summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorRabin Vincent <rabin@rab.in>2015-08-03 20:19:24 +0200
committerJesper Nilsson <jespern@axis.com>2015-11-02 20:03:05 +0100
commitab28e96fd1cf1db1579854931890e5613efc5021 (patch)
tree6884d63dc8b7199210a3e2f3ac38c6811cbcab15
parent79b863c68eba8f7aa5b76c44db3b1df8412c977e (diff)
downloadlinux-ab28e96fd1cf1db1579854931890e5613efc5021.tar.gz
CRIS v32: remove old GPIO and LEDs code
Since we now have a gpiolib driver, remove this code: The gpio-etraxfs driver (along with things like gpio-keys-polled for polling support) replaces the GIO driver implementations in mach-a3 and mach-fs. The various generic external chip drivers replace the "virtual gpio" parts. The generic gpio-leds driver replaces the LED handling. Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jespern@axis.com>
-rw-r--r--arch/cris/arch-v32/Kconfig89
-rw-r--r--arch/cris/arch-v32/drivers/Kconfig149
-rw-r--r--arch/cris/arch-v32/drivers/mach-a3/Makefile1
-rw-r--r--arch/cris/arch-v32/drivers/mach-a3/gpio.c999
-rw-r--r--arch/cris/arch-v32/drivers/mach-fs/Makefile1
-rw-r--r--arch/cris/arch-v32/drivers/mach-fs/gpio.c978
-rw-r--r--arch/cris/arch-v32/kernel/crisksyms.c3
-rw-r--r--arch/cris/arch-v32/mach-a3/Makefile2
-rw-r--r--arch/cris/arch-v32/mach-a3/io.c149
-rw-r--r--arch/cris/arch-v32/mach-fs/Makefile2
-rw-r--r--arch/cris/arch-v32/mach-fs/io.c191
-rw-r--r--arch/cris/include/arch-v32/arch/io.h140
-rw-r--r--arch/cris/include/asm/io.h2
13 files changed, 4 insertions, 2702 deletions
diff --git a/arch/cris/arch-v32/Kconfig b/arch/cris/arch-v32/Kconfig
index 21bbd93be34f..17dbe03af5f4 100644
--- a/arch/cris/arch-v32/Kconfig
+++ b/arch/cris/arch-v32/Kconfig
@@ -11,95 +11,6 @@ config ETRAX_DRAM_VIRTUAL_BASE
default "c0000000"
choice
- prompt "Nbr of Ethernet LED groups"
- depends on ETRAX_ARCH_V32
- default ETRAX_NBR_LED_GRP_ONE
- help
- Select how many Ethernet LED groups that can be used. Usually one per Ethernet
- interface is a good choice.
-
-config ETRAX_NBR_LED_GRP_ZERO
- bool "Use zero LED groups"
- help
- Select this if you do not want any Ethernet LEDs.
-
-config ETRAX_NBR_LED_GRP_ONE
- bool "Use one LED group"
- help
- Select this if you want one Ethernet LED group. This LED group
- can be used for one or more Ethernet interfaces. However, it is
- recommended that each Ethernet interface use a dedicated LED group.
-
-config ETRAX_NBR_LED_GRP_TWO
- bool "Use two LED groups"
- help
- Select this if you want two Ethernet LED groups. This is the
- best choice if you have more than one Ethernet interface and
- would like to have separate LEDs for the interfaces.
-
-endchoice
-
-config ETRAX_LED_G_NET0
- string "Ethernet LED group 0 green LED bit"
- depends on ETRAX_ARCH_V32 && (ETRAX_NBR_LED_GRP_ONE || ETRAX_NBR_LED_GRP_TWO)
- default "PA3"
- help
- Bit to use for the green LED in Ethernet LED group 0.
-
-config ETRAX_LED_R_NET0
- string "Ethernet LED group 0 red LED bit"
- depends on ETRAX_ARCH_V32 && (ETRAX_NBR_LED_GRP_ONE || ETRAX_NBR_LED_GRP_TWO)
- default "PA4"
- help
- Bit to use for the red LED in Ethernet LED group 0.
-
-config ETRAX_LED_G_NET1
- string "Ethernet group 1 green LED bit"
- depends on ETRAX_ARCH_V32 && ETRAX_NBR_LED_GRP_TWO
- default ""
- help
- Bit to use for the green LED in Ethernet LED group 1.
-
-config ETRAX_LED_R_NET1
- string "Ethernet group 1 red LED bit"
- depends on ETRAX_ARCH_V32 && ETRAX_NBR_LED_GRP_TWO
- default ""
- help
- Bit to use for the red LED in Ethernet LED group 1.
-
-config ETRAX_V32_LED2G
- string "Second green LED bit"
- depends on ETRAX_ARCH_V32
- default "PA5"
- help
- Bit to use for the first green LED (status LED).
- Most Axis products use bit A5 here.
-
-config ETRAX_V32_LED2R
- string "Second red LED bit"
- depends on ETRAX_ARCH_V32
- default "PA6"
- help
- Bit to use for the first red LED (network LED).
- Most Axis products use bit A6 here.
-
-config ETRAX_V32_LED3G
- string "Third green LED bit"
- depends on ETRAX_ARCH_V32
- default "PA7"
- help
- Bit to use for the first green LED (drive/power LED).
- Most Axis products use bit A7 here.
-
-config ETRAX_V32_LED3R
- string "Third red LED bit"
- depends on ETRAX_ARCH_V32
- default "PA7"
- help
- Bit to use for the first red LED (drive/power LED).
- Most Axis products use bit A7 here.
-
-choice
prompt "Kernel GDB port"
depends on ETRAX_KGDB
default ETRAX_KGDB_PORT0
diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig
index c5cbd2aac60e..2735eb7671a5 100644
--- a/arch/cris/arch-v32/drivers/Kconfig
+++ b/arch/cris/arch-v32/drivers/Kconfig
@@ -149,155 +149,6 @@ config ETRAX_NANDBOOT
Say Y if your boot code, kernel and root file system is in
NAND flash. Say N if they are in NOR flash.
-config ETRAX_GPIO
- bool "GPIO support"
- depends on ETRAX_ARCH_V32
- ---help---
- Enables the ETRAX general port device (major 120, minors 0-4).
- You can use this driver to access the general port bits. It supports
- these ioctl's:
- #include <linux/etraxgpio.h>
- fd = open("/dev/gpioa", O_RDWR); // or /dev/gpiob
- ioctl(fd, _IO(ETRAXGPIO_IOCTYPE, IO_SETBITS), bits_to_set);
- ioctl(fd, _IO(ETRAXGPIO_IOCTYPE, IO_CLRBITS), bits_to_clear);
- err = ioctl(fd, _IO(ETRAXGPIO_IOCTYPE, IO_READ_INBITS), &val);
- Remember that you need to setup the port directions appropriately in
- the General configuration.
-
-config ETRAX_VIRTUAL_GPIO
- bool "Virtual GPIO support"
- depends on ETRAX_GPIO
- help
- Enables the virtual Etrax general port device (major 120, minor 6).
- It uses an I/O expander for the I2C-bus.
-
-config ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN
- int "Virtual GPIO interrupt pin on PA pin"
- range 0 7
- depends on ETRAX_VIRTUAL_GPIO
- help
- The pin to use on PA for virtual gpio interrupt.
-
-config ETRAX_PA_CHANGEABLE_DIR
- hex "PA user changeable dir mask"
- depends on ETRAX_GPIO
- default "0x00" if ETRAXFS
- default "0x00000000" if !ETRAXFS
- help
- This is a bitmask with information of what bits in PA that a
- user can change direction on using ioctl's.
- Bit set = changeable.
- You probably want 0 here, but it depends on your hardware.
-
-config ETRAX_PA_CHANGEABLE_BITS
- hex "PA user changeable bits mask"
- depends on ETRAX_GPIO
- default "0x00" if ETRAXFS
- default "0x00000000" if !ETRAXFS
- help
- This is a bitmask with information of what bits in PA
- that a user can change the value on using ioctl's.
- Bit set = changeable.
-
-config ETRAX_PB_CHANGEABLE_DIR
- hex "PB user changeable dir mask"
- depends on ETRAX_GPIO
- default "0x00000" if ETRAXFS
- default "0x00000000" if !ETRAXFS
- help
- This is a bitmask with information of what bits in PB
- that a user can change direction on using ioctl's.
- Bit set = changeable.
- You probably want 0 here, but it depends on your hardware.
-
-config ETRAX_PB_CHANGEABLE_BITS
- hex "PB user changeable bits mask"
- depends on ETRAX_GPIO
- default "0x00000" if ETRAXFS
- default "0x00000000" if !ETRAXFS
- help
- This is a bitmask with information of what bits in PB
- that a user can change the value on using ioctl's.
- Bit set = changeable.
-
-config ETRAX_PC_CHANGEABLE_DIR
- hex "PC user changeable dir mask"
- depends on ETRAX_GPIO
- default "0x00000" if ETRAXFS
- default "0x00000000" if !ETRAXFS
- help
- This is a bitmask with information of what bits in PC
- that a user can change direction on using ioctl's.
- Bit set = changeable.
- You probably want 0 here, but it depends on your hardware.
-
-config ETRAX_PC_CHANGEABLE_BITS
- hex "PC user changeable bits mask"
- depends on ETRAX_GPIO
- default "0x00000" if ETRAXFS
- default "0x00000000" if !ETRAXFS
- help
- This is a bitmask with information of what bits in PC
- that a user can change the value on using ioctl's.
- Bit set = changeable.
-
-config ETRAX_PD_CHANGEABLE_DIR
- hex "PD user changeable dir mask"
- depends on ETRAX_GPIO && ETRAXFS
- default "0x00000"
- help
- This is a bitmask with information of what bits in PD
- that a user can change direction on using ioctl's.
- Bit set = changeable.
- You probably want 0x00000 here, but it depends on your hardware.
-
-config ETRAX_PD_CHANGEABLE_BITS
- hex "PD user changeable bits mask"
- depends on ETRAX_GPIO && ETRAXFS
- default "0x00000"
- help
- This is a bitmask (18 bits) with information of what bits in PD
- that a user can change the value on using ioctl's.
- Bit set = changeable.
-
-config ETRAX_PE_CHANGEABLE_DIR
- hex "PE user changeable dir mask"
- depends on ETRAX_GPIO && ETRAXFS
- default "0x00000"
- help
- This is a bitmask (18 bits) with information of what bits in PE
- that a user can change direction on using ioctl's.
- Bit set = changeable.
- You probably want 0x00000 here, but it depends on your hardware.
-
-config ETRAX_PE_CHANGEABLE_BITS
- hex "PE user changeable bits mask"
- depends on ETRAX_GPIO && ETRAXFS
- default "0x00000"
- help
- This is a bitmask (18 bits) with information of what bits in PE
- that a user can change the value on using ioctl's.
- Bit set = changeable.
-
-config ETRAX_PV_CHANGEABLE_DIR
- hex "PV user changeable dir mask"
- depends on ETRAX_VIRTUAL_GPIO
- default "0x0000"
- help
- This is a bitmask (16 bits) with information of what bits in PV
- that a user can change direction on using ioctl's.
- Bit set = changeable.
- You probably want 0x0000 here, but it depends on your hardware.
-
-config ETRAX_PV_CHANGEABLE_BITS
- hex "PV user changeable bits mask"
- depends on ETRAX_VIRTUAL_GPIO
- default "0x0000"
- help
- This is a bitmask (16 bits) with information of what bits in PV
- that a user can change the value on using ioctl's.
- Bit set = changeable.
-
config ETRAX_CARDBUS
bool "Cardbus support"
depends on ETRAX_ARCH_V32
diff --git a/arch/cris/arch-v32/drivers/mach-a3/Makefile b/arch/cris/arch-v32/drivers/mach-a3/Makefile
index 5c6d2a2a080e..59028d0b981c 100644
--- a/arch/cris/arch-v32/drivers/mach-a3/Makefile
+++ b/arch/cris/arch-v32/drivers/mach-a3/Makefile
@@ -3,4 +3,3 @@
#
obj-$(CONFIG_ETRAX_NANDFLASH) += nandflash.o
-obj-$(CONFIG_ETRAX_GPIO) += gpio.o
diff --git a/arch/cris/arch-v32/drivers/mach-a3/gpio.c b/arch/cris/arch-v32/drivers/mach-a3/gpio.c
deleted file mode 100644
index c92e1da3684d..000000000000
--- a/arch/cris/arch-v32/drivers/mach-a3/gpio.c
+++ /dev/null
@@ -1,999 +0,0 @@
-/*
- * Artec-3 general port I/O device
- *
- * Copyright (c) 2007 Axis Communications AB
- *
- * Authors: Bjorn Wesen (initial version)
- * Ola Knutsson (LED handling)
- * Johan Adolfsson (read/set directions, write, port G,
- * port to ETRAX FS.
- * Ricard Wanderlof (PWM for Artpec-3)
- *
- */
-
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/ioport.h>
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/fs.h>
-#include <linux/string.h>
-#include <linux/poll.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/spinlock.h>
-#include <linux/mutex.h>
-
-#include <asm/etraxgpio.h>
-#include <hwregs/reg_map.h>
-#include <hwregs/reg_rdwr.h>
-#include <hwregs/gio_defs.h>
-#include <hwregs/intr_vect_defs.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <mach/pinmux.h>
-
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
-#include "../i2c.h"
-
-#define VIRT_I2C_ADDR 0x40
-#endif
-
-/* The following gio ports on ARTPEC-3 is available:
- * pa 32 bits
- * pb 32 bits
- * pc 16 bits
- * each port has a rw_px_dout, r_px_din and rw_px_oe register.
- */
-
-#define GPIO_MAJOR 120 /* experimental MAJOR number */
-
-#define I2C_INTERRUPT_BITS 0x300 /* i2c0_done and i2c1_done bits */
-
-#define D(x)
-
-#if 0
-static int dp_cnt;
-#define DP(x) \
- do { \
- dp_cnt++; \
- if (dp_cnt % 1000 == 0) \
- x; \
- } while (0)
-#else
-#define DP(x)
-#endif
-
-static DEFINE_MUTEX(gpio_mutex);
-static char gpio_name[] = "etrax gpio";
-
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
-static int virtual_gpio_ioctl(struct file *file, unsigned int cmd,
- unsigned long arg);
-#endif
-static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
-static ssize_t gpio_write(struct file *file, const char __user *buf,
- size_t count, loff_t *off);
-static int gpio_open(struct inode *inode, struct file *filp);
-static int gpio_release(struct inode *inode, struct file *filp);
-static unsigned int gpio_poll(struct file *filp,
- struct poll_table_struct *wait);
-
-/* private data per open() of this driver */
-
-struct gpio_private {
- struct gpio_private *next;
- /* The IO_CFG_WRITE_MODE_VALUE only support 8 bits: */
- unsigned char clk_mask;
- unsigned char data_mask;
- unsigned char write_msb;
- unsigned char pad1;
- /* These fields are generic */
- unsigned long highalarm, lowalarm;
- wait_queue_head_t alarm_wq;
- int minor;
-};
-
-static void gpio_set_alarm(struct gpio_private *priv);
-static int gpio_leds_ioctl(unsigned int cmd, unsigned long arg);
-static int gpio_pwm_ioctl(struct gpio_private *priv, unsigned int cmd,
- unsigned long arg);
-
-
-/* linked list of alarms to check for */
-
-static struct gpio_private *alarmlist;
-
-static int wanted_interrupts;
-
-static DEFINE_SPINLOCK(gpio_lock);
-
-#define NUM_PORTS (GPIO_MINOR_LAST+1)
-#define GIO_REG_RD_ADDR(reg) \
- (unsigned long *)(regi_gio + REG_RD_ADDR_gio_##reg)
-#define GIO_REG_WR_ADDR(reg) \
- (unsigned long *)(regi_gio + REG_WR_ADDR_gio_##reg)
-static unsigned long led_dummy;
-static unsigned long port_d_dummy; /* Only input on Artpec-3 */
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
-static unsigned long port_e_dummy; /* Non existent on Artpec-3 */
-static unsigned long virtual_dummy;
-static unsigned long virtual_rw_pv_oe = CONFIG_ETRAX_DEF_GIO_PV_OE;
-static unsigned short cached_virtual_gpio_read;
-#endif
-
-static unsigned long *data_out[NUM_PORTS] = {
- GIO_REG_WR_ADDR(rw_pa_dout),
- GIO_REG_WR_ADDR(rw_pb_dout),
- &led_dummy,
- GIO_REG_WR_ADDR(rw_pc_dout),
- &port_d_dummy,
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- &port_e_dummy,
- &virtual_dummy,
-#endif
-};
-
-static unsigned long *data_in[NUM_PORTS] = {
- GIO_REG_RD_ADDR(r_pa_din),
- GIO_REG_RD_ADDR(r_pb_din),
- &led_dummy,
- GIO_REG_RD_ADDR(r_pc_din),
- GIO_REG_RD_ADDR(r_pd_din),
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- &port_e_dummy,
- &virtual_dummy,
-#endif
-};
-
-static unsigned long changeable_dir[NUM_PORTS] = {
- CONFIG_ETRAX_PA_CHANGEABLE_DIR,
- CONFIG_ETRAX_PB_CHANGEABLE_DIR,
- 0,
- CONFIG_ETRAX_PC_CHANGEABLE_DIR,
- 0,
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- 0,
- CONFIG_ETRAX_PV_CHANGEABLE_DIR,
-#endif
-};
-
-static unsigned long changeable_bits[NUM_PORTS] = {
- CONFIG_ETRAX_PA_CHANGEABLE_BITS,
- CONFIG_ETRAX_PB_CHANGEABLE_BITS,
- 0,
- CONFIG_ETRAX_PC_CHANGEABLE_BITS,
- 0,
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- 0,
- CONFIG_ETRAX_PV_CHANGEABLE_BITS,
-#endif
-};
-
-static unsigned long *dir_oe[NUM_PORTS] = {
- GIO_REG_WR_ADDR(rw_pa_oe),
- GIO_REG_WR_ADDR(rw_pb_oe),
- &led_dummy,
- GIO_REG_WR_ADDR(rw_pc_oe),
- &port_d_dummy,
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- &port_e_dummy,
- &virtual_rw_pv_oe,
-#endif
-};
-
-static void gpio_set_alarm(struct gpio_private *priv)
-{
- int bit;
- int intr_cfg;
- int mask;
- int pins;
- unsigned long flags;
-
- spin_lock_irqsave(&gpio_lock, flags);
- intr_cfg = REG_RD_INT(gio, regi_gio, rw_intr_cfg);
- pins = REG_RD_INT(gio, regi_gio, rw_intr_pins);
- mask = REG_RD_INT(gio, regi_gio, rw_intr_mask) & I2C_INTERRUPT_BITS;
-
- for (bit = 0; bit < 32; bit++) {
- int intr = bit % 8;
- int pin = bit / 8;
- if (priv->minor < GPIO_MINOR_LEDS)
- pin += priv->minor * 4;
- else
- pin += (priv->minor - 1) * 4;
-
- if (priv->highalarm & (1<<bit)) {
- intr_cfg |= (regk_gio_hi << (intr * 3));
- mask |= 1 << intr;
- wanted_interrupts = mask & 0xff;
- pins |= pin << (intr * 4);
- } else if (priv->lowalarm & (1<<bit)) {
- intr_cfg |= (regk_gio_lo << (intr * 3));
- mask |= 1 << intr;
- wanted_interrupts = mask & 0xff;
- pins |= pin << (intr * 4);
- }
- }
-
- REG_WR_INT(gio, regi_gio, rw_intr_cfg, intr_cfg);
- REG_WR_INT(gio, regi_gio, rw_intr_pins, pins);
- REG_WR_INT(gio, regi_gio, rw_intr_mask, mask);
-
- spin_unlock_irqrestore(&gpio_lock, flags);
-}
-
-static unsigned int gpio_poll(struct file *file, struct poll_table_struct *wait)
-{
- unsigned int mask = 0;
- struct gpio_private *priv = file->private_data;
- unsigned long data;
- unsigned long tmp;
-
- if (priv->minor >= GPIO_MINOR_PWM0 &&
- priv->minor <= GPIO_MINOR_LAST_PWM)
- return 0;
-
- poll_wait(file, &priv->alarm_wq, wait);
- if (priv->minor <= GPIO_MINOR_D) {
- data = readl(data_in[priv->minor]);
- REG_WR_INT(gio, regi_gio, rw_ack_intr, wanted_interrupts);
- tmp = REG_RD_INT(gio, regi_gio, rw_intr_mask);
- tmp &= I2C_INTERRUPT_BITS;
- tmp |= wanted_interrupts;
- REG_WR_INT(gio, regi_gio, rw_intr_mask, tmp);
- } else
- return 0;
-
- if ((data & priv->highalarm) || (~data & priv->lowalarm))
- mask = POLLIN|POLLRDNORM;
-
- DP(printk(KERN_DEBUG "gpio_poll ready: mask 0x%08X\n", mask));
- return mask;
-}
-
-static irqreturn_t gpio_interrupt(int irq, void *dev_id)
-{
- reg_gio_rw_intr_mask intr_mask;
- reg_gio_r_masked_intr masked_intr;
- reg_gio_rw_ack_intr ack_intr;
- unsigned long flags;
- unsigned long tmp;
- unsigned long tmp2;
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- unsigned char enable_gpiov_ack = 0;
-#endif
-
- /* Find what PA interrupts are active */
- masked_intr = REG_RD(gio, regi_gio, r_masked_intr);
- tmp = REG_TYPE_CONV(unsigned long, reg_gio_r_masked_intr, masked_intr);
-
- /* Find those that we have enabled */
- spin_lock_irqsave(&gpio_lock, flags);
- tmp &= wanted_interrupts;
- spin_unlock_irqrestore(&gpio_lock, flags);
-
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- /* Something changed on virtual GPIO. Interrupt is acked by
- * reading the device.
- */
- if (tmp & (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN)) {
- i2c_read(VIRT_I2C_ADDR, (void *)&cached_virtual_gpio_read,
- sizeof(cached_virtual_gpio_read));
- enable_gpiov_ack = 1;
- }
-#endif
-
- /* Ack them */
- ack_intr = REG_TYPE_CONV(reg_gio_rw_ack_intr, unsigned long, tmp);
- REG_WR(gio, regi_gio, rw_ack_intr, ack_intr);
-
- /* Disable those interrupts.. */
- intr_mask = REG_RD(gio, regi_gio, rw_intr_mask);
- tmp2 = REG_TYPE_CONV(unsigned long, reg_gio_rw_intr_mask, intr_mask);
- tmp2 &= ~tmp;
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- /* Do not disable interrupt on virtual GPIO. Changes on virtual
- * pins are only noticed by an interrupt.
- */
- if (enable_gpiov_ack)
- tmp2 |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN);
-#endif
- intr_mask = REG_TYPE_CONV(reg_gio_rw_intr_mask, unsigned long, tmp2);
- REG_WR(gio, regi_gio, rw_intr_mask, intr_mask);
-
- return IRQ_RETVAL(tmp);
-}
-
-static void gpio_write_bit(unsigned long *port, unsigned char data, int bit,
- unsigned char clk_mask, unsigned char data_mask)
-{
- unsigned long shadow = readl(port) & ~clk_mask;
- writel(shadow, port);
- if (data & 1 << bit)
- shadow |= data_mask;
- else
- shadow &= ~data_mask;
- writel(shadow, port);
- /* For FPGA: min 5.0ns (DCC) before CCLK high */
- shadow |= clk_mask;
- writel(shadow, port);
-}
-
-static void gpio_write_byte(struct gpio_private *priv, unsigned long *port,
- unsigned char data)
-{
- int i;
-
- if (priv->write_msb)
- for (i = 7; i >= 0; i--)
- gpio_write_bit(port, data, i, priv->clk_mask,
- priv->data_mask);
- else
- for (i = 0; i <= 7; i++)
- gpio_write_bit(port, data, i, priv->clk_mask,
- priv->data_mask);
-}
-
-
-static ssize_t gpio_write(struct file *file, const char __user *buf,
- size_t count, loff_t *off)
-{
- struct gpio_private *priv = file->private_data;
- unsigned long flags;
- ssize_t retval = count;
- /* Only bits 0-7 may be used for write operations but allow all
- devices except leds... */
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- if (priv->minor == GPIO_MINOR_V)
- return -EFAULT;
-#endif
- if (priv->minor == GPIO_MINOR_LEDS)
- return -EFAULT;
-
- if (priv->minor >= GPIO_MINOR_PWM0 &&
- priv->minor <= GPIO_MINOR_LAST_PWM)
- return -EFAULT;
-
- if (!access_ok(VERIFY_READ, buf, count))
- return -EFAULT;
-
- /* It must have been configured using the IO_CFG_WRITE_MODE */
- /* Perhaps a better error code? */
- if (priv->clk_mask == 0 || priv->data_mask == 0)
- return -EPERM;
-
- D(printk(KERN_DEBUG "gpio_write: %lu to data 0x%02X clk 0x%02X "
- "msb: %i\n",
- count, priv->data_mask, priv->clk_mask, priv->write_msb));
-
- spin_lock_irqsave(&gpio_lock, flags);
-
- while (count--)
- gpio_write_byte(priv, data_out[priv->minor], *buf++);
-
- spin_unlock_irqrestore(&gpio_lock, flags);
- return retval;
-}
-
-static int gpio_open(struct inode *inode, struct file *filp)
-{
- struct gpio_private *priv;
- int p = iminor(inode);
-
- if (p > GPIO_MINOR_LAST_PWM ||
- (p > GPIO_MINOR_LAST && p < GPIO_MINOR_PWM0))
- return -EINVAL;
-
- priv = kmalloc(sizeof(struct gpio_private), GFP_KERNEL);
-
- if (!priv)
- return -ENOMEM;
-
- mutex_lock(&gpio_mutex);
- memset(priv, 0, sizeof(*priv));
-
- priv->minor = p;
- filp->private_data = priv;
-
- /* initialize the io/alarm struct, not for PWM ports though */
- if (p <= GPIO_MINOR_LAST) {
-
- priv->clk_mask = 0;
- priv->data_mask = 0;
- priv->highalarm = 0;
- priv->lowalarm = 0;
-
- init_waitqueue_head(&priv->alarm_wq);
-
- /* link it into our alarmlist */
- spin_lock_irq(&gpio_lock);
- priv->next = alarmlist;
- alarmlist = priv;
- spin_unlock_irq(&gpio_lock);
- }
-
- mutex_unlock(&gpio_mutex);
- return 0;
-}
-
-static int gpio_release(struct inode *inode, struct file *filp)
-{
- struct gpio_private *p;
- struct gpio_private *todel;
- /* local copies while updating them: */
- unsigned long a_high, a_low;
-
- /* prepare to free private structure */
- todel = filp->private_data;
-
- /* unlink from alarmlist - only for non-PWM ports though */
- if (todel->minor <= GPIO_MINOR_LAST) {
- spin_lock_irq(&gpio_lock);
- p = alarmlist;
-
- if (p == todel)
- alarmlist = todel->next;
- else {
- while (p->next != todel)
- p = p->next;
- p->next = todel->next;
- }
-
- /* Check if there are still any alarms set */
- p = alarmlist;
- a_high = 0;
- a_low = 0;
- while (p) {
- if (p->minor == GPIO_MINOR_A) {
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- p->lowalarm |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN);
-#endif
- a_high |= p->highalarm;
- a_low |= p->lowalarm;
- }
-
- p = p->next;
- }
-
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- /* Variable 'a_low' needs to be set here again
- * to ensure that interrupt for virtual GPIO is handled.
- */
- a_low |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN);
-#endif
-
- spin_unlock_irq(&gpio_lock);
- }
- kfree(todel);
-
- return 0;
-}
-
-/* Main device API. ioctl's to read/set/clear bits, as well as to
- * set alarms to wait for using a subsequent select().
- */
-
-inline unsigned long setget_input(struct gpio_private *priv, unsigned long arg)
-{
- /* Set direction 0=unchanged 1=input,
- * return mask with 1=input
- */
- unsigned long flags;
- unsigned long dir_shadow;
-
- spin_lock_irqsave(&gpio_lock, flags);
-
- dir_shadow = readl(dir_oe[priv->minor]) &
- ~(arg & changeable_dir[priv->minor]);
- writel(dir_shadow, dir_oe[priv->minor]);
-
- spin_unlock_irqrestore(&gpio_lock, flags);
-
- if (priv->minor == GPIO_MINOR_C)
- dir_shadow ^= 0xFFFF; /* Only 16 bits */
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- else if (priv->minor == GPIO_MINOR_V)
- dir_shadow ^= 0xFFFF; /* Only 16 bits */
-#endif
- else
- dir_shadow ^= 0xFFFFFFFF; /* PA, PB and PD 32 bits */
-
- return dir_shadow;
-
-} /* setget_input */
-
-static inline unsigned long setget_output(struct gpio_private *priv,
- unsigned long arg)
-{
- unsigned long flags;
- unsigned long dir_shadow;
-
- spin_lock_irqsave(&gpio_lock, flags);
-
- dir_shadow = readl(dir_oe[priv->minor]) |
- (arg & changeable_dir[priv->minor]);
- writel(dir_shadow, dir_oe[priv->minor]);
-
- spin_unlock_irqrestore(&gpio_lock, flags);
- return dir_shadow;
-} /* setget_output */
-
-static long gpio_ioctl_unlocked(struct file *file,
- unsigned int cmd, unsigned long arg)
-{
- unsigned long flags;
- unsigned long val;
- unsigned long shadow;
- struct gpio_private *priv = file->private_data;
-
- if (_IOC_TYPE(cmd) != ETRAXGPIO_IOCTYPE)
- return -ENOTTY;
-
- /* Check for special ioctl handlers first */
-
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- if (priv->minor == GPIO_MINOR_V)
- return virtual_gpio_ioctl(file, cmd, arg);
-#endif
-
- if (priv->minor == GPIO_MINOR_LEDS)
- return gpio_leds_ioctl(cmd, arg);
-
- if (priv->minor >= GPIO_MINOR_PWM0 &&
- priv->minor <= GPIO_MINOR_LAST_PWM)
- return gpio_pwm_ioctl(priv, cmd, arg);
-
- switch (_IOC_NR(cmd)) {
- case IO_READBITS: /* Use IO_READ_INBITS and IO_READ_OUTBITS instead */
- /* Read the port. */
- return readl(data_in[priv->minor]);
- case IO_SETBITS:
- spin_lock_irqsave(&gpio_lock, flags);
- /* Set changeable bits with a 1 in arg. */
- shadow = readl(data_out[priv->minor]) |
- (arg & changeable_bits[priv->minor]);
- writel(shadow, data_out[priv->minor]);
- spin_unlock_irqrestore(&gpio_lock, flags);
- break;
- case IO_CLRBITS:
- spin_lock_irqsave(&gpio_lock, flags);
- /* Clear changeable bits with a 1 in arg. */
- shadow = readl(data_out[priv->minor]) &
- ~(arg & changeable_bits[priv->minor]);
- writel(shadow, data_out[priv->minor]);
- spin_unlock_irqrestore(&gpio_lock, flags);
- break;
- case IO_HIGHALARM:
- /* Set alarm when bits with 1 in arg go high. */
- priv->highalarm |= arg;
- gpio_set_alarm(priv);
- break;
- case IO_LOWALARM:
- /* Set alarm when bits with 1 in arg go low. */
- priv->lowalarm |= arg;
- gpio_set_alarm(priv);
- break;
- case IO_CLRALARM:
- /* Clear alarm for bits with 1 in arg. */
- priv->highalarm &= ~arg;
- priv->lowalarm &= ~arg;
- gpio_set_alarm(priv);
- break;
- case IO_READDIR: /* Use IO_SETGET_INPUT/OUTPUT instead! */
- /* Read direction 0=input 1=output */
- return readl(dir_oe[priv->minor]);
-
- case IO_SETINPUT: /* Use IO_SETGET_INPUT instead! */
- /* Set direction 0=unchanged 1=input,
- * return mask with 1=input
- */
- return setget_input(priv, arg);
-
- case IO_SETOUTPUT: /* Use IO_SETGET_OUTPUT instead! */
- /* Set direction 0=unchanged 1=output,
- * return mask with 1=output
- */
- return setget_output(priv, arg);
-
- case IO_CFG_WRITE_MODE:
- {
- int res = -EPERM;
- unsigned long dir_shadow, clk_mask, data_mask, write_msb;
-
- clk_mask = arg & 0xFF;
- data_mask = (arg >> 8) & 0xFF;
- write_msb = (arg >> 16) & 0x01;
-
- /* Check if we're allowed to change the bits and
- * the direction is correct
- */
- spin_lock_irqsave(&gpio_lock, flags);
- dir_shadow = readl(dir_oe[priv->minor]);
- if ((clk_mask & changeable_bits[priv->minor]) &&
- (data_mask & changeable_bits[priv->minor]) &&
- (clk_mask & dir_shadow) &&
- (data_mask & dir_shadow)) {
- priv->clk_mask = clk_mask;
- priv->data_mask = data_mask;
- priv->write_msb = write_msb;
- res = 0;
- }
- spin_unlock_irqrestore(&gpio_lock, flags);
-
- return res;
- }
- case IO_READ_INBITS:
- /* *arg is result of reading the input pins */
- val = readl(data_in[priv->minor]);
- if (copy_to_user((void __user *)arg, &val, sizeof(val)))
- return -EFAULT;
- return 0;
- case IO_READ_OUTBITS:
- /* *arg is result of reading the output shadow */
- val = *data_out[priv->minor];
- if (copy_to_user((void __user *)arg, &val, sizeof(val)))
- return -EFAULT;
- break;
- case IO_SETGET_INPUT:
- /* bits set in *arg is set to input,
- * *arg updated with current input pins.
- */
- if (copy_from_user(&val, (void __user *)arg, sizeof(val)))
- return -EFAULT;
- val = setget_input(priv, val);
- if (copy_to_user((void __user *)arg, &val, sizeof(val)))
- return -EFAULT;
- break;
- case IO_SETGET_OUTPUT:
- /* bits set in *arg is set to output,
- * *arg updated with current output pins.
- */
- if (copy_from_user(&val, (void __user *)arg, sizeof(val)))
- return -EFAULT;
- val = setget_output(priv, val);
- if (copy_to_user((void __user *)arg, &val, sizeof(val)))
- return -EFAULT;
- break;
- default:
- return -EINVAL;
- } /* switch */
-
- return 0;
-}
-
-static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-{
- long ret;
-
- mutex_lock(&gpio_mutex);
- ret = gpio_ioctl_unlocked(file, cmd, arg);
- mutex_unlock(&gpio_mutex);
-
- return ret;
-}
-
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
-static int virtual_gpio_ioctl(struct file *file, unsigned int cmd,
- unsigned long arg)
-{
- unsigned long flags;
- unsigned short val;
- unsigned short shadow;
- struct gpio_private *priv = file->private_data;
-
- switch (_IOC_NR(cmd)) {
- case IO_SETBITS:
- spin_lock_irqsave(&gpio_lock, flags);
- /* Set changeable bits with a 1 in arg. */
- i2c_read(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
- shadow |= ~readl(dir_oe[priv->minor]) |
- (arg & changeable_bits[priv->minor]);
- i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
- spin_unlock_irqrestore(&gpio_lock, flags);
- break;
- case IO_CLRBITS:
- spin_lock_irqsave(&gpio_lock, flags);
- /* Clear changeable bits with a 1 in arg. */
- i2c_read(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
- shadow |= ~readl(dir_oe[priv->minor]) &
- ~(arg & changeable_bits[priv->minor]);
- i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
- spin_unlock_irqrestore(&gpio_lock, flags);
- break;
- case IO_HIGHALARM:
- /* Set alarm when bits with 1 in arg go high. */
- priv->highalarm |= arg;
- break;
- case IO_LOWALARM:
- /* Set alarm when bits with 1 in arg go low. */
- priv->lowalarm |= arg;
- break;
- case IO_CLRALARM:
- /* Clear alarm for bits with 1 in arg. */
- priv->highalarm &= ~arg;
- priv->lowalarm &= ~arg;
- break;
- case IO_CFG_WRITE_MODE:
- {
- unsigned long dir_shadow;
- dir_shadow = readl(dir_oe[priv->minor]);
-
- priv->clk_mask = arg & 0xFF;
- priv->data_mask = (arg >> 8) & 0xFF;
- priv->write_msb = (arg >> 16) & 0x01;
- /* Check if we're allowed to change the bits and
- * the direction is correct
- */
- if (!((priv->clk_mask & changeable_bits[priv->minor]) &&
- (priv->data_mask & changeable_bits[priv->minor]) &&
- (priv->clk_mask & dir_shadow) &&
- (priv->data_mask & dir_shadow))) {
- priv->clk_mask = 0;
- priv->data_mask = 0;
- return -EPERM;
- }
- break;
- }
- case IO_READ_INBITS:
- /* *arg is result of reading the input pins */
- val = cached_virtual_gpio_read & ~readl(dir_oe[priv->minor]);
- if (copy_to_user((void __user *)arg, &val, sizeof(val)))
- return -EFAULT;
- return 0;
-
- case IO_READ_OUTBITS:
- /* *arg is result of reading the output shadow */
- i2c_read(VIRT_I2C_ADDR, (void *)&val, sizeof(val));
- val &= readl(dir_oe[priv->minor]);
- if (copy_to_user((void __user *)arg, &val, sizeof(val)))
- return -EFAULT;
- break;
- case IO_SETGET_INPUT:
- {
- /* bits set in *arg is set to input,
- * *arg updated with current input pins.
- */
- unsigned short input_mask = ~readl(dir_oe[priv->minor]);
- if (copy_from_user(&val, (void __user *)arg, sizeof(val)))
- return -EFAULT;
- val = setget_input(priv, val);
- if (copy_to_user((void __user *)arg, &val, sizeof(val)))
- return -EFAULT;
- if ((input_mask & val) != input_mask) {
- /* Input pins changed. All ports desired as input
- * should be set to logic 1.
- */
- unsigned short change = input_mask ^ val;
- i2c_read(VIRT_I2C_ADDR, (void *)&shadow,
- sizeof(shadow));
- shadow &= ~change;
- shadow |= val;
- i2c_write(VIRT_I2C_ADDR, (void *)&shadow,
- sizeof(shadow));
- }
- break;
- }
- case IO_SETGET_OUTPUT:
- /* bits set in *arg is set to output,
- * *arg updated with current output pins.
- */
- if (copy_from_user(&val, (void __user *)arg, sizeof(val)))
- return -EFAULT;
- val = setget_output(priv, val);
- if (copy_to_user((void __user *)arg, &val, sizeof(val)))
- return -EFAULT;
- break;
- default:
- return -EINVAL;
- } /* switch */
- return 0;
-}
-#endif /* CONFIG_ETRAX_VIRTUAL_GPIO */
-
-static int gpio_leds_ioctl(unsigned int cmd, unsigned long arg)
-{
- unsigned char green;
- unsigned char red;
-
- switch (_IOC_NR(cmd)) {
- case IO_LEDACTIVE_SET:
- green = ((unsigned char) arg) & 1;
- red = (((unsigned char) arg) >> 1) & 1;
- CRIS_LED_ACTIVE_SET_G(green);
- CRIS_LED_ACTIVE_SET_R(red);
- break;
-
- default:
- return -EINVAL;
- } /* switch */
-
- return 0;
-}
-
-static int gpio_pwm_set_mode(unsigned long arg, int pwm_port)
-{
- int pinmux_pwm = pinmux_pwm0 + pwm_port;
- int mode;
- reg_gio_rw_pwm0_ctrl rw_pwm_ctrl = {
- .ccd_val = 0,
- .ccd_override = regk_gio_no,
- .mode = regk_gio_no
- };
- int allocstatus;
-
- if (get_user(mode, &((struct io_pwm_set_mode *) arg)->mode))
- return -EFAULT;
- rw_pwm_ctrl.mode = mode;
- if (mode != PWM_OFF)
- allocstatus = crisv32_pinmux_alloc_fixed(pinmux_pwm);
- else
- allocstatus = crisv32_pinmux_dealloc_fixed(pinmux_pwm);
- if (allocstatus)
- return allocstatus;
- REG_WRITE(reg_gio_rw_pwm0_ctrl, REG_ADDR(gio, regi_gio, rw_pwm0_ctrl) +
- 12 * pwm_port, rw_pwm_ctrl);
- return 0;
-}
-
-static int gpio_pwm_set_period(unsigned long arg, int pwm_port)
-{
- struct io_pwm_set_period periods;
- reg_gio_rw_pwm0_var rw_pwm_widths;
-
- if (copy_from_user(&periods, (void __user *)arg, sizeof(periods)))
- return -EFAULT;
- if (periods.lo > 8191 || periods.hi > 8191)
- return -EINVAL;
- rw_pwm_widths.lo = periods.lo;
- rw_pwm_widths.hi = periods.hi;
- REG_WRITE(reg_gio_rw_pwm0_var, REG_ADDR(gio, regi_gio, rw_pwm0_var) +
- 12 * pwm_port, rw_pwm_widths);
- return 0;
-}
-
-static int gpio_pwm_set_duty(unsigned long arg, int pwm_port)
-{
- unsigned int duty;
- reg_gio_rw_pwm0_data rw_pwm_duty;
-
- if (get_user(duty, &((struct io_pwm_set_duty *) arg)->duty))
- return -EFAULT;
- if (duty > 255)
- return -EINVAL;
- rw_pwm_duty.data = duty;
- REG_WRITE(reg_gio_rw_pwm0_data, REG_ADDR(gio, regi_gio, rw_pwm0_data) +
- 12 * pwm_port, rw_pwm_duty);
- return 0;
-}
-
-static int gpio_pwm_ioctl(struct gpio_private *priv, unsigned int cmd,
- unsigned long arg)
-{
- int pwm_port = priv->minor - GPIO_MINOR_PWM0;
-
- switch (_IOC_NR(cmd)) {
- case IO_PWM_SET_MODE:
- return gpio_pwm_set_mode(arg, pwm_port);
- case IO_PWM_SET_PERIOD:
- return gpio_pwm_set_period(arg, pwm_port);
- case IO_PWM_SET_DUTY:
- return gpio_pwm_set_duty(arg, pwm_port);
- default:
- return -EINVAL;
- }
- return 0;
-}
-
-static const struct file_operations gpio_fops = {
- .owner = THIS_MODULE,
- .poll = gpio_poll,
- .unlocked_ioctl = gpio_ioctl,
- .write = gpio_write,
- .open = gpio_open,
- .release = gpio_release,
- .llseek = noop_llseek,
-};
-
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
-static void __init virtual_gpio_init(void)
-{
- reg_gio_rw_intr_cfg intr_cfg;
- reg_gio_rw_intr_mask intr_mask;
- unsigned short shadow;
-
- shadow = ~virtual_rw_pv_oe; /* Input ports should be set to logic 1 */
- shadow |= CONFIG_ETRAX_DEF_GIO_PV_OUT;
- i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
-
- /* Set interrupt mask and on what state the interrupt shall trigger.
- * For virtual gpio the interrupt shall trigger on logic '0'.
- */
- intr_cfg = REG_RD(gio, regi_gio, rw_intr_cfg);
- intr_mask = REG_RD(gio, regi_gio, rw_intr_mask);
-
- switch (CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN) {
- case 0:
- intr_cfg.pa0 = regk_gio_lo;
- intr_mask.pa0 = regk_gio_yes;
- break;
- case 1:
- intr_cfg.pa1 = regk_gio_lo;
- intr_mask.pa1 = regk_gio_yes;
- break;
- case 2:
- intr_cfg.pa2 = regk_gio_lo;
- intr_mask.pa2 = regk_gio_yes;
- break;
- case 3:
- intr_cfg.pa3 = regk_gio_lo;
- intr_mask.pa3 = regk_gio_yes;
- break;
- case 4:
- intr_cfg.pa4 = regk_gio_lo;
- intr_mask.pa4 = regk_gio_yes;
- break;
- case 5:
- intr_cfg.pa5 = regk_gio_lo;
- intr_mask.pa5 = regk_gio_yes;
- break;
- case 6:
- intr_cfg.pa6 = regk_gio_lo;
- intr_mask.pa6 = regk_gio_yes;
- break;
- case 7:
- intr_cfg.pa7 = regk_gio_lo;
- intr_mask.pa7 = regk_gio_yes;
- break;
- }
-
- REG_WR(gio, regi_gio, rw_intr_cfg, intr_cfg);
- REG_WR(gio, regi_gio, rw_intr_mask, intr_mask);
-}
-#endif
-
-/* main driver initialization routine, called from mem.c */
-
-static int __init gpio_init(void)
-{
- int res, res2;
-
- printk(KERN_INFO "ETRAX FS GPIO driver v2.7, (c) 2003-2008 "
- "Axis Communications AB\n");
-
- /* do the formalities */
-
- res = register_chrdev(GPIO_MAJOR, gpio_name, &gpio_fops);
- if (res < 0) {
- printk(KERN_ERR "gpio: couldn't get a major number.\n");
- return res;
- }
-
- /* Clear all leds */
- CRIS_LED_NETWORK_GRP0_SET(0);
- CRIS_LED_NETWORK_GRP1_SET(0);
- CRIS_LED_ACTIVE_SET(0);
- CRIS_LED_DISK_READ(0);
- CRIS_LED_DISK_WRITE(0);
-
- res2 = request_irq(GIO_INTR_VECT, gpio_interrupt,
- IRQF_SHARED, "gpio", &alarmlist);
- if (res2) {
- printk(KERN_ERR "err: irq for gpio\n");
- return res2;
- }
-
- /* No IRQs by default. */
- REG_WR_INT(gio, regi_gio, rw_intr_pins, 0);
-
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- virtual_gpio_init();
-#endif
-
- return res;
-}
-
-/* this makes sure that gpio_init is called during kernel boot */
-
-module_init(gpio_init);
diff --git a/arch/cris/arch-v32/drivers/mach-fs/Makefile b/arch/cris/arch-v32/drivers/mach-fs/Makefile
index 5c6d2a2a080e..59028d0b981c 100644
--- a/arch/cris/arch-v32/drivers/mach-fs/Makefile
+++ b/arch/cris/arch-v32/drivers/mach-fs/Makefile
@@ -3,4 +3,3 @@
#
obj-$(CONFIG_ETRAX_NANDFLASH) += nandflash.o
-obj-$(CONFIG_ETRAX_GPIO) += gpio.o
diff --git a/arch/cris/arch-v32/drivers/mach-fs/gpio.c b/arch/cris/arch-v32/drivers/mach-fs/gpio.c
deleted file mode 100644
index 72968fbf814b..000000000000
--- a/arch/cris/arch-v32/drivers/mach-fs/gpio.c
+++ /dev/null
@@ -1,978 +0,0 @@
-/*
- * ETRAX CRISv32 general port I/O device
- *
- * Copyright (c) 1999-2006 Axis Communications AB
- *
- * Authors: Bjorn Wesen (initial version)
- * Ola Knutsson (LED handling)
- * Johan Adolfsson (read/set directions, write, port G,
- * port to ETRAX FS.
- *
- */
-
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/ioport.h>
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/fs.h>
-#include <linux/string.h>
-#include <linux/poll.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/spinlock.h>
-#include <linux/mutex.h>
-
-#include <asm/etraxgpio.h>
-#include <hwregs/reg_map.h>
-#include <hwregs/reg_rdwr.h>
-#include <hwregs/gio_defs.h>
-#include <hwregs/intr_vect_defs.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
-#include "../i2c.h"
-
-#define VIRT_I2C_ADDR 0x40
-#endif
-
-/* The following gio ports on ETRAX FS is available:
- * pa 8 bits, supports interrupts off, hi, low, set, posedge, negedge anyedge
- * pb 18 bits
- * pc 18 bits
- * pd 18 bits
- * pe 18 bits
- * each port has a rw_px_dout, r_px_din and rw_px_oe register.
- */
-
-#define GPIO_MAJOR 120 /* experimental MAJOR number */
-
-#define D(x)
-
-#if 0
-static int dp_cnt;
-#define DP(x) \
- do { \
- dp_cnt++; \
- if (dp_cnt % 1000 == 0) \
- x; \
- } while (0)
-#else
-#define DP(x)
-#endif
-
-static DEFINE_MUTEX(gpio_mutex);
-static char gpio_name[] = "etrax gpio";
-
-#if 0
-static wait_queue_head_t *gpio_wq;
-#endif
-
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
-static int virtual_gpio_ioctl(struct file *file, unsigned int cmd,
- unsigned long arg);
-#endif
-static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
-static ssize_t gpio_write(struct file *file, const char *buf, size_t count,
- loff_t *off);
-static int gpio_open(struct inode *inode, struct file *filp);
-static int gpio_release(struct inode *inode, struct file *filp);
-static unsigned int gpio_poll(struct file *filp,
- struct poll_table_struct *wait);
-
-/* private data per open() of this driver */
-
-struct gpio_private {
- struct gpio_private *next;
- /* The IO_CFG_WRITE_MODE_VALUE only support 8 bits: */
- unsigned char clk_mask;
- unsigned char data_mask;
- unsigned char write_msb;
- unsigned char pad1;
- /* These fields are generic */
- unsigned long highalarm, lowalarm;
- wait_queue_head_t alarm_wq;
- int minor;
-};
-
-/* linked list of alarms to check for */
-
-static struct gpio_private *alarmlist;
-
-static int gpio_some_alarms; /* Set if someone uses alarm */
-static unsigned long gpio_pa_high_alarms;
-static unsigned long gpio_pa_low_alarms;
-
-static DEFINE_SPINLOCK(alarm_lock);
-
-#define NUM_PORTS (GPIO_MINOR_LAST+1)
-#define GIO_REG_RD_ADDR(reg) \
- (volatile unsigned long *)(regi_gio + REG_RD_ADDR_gio_##reg)
-#define GIO_REG_WR_ADDR(reg) \
- (volatile unsigned long *)(regi_gio + REG_RD_ADDR_gio_##reg)
-unsigned long led_dummy;
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
-static unsigned long virtual_dummy;
-static unsigned long virtual_rw_pv_oe = CONFIG_ETRAX_DEF_GIO_PV_OE;
-static unsigned short cached_virtual_gpio_read;
-#endif
-
-static volatile unsigned long *data_out[NUM_PORTS] = {
- GIO_REG_WR_ADDR(rw_pa_dout),
- GIO_REG_WR_ADDR(rw_pb_dout),
- &led_dummy,
- GIO_REG_WR_ADDR(rw_pc_dout),
- GIO_REG_WR_ADDR(rw_pd_dout),
- GIO_REG_WR_ADDR(rw_pe_dout),
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- &virtual_dummy,
-#endif
-};
-
-static volatile unsigned long *data_in[NUM_PORTS] = {
- GIO_REG_RD_ADDR(r_pa_din),
- GIO_REG_RD_ADDR(r_pb_din),
- &led_dummy,
- GIO_REG_RD_ADDR(r_pc_din),
- GIO_REG_RD_ADDR(r_pd_din),
- GIO_REG_RD_ADDR(r_pe_din),
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- &virtual_dummy,
-#endif
-};
-
-static unsigned long changeable_dir[NUM_PORTS] = {
- CONFIG_ETRAX_PA_CHANGEABLE_DIR,
- CONFIG_ETRAX_PB_CHANGEABLE_DIR,
- 0,
- CONFIG_ETRAX_PC_CHANGEABLE_DIR,
- CONFIG_ETRAX_PD_CHANGEABLE_DIR,
- CONFIG_ETRAX_PE_CHANGEABLE_DIR,
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- CONFIG_ETRAX_PV_CHANGEABLE_DIR,
-#endif
-};
-
-static unsigned long changeable_bits[NUM_PORTS] = {
- CONFIG_ETRAX_PA_CHANGEABLE_BITS,
- CONFIG_ETRAX_PB_CHANGEABLE_BITS,
- 0,
- CONFIG_ETRAX_PC_CHANGEABLE_BITS,
- CONFIG_ETRAX_PD_CHANGEABLE_BITS,
- CONFIG_ETRAX_PE_CHANGEABLE_BITS,
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- CONFIG_ETRAX_PV_CHANGEABLE_BITS,
-#endif
-};
-
-static volatile unsigned long *dir_oe[NUM_PORTS] = {
- GIO_REG_WR_ADDR(rw_pa_oe),
- GIO_REG_WR_ADDR(rw_pb_oe),
- &led_dummy,
- GIO_REG_WR_ADDR(rw_pc_oe),
- GIO_REG_WR_ADDR(rw_pd_oe),
- GIO_REG_WR_ADDR(rw_pe_oe),
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- &virtual_rw_pv_oe,
-#endif
-};
-
-
-
-static unsigned int gpio_poll(struct file *file, struct poll_table_struct *wait)
-{
- unsigned int mask = 0;
- struct gpio_private *priv = file->private_data;
- unsigned long data;
- poll_wait(file, &priv->alarm_wq, wait);
- if (priv->minor == GPIO_MINOR_A) {
- reg_gio_rw_intr_cfg intr_cfg;
- unsigned long tmp;
- unsigned long flags;
-
- local_irq_save(flags);
- data = REG_TYPE_CONV(unsigned long, reg_gio_r_pa_din,
- REG_RD(gio, regi_gio, r_pa_din));
- /* PA has support for interrupt
- * lets activate high for those low and with highalarm set
- */
- intr_cfg = REG_RD(gio, regi_gio, rw_intr_cfg);
-
- tmp = ~data & priv->highalarm & 0xFF;
- if (tmp & (1 << 0))
- intr_cfg.pa0 = regk_gio_hi;
- if (tmp & (1 << 1))
- intr_cfg.pa1 = regk_gio_hi;
- if (tmp & (1 << 2))
- intr_cfg.pa2 = regk_gio_hi;
- if (tmp & (1 << 3))
- intr_cfg.pa3 = regk_gio_hi;
- if (tmp & (1 << 4))
- intr_cfg.pa4 = regk_gio_hi;
- if (tmp & (1 << 5))
- intr_cfg.pa5 = regk_gio_hi;
- if (tmp & (1 << 6))
- intr_cfg.pa6 = regk_gio_hi;
- if (tmp & (1 << 7))
- intr_cfg.pa7 = regk_gio_hi;
- /*
- * lets activate low for those high and with lowalarm set
- */
- tmp = data & priv->lowalarm & 0xFF;
- if (tmp & (1 << 0))
- intr_cfg.pa0 = regk_gio_lo;
- if (tmp & (1 << 1))
- intr_cfg.pa1 = regk_gio_lo;
- if (tmp & (1 << 2))
- intr_cfg.pa2 = regk_gio_lo;
- if (tmp & (1 << 3))
- intr_cfg.pa3 = regk_gio_lo;
- if (tmp & (1 << 4))
- intr_cfg.pa4 = regk_gio_lo;
- if (tmp & (1 << 5))
- intr_cfg.pa5 = regk_gio_lo;
- if (tmp & (1 << 6))
- intr_cfg.pa6 = regk_gio_lo;
- if (tmp & (1 << 7))
- intr_cfg.pa7 = regk_gio_lo;
-
- REG_WR(gio, regi_gio, rw_intr_cfg, intr_cfg);
- local_irq_restore(flags);
- } else if (priv->minor <= GPIO_MINOR_E)
- data = *data_in[priv->minor];
- else
- return 0;
-
- if ((data & priv->highalarm) || (~data & priv->lowalarm))
- mask = POLLIN|POLLRDNORM;
-
- DP(printk(KERN_DEBUG "gpio_poll ready: mask 0x%08X\n", mask));
- return mask;
-}
-
-int etrax_gpio_wake_up_check(void)
-{
- struct gpio_private *priv;
- unsigned long data = 0;
- unsigned long flags;
- int ret = 0;
- spin_lock_irqsave(&alarm_lock, flags);
- priv = alarmlist;
- while (priv) {
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- if (priv->minor == GPIO_MINOR_V)
- data = (unsigned long)cached_virtual_gpio_read;
- else {
- data = *data_in[priv->minor];
- if (priv->minor == GPIO_MINOR_A)
- priv->lowalarm |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN);
- }
-#else
- data = *data_in[priv->minor];
-#endif
- if ((data & priv->highalarm) ||
- (~data & priv->lowalarm)) {
- DP(printk(KERN_DEBUG
- "etrax_gpio_wake_up_check %i\n", priv->minor));
- wake_up_interruptible(&priv->alarm_wq);
- ret = 1;
- }
- priv = priv->next;
- }
- spin_unlock_irqrestore(&alarm_lock, flags);
- return ret;
-}
-
-static irqreturn_t
-gpio_poll_timer_interrupt(int irq, void *dev_id)
-{
- if (gpio_some_alarms)
- return IRQ_RETVAL(etrax_gpio_wake_up_check());
- return IRQ_NONE;
-}
-
-static irqreturn_t
-gpio_pa_interrupt(int irq, void *dev_id)
-{
- reg_gio_rw_intr_mask intr_mask;
- reg_gio_r_masked_intr masked_intr;
- reg_gio_rw_ack_intr ack_intr;
- unsigned long tmp;
- unsigned long tmp2;
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- unsigned char enable_gpiov_ack = 0;
-#endif
-
- /* Find what PA interrupts are active */
- masked_intr = REG_RD(gio, regi_gio, r_masked_intr);
- tmp = REG_TYPE_CONV(unsigned long, reg_gio_r_masked_intr, masked_intr);
-
- /* Find those that we have enabled */
- spin_lock(&alarm_lock);
- tmp &= (gpio_pa_high_alarms | gpio_pa_low_alarms);
- spin_unlock(&alarm_lock);
-
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- /* Something changed on virtual GPIO. Interrupt is acked by
- * reading the device.
- */
- if (tmp & (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN)) {
- i2c_read(VIRT_I2C_ADDR, (void *)&cached_virtual_gpio_read,
- sizeof(cached_virtual_gpio_read));
- enable_gpiov_ack = 1;
- }
-#endif
-
- /* Ack them */
- ack_intr = REG_TYPE_CONV(reg_gio_rw_ack_intr, unsigned long, tmp);
- REG_WR(gio, regi_gio, rw_ack_intr, ack_intr);
-
- /* Disable those interrupts.. */
- intr_mask = REG_RD(gio, regi_gio, rw_intr_mask);
- tmp2 = REG_TYPE_CONV(unsigned long, reg_gio_rw_intr_mask, intr_mask);
- tmp2 &= ~tmp;
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- /* Do not disable interrupt on virtual GPIO. Changes on virtual
- * pins are only noticed by an interrupt.
- */
- if (enable_gpiov_ack)
- tmp2 |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN);
-#endif
- intr_mask = REG_TYPE_CONV(reg_gio_rw_intr_mask, unsigned long, tmp2);
- REG_WR(gio, regi_gio, rw_intr_mask, intr_mask);
-
- if (gpio_some_alarms)
- return IRQ_RETVAL(etrax_gpio_wake_up_check());
- return IRQ_NONE;
-}
-
-
-static ssize_t gpio_write(struct file *file, const char *buf, size_t count,
- loff_t *off)
-{
- struct gpio_private *priv = file->private_data;
- unsigned char data, clk_mask, data_mask, write_msb;
- unsigned long flags;
- unsigned long shadow;
- volatile unsigned long *port;
- ssize_t retval = count;
- /* Only bits 0-7 may be used for write operations but allow all
- devices except leds... */
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- if (priv->minor == GPIO_MINOR_V)
- return -EFAULT;
-#endif
- if (priv->minor == GPIO_MINOR_LEDS)
- return -EFAULT;
-
- if (!access_ok(VERIFY_READ, buf, count))
- return -EFAULT;
- clk_mask = priv->clk_mask;
- data_mask = priv->data_mask;
- /* It must have been configured using the IO_CFG_WRITE_MODE */
- /* Perhaps a better error code? */
- if (clk_mask == 0 || data_mask == 0)
- return -EPERM;
- write_msb = priv->write_msb;
- D(printk(KERN_DEBUG "gpio_write: %lu to data 0x%02X clk 0x%02X "
- "msb: %i\n", count, data_mask, clk_mask, write_msb));
- port = data_out[priv->minor];
-
- while (count--) {
- int i;
- data = *buf++;
- if (priv->write_msb) {
- for (i = 7; i >= 0; i--) {
- local_irq_save(flags);
- shadow = *port;
- *port = shadow &= ~clk_mask;
- if (data & 1<<i)
- *port = shadow |= data_mask;
- else
- *port = shadow &= ~data_mask;
- /* For FPGA: min 5.0ns (DCC) before CCLK high */
- *port = shadow |= clk_mask;
- local_irq_restore(flags);
- }
- } else {
- for (i = 0; i <= 7; i++) {
- local_irq_save(flags);
- shadow = *port;
- *port = shadow &= ~clk_mask;
- if (data & 1<<i)
- *port = shadow |= data_mask;
- else
- *port = shadow &= ~data_mask;
- /* For FPGA: min 5.0ns (DCC) before CCLK high */
- *port = shadow |= clk_mask;
- local_irq_restore(flags);
- }
- }
- }
- return retval;
-}
-
-
-
-static int
-gpio_open(struct inode *inode, struct file *filp)
-{
- struct gpio_private *priv;
- int p = iminor(inode);
-
- if (p > GPIO_MINOR_LAST)
- return -EINVAL;
-
- priv = kzalloc(sizeof(struct gpio_private), GFP_KERNEL);
- if (!priv)
- return -ENOMEM;
-
- mutex_lock(&gpio_mutex);
-
- priv->minor = p;
-
- /* initialize the io/alarm struct */
-
- priv->clk_mask = 0;
- priv->data_mask = 0;
- priv->highalarm = 0;
- priv->lowalarm = 0;
- init_waitqueue_head(&priv->alarm_wq);
-
- filp->private_data = (void *)priv;
-
- /* link it into our alarmlist */
- spin_lock_irq(&alarm_lock);
- priv->next = alarmlist;
- alarmlist = priv;
- spin_unlock_irq(&alarm_lock);
-
- mutex_unlock(&gpio_mutex);
- return 0;
-}
-
-static int
-gpio_release(struct inode *inode, struct file *filp)
-{
- struct gpio_private *p;
- struct gpio_private *todel;
- /* local copies while updating them: */
- unsigned long a_high, a_low;
- unsigned long some_alarms;
-
- /* unlink from alarmlist and free the private structure */
-
- spin_lock_irq(&alarm_lock);
- p = alarmlist;
- todel = filp->private_data;
-
- if (p == todel) {
- alarmlist = todel->next;
- } else {
- while (p->next != todel)
- p = p->next;
- p->next = todel->next;
- }
-
- kfree(todel);
- /* Check if there are still any alarms set */
- p = alarmlist;
- some_alarms = 0;
- a_high = 0;
- a_low = 0;
- while (p) {
- if (p->minor == GPIO_MINOR_A) {
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- p->lowalarm |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN);
-#endif
- a_high |= p->highalarm;
- a_low |= p->lowalarm;
- }
-
- if (p->highalarm | p->lowalarm)
- some_alarms = 1;
- p = p->next;
- }
-
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- /* Variables 'some_alarms' and 'a_low' needs to be set here again
- * to ensure that interrupt for virtual GPIO is handled.
- */
- some_alarms = 1;
- a_low |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN);
-#endif
-
- gpio_some_alarms = some_alarms;
- gpio_pa_high_alarms = a_high;
- gpio_pa_low_alarms = a_low;
- spin_unlock_irq(&alarm_lock);
-
- return 0;
-}
-
-/* Main device API. ioctl's to read/set/clear bits, as well as to
- * set alarms to wait for using a subsequent select().
- */
-
-inline unsigned long setget_input(struct gpio_private *priv, unsigned long arg)
-{
- /* Set direction 0=unchanged 1=input,
- * return mask with 1=input
- */
- unsigned long flags;
- unsigned long dir_shadow;
-
- local_irq_save(flags);
- dir_shadow = *dir_oe[priv->minor];
- dir_shadow &= ~(arg & changeable_dir[priv->minor]);
- *dir_oe[priv->minor] = dir_shadow;
- local_irq_restore(flags);
-
- if (priv->minor == GPIO_MINOR_A)
- dir_shadow ^= 0xFF; /* Only 8 bits */
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- else if (priv->minor == GPIO_MINOR_V)
- dir_shadow ^= 0xFFFF; /* Only 16 bits */
-#endif
- else
- dir_shadow ^= 0x3FFFF; /* Only 18 bits */
- return dir_shadow;
-
-} /* setget_input */
-
-inline unsigned long setget_output(struct gpio_private *priv, unsigned long arg)
-{
- unsigned long flags;
- unsigned long dir_shadow;
-
- local_irq_save(flags);
- dir_shadow = *dir_oe[priv->minor];
- dir_shadow |= (arg & changeable_dir[priv->minor]);
- *dir_oe[priv->minor] = dir_shadow;
- local_irq_restore(flags);
- return dir_shadow;
-} /* setget_output */
-
-static int gpio_leds_ioctl(unsigned int cmd, unsigned long arg);
-
-static int
-gpio_ioctl_unlocked(struct file *file, unsigned int cmd, unsigned long arg)
-{
- unsigned long flags;
- unsigned long val;
- unsigned long shadow;
- struct gpio_private *priv = file->private_data;
- if (_IOC_TYPE(cmd) != ETRAXGPIO_IOCTYPE)
- return -EINVAL;
-
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- if (priv->minor == GPIO_MINOR_V)
- return virtual_gpio_ioctl(file, cmd, arg);
-#endif
-
- switch (_IOC_NR(cmd)) {
- case IO_READBITS: /* Use IO_READ_INBITS and IO_READ_OUTBITS instead */
- /* Read the port. */
- return *data_in[priv->minor];
- break;
- case IO_SETBITS:
- local_irq_save(flags);
- /* Set changeable bits with a 1 in arg. */
- shadow = *data_out[priv->minor];
- shadow |= (arg & changeable_bits[priv->minor]);
- *data_out[priv->minor] = shadow;
- local_irq_restore(flags);
- break;
- case IO_CLRBITS:
- local_irq_save(flags);
- /* Clear changeable bits with a 1 in arg. */
- shadow = *data_out[priv->minor];
- shadow &= ~(arg & changeable_bits[priv->minor]);
- *data_out[priv->minor] = shadow;
- local_irq_restore(flags);
- break;
- case IO_HIGHALARM:
- /* Set alarm when bits with 1 in arg go high. */
- priv->highalarm |= arg;
- spin_lock_irqsave(&alarm_lock, flags);
- gpio_some_alarms = 1;
- if (priv->minor == GPIO_MINOR_A)
- gpio_pa_high_alarms |= arg;
- spin_unlock_irqrestore(&alarm_lock, flags);
- break;
- case IO_LOWALARM:
- /* Set alarm when bits with 1 in arg go low. */
- priv->lowalarm |= arg;
- spin_lock_irqsave(&alarm_lock, flags);
- gpio_some_alarms = 1;
- if (priv->minor == GPIO_MINOR_A)
- gpio_pa_low_alarms |= arg;
- spin_unlock_irqrestore(&alarm_lock, flags);
- break;
- case IO_CLRALARM:
- /* Clear alarm for bits with 1 in arg. */
- priv->highalarm &= ~arg;
- priv->lowalarm &= ~arg;
- spin_lock_irqsave(&alarm_lock, flags);
- if (priv->minor == GPIO_MINOR_A) {
- if (gpio_pa_high_alarms & arg ||
- gpio_pa_low_alarms & arg)
- /* Must update the gpio_pa_*alarms masks */
- ;
- }
- spin_unlock_irqrestore(&alarm_lock, flags);
- break;
- case IO_READDIR: /* Use IO_SETGET_INPUT/OUTPUT instead! */
- /* Read direction 0=input 1=output */
- return *dir_oe[priv->minor];
- case IO_SETINPUT: /* Use IO_SETGET_INPUT instead! */
- /* Set direction 0=unchanged 1=input,
- * return mask with 1=input
- */
- return setget_input(priv, arg);
- break;
- case IO_SETOUTPUT: /* Use IO_SETGET_OUTPUT instead! */
- /* Set direction 0=unchanged 1=output,
- * return mask with 1=output
- */
- return setget_output(priv, arg);
-
- case IO_CFG_WRITE_MODE:
- {
- unsigned long dir_shadow;
- dir_shadow = *dir_oe[priv->minor];
-
- priv->clk_mask = arg & 0xFF;
- priv->data_mask = (arg >> 8) & 0xFF;
- priv->write_msb = (arg >> 16) & 0x01;
- /* Check if we're allowed to change the bits and
- * the direction is correct
- */
- if (!((priv->clk_mask & changeable_bits[priv->minor]) &&
- (priv->data_mask & changeable_bits[priv->minor]) &&
- (priv->clk_mask & dir_shadow) &&
- (priv->data_mask & dir_shadow))) {
- priv->clk_mask = 0;
- priv->data_mask = 0;
- return -EPERM;
- }
- break;
- }
- case IO_READ_INBITS:
- /* *arg is result of reading the input pins */
- val = *data_in[priv->minor];
- if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
- return -EFAULT;
- return 0;
- break;
- case IO_READ_OUTBITS:
- /* *arg is result of reading the output shadow */
- val = *data_out[priv->minor];
- if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
- return -EFAULT;
- break;
- case IO_SETGET_INPUT:
- /* bits set in *arg is set to input,
- * *arg updated with current input pins.
- */
- if (copy_from_user(&val, (unsigned long *)arg, sizeof(val)))
- return -EFAULT;
- val = setget_input(priv, val);
- if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
- return -EFAULT;
- break;
- case IO_SETGET_OUTPUT:
- /* bits set in *arg is set to output,
- * *arg updated with current output pins.
- */
- if (copy_from_user(&val, (unsigned long *)arg, sizeof(val)))
- return -EFAULT;
- val = setget_output(priv, val);
- if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
- return -EFAULT;
- break;
- default:
- if (priv->minor == GPIO_MINOR_LEDS)
- return gpio_leds_ioctl(cmd, arg);
- else
- return -EINVAL;
- } /* switch */
-
- return 0;
-}
-
-static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-{
- long ret;
-
- mutex_lock(&gpio_mutex);
- ret = gpio_ioctl_unlocked(file, cmd, arg);
- mutex_unlock(&gpio_mutex);
-
- return ret;
-}
-
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
-static int
-virtual_gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-{
- unsigned long flags;
- unsigned short val;
- unsigned short shadow;
- struct gpio_private *priv = file->private_data;
-
- switch (_IOC_NR(cmd)) {
- case IO_SETBITS:
- local_irq_save(flags);
- /* Set changeable bits with a 1 in arg. */
- i2c_read(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
- shadow |= ~*dir_oe[priv->minor];
- shadow |= (arg & changeable_bits[priv->minor]);
- i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
- local_irq_restore(flags);
- break;
- case IO_CLRBITS:
- local_irq_save(flags);
- /* Clear changeable bits with a 1 in arg. */
- i2c_read(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
- shadow |= ~*dir_oe[priv->minor];
- shadow &= ~(arg & changeable_bits[priv->minor]);
- i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
- local_irq_restore(flags);
- break;
- case IO_HIGHALARM:
- /* Set alarm when bits with 1 in arg go high. */
- priv->highalarm |= arg;
- spin_lock(&alarm_lock);
- gpio_some_alarms = 1;
- spin_unlock(&alarm_lock);
- break;
- case IO_LOWALARM:
- /* Set alarm when bits with 1 in arg go low. */
- priv->lowalarm |= arg;
- spin_lock(&alarm_lock);
- gpio_some_alarms = 1;
- spin_unlock(&alarm_lock);
- break;
- case IO_CLRALARM:
- /* Clear alarm for bits with 1 in arg. */
- priv->highalarm &= ~arg;
- priv->lowalarm &= ~arg;
- spin_lock(&alarm_lock);
- spin_unlock(&alarm_lock);
- break;
- case IO_CFG_WRITE_MODE:
- {
- unsigned long dir_shadow;
- dir_shadow = *dir_oe[priv->minor];
-
- priv->clk_mask = arg & 0xFF;
- priv->data_mask = (arg >> 8) & 0xFF;
- priv->write_msb = (arg >> 16) & 0x01;
- /* Check if we're allowed to change the bits and
- * the direction is correct
- */
- if (!((priv->clk_mask & changeable_bits[priv->minor]) &&
- (priv->data_mask & changeable_bits[priv->minor]) &&
- (priv->clk_mask & dir_shadow) &&
- (priv->data_mask & dir_shadow))) {
- priv->clk_mask = 0;
- priv->data_mask = 0;
- return -EPERM;
- }
- break;
- }
- case IO_READ_INBITS:
- /* *arg is result of reading the input pins */
- val = cached_virtual_gpio_read;
- val &= ~*dir_oe[priv->minor];
- if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
- return -EFAULT;
- return 0;
- break;
- case IO_READ_OUTBITS:
- /* *arg is result of reading the output shadow */
- i2c_read(VIRT_I2C_ADDR, (void *)&val, sizeof(val));
- val &= *dir_oe[priv->minor];
- if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
- return -EFAULT;
- break;
- case IO_SETGET_INPUT:
- {
- /* bits set in *arg is set to input,
- * *arg updated with current input pins.
- */
- unsigned short input_mask = ~*dir_oe[priv->minor];
- if (copy_from_user(&val, (unsigned long *)arg, sizeof(val)))
- return -EFAULT;
- val = setget_input(priv, val);
- if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
- return -EFAULT;
- if ((input_mask & val) != input_mask) {
- /* Input pins changed. All ports desired as input
- * should be set to logic 1.
- */
- unsigned short change = input_mask ^ val;
- i2c_read(VIRT_I2C_ADDR, (void *)&shadow,
- sizeof(shadow));
- shadow &= ~change;
- shadow |= val;
- i2c_write(VIRT_I2C_ADDR, (void *)&shadow,
- sizeof(shadow));
- }
- break;
- }
- case IO_SETGET_OUTPUT:
- /* bits set in *arg is set to output,
- * *arg updated with current output pins.
- */
- if (copy_from_user(&val, (unsigned long *)arg, sizeof(val)))
- return -EFAULT;
- val = setget_output(priv, val);
- if (copy_to_user((unsigned long *)arg, &val, sizeof(val)))
- return -EFAULT;
- break;
- default:
- return -EINVAL;
- } /* switch */
- return 0;
-}
-#endif /* CONFIG_ETRAX_VIRTUAL_GPIO */
-
-static int
-gpio_leds_ioctl(unsigned int cmd, unsigned long arg)
-{
- unsigned char green;
- unsigned char red;
-
- switch (_IOC_NR(cmd)) {
- case IO_LEDACTIVE_SET:
- green = ((unsigned char) arg) & 1;
- red = (((unsigned char) arg) >> 1) & 1;
- CRIS_LED_ACTIVE_SET_G(green);
- CRIS_LED_ACTIVE_SET_R(red);
- break;
-
- default:
- return -EINVAL;
- } /* switch */
-
- return 0;
-}
-
-static const struct file_operations gpio_fops = {
- .owner = THIS_MODULE,
- .poll = gpio_poll,
- .unlocked_ioctl = gpio_ioctl,
- .write = gpio_write,
- .open = gpio_open,
- .release = gpio_release,
- .llseek = noop_llseek,
-};
-
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
-static void
-virtual_gpio_init(void)
-{
- reg_gio_rw_intr_cfg intr_cfg;
- reg_gio_rw_intr_mask intr_mask;
- unsigned short shadow;
-
- shadow = ~virtual_rw_pv_oe; /* Input ports should be set to logic 1 */
- shadow |= CONFIG_ETRAX_DEF_GIO_PV_OUT;
- i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
-
- /* Set interrupt mask and on what state the interrupt shall trigger.
- * For virtual gpio the interrupt shall trigger on logic '0'.
- */
- intr_cfg = REG_RD(gio, regi_gio, rw_intr_cfg);
- intr_mask = REG_RD(gio, regi_gio, rw_intr_mask);
-
- switch (CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN) {
- case 0:
- intr_cfg.pa0 = regk_gio_lo;
- intr_mask.pa0 = regk_gio_yes;
- break;
- case 1:
- intr_cfg.pa1 = regk_gio_lo;
- intr_mask.pa1 = regk_gio_yes;
- break;
- case 2:
- intr_cfg.pa2 = regk_gio_lo;
- intr_mask.pa2 = regk_gio_yes;
- break;
- case 3:
- intr_cfg.pa3 = regk_gio_lo;
- intr_mask.pa3 = regk_gio_yes;
- break;
- case 4:
- intr_cfg.pa4 = regk_gio_lo;
- intr_mask.pa4 = regk_gio_yes;
- break;
- case 5:
- intr_cfg.pa5 = regk_gio_lo;
- intr_mask.pa5 = regk_gio_yes;
- break;
- case 6:
- intr_cfg.pa6 = regk_gio_lo;
- intr_mask.pa6 = regk_gio_yes;
- break;
- case 7:
- intr_cfg.pa7 = regk_gio_lo;
- intr_mask.pa7 = regk_gio_yes;
- break;
- }
-
- REG_WR(gio, regi_gio, rw_intr_cfg, intr_cfg);
- REG_WR(gio, regi_gio, rw_intr_mask, intr_mask);
-
- gpio_pa_low_alarms |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN);
- gpio_some_alarms = 1;
-}
-#endif
-
-/* main driver initialization routine, called from mem.c */
-
-static __init int
-gpio_init(void)
-{
- int res;
-
- /* do the formalities */
-
- res = register_chrdev(GPIO_MAJOR, gpio_name, &gpio_fops);
- if (res < 0) {
- printk(KERN_ERR "gpio: couldn't get a major number.\n");
- return res;
- }
-
- /* Clear all leds */
- CRIS_LED_NETWORK_GRP0_SET(0);
- CRIS_LED_NETWORK_GRP1_SET(0);
- CRIS_LED_ACTIVE_SET(0);
- CRIS_LED_DISK_READ(0);
- CRIS_LED_DISK_WRITE(0);
-
- printk(KERN_INFO "ETRAX FS GPIO driver v2.5, (c) 2003-2007 "
- "Axis Communications AB\n");
- /* We call etrax_gpio_wake_up_check() from timer interrupt */
- if (request_irq(TIMER0_INTR_VECT, gpio_poll_timer_interrupt,
- IRQF_SHARED, "gpio poll", &alarmlist))
- printk(KERN_ERR "timer0 irq for gpio\n");
-
- if (request_irq(GIO_INTR_VECT, gpio_pa_interrupt,
- IRQF_SHARED, "gpio PA", &alarmlist))
- printk(KERN_ERR "PA irq for gpio\n");
-
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
- virtual_gpio_init();
-#endif
-
- return res;
-}
-
-/* this makes sure that gpio_init is called during kernel boot */
-
-module_init(gpio_init);
diff --git a/arch/cris/arch-v32/kernel/crisksyms.c b/arch/cris/arch-v32/kernel/crisksyms.c
index bde8d1a10cad..b0566350a840 100644
--- a/arch/cris/arch-v32/kernel/crisksyms.c
+++ b/arch/cris/arch-v32/kernel/crisksyms.c
@@ -3,7 +3,6 @@
#include <arch/dma.h>
#include <arch/intmem.h>
#include <mach/pinmux.h>
-#include <arch/io.h>
/* Functions for allocating DMA channels */
EXPORT_SYMBOL(crisv32_request_dma);
@@ -20,8 +19,6 @@ EXPORT_SYMBOL(crisv32_pinmux_alloc);
EXPORT_SYMBOL(crisv32_pinmux_alloc_fixed);
EXPORT_SYMBOL(crisv32_pinmux_dealloc);
EXPORT_SYMBOL(crisv32_pinmux_dealloc_fixed);
-EXPORT_SYMBOL(crisv32_io_get_name);
-EXPORT_SYMBOL(crisv32_io_get);
/* Functions masking/unmasking interrupts */
EXPORT_SYMBOL(crisv32_mask_irq);
diff --git a/arch/cris/arch-v32/mach-a3/Makefile b/arch/cris/arch-v32/mach-a3/Makefile
index 18a227196a41..0cc6eebacbed 100644
--- a/arch/cris/arch-v32/mach-a3/Makefile
+++ b/arch/cris/arch-v32/mach-a3/Makefile
@@ -2,7 +2,7 @@
# Makefile for the linux kernel.
#
-obj-y := dma.o pinmux.o io.o arbiter.o
+obj-y := dma.o pinmux.o arbiter.o
clean:
diff --git a/arch/cris/arch-v32/mach-a3/io.c b/arch/cris/arch-v32/mach-a3/io.c
deleted file mode 100644
index 090ceb99ef0b..000000000000
--- a/arch/cris/arch-v32/mach-a3/io.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * Helper functions for I/O pins.
- *
- * Copyright (c) 2005-2007 Axis Communications AB.
- */
-
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/ctype.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <asm/io.h>
-#include <mach/pinmux.h>
-#include <hwregs/gio_defs.h>
-
-struct crisv32_ioport crisv32_ioports[] = {
- {
- (unsigned long *)REG_ADDR(gio, regi_gio, rw_pa_oe),
- (unsigned long *)REG_ADDR(gio, regi_gio, rw_pa_dout),
- (unsigned long *)REG_ADDR(gio, regi_gio, r_pa_din),
- 32
- },
- {
- (unsigned long *)REG_ADDR(gio, regi_gio, rw_pb_oe),
- (unsigned long *)REG_ADDR(gio, regi_gio, rw_pb_dout),
- (unsigned long *)REG_ADDR(gio, regi_gio, r_pb_din),
- 32
- },
- {
- (unsigned long *)REG_ADDR(gio, regi_gio, rw_pc_oe),
- (unsigned long *)REG_ADDR(gio, regi_gio, rw_pc_dout),
- (unsigned long *)REG_ADDR(gio, regi_gio, r_pc_din),
- 16
- },
-};
-
-#define NBR_OF_PORTS ARRAY_SIZE(crisv32_ioports)
-
-struct crisv32_iopin crisv32_led_net0_green;
-struct crisv32_iopin crisv32_led_net0_red;
-struct crisv32_iopin crisv32_led2_green;
-struct crisv32_iopin crisv32_led2_red;
-struct crisv32_iopin crisv32_led3_green;
-struct crisv32_iopin crisv32_led3_red;
-
-/* Dummy port used when green LED and red LED is on the same bit */
-static unsigned long io_dummy;
-static struct crisv32_ioport dummy_port = {
- &io_dummy,
- &io_dummy,
- &io_dummy,
- 32
-};
-static struct crisv32_iopin dummy_led = {
- &dummy_port,
- 0
-};
-
-static int __init crisv32_io_init(void)
-{
- int ret = 0;
-
- u32 i;
-
- /* Locks *should* be dynamically initialized. */
- for (i = 0; i < ARRAY_SIZE(crisv32_ioports); i++)
- spin_lock_init(&crisv32_ioports[i].lock);
- spin_lock_init(&dummy_port.lock);
-
- /* Initialize LEDs */
-#if (defined(CONFIG_ETRAX_NBR_LED_GRP_ONE) || defined(CONFIG_ETRAX_NBR_LED_GRP_TWO))
- ret += crisv32_io_get_name(&crisv32_led_net0_green,
- CONFIG_ETRAX_LED_G_NET0);
- crisv32_io_set_dir(&crisv32_led_net0_green, crisv32_io_dir_out);
- if (strcmp(CONFIG_ETRAX_LED_G_NET0, CONFIG_ETRAX_LED_R_NET0)) {
- ret += crisv32_io_get_name(&crisv32_led_net0_red,
- CONFIG_ETRAX_LED_R_NET0);
- crisv32_io_set_dir(&crisv32_led_net0_red, crisv32_io_dir_out);
- } else
- crisv32_led_net0_red = dummy_led;
-#endif
-
- ret += crisv32_io_get_name(&crisv32_led2_green, CONFIG_ETRAX_V32_LED2G);
- ret += crisv32_io_get_name(&crisv32_led2_red, CONFIG_ETRAX_V32_LED2R);
- ret += crisv32_io_get_name(&crisv32_led3_green, CONFIG_ETRAX_V32_LED3G);
- ret += crisv32_io_get_name(&crisv32_led3_red, CONFIG_ETRAX_V32_LED3R);
-
- crisv32_io_set_dir(&crisv32_led2_green, crisv32_io_dir_out);
- crisv32_io_set_dir(&crisv32_led2_red, crisv32_io_dir_out);
- crisv32_io_set_dir(&crisv32_led3_green, crisv32_io_dir_out);
- crisv32_io_set_dir(&crisv32_led3_red, crisv32_io_dir_out);
-
- return ret;
-}
-
-__initcall(crisv32_io_init);
-
-int crisv32_io_get(struct crisv32_iopin *iopin,
- unsigned int port, unsigned int pin)
-{
- if (port > NBR_OF_PORTS)
- return -EINVAL;
- if (port > crisv32_ioports[port].pin_count)
- return -EINVAL;
-
- iopin->bit = 1 << pin;
- iopin->port = &crisv32_ioports[port];
-
- if (crisv32_pinmux_alloc(port, pin, pin, pinmux_gpio))
- return -EIO;
-
- return 0;
-}
-
-int crisv32_io_get_name(struct crisv32_iopin *iopin, const char *name)
-{
- int port;
- int pin;
-
- if (toupper(*name) == 'P')
- name++;
-
- if (toupper(*name) < 'A' || toupper(*name) > 'E')
- return -EINVAL;
-
- port = toupper(*name) - 'A';
- name++;
- pin = simple_strtoul(name, NULL, 10);
-
- if (pin < 0 || pin > crisv32_ioports[port].pin_count)
- return -EINVAL;
-
- iopin->bit = 1 << pin;
- iopin->port = &crisv32_ioports[port];
-
- if (crisv32_pinmux_alloc(port, pin, pin, pinmux_gpio))
- return -EIO;
-
- return 0;
-}
-
-#ifdef CONFIG_PCI
-/* PCI I/O access stuff */
-struct cris_io_operations *cris_iops = NULL;
-EXPORT_SYMBOL(cris_iops);
-#endif
-
diff --git a/arch/cris/arch-v32/mach-fs/Makefile b/arch/cris/arch-v32/mach-fs/Makefile
index 18a227196a41..0cc6eebacbed 100644
--- a/arch/cris/arch-v32/mach-fs/Makefile
+++ b/arch/cris/arch-v32/mach-fs/Makefile
@@ -2,7 +2,7 @@
# Makefile for the linux kernel.
#
-obj-y := dma.o pinmux.o io.o arbiter.o
+obj-y := dma.o pinmux.o arbiter.o
clean:
diff --git a/arch/cris/arch-v32/mach-fs/io.c b/arch/cris/arch-v32/mach-fs/io.c
deleted file mode 100644
index a6958661fa8e..000000000000
--- a/arch/cris/arch-v32/mach-fs/io.c
+++ /dev/null
@@ -1,191 +0,0 @@
-/*
- * Helper functions for I/O pins.
- *
- * Copyright (c) 2004-2007 Axis Communications AB.
- */
-
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/ctype.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <asm/io.h>
-#include <mach/pinmux.h>
-#include <hwregs/gio_defs.h>
-
-#ifndef DEBUG
-#define DEBUG(x)
-#endif
-
-struct crisv32_ioport crisv32_ioports[] = {
- {
- (unsigned long *)REG_ADDR(gio, regi_gio, rw_pa_oe),
- (unsigned long *)REG_ADDR(gio, regi_gio, rw_pa_dout),
- (unsigned long *)REG_ADDR(gio, regi_gio, r_pa_din),
- 8
- },
- {
- (unsigned long *)REG_ADDR(gio, regi_gio, rw_pb_oe),
- (unsigned long *)REG_ADDR(gio, regi_gio, rw_pb_dout),
- (unsigned long *)REG_ADDR(gio, regi_gio, r_pb_din),
- 18
- },
- {
- (unsigned long *)REG_ADDR(gio, regi_gio, rw_pc_oe),
- (unsigned long *)REG_ADDR(gio, regi_gio, rw_pc_dout),
- (unsigned long *)REG_ADDR(gio, regi_gio, r_pc_din),
- 18
- },
- {
- (unsigned long *)REG_ADDR(gio, regi_gio, rw_pd_oe),
- (unsigned long *)REG_ADDR(gio, regi_gio, rw_pd_dout),
- (unsigned long *)REG_ADDR(gio, regi_gio, r_pd_din),
- 18
- },
- {
- (unsigned long *)REG_ADDR(gio, regi_gio, rw_pe_oe),
- (unsigned long *)REG_ADDR(gio, regi_gio, rw_pe_dout),
- (unsigned long *)REG_ADDR(gio, regi_gio, r_pe_din),
- 18
- }
-};
-
-#define NBR_OF_PORTS ARRAY_SIZE(crisv32_ioports)
-
-struct crisv32_iopin crisv32_led_net0_green;
-struct crisv32_iopin crisv32_led_net0_red;
-struct crisv32_iopin crisv32_led_net1_green;
-struct crisv32_iopin crisv32_led_net1_red;
-struct crisv32_iopin crisv32_led2_green;
-struct crisv32_iopin crisv32_led2_red;
-struct crisv32_iopin crisv32_led3_green;
-struct crisv32_iopin crisv32_led3_red;
-
-/* Dummy port used when green LED and red LED is on the same bit */
-static unsigned long io_dummy;
-static struct crisv32_ioport dummy_port = {
- &io_dummy,
- &io_dummy,
- &io_dummy,
- 18
-};
-static struct crisv32_iopin dummy_led = {
- &dummy_port,
- 0
-};
-
-static int __init crisv32_io_init(void)
-{
- int ret = 0;
-
- u32 i;
-
- /* Locks *should* be dynamically initialized. */
- for (i = 0; i < ARRAY_SIZE(crisv32_ioports); i++)
- spin_lock_init(&crisv32_ioports[i].lock);
- spin_lock_init(&dummy_port.lock);
-
- /* Initialize LEDs */
-#if (defined(CONFIG_ETRAX_NBR_LED_GRP_ONE) || defined(CONFIG_ETRAX_NBR_LED_GRP_TWO))
- ret +=
- crisv32_io_get_name(&crisv32_led_net0_green,
- CONFIG_ETRAX_LED_G_NET0);
- crisv32_io_set_dir(&crisv32_led_net0_green, crisv32_io_dir_out);
- if (strcmp(CONFIG_ETRAX_LED_G_NET0, CONFIG_ETRAX_LED_R_NET0)) {
- ret +=
- crisv32_io_get_name(&crisv32_led_net0_red,
- CONFIG_ETRAX_LED_R_NET0);
- crisv32_io_set_dir(&crisv32_led_net0_red, crisv32_io_dir_out);
- } else
- crisv32_led_net0_red = dummy_led;
-#endif
-
-#ifdef CONFIG_ETRAX_NBR_LED_GRP_TWO
- ret +=
- crisv32_io_get_name(&crisv32_led_net1_green,
- CONFIG_ETRAX_LED_G_NET1);
- crisv32_io_set_dir(&crisv32_led_net1_green, crisv32_io_dir_out);
- if (strcmp(CONFIG_ETRAX_LED_G_NET1, CONFIG_ETRAX_LED_R_NET1)) {
- crisv32_io_get_name(&crisv32_led_net1_red,
- CONFIG_ETRAX_LED_R_NET1);
- crisv32_io_set_dir(&crisv32_led_net1_red, crisv32_io_dir_out);
- } else
- crisv32_led_net1_red = dummy_led;
-#endif
-
- ret += crisv32_io_get_name(&crisv32_led2_green, CONFIG_ETRAX_V32_LED2G);
- ret += crisv32_io_get_name(&crisv32_led2_red, CONFIG_ETRAX_V32_LED2R);
- ret += crisv32_io_get_name(&crisv32_led3_green, CONFIG_ETRAX_V32_LED3G);
- ret += crisv32_io_get_name(&crisv32_led3_red, CONFIG_ETRAX_V32_LED3R);
-
- crisv32_io_set_dir(&crisv32_led2_green, crisv32_io_dir_out);
- crisv32_io_set_dir(&crisv32_led2_red, crisv32_io_dir_out);
- crisv32_io_set_dir(&crisv32_led3_green, crisv32_io_dir_out);
- crisv32_io_set_dir(&crisv32_led3_red, crisv32_io_dir_out);
-
- return ret;
-}
-
-__initcall(crisv32_io_init);
-
-int crisv32_io_get(struct crisv32_iopin *iopin,
- unsigned int port, unsigned int pin)
-{
- if (port > NBR_OF_PORTS)
- return -EINVAL;
- if (port > crisv32_ioports[port].pin_count)
- return -EINVAL;
-
- iopin->bit = 1 << pin;
- iopin->port = &crisv32_ioports[port];
-
- /* Only allocate pinmux gpiopins if port != PORT_A (port 0) */
- /* NOTE! crisv32_pinmux_alloc thinks PORT_B is port 0 */
- if (port != 0 && crisv32_pinmux_alloc(port - 1, pin, pin, pinmux_gpio))
- return -EIO;
- DEBUG(printk(KERN_DEBUG "crisv32_io_get: Allocated pin %d on port %d\n",
- pin, port));
-
- return 0;
-}
-
-int crisv32_io_get_name(struct crisv32_iopin *iopin, const char *name)
-{
- int port;
- int pin;
-
- if (toupper(*name) == 'P')
- name++;
-
- if (toupper(*name) < 'A' || toupper(*name) > 'E')
- return -EINVAL;
-
- port = toupper(*name) - 'A';
- name++;
- pin = simple_strtoul(name, NULL, 10);
-
- if (pin < 0 || pin > crisv32_ioports[port].pin_count)
- return -EINVAL;
-
- iopin->bit = 1 << pin;
- iopin->port = &crisv32_ioports[port];
-
- /* Only allocate pinmux gpiopins if port != PORT_A (port 0) */
- /* NOTE! crisv32_pinmux_alloc thinks PORT_B is port 0 */
- if (port != 0 && crisv32_pinmux_alloc(port - 1, pin, pin, pinmux_gpio))
- return -EIO;
-
- DEBUG(printk(KERN_DEBUG
- "crisv32_io_get_name: Allocated pin %d on port %d\n",
- pin, port));
-
- return 0;
-}
-
-#ifdef CONFIG_PCI
-/* PCI I/O access stuff */
-struct cris_io_operations *cris_iops = NULL;
-EXPORT_SYMBOL(cris_iops);
-#endif
diff --git a/arch/cris/include/arch-v32/arch/io.h b/arch/cris/include/arch-v32/arch/io.h
deleted file mode 100644
index adc5484351bf..000000000000
--- a/arch/cris/include/arch-v32/arch/io.h
+++ /dev/null
@@ -1,140 +0,0 @@
-#ifndef _ASM_ARCH_CRIS_IO_H
-#define _ASM_ARCH_CRIS_IO_H
-
-#include <linux/spinlock.h>
-#include <hwregs/reg_map.h>
-#include <hwregs/reg_rdwr.h>
-#include <hwregs/gio_defs.h>
-
-enum crisv32_io_dir
-{
- crisv32_io_dir_in = 0,
- crisv32_io_dir_out = 1
-};
-
-struct crisv32_ioport
-{
- volatile unsigned long *oe;
- volatile unsigned long *data;
- volatile unsigned long *data_in;
- unsigned int pin_count;
- spinlock_t lock;
-};
-
-struct crisv32_iopin
-{
- struct crisv32_ioport* port;
- int bit;
-};
-
-extern struct crisv32_ioport crisv32_ioports[];
-
-extern struct crisv32_iopin crisv32_led1_green;
-extern struct crisv32_iopin crisv32_led1_red;
-extern struct crisv32_iopin crisv32_led2_green;
-extern struct crisv32_iopin crisv32_led2_red;
-extern struct crisv32_iopin crisv32_led3_green;
-extern struct crisv32_iopin crisv32_led3_red;
-
-extern struct crisv32_iopin crisv32_led_net0_green;
-extern struct crisv32_iopin crisv32_led_net0_red;
-extern struct crisv32_iopin crisv32_led_net1_green;
-extern struct crisv32_iopin crisv32_led_net1_red;
-
-static inline void crisv32_io_set(struct crisv32_iopin *iopin, int val)
-{
- unsigned long flags;
- spin_lock_irqsave(&iopin->port->lock, flags);
-
- if (iopin->port->data) {
- if (val)
- *iopin->port->data |= iopin->bit;
- else
- *iopin->port->data &= ~iopin->bit;
- }
-
- spin_unlock_irqrestore(&iopin->port->lock, flags);
-}
-
-static inline void crisv32_io_set_dir(struct crisv32_iopin* iopin,
- enum crisv32_io_dir dir)
-{
- unsigned long flags;
- spin_lock_irqsave(&iopin->port->lock, flags);
-
- if (iopin->port->oe) {
- if (dir == crisv32_io_dir_in)
- *iopin->port->oe &= ~iopin->bit;
- else
- *iopin->port->oe |= iopin->bit;
- }
-
- spin_unlock_irqrestore(&iopin->port->lock, flags);
-}
-
-static inline int crisv32_io_rd(struct crisv32_iopin* iopin)
-{
- return ((*iopin->port->data_in & iopin->bit) ? 1 : 0);
-}
-
-int crisv32_io_get(struct crisv32_iopin* iopin,
- unsigned int port, unsigned int pin);
-int crisv32_io_get_name(struct crisv32_iopin* iopin,
- const char *name);
-
-#define CRIS_LED_OFF 0x00
-#define CRIS_LED_GREEN 0x01
-#define CRIS_LED_RED 0x02
-#define CRIS_LED_ORANGE (CRIS_LED_GREEN | CRIS_LED_RED)
-
-#if (defined(CONFIG_ETRAX_NBR_LED_GRP_ONE) || defined(CONFIG_ETRAX_NBR_LED_GRP_TWO))
-#define CRIS_LED_NETWORK_GRP0_SET(x) \
- do { \
- CRIS_LED_NETWORK_GRP0_SET_G((x) & CRIS_LED_GREEN); \
- CRIS_LED_NETWORK_GRP0_SET_R((x) & CRIS_LED_RED); \
- } while (0)
-#else
-#define CRIS_LED_NETWORK_GRP0_SET(x) while (0) {}
-#endif
-
-#define CRIS_LED_NETWORK_GRP0_SET_G(x) \
- crisv32_io_set(&crisv32_led_net0_green, !(x));
-
-#define CRIS_LED_NETWORK_GRP0_SET_R(x) \
- crisv32_io_set(&crisv32_led_net0_red, !(x));
-
-#if defined(CONFIG_ETRAX_NBR_LED_GRP_TWO)
-#define CRIS_LED_NETWORK_GRP1_SET(x) \
- do { \
- CRIS_LED_NETWORK_GRP1_SET_G((x) & CRIS_LED_GREEN); \
- CRIS_LED_NETWORK_GRP1_SET_R((x) & CRIS_LED_RED); \
- } while (0)
-#else
-#define CRIS_LED_NETWORK_GRP1_SET(x) while (0) {}
-#endif
-
-#define CRIS_LED_NETWORK_GRP1_SET_G(x) \
- crisv32_io_set(&crisv32_led_net1_green, !(x));
-
-#define CRIS_LED_NETWORK_GRP1_SET_R(x) \
- crisv32_io_set(&crisv32_led_net1_red, !(x));
-
-#define CRIS_LED_ACTIVE_SET(x) \
- do { \
- CRIS_LED_ACTIVE_SET_G((x) & CRIS_LED_GREEN); \
- CRIS_LED_ACTIVE_SET_R((x) & CRIS_LED_RED); \
- } while (0)
-
-#define CRIS_LED_ACTIVE_SET_G(x) \
- crisv32_io_set(&crisv32_led2_green, !(x));
-#define CRIS_LED_ACTIVE_SET_R(x) \
- crisv32_io_set(&crisv32_led2_red, !(x));
-#define CRIS_LED_DISK_WRITE(x) \
- do{\
- crisv32_io_set(&crisv32_led3_green, !(x)); \
- crisv32_io_set(&crisv32_led3_red, !(x)); \
- }while(0)
-#define CRIS_LED_DISK_READ(x) \
- crisv32_io_set(&crisv32_led3_green, !(x));
-
-#endif
diff --git a/arch/cris/include/asm/io.h b/arch/cris/include/asm/io.h
index 752a3f45df60..cce8664d5dd6 100644
--- a/arch/cris/include/asm/io.h
+++ b/arch/cris/include/asm/io.h
@@ -2,7 +2,9 @@
#define _ASM_CRIS_IO_H
#include <asm/page.h> /* for __va, __pa */
+#ifdef CONFIG_ETRAX_ARCH_V10
#include <arch/io.h>
+#endif
#include <asm-generic/iomap.h>
#include <linux/kernel.h>