- for (i = 0; i < chip->ecc.total; i++)
- ecc_code[i] = chip->oob_poi[eccpos[i]];
+ ret = mtd_ooblayout_get_eccbytes(mtd, ecc_code, chip->oob_poi, 0,
+ chip->ecc.total);
+ if (ret)
+ return ret;
eccsteps = chip->ecc.steps;
p = buf;
@@ -1491,12 +1539,11 @@ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd,
struct nand_chip *chip, uint8_t *buf, int oob_required, int page)
{
- int i, eccsize = chip->ecc.size;
+ int i, eccsize = chip->ecc.size, ret;
int eccbytes = chip->ecc.bytes;
int eccsteps = chip->ecc.steps;
uint8_t *p = buf;
uint8_t *ecc_code = chip->buffers->ecccode;
- uint32_t *eccpos = chip->ecc.layout->eccpos;
uint8_t *ecc_calc = chip->buffers->ecccalc;
unsigned int max_bitflips = 0;
@@ -1505,8 +1552,10 @@ static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd,
chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
- for (i = 0; i < chip->ecc.total; i++)
- ecc_code[i] = chip->oob_poi[eccpos[i]];
+ ret = mtd_ooblayout_get_eccbytes(mtd, ecc_code, chip->oob_poi, 0,
+ chip->ecc.total);
+ if (ret)
+ return ret;
for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
int stat;
@@ -1607,14 +1656,17 @@ static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
/**
* nand_transfer_oob - [INTERN] Transfer oob to client buffer
- * @chip: nand chip structure
+ * @mtd: mtd info structure
* @oob: oob destination address
* @ops: oob ops structure
* @len: size of oob to transfer
*/
-static uint8_t *nand_transfer_oob(struct nand_chip *chip, uint8_t *oob,
+static uint8_t *nand_transfer_oob(struct mtd_info *mtd, uint8_t *oob,
struct mtd_oob_ops *ops, size_t len)
{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ int ret;
+
switch (ops->mode) {
case MTD_OPS_PLACE_OOB:
@@ -1622,31 +1674,12 @@ static uint8_t *nand_transfer_oob(struct nand_chip *chip, uint8_t *oob,
memcpy(oob, chip->oob_poi + ops->ooboffs, len);
return oob + len;
- case MTD_OPS_AUTO_OOB: {
- struct nand_oobfree *free = chip->ecc.layout->oobfree;
- uint32_t boffs = 0, roffs = ops->ooboffs;
- size_t bytes = 0;
-
- for (; free->length && len; free++, len -= bytes) {
- /* Read request not from offset 0? */
- if (unlikely(roffs)) {
- if (roffs >= free->length) {
- roffs -= free->length;
- continue;
- }
- boffs = free->offset + roffs;
- bytes = min_t(size_t, len,
- (free->length - roffs));
- roffs = 0;
- } else {
- bytes = min_t(size_t, len, free->length);
- boffs = free->offset;
- }
- memcpy(oob, chip->oob_poi + boffs, bytes);
- oob += bytes;
- }
- return oob;
- }
+ case MTD_OPS_AUTO_OOB:
+ ret = mtd_ooblayout_get_databytes(mtd, oob, chip->oob_poi,
+ ops->ooboffs, len);
+ BUG_ON(ret);
+ return oob + len;
+
default:
BUG();
}
@@ -1780,7 +1813,7 @@ read_retry:
int toread = min(oobreadlen, max_oobsize);
if (toread) {
- oob = nand_transfer_oob(chip,
+ oob = nand_transfer_oob(mtd,
oob, ops, toread);
oobreadlen -= toread;
}
@@ -1893,13 +1926,13 @@ static int nand_read(struct mtd_info *mtd, loff_t from, size_t len,
* @chip: nand chip info structure
* @page: page number to read
*/
-static int nand_read_oob_std(struct mtd_info *mtd, struct nand_chip *chip,
- int page)
+int nand_read_oob_std(struct mtd_info *mtd, struct nand_chip *chip, int page)
{
chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
return 0;
}
+EXPORT_SYMBOL(nand_read_oob_std);
/**
* nand_read_oob_syndrome - [REPLACEABLE] OOB data read function for HW ECC
@@ -1908,8 +1941,8 @@ static int nand_read_oob_std(struct mtd_info *mtd, struct nand_chip *chip,
* @chip: nand chip info structure
* @page: page number to read
*/
-static int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
- int page)
+int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
+ int page)
{
int length = mtd->oobsize;
int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad;
@@ -1937,6 +1970,7 @@ static int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
return 0;
}
+EXPORT_SYMBOL(nand_read_oob_syndrome);
/**
* nand_write_oob_std - [REPLACEABLE] the most common OOB data write function
@@ -1944,8 +1978,7 @@ static int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
* @chip: nand chip info structure
* @page: page number to write
*/
-static int nand_write_oob_std(struct mtd_info *mtd, struct nand_chip *chip,
- int page)
+int nand_write_oob_std(struct mtd_info *mtd, struct nand_chip *chip, int page)
{
int status = 0;
const uint8_t *buf = chip->oob_poi;
@@ -1960,6 +1993,7 @@ static int nand_write_oob_std(struct mtd_info *mtd, struct nand_chip *chip,
return status & NAND_STATUS_FAIL ? -EIO : 0;
}
+EXPORT_SYMBOL(nand_write_oob_std);
/**
* nand_write_oob_syndrome - [REPLACEABLE] OOB data write function for HW ECC
@@ -1968,8 +2002,8 @@ static int nand_write_oob_std(struct mtd_info *mtd, struct nand_chip *chip,
* @chip: nand chip info structure
* @page: page number to write
*/
-static int nand_write_oob_syndrome(struct mtd_info *mtd,
- struct nand_chip *chip, int page)
+int nand_write_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
+ int page)
{
int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad;
int eccsize = chip->ecc.size, length = mtd->oobsize;
@@ -2019,6 +2053,7 @@ static int nand_write_oob_syndrome(struct mtd_info *mtd,
return status & NAND_STATUS_FAIL ? -EIO : 0;
}
+EXPORT_SYMBOL(nand_write_oob_syndrome);
/**
* nand_do_read_oob - [INTERN] NAND read out-of-band
@@ -2078,7 +2113,7 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
break;
len = min(len, readlen);
- buf = nand_transfer_oob(chip, buf, ops, len);
+ buf = nand_transfer_oob(mtd, buf, ops, len);
if (chip->options & NAND_NEED_READRDY) {
/* Apply delay or wait for ready/busy pin */
@@ -2237,19 +2272,20 @@ static int nand_write_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf, int oob_required,
int page)
{
- int i, eccsize = chip->ecc.size;
+ int i, eccsize = chip->ecc.size, ret;
int eccbytes = chip->ecc.bytes;
int eccsteps = chip->ecc.steps;
uint8_t *ecc_calc = chip->buffers->ecccalc;
const uint8_t *p = buf;
- uint32_t *eccpos = chip->ecc.layout->eccpos;
/* Software ECC calculation */
for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize)
chip->ecc.calculate(mtd, p, &ecc_calc[i]);
- for (i = 0; i < chip->ecc.total; i++)
- chip->oob_poi[eccpos[i]] = ecc_calc[i];
+ ret = mtd_ooblayout_set_eccbytes(mtd, ecc_calc, chip->oob_poi, 0,
+ chip->ecc.total);
+ if (ret)
+ return ret;
return chip->ecc.write_page_raw(mtd, chip, buf, 1, page);
}
@@ -2266,12 +2302,11 @@ static int nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf, int oob_required,
int page)
{
- int i, eccsize = chip->ecc.size;
+ int i, eccsize = chip->ecc.size, ret;
int eccbytes = chip->ecc.bytes;
int eccsteps = chip->ecc.steps;
uint8_t *ecc_calc = chip->buffers->ecccalc;
const uint8_t *p = buf;
- uint32_t *eccpos = chip->ecc.layout->eccpos;
for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
chip->ecc.hwctl(mtd, NAND_ECC_WRITE);
@@ -2279,8 +2314,10 @@ static int nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
chip->ecc.calculate(mtd, p, &ecc_calc[i]);
}
- for (i = 0; i < chip->ecc.total; i++)
- chip->oob_poi[eccpos[i]] = ecc_calc[i];
+ ret = mtd_ooblayout_set_eccbytes(mtd, ecc_calc, chip->oob_poi, 0,
+ chip->ecc.total);
+ if (ret)
+ return ret;
chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
@@ -2308,11 +2345,10 @@ static int nand_write_subpage_hwecc(struct mtd_info *mtd,
int ecc_size = chip->ecc.size;
int ecc_bytes = chip->ecc.bytes;
int ecc_steps = chip->ecc.steps;
- uint32_t *eccpos = chip->ecc.layout->eccpos;
uint32_t start_step = offset / ecc_size;
uint32_t end_step = (offset + data_len - 1) / ecc_size;
int oob_bytes = mtd->oobsize / ecc_steps;
- int step, i;
+ int step, ret;
for (step = 0; step < ecc_steps; step++) {
/* configure controller for WRITE access */
@@ -2340,8 +2376,10 @@ static int nand_write_subpage_hwecc(struct mtd_info *mtd,
/* copy calculated ECC for whole page to chip->buffer->oob */
/* this include masked-value(0xFF) for unwritten subpages */
ecc_calc = chip->buffers->ecccalc;
- for (i = 0; i < chip->ecc.total; i++)
- chip->oob_poi[eccpos[i]] = ecc_calc[i];
+ ret = mtd_ooblayout_set_eccbytes(mtd, ecc_calc, chip->oob_poi, 0,
+ chip->ecc.total);
+ if (ret)
+ return ret;
/* write OOB buffer to NAND device */
chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
@@ -2478,6 +2516,7 @@ static uint8_t *nand_fill_oob(struct mtd_info *mtd, uint8_t *oob, size_t len,
struct mtd_oob_ops *ops)
{
struct nand_chip *chip = mtd_to_nand(mtd);
+ int ret;
/*
* Initialise to all 0xFF, to avoid the possibility of left over OOB
@@ -2492,31 +2531,12 @@ static uint8_t *nand_fill_oob(struct mtd_info *mtd, uint8_t *oob, size_t len,
memcpy(chip->oob_poi + ops->ooboffs, oob, len);
return oob + len;
- case MTD_OPS_AUTO_OOB: {
- struct nand_oobfree *free = chip->ecc.layout->oobfree;
- uint32_t boffs = 0, woffs = ops->ooboffs;
- size_t bytes = 0;
-
- for (; free->length && len; free++, len -= bytes) {
- /* Write request not from offset 0? */
- if (unlikely(woffs)) {
- if (woffs >= free->length) {
- woffs -= free->length;
- continue;
- }
- boffs = free->offset + woffs;
- bytes = min_t(size_t, len,
- (free->length - woffs));
- woffs = 0;
- } else {
- bytes = min_t(size_t, len, free->length);
- boffs = free->offset;
- }
- memcpy(chip->oob_poi + boffs, oob, bytes);
- oob += bytes;
- }
- return oob;
- }
+ case MTD_OPS_AUTO_OOB:
+ ret = mtd_ooblayout_set_databytes(mtd, oob, chip->oob_poi,
+ ops->ooboffs, len);
+ BUG_ON(ret);
+ return oob + len;
+
default:
BUG();
}
@@ -3951,10 +3971,115 @@ ident_done:
return type;
}
+static const char * const nand_ecc_modes[] = {
+ [NAND_ECC_NONE] = "none",
+ [NAND_ECC_SOFT] = "soft",
+ [NAND_ECC_HW] = "hw",
+ [NAND_ECC_HW_SYNDROME] = "hw_syndrome",
+ [NAND_ECC_HW_OOB_FIRST] = "hw_oob_first",
+};
+
+static int of_get_nand_ecc_mode(struct device_node *np)
+{
+ const char *pm;
+ int err, i;
+
+ err = of_property_read_string(np, "nand-ecc-mode", &pm);
+ if (err < 0)
+ return err;
+
+ for (i = 0; i < ARRAY_SIZE(nand_ecc_modes); i++)
+ if (!strcasecmp(pm, nand_ecc_modes[i]))
+ return i;
+
+ /*
+ * For backward compatibility we support few obsoleted values that don't
+ * have their mappings into nand_ecc_modes_t anymore (they were merged
+ * with other enums).
+ */
+ if (!strcasecmp(pm, "soft_bch"))
+ return NAND_ECC_SOFT;
+
+ return -ENODEV;
+}
+
+static const char * const nand_ecc_algos[] = {
+ [NAND_ECC_HAMMING] = "hamming",
+ [NAND_ECC_BCH] = "bch",
+};
+
+static int of_get_nand_ecc_algo(struct device_node *np)
+{
+ const char *pm;
+ int err, i;
+
+ err = of_property_read_string(np, "nand-ecc-algo", &pm);
+ if (!err) {
+ for (i = NAND_ECC_HAMMING; i < ARRAY_SIZE(nand_ecc_algos); i++)
+ if (!strcasecmp(pm, nand_ecc_algos[i]))
+ return i;
+ return -ENODEV;
+ }
+
+ /*
+ * For backward compatibility we also read "nand-ecc-mode" checking
+ * for some obsoleted values that were specifying ECC algorithm.
+ */
+ err = of_property_read_string(np, "nand-ecc-mode", &pm);
+ if (err < 0)
+ return err;
+
+ if (!strcasecmp(pm, "soft"))
+ return NAND_ECC_HAMMING;
+ else if (!strcasecmp(pm, "soft_bch"))
+ return NAND_ECC_BCH;
+
+ return -ENODEV;
+}
+
+static int of_get_nand_ecc_step_size(struct device_node *np)
+{
+ int ret;
+ u32 val;
+
+ ret = of_property_read_u32(np, "nand-ecc-step-size", &val);
+ return ret ? ret : val;
+}
+
+static int of_get_nand_ecc_strength(struct device_node *np)
+{
+ int ret;
+ u32 val;
+
+ ret = of_property_read_u32(np, "nand-ecc-strength", &val);
+ return ret ? ret : val;
+}
+
+static int of_get_nand_bus_width(struct device_node *np)
+{
+ u32 val;
+
+ if (of_property_read_u32(np, "nand-bus-width", &val))
+ return 8;
+
+ switch (val) {
+ case 8:
+ case 16:
+ return val;
+ default:
+ return -EIO;
+ }
+}
+
+static bool of_get_nand_on_flash_bbt(struct device_node *np)
+{
+ return of_property_read_bool(np, "nand-on-flash-bbt");
+}
+
static int nand_dt_init(struct nand_chip *chip)
{
struct device_node *dn = nand_get_flash_node(chip);
- int ecc_mode, ecc_strength, ecc_step;
+ int ecc_mode, ecc_algo, ecc_strength, ecc_step;
if (!dn)
return 0;
@@ -3966,6 +4091,7 @@ static int nand_dt_init(struct nand_chip *chip)
chip->bbt_options |= NAND_BBT_USE_FLASH;
ecc_mode = of_get_nand_ecc_mode(dn);
+ ecc_algo = of_get_nand_ecc_algo(dn);
ecc_strength = of_get_nand_ecc_strength(dn);
ecc_step = of_get_nand_ecc_step_size(dn);
@@ -3978,6 +4104,9 @@ static int nand_dt_init(struct nand_chip *chip)
if (ecc_mode >= 0)
chip->ecc.mode = ecc_mode;
+ if (ecc_algo >= 0)
+ chip->ecc.algo = ecc_algo;
+
if (ecc_strength >= 0)
chip->ecc.strength = ecc_strength;
@@ -4054,6 +4183,82 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips,
}
EXPORT_SYMBOL(nand_scan_ident);
+static int nand_set_ecc_soft_ops(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+
+ if (WARN_ON(ecc->mode != NAND_ECC_SOFT))
+ return -EINVAL;
+
+ switch (ecc->algo) {
+ case NAND_ECC_HAMMING:
+ ecc->calculate = nand_calculate_ecc;
+ ecc->correct = nand_correct_data;
+ ecc->read_page = nand_read_page_swecc;
+ ecc->read_subpage = nand_read_subpage;
+ ecc->write_page = nand_write_page_swecc;
+ ecc->read_page_raw = nand_read_page_raw;
+ ecc->write_page_raw = nand_write_page_raw;
+ ecc->read_oob = nand_read_oob_std;
+ ecc->write_oob = nand_write_oob_std;
+ if (!ecc->size)
+ ecc->size = 256;
+ ecc->bytes = 3;
+ ecc->strength = 1;
+ return 0;
+ case NAND_ECC_BCH:
+ if (!mtd_nand_has_bch()) {
+ WARN(1, "CONFIG_MTD_NAND_ECC_BCH not enabled\n");
+ return -EINVAL;
+ }
+ ecc->calculate = nand_bch_calculate_ecc;
+ ecc->correct = nand_bch_correct_data;
+ ecc->read_page = nand_read_page_swecc;
+ ecc->read_subpage = nand_read_subpage;
+ ecc->write_page = nand_write_page_swecc;
+ ecc->read_page_raw = nand_read_page_raw;
+ ecc->write_page_raw = nand_write_page_raw;
+ ecc->read_oob = nand_read_oob_std;
+ ecc->write_oob = nand_write_oob_std;
+ /*
+ * Board driver should supply ecc.size and ecc.strength
+ * values to select how many bits are correctable.
+ * Otherwise, default to 4 bits for large page devices.
+ */
+ if (!ecc->size && (mtd->oobsize >= 64)) {
+ ecc->size = 512;
+ ecc->strength = 4;
+ }
+
+ /*
+ * if no ecc placement scheme was provided pickup the default
+ * large page one.
+ */
+ if (!mtd->ooblayout) {
+ /* handle large page devices only */
+ if (mtd->oobsize < 64) {
+ WARN(1, "OOB layout is required when using software BCH on small pages\n");
+ return -EINVAL;
+ }
+
+ mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
+ }
+
+ /* See nand_bch_init() for details. */
+ ecc->bytes = 0;
+ ecc->priv = nand_bch_init(mtd);
+ if (!ecc->priv) {
+ WARN(1, "BCH ECC initialization failed!\n");
+ return -EINVAL;
+ }
+ return 0;
+ default:
+ WARN(1, "Unsupported ECC algorithm!\n");
+ return -EINVAL;
+ }
+}
+
/*
* Check if the chip configuration meet the datasheet requirements.
@@ -4098,14 +4303,15 @@ static bool nand_ecc_strength_good(struct mtd_info *mtd)
*/
int nand_scan_tail(struct mtd_info *mtd)
{
- int i;
struct nand_chip *chip = mtd_to_nand(mtd);
struct nand_ecc_ctrl *ecc = &chip->ecc;
struct nand_buffers *nbuf;
+ int ret;
/* New bad blocks should be marked in OOB, flash-based BBT, or both */
- BUG_ON((chip->bbt_options & NAND_BBT_NO_OOB_BBM) &&
- !(chip->bbt_options & NAND_BBT_USE_FLASH));
+ if (WARN_ON((chip->bbt_options & NAND_BBT_NO_OOB_BBM) &&
+ !(chip->bbt_options & NAND_BBT_USE_FLASH)))
+ return -EINVAL;
if (!(chip->options & NAND_OWN_BUFFERS)) {
nbuf = kzalloc(sizeof(*nbuf) + mtd->writesize
@@ -4128,24 +4334,22 @@ int nand_scan_tail(struct mtd_info *mtd)
/*
* If no default placement scheme is given, select an appropriate one.
*/
- if (!ecc->layout && (ecc->mode != NAND_ECC_SOFT_BCH)) {
+ if (!mtd->ooblayout &&
+ !(ecc->mode == NAND_ECC_SOFT && ecc->algo == NAND_ECC_BCH)) {
switch (mtd->oobsize) {
case 8:
- ecc->layout = &nand_oob_8;
- break;
case 16:
- ecc->layout = &nand_oob_16;
+ mtd_set_ooblayout(mtd, &nand_ooblayout_sp_ops);
break;
case 64:
- ecc->layout = &nand_oob_64;
- break;
case 128:
- ecc->layout = &nand_oob_128;
+ mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
break;
default:
- pr_warn("No oob scheme defined for oobsize %d\n",
- mtd->oobsize);
- BUG();
+ WARN(1, "No oob scheme defined for oobsize %d\n",
+ mtd->oobsize);
+ ret = -EINVAL;
+ goto err_free;
}
}
@@ -4161,8 +4365,9 @@ int nand_scan_tail(struct mtd_info *mtd)
case NAND_ECC_HW_OOB_FIRST:
/* Similar to NAND_ECC_HW, but a separate read_page handle */
if (!ecc->calculate || !ecc->correct || !ecc->hwctl) {
- pr_warn("No ECC functions supplied; hardware ECC not possible\n");
- BUG();
+ WARN(1, "No ECC functions supplied; hardware ECC not possible\n");
+ ret = -EINVAL;
+ goto err_free;
}
if (!ecc->read_page)
ecc->read_page = nand_read_page_hwecc_oob_first;
@@ -4192,8 +4397,9 @@ int nand_scan_tail(struct mtd_info *mtd)
ecc->read_page == nand_read_page_hwecc ||
!ecc->write_page ||
ecc->write_page == nand_write_page_hwecc)) {
- pr_warn("No ECC functions supplied; hardware ECC not possible\n");
- BUG();
+ WARN(1, "No ECC functions supplied; hardware ECC not possible\n");
+ ret = -EINVAL;
+ goto err_free;
}
/* Use standard syndrome read/write page function? */
if (!ecc->read_page)
@@ -4211,61 +4417,22 @@ int nand_scan_tail(struct mtd_info *mtd)
if (mtd->writesize >= ecc->size) {
if (!ecc->strength) {
- pr_warn("Driver must set ecc.strength when using hardware ECC\n");
- BUG();
+ WARN(1, "Driver must set ecc.strength when using hardware ECC\n");
+ ret = -EINVAL;
+ goto err_free;
}
break;
}
pr_warn("%d byte HW ECC not possible on %d byte page size, fallback to SW ECC\n",
ecc->size, mtd->writesize);
ecc->mode = NAND_ECC_SOFT;
+ ecc->algo = NAND_ECC_HAMMING;
case NAND_ECC_SOFT:
- ecc->calculate = nand_calculate_ecc;
- ecc->correct = nand_correct_data;
- ecc->read_page = nand_read_page_swecc;
- ecc->read_subpage = nand_read_subpage;
- ecc->write_page = nand_write_page_swecc;
- ecc->read_page_raw = nand_read_page_raw;
- ecc->write_page_raw = nand_write_page_raw;
- ecc->read_oob = nand_read_oob_std;
- ecc->write_oob = nand_write_oob_std;
- if (!ecc->size)
- ecc->size = 256;
- ecc->bytes = 3;
- ecc->strength = 1;
- break;
-
- case NAND_ECC_SOFT_BCH:
- if (!mtd_nand_has_bch()) {
- pr_warn("CONFIG_MTD_NAND_ECC_BCH not enabled\n");
- BUG();
- }
- ecc->calculate = nand_bch_calculate_ecc;
- ecc->correct = nand_bch_correct_data;
- ecc->read_page = nand_read_page_swecc;
- ecc->read_subpage = nand_read_subpage;
- ecc->write_page = nand_write_page_swecc;
- ecc->read_page_raw = nand_read_page_raw;
- ecc->write_page_raw = nand_write_page_raw;
- ecc->read_oob = nand_read_oob_std;
- ecc->write_oob = nand_write_oob_std;
- /*
- * Board driver should supply ecc.size and ecc.strength values
- * to select how many bits are correctable. Otherwise, default
- * to 4 bits for large page devices.
- */
- if (!ecc->size && (mtd->oobsize >= 64)) {
- ecc->size = 512;
- ecc->strength = 4;
- }
-
- /* See nand_bch_init() for details. */
- ecc->bytes = 0;
- ecc->priv = nand_bch_init(mtd);
- if (!ecc->priv) {
- pr_warn("BCH ECC initialization failed!\n");
- BUG();
+ ret = nand_set_ecc_soft_ops(mtd);
+ if (ret) {
+ ret = -EINVAL;
+ goto err_free;
}
break;
@@ -4283,8 +4450,9 @@ int nand_scan_tail(struct mtd_info *mtd)
break;
default:
- pr_warn("Invalid NAND_ECC_MODE %d\n", ecc->mode);
- BUG();
+ WARN(1, "Invalid NAND_ECC_MODE %d\n", ecc->mode);
+ ret = -EINVAL;
+ goto err_free;
}
/* For many systems, the standard OOB write also works for raw */
@@ -4293,20 +4461,9 @@ int nand_scan_tail(struct mtd_info *mtd)
if (!ecc->write_oob_raw)
ecc->write_oob_raw = ecc->write_oob;
- /*
- * The number of bytes available for a client to place data into
- * the out of band area.
- */
- mtd->oobavail = 0;
- if (ecc->layout) {
- for (i = 0; ecc->layout->oobfree[i].length; i++)
- mtd->oobavail += ecc->layout->oobfree[i].length;
- }
-
- /* ECC sanity check: warn if it's too weak */
- if (!nand_ecc_strength_good(mtd))
- pr_warn("WARNING: %s: the ECC used on your system is too weak compared to the one required by the NAND chip\n",
- mtd->name);
+ /* propagate ecc info to mtd_info */
+ mtd->ecc_strength = ecc->strength;
+ mtd->ecc_step_size = ecc->size;
/*
* Set the number of read / write steps for one page depending on ECC
@@ -4314,11 +4471,27 @@ int nand_scan_tail(struct mtd_info *mtd)
*/
ecc->steps = mtd->writesize / ecc->size;
if (ecc->steps * ecc->size != mtd->writesize) {
- pr_warn("Invalid ECC parameters\n");
- BUG();
+ WARN(1, "Invalid ECC parameters\n");
+ ret = -EINVAL;
+ goto err_free;
}
ecc->total = ecc->steps * ecc->bytes;
+ /*
+ * The number of bytes available for a client to place data into
+ * the out of band area.
+ */
+ ret = mtd_ooblayout_count_freebytes(mtd);
+ if (ret < 0)
+ ret = 0;
+
+ mtd->oobavail = ret;
+
+ /* ECC sanity check: warn if it's too weak */
+ if (!nand_ecc_strength_good(mtd))
+ pr_warn("WARNING: %s: the ECC used on your system is too weak compared to the one required by the NAND chip\n",
+ mtd->name);
+
/* Allow subpage writes up to ecc.steps. Not possible for MLC flash */
if (!(chip->options & NAND_NO_SUBPAGE_WRITE) && nand_is_slc(chip)) {
switch (ecc->steps) {
@@ -4343,7 +4516,6 @@ int nand_scan_tail(struct mtd_info *mtd)
/* Large page NAND with SOFT_ECC should support subpage reads */
switch (ecc->mode) {
case NAND_ECC_SOFT:
- case NAND_ECC_SOFT_BCH:
if (chip->page_shift > 9)
chip->options |= NAND_SUBPAGE_READ;
break;
@@ -4375,10 +4547,6 @@ int nand_scan_tail(struct mtd_info *mtd)
mtd->_block_markbad = nand_block_markbad;
mtd->writebufsize = mtd->writesize;
- /* propagate ecc info to mtd_info */
- mtd->ecclayout = ecc->layout;
- mtd->ecc_strength = ecc->strength;
- mtd->ecc_step_size = ecc->size;
/*
* Initialize bitflip_threshold to its default prior scan_bbt() call.
* scan_bbt() might invoke mtd_read(), thus bitflip_threshold must be
@@ -4393,6 +4561,10 @@ int nand_scan_tail(struct mtd_info *mtd)
/* Build bad block table */
return chip->scan_bbt(mtd);
+err_free:
+ if (!(chip->options & NAND_OWN_BUFFERS))
+ kfree(chip->buffers);
+ return ret;
}
EXPORT_SYMBOL(nand_scan_tail);
@@ -4436,7 +4608,8 @@ void nand_release(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd_to_nand(mtd);
- if (chip->ecc.mode == NAND_ECC_SOFT_BCH)
+ if (chip->ecc.mode == NAND_ECC_SOFT &&
+ chip->ecc.algo == NAND_ECC_BCH)
nand_bch_free((struct nand_bch_control *)chip->ecc.priv);
mtd_device_unregister(mtd);
diff --git a/drivers/mtd/nand/nand_bch.c b/drivers/mtd/nand/nand_bch.c
index b585bae37929..44763f87eae4 100644
--- a/drivers/mtd/nand/nand_bch.c
+++ b/drivers/mtd/nand/nand_bch.c
@@ -32,13 +32,11 @@
/**
* struct nand_bch_control - private NAND BCH control structure
* @bch: BCH control structure
- * @ecclayout: private ecc layout for this BCH configuration
* @errloc: error location array
* @eccmask: XOR ecc mask, allows erased pages to be decoded as valid
*/
struct nand_bch_control {
struct bch_control *bch;
- struct nand_ecclayout ecclayout;
unsigned int *errloc;
unsigned char *eccmask;
};
@@ -124,7 +122,6 @@ struct nand_bch_control *nand_bch_init(struct mtd_info *mtd)
{
struct nand_chip *nand = mtd_to_nand(mtd);
unsigned int m, t, eccsteps, i;
- struct nand_ecclayout *layout = nand->ecc.layout;
struct nand_bch_control *nbc = NULL;
unsigned char *erased_page;
unsigned int eccsize = nand->ecc.size;
@@ -161,34 +158,10 @@ struct nand_bch_control *nand_bch_init(struct mtd_info *mtd)
eccsteps = mtd->writesize/eccsize;
- /* if no ecc placement scheme was provided, build one */
- if (!layout) {
-
- /* handle large page devices only */
- if (mtd->oobsize < 64) {
- printk(KERN_WARNING "must provide an oob scheme for "
- "oobsize %d\n", mtd->oobsize);
- goto fail;
- }
-
- layout = &nbc->ecclayout;
- layout->eccbytes = eccsteps*eccbytes;
-
- /* reserve 2 bytes for bad block marker */
- if (layout->eccbytes+2 > mtd->oobsize) {
- printk(KERN_WARNING "no suitable oob scheme available "
- "for oobsize %d eccbytes %u\n", mtd->oobsize,
- eccbytes);
- goto fail;
- }
- /* put ecc bytes at oob tail */
- for (i = 0; i < layout->eccbytes; i++)
- layout->eccpos[i] = mtd->oobsize-layout->eccbytes+i;
-
- layout->oobfree[0].offset = 2;
- layout->oobfree[0].length = mtd->oobsize-2-layout->eccbytes;
-
- nand->ecc.layout = layout;
+ /* Check that we have an oob layout description. */
+ if (!mtd->ooblayout) {
+ pr_warn("missing oob scheme");
+ goto fail;
}
/* sanity checks */
@@ -196,7 +169,18 @@ struct nand_bch_control *nand_bch_init(struct mtd_info *mtd)
printk(KERN_WARNING "eccsize %u is too large\n", eccsize);
goto fail;
}
- if (layout->eccbytes != (eccsteps*eccbytes)) {
+
+ /*
+ * ecc->steps and ecc->total might be used by mtd->ooblayout->ecc(),
+ * which is called by mtd_ooblayout_count_eccbytes().
+ * Make sure they are properly initialized before calling
+ * mtd_ooblayout_count_eccbytes().
+ * FIXME: we should probably rework the sequencing in nand_scan_tail()
+ * to avoid setting those fields twice.
+ */
+ nand->ecc.steps = eccsteps;
+ nand->ecc.total = eccsteps * eccbytes;
+ if (mtd_ooblayout_count_eccbytes(mtd) != (eccsteps*eccbytes)) {
printk(KERN_WARNING "invalid ecc layout\n");
goto fail;
}
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index a58169a28741..1eb934414eb5 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -569,7 +569,7 @@ static void nandsim_debugfs_remove(struct nandsim *ns)
*
* RETURNS: 0 if success, -ENOMEM if memory alloc fails.
*/
-static int alloc_device(struct nandsim *ns)
+static int __init alloc_device(struct nandsim *ns)
{
struct file *cfile;
int i, err;
@@ -654,7 +654,7 @@ static void free_device(struct nandsim *ns)
}
}
-static char *get_partition_name(int i)
+static char __init *get_partition_name(int i)
{
return kasprintf(GFP_KERNEL, "NAND simulator partition %d", i);
}
@@ -664,7 +664,7 @@ static char *get_partition_name(int i)
*
* RETURNS: 0 if success, -ERRNO if failure.
*/
-static int init_nandsim(struct mtd_info *mtd)
+static int __init init_nandsim(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd_to_nand(mtd);
struct nandsim *ns = nand_get_controller_data(chip);
@@ -2261,6 +2261,7 @@ static int __init ns_init_module(void)
chip->read_buf = ns_nand_read_buf;
chip->read_word = ns_nand_read_word;
chip->ecc.mode = NAND_ECC_SOFT;
+ chip->ecc.algo = NAND_ECC_HAMMING;
/* The NAND_SKIP_BBTSCAN option is necessary for 'overridesize' */
/* and 'badblocks' parameters to work */
chip->options |= NAND_SKIP_BBTSCAN;
@@ -2338,7 +2339,8 @@ static int __init ns_init_module(void)
retval = -EINVAL;
goto error;
}
- chip->ecc.mode = NAND_ECC_SOFT_BCH;
+ chip->ecc.mode = NAND_ECC_SOFT;
+ chip->ecc.algo = NAND_ECC_BCH;
chip->ecc.size = 512;
chip->ecc.strength = bch;
chip->ecc.bytes = eccbytes;
diff --git a/drivers/mtd/nand/nuc900_nand.c b/drivers/mtd/nand/nuc900_nand.c
index dbc5b571c2bb..8f64011d32ef 100644
--- a/drivers/mtd/nand/nuc900_nand.c
+++ b/drivers/mtd/nand/nuc900_nand.c
@@ -261,6 +261,7 @@ static int nuc900_nand_probe(struct platform_device *pdev)
chip->chip_delay = 50;
chip->options = 0;
chip->ecc.mode = NAND_ECC_SOFT;
+ chip->ecc.algo = NAND_ECC_HAMMING;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
nuc900_nand->reg = devm_ioremap_resource(&pdev->dev, res);
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index 0749ca1a1456..08e158895635 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -12,6 +12,7 @@
#include <linux/dmaengine.h>
#include <linux/dma-mapping.h>
#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/jiffies.h>
@@ -28,6 +29,7 @@
#include <linux/mtd/nand_bch.h>
#include <linux/platform_data/elm.h>
+#include <linux/omap-gpmc.h>
#include <linux/platform_data/mtd-nand-omap2.h>
#define DRIVER_NAME "omap2-nand"
@@ -151,13 +153,17 @@ static struct nand_hw_control omap_gpmc_controller = {
};
struct omap_nand_info {
- struct omap_nand_platform_data *pdata;
struct nand_chip nand;
struct platform_device *pdev;
int gpmc_cs;
- unsigned long phys_base;
+ bool dev_ready;
+ enum nand_io xfer_type;
+ int devsize;
enum omap_ecc ecc_opt;
+ struct device_node *elm_of_node;
+
+ unsigned long phys_base;
struct completion comp;
struct dma_chan *dma;
int gpmc_irq_fifo;
@@ -168,12 +174,14 @@ struct omap_nand_info {
} iomode;
u_char *buf;
int buf_len;
+ /* Interface to GPMC */
struct gpmc_nand_regs reg;
- /* generated at runtime depending on ECC algorithm and layout selected */
- struct nand_ecclayout oobinfo;
+ struct gpmc_nand_ops *ops;
+ bool flash_bbt;
/* fields specific for BCHx_HW ECC scheme */
struct device *elm_dev;
- struct device_node *of_node;
+ /* NAND ready gpio */
+ struct gpio_desc *ready_gpiod;
};
static inline struct omap_nand_info *mtd_to_omap(struct mtd_info *mtd)
@@ -208,7 +216,7 @@ static int omap_prefetch_enable(int cs, int fifo_th, int dma_mode,
*/
val = ((cs << PREFETCH_CONFIG1_CS_SHIFT) |
PREFETCH_FIFOTHRESHOLD(fifo_th) | ENABLE_PREFETCH |
- (dma_mode << DMA_MPU_MODE_SHIFT) | (0x1 & is_write));
+ (dma_mode << DMA_MPU_MODE_SHIFT) | (is_write & 0x1));
writel(val, info->reg.gpmc_prefetch_config1);
/* Start the prefetch engine */
@@ -288,14 +296,13 @@ static void omap_write_buf8(struct mtd_info *mtd, const u_char *buf, int len)
{
struct omap_nand_info *info = mtd_to_omap(mtd);
u_char *p = (u_char *)buf;
- u32 status = 0;
+ bool status;
while (len--) {
iowrite8(*p++, info->nand.IO_ADDR_W);
/* wait until buffer is available for write */
do {
- status = readl(info->reg.gpmc_status) &
- STATUS_BUFF_EMPTY;
+ status = info->ops->nand_writebuffer_empty();
} while (!status);
}
}
@@ -323,7 +330,7 @@ static void omap_write_buf16(struct mtd_info *mtd, const u_char * buf, int len)
{
struct omap_nand_info *info = mtd_to_omap(mtd);
u16 *p = (u16 *) buf;
- u32 status = 0;
+ bool status;
/* FIXME try bursts of writesw() or DMA ... */
len >>= 1;
@@ -331,8 +338,7 @@ static void omap_write_buf16(struct mtd_info *mtd, const u_char * buf, int len)
iowrite16(*p++, info->nand.IO_ADDR_W);
/* wait until buffer is available for write */
do {
- status = readl(info->reg.gpmc_status) &
- STATUS_BUFF_EMPTY;
+ status = info->ops->nand_writebuffer_empty();
} while (!status);
}
}
@@ -467,17 +473,8 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
int ret;
u32 val;
- if (addr >= high_memory) {
- struct page *p1;
-
- if (((size_t)addr & PAGE_MASK) !=
- ((size_t)(addr + len - 1) & PAGE_MASK))
- goto out_copy;
- p1 = vmalloc_to_page(addr);
- if (!p1)
- goto out_copy;
- addr = page_address(p1) + ((size_t)addr & ~PAGE_MASK);
- }
+ if (!virt_addr_valid(addr))
+ goto out_copy;
sg_init_one(&sg, addr, len);
n = dma_map_sg(info->dma->device->dev, &sg, 1, dir);
@@ -497,6 +494,11 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
tx->callback_param = &info->comp;
dmaengine_submit(tx);
+ init_completion(&info->comp);
+
+ /* setup and start DMA using dma_addr */
+ dma_async_issue_pending(info->dma);
+
/* configure and start prefetch transfer */
ret = omap_prefetch_enable(info->gpmc_cs,
PREFETCH_FIFOTHRESHOLD_MAX, 0x1, len, is_write, info);
@@ -504,10 +506,6 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
/* PFPW engine is busy, use cpu copy method */
goto out_copy_unmap;
- init_completion(&info->comp);
- dma_async_issue_pending(info->dma);
-
- /* setup and start DMA using dma_addr */
wait_for_completion(&info->comp);
tim = 0;
limit = (loops_per_jiffy * msecs_to_jiffies(OMAP_NAND_TIMEOUT_MS));
@@ -1017,21 +1015,16 @@ static int omap_wait(struct mtd_info *mtd, struct nand_chip *chip)
}
/**
- * omap_dev_ready - calls the platform specific dev_ready function
+ * omap_dev_ready - checks the NAND Ready GPIO line
* @mtd: MTD device structure
+ *
+ * Returns true if ready and false if busy.
*/
static int omap_dev_ready(struct mtd_info *mtd)
{
- unsigned int val = 0;
struct omap_nand_info *info = mtd_to_omap(mtd);
- val = readl(info->reg.gpmc_status);
-
- if ((val & 0x100) == 0x100) {
- return 1;
- } else {
- return 0;
- }
+ return gpiod_get_value(info->ready_gpiod);
}
/**
@@ -1495,9 +1488,8 @@ static int omap_elm_correct_data(struct mtd_info *mtd, u_char *data,
static int omap_write_page_bch(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf, int oob_required, int page)
{
- int i;
+ int ret;
uint8_t *ecc_calc = chip->buffers->ecccalc;
- uint32_t *eccpos = chip->ecc.layout->eccpos;
/* Enable GPMC ecc engine */
chip->ecc.hwctl(mtd, NAND_ECC_WRITE);
@@ -1508,8 +1500,10 @@ static int omap_write_page_bch(struct mtd_info *mtd, struct nand_chip *chip,
/* Update ecc vector from GPMC result registers */
chip->ecc.calculate(mtd, buf, &ecc_calc[0]);
- for (i = 0; i < chip->ecc.total; i++)
- chip->oob_poi[eccpos[i]] = ecc_calc[i];
+ ret = mtd_ooblayout_set_eccbytes(mtd, ecc_calc, chip->oob_poi, 0,
+ chip->ecc.total);
+ if (ret)
+ return ret;
/* Write ecc vector to OOB area */
chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
@@ -1536,10 +1530,7 @@ static int omap_read_page_bch(struct mtd_info *mtd, struct nand_chip *chip,
{
uint8_t *ecc_calc = chip->buffers->ecccalc;
uint8_t *ecc_code = chip->buffers->ecccode;
- uint32_t *eccpos = chip->ecc.layout->eccpos;
- uint8_t *oob = &chip->oob_poi[eccpos[0]];
- uint32_t oob_pos = mtd->writesize + chip->ecc.layout->eccpos[0];
- int stat;
+ int stat, ret;
unsigned int max_bitflips = 0;
/* Enable GPMC ecc engine */
@@ -1549,13 +1540,18 @@ static int omap_read_page_bch(struct mtd_info *mtd, struct nand_chip *chip,
chip->read_buf(mtd, buf, mtd->writesize);
/* Read oob bytes */
- chip->cmdfunc(mtd, NAND_CMD_RNDOUT, oob_pos, -1);
- chip->read_buf(mtd, oob, chip->ecc.total);
+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT,
+ mtd->writesize + BADBLOCK_MARKER_LENGTH, -1);
+ chip->read_buf(mtd, chip->oob_poi + BADBLOCK_MARKER_LENGTH,
+ chip->ecc.total);
/* Calculate ecc bytes */
chip->ecc.calculate(mtd, buf, ecc_calc);
- memcpy(ecc_code, &chip->oob_poi[eccpos[0]], chip->ecc.total);
+ ret = mtd_ooblayout_get_eccbytes(mtd, ecc_code, chip->oob_poi, 0,
+ chip->ecc.total);
+ if (ret)
+ return ret;
stat = chip->ecc.correct(mtd, buf, ecc_code, ecc_calc);
@@ -1630,7 +1626,7 @@ static bool omap2_nand_ecc_check(struct omap_nand_info *info,
"CONFIG_MTD_NAND_OMAP_BCH not enabled\n");
return false;
}
- if (ecc_needs_elm && !is_elm_present(info, pdata->elm_of_node)) {
+ if (ecc_needs_elm && !is_elm_present(info, info->elm_of_node)) {
dev_err(&info->pdev->dev, "ELM not available\n");
return false;
}
@@ -1638,43 +1634,227 @@ static bool omap2_nand_ecc_check(struct omap_nand_info *info,
return true;
}
+static const char * const nand_xfer_types[] = {
+ [NAND_OMAP_PREFETCH_POLLED] = "prefetch-polled",
+ [NAND_OMAP_POLLED] = "polled",
+ [NAND_OMAP_PREFETCH_DMA] = "prefetch-dma",
+ [NAND_OMAP_PREFETCH_IRQ] = "prefetch-irq",
+};
+
+static int omap_get_dt_info(struct device *dev, struct omap_nand_info *info)
+{
+ struct device_node *child = dev->of_node;
+ int i;
+ const char *s;
+ u32 cs;
+
+ if (of_property_read_u32(child, "reg", &cs) < 0) {
+ dev_err(dev, "reg not found in DT\n");
+ return -EINVAL;
+ }
+
+ info->gpmc_cs = cs;
+
+ /* detect availability of ELM module. Won't be present pre-OMAP4 */
+ info->elm_of_node = of_parse_phandle(child, "ti,elm-id", 0);
+ if (!info->elm_of_node)
+ dev_dbg(dev, "ti,elm-id not in DT\n");
+
+ /* select ecc-scheme for NAND */
+ if (of_property_read_string(child, "ti,nand-ecc-opt", &s)) {
+ dev_err(dev, "ti,nand-ecc-opt not found\n");
+ return -EINVAL;
+ }
+
+ if (!strcmp(s, "sw")) {
+ info->ecc_opt = OMAP_ECC_HAM1_CODE_SW;
+ } else if (!strcmp(s, "ham1") ||
+ !strcmp(s, "hw") || !strcmp(s, "hw-romcode")) {
+ info->ecc_opt = OMAP_ECC_HAM1_CODE_HW;
+ } else if (!strcmp(s, "bch4")) {
+ if (info->elm_of_node)
+ info->ecc_opt = OMAP_ECC_BCH4_CODE_HW;
+ else
+ info->ecc_opt = OMAP_ECC_BCH4_CODE_HW_DETECTION_SW;
+ } else if (!strcmp(s, "bch8")) {
+ if (info->elm_of_node)
+ info->ecc_opt = OMAP_ECC_BCH8_CODE_HW;
+ else
+ info->ecc_opt = OMAP_ECC_BCH8_CODE_HW_DETECTION_SW;
+ } else if (!strcmp(s, "bch16")) {
+ info->ecc_opt = OMAP_ECC_BCH16_CODE_HW;
+ } else {
+ dev_err(dev, "unrecognized value for ti,nand-ecc-opt\n");
+ return -EINVAL;
+ }
+
+ /* select data transfer mode */
+ if (!of_property_read_string(child, "ti,nand-xfer-type", &s)) {
+ for (i = 0; i < ARRAY_SIZE(nand_xfer_types); i++) {
+ if (!strcasecmp(s, nand_xfer_types[i])) {
+ info->xfer_type = i;
+ return 0;
+ }
+ }
+
+ dev_err(dev, "unrecognized value for ti,nand-xfer-type\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int omap_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct omap_nand_info *info = mtd_to_omap(mtd);
+ struct nand_chip *chip = &info->nand;
+ int off = BADBLOCK_MARKER_LENGTH;
+
+ if (info->ecc_opt == OMAP_ECC_HAM1_CODE_HW &&
+ !(chip->options & NAND_BUSWIDTH_16))
+ off = 1;
+
+ if (section)
+ return -ERANGE;
+
+ oobregion->offset = off;
+ oobregion->length = chip->ecc.total;
+
+ return 0;
+}
+
+static int omap_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct omap_nand_info *info = mtd_to_omap(mtd);
+ struct nand_chip *chip = &info->nand;
+ int off = BADBLOCK_MARKER_LENGTH;
+
+ if (info->ecc_opt == OMAP_ECC_HAM1_CODE_HW &&
+ !(chip->options & NAND_BUSWIDTH_16))
+ off = 1;
+
+ if (section)
+ return -ERANGE;
+
+ off += chip->ecc.total;
+ if (off >= mtd->oobsize)
+ return -ERANGE;
+
+ oobregion->offset = off;
+ oobregion->length = mtd->oobsize - off;
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops omap_ooblayout_ops = {
+ .ecc = omap_ooblayout_ecc,
+ .free = omap_ooblayout_free,
+};
+
+static int omap_sw_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ int off = BADBLOCK_MARKER_LENGTH;
+
+ if (section >= chip->ecc.steps)
+ return -ERANGE;
+
+ /*
+ * When SW correction is employed, one OMAP specific marker byte is
+ * reserved after each ECC step.
+ */
+ oobregion->offset = off + (section * (chip->ecc.bytes + 1));
+ oobregion->length = chip->ecc.bytes;
+
+ return 0;
+}
+
+static int omap_sw_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ int off = BADBLOCK_MARKER_LENGTH;
+
+ if (section)
+ return -ERANGE;
+
+ /*
+ * When SW correction is employed, one OMAP specific marker byte is
+ * reserved after each ECC step.
+ */
+ off += ((chip->ecc.bytes + 1) * chip->ecc.steps);
+ if (off >= mtd->oobsize)
+ return -ERANGE;
+
+ oobregion->offset = off;
+ oobregion->length = mtd->oobsize - off;
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops omap_sw_ooblayout_ops = {
+ .ecc = omap_sw_ooblayout_ecc,
+ .free = omap_sw_ooblayout_free,
+};
+
static int omap_nand_probe(struct platform_device *pdev)
{
struct omap_nand_info *info;
- struct omap_nand_platform_data *pdata;
+ struct omap_nand_platform_data *pdata = NULL;
struct mtd_info *mtd;
struct nand_chip *nand_chip;
- struct nand_ecclayout *ecclayout;
int err;
- int i;
dma_cap_mask_t mask;
unsigned sig;
- unsigned oob_index;
struct resource *res;
-
- pdata = dev_get_platdata(&pdev->dev);
- if (pdata == NULL) {
- dev_err(&pdev->dev, "platform data missing\n");
- return -ENODEV;
- }
+ struct device *dev = &pdev->dev;
+ int min_oobbytes = BADBLOCK_MARKER_LENGTH;
+ int oobbytes_per_step;
info = devm_kzalloc(&pdev->dev, sizeof(struct omap_nand_info),
GFP_KERNEL);
if (!info)
return -ENOMEM;
+ info->pdev = pdev;
+
+ if (dev->of_node) {
+ if (omap_get_dt_info(dev, info))
+ return -EINVAL;
+ } else {
+ pdata = dev_get_platdata(&pdev->dev);
+ if (!pdata) {
+ dev_err(&pdev->dev, "platform data missing\n");
+ return -EINVAL;
+ }
+
+ info->gpmc_cs = pdata->cs;
+ info->reg = pdata->reg;
+ info->ecc_opt = pdata->ecc_opt;
+ if (pdata->dev_ready)
+ dev_info(&pdev->dev, "pdata->dev_ready is deprecated\n");
+
+ info->xfer_type = pdata->xfer_type;
+ info->devsize = pdata->devsize;
+ info->elm_of_node = pdata->elm_of_node;
+ info->flash_bbt = pdata->flash_bbt;
+ }
+
platform_set_drvdata(pdev, info);
+ info->ops = gpmc_omap_get_nand_ops(&info->reg, info->gpmc_cs);
+ if (!info->ops) {
+ dev_err(&pdev->dev, "Failed to get GPMC->NAND interface\n");
+ return -ENODEV;
+ }
- info->pdev = pdev;
- info->gpmc_cs = pdata->cs;
- info->reg = pdata->reg;
- info->of_node = pdata->of_node;
- info->ecc_opt = pdata->ecc_opt;
nand_chip = &info->nand;
mtd = nand_to_mtd(nand_chip);
mtd->dev.parent = &pdev->dev;
nand_chip->ecc.priv = NULL;
- nand_set_flash_node(nand_chip, pdata->of_node);
+ nand_set_flash_node(nand_chip, dev->of_node);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
nand_chip->IO_ADDR_R = devm_ioremap_resource(&pdev->dev, res);
@@ -1688,6 +1868,13 @@ static int omap_nand_probe(struct platform_device *pdev)
nand_chip->IO_ADDR_W = nand_chip->IO_ADDR_R;
nand_chip->cmd_ctrl = omap_hwcontrol;
+ info->ready_gpiod = devm_gpiod_get_optional(&pdev->dev, "rb",
+ GPIOD_IN);
+ if (IS_ERR(info->ready_gpiod)) {
+ dev_err(dev, "failed to get ready gpio\n");
+ return PTR_ERR(info->ready_gpiod);
+ }
+
/*
* If RDY/BSY line is connected to OMAP then use the omap ready
* function and the generic nand_wait function which reads the status
@@ -1695,7 +1882,7 @@ static int omap_nand_probe(struct platform_device *pdev)
* chip delay which is slightly more than tR (AC Timing) of the NAND
* device and read status register until you get a failure or success
*/
- if (pdata->dev_ready) {
+ if (info->ready_gpiod) {
nand_chip->dev_ready = omap_dev_ready;
nand_chip->chip_delay = 0;
} else {
@@ -1703,21 +1890,25 @@ static int omap_nand_probe(struct platform_device *pdev)
nand_chip->chip_delay = 50;
}
- if (pdata->flash_bbt)
- nand_chip->bbt_options |= NAND_BBT_USE_FLASH | NAND_BBT_NO_OOB;
- else
- nand_chip->options |= NAND_SKIP_BBTSCAN;
+ if (info->flash_bbt)
+ nand_chip->bbt_options |= NAND_BBT_USE_FLASH;
/* scan NAND device connected to chip controller */
- nand_chip->options |= pdata->devsize & NAND_BUSWIDTH_16;
+ nand_chip->options |= info->devsize & NAND_BUSWIDTH_16;
if (nand_scan_ident(mtd, 1, NULL)) {
- dev_err(&info->pdev->dev, "scan failed, may be bus-width mismatch\n");
+ dev_err(&info->pdev->dev,
+ "scan failed, may be bus-width mismatch\n");
err = -ENXIO;
goto return_error;
}
+ if (nand_chip->bbt_options & NAND_BBT_USE_FLASH)
+ nand_chip->bbt_options |= NAND_BBT_NO_OOB;
+ else
+ nand_chip->options |= NAND_SKIP_BBTSCAN;
+
/* re-populate low-level callbacks based on xfer modes */
- switch (pdata->xfer_type) {
+ switch (info->xfer_type) {
case NAND_OMAP_PREFETCH_POLLED:
nand_chip->read_buf = omap_read_buf_pref;
nand_chip->write_buf = omap_write_buf_pref;
@@ -1797,7 +1988,7 @@ static int omap_nand_probe(struct platform_device *pdev)
default:
dev_err(&pdev->dev,
- "xfer_type(%d) not supported!\n", pdata->xfer_type);
+ "xfer_type(%d) not supported!\n", info->xfer_type);
err = -EINVAL;
goto return_error;
}
@@ -1809,16 +2000,15 @@ static int omap_nand_probe(struct platform_device *pdev)
/*
* Bail out earlier to let NAND_ECC_SOFT code create its own
- * ecclayout instead of using ours.
+ * ooblayout instead of using ours.
*/
if (info->ecc_opt == OMAP_ECC_HAM1_CODE_SW) {
nand_chip->ecc.mode = NAND_ECC_SOFT;
+ nand_chip->ecc.algo = NAND_ECC_HAMMING;
goto scan_tail;
}
/* populate MTD interface based on ECC scheme */
- ecclayout = &info->oobinfo;
- nand_chip->ecc.layout = ecclayout;
switch (info->ecc_opt) {
case OMAP_ECC_HAM1_CODE_HW:
pr_info("nand: using OMAP_ECC_HAM1_CODE_HW\n");
@@ -1829,19 +2019,12 @@ static int omap_nand_probe(struct platform_device *pdev)
nand_chip->ecc.calculate = omap_calculate_ecc;
nand_chip->ecc.hwctl = omap_enable_hwecc;
nand_chip->ecc.correct = omap_correct_data;
- /* define ECC layout */
- ecclayout->eccbytes = nand_chip->ecc.bytes *
- (mtd->writesize /
- nand_chip->ecc.size);
- if (nand_chip->options & NAND_BUSWIDTH_16)
- oob_index = BADBLOCK_MARKER_LENGTH;
- else
- oob_index = 1;
- for (i = 0; i < ecclayout->eccbytes; i++, oob_index++)
- ecclayout->eccpos[i] = oob_index;
- /* no reserved-marker in ecclayout for this ecc-scheme */
- ecclayout->oobfree->offset =
- ecclayout->eccpos[ecclayout->eccbytes - 1] + 1;
+ mtd_set_ooblayout(mtd, &omap_ooblayout_ops);
+ oobbytes_per_step = nand_chip->ecc.bytes;
+
+ if (!(nand_chip->options & NAND_BUSWIDTH_16))
+ min_oobbytes = 1;
+
break;
case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW:
@@ -1853,19 +2036,9 @@ static int omap_nand_probe(struct platform_device *pdev)
nand_chip->ecc.hwctl = omap_enable_hwecc_bch;
nand_chip->ecc.correct = nand_bch_correct_data;
nand_chip->ecc.calculate = omap_calculate_ecc_bch;
- /* define ECC layout */
- ecclayout->eccbytes = nand_chip->ecc.bytes *
- (mtd->writesize /
- nand_chip->ecc.size);
- oob_index = BADBLOCK_MARKER_LENGTH;
- for (i = 0; i < ecclayout->eccbytes; i++, oob_index++) {
- ecclayout->eccpos[i] = oob_index;
- if (((i + 1) % nand_chip->ecc.bytes) == 0)
- oob_index++;
- }
- /* include reserved-marker in ecclayout->oobfree calculation */
- ecclayout->oobfree->offset = 1 +
- ecclayout->eccpos[ecclayout->eccbytes - 1] + 1;
+ mtd_set_ooblayout(mtd, &omap_sw_ooblayout_ops);
+ /* Reserve one byte for the OMAP marker */
+ oobbytes_per_step = nand_chip->ecc.bytes + 1;
/* software bch library is used for locating errors */
nand_chip->ecc.priv = nand_bch_init(mtd);
if (!nand_chip->ecc.priv) {
@@ -1887,16 +2060,8 @@ static int omap_nand_probe(struct platform_device *pdev)
nand_chip->ecc.calculate = omap_calculate_ecc_bch;
nand_chip->ecc.read_page = omap_read_page_bch;
nand_chip->ecc.write_page = omap_write_page_bch;
- /* define ECC layout */
- ecclayout->eccbytes = nand_chip->ecc.bytes *
- (mtd->writesize /
- nand_chip->ecc.size);
- oob_index = BADBLOCK_MARKER_LENGTH;
- for (i = 0; i < ecclayout->eccbytes; i++, oob_index++)
- ecclayout->eccpos[i] = oob_index;
- /* reserved marker already included in ecclayout->eccbytes */
- ecclayout->oobfree->offset =
- ecclayout->eccpos[ecclayout->eccbytes - 1] + 1;
+ mtd_set_ooblayout(mtd, &omap_ooblayout_ops);
+ oobbytes_per_step = nand_chip->ecc.bytes;
err = elm_config(info->elm_dev, BCH4_ECC,
mtd->writesize / nand_chip->ecc.size,
@@ -1914,19 +2079,9 @@ static int omap_nand_probe(struct platform_device *pdev)
nand_chip->ecc.hwctl = omap_enable_hwecc_bch;
nand_chip->ecc.correct = nand_bch_correct_data;
nand_chip->ecc.calculate = omap_calculate_ecc_bch;
- /* define ECC layout */
- ecclayout->eccbytes = nand_chip->ecc.bytes *
- (mtd->writesize /
- nand_chip->ecc.size);
- oob_index = BADBLOCK_MARKER_LENGTH;
- for (i = 0; i < ecclayout->eccbytes; i++, oob_index++) {
- ecclayout->eccpos[i] = oob_index;
- if (((i + 1) % nand_chip->ecc.bytes) == 0)
- oob_index++;
- }
- /* include reserved-marker in ecclayout->oobfree calculation */
- ecclayout->oobfree->offset = 1 +
- ecclayout->eccpos[ecclayout->eccbytes - 1] + 1;
+ mtd_set_ooblayout(mtd, &omap_sw_ooblayout_ops);
+ /* Reserve one byte for the OMAP marker */
+ oobbytes_per_step = nand_chip->ecc.bytes + 1;
/* software bch library is used for locating errors */
nand_chip->ecc.priv = nand_bch_init(mtd);
if (!nand_chip->ecc.priv) {
@@ -1948,6 +2103,8 @@ static int omap_nand_probe(struct platform_device *pdev)
nand_chip->ecc.calculate = omap_calculate_ecc_bch;
nand_chip->ecc.read_page = omap_read_page_bch;
nand_chip->ecc.write_page = omap_write_page_bch;
+ mtd_set_ooblayout(mtd, &omap_ooblayout_ops);
+ oobbytes_per_step = nand_chip->ecc.bytes;
err = elm_config(info->elm_dev, BCH8_ECC,
mtd->writesize / nand_chip->ecc.size,
@@ -1955,16 +2112,6 @@ static int omap_nand_probe(struct platform_device *pdev)
if (err < 0)
goto return_error;
- /* define ECC layout */
- ecclayout->eccbytes = nand_chip->ecc.bytes *
- (mtd->writesize /
- nand_chip->ecc.size);
- oob_index = BADBLOCK_MARKER_LENGTH;
- for (i = 0; i < ecclayout->eccbytes; i++, oob_index++)
- ecclayout->eccpos[i] = oob_index;
- /* reserved marker already included in ecclayout->eccbytes */
- ecclayout->oobfree->offset =
- ecclayout->eccpos[ecclayout->eccbytes - 1] + 1;
break;
case OMAP_ECC_BCH16_CODE_HW:
@@ -1978,6 +2125,8 @@ static int omap_nand_probe(struct platform_device *pdev)
nand_chip->ecc.calculate = omap_calculate_ecc_bch;
nand_chip->ecc.read_page = omap_read_page_bch;
nand_chip->ecc.write_page = omap_write_page_bch;
+ mtd_set_ooblayout(mtd, &omap_ooblayout_ops);
+ oobbytes_per_step = nand_chip->ecc.bytes;
err = elm_config(info->elm_dev, BCH16_ECC,
mtd->writesize / nand_chip->ecc.size,
@@ -1985,16 +2134,6 @@ static int omap_nand_probe(struct platform_device *pdev)
if (err < 0)
goto return_error;
- /* define ECC layout */
- ecclayout->eccbytes = nand_chip->ecc.bytes *
- (mtd->writesize /
- nand_chip->ecc.size);
- oob_index = BADBLOCK_MARKER_LENGTH;
- for (i = 0; i < ecclayout->eccbytes; i++, oob_index++)
- ecclayout->eccpos[i] = oob_index;
- /* reserved marker already included in ecclayout->eccbytes */
- ecclayout->oobfree->offset =
- ecclayout->eccpos[ecclayout->eccbytes - 1] + 1;
break;
default:
dev_err(&info->pdev->dev, "invalid or unsupported ECC scheme\n");
@@ -2002,13 +2141,13 @@ static int omap_nand_probe(struct platform_device *pdev)
goto return_error;
}
- /* all OOB bytes from oobfree->offset till end off OOB are free */
- ecclayout->oobfree->length = mtd->oobsize - ecclayout->oobfree->offset;
/* check if NAND device's OOB is enough to store ECC signatures */
- if (mtd->oobsize < (ecclayout->eccbytes + BADBLOCK_MARKER_LENGTH)) {
+ min_oobbytes += (oobbytes_per_step *
+ (mtd->writesize / nand_chip->ecc.size));
+ if (mtd->oobsize < min_oobbytes) {
dev_err(&info->pdev->dev,
"not enough OOB bytes required = %d, available=%d\n",
- ecclayout->eccbytes, mtd->oobsize);
+ min_oobbytes, mtd->oobsize);
err = -EINVAL;
goto return_error;
}
@@ -2020,7 +2159,10 @@ scan_tail:
goto return_error;
}
- mtd_device_register(mtd, pdata->parts, pdata->nr_parts);
+ if (dev->of_node)
+ mtd_device_register(mtd, NULL, 0);
+ else
+ mtd_device_register(mtd, pdata->parts, pdata->nr_parts);
platform_set_drvdata(pdev, mtd);
@@ -2051,11 +2193,17 @@ static int omap_nand_remove(struct platform_device *pdev)
return 0;
}
+static const struct of_device_id omap_nand_ids[] = {
+ { .compatible = "ti,omap2-nand", },
+ {},
+};
+
static struct platform_driver omap_nand_driver = {
.probe = omap_nand_probe,
.remove = omap_nand_remove,
.driver = {
.name = DRIVER_NAME,
+ .of_match_table = of_match_ptr(omap_nand_ids),
},
};
diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c
index d4614bfbfed6..40a7c4a2cf0d 100644
--- a/drivers/mtd/nand/orion_nand.c
+++ b/drivers/mtd/nand/orion_nand.c
@@ -130,6 +130,7 @@ static int __init orion_nand_probe(struct platform_device *pdev)
nc->cmd_ctrl = orion_nand_cmd_ctrl;
nc->read_buf = orion_nand_read_buf;
nc->ecc.mode = NAND_ECC_SOFT;
+ nc->ecc.algo = NAND_ECC_HAMMING;
if (board->chip_delay)
nc->chip_delay = board->chip_delay;
diff --git a/drivers/mtd/nand/pasemi_nand.c b/drivers/mtd/nand/pasemi_nand.c
index 3ab53ca53cca..5de7591b0510 100644
--- a/drivers/mtd/nand/pasemi_nand.c
+++ b/drivers/mtd/nand/pasemi_nand.c
@@ -92,8 +92,9 @@ int pasemi_device_ready(struct mtd_info *mtd)
static int pasemi_nand_probe(struct platform_device *ofdev)
{
+ struct device *dev = &ofdev->dev;
struct pci_dev *pdev;
- struct device_node *np = ofdev->dev.of_node;
+ struct device_node *np = dev->of_node;
struct resource res;
struct nand_chip *chip;
int err = 0;
@@ -107,13 +108,11 @@ static int pasemi_nand_probe(struct platform_device *ofdev)
if (pasemi_nand_mtd)
return -ENODEV;
- pr_debug("pasemi_nand at %pR\n", &res);
+ dev_dbg(dev, "pasemi_nand at %pR\n", &res);
/* Allocate memory for MTD device structure and private data */
chip = kzalloc(sizeof(struct nand_chip), GFP_KERNEL);
if (!chip) {
- printk(KERN_WARNING
- "Unable to allocate PASEMI NAND MTD device structure\n");
err = -ENOMEM;
goto out;
}
@@ -121,7 +120,7 @@ static int pasemi_nand_probe(struct platform_device *ofdev)
pasemi_nand_mtd = nand_to_mtd(chip);
/* Link the private data with the MTD structure */
- pasemi_nand_mtd->dev.parent = &ofdev->dev;
+ pasemi_nand_mtd->dev.parent = dev;
chip->IO_ADDR_R = of_iomap(np, 0);
chip->IO_ADDR_W = chip->IO_ADDR_R;
@@ -151,6 +150,7 @@ static int pasemi_nand_probe(struct platform_device *ofdev)
chip->write_buf = pasemi_write_buf;
chip->chip_delay = 0;
chip->ecc.mode = NAND_ECC_SOFT;
+ chip->ecc.algo = NAND_ECC_HAMMING;
/* Enable the following for a flash based bad block table */
chip->bbt_options = NAND_BBT_USE_FLASH;
@@ -162,13 +162,13 @@ static int pasemi_nand_probe(struct platform_device *ofdev)
}
if (mtd_device_register(pasemi_nand_mtd, NULL, 0)) {
- printk(KERN_ERR "pasemi_nand: Unable to register MTD device\n");
+ dev_err(dev, "Unable to register MTD device\n");
err = -ENODEV;
goto out_lpc;
}
- printk(KERN_INFO "PA Semi NAND flash at %08llx, control at I/O %x\n",
- res.start, lpcctl);
+ dev_info(dev, "PA Semi NAND flash at %pR, control at I/O %x\n", &res,
+ lpcctl);
return 0;
diff --git a/drivers/mtd/nand/plat_nand.c b/drivers/mtd/nand/plat_nand.c
index e4e50da30444..415a53a0deeb 100644
--- a/drivers/mtd/nand/plat_nand.c
+++ b/drivers/mtd/nand/plat_nand.c
@@ -74,6 +74,7 @@ static int plat_nand_probe(struct platform_device *pdev)
data->chip.ecc.hwctl = pdata->ctrl.hwcontrol;
data->chip.ecc.mode = NAND_ECC_SOFT;
+ data->chip.ecc.algo = NAND_ECC_HAMMING;
platform_set_drvdata(pdev, data);
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index d6508856da99..436dd6dc11f4 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -29,7 +29,6 @@
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/of_device.h>
-#include <linux/of_mtd.h>
#include <linux/platform_data/mtd-nand-pxa3xx.h>
#define CHIP_DELAY_TIMEOUT msecs_to_jiffies(200)
@@ -324,6 +323,62 @@ static struct pxa3xx_nand_flash builtin_flash_types[] = {
{ 0xba20, 16, 16, &timing[3] },
};
+static int pxa3xx_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct pxa3xx_nand_host *host = nand_get_controller_data(chip);
+ struct pxa3xx_nand_info *info = host->info_data;
+ int nchunks = mtd->writesize / info->chunk_size;
+
+ if (section >= nchunks)
+ return -ERANGE;
+
+ oobregion->offset = ((info->ecc_size + info->spare_size) * section) +
+ info->spare_size;
+ oobregion->length = info->ecc_size;
+
+ return 0;
+}
+
+static int pxa3xx_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct pxa3xx_nand_host *host = nand_get_controller_data(chip);
+ struct pxa3xx_nand_info *info = host->info_data;
+ int nchunks = mtd->writesize / info->chunk_size;
+
+ if (section >= nchunks)
+ return -ERANGE;
+
+ if (!info->spare_size)
+ return 0;
+
+ oobregion->offset = section * (info->ecc_size + info->spare_size);
+ oobregion->length = info->spare_size;
+ if (!section) {
+ /*
+ * Bootrom looks in bytes 0 & 5 for bad blocks for the
+ * 4KB page / 4bit BCH combination.
+ */
+ if (mtd->writesize == 4096 && info->chunk_size == 2048) {
+ oobregion->offset += 6;
+ oobregion->length -= 6;
+ } else {
+ oobregion->offset += 2;
+ oobregion->length -= 2;
+ }
+ }
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops pxa3xx_ooblayout_ops = {
+ .ecc = pxa3xx_ooblayout_ecc,
+ .free = pxa3xx_ooblayout_free,
+};
+
static u8 bbt_pattern[] = {'M', 'V', 'B', 'b', 't', '0' };
static u8 bbt_mirror_pattern[] = {'1', 't', 'b', 'B', 'V', 'M' };
@@ -347,41 +402,6 @@ static struct nand_bbt_descr bbt_mirror_descr = {
.pattern = bbt_mirror_pattern
};
-static struct nand_ecclayout ecc_layout_2KB_bch4bit = {
- .eccbytes = 32,
- .eccpos = {
- 32, 33, 34, 35, 36, 37, 38, 39,
- 40, 41, 42, 43, 44, 45, 46, 47,
- 48, 49, 50, 51, 52, 53, 54, 55,
- 56, 57, 58, 59, 60, 61, 62, 63},
- .oobfree = { {2, 30} }
-};
-
-static struct nand_ecclayout ecc_layout_4KB_bch4bit = {
- .eccbytes = 64,
- .eccpos = {
- 32, 33, 34, 35, 36, 37, 38, 39,
- 40, 41, 42, 43, 44, 45, 46, 47,
- 48, 49, 50, 51, 52, 53, 54, 55,
- 56, 57, 58, 59, 60, 61, 62, 63,
- 96, 97, 98, 99, 100, 101, 102, 103,
- 104, 105, 106, 107, 108, 109, 110, 111,
- 112, 113, 114, 115, 116, 117, 118, 119,
- 120, 121, 122, 123, 124, 125, 126, 127},
- /* Bootrom looks in bytes 0 & 5 for bad blocks */
- .oobfree = { {6, 26}, { 64, 32} }
-};
-
-static struct nand_ecclayout ecc_layout_4KB_bch8bit = {
- .eccbytes = 128,
- .eccpos = {
- 32, 33, 34, 35, 36, 37, 38, 39,
- 40, 41, 42, 43, 44, 45, 46, 47,
- 48, 49, 50, 51, 52, 53, 54, 55,
- 56, 57, 58, 59, 60, 61, 62, 63},
- .oobfree = { }
-};
-
#define NDTR0_tCH(c) (min((c), 7) << 19)
#define NDTR0_tCS(c) (min((c), 7) << 16)
#define NDTR0_tWH(c) (min((c), 7) << 11)
@@ -1546,9 +1566,12 @@ static void pxa3xx_nand_free_buff(struct pxa3xx_nand_info *info)
}
static int pxa_ecc_init(struct pxa3xx_nand_info *info,
- struct nand_ecc_ctrl *ecc,
+ struct mtd_info *mtd,
int strength, int ecc_stepsize, int page_size)
{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+
if (strength == 1 && ecc_stepsize == 512 && page_size == 2048) {
info->nfullchunks = 1;
info->ntotalchunks = 1;
@@ -1582,7 +1605,7 @@ static int pxa_ecc_init(struct pxa3xx_nand_info *info,
info->ecc_size = 32;
ecc->mode = NAND_ECC_HW;
ecc->size = info->chunk_size;
- ecc->layout = &ecc_layout_2KB_bch4bit;
+ mtd_set_ooblayout(mtd, &pxa3xx_ooblayout_ops);
ecc->strength = 16;
} else if (strength == 4 && ecc_stepsize == 512 && page_size == 4096) {
@@ -1594,7 +1617,7 @@ static int pxa_ecc_init(struct pxa3xx_nand_info *info,
info->ecc_size = 32;
ecc->mode = NAND_ECC_HW;
ecc->size = info->chunk_size;
- ecc->layout = &ecc_layout_4KB_bch4bit;
+ mtd_set_ooblayout(mtd, &pxa3xx_ooblayout_ops);
ecc->strength = 16;
/*
@@ -1612,7 +1635,7 @@ static int pxa_ecc_init(struct pxa3xx_nand_info *info,
info->ecc_size = 32;
ecc->mode = NAND_ECC_HW;
ecc->size = info->chunk_size;
- ecc->layout = &ecc_layout_4KB_bch8bit;
+ mtd_set_ooblayout(mtd, &pxa3xx_ooblayout_ops);
ecc->strength = 16;
} else {
dev_err(&info->pdev->dev,
@@ -1651,6 +1674,12 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd)
if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370)
nand_writel(info, NDECCCTRL, 0x0);
+ if (pdata->flash_bbt)
+ chip->bbt_options |= NAND_BBT_USE_FLASH;
+
+ chip->ecc.strength = pdata->ecc_strength;
+ chip->ecc.size = pdata->ecc_step_size;
+
if (nand_scan_ident(mtd, 1, NULL))
return -ENODEV;
@@ -1663,13 +1692,12 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd)
}
}
- if (pdata->flash_bbt) {
+ if (chip->bbt_options & NAND_BBT_USE_FLASH) {
/*
* We'll use a bad block table stored in-flash and don't
* allow writing the bad block marker to the flash.
*/
- chip->bbt_options |= NAND_BBT_USE_FLASH |
- NAND_BBT_NO_OOB_BBM;
+ chip->bbt_options |= NAND_BBT_NO_OOB_BBM;
chip->bbt_td = &bbt_main_descr;
chip->bbt_md = &bbt_mirror_descr;
}
@@ -1689,10 +1717,9 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd)
}
}
- if (pdata->ecc_strength && pdata->ecc_step_size) {
- ecc_strength = pdata->ecc_strength;
- ecc_step = pdata->ecc_step_size;
- } else {
+ ecc_strength = chip->ecc.strength;
+ ecc_step = chip->ecc.size;
+ if (!ecc_strength || !ecc_step) {
ecc_strength = chip->ecc_strength_ds;
ecc_step = chip->ecc_step_ds;
}
@@ -1703,7 +1730,7 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd)
ecc_step = 512;
}
- ret = pxa_ecc_init(info, &chip->ecc, ecc_strength,
+ ret = pxa_ecc_init(info, mtd, ecc_strength,
ecc_step, mtd->writesize);
if (ret)
return ret;
@@ -1903,15 +1930,6 @@ static int pxa3xx_nand_probe_dt(struct platform_device *pdev)
if (of_get_property(np, "marvell,nand-keep-config", NULL))
pdata->keep_config = 1;
of_property_read_u32(np, "num-cs", &pdata->num_cs);
- pdata->flash_bbt = of_get_nand_on_flash_bbt(np);
-
- pdata->ecc_strength = of_get_nand_ecc_strength(np);
- if (pdata->ecc_strength < 0)
- pdata->ecc_strength = 0;
-
- pdata->ecc_step_size = of_get_nand_ecc_step_size(np);
- if (pdata->ecc_step_size < 0)
- pdata->ecc_step_size = 0;
pdev->dev.platform_data = pdata;
diff --git a/drivers/mtd/nand/qcom_nandc.c b/drivers/mtd/nand/qcom_nandc.c
index f550a57e6eea..de7d28e62d4e 100644
--- a/drivers/mtd/nand/qcom_nandc.c
+++ b/drivers/mtd/nand/qcom_nandc.c
@@ -21,7 +21,6 @@
#include <linux/mtd/partitions.h>
#include <linux/of.h>
#include <linux/of_device.h>
-#include <linux/of_mtd.h>
#include <linux/delay.h>
/* NANDc reg offsets */
@@ -1437,7 +1436,6 @@ static int qcom_nandc_write_oob(struct mtd_info *mtd, struct nand_chip *chip,
struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
struct nand_ecc_ctrl *ecc = &chip->ecc;
u8 *oob = chip->oob_poi;
- int free_boff;
int data_size, oob_size;
int ret, status = 0;
@@ -1451,12 +1449,11 @@ static int qcom_nandc_write_oob(struct mtd_info *mtd, struct nand_chip *chip,
/* calculate the data and oob size for the last codeword/step */
data_size = ecc->size - ((ecc->steps - 1) << 2);
- oob_size = ecc->steps << 2;
-
- free_boff = ecc->layout->oobfree[0].offset;
+ oob_size = mtd->oobavail;
/* override new oob content to last codeword */
- memcpy(nandc->data_buffer + data_size, oob + free_boff, oob_size);
+ mtd_ooblayout_get_databytes(mtd, nandc->data_buffer + data_size, oob,
+ 0, mtd->oobavail);
set_address(host, host->cw_size * (ecc->steps - 1), page);
update_rw_regs(host, 1, false);
@@ -1710,61 +1707,52 @@ static void qcom_nandc_select_chip(struct mtd_info *mtd, int chipnr)
* This layout is read as is when ECC is disabled. When ECC is enabled, the
* inaccessible Bad Block byte(s) are ignored when we write to a page/oob,
* and assumed as 0xffs when we read a page/oob. The ECC, unused and
- * dummy/real bad block bytes are grouped as ecc bytes in nand_ecclayout (i.e,
- * ecc->bytes is the sum of the three).
+ * dummy/real bad block bytes are grouped as ecc bytes (i.e, ecc->bytes is
+ * the sum of the three).
*/
-
-static struct nand_ecclayout *
-qcom_nand_create_layout(struct qcom_nand_host *host)
+static int qcom_nand_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
{
- struct nand_chip *chip = &host->chip;
- struct mtd_info *mtd = nand_to_mtd(chip);
- struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct qcom_nand_host *host = to_qcom_nand_host(chip);
struct nand_ecc_ctrl *ecc = &chip->ecc;
- struct nand_ecclayout *layout;
- int i, j, steps, pos = 0, shift = 0;
- layout = devm_kzalloc(nandc->dev, sizeof(*layout), GFP_KERNEL);
- if (!layout)
- return NULL;
-
- steps = mtd->writesize / ecc->size;
- layout->eccbytes = steps * ecc->bytes;
+ if (section > 1)
+ return -ERANGE;
- layout->oobfree[0].offset = (steps - 1) * ecc->bytes + host->bbm_size;
- layout->oobfree[0].length = steps << 2;
-
- /*
- * the oob bytes in the first n - 1 codewords are all grouped together
- * in the format:
- * DUMMY_BBM + UNUSED + ECC
- */
- for (i = 0; i < steps - 1; i++) {
- for (j = 0; j < ecc->bytes; j++)
- layout->eccpos[pos++] = i * ecc->bytes + j;
+ if (!section) {
+ oobregion->length = (ecc->bytes * (ecc->steps - 1)) +
+ host->bbm_size;
+ oobregion->offset = 0;
+ } else {
+ oobregion->length = host->ecc_bytes_hw + host->spare_bytes;
+ oobregion->offset = mtd->oobsize - oobregion->length;
}
- /*
- * the oob bytes in the last codeword are grouped in the format:
- * BBM + FREE OOB + UNUSED + ECC
- */
+ return 0;
+}
- /* fill up the bbm positions */
- for (j = 0; j < host->bbm_size; j++)
- layout->eccpos[pos++] = i * ecc->bytes + j;
+static int qcom_nand_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct qcom_nand_host *host = to_qcom_nand_host(chip);
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
- /*
- * fill up the ecc and reserved positions, their indices are offseted
- * by the free oob region
- */
- shift = layout->oobfree[0].length + host->bbm_size;
+ if (section)
+ return -ERANGE;
- for (j = 0; j < (host->ecc_bytes_hw + host->spare_bytes); j++)
- layout->eccpos[pos++] = i * ecc->bytes + shift + j;
+ oobregion->length = ecc->steps * 4;
+ oobregion->offset = ((ecc->steps - 1) * ecc->bytes) + host->bbm_size;
- return layout;
+ return 0;
}
+static const struct mtd_ooblayout_ops qcom_nand_ooblayout_ops = {
+ .ecc = qcom_nand_ooblayout_ecc,
+ .free = qcom_nand_ooblayout_free,
+};
+
static int qcom_nand_host_setup(struct qcom_nand_host *host)
{
struct nand_chip *chip = &host->chip;
@@ -1851,9 +1839,7 @@ static int qcom_nand_host_setup(struct qcom_nand_host *host)
ecc->mode = NAND_ECC_HW;
- ecc->layout = qcom_nand_create_layout(host);
- if (!ecc->layout)
- return -ENOMEM;
+ mtd_set_ooblayout(mtd, &qcom_nand_ooblayout_ops);
cwperpage = mtd->writesize / ecc->size;
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index 9c9397b54b2c..d9309cf0ce2e 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -84,11 +84,33 @@
/* new oob placement block for use with hardware ecc generation
*/
+static int s3c2410_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section)
+ return -ERANGE;
+
+ oobregion->offset = 0;
+ oobregion->length = 3;
+
+ return 0;
+}
+
+static int s3c2410_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section)
+ return -ERANGE;
+
+ oobregion->offset = 8;
+ oobregion->length = 8;
+
+ return 0;
+}
-static struct nand_ecclayout nand_hw_eccoob = {
- .eccbytes = 3,
- .eccpos = {0, 1, 2},
- .oobfree = {{8, 8}}
+static const struct mtd_ooblayout_ops s3c2410_ooblayout_ops = {
+ .ecc = s3c2410_ooblayout_ecc,
+ .free = s3c2410_ooblayout_free,
};
/* controller and mtd information */
@@ -542,7 +564,8 @@ static int s3c2410_nand_correct_data(struct mtd_info *mtd, u_char *dat,
diff0 |= (diff1 << 8);
diff0 |= (diff2 << 16);
- if ((diff0 & ~(1<<fls(diff0))) == 0)
+ /* equal to "(diff0 & ~(1 << __ffs(diff0)))" */
+ if ((diff0 & (diff0 - 1)) == 0)
return 1;
return -1;
@@ -859,6 +882,7 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
}
#else
chip->ecc.mode = NAND_ECC_SOFT;
+ chip->ecc.algo = NAND_ECC_HAMMING;
#endif
if (set->disable_ecc)
@@ -919,7 +943,7 @@ static void s3c2410_nand_update_chip(struct s3c2410_nand_info *info,
} else {
chip->ecc.size = 512;
chip->ecc.bytes = 3;
- chip->ecc.layout = &nand_hw_eccoob;
+ mtd_set_ooblayout(nand_to_mtd(chip), &s3c2410_ooblayout_ops);
}
}
diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c
index 4814402902f9..6fa3bcd59769 100644
--- a/drivers/mtd/nand/sh_flctl.c
+++ b/drivers/mtd/nand/sh_flctl.c
@@ -31,7 +31,6 @@
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_device.h>
-#include <linux/of_mtd.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/sh_dma.h>
@@ -43,26 +42,73 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/sh_flctl.h>
-static struct nand_ecclayout flctl_4secc_oob_16 = {
- .eccbytes = 10,
- .eccpos = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9},
- .oobfree = {
- {.offset = 12,
- . length = 4} },
+static int flctl_4secc_ooblayout_sp_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+
+ if (section)
+ return -ERANGE;
+
+ oobregion->offset = 0;
+ oobregion->length = chip->ecc.bytes;
+
+ return 0;
+}
+
+static int flctl_4secc_ooblayout_sp_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section)
+ return -ERANGE;
+
+ oobregion->offset = 12;
+ oobregion->length = 4;
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops flctl_4secc_oob_smallpage_ops = {
+ .ecc = flctl_4secc_ooblayout_sp_ecc,
+ .free = flctl_4secc_ooblayout_sp_free,
};
-static struct nand_ecclayout flctl_4secc_oob_64 = {
- .eccbytes = 4 * 10,
- .eccpos = {
- 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
- 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
- 38, 39, 40, 41, 42, 43, 44, 45, 46, 47,
- 54, 55, 56, 57, 58, 59, 60, 61, 62, 63 },
- .oobfree = {
- {.offset = 2, .length = 4},
- {.offset = 16, .length = 6},
- {.offset = 32, .length = 6},
- {.offset = 48, .length = 6} },
+static int flctl_4secc_ooblayout_lp_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+
+ if (section >= chip->ecc.steps)
+ return -ERANGE;
+
+ oobregion->offset = (section * 16) + 6;
+ oobregion->length = chip->ecc.bytes;
+
+ return 0;
+}
+
+static int flctl_4secc_ooblayout_lp_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+
+ if (section >= chip->ecc.steps)
+ return -ERANGE;
+
+ oobregion->offset = section * 16;
+ oobregion->length = 6;
+
+ if (!section) {
+ oobregion->offset += 2;
+ oobregion->length -= 2;
+ }
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops flctl_4secc_oob_largepage_ops = {
+ .ecc = flctl_4secc_ooblayout_lp_ecc,
+ .free = flctl_4secc_ooblayout_lp_free,
};
static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
@@ -987,10 +1033,10 @@ static int flctl_chip_init_tail(struct mtd_info *mtd)
if (flctl->hwecc) {
if (mtd->writesize == 512) {
- chip->ecc.layout = &flctl_4secc_oob_16;
+ mtd_set_ooblayout(mtd, &flctl_4secc_oob_smallpage_ops);
chip->badblock_pattern = &flctl_4secc_smallpage;
} else {
- chip->ecc.layout = &flctl_4secc_oob_64;
+ mtd_set_ooblayout(mtd, &flctl_4secc_oob_largepage_ops);
chip->badblock_pattern = &flctl_4secc_largepage;
}
@@ -1005,6 +1051,7 @@ static int flctl_chip_init_tail(struct mtd_info *mtd)
flctl->flcmncr_base |= _4ECCEN;
} else {
chip->ecc.mode = NAND_ECC_SOFT;
+ chip->ecc.algo = NAND_ECC_HAMMING;
}
return 0;
@@ -1044,8 +1091,6 @@ static struct sh_flctl_platform_data *flctl_parse_dt(struct device *dev)
const struct of_device_id *match;
struct flctl_soc_config *config;
struct sh_flctl_platform_data *pdata;
- struct device_node *dn = dev->of_node;
- int ret;
match = of_match_device(of_flctl_match, dev);
if (match)
@@ -1065,15 +1110,6 @@ static struct sh_flctl_platform_data *flctl_parse_dt(struct device *dev)
pdata->has_hwecc = config->has_hwecc;
pdata->use_holden = config->use_holden;
- /* parse user defined options */
- ret = of_get_nand_bus_width(dn);
- if (ret == 16)
- pdata->flcmncr_val |= SEL_16BIT;
- else if (ret != 8) {
- dev_err(dev, "%s: invalid bus width\n", __func__);
- return NULL;
- }
-
return pdata;
}
@@ -1136,15 +1172,14 @@ static int flctl_probe(struct platform_device *pdev)
nand->chip_delay = 20;
nand->read_byte = flctl_read_byte;
+ nand->read_word = flctl_read_word;
nand->write_buf = flctl_write_buf;
nand->read_buf = flctl_read_buf;
nand->select_chip = flctl_select_chip;
nand->cmdfunc = flctl_cmdfunc;
- if (pdata->flcmncr_val & SEL_16BIT) {
+ if (pdata->flcmncr_val & SEL_16BIT)
nand->options |= NAND_BUSWIDTH_16;
- nand->read_word = flctl_read_word;
- }
pm_runtime_enable(&pdev->dev);
pm_runtime_resume(&pdev->dev);
@@ -1155,6 +1190,16 @@ static int flctl_probe(struct platform_device *pdev)
if (ret)
goto err_chip;
+ if (nand->options & NAND_BUSWIDTH_16) {
+ /*
+ * NAND_BUSWIDTH_16 may have been set by nand_scan_ident().
+ * Add the SEL_16BIT flag in pdata->flcmncr_val and re-assign
+ * flctl->flcmncr_base to pdata->flcmncr_val.
+ */
+ pdata->flcmncr_val |= SEL_16BIT;
+ flctl->flcmncr_base = pdata->flcmncr_val;
+ }
+
ret = flctl_chip_init_tail(flctl_mtd);
if (ret)
goto err_chip;
diff --git a/drivers/mtd/nand/sharpsl.c b/drivers/mtd/nand/sharpsl.c
index b7d1b55a160b..064ca1757589 100644
--- a/drivers/mtd/nand/sharpsl.c
+++ b/drivers/mtd/nand/sharpsl.c
@@ -148,6 +148,7 @@ static int sharpsl_nand_probe(struct platform_device *pdev)
/* Link the private data with the MTD structure */
mtd = nand_to_mtd(this);
mtd->dev.parent = &pdev->dev;
+ mtd_set_ooblayout(mtd, data->ecc_layout);
platform_set_drvdata(pdev, sharpsl);
@@ -170,7 +171,6 @@ static int sharpsl_nand_probe(struct platform_device *pdev)
this->ecc.bytes = 3;
this->ecc.strength = 1;
this->badblock_pattern = data->badblock_pattern;
- this->ecc.layout = data->ecc_layout;
this->ecc.hwctl = sharpsl_nand_enable_hwecc;
this->ecc.calculate = sharpsl_nand_calculate_ecc;
this->ecc.correct = nand_correct_data;
diff --git a/drivers/mtd/nand/sm_common.c b/drivers/mtd/nand/sm_common.c
index c514740f9a83..5939dff253c2 100644
--- a/drivers/mtd/nand/sm_common.c
+++ b/drivers/mtd/nand/sm_common.c
@@ -12,14 +12,47 @@
#include <linux/sizes.h>
#include "sm_common.h"
-static struct nand_ecclayout nand_oob_sm = {
- .eccbytes = 6,
- .eccpos = {8, 9, 10, 13, 14, 15},
- .oobfree = {
- {.offset = 0 , .length = 4}, /* reserved */
- {.offset = 6 , .length = 2}, /* LBA1 */
- {.offset = 11, .length = 2} /* LBA2 */
+static int oob_sm_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section > 1)
+ return -ERANGE;
+
+ oobregion->length = 3;
+ oobregion->offset = ((section + 1) * 8) - 3;
+
+ return 0;
+}
+
+static int oob_sm_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ switch (section) {
+ case 0:
+ /* reserved */
+ oobregion->offset = 0;
+ oobregion->length = 4;
+ break;
+ case 1:
+ /* LBA1 */
+ oobregion->offset = 6;
+ oobregion->length = 2;
+ break;
+ case 2:
+ /* LBA2 */
+ oobregion->offset = 11;
+ oobregion->length = 2;
+ break;
+ default:
+ return -ERANGE;
}
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops oob_sm_ops = {
+ .ecc = oob_sm_ooblayout_ecc,
+ .free = oob_sm_ooblayout_free,
};
/* NOTE: This layout is is not compatabable with SmartMedia, */
@@ -28,15 +61,43 @@ static struct nand_ecclayout nand_oob_sm = {
/* If you use smftl, it will bypass this and work correctly */
/* If you not, then you break SmartMedia compliance anyway */
-static struct nand_ecclayout nand_oob_sm_small = {
- .eccbytes = 3,
- .eccpos = {0, 1, 2},
- .oobfree = {
- {.offset = 3 , .length = 2}, /* reserved */
- {.offset = 6 , .length = 2}, /* LBA1 */
+static int oob_sm_small_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section)
+ return -ERANGE;
+
+ oobregion->length = 3;
+ oobregion->offset = 0;
+
+ return 0;
+}
+
+static int oob_sm_small_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ switch (section) {
+ case 0:
+ /* reserved */
+ oobregion->offset = 3;
+ oobregion->length = 2;
+ break;
+ case 1:
+ /* LBA1 */
+ oobregion->offset = 6;
+ oobregion->length = 2;
+ break;
+ default:
+ return -ERANGE;
}
-};
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops oob_sm_small_ops = {
+ .ecc = oob_sm_small_ooblayout_ecc,
+ .free = oob_sm_small_ooblayout_free,
+};
static int sm_block_markbad(struct mtd_info *mtd, loff_t ofs)
{
@@ -121,9 +182,9 @@ int sm_register_device(struct mtd_info *mtd, int smartmedia)
/* ECC layout */
if (mtd->writesize == SM_SECTOR_SIZE)
- chip->ecc.layout = &nand_oob_sm;
+ mtd_set_ooblayout(mtd, &oob_sm_ops);
else if (mtd->writesize == SM_SMALL_PAGE)
- chip->ecc.layout = &nand_oob_sm_small;
+ mtd_set_ooblayout(mtd, &oob_sm_small_ops);
else
return -ENODEV;
diff --git a/drivers/mtd/nand/socrates_nand.c b/drivers/mtd/nand/socrates_nand.c
index e3305f9dd6fb..888fd314c62a 100644
--- a/drivers/mtd/nand/socrates_nand.c
+++ b/drivers/mtd/nand/socrates_nand.c
@@ -180,6 +180,7 @@ static int socrates_nand_probe(struct platform_device *ofdev)
nand_chip->dev_ready = socrates_nand_device_ready;
nand_chip->ecc.mode = NAND_ECC_SOFT; /* enable ECC */
+ nand_chip->ecc.algo = NAND_ECC_HAMMING;
/* TODO: I have no idea what real delay is. */
nand_chip->chip_delay = 20; /* 20us command delay time */
diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c
index 1c03eee44f3d..a83a690688b4 100644
--- a/drivers/mtd/nand/sunxi_nand.c
+++ b/drivers/mtd/nand/sunxi_nand.c
@@ -30,7 +30,6 @@
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_gpio.h>
-#include <linux/of_mtd.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
@@ -39,7 +38,7 @@
#include <linux/dmaengine.h>
#include <linux/gpio.h>
#include <linux/interrupt.h>
-#include <linux/io.h>
+#include <linux/iopoll.h>
#define NFC_REG_CTL 0x0000
#define NFC_REG_ST 0x0004
@@ -155,7 +154,7 @@
/* define bit use in NFC_ECC_ST */
#define NFC_ECC_ERR(x) BIT(x)
#define NFC_ECC_PAT_FOUND(x) BIT(x + 16)
-#define NFC_ECC_ERR_CNT(b, x) (((x) >> ((b) * 8)) & 0xff)
+#define NFC_ECC_ERR_CNT(b, x) (((x) >> (((b) % 4) * 8)) & 0xff)
#define NFC_DEFAULT_TIMEOUT_MS 1000
@@ -212,12 +211,9 @@ struct sunxi_nand_chip_sel {
* sunxi HW ECC infos: stores information related to HW ECC support
*
* @mode: the sunxi ECC mode field deduced from ECC requirements
- * @layout: the OOB layout depending on the ECC requirements and the
- * selected ECC mode
*/
struct sunxi_nand_hw_ecc {
int mode;
- struct nand_ecclayout layout;
};
/*
@@ -239,6 +235,10 @@ struct sunxi_nand_chip {
u32 timing_cfg;
u32 timing_ctl;
int selected;
+ int addr_cycles;
+ u32 addr[2];
+ int cmd_cycles;
+ u8 cmd[2];
int nsels;
struct sunxi_nand_chip_sel sels[0];
};
@@ -298,54 +298,71 @@ static irqreturn_t sunxi_nfc_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static int sunxi_nfc_wait_int(struct sunxi_nfc *nfc, u32 flags,
- unsigned int timeout_ms)
+static int sunxi_nfc_wait_events(struct sunxi_nfc *nfc, u32 events,
+ bool use_polling, unsigned int timeout_ms)
{
- init_completion(&nfc->complete);
+ int ret;
- writel(flags, nfc->regs + NFC_REG_INT);
+ if (events & ~NFC_INT_MASK)
+ return -EINVAL;
if (!timeout_ms)
timeout_ms = NFC_DEFAULT_TIMEOUT_MS;
- if (!wait_for_completion_timeout(&nfc->complete,
- msecs_to_jiffies(timeout_ms))) {
- dev_err(nfc->dev, "wait interrupt timedout\n");
- return -ETIMEDOUT;
+ if (!use_polling) {
+ init_completion(&nfc->complete);
+
+ writel(events, nfc->regs + NFC_REG_INT);
+
+ ret = wait_for_completion_timeout(&nfc->complete,
+ msecs_to_jiffies(timeout_ms));
+
+ writel(0, nfc->regs + NFC_REG_INT);
+ } else {
+ u32 status;
+
+ ret = readl_poll_timeout(nfc->regs + NFC_REG_ST, status,
+ (status & events) == events, 1,
+ timeout_ms * 1000);
}
- return 0;
+ writel(events & NFC_INT_MASK, nfc->regs + NFC_REG_ST);
+
+ if (ret)
+ dev_err(nfc->dev, "wait interrupt timedout\n");
+
+ return ret;
}
static int sunxi_nfc_wait_cmd_fifo_empty(struct sunxi_nfc *nfc)
{
- unsigned long timeout = jiffies +
- msecs_to_jiffies(NFC_DEFAULT_TIMEOUT_MS);
+ u32 status;
+ int ret;
- do {
- if (!(readl(nfc->regs + NFC_REG_ST) & NFC_CMD_FIFO_STATUS))
- return 0;
- } while (time_before(jiffies, timeout));
+ ret = readl_poll_timeout(nfc->regs + NFC_REG_ST, status,
+ !(status & NFC_CMD_FIFO_STATUS), 1,
+ NFC_DEFAULT_TIMEOUT_MS * 1000);
+ if (ret)
+ dev_err(nfc->dev, "wait for empty cmd FIFO timedout\n");
- dev_err(nfc->dev, "wait for empty cmd FIFO timedout\n");
- return -ETIMEDOUT;
+ return ret;
}
static int sunxi_nfc_rst(struct sunxi_nfc *nfc)
{
- unsigned long timeout = jiffies +
- msecs_to_jiffies(NFC_DEFAULT_TIMEOUT_MS);
+ u32 ctl;
+ int ret;
writel(0, nfc->regs + NFC_REG_ECC_CTL);
writel(NFC_RESET, nfc->regs + NFC_REG_CTL);
- do {
- if (!(readl(nfc->regs + NFC_REG_CTL) & NFC_RESET))
- return 0;
- } while (time_before(jiffies, timeout));
+ ret = readl_poll_timeout(nfc->regs + NFC_REG_CTL, ctl,
+ !(ctl & NFC_RESET), 1,
+ NFC_DEFAULT_TIMEOUT_MS * 1000);
+ if (ret)
+ dev_err(nfc->dev, "wait for NAND controller reset timedout\n");
- dev_err(nfc->dev, "wait for NAND controller reset timedout\n");
- return -ETIMEDOUT;
+ return ret;
}
static int sunxi_nfc_dev_ready(struct mtd_info *mtd)
@@ -354,7 +371,6 @@ static int sunxi_nfc_dev_ready(struct mtd_info *mtd)
struct sunxi_nand_chip *sunxi_nand = to_sunxi_nand(nand);
struct sunxi_nfc *nfc = to_sunxi_nfc(sunxi_nand->nand.controller);
struct sunxi_nand_rb *rb;
- unsigned long timeo = (sunxi_nand->nand.state == FL_ERASING ? 400 : 20);
int ret;
if (sunxi_nand->selected < 0)
@@ -366,12 +382,6 @@ static int sunxi_nfc_dev_ready(struct mtd_info *mtd)
case RB_NATIVE:
ret = !!(readl(nfc->regs + NFC_REG_ST) &
NFC_RB_STATE(rb->info.nativeid));
- if (ret)
- break;
-
- sunxi_nfc_wait_int(nfc, NFC_RB_B2R, timeo);
- ret = !!(readl(nfc->regs + NFC_REG_ST) &
- NFC_RB_STATE(rb->info.nativeid));
break;
case RB_GPIO:
ret = gpio_get_value(rb->info.gpio);
@@ -407,7 +417,7 @@ static void sunxi_nfc_select_chip(struct mtd_info *mtd, int chip)
sel = &sunxi_nand->sels[chip];
ctl |= NFC_CE_SEL(sel->cs) | NFC_EN |
- NFC_PAGE_SHIFT(nand->page_shift - 10);
+ NFC_PAGE_SHIFT(nand->page_shift);
if (sel->rb.type == RB_NONE) {
nand->dev_ready = NULL;
} else {
@@ -452,7 +462,7 @@ static void sunxi_nfc_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
tmp = NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD;
writel(tmp, nfc->regs + NFC_REG_CMD);
- ret = sunxi_nfc_wait_int(nfc, NFC_CMD_INT_FLAG, 0);
+ ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, true, 0);
if (ret)
break;
@@ -487,7 +497,7 @@ static void sunxi_nfc_write_buf(struct mtd_info *mtd, const uint8_t *buf,
NFC_ACCESS_DIR;
writel(tmp, nfc->regs + NFC_REG_CMD);
- ret = sunxi_nfc_wait_int(nfc, NFC_CMD_INT_FLAG, 0);
+ ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, true, 0);
if (ret)
break;
@@ -511,32 +521,54 @@ static void sunxi_nfc_cmd_ctrl(struct mtd_info *mtd, int dat,
struct sunxi_nand_chip *sunxi_nand = to_sunxi_nand(nand);
struct sunxi_nfc *nfc = to_sunxi_nfc(sunxi_nand->nand.controller);
int ret;
- u32 tmp;
ret = sunxi_nfc_wait_cmd_fifo_empty(nfc);
if (ret)
return;
- if (ctrl & NAND_CTRL_CHANGE) {
- tmp = readl(nfc->regs + NFC_REG_CTL);
- if (ctrl & NAND_NCE)
- tmp |= NFC_CE_CTL;
- else
- tmp &= ~NFC_CE_CTL;
- writel(tmp, nfc->regs + NFC_REG_CTL);
- }
+ if (dat == NAND_CMD_NONE && (ctrl & NAND_NCE) &&
+ !(ctrl & (NAND_CLE | NAND_ALE))) {
+ u32 cmd = 0;
- if (dat == NAND_CMD_NONE)
- return;
+ if (!sunxi_nand->addr_cycles && !sunxi_nand->cmd_cycles)
+ return;
- if (ctrl & NAND_CLE) {
- writel(NFC_SEND_CMD1 | dat, nfc->regs + NFC_REG_CMD);
- } else {
- writel(dat, nfc->regs + NFC_REG_ADDR_LOW);
- writel(NFC_SEND_ADR, nfc->regs + NFC_REG_CMD);
+ if (sunxi_nand->cmd_cycles--)
+ cmd |= NFC_SEND_CMD1 | sunxi_nand->cmd[0];
+
+ if (sunxi_nand->cmd_cycles--) {
+ cmd |= NFC_SEND_CMD2;
+ writel(sunxi_nand->cmd[1],
+ nfc->regs + NFC_REG_RCMD_SET);
+ }
+
+ sunxi_nand->cmd_cycles = 0;
+
+ if (sunxi_nand->addr_cycles) {
+ cmd |= NFC_SEND_ADR |
+ NFC_ADR_NUM(sunxi_nand->addr_cycles);
+ writel(sunxi_nand->addr[0],
+ nfc->regs + NFC_REG_ADDR_LOW);
+ }
+
+ if (sunxi_nand->addr_cycles > 4)
+ writel(sunxi_nand->addr[1],
+ nfc->regs + NFC_REG_ADDR_HIGH);
+
+ writel(cmd, nfc->regs + NFC_REG_CMD);
+ sunxi_nand->addr[0] = 0;
+ sunxi_nand->addr[1] = 0;
+ sunxi_nand->addr_cycles = 0;
+ sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, true, 0);
}
- sunxi_nfc_wait_int(nfc, NFC_CMD_INT_FLAG, 0);
+ if (ctrl & NAND_CLE) {
+ sunxi_nand->cmd[sunxi_nand->cmd_cycles++] = dat;
+ } else if (ctrl & NAND_ALE) {
+ sunxi_nand->addr[sunxi_nand->addr_cycles / 4] |=
+ dat << ((sunxi_nand->addr_cycles % 4) * 8);
+ sunxi_nand->addr_cycles++;
+ }
}
/* These seed values have been extracted from Allwinner's BSP */
@@ -717,7 +749,8 @@ static void sunxi_nfc_hw_ecc_enable(struct mtd_info *mtd)
ecc_ctl = readl(nfc->regs + NFC_REG_ECC_CTL);
ecc_ctl &= ~(NFC_ECC_MODE_MSK | NFC_ECC_PIPELINE |
NFC_ECC_BLOCK_SIZE_MSK);
- ecc_ctl |= NFC_ECC_EN | NFC_ECC_MODE(data->mode) | NFC_ECC_EXCEPTION;
+ ecc_ctl |= NFC_ECC_EN | NFC_ECC_MODE(data->mode) | NFC_ECC_EXCEPTION |
+ NFC_ECC_PIPELINE;
writel(ecc_ctl, nfc->regs + NFC_REG_ECC_CTL);
}
@@ -739,18 +772,106 @@ static inline void sunxi_nfc_user_data_to_buf(u32 user_data, u8 *buf)
buf[3] = user_data >> 24;
}
+static inline u32 sunxi_nfc_buf_to_user_data(const u8 *buf)
+{
+ return buf[0] | (buf[1] << 8) | (buf[2] << 16) | (buf[3] << 24);
+}
+
+static void sunxi_nfc_hw_ecc_get_prot_oob_bytes(struct mtd_info *mtd, u8 *oob,
+ int step, bool bbm, int page)
+{
+ struct nand_chip *nand = mtd_to_nand(mtd);
+ struct sunxi_nfc *nfc = to_sunxi_nfc(nand->controller);
+
+ sunxi_nfc_user_data_to_buf(readl(nfc->regs + NFC_REG_USER_DATA(step)),
+ oob);
+
+ /* De-randomize the Bad Block Marker. */
+ if (bbm && (nand->options & NAND_NEED_SCRAMBLING))
+ sunxi_nfc_randomize_bbm(mtd, page, oob);
+}
+
+static void sunxi_nfc_hw_ecc_set_prot_oob_bytes(struct mtd_info *mtd,
+ const u8 *oob, int step,
+ bool bbm, int page)
+{
+ struct nand_chip *nand = mtd_to_nand(mtd);
+ struct sunxi_nfc *nfc = to_sunxi_nfc(nand->controller);
+ u8 user_data[4];
+
+ /* Randomize the Bad Block Marker. */
+ if (bbm && (nand->options & NAND_NEED_SCRAMBLING)) {
+ memcpy(user_data, oob, sizeof(user_data));
+ sunxi_nfc_randomize_bbm(mtd, page, user_data);
+ oob = user_data;
+ }
+
+ writel(sunxi_nfc_buf_to_user_data(oob),
+ nfc->regs + NFC_REG_USER_DATA(step));
+}
+
+static void sunxi_nfc_hw_ecc_update_stats(struct mtd_info *mtd,
+ unsigned int *max_bitflips, int ret)
+{
+ if (ret < 0) {
+ mtd->ecc_stats.failed++;
+ } else {
+ mtd->ecc_stats.corrected += ret;
+ *max_bitflips = max_t(unsigned int, *max_bitflips, ret);
+ }
+}
+
+static int sunxi_nfc_hw_ecc_correct(struct mtd_info *mtd, u8 *data, u8 *oob,
+ int step, bool *erased)
+{
+ struct nand_chip *nand = mtd_to_nand(mtd);
+ struct sunxi_nfc *nfc = to_sunxi_nfc(nand->controller);
+ struct nand_ecc_ctrl *ecc = &nand->ecc;
+ u32 status, tmp;
+
+ *erased = false;
+
+ status = readl(nfc->regs + NFC_REG_ECC_ST);
+
+ if (status & NFC_ECC_ERR(step))
+ return -EBADMSG;
+
+ if (status & NFC_ECC_PAT_FOUND(step)) {
+ u8 pattern;
+
+ if (unlikely(!(readl(nfc->regs + NFC_REG_PAT_ID) & 0x1))) {
+ pattern = 0x0;
+ } else {
+ pattern = 0xff;
+ *erased = true;
+ }
+
+ if (data)
+ memset(data, pattern, ecc->size);
+
+ if (oob)
+ memset(oob, pattern, ecc->bytes + 4);
+
+ return 0;
+ }
+
+ tmp = readl(nfc->regs + NFC_REG_ECC_ERR_CNT(step));
+
+ return NFC_ECC_ERR_CNT(step, tmp);
+}
+
static int sunxi_nfc_hw_ecc_read_chunk(struct mtd_info *mtd,
u8 *data, int data_off,
u8 *oob, int oob_off,
int *cur_off,
unsigned int *max_bitflips,
- bool bbm, int page)
+ bool bbm, bool oob_required, int page)
{
struct nand_chip *nand = mtd_to_nand(mtd);
struct sunxi_nfc *nfc = to_sunxi_nfc(nand->controller);
struct nand_ecc_ctrl *ecc = &nand->ecc;
int raw_mode = 0;
- u32 status;
+ bool erased;
int ret;
if (*cur_off != data_off)
@@ -769,34 +890,19 @@ static int sunxi_nfc_hw_ecc_read_chunk(struct mtd_info *mtd,
writel(NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD | NFC_ECC_OP,
nfc->regs + NFC_REG_CMD);
- ret = sunxi_nfc_wait_int(nfc, NFC_CMD_INT_FLAG, 0);
+ ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, true, 0);
sunxi_nfc_randomizer_disable(mtd);
if (ret)
return ret;
*cur_off = oob_off + ecc->bytes + 4;
- status = readl(nfc->regs + NFC_REG_ECC_ST);
- if (status & NFC_ECC_PAT_FOUND(0)) {
- u8 pattern = 0xff;
-
- if (unlikely(!(readl(nfc->regs + NFC_REG_PAT_ID) & 0x1)))
- pattern = 0x0;
-
- memset(data, pattern, ecc->size);
- memset(oob, pattern, ecc->bytes + 4);
-
+ ret = sunxi_nfc_hw_ecc_correct(mtd, data, oob_required ? oob : NULL, 0,
+ &erased);
+ if (erased)
return 1;
- }
-
- ret = NFC_ECC_ERR_CNT(0, readl(nfc->regs + NFC_REG_ECC_ERR_CNT(0)));
-
- memcpy_fromio(data, nfc->regs + NFC_RAM0_BASE, ecc->size);
-
- nand->cmdfunc(mtd, NAND_CMD_RNDOUT, oob_off, -1);
- sunxi_nfc_randomizer_read_buf(mtd, oob, ecc->bytes + 4, true, page);
- if (status & NFC_ECC_ERR(0)) {
+ if (ret < 0) {
/*
* Re-read the data with the randomizer disabled to identify
* bitflips in erased pages.
@@ -804,35 +910,34 @@ static int sunxi_nfc_hw_ecc_read_chunk(struct mtd_info *mtd,
if (nand->options & NAND_NEED_SCRAMBLING) {
nand->cmdfunc(mtd, NAND_CMD_RNDOUT, data_off, -1);
nand->read_buf(mtd, data, ecc->size);
- nand->cmdfunc(mtd, NAND_CMD_RNDOUT, oob_off, -1);
- nand->read_buf(mtd, oob, ecc->bytes + 4);
+ } else {
+ memcpy_fromio(data, nfc->regs + NFC_RAM0_BASE,
+ ecc->size);
}
+ nand->cmdfunc(mtd, NAND_CMD_RNDOUT, oob_off, -1);
+ nand->read_buf(mtd, oob, ecc->bytes + 4);
+
ret = nand_check_erased_ecc_chunk(data, ecc->size,
oob, ecc->bytes + 4,
NULL, 0, ecc->strength);
if (ret >= 0)
raw_mode = 1;
} else {
- /*
- * The engine protects 4 bytes of OOB data per chunk.
- * Retrieve the corrected OOB bytes.
- */
- sunxi_nfc_user_data_to_buf(readl(nfc->regs + NFC_REG_USER_DATA(0)),
- oob);
+ memcpy_fromio(data, nfc->regs + NFC_RAM0_BASE, ecc->size);
- /* De-randomize the Bad Block Marker. */
- if (bbm && nand->options & NAND_NEED_SCRAMBLING)
- sunxi_nfc_randomize_bbm(mtd, page, oob);
- }
+ if (oob_required) {
+ nand->cmdfunc(mtd, NAND_CMD_RNDOUT, oob_off, -1);
+ sunxi_nfc_randomizer_read_buf(mtd, oob, ecc->bytes + 4,
+ true, page);
- if (ret < 0) {
- mtd->ecc_stats.failed++;
- } else {
- mtd->ecc_stats.corrected += ret;
- *max_bitflips = max_t(unsigned int, *max_bitflips, ret);
+ sunxi_nfc_hw_ecc_get_prot_oob_bytes(mtd, oob, 0,
+ bbm, page);
+ }
}
+ sunxi_nfc_hw_ecc_update_stats(mtd, max_bitflips, ret);
+
return raw_mode;
}
@@ -848,7 +953,7 @@ static void sunxi_nfc_hw_ecc_read_extra_oob(struct mtd_info *mtd,
if (len <= 0)
return;
- if (*cur_off != offset)
+ if (!cur_off || *cur_off != offset)
nand->cmdfunc(mtd, NAND_CMD_RNDOUT,
offset + mtd->writesize, -1);
@@ -858,12 +963,8 @@ static void sunxi_nfc_hw_ecc_read_extra_oob(struct mtd_info *mtd,
sunxi_nfc_randomizer_read_buf(mtd, oob + offset, len,
false, page);
- *cur_off = mtd->oobsize + mtd->writesize;
-}
-
-static inline u32 sunxi_nfc_buf_to_user_data(const u8 *buf)
-{
- return buf[0] | (buf[1] << 8) | (buf[2] << 16) | (buf[3] << 24);
+ if (cur_off)
+ *cur_off = mtd->oobsize + mtd->writesize;
}
static int sunxi_nfc_hw_ecc_write_chunk(struct mtd_info *mtd,
@@ -882,19 +983,6 @@ static int sunxi_nfc_hw_ecc_write_chunk(struct mtd_info *mtd,
sunxi_nfc_randomizer_write_buf(mtd, data, ecc->size, false, page);
- /* Fill OOB data in */
- if ((nand->options & NAND_NEED_SCRAMBLING) && bbm) {
- u8 user_data[4];
-
- memcpy(user_data, oob, 4);
- sunxi_nfc_randomize_bbm(mtd, page, user_data);
- writel(sunxi_nfc_buf_to_user_data(user_data),
- nfc->regs + NFC_REG_USER_DATA(0));
- } else {
- writel(sunxi_nfc_buf_to_user_data(oob),
- nfc->regs + NFC_REG_USER_DATA(0));
- }
-
if (data_off + ecc->size != oob_off)
nand->cmdfunc(mtd, NAND_CMD_RNDIN, oob_off, -1);
@@ -903,11 +991,13 @@ static int sunxi_nfc_hw_ecc_write_chunk(struct mtd_info *mtd,
return ret;
sunxi_nfc_randomizer_enable(mtd);
+ sunxi_nfc_hw_ecc_set_prot_oob_bytes(mtd, oob, 0, bbm, page);
+
writel(NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD |
NFC_ACCESS_DIR | NFC_ECC_OP,
nfc->regs + NFC_REG_CMD);
- ret = sunxi_nfc_wait_int(nfc, NFC_CMD_INT_FLAG, 0);
+ ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, true, 0);
sunxi_nfc_randomizer_disable(mtd);
if (ret)
return ret;
@@ -929,13 +1019,14 @@ static void sunxi_nfc_hw_ecc_write_extra_oob(struct mtd_info *mtd,
if (len <= 0)
return;
- if (*cur_off != offset)
+ if (!cur_off || *cur_off != offset)
nand->cmdfunc(mtd, NAND_CMD_RNDIN,
offset + mtd->writesize, -1);
sunxi_nfc_randomizer_write_buf(mtd, oob + offset, len, false, page);
- *cur_off = mtd->oobsize + mtd->writesize;
+ if (cur_off)
+ *cur_off = mtd->oobsize + mtd->writesize;
}
static int sunxi_nfc_hw_ecc_read_page(struct mtd_info *mtd,
@@ -958,7 +1049,7 @@ static int sunxi_nfc_hw_ecc_read_page(struct mtd_info *mtd,
ret = sunxi_nfc_hw_ecc_read_chunk(mtd, data, data_off, oob,
oob_off + mtd->writesize,
&cur_off, &max_bitflips,
- !i, page);
+ !i, oob_required, page);
if (ret < 0)
return ret;
else if (ret)
@@ -974,6 +1065,39 @@ static int sunxi_nfc_hw_ecc_read_page(struct mtd_info *mtd,
return max_bitflips;
}
+static int sunxi_nfc_hw_ecc_read_subpage(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ u32 data_offs, u32 readlen,
+ u8 *bufpoi, int page)
+{
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+ int ret, i, cur_off = 0;
+ unsigned int max_bitflips = 0;
+
+ sunxi_nfc_hw_ecc_enable(mtd);
+
+ chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
+ for (i = data_offs / ecc->size;
+ i < DIV_ROUND_UP(data_offs + readlen, ecc->size); i++) {
+ int data_off = i * ecc->size;
+ int oob_off = i * (ecc->bytes + 4);
+ u8 *data = bufpoi + data_off;
+ u8 *oob = chip->oob_poi + oob_off;
+
+ ret = sunxi_nfc_hw_ecc_read_chunk(mtd, data, data_off,
+ oob,
+ oob_off + mtd->writesize,
+ &cur_off, &max_bitflips, !i,
+ false, page);
+ if (ret < 0)
+ return ret;
+ }
+
+ sunxi_nfc_hw_ecc_disable(mtd);
+
+ return max_bitflips;
+}
+
static int sunxi_nfc_hw_ecc_write_page(struct mtd_info *mtd,
struct nand_chip *chip,
const uint8_t *buf, int oob_required,
@@ -1026,7 +1150,9 @@ static int sunxi_nfc_hw_syndrome_ecc_read_page(struct mtd_info *mtd,
ret = sunxi_nfc_hw_ecc_read_chunk(mtd, data, data_off, oob,
oob_off, &cur_off,
- &max_bitflips, !i, page);
+ &max_bitflips, !i,
+ oob_required,
+ page);
if (ret < 0)
return ret;
else if (ret)
@@ -1074,6 +1200,40 @@ static int sunxi_nfc_hw_syndrome_ecc_write_page(struct mtd_info *mtd,
return 0;
}
+static int sunxi_nfc_hw_common_ecc_read_oob(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ int page)
+{
+ chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
+
+ chip->pagebuf = -1;
+
+ return chip->ecc.read_page(mtd, chip, chip->buffers->databuf, 1, page);
+}
+
+static int sunxi_nfc_hw_common_ecc_write_oob(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ int page)
+{
+ int ret, status;
+
+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0, page);
+
+ chip->pagebuf = -1;
+
+ memset(chip->buffers->databuf, 0xff, mtd->writesize);
+ ret = chip->ecc.write_page(mtd, chip, chip->buffers->databuf, 1, page);
+ if (ret)
+ return ret;
+
+ /* Send command to program the OOB data */
+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+
+ status = chip->waitfunc(mtd, chip);
+
+ return status & NAND_STATUS_FAIL ? -EIO : 0;
+}
+
static const s32 tWB_lut[] = {6, 12, 16, 20};
static const s32 tRHW_lut[] = {4, 8, 12, 20};
@@ -1101,6 +1261,7 @@ static int sunxi_nand_chip_set_timings(struct sunxi_nand_chip *chip,
struct sunxi_nfc *nfc = to_sunxi_nfc(chip->nand.controller);
u32 min_clk_period = 0;
s32 tWB, tADL, tWHR, tRHW, tCAD;
+ long real_clk_rate;
/* T1 <=> tCLS */
if (timings->tCLS_min > min_clk_period)
@@ -1163,6 +1324,18 @@ static int sunxi_nand_chip_set_timings(struct sunxi_nand_chip *chip,
min_clk_period = DIV_ROUND_UP(timings->tWC_min, 2);
/* T16 - T19 + tCAD */
+ if (timings->tWB_max > (min_clk_period * 20))
+ min_clk_period = DIV_ROUND_UP(timings->tWB_max, 20);
+
+ if (timings->tADL_min > (min_clk_period * 32))
+ min_clk_period = DIV_ROUND_UP(timings->tADL_min, 32);
+
+ if (timings->tWHR_min > (min_clk_period * 32))
+ min_clk_period = DIV_ROUND_UP(timings->tWHR_min, 32);
+
+ if (timings->tRHW_min > (min_clk_period * 20))
+ min_clk_period = DIV_ROUND_UP(timings->tRHW_min, 20);
+
tWB = sunxi_nand_lookup_timing(tWB_lut, timings->tWB_max,
min_clk_period);
if (tWB < 0) {
@@ -1198,23 +1371,26 @@ static int sunxi_nand_chip_set_timings(struct sunxi_nand_chip *chip,
/* TODO: A83 has some more bits for CDQSS, CS, CLHZ, CCS, WC */
chip->timing_cfg = NFC_TIMING_CFG(tWB, tADL, tWHR, tRHW, tCAD);
- /*
- * ONFI specification 3.1, paragraph 4.15.2 dictates that EDO data
- * output cycle timings shall be used if the host drives tRC less than
- * 30 ns.
- */
- chip->timing_ctl = (timings->tRC_min < 30000) ? NFC_TIMING_CTL_EDO : 0;
-
/* Convert min_clk_period from picoseconds to nanoseconds */
min_clk_period = DIV_ROUND_UP(min_clk_period, 1000);
/*
- * Convert min_clk_period into a clk frequency, then get the
- * appropriate rate for the NAND controller IP given this formula
- * (specified in the datasheet):
- * nand clk_rate = 2 * min_clk_rate
+ * Unlike what is stated in Allwinner datasheet, the clk_rate should
+ * be set to (1 / min_clk_period), and not (2 / min_clk_period).
+ * This new formula was verified with a scope and validated by
+ * Allwinner engineers.
*/
- chip->clk_rate = (2 * NSEC_PER_SEC) / min_clk_period;
+ chip->clk_rate = NSEC_PER_SEC / min_clk_period;
+ real_clk_rate = clk_round_rate(nfc->mod_clk, chip->clk_rate);
+
+ /*
+ * ONFI specification 3.1, paragraph 4.15.2 dictates that EDO data
+ * output cycle timings shall be used if the host drives tRC less than
+ * 30 ns.
+ */
+ min_clk_period = NSEC_PER_SEC / real_clk_rate;
+ chip->timing_ctl = ((min_clk_period * 2) < 30) ?
+ NFC_TIMING_CTL_EDO : 0;
return 0;
}
@@ -1257,6 +1433,57 @@ static int sunxi_nand_chip_init_timings(struct sunxi_nand_chip *chip,
return sunxi_nand_chip_set_timings(chip, timings);
}
+static int sunxi_nand_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *nand = mtd_to_nand(mtd);
+ struct nand_ecc_ctrl *ecc = &nand->ecc;
+
+ if (section >= ecc->steps)
+ return -ERANGE;
+
+ oobregion->offset = section * (ecc->bytes + 4) + 4;
+ oobregion->length = ecc->bytes;
+
+ return 0;
+}
+
+static int sunxi_nand_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *nand = mtd_to_nand(mtd);
+ struct nand_ecc_ctrl *ecc = &nand->ecc;
+
+ if (section > ecc->steps)
+ return -ERANGE;
+
+ /*
+ * The first 2 bytes are used for BB markers, hence we
+ * only have 2 bytes available in the first user data
+ * section.
+ */
+ if (!section && ecc->mode == NAND_ECC_HW) {
+ oobregion->offset = 2;
+ oobregion->length = 2;
+
+ return 0;
+ }
+
+ oobregion->offset = section * (ecc->bytes + 4);
+
+ if (section < ecc->steps)
+ oobregion->length = 4;
+ else
+ oobregion->offset = mtd->oobsize - oobregion->offset;
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops sunxi_nand_ooblayout_ops = {
+ .ecc = sunxi_nand_ooblayout_ecc,
+ .free = sunxi_nand_ooblayout_free,
+};
+
static int sunxi_nand_hw_common_ecc_ctrl_init(struct mtd_info *mtd,
struct nand_ecc_ctrl *ecc,
struct device_node *np)
@@ -1266,7 +1493,6 @@ static int sunxi_nand_hw_common_ecc_ctrl_init(struct mtd_info *mtd,
struct sunxi_nand_chip *sunxi_nand = to_sunxi_nand(nand);
struct sunxi_nfc *nfc = to_sunxi_nfc(sunxi_nand->nand.controller);
struct sunxi_nand_hw_ecc *data;
- struct nand_ecclayout *layout;
int nsectors;
int ret;
int i;
@@ -1295,7 +1521,6 @@ static int sunxi_nand_hw_common_ecc_ctrl_init(struct mtd_info *mtd,
/* HW ECC always work with even numbers of ECC bytes */
ecc->bytes = ALIGN(ecc->bytes, 2);
- layout = &data->layout;
nsectors = mtd->writesize / ecc->size;
if (mtd->oobsize < ((ecc->bytes + 4) * nsectors)) {
@@ -1303,9 +1528,9 @@ static int sunxi_nand_hw_common_ecc_ctrl_init(struct mtd_info *mtd,
goto err;
}
- layout->eccbytes = (ecc->bytes * nsectors);
-
- ecc->layout = layout;
+ ecc->read_oob = sunxi_nfc_hw_common_ecc_read_oob;
+ ecc->write_oob = sunxi_nfc_hw_common_ecc_write_oob;
+ mtd_set_ooblayout(mtd, &sunxi_nand_ooblayout_ops);
ecc->priv = data;
return 0;
@@ -1325,9 +1550,6 @@ static int sunxi_nand_hw_ecc_ctrl_init(struct mtd_info *mtd,
struct nand_ecc_ctrl *ecc,
struct device_node *np)
{
- struct nand_ecclayout *layout;
- int nsectors;
- int i, j;
int ret;
ret = sunxi_nand_hw_common_ecc_ctrl_init(mtd, ecc, np);
@@ -1336,40 +1558,9 @@ static int sunxi_nand_hw_ecc_ctrl_init(struct mtd_info *mtd,
ecc->read_page = sunxi_nfc_hw_ecc_read_page;
ecc->write_page = sunxi_nfc_hw_ecc_write_page;
- layout = ecc->layout;
- nsectors = mtd->writesize / ecc->size;
-
- for (i = 0; i < nsectors; i++) {
- if (i) {
- layout->oobfree[i].offset =
- layout->oobfree[i - 1].offset +
- layout->oobfree[i - 1].length +
- ecc->bytes;
- layout->oobfree[i].length = 4;
- } else {
- /*
- * The first 2 bytes are used for BB markers, hence we
- * only have 2 bytes available in the first user data
- * section.
- */
- layout->oobfree[i].length = 2;
- layout->oobfree[i].offset = 2;
- }
-
- for (j = 0; j < ecc->bytes; j++)
- layout->eccpos[(ecc->bytes * i) + j] =
- layout->oobfree[i].offset +
- layout->oobfree[i].length + j;
- }
-
- if (mtd->oobsize > (ecc->bytes + 4) * nsectors) {
- layout->oobfree[nsectors].offset =
- layout->oobfree[nsectors - 1].offset +
- layout->oobfree[nsectors - 1].length +
- ecc->bytes;
- layout->oobfree[nsectors].length = mtd->oobsize -
- ((ecc->bytes + 4) * nsectors);
- }
+ ecc->read_oob_raw = nand_read_oob_std;
+ ecc->write_oob_raw = nand_write_oob_std;
+ ecc->read_subpage = sunxi_nfc_hw_ecc_read_subpage;
return 0;
}
@@ -1378,9 +1569,6 @@ static int sunxi_nand_hw_syndrome_ecc_ctrl_init(struct mtd_info *mtd,
struct nand_ecc_ctrl *ecc,
struct device_node *np)
{
- struct nand_ecclayout *layout;
- int nsectors;
- int i;
int ret;
ret = sunxi_nand_hw_common_ecc_ctrl_init(mtd, ecc, np);
@@ -1390,15 +1578,8 @@ static int sunxi_nand_hw_syndrome_ecc_ctrl_init(struct mtd_info *mtd,
ecc->prepad = 4;
ecc->read_page = sunxi_nfc_hw_syndrome_ecc_read_page;
ecc->write_page = sunxi_nfc_hw_syndrome_ecc_write_page;
-
- layout = ecc->layout;
- nsectors = mtd->writesize / ecc->size;
-
- for (i = 0; i < (ecc->bytes * nsectors); i++)
- layout->eccpos[i] = i;
-
- layout->oobfree[0].length = mtd->oobsize - i;
- layout->oobfree[0].offset = i;
+ ecc->read_oob_raw = nand_read_oob_syndrome;
+ ecc->write_oob_raw = nand_write_oob_syndrome;
return 0;
}
@@ -1411,7 +1592,6 @@ static void sunxi_nand_ecc_cleanup(struct nand_ecc_ctrl *ecc)
sunxi_nand_hw_common_ecc_ctrl_cleanup(ecc);
break;
case NAND_ECC_NONE:
- kfree(ecc->layout);
default:
break;
}
@@ -1432,8 +1612,6 @@ static int sunxi_nand_ecc_init(struct mtd_info *mtd, struct nand_ecc_ctrl *ecc,
return -EINVAL;
switch (ecc->mode) {
- case NAND_ECC_SOFT_BCH:
- break;
case NAND_ECC_HW:
ret = sunxi_nand_hw_ecc_ctrl_init(mtd, ecc, np);
if (ret)
@@ -1445,10 +1623,6 @@ static int sunxi_nand_ecc_init(struct mtd_info *mtd, struct nand_ecc_ctrl *ecc,
return ret;
break;
case NAND_ECC_NONE:
- ecc->layout = kzalloc(sizeof(*ecc->layout), GFP_KERNEL);
- if (!ecc->layout)
- return -ENOMEM;
- ecc->layout->oobfree[0].length = mtd->oobsize;
case NAND_ECC_SOFT:
break;
default:
@@ -1536,21 +1710,6 @@ static int sunxi_nand_chip_init(struct device *dev, struct sunxi_nfc *nfc,
}
}
- timings = onfi_async_timing_mode_to_sdr_timings(0);
- if (IS_ERR(timings)) {
- ret = PTR_ERR(timings);
- dev_err(dev,
- "could not retrieve timings for ONFI mode 0: %d\n",
- ret);
- return ret;
- }
-
- ret = sunxi_nand_chip_set_timings(chip, timings);
- if (ret) {
- dev_err(dev, "could not configure chip timings: %d\n", ret);
- return ret;
- }
-
nand = &chip->nand;
/* Default tR value specified in the ONFI spec (chapter 4.15.1) */
nand->chip_delay = 200;
@@ -1570,6 +1729,21 @@ static int sunxi_nand_chip_init(struct device *dev, struct sunxi_nfc *nfc,
mtd = nand_to_mtd(nand);
mtd->dev.parent = dev;
+ timings = onfi_async_timing_mode_to_sdr_timings(0);
+ if (IS_ERR(timings)) {
+ ret = PTR_ERR(timings);
+ dev_err(dev,
+ "could not retrieve timings for ONFI mode 0: %d\n",
+ ret);
+ return ret;
+ }
+
+ ret = sunxi_nand_chip_set_timings(chip, timings);
+ if (ret) {
+ dev_err(dev, "could not configure chip timings: %d\n", ret);
+ return ret;
+ }
+
ret = nand_scan_ident(mtd, nsels, NULL);
if (ret)
return ret;
@@ -1580,6 +1754,8 @@ static int sunxi_nand_chip_init(struct device *dev, struct sunxi_nfc *nfc,
if (nand->options & NAND_NEED_SCRAMBLING)
nand->options |= NAND_NO_SUBPAGE_WRITE;
+ nand->options |= NAND_SUBPAGE_READ;
+
ret = sunxi_nand_chip_init_timings(chip, np);
if (ret) {
dev_err(dev, "could not configure chip timings: %d\n", ret);
@@ -1728,6 +1904,8 @@ static int sunxi_nfc_remove(struct platform_device *pdev)
struct sunxi_nfc *nfc = platform_get_drvdata(pdev);
sunxi_nand_chips_cleanup(nfc);
+ clk_disable_unprepare(nfc->mod_clk);
+ clk_disable_unprepare(nfc->ahb_clk);
return 0;
}
diff --git a/drivers/mtd/nand/vf610_nfc.c b/drivers/mtd/nand/vf610_nfc.c
index 293feb19b0b1..3ad514c44dcb 100644
--- a/drivers/mtd/nand/vf610_nfc.c
+++ b/drivers/mtd/nand/vf610_nfc.c
@@ -33,7 +33,6 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
-#include <linux/of_mtd.h>
#include <linux/of_device.h>
#include <linux/pinctrl/consumer.h>
#include <linux/platform_device.h>
@@ -175,34 +174,6 @@ static inline struct vf610_nfc *mtd_to_nfc(struct mtd_info *mtd)
return container_of(mtd_to_nand(mtd), struct vf610_nfc, chip);
}
-static struct nand_ecclayout vf610_nfc_ecc45 = {
- .eccbytes = 45,
- .eccpos = {19, 20, 21, 22, 23,
- 24, 25, 26, 27, 28, 29, 30, 31,
- 32, 33, 34, 35, 36, 37, 38, 39,
- 40, 41, 42, 43, 44, 45, 46, 47,
- 48, 49, 50, 51, 52, 53, 54, 55,
- 56, 57, 58, 59, 60, 61, 62, 63},
- .oobfree = {
- {.offset = 2,
- .length = 17} }
-};
-
-static struct nand_ecclayout vf610_nfc_ecc60 = {
- .eccbytes = 60,
- .eccpos = { 4, 5, 6, 7, 8, 9, 10, 11,
- 12, 13, 14, 15, 16, 17, 18, 19,
- 20, 21, 22, 23, 24, 25, 26, 27,
- 28, 29, 30, 31, 32, 33, 34, 35,
- 36, 37, 38, 39, 40, 41, 42, 43,
- 44, 45, 46, 47, 48, 49, 50, 51,
- 52, 53, 54, 55, 56, 57, 58, 59,
- 60, 61, 62, 63 },
- .oobfree = {
- {.offset = 2,
- .length = 2} }
-};
-
static inline u32 vf610_nfc_read(struct vf610_nfc *nfc, uint reg)
{
return readl(nfc->regs + reg);
@@ -781,14 +752,16 @@ static int vf610_nfc_probe(struct platform_device *pdev)
if (mtd->oobsize > 64)
mtd->oobsize = 64;
+ /*
+ * mtd->ecclayout is not specified here because we're using the
+ * default large page ECC layout defined in NAND core.
+ */
if (chip->ecc.strength == 32) {
nfc->ecc_mode = ECC_60_BYTE;
chip->ecc.bytes = 60;
- chip->ecc.layout = &vf610_nfc_ecc60;
} else if (chip->ecc.strength == 24) {
nfc->ecc_mode = ECC_45_BYTE;
chip->ecc.bytes = 45;
- chip->ecc.layout = &vf610_nfc_ecc45;
} else {
dev_err(nfc->dev, "Unsupported ECC strength\n");
err = -ENXIO;
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index af28bb3ae7cf..a4b029a417f0 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -68,21 +68,33 @@ MODULE_PARM_DESC(otp, "Corresponding behaviour of OneNAND in OTP"
* flexonenand_oob_128 - oob info for Flex-Onenand with 4KB page
* For now, we expose only 64 out of 80 ecc bytes
*/
-static struct nand_ecclayout flexonenand_oob_128 = {
- .eccbytes = 64,
- .eccpos = {
- 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
- 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
- 38, 39, 40, 41, 42, 43, 44, 45, 46, 47,
- 54, 55, 56, 57, 58, 59, 60, 61, 62, 63,
- 70, 71, 72, 73, 74, 75, 76, 77, 78, 79,
- 86, 87, 88, 89, 90, 91, 92, 93, 94, 95,
- 102, 103, 104, 105
- },
- .oobfree = {
- {2, 4}, {18, 4}, {34, 4}, {50, 4},
- {66, 4}, {82, 4}, {98, 4}, {114, 4}
- }
+static int flexonenand_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section > 7)
+ return -ERANGE;
+
+ oobregion->offset = (section * 16) + 6;
+ oobregion->length = 10;
+
+ return 0;
+}
+
+static int flexonenand_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section > 7)
+ return -ERANGE;
+
+ oobregion->offset = (section * 16) + 2;
+ oobregion->length = 4;
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops flexonenand_ooblayout_ops = {
+ .ecc = flexonenand_ooblayout_ecc,
+ .free = flexonenand_ooblayout_free,
};
/*
@@ -91,56 +103,77 @@ static struct nand_ecclayout flexonenand_oob_128 = {
* Based on specification:
* 4Gb M-die OneNAND Flash (KFM4G16Q4M, KFN8G16Q4M). Rev. 1.3, Apr. 2010
*
- * For eccpos we expose only 64 bytes out of 72 (see struct nand_ecclayout)
- *
- * oobfree uses the spare area fields marked as
- * "Managed by internal ECC logic for Logical Sector Number area"
*/
-static struct nand_ecclayout onenand_oob_128 = {
- .eccbytes = 64,
- .eccpos = {
- 7, 8, 9, 10, 11, 12, 13, 14, 15,
- 23, 24, 25, 26, 27, 28, 29, 30, 31,
- 39, 40, 41, 42, 43, 44, 45, 46, 47,
- 55, 56, 57, 58, 59, 60, 61, 62, 63,
- 71, 72, 73, 74, 75, 76, 77, 78, 79,
- 87, 88, 89, 90, 91, 92, 93, 94, 95,
- 103, 104, 105, 106, 107, 108, 109, 110, 111,
- 119
- },
- .oobfree = {
- {2, 3}, {18, 3}, {34, 3}, {50, 3},
- {66, 3}, {82, 3}, {98, 3}, {114, 3}
- }
+static int onenand_ooblayout_128_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section > 7)
+ return -ERANGE;
+
+ oobregion->offset = (section * 16) + 7;
+ oobregion->length = 9;
+
+ return 0;
+}
+
+static int onenand_ooblayout_128_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section >= 8)
+ return -ERANGE;
+
+ /*
+ * free bytes are using the spare area fields marked as
+ * "Managed by internal ECC logic for Logical Sector Number area"
+ */
+ oobregion->offset = (section * 16) + 2;
+ oobregion->length = 3;
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops onenand_oob_128_ooblayout_ops = {
+ .ecc = onenand_ooblayout_128_ecc,
+ .free = onenand_ooblayout_128_free,
};
/**
- * onenand_oob_64 - oob info for large (2KB) page
+ * onenand_oob_32_64 - oob info for large (2KB) page
*/
-static struct nand_ecclayout onenand_oob_64 = {
- .eccbytes = 20,
- .eccpos = {
- 8, 9, 10, 11, 12,
- 24, 25, 26, 27, 28,
- 40, 41, 42, 43, 44,
- 56, 57, 58, 59, 60,
- },
- .oobfree = {
- {2, 3}, {14, 2}, {18, 3}, {30, 2},
- {34, 3}, {46, 2}, {50, 3}, {62, 2}
+static int onenand_ooblayout_32_64_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section > 3)
+ return -ERANGE;
+
+ oobregion->offset = (section * 16) + 8;
+ oobregion->length = 5;
+
+ return 0;
+}
+
+static int onenand_ooblayout_32_64_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ int sections = (mtd->oobsize / 32) * 2;
+
+ if (section >= sections)
+ return -ERANGE;
+
+ if (section & 1) {
+ oobregion->offset = ((section - 1) * 16) + 14;
+ oobregion->length = 2;
+ } else {
+ oobregion->offset = (section * 16) + 2;
+ oobregion->length = 3;
}
-};
-/**
- * onenand_oob_32 - oob info for middle (1KB) page
- */
-static struct nand_ecclayout onenand_oob_32 = {
- .eccbytes = 10,
- .eccpos = {
- 8, 9, 10, 11, 12,
- 24, 25, 26, 27, 28,
- },
- .oobfree = { {2, 3}, {14, 2}, {18, 3}, {30, 2} }
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops onenand_oob_32_64_ooblayout_ops = {
+ .ecc = onenand_ooblayout_32_64_ecc,
+ .free = onenand_ooblayout_32_64_free,
};
static const unsigned char ffchars[] = {
@@ -1024,34 +1057,15 @@ static int onenand_transfer_auto_oob(struct mtd_info *mtd, uint8_t *buf, int col
int thislen)
{
struct onenand_chip *this = mtd->priv;
- struct nand_oobfree *free;
- int readcol = column;
- int readend = column + thislen;
- int lastgap = 0;
- unsigned int i;
- uint8_t *oob_buf = this->oob_buf;
-
- free = this->ecclayout->oobfree;
- for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) {
- if (readcol >= lastgap)
- readcol += free->offset - lastgap;
- if (readend >= lastgap)
- readend += free->offset - lastgap;
- lastgap = free->offset + free->length;
- }
- this->read_bufferram(mtd, ONENAND_SPARERAM, oob_buf, 0, mtd->oobsize);
- free = this->ecclayout->oobfree;
- for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) {
- int free_end = free->offset + free->length;
- if (free->offset < readend && free_end > readcol) {
- int st = max_t(int,free->offset,readcol);
- int ed = min_t(int,free_end,readend);
- int n = ed - st;
- memcpy(buf, oob_buf + st, n);
- buf += n;
- } else if (column == 0)
- break;
- }
+ int ret;
+
+ this->read_bufferram(mtd, ONENAND_SPARERAM, this->oob_buf, 0,
+ mtd->oobsize);
+ ret = mtd_ooblayout_get_databytes(mtd, buf, this->oob_buf,
+ column, thislen);
+ if (ret)
+ return ret;
+
return 0;
}
@@ -1808,34 +1822,7 @@ static int onenand_panic_write(struct mtd_info *mtd, loff_t to, size_t len,
static int onenand_fill_auto_oob(struct mtd_info *mtd, u_char *oob_buf,
const u_char *buf, int column, int thislen)
{
- struct onenand_chip *this = mtd->priv;
- struct nand_oobfree *free;
- int writecol = column;
- int writeend = column + thislen;
- int lastgap = 0;
- unsigned int i;
-
- free = this->ecclayout->oobfree;
- for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) {
- if (writecol >= lastgap)
- writecol += free->offset - lastgap;
- if (writeend >= lastgap)
- writeend += free->offset - lastgap;
- lastgap = free->offset + free->length;
- }
- free = this->ecclayout->oobfree;
- for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) {
- int free_end = free->offset + free->length;
- if (free->offset < writeend && free_end > writecol) {
- int st = max_t(int,free->offset,writecol);
- int ed = min_t(int,free_end,writeend);
- int n = ed - st;
- memcpy(oob_buf + st, buf, n);
- buf += n;
- } else if (column == 0)
- break;
- }
- return 0;
+ return mtd_ooblayout_set_databytes(mtd, buf, oob_buf, column, thislen);
}
/**
@@ -4003,22 +3990,22 @@ int onenand_scan(struct mtd_info *mtd, int maxchips)
switch (mtd->oobsize) {
case 128:
if (FLEXONENAND(this)) {
- this->ecclayout = &flexonenand_oob_128;
+ mtd_set_ooblayout(mtd, &flexonenand_ooblayout_ops);
mtd->subpage_sft = 0;
} else {
- this->ecclayout = &onenand_oob_128;
+ mtd_set_ooblayout(mtd, &onenand_oob_128_ooblayout_ops);
mtd->subpage_sft = 2;
}
if (ONENAND_IS_NOP_1(this))
mtd->subpage_sft = 0;
break;
case 64:
- this->ecclayout = &onenand_oob_64;
+ mtd_set_ooblayout(mtd, &onenand_oob_32_64_ooblayout_ops);
mtd->subpage_sft = 2;
break;
case 32:
- this->ecclayout = &onenand_oob_32;
+ mtd_set_ooblayout(mtd, &onenand_oob_32_64_ooblayout_ops);
mtd->subpage_sft = 1;
break;
@@ -4027,7 +4014,7 @@ int onenand_scan(struct mtd_info *mtd, int maxchips)
__func__, mtd->oobsize);
mtd->subpage_sft = 0;
/* To prevent kernel oops */
- this->ecclayout = &onenand_oob_32;
+ mtd_set_ooblayout(mtd, &onenand_oob_32_64_ooblayout_ops);
break;
}
@@ -4037,12 +4024,12 @@ int onenand_scan(struct mtd_info *mtd, int maxchips)
* The number of bytes available for a client to place data into
* the out of band area
*/
- mtd->oobavail = 0;
- for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES &&
- this->ecclayout->oobfree[i].length; i++)
- mtd->oobavail += this->ecclayout->oobfree[i].length;
+ ret = mtd_ooblayout_count_freebytes(mtd);
+ if (ret < 0)
+ ret = 0;
+
+ mtd->oobavail = ret;
- mtd->ecclayout = this->ecclayout;
mtd->ecc_strength = 1;
/* Fill in remaining MTD driver data */
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index 157841dc3e99..c52e45594bfd 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -832,6 +832,7 @@ static const struct flash_info spi_nor_ids[] = {
/* GigaDevice */
{ "gd25q32", INFO(0xc84016, 0, 64 * 1024, 64, SECT_4K) },
{ "gd25q64", INFO(0xc84017, 0, 64 * 1024, 128, SECT_4K) },
+ { "gd25lq64c", INFO(0xc86017, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{ "gd25q128", INFO(0xc84018, 0, 64 * 1024, 256, SECT_4K) },
/* Intel/Numonyx -- xxxs33b */
diff --git a/drivers/of/Makefile b/drivers/of/Makefile
index bee3fa96b981..d7efd9d458aa 100644
--- a/drivers/of/Makefile
+++ b/drivers/of/Makefile
@@ -10,7 +10,6 @@ obj-$(CONFIG_OF_UNITTEST) += unittest.o
obj-$(CONFIG_OF_MDIO) += of_mdio.o
obj-$(CONFIG_OF_PCI) += of_pci.o
obj-$(CONFIG_OF_PCI_IRQ) += of_pci_irq.o
-obj-$(CONFIG_OF_MTD) += of_mtd.o
obj-$(CONFIG_OF_RESERVED_MEM) += of_reserved_mem.o
obj-$(CONFIG_OF_RESOLVE) += resolver.o
obj-$(CONFIG_OF_OVERLAY) += overlay.o
diff --git a/drivers/of/of_mtd.c b/drivers/of/of_mtd.c
deleted file mode 100644
index b7361ed70537..000000000000
--- a/drivers/of/of_mtd.c
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * Copyright 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * OF helpers for mtd.
- *
- * This file is released under the GPLv2
- *
- */
-#include <linux/kernel.h>
-#include <linux/of_mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/export.h>
-
-/**
- * It maps 'enum nand_ecc_modes_t' found in include/linux/mtd/nand.h
- * into the device tree binding of 'nand-ecc', so that MTD
- * device driver can get nand ecc from device tree.
- */
-static const char *nand_ecc_modes[] = {
- [NAND_ECC_NONE] = "none",
- [NAND_ECC_SOFT] = "soft",
- [NAND_ECC_HW] = "hw",
- [NAND_ECC_HW_SYNDROME] = "hw_syndrome",
- [NAND_ECC_HW_OOB_FIRST] = "hw_oob_first",
- [NAND_ECC_SOFT_BCH] = "soft_bch",
-};
-
-/**
- * of_get_nand_ecc_mode - Get nand ecc mode for given device_node
- * @np: Pointer to the given device_node
- *
- * The function gets ecc mode string from property 'nand-ecc-mode',
- * and return its index in nand_ecc_modes table, or errno in error case.
- */
-int of_get_nand_ecc_mode(struct device_node *np)
-{
- const char *pm;
- int err, i;
-
- err = of_property_read_string(np, "nand-ecc-mode", &pm);
- if (err < 0)
- return err;
-
- for (i = 0; i < ARRAY_SIZE(nand_ecc_modes); i++)
- if (!strcasecmp(pm, nand_ecc_modes[i]))
- return i;
-
- return -ENODEV;
-}
-EXPORT_SYMBOL_GPL(of_get_nand_ecc_mode);
-
-/**
- * of_get_nand_ecc_step_size - Get ECC step size associated to
- * the required ECC strength (see below).
- * @np: Pointer to the given device_node
- *
- * return the ECC step size, or errno in error case.
- */
-int of_get_nand_ecc_step_size(struct device_node *np)
-{
- int ret;
- u32 val;
-
- ret = of_property_read_u32(np, "nand-ecc-step-size", &val);
- return ret ? ret : val;
-}
-EXPORT_SYMBOL_GPL(of_get_nand_ecc_step_size);
-
-/**
- * of_get_nand_ecc_strength - Get required ECC strength over the
- * correspnding step size as defined by 'nand-ecc-size'
- * @np: Pointer to the given device_node
- *
- * return the ECC strength, or errno in error case.
- */
-int of_get_nand_ecc_strength(struct device_node *np)
-{
- int ret;
- u32 val;
-
- ret = of_property_read_u32(np, "nand-ecc-strength", &val);
- return ret ? ret : val;
-}
-EXPORT_SYMBOL_GPL(of_get_nand_ecc_strength);
-
-/**
- * of_get_nand_bus_width - Get nand bus witdh for given device_node
- * @np: Pointer to the given device_node
- *
- * return bus width option, or errno in error case.
- */
-int of_get_nand_bus_width(struct device_node *np)
-{
- u32 val;
-
- if (of_property_read_u32(np, "nand-bus-width", &val))
- return 8;
-
- switch(val) {
- case 8:
- case 16:
- return val;
- default:
- return -EIO;
- }
-}
-EXPORT_SYMBOL_GPL(of_get_nand_bus_width);
-
-/**
- * of_get_nand_on_flash_bbt - Get nand on flash bbt for given device_node
- * @np: Pointer to the given device_node
- *
- * return true if present false other wise
- */
-bool of_get_nand_on_flash_bbt(struct device_node *np)
-{
- return of_property_read_bool(np, "nand-on-flash-bbt");
-}
-EXPORT_SYMBOL_GPL(of_get_nand_on_flash_bbt);
diff --git a/drivers/staging/mt29f_spinand/mt29f_spinand.c b/drivers/staging/mt29f_spinand/mt29f_spinand.c
index 163f21a1298d..e389009fca42 100644
--- a/drivers/staging/mt29f_spinand/mt29f_spinand.c
+++ b/drivers/staging/mt29f_spinand/mt29f_spinand.c
@@ -42,23 +42,33 @@ static inline struct spinand_state *mtd_to_state(struct mtd_info *mtd)
static int enable_hw_ecc;
static int enable_read_hw_ecc;
-static struct nand_ecclayout spinand_oob_64 = {
- .eccbytes = 24,
- .eccpos = {
- 1, 2, 3, 4, 5, 6,
- 17, 18, 19, 20, 21, 22,
- 33, 34, 35, 36, 37, 38,
- 49, 50, 51, 52, 53, 54, },
- .oobfree = {
- {.offset = 8,
- .length = 8},
- {.offset = 24,
- .length = 8},
- {.offset = 40,
- .length = 8},
- {.offset = 56,
- .length = 8},
- }
+static int spinand_ooblayout_64_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section > 3)
+ return -ERANGE;
+
+ oobregion->offset = (section * 16) + 1;
+ oobregion->length = 6;
+
+ return 0;
+}
+
+static int spinand_ooblayout_64_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section > 3)
+ return -ERANGE;
+
+ oobregion->offset = (section * 16) + 8;
+ oobregion->length = 8;
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops spinand_oob_64_ops = {
+ .ecc = spinand_ooblayout_64_ecc,
+ .free = spinand_ooblayout_64_free,
};
#endif
@@ -886,11 +896,11 @@ static int spinand_probe(struct spi_device *spi_nand)
chip->ecc.strength = 1;
chip->ecc.total = chip->ecc.steps * chip->ecc.bytes;
- chip->ecc.layout = &spinand_oob_64;
chip->ecc.read_page = spinand_read_page_hwecc;
chip->ecc.write_page = spinand_write_page_hwecc;
#else
chip->ecc.mode = NAND_ECC_SOFT;
+ chip->ecc.algo = NAND_ECC_HAMMING;
if (spinand_disable_ecc(spi_nand) < 0)
dev_info(&spi_nand->dev, "%s: disable ecc failed!\n",
__func__);
@@ -912,6 +922,9 @@ static int spinand_probe(struct spi_device *spi_nand)
mtd->dev.parent = &spi_nand->dev;
mtd->oobsize = 64;
+#ifdef CONFIG_MTD_SPINAND_ONDIEECC
+ mtd_set_ooblayout(mtd, &spinand_oob_64_ops);
+#endif
if (nand_scan(mtd, 1))
return -ENXIO;
diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h
index 846513c73606..a5ac2cad5cb7 100644
--- a/include/linux/bcma/bcma_driver_chipcommon.h
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
@@ -587,7 +587,6 @@ struct mtd_info;
struct bcma_sflash {
bool present;
- u32 window;
u32 blocksize;
u16 numblocks;
u32 size;
diff --git a/include/linux/fsl_ifc.h b/include/linux/fsl_ifc.h
index 0023088b253b..3f9778cbc79d 100644
--- a/include/linux/fsl_ifc.h
+++ b/include/linux/fsl_ifc.h
@@ -39,6 +39,10 @@
#define FSL_IFC_VERSION_MASK 0x0F0F0000
#define FSL_IFC_VERSION_1_0_0 0x01000000
#define FSL_IFC_VERSION_1_1_0 0x01010000
+#define FSL_IFC_VERSION_2_0_0 0x02000000
+
+#define PGOFFSET_64K (64*1024)
+#define PGOFFSET_4K (4*1024)
/*
* CSPR - Chip Select Property Register
@@ -723,20 +727,26 @@ struct fsl_ifc_nand {
__be32 nand_evter_en;
u32 res17[0x2];
__be32 nand_evter_intr_en;
- u32 res18[0x2];
+ __be32 nand_vol_addr_stat;
+ u32 res18;
__be32 nand_erattr0;
__be32 nand_erattr1;
u32 res19[0x10];
__be32 nand_fsr;
- u32 res20;
- __be32 nand_eccstat[4];
- u32 res21[0x20];
+ u32 res20[0x3];
+ __be32 nand_eccstat[6];
+ u32 res21[0x1c];
__be32 nanndcr;
u32 res22[0x2];
__be32 nand_autoboot_trgr;
u32 res23;
__be32 nand_mdr;
- u32 res24[0x5C];
+ u32 res24[0x1C];
+ __be32 nand_dll_lowcfg0;
+ __be32 nand_dll_lowcfg1;
+ u32 res25;
+ __be32 nand_dll_lowstat;
+ u32 res26[0x3c];
};
/*
@@ -771,13 +781,12 @@ struct fsl_ifc_gpcm {
__be32 gpcm_erattr1;
__be32 gpcm_erattr2;
__be32 gpcm_stat;
- u32 res4[0x1F3];
};
/*
* IFC Controller Registers
*/
-struct fsl_ifc_regs {
+struct fsl_ifc_global {
__be32 ifc_rev;
u32 res1[0x2];
struct {
@@ -803,21 +812,26 @@ struct fsl_ifc_regs {
} ftim_cs[FSL_IFC_BANK_COUNT];
u32 res9[0x30];
__be32 rb_stat;
- u32 res10[0x2];
+ __be32 rb_map;
+ __be32 wb_map;
__be32 ifc_gcr;
- u32 res11[0x2];
+ u32 res10[0x2];
__be32 cm_evter_stat;
- u32 res12[0x2];
+ u32 res11[0x2];
__be32 cm_evter_en;
- u32 res13[0x2];
+ u32 res12[0x2];
__be32 cm_evter_intr_en;
- u32 res14[0x2];
+ u32 res13[0x2];
__be32 cm_erattr0;
__be32 cm_erattr1;
- u32 res15[0x2];
+ u32 res14[0x2];
__be32 ifc_ccr;
__be32 ifc_csr;
- u32 res16[0x2EB];
+ __be32 ddr_ccr_low;
+};
+
+
+struct fsl_ifc_runtime {
struct fsl_ifc_nand ifc_nand;
struct fsl_ifc_nor ifc_nor;
struct fsl_ifc_gpcm ifc_gpcm;
@@ -831,7 +845,8 @@ extern int fsl_ifc_find(phys_addr_t addr_base);
struct fsl_ifc_ctrl {
/* device info */
struct device *dev;
- struct fsl_ifc_regs __iomem *regs;
+ struct fsl_ifc_global __iomem *gregs;
+ struct fsl_ifc_runtime __iomem *rregs;
int irq;
int nand_irq;
spinlock_t lock;
diff --git a/include/linux/mtd/fsmc.h b/include/linux/mtd/fsmc.h
index c8be32e9fc49..ad3c3488073c 100644
--- a/include/linux/mtd/fsmc.h
+++ b/include/linux/mtd/fsmc.h
@@ -103,24 +103,6 @@
#define FSMC_BUSY_WAIT_TIMEOUT (1 * HZ)
-/*
- * There are 13 bytes of ecc for every 512 byte block in FSMC version 8
- * and it has to be read consecutively and immediately after the 512
- * byte data block for hardware to generate the error bit offsets
- * Managing the ecc bytes in the following way is easier. This way is
- * similar to oobfree structure maintained already in u-boot nand driver
- */
-#define MAX_ECCPLACE_ENTRIES 32
-
-struct fsmc_nand_eccplace {
- uint8_t offset;
- uint8_t length;
-};
-
-struct fsmc_eccplace {
- struct fsmc_nand_eccplace eccplace[MAX_ECCPLACE_ENTRIES];
-};
-
struct fsmc_nand_timings {
uint8_t tclr;
uint8_t tar;
diff --git a/include/linux/mtd/map.h b/include/linux/mtd/map.h
index 5e0eb7ccabd4..3aa56e3104bb 100644
--- a/include/linux/mtd/map.h
+++ b/include/linux/mtd/map.h
@@ -122,18 +122,13 @@
#endif
#ifdef CONFIG_MTD_MAP_BANK_WIDTH_32
-# ifdef map_bankwidth
-# undef map_bankwidth
-# define map_bankwidth(map) ((map)->bankwidth)
-# undef map_bankwidth_is_large
-# define map_bankwidth_is_large(map) (map_bankwidth(map) > BITS_PER_LONG/8)
-# undef map_words
-# define map_words(map) map_calc_words(map)
-# else
-# define map_bankwidth(map) 32
-# define map_bankwidth_is_large(map) (1)
-# define map_words(map) map_calc_words(map)
-# endif
+/* always use indirect access for 256-bit to preserve kernel stack */
+# undef map_bankwidth
+# define map_bankwidth(map) ((map)->bankwidth)
+# undef map_bankwidth_is_large
+# define map_bankwidth_is_large(map) (map_bankwidth(map) > BITS_PER_LONG/8)
+# undef map_words
+# define map_words(map) map_calc_words(map)
#define map_bankwidth_is_32(map) (map_bankwidth(map) == 32)
#undef MAX_MAP_BANKWIDTH
#define MAX_MAP_BANKWIDTH 32
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index ef9fea4fc400..29a170612203 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -96,16 +96,35 @@ struct mtd_oob_ops {
#define MTD_MAX_OOBFREE_ENTRIES_LARGE 32
#define MTD_MAX_ECCPOS_ENTRIES_LARGE 640
+/**
+ * struct mtd_oob_region - oob region definition
+ * @offset: region offset
+ * @length: region length
+ *
+ * This structure describes a region of the OOB area, and is used
+ * to retrieve ECC or free bytes sections.
+ * Each section is defined by an offset within the OOB area and a
+ * length.
+ */
+struct mtd_oob_region {
+ u32 offset;
+ u32 length;
+};
+
/*
- * Internal ECC layout control structure. For historical reasons, there is a
- * similar, smaller struct nand_ecclayout_user (in mtd-abi.h) that is retained
- * for export to user-space via the ECCGETLAYOUT ioctl.
- * nand_ecclayout should be expandable in the future simply by the above macros.
+ * struct mtd_ooblayout_ops - NAND OOB layout operations
+ * @ecc: function returning an ECC region in the OOB area.
+ * Should return -ERANGE if %section exceeds the total number of
+ * ECC sections.
+ * @free: function returning a free region in the OOB area.
+ * Should return -ERANGE if %section exceeds the total number of
+ * free sections.
*/
-struct nand_ecclayout {
- __u32 eccbytes;
- __u32 eccpos[MTD_MAX_ECCPOS_ENTRIES_LARGE];
- struct nand_oobfree oobfree[MTD_MAX_OOBFREE_ENTRIES_LARGE];
+struct mtd_ooblayout_ops {
+ int (*ecc)(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobecc);
+ int (*free)(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobfree);
};
struct module; /* only needed for owner field in mtd_info */
@@ -166,8 +185,8 @@ struct mtd_info {
const char *name;
int index;
- /* ECC layout structure pointer - read only! */
- struct nand_ecclayout *ecclayout;
+ /* OOB layout description */
+ const struct mtd_ooblayout_ops *ooblayout;
/* the ecc step size. */
unsigned int ecc_step_size;
@@ -253,6 +272,30 @@ struct mtd_info {
int usecount;
};
+int mtd_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobecc);
+int mtd_ooblayout_find_eccregion(struct mtd_info *mtd, int eccbyte,
+ int *section,
+ struct mtd_oob_region *oobregion);
+int mtd_ooblayout_get_eccbytes(struct mtd_info *mtd, u8 *eccbuf,
+ const u8 *oobbuf, int start, int nbytes);
+int mtd_ooblayout_set_eccbytes(struct mtd_info *mtd, const u8 *eccbuf,
+ u8 *oobbuf, int start, int nbytes);
+int mtd_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobfree);
+int mtd_ooblayout_get_databytes(struct mtd_info *mtd, u8 *databuf,
+ const u8 *oobbuf, int start, int nbytes);
+int mtd_ooblayout_set_databytes(struct mtd_info *mtd, const u8 *databuf,
+ u8 *oobbuf, int start, int nbytes);
+int mtd_ooblayout_count_freebytes(struct mtd_info *mtd);
+int mtd_ooblayout_count_eccbytes(struct mtd_info *mtd);
+
+static inline void mtd_set_ooblayout(struct mtd_info *mtd,
+ const struct mtd_ooblayout_ops *ooblayout)
+{
+ mtd->ooblayout = ooblayout;
+}
+
static inline void mtd_set_of_node(struct mtd_info *mtd,
struct device_node *np)
{
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 56574ba36555..fbe8e164a4ee 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -116,9 +116,14 @@ typedef enum {
NAND_ECC_HW,
NAND_ECC_HW_SYNDROME,
NAND_ECC_HW_OOB_FIRST,
- NAND_ECC_SOFT_BCH,
} nand_ecc_modes_t;
+enum nand_ecc_algo {
+ NAND_ECC_UNKNOWN,
+ NAND_ECC_HAMMING,
+ NAND_ECC_BCH,
+};
+
/*
* Constants for Hardware ECC
*/
@@ -458,6 +463,7 @@ struct nand_hw_control {
/**
* struct nand_ecc_ctrl - Control structure for ECC
* @mode: ECC mode
+ * @algo: ECC algorithm
* @steps: number of ECC steps per page
* @size: data bytes per ECC step
* @bytes: ECC bytes per step
@@ -466,7 +472,6 @@ struct nand_hw_control {
* @prepad: padding information for syndrome based ECC generators
* @postpad: padding information for syndrome based ECC generators
* @options: ECC specific options (see NAND_ECC_XXX flags defined above)
- * @layout: ECC layout control struct pointer
* @priv: pointer to private ECC control data
* @hwctl: function to control hardware ECC generator. Must only
* be provided if an hardware ECC is available
@@ -508,6 +513,7 @@ struct nand_hw_control {
*/
struct nand_ecc_ctrl {
nand_ecc_modes_t mode;
+ enum nand_ecc_algo algo;
int steps;
int size;
int bytes;
@@ -516,7 +522,6 @@ struct nand_ecc_ctrl {
int prepad;
int postpad;
unsigned int options;
- struct nand_ecclayout *layout;
void *priv;
void (*hwctl)(struct mtd_info *mtd, int mode);
int (*calculate)(struct mtd_info *mtd, const uint8_t *dat,
@@ -740,6 +745,9 @@ struct nand_chip {
void *priv;
};
+extern const struct mtd_ooblayout_ops nand_ooblayout_sp_ops;
+extern const struct mtd_ooblayout_ops nand_ooblayout_lp_ops;
+
static inline void nand_set_flash_node(struct nand_chip *chip,
struct device_node *np)
{
@@ -1070,4 +1078,18 @@ int nand_check_erased_ecc_chunk(void *data, int datalen,
void *ecc, int ecclen,
void *extraoob, int extraooblen,
int threshold);
+
+/* Default write_oob implementation */
+int nand_write_oob_std(struct mtd_info *mtd, struct nand_chip *chip, int page);
+
+/* Default write_oob syndrome implementation */
+int nand_write_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
+ int page);
+
+/* Default read_oob implementation */
+int nand_read_oob_std(struct mtd_info *mtd, struct nand_chip *chip, int page);
+
+/* Default read_oob syndrome implementation */
+int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
+ int page);
#endif /* __LINUX_MTD_NAND_H */
diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h
index 4596503c9da9..0aaa98b219a4 100644
--- a/include/linux/mtd/onenand.h
+++ b/include/linux/mtd/onenand.h
@@ -80,7 +80,6 @@ struct onenand_bufferram {
* @page_buf: [INTERN] page main data buffer
* @oob_buf: [INTERN] page oob data buffer
* @subpagesize: [INTERN] holds the subpagesize
- * @ecclayout: [REPLACEABLE] the default ecc placement scheme
* @bbm: [REPLACEABLE] pointer to Bad Block Management
* @priv: [OPTIONAL] pointer to private chip date
*/
@@ -134,7 +133,6 @@ struct onenand_chip {
#endif
int subpagesize;
- struct nand_ecclayout *ecclayout;
void *bbm;
diff --git a/include/linux/mtd/sharpsl.h b/include/linux/mtd/sharpsl.h
index 25f4d2a845c1..65e91d0fa981 100644
--- a/include/linux/mtd/sharpsl.h
+++ b/include/linux/mtd/sharpsl.h
@@ -14,7 +14,7 @@
struct sharpsl_nand_platform_data {
struct nand_bbt_descr *badblock_pattern;
- struct nand_ecclayout *ecc_layout;
+ const struct mtd_ooblayout_ops *ecc_layout;
struct mtd_partition *partitions;
unsigned int nr_partitions;
};
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index 3c36113a88e1..7f041bd88b82 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -21,6 +21,7 @@
* Sometimes these are the same as CFI IDs, but sometimes they aren't.
*/
#define SNOR_MFR_ATMEL CFI_MFR_ATMEL
+#define SNOR_MFR_GIGADEVICE 0xc8
#define SNOR_MFR_INTEL CFI_MFR_INTEL
#define SNOR_MFR_MICRON CFI_MFR_ST /* ST Micro <--> Micron */
#define SNOR_MFR_MACRONIX CFI_MFR_MACRONIX
diff --git a/include/linux/of_mtd.h b/include/linux/of_mtd.h
deleted file mode 100644
index e266caa36402..000000000000
--- a/include/linux/of_mtd.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * Copyright 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * OF helpers for mtd.
- *
- * This file is released under the GPLv2
- */
-
-#ifndef __LINUX_OF_MTD_H
-#define __LINUX_OF_MTD_H
-
-#ifdef CONFIG_OF_MTD
-
-#include <linux/of.h>
-int of_get_nand_ecc_mode(struct device_node *np);
-int of_get_nand_ecc_step_size(struct device_node *np);
-int of_get_nand_ecc_strength(struct device_node *np);
-int of_get_nand_bus_width(struct device_node *np);
-bool of_get_nand_on_flash_bbt(struct device_node *np);
-
-#else /* CONFIG_OF_MTD */
-
-static inline int of_get_nand_ecc_mode(struct device_node *np)
-{
- return -ENOSYS;
-}
-
-static inline int of_get_nand_ecc_step_size(struct device_node *np)
-{
- return -ENOSYS;
-}
-
-static inline int of_get_nand_ecc_strength(struct device_node *np)
-{
- return -ENOSYS;
-}
-
-static inline int of_get_nand_bus_width(struct device_node *np)
-{
- return -ENOSYS;
-}
-
-static inline bool of_get_nand_on_flash_bbt(struct device_node *np)
-{
- return false;
-}
-
-#endif /* CONFIG_OF_MTD */
-
-#endif /* __LINUX_OF_MTD_H */
diff --git a/include/linux/omap-gpmc.h b/include/linux/omap-gpmc.h
index d833eb4dd446..9e9d79e8efa5 100644
--- a/include/linux/omap-gpmc.h
+++ b/include/linux/omap-gpmc.h
@@ -7,161 +7,53 @@
* option) any later version.
*/
-/* Maximum Number of Chip Selects */
-#define GPMC_CS_NUM 8
+#include <linux/platform_data/gpmc-omap.h>
#define GPMC_CONFIG_WP 0x00000005
-#define GPMC_IRQ_FIFOEVENTENABLE 0x01
-#define GPMC_IRQ_COUNT_EVENT 0x02
-
-#define GPMC_BURST_4 4 /* 4 word burst */
-#define GPMC_BURST_8 8 /* 8 word burst */
-#define GPMC_BURST_16 16 /* 16 word burst */
-#define GPMC_DEVWIDTH_8BIT 1 /* 8-bit device width */
-#define GPMC_DEVWIDTH_16BIT 2 /* 16-bit device width */
-#define GPMC_MUX_AAD 1 /* Addr-Addr-Data multiplex */
-#define GPMC_MUX_AD 2 /* Addr-Data multiplex */
-
-/* bool type time settings */
-struct gpmc_bool_timings {
- bool cycle2cyclediffcsen;
- bool cycle2cyclesamecsen;
- bool we_extra_delay;
- bool oe_extra_delay;
- bool adv_extra_delay;
- bool cs_extra_delay;
- bool time_para_granularity;
-};
+/* IRQ numbers in GPMC IRQ domain for legacy boot use */
+#define GPMC_IRQ_FIFOEVENTENABLE 0
+#define GPMC_IRQ_COUNT_EVENT 1
-/*
- * Note that all values in this struct are in nanoseconds except sync_clk
- * (which is in picoseconds), while the register values are in gpmc_fck cycles.
+/**
+ * gpmc_nand_ops - Interface between NAND and GPMC
+ * @nand_write_buffer_empty: get the NAND write buffer empty status.
*/
-struct gpmc_timings {
- /* Minimum clock period for synchronous mode (in picoseconds) */
- u32 sync_clk;
-
- /* Chip-select signal timings corresponding to GPMC_CS_CONFIG2 */
- u32 cs_on; /* Assertion time */
- u32 cs_rd_off; /* Read deassertion time */
- u32 cs_wr_off; /* Write deassertion time */
-
- /* ADV signal timings corresponding to GPMC_CONFIG3 */
- u32 adv_on; /* Assertion time */
- u32 adv_rd_off; /* Read deassertion time */
- u32 adv_wr_off; /* Write deassertion time */
- u32 adv_aad_mux_on; /* ADV assertion time for AAD */
- u32 adv_aad_mux_rd_off; /* ADV read deassertion time for AAD */
- u32 adv_aad_mux_wr_off; /* ADV write deassertion time for AAD */
-
- /* WE signals timings corresponding to GPMC_CONFIG4 */
- u32 we_on; /* WE assertion time */
- u32 we_off; /* WE deassertion time */
-
- /* OE signals timings corresponding to GPMC_CONFIG4 */
- u32 oe_on; /* OE assertion time */
- u32 oe_off; /* OE deassertion time */
- u32 oe_aad_mux_on; /* OE assertion time for AAD */
- u32 oe_aad_mux_off; /* OE deassertion time for AAD */
-
- /* Access time and cycle time timings corresponding to GPMC_CONFIG5 */
- u32 page_burst_access; /* Multiple access word delay */
- u32 access; /* Start-cycle to first data valid delay */
- u32 rd_cycle; /* Total read cycle time */
- u32 wr_cycle; /* Total write cycle time */
-
- u32 bus_turnaround;
- u32 cycle2cycle_delay;
-
- u32 wait_monitoring;
- u32 clk_activation;
-
- /* The following are only on OMAP3430 */
- u32 wr_access; /* WRACCESSTIME */
- u32 wr_data_mux_bus; /* WRDATAONADMUXBUS */
-
- struct gpmc_bool_timings bool_timings;
+struct gpmc_nand_ops {
+ bool (*nand_writebuffer_empty)(void);
};
-/* Device timings in picoseconds */
-struct gpmc_device_timings {
- u32 t_ceasu; /* address setup to CS valid */
- u32 t_avdasu; /* address setup to ADV valid */
- /* XXX: try to combine t_avdp_r & t_avdp_w. Issue is
- * of tusb using these timings even for sync whilst
- * ideally for adv_rd/(wr)_off it should have considered
- * t_avdh instead. This indirectly necessitates r/w
- * variations of t_avdp as it is possible to have one
- * sync & other async
- */
- u32 t_avdp_r; /* ADV low time (what about t_cer ?) */
- u32 t_avdp_w;
- u32 t_aavdh; /* address hold time */
- u32 t_oeasu; /* address setup to OE valid */
- u32 t_aa; /* access time from ADV assertion */
- u32 t_iaa; /* initial access time */
- u32 t_oe; /* access time from OE assertion */
- u32 t_ce; /* access time from CS asertion */
- u32 t_rd_cycle; /* read cycle time */
- u32 t_cez_r; /* read CS deassertion to high Z */
- u32 t_cez_w; /* write CS deassertion to high Z */
- u32 t_oez; /* OE deassertion to high Z */
- u32 t_weasu; /* address setup to WE valid */
- u32 t_wpl; /* write assertion time */
- u32 t_wph; /* write deassertion time */
- u32 t_wr_cycle; /* write cycle time */
-
- u32 clk;
- u32 t_bacc; /* burst access valid clock to output delay */
- u32 t_ces; /* CS setup time to clk */
- u32 t_avds; /* ADV setup time to clk */
- u32 t_avdh; /* ADV hold time from clk */
- u32 t_ach; /* address hold time from clk */
- u32 t_rdyo; /* clk to ready valid */
-
- u32 t_ce_rdyz; /* XXX: description ?, or use t_cez instead */
- u32 t_ce_avd; /* CS on to ADV on delay */
-
- /* XXX: check the possibility of combining
- * cyc_aavhd_oe & cyc_aavdh_we
- */
- u8 cyc_aavdh_oe;/* read address hold time in cycles */
- u8 cyc_aavdh_we;/* write address hold time in cycles */
- u8 cyc_oe; /* access time from OE assertion in cycles */
- u8 cyc_wpl; /* write deassertion time in cycles */
- u32 cyc_iaa; /* initial access time in cycles */
-
- /* extra delays */
- bool ce_xdelay;
- bool avd_xdelay;
- bool oe_xdelay;
- bool we_xdelay;
-};
+struct gpmc_nand_regs;
-struct gpmc_settings {
- bool burst_wrap; /* enables wrap bursting */
- bool burst_read; /* enables read page/burst mode */
- bool burst_write; /* enables write page/burst mode */
- bool device_nand; /* device is NAND */
- bool sync_read; /* enables synchronous reads */
- bool sync_write; /* enables synchronous writes */
- bool wait_on_read; /* monitor wait on reads */
- bool wait_on_write; /* monitor wait on writes */
- u32 burst_len; /* page/burst length */
- u32 device_width; /* device bus width (8 or 16 bit) */
- u32 mux_add_data; /* multiplex address & data */
- u32 wait_pin; /* wait-pin to be used */
-};
+#if IS_ENABLED(CONFIG_OMAP_GPMC)
+struct gpmc_nand_ops *gpmc_omap_get_nand_ops(struct gpmc_nand_regs *regs,
+ int cs);
+#else
+static inline gpmc_nand_ops *gpmc_omap_get_nand_ops(struct gpmc_nand_regs *regs,
+ int cs)
+{
+ return NULL;
+}
+#endif /* CONFIG_OMAP_GPMC */
+
+/*--------------------------------*/
+
+/* deprecated APIs */
+#if IS_ENABLED(CONFIG_OMAP_GPMC)
+void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs);
+#else
+static inline void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs)
+{
+}
+#endif /* CONFIG_OMAP_GPMC */
+/*--------------------------------*/
extern int gpmc_calc_timings(struct gpmc_timings *gpmc_t,
struct gpmc_settings *gpmc_s,
struct gpmc_device_timings *dev_t);
-struct gpmc_nand_regs;
struct device_node;
-extern void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs);
extern int gpmc_get_client_irq(unsigned irq_config);
extern unsigned int gpmc_ticks_to_ns(unsigned int ticks);
diff --git a/include/linux/platform_data/gpmc-omap.h b/include/linux/platform_data/gpmc-omap.h
new file mode 100644
index 000000000000..67ccdb0e1606
--- /dev/null
+++ b/include/linux/platform_data/gpmc-omap.h
@@ -0,0 +1,172 @@
+/*
+ * OMAP GPMC Platform data
+ *
+ * Copyright (C) 2014 Texas Instruments, Inc. - http://www.ti.com
+ * Roger Quadros <rogerq@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ */
+
+#ifndef _GPMC_OMAP_H_
+#define _GPMC_OMAP_H_
+
+/* Maximum Number of Chip Selects */
+#define GPMC_CS_NUM 8
+
+/* bool type time settings */
+struct gpmc_bool_timings {
+ bool cycle2cyclediffcsen;
+ bool cycle2cyclesamecsen;
+ bool we_extra_delay;
+ bool oe_extra_delay;
+ bool adv_extra_delay;
+ bool cs_extra_delay;
+ bool time_para_granularity;
+};
+
+/*
+ * Note that all values in this struct are in nanoseconds except sync_clk
+ * (which is in picoseconds), while the register values are in gpmc_fck cycles.
+ */
+struct gpmc_timings {
+ /* Minimum clock period for synchronous mode (in picoseconds) */
+ u32 sync_clk;
+
+ /* Chip-select signal timings corresponding to GPMC_CS_CONFIG2 */
+ u32 cs_on; /* Assertion time */
+ u32 cs_rd_off; /* Read deassertion time */
+ u32 cs_wr_off; /* Write deassertion time */
+
+ /* ADV signal timings corresponding to GPMC_CONFIG3 */
+ u32 adv_on; /* Assertion time */
+ u32 adv_rd_off; /* Read deassertion time */
+ u32 adv_wr_off; /* Write deassertion time */
+ u32 adv_aad_mux_on; /* ADV assertion time for AAD */
+ u32 adv_aad_mux_rd_off; /* ADV read deassertion time for AAD */
+ u32 adv_aad_mux_wr_off; /* ADV write deassertion time for AAD */
+
+ /* WE signals timings corresponding to GPMC_CONFIG4 */
+ u32 we_on; /* WE assertion time */
+ u32 we_off; /* WE deassertion time */
+
+ /* OE signals timings corresponding to GPMC_CONFIG4 */
+ u32 oe_on; /* OE assertion time */
+ u32 oe_off; /* OE deassertion time */
+ u32 oe_aad_mux_on; /* OE assertion time for AAD */
+ u32 oe_aad_mux_off; /* OE deassertion time for AAD */
+
+ /* Access time and cycle time timings corresponding to GPMC_CONFIG5 */
+ u32 page_burst_access; /* Multiple access word delay */
+ u32 access; /* Start-cycle to first data valid delay */
+ u32 rd_cycle; /* Total read cycle time */
+ u32 wr_cycle; /* Total write cycle time */
+
+ u32 bus_turnaround;
+ u32 cycle2cycle_delay;
+
+ u32 wait_monitoring;
+ u32 clk_activation;
+
+ /* The following are only on OMAP3430 */
+ u32 wr_access; /* WRACCESSTIME */
+ u32 wr_data_mux_bus; /* WRDATAONADMUXBUS */
+
+ struct gpmc_bool_timings bool_timings;
+};
+
+/* Device timings in picoseconds */
+struct gpmc_device_timings {
+ u32 t_ceasu; /* address setup to CS valid */
+ u32 t_avdasu; /* address setup to ADV valid */
+ /* XXX: try to combine t_avdp_r & t_avdp_w. Issue is
+ * of tusb using these timings even for sync whilst
+ * ideally for adv_rd/(wr)_off it should have considered
+ * t_avdh instead. This indirectly necessitates r/w
+ * variations of t_avdp as it is possible to have one
+ * sync & other async
+ */
+ u32 t_avdp_r; /* ADV low time (what about t_cer ?) */
+ u32 t_avdp_w;
+ u32 t_aavdh; /* address hold time */
+ u32 t_oeasu; /* address setup to OE valid */
+ u32 t_aa; /* access time from ADV assertion */
+ u32 t_iaa; /* initial access time */
+ u32 t_oe; /* access time from OE assertion */
+ u32 t_ce; /* access time from CS asertion */
+ u32 t_rd_cycle; /* read cycle time */
+ u32 t_cez_r; /* read CS deassertion to high Z */
+ u32 t_cez_w; /* write CS deassertion to high Z */
+ u32 t_oez; /* OE deassertion to high Z */
+ u32 t_weasu; /* address setup to WE valid */
+ u32 t_wpl; /* write assertion time */
+ u32 t_wph; /* write deassertion time */
+ u32 t_wr_cycle; /* write cycle time */
+
+ u32 clk;
+ u32 t_bacc; /* burst access valid clock to output delay */
+ u32 t_ces; /* CS setup time to clk */
+ u32 t_avds; /* ADV setup time to clk */
+ u32 t_avdh; /* ADV hold time from clk */
+ u32 t_ach; /* address hold time from clk */
+ u32 t_rdyo; /* clk to ready valid */
+
+ u32 t_ce_rdyz; /* XXX: description ?, or use t_cez instead */
+ u32 t_ce_avd; /* CS on to ADV on delay */
+
+ /* XXX: check the possibility of combining
+ * cyc_aavhd_oe & cyc_aavdh_we
+ */
+ u8 cyc_aavdh_oe;/* read address hold time in cycles */
+ u8 cyc_aavdh_we;/* write address hold time in cycles */
+ u8 cyc_oe; /* access time from OE assertion in cycles */
+ u8 cyc_wpl; /* write deassertion time in cycles */
+ u32 cyc_iaa; /* initial access time in cycles */
+
+ /* extra delays */
+ bool ce_xdelay;
+ bool avd_xdelay;
+ bool oe_xdelay;
+ bool we_xdelay;
+};
+
+#define GPMC_BURST_4 4 /* 4 word burst */
+#define GPMC_BURST_8 8 /* 8 word burst */
+#define GPMC_BURST_16 16 /* 16 word burst */
+#define GPMC_DEVWIDTH_8BIT 1 /* 8-bit device width */
+#define GPMC_DEVWIDTH_16BIT 2 /* 16-bit device width */
+#define GPMC_MUX_AAD 1 /* Addr-Addr-Data multiplex */
+#define GPMC_MUX_AD 2 /* Addr-Data multiplex */
+
+struct gpmc_settings {
+ bool burst_wrap; /* enables wrap bursting */
+ bool burst_read; /* enables read page/burst mode */
+ bool burst_write; /* enables write page/burst mode */
+ bool device_nand; /* device is NAND */
+ bool sync_read; /* enables synchronous reads */
+ bool sync_write; /* enables synchronous writes */
+ bool wait_on_read; /* monitor wait on reads */
+ bool wait_on_write; /* monitor wait on writes */
+ u32 burst_len; /* page/burst length */
+ u32 device_width; /* device bus width (8 or 16 bit) */
+ u32 mux_add_data; /* multiplex address & data */
+ u32 wait_pin; /* wait-pin to be used */
+};
+
+/* Data for each chip select */
+struct gpmc_omap_cs_data {
+ bool valid; /* data is valid */
+ bool is_nand; /* device within this CS is NAND */
+ struct gpmc_settings *settings;
+ struct gpmc_device_timings *device_timings;
+ struct gpmc_timings *gpmc_timings;
+ struct platform_device *pdev; /* device within this CS region */
+ unsigned int pdata_size;
+};
+
+struct gpmc_omap_platform_data {
+ struct gpmc_omap_cs_data cs[GPMC_CS_NUM];
+};
+
+#endif /* _GPMC_OMAP_H */
diff --git a/include/linux/platform_data/mtd-nand-omap2.h b/include/linux/platform_data/mtd-nand-omap2.h
index 090bbab0130a..17d57a18bac5 100644
--- a/include/linux/platform_data/mtd-nand-omap2.h
+++ b/include/linux/platform_data/mtd-nand-omap2.h
@@ -45,7 +45,6 @@ enum omap_ecc {
};
struct gpmc_nand_regs {
- void __iomem *gpmc_status;
void __iomem *gpmc_nand_command;
void __iomem *gpmc_nand_address;
void __iomem *gpmc_nand_data;
@@ -64,21 +63,24 @@ struct gpmc_nand_regs {
void __iomem *gpmc_bch_result4[GPMC_BCH_NUM_REMAINDER];
void __iomem *gpmc_bch_result5[GPMC_BCH_NUM_REMAINDER];
void __iomem *gpmc_bch_result6[GPMC_BCH_NUM_REMAINDER];
+ /* Deprecated. Do not use */
+ void __iomem *gpmc_status;
};
struct omap_nand_platform_data {
int cs;
struct mtd_partition *parts;
int nr_parts;
- bool dev_ready;
bool flash_bbt;
enum nand_io xfer_type;
int devsize;
enum omap_ecc ecc_opt;
- struct gpmc_nand_regs reg;
- /* for passing the partitions */
- struct device_node *of_node;
struct device_node *elm_of_node;
+
+ /* deprecated */
+ struct gpmc_nand_regs reg;
+ struct device_node *of_node;
+ bool dev_ready;
};
#endif
diff --git a/include/uapi/mtd/mtd-abi.h b/include/uapi/mtd/mtd-abi.h
index 763bb6950402..0ec1da2ef652 100644
--- a/include/uapi/mtd/mtd-abi.h
+++ b/include/uapi/mtd/mtd-abi.h
@@ -228,7 +228,7 @@ struct nand_oobfree {
* complete set of ECC information. The ioctl truncates the larger internal
* structure to retain binary compatibility with the static declaration of the
* ioctl. Note that the "MTD_MAX_..._ENTRIES" macros represent the max size of
- * the user struct, not the MAX size of the internal struct nand_ecclayout.
+ * the user struct, not the MAX size of the internal OOB layout representation.
*/
struct nand_ecclayout_user {
__u32 eccbytes;