summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--CREDITS5
-rw-r--r--Documentation/Changes11
-rw-r--r--Documentation/DocBook/device-drivers.tmpl2
-rw-r--r--Documentation/DocBook/media/v4l/vidioc-expbuf.xml8
-rw-r--r--Documentation/assoc_array.txt6
-rw-r--r--Documentation/device-mapper/cache.txt10
-rw-r--r--Documentation/devicetree/bindings/arm/omap/mpu.txt8
-rw-r--r--Documentation/devicetree/bindings/arm/pmu.txt1
-rw-r--r--Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt2
-rw-r--r--Documentation/devicetree/bindings/clock/exynos4-clock.txt2
-rw-r--r--Documentation/devicetree/bindings/clock/exynos5250-clock.txt2
-rw-r--r--Documentation/devicetree/bindings/clock/exynos5420-clock.txt2
-rw-r--r--Documentation/devicetree/bindings/clock/exynos5440-clock.txt2
-rw-r--r--Documentation/devicetree/bindings/gpio/8xxx_gpio.txt66
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-omap.txt3
-rw-r--r--Documentation/devicetree/bindings/mmc/ti-omap.txt54
-rw-r--r--Documentation/devicetree/bindings/net/davinci_emac.txt2
-rw-r--r--Documentation/devicetree/bindings/net/fsl-fec.txt2
-rw-r--r--Documentation/devicetree/bindings/net/smsc-lan91c111.txt4
-rw-r--r--Documentation/devicetree/bindings/rng/qcom,prng.txt17
-rw-r--r--Documentation/devicetree/bindings/spi/nvidia,tegra20-spi.txt5
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.txt2
-rw-r--r--Documentation/gpio/00-INDEX14
-rw-r--r--Documentation/gpio/board.txt115
-rw-r--r--Documentation/gpio/consumer.txt197
-rw-r--r--Documentation/gpio/driver.txt75
-rw-r--r--Documentation/gpio/gpio-legacy.txt (renamed from Documentation/gpio.txt)0
-rw-r--r--Documentation/gpio/gpio.txt119
-rw-r--r--Documentation/gpio/sysfs.txt155
-rw-r--r--Documentation/mic/mpssd/mpssd.c18
-rw-r--r--Documentation/networking/packet_mmap.txt10
-rw-r--r--MAINTAINERS80
-rw-r--r--Makefile2
-rw-r--r--arch/arc/Kconfig1
-rw-r--r--arch/arc/include/uapi/asm/unistd.h5
-rw-r--r--arch/arc/kernel/perf_event.c4
-rw-r--r--arch/arm/boot/dts/am335x-base0033.dts79
-rw-r--r--arch/arm/boot/dts/am335x-igep0033.dtsi29
-rw-r--r--arch/arm/boot/dts/am3517-evm.dts6
-rw-r--r--arch/arm/boot/dts/am3517.dtsi63
-rw-r--r--arch/arm/boot/dts/armada-370-db.dts28
-rw-r--r--arch/arm/boot/dts/armada-370-xp.dtsi2
-rw-r--r--arch/arm/boot/dts/armada-xp-mv78230.dtsi24
-rw-r--r--arch/arm/boot/dts/armada-xp-mv78260.dtsi109
-rw-r--r--arch/arm/boot/dts/at91sam9x5_usart3.dtsi4
-rw-r--r--arch/arm/boot/dts/bcm2835.dtsi4
-rw-r--r--arch/arm/boot/dts/cros5250-common.dtsi12
-rw-r--r--arch/arm/boot/dts/imx6qdl.dtsi2
-rw-r--r--arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi4
-rw-r--r--arch/arm/boot/dts/omap-zoom-common.dtsi2
-rw-r--r--arch/arm/boot/dts/omap2.dtsi96
-rw-r--r--arch/arm/boot/dts/omap2420.dtsi23
-rw-r--r--arch/arm/boot/dts/omap2430.dtsi49
-rw-r--r--arch/arm/boot/dts/omap3-beagle-xm.dts7
-rw-r--r--arch/arm/boot/dts/omap3-beagle.dts21
-rw-r--r--arch/arm/boot/dts/omap3-igep.dtsi85
-rw-r--r--arch/arm/boot/dts/omap3-igep0020.dts50
-rw-r--r--arch/arm/boot/dts/omap3-igep0030.dts4
-rw-r--r--arch/arm/boot/dts/omap3-n900.dts25
-rw-r--r--arch/arm/boot/dts/omap3-n950-n9.dtsi2
-rw-r--r--arch/arm/boot/dts/omap3.dtsi42
-rw-r--r--arch/arm/boot/dts/omap34xx-hs.dtsi16
-rw-r--r--arch/arm/boot/dts/omap36xx-hs.dtsi16
-rw-r--r--arch/arm/boot/dts/omap4-panda-common.dtsi20
-rw-r--r--arch/arm/boot/dts/omap4-sdp.dts12
-rw-r--r--arch/arm/boot/dts/socfpga.dtsi7
-rw-r--r--arch/arm/boot/dts/sun6i-a31.dtsi27
-rw-r--r--arch/arm/boot/dts/sun7i-a20.dtsi42
-rw-r--r--arch/arm/configs/multi_v7_defconfig3
-rw-r--r--arch/arm/configs/omap2plus_defconfig1
-rw-r--r--arch/arm/configs/sunxi_defconfig7
-rw-r--r--arch/arm/configs/u8500_defconfig3
-rw-r--r--arch/arm/include/asm/memory.h31
-rw-r--r--arch/arm/include/asm/pgtable.h2
-rw-r--r--arch/arm/kernel/head-nommu.S4
-rw-r--r--arch/arm/kernel/head.S2
-rw-r--r--arch/arm/kernel/machine_kexec.c17
-rw-r--r--arch/arm/kernel/process.c7
-rw-r--r--arch/arm/kernel/relocate_kernel.S8
-rw-r--r--arch/arm/kernel/setup.c3
-rw-r--r--arch/arm/kernel/sigreturn_codes.S40
-rw-r--r--arch/arm/kernel/stacktrace.c2
-rw-r--r--arch/arm/kernel/traps.c3
-rw-r--r--arch/arm/lib/delay-loop.S1
-rw-r--r--arch/arm/mach-at91/at91rm9200_time.c7
-rw-r--r--arch/arm/mach-at91/pm.h4
-rw-r--r--arch/arm/mach-at91/sama5d3.c6
-rw-r--r--arch/arm/mach-davinci/devices-da8xx.c4
-rw-r--r--arch/arm/mach-davinci/dm355.c3
-rw-r--r--arch/arm/mach-davinci/dm365.c3
-rw-r--r--arch/arm/mach-davinci/dm644x.c3
-rw-r--r--arch/arm/mach-davinci/dm646x.c6
-rw-r--r--arch/arm/mach-footbridge/common.c3
-rw-r--r--arch/arm/mach-footbridge/dc21285.c2
-rw-r--r--arch/arm/mach-footbridge/ebsa285.c22
-rw-r--r--arch/arm/mach-highbank/highbank.c23
-rw-r--r--arch/arm/mach-omap2/Makefile6
-rw-r--r--arch/arm/mach-omap2/board-generic.c18
-rw-r--r--arch/arm/mach-omap2/common.h1
-rw-r--r--arch/arm/mach-omap2/display.c78
-rw-r--r--arch/arm/mach-omap2/dss-common.c2
-rw-r--r--arch/arm/mach-omap2/gpmc.c58
-rw-r--r--arch/arm/mach-omap2/omap-secure.h7
-rw-r--r--arch/arm/mach-omap2/omap4-common.c57
-rw-r--r--arch/arm/mach-omap2/omap_device.c24
-rw-r--r--arch/arm/mach-omap2/omap_device.h1
-rw-r--r--arch/arm/mach-omap2/omap_hwmod.c143
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_3xxx_data.c13
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_44xx_data.c12
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_54xx_data.c13
-rw-r--r--arch/arm/mach-omap2/pdata-quirks.c1
-rw-r--r--arch/arm/mach-omap2/pm34xx.c2
-rw-r--r--arch/arm/mach-omap2/powerdomain.c3
-rw-r--r--arch/arm/mach-omap2/prm44xx_54xx.h2
-rw-r--r--arch/arm/mach-pxa/reset.c8
-rw-r--r--arch/arm/mach-pxa/tosa.c102
-rw-r--r--arch/arm/mach-socfpga/Kconfig1
-rw-r--r--arch/arm/mach-tegra/fuse.c12
-rw-r--r--arch/arm/mach-ux500/cpu-db8500.c4
-rw-r--r--arch/arm/mach-vexpress/spc.c40
-rw-r--r--arch/arm/mach-vexpress/spc.h1
-rw-r--r--arch/arm/mach-vexpress/tc2_pm.c66
-rw-r--r--arch/arm/mm/dma-mapping.c88
-rw-r--r--arch/arm/mm/init.c2
-rw-r--r--arch/arm/mm/mmap.c2
-rw-r--r--arch/arm/mm/pgd.c3
-rw-r--r--arch/arm/plat-omap/include/plat/dmtimer.h5
-rw-r--r--arch/arm/xen/p2m.c5
-rw-r--r--arch/arm64/Kconfig3
-rw-r--r--arch/arm64/boot/dts/foundation-v8.dts2
-rw-r--r--arch/arm64/include/asm/io.h2
-rw-r--r--arch/arm64/include/asm/irqflags.h3
-rw-r--r--arch/arm64/include/asm/pgtable-hwdef.h2
-rw-r--r--arch/arm64/include/asm/pgtable.h33
-rw-r--r--arch/arm64/kernel/debug-monitors.c20
-rw-r--r--arch/arm64/kernel/entry.S29
-rw-r--r--arch/arm64/kernel/head.S3
-rw-r--r--arch/arm64/kernel/ptrace.c40
-rw-r--r--arch/arm64/kernel/setup.c5
-rw-r--r--arch/arm64/kernel/smp.c1
-rw-r--r--arch/arm64/mm/proc.S2
-rw-r--r--arch/avr32/boards/favr-32/setup.c4
-rw-r--r--arch/avr32/configs/atngw100_defconfig1
-rw-r--r--arch/avr32/configs/atngw100_evklcd100_defconfig1
-rw-r--r--arch/avr32/configs/atngw100_evklcd101_defconfig1
-rw-r--r--arch/avr32/configs/atngw100_mrmt_defconfig1
-rw-r--r--arch/avr32/configs/atngw100mkii_defconfig1
-rw-r--r--arch/avr32/configs/atngw100mkii_evklcd100_defconfig1
-rw-r--r--arch/avr32/configs/atngw100mkii_evklcd101_defconfig1
-rw-r--r--arch/avr32/configs/atstk1002_defconfig1
-rw-r--r--arch/avr32/configs/atstk1003_defconfig1
-rw-r--r--arch/avr32/configs/atstk1004_defconfig1
-rw-r--r--arch/avr32/configs/atstk1006_defconfig1
-rw-r--r--arch/avr32/configs/favr-32_defconfig1
-rw-r--r--arch/avr32/configs/hammerhead_defconfig1
-rw-r--r--arch/avr32/configs/merisc_defconfig1
-rw-r--r--arch/avr32/configs/mimc200_defconfig1
-rw-r--r--arch/avr32/kernel/time.c2
-rw-r--r--arch/avr32/mach-at32ap/pm.c2
-rw-r--r--arch/parisc/configs/c3000_defconfig2
-rw-r--r--arch/parisc/configs/c8000_defconfig36
-rw-r--r--arch/parisc/configs/generic-64bit_defconfig39
-rw-r--r--arch/parisc/include/asm/serial.h2
-rw-r--r--arch/parisc/kernel/hardware.c7
-rw-r--r--arch/parisc/kernel/head.S6
-rw-r--r--arch/parisc/kernel/sys_parisc.c25
-rw-r--r--arch/parisc/kernel/unwind.c9
-rw-r--r--arch/parisc/kernel/vmlinux.lds.S138
-rw-r--r--arch/parisc/mm/init.c19
-rw-r--r--arch/powerpc/Makefile7
-rw-r--r--arch/powerpc/boot/dts/mpc5121.dtsi1
-rw-r--r--arch/powerpc/boot/dts/xcalibur1501.dts4
-rw-r--r--arch/powerpc/boot/dts/xpedite5301.dts4
-rw-r--r--arch/powerpc/boot/dts/xpedite5330.dts4
-rw-r--r--arch/powerpc/boot/dts/xpedite5370.dts4
-rw-r--r--arch/powerpc/boot/util.S14
-rw-r--r--arch/powerpc/configs/52xx/cm5200_defconfig3
-rw-r--r--arch/powerpc/configs/52xx/lite5200b_defconfig3
-rw-r--r--arch/powerpc/configs/52xx/motionpro_defconfig3
-rw-r--r--arch/powerpc/configs/52xx/pcm030_defconfig3
-rw-r--r--arch/powerpc/configs/52xx/tqm5200_defconfig3
-rw-r--r--arch/powerpc/configs/mpc5200_defconfig3
-rw-r--r--arch/powerpc/configs/pasemi_defconfig7
-rw-r--r--arch/powerpc/include/asm/pgalloc-32.h6
-rw-r--r--arch/powerpc/include/asm/pgalloc-64.h7
-rw-r--r--arch/powerpc/include/asm/ppc_asm.h2
-rw-r--r--arch/powerpc/include/asm/reg.h7
-rw-r--r--arch/powerpc/include/asm/timex.h8
-rw-r--r--arch/powerpc/kernel/machine_kexec.c14
-rw-r--r--arch/powerpc/kernel/misc_64.S5
-rw-r--r--arch/powerpc/kernel/nvram_64.c2
-rw-r--r--arch/powerpc/kernel/signal_32.c16
-rw-r--r--arch/powerpc/kernel/signal_64.c6
-rw-r--r--arch/powerpc/kernel/vdso32/gettimeofday.S6
-rw-r--r--arch/powerpc/mm/hugetlbpage-book3e.c3
-rw-r--r--arch/powerpc/mm/tlb_nohash.c2
-rw-r--r--arch/powerpc/platforms/Kconfig.cputype20
-rw-r--r--arch/powerpc/platforms/powernv/pci-ioda.c1
-rw-r--r--arch/powerpc/sysdev/ppc4xx_ocm.c2
-rw-r--r--arch/s390/Kconfig8
-rw-r--r--arch/s390/crypto/aes_s390.c50
-rw-r--r--arch/s390/include/asm/page.h38
-rw-r--r--arch/s390/include/asm/sclp.h3
-rw-r--r--arch/s390/include/asm/vdso.h5
-rw-r--r--arch/s390/kernel/asm-offsets.c4
-rw-r--r--arch/s390/kernel/compat_signal.c2
-rw-r--r--arch/s390/kernel/pgm_check.S2
-rw-r--r--arch/s390/kernel/signal.c2
-rw-r--r--arch/s390/kernel/time.c46
-rw-r--r--arch/s390/kernel/vdso.c2
-rw-r--r--arch/s390/kernel/vdso32/clock_gettime.S31
-rw-r--r--arch/s390/kernel/vdso32/gettimeofday.S9
-rw-r--r--arch/s390/kernel/vdso64/clock_getres.S4
-rw-r--r--arch/s390/kernel/vdso64/clock_gettime.S24
-rw-r--r--arch/s390/kernel/vdso64/gettimeofday.S9
-rw-r--r--arch/s390/lib/uaccess_pt.c3
-rw-r--r--arch/um/Makefile9
-rw-r--r--arch/um/kernel/sysrq.c4
-rw-r--r--arch/x86/Makefile8
-rw-r--r--arch/x86/boot/Makefile6
-rw-r--r--arch/x86/boot/compressed/Makefile1
-rw-r--r--arch/x86/crypto/Makefile3
-rw-r--r--arch/x86/crypto/aesni-intel_glue.c2
-rw-r--r--arch/x86/crypto/camellia_aesni_avx2_glue.c2
-rw-r--r--arch/x86/crypto/camellia_aesni_avx_glue.c2
-rw-r--r--arch/x86/crypto/cast5_avx_glue.c2
-rw-r--r--arch/x86/crypto/cast6_avx_glue.c2
-rw-r--r--arch/x86/crypto/serpent_avx2_glue.c2
-rw-r--r--arch/x86/crypto/serpent_avx_glue.c2
-rw-r--r--arch/x86/crypto/serpent_sse2_glue.c2
-rw-r--r--arch/x86/crypto/sha256_ssse3_glue.c4
-rw-r--r--arch/x86/crypto/twofish_avx_glue.c2
-rw-r--r--arch/x86/include/asm/atomic.h4
-rw-r--r--arch/x86/include/asm/atomic64_64.h4
-rw-r--r--arch/x86/include/asm/bitops.h6
-rw-r--r--arch/x86/include/asm/local.h4
-rw-r--r--arch/x86/include/asm/rmwcc.h8
-rw-r--r--arch/x86/include/asm/simd.h11
-rw-r--r--arch/x86/include/asm/trace/irq_vectors.h11
-rw-r--r--arch/x86/kernel/reboot.c11
-rw-r--r--arch/x86/kvm/lapic.c35
-rw-r--r--arch/x86/kvm/lapic.h4
-rw-r--r--arch/x86/kvm/x86.c40
-rw-r--r--arch/x86/platform/efi/early_printk.c2
-rw-r--r--arch/x86/platform/efi/efi.c7
-rw-r--r--arch/x86/platform/uv/tlb_uv.c5
-rw-r--r--arch/x86/realmode/rm/Makefile3
-rw-r--r--block/blk-cgroup.h8
-rw-r--r--block/blk-flush.c19
-rw-r--r--block/blk-mq.c16
-rw-r--r--crypto/Kconfig23
-rw-r--r--crypto/Makefile8
-rw-r--r--crypto/ablk_helper.c (renamed from arch/x86/crypto/ablk_helper.c)13
-rw-r--r--crypto/ablkcipher.c21
-rw-r--r--crypto/algif_hash.c3
-rw-r--r--crypto/algif_skcipher.c3
-rw-r--r--crypto/ansi_cprng.c4
-rw-r--r--crypto/asymmetric_keys/rsa.c5
-rw-r--r--crypto/asymmetric_keys/x509_public_key.c81
-rw-r--r--crypto/authenc.c61
-rw-r--r--crypto/authencesn.c34
-rw-r--r--crypto/ccm.c7
-rw-r--r--crypto/gcm.c2
-rw-r--r--crypto/memneq.c138
-rw-r--r--crypto/tcrypt.c4
-rw-r--r--crypto/testmgr.c26
-rw-r--r--drivers/acpi/acpica/acresrc.h6
-rw-r--r--drivers/acpi/acpica/nsalloc.c18
-rw-r--r--drivers/acpi/acpica/nsutils.c18
-rw-r--r--drivers/acpi/acpica/rscalc.c9
-rw-r--r--drivers/acpi/acpica/rscreate.c36
-rw-r--r--drivers/acpi/acpica/rsutils.c2
-rw-r--r--drivers/acpi/acpica/utdebug.c31
-rw-r--r--drivers/acpi/nvs.c1
-rw-r--r--drivers/acpi/pci_root.c3
-rw-r--r--drivers/acpi/scan.c2
-rw-r--r--drivers/acpi/sleep.c2
-rw-r--r--drivers/acpi/sysfs.c54
-rw-r--r--drivers/ata/ahci.c2
-rw-r--r--drivers/ata/ahci_platform.c1
-rw-r--r--drivers/ata/libata-core.c3
-rw-r--r--drivers/ata/libata-scsi.c1
-rw-r--r--drivers/ata/libata-zpodd.c4
-rw-r--r--drivers/ata/pata_arasan_cf.c1
-rw-r--r--drivers/base/regmap/regmap-mmio.c11
-rw-r--r--drivers/base/regmap/regmap.c8
-rw-r--r--drivers/block/null_blk.c8
-rw-r--r--drivers/block/xen-blkfront.c7
-rw-r--r--drivers/char/hw_random/Kconfig25
-rw-r--r--drivers/char/hw_random/Makefile2
-rw-r--r--drivers/char/hw_random/msm-rng.c197
-rw-r--r--drivers/char/hw_random/omap3-rom-rng.c141
-rw-r--r--drivers/char/hw_random/pseries-rng.c5
-rw-r--r--drivers/char/hw_random/via-rng.c2
-rw-r--r--drivers/char/i8k.c7
-rw-r--r--drivers/clocksource/Kconfig1
-rw-r--r--drivers/clocksource/sh_mtu2.c16
-rw-r--r--drivers/clocksource/sh_tmu.c20
-rw-r--r--drivers/cpufreq/at32ap-cpufreq.c2
-rw-r--r--drivers/cpufreq/exynos4210-cpufreq.c1
-rw-r--r--drivers/cpufreq/exynos4x12-cpufreq.c1
-rw-r--r--drivers/cpufreq/exynos5250-cpufreq.c1
-rw-r--r--drivers/cpufreq/tegra-cpufreq.c4
-rw-r--r--drivers/cpuidle/cpuidle.c2
-rw-r--r--drivers/crypto/caam/Kconfig25
-rw-r--r--drivers/crypto/caam/Makefile4
-rw-r--r--drivers/crypto/caam/caamalg.c134
-rw-r--r--drivers/crypto/caam/caamhash.c88
-rw-r--r--drivers/crypto/caam/caamrng.c29
-rw-r--r--drivers/crypto/caam/ctrl.c418
-rw-r--r--drivers/crypto/caam/desc.h17
-rw-r--r--drivers/crypto/caam/intern.h20
-rw-r--r--drivers/crypto/caam/jr.c340
-rw-r--r--drivers/crypto/caam/jr.h5
-rw-r--r--drivers/crypto/caam/regs.h14
-rw-r--r--drivers/crypto/caam/sg_sw_sec4.h34
-rw-r--r--drivers/crypto/dcp.c49
-rw-r--r--drivers/crypto/ixp4xx_crypto.c26
-rw-r--r--drivers/crypto/mv_cesa.c14
-rw-r--r--drivers/crypto/omap-aes.c6
-rw-r--r--drivers/crypto/omap-sham.c1
-rw-r--r--drivers/crypto/picoxcell_crypto.c32
-rw-r--r--drivers/crypto/sahara.c2
-rw-r--r--drivers/crypto/talitos.c103
-rw-r--r--drivers/crypto/tegra-aes.c26
-rw-r--r--drivers/dma/amba-pl08x.c2
-rw-r--r--drivers/dma/mmp_pdma.c1
-rw-r--r--drivers/dma/s3c24xx-dma.c33
-rw-r--r--drivers/dma/sh/rcar-hpbdma.c11
-rw-r--r--drivers/edac/sb_edac.c2
-rw-r--r--drivers/extcon/extcon-arizona.c4
-rw-r--r--drivers/extcon/extcon-class.c3
-rw-r--r--drivers/firewire/sbp2.c1
-rw-r--r--drivers/firmware/efi/efi-pstore.c163
-rw-r--r--drivers/firmware/efi/efivars.c12
-rw-r--r--drivers/firmware/efi/vars.c12
-rw-r--r--drivers/gpio/gpio-bcm-kona.c2
-rw-r--r--drivers/gpio/gpio-davinci.c4
-rw-r--r--drivers/gpio/gpio-mpc8xxx.c8
-rw-r--r--drivers/gpio/gpio-msm-v2.c2
-rw-r--r--drivers/gpio/gpio-mvebu.c2
-rw-r--r--drivers/gpio/gpio-pl061.c10
-rw-r--r--drivers/gpio/gpio-rcar.c2
-rw-r--r--drivers/gpio/gpio-tb10x.c1
-rw-r--r--drivers/gpio/gpio-twl4030.c13
-rw-r--r--drivers/gpio/gpio-ucb1400.c1
-rw-r--r--drivers/gpio/gpiolib.c78
-rw-r--r--drivers/gpu/drm/drm_edid.c4
-rw-r--r--drivers/gpu/drm/drm_sysfs.c2
-rw-r--r--drivers/gpu/drm/exynos/exynos_drm_drv.c35
-rw-r--r--drivers/gpu/drm/exynos/exynos_drm_fimd.c2
-rw-r--r--drivers/gpu/drm/i915/i915_drv.c2
-rw-r--r--drivers/gpu/drm/i915/i915_gem.c7
-rw-r--r--drivers/gpu/drm/i915/i915_gem_dmabuf.c13
-rw-r--r--drivers/gpu/drm/i915/i915_gem_execbuffer.c60
-rw-r--r--drivers/gpu/drm/i915/i915_gem_gtt.c6
-rw-r--r--drivers/gpu/drm/i915/i915_reg.h1
-rw-r--r--drivers/gpu/drm/i915/intel_ddi.c5
-rw-r--r--drivers/gpu/drm/i915/intel_display.c14
-rw-r--r--drivers/gpu/drm/i915/intel_dp.c34
-rw-r--r--drivers/gpu/drm/i915/intel_drv.h2
-rw-r--r--drivers/gpu/drm/i915/intel_pm.c15
-rw-r--r--drivers/gpu/drm/nouveau/Makefile1
-rw-r--r--drivers/gpu/drm/nouveau/core/engine/device/nv50.c4
-rw-r--r--drivers/gpu/drm/nouveau/core/engine/fifo/nv50.c3
-rw-r--r--drivers/gpu/drm/nouveau/core/engine/fifo/nv84.c3
-rw-r--r--drivers/gpu/drm/nouveau/core/engine/software/nv50.c2
-rw-r--r--drivers/gpu/drm/nouveau/core/include/subdev/clock.h4
-rw-r--r--drivers/gpu/drm/nouveau/core/subdev/clock/nv04.c7
-rw-r--r--drivers/gpu/drm/nouveau/core/subdev/clock/nvaa.c445
-rw-r--r--drivers/gpu/drm/nouveau/dispnv04/overlay.c42
-rw-r--r--drivers/gpu/drm/nouveau/nouveau_display.c3
-rw-r--r--drivers/gpu/drm/nouveau/nouveau_hwmon.c1
-rw-r--r--drivers/gpu/drm/nouveau/nv50_display.c2
-rw-r--r--drivers/gpu/drm/qxl/qxl_release.c1
-rw-r--r--drivers/gpu/drm/radeon/atombios_i2c.c15
-rw-r--r--drivers/gpu/drm/radeon/dce6_afmt.c12
-rw-r--r--drivers/gpu/drm/radeon/ni_dpm.c28
-rw-r--r--drivers/gpu/drm/radeon/r600_hdmi.c8
-rw-r--r--drivers/gpu/drm/radeon/radeon.h8
-rw-r--r--drivers/gpu/drm/radeon/radeon_atombios.c2
-rw-r--r--drivers/gpu/drm/radeon/radeon_cs.c4
-rw-r--r--drivers/gpu/drm/radeon/radeon_drv.h3
-rw-r--r--drivers/gpu/drm/radeon/radeon_gart.c16
-rw-r--r--drivers/gpu/drm/radeon/radeon_pm.c55
-rw-r--r--drivers/gpu/drm/radeon/radeon_trace.h33
-rw-r--r--drivers/gpu/drm/radeon/reg_srcs/cayman4
-rw-r--r--drivers/gpu/drm/radeon/reg_srcs/evergreen4
-rw-r--r--drivers/gpu/drm/radeon/si.c11
-rw-r--r--drivers/gpu/drm/tegra/drm.c34
-rw-r--r--drivers/gpu/drm/tegra/drm.h2
-rw-r--r--drivers/gpu/drm/tegra/fb.c2
-rw-r--r--drivers/gpu/drm/tegra/rgb.c11
-rw-r--r--drivers/gpu/drm/udl/udl_gem.c6
-rw-r--r--drivers/gpu/drm/vmwgfx/vmwgfx_buffer.c2
-rw-r--r--drivers/gpu/drm/vmwgfx/vmwgfx_drv.h1
-rw-r--r--drivers/gpu/drm/vmwgfx/vmwgfx_kms.c1
-rw-r--r--drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c4
-rw-r--r--drivers/gpu/drm/vmwgfx/vmwgfx_resource.c118
-rw-r--r--drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c5
-rw-r--r--drivers/gpu/host1x/bus.c5
-rw-r--r--drivers/gpu/host1x/hw/cdma_hw.c4
-rw-r--r--drivers/gpu/host1x/hw/debug_hw.c4
-rw-r--r--drivers/hid/Kconfig1
-rw-r--r--drivers/hid/hid-appleir.c3
-rw-r--r--drivers/hid/hid-core.c2
-rw-r--r--drivers/hid/hid-ids.h5
-rw-r--r--drivers/hid/hid-kye.c14
-rw-r--r--drivers/hid/hid-multitouch.c6
-rw-r--r--drivers/hid/hid-sensor-hub.c22
-rw-r--r--drivers/hid/hid-sony.c53
-rw-r--r--drivers/hid/hid-wiimote-core.c5
-rw-r--r--drivers/hid/uhid.c2
-rw-r--r--drivers/hwmon/asus_atk0110.c1
-rw-r--r--drivers/hwmon/hih6130.c16
-rw-r--r--drivers/hwmon/lm78.c2
-rw-r--r--drivers/hwmon/lm90.c4
-rw-r--r--drivers/hwmon/sis5595.c2
-rw-r--r--drivers/hwmon/vt8231.c2
-rw-r--r--drivers/hwmon/w83l786ng.c13
-rw-r--r--drivers/i2c/busses/i2c-bcm-kona.c3
-rw-r--r--drivers/i2c/busses/i2c-bcm2835.c1
-rw-r--r--drivers/i2c/busses/i2c-davinci.c4
-rw-r--r--drivers/i2c/busses/i2c-diolan-u2c.c16
-rw-r--r--drivers/i2c/busses/i2c-imx.c4
-rw-r--r--drivers/i2c/busses/i2c-omap.c30
-rw-r--r--drivers/i2c/i2c-mux.c2
-rw-r--r--drivers/idle/intel_idle.c4
-rw-r--r--drivers/iio/accel/hid-sensor-accel-3d.c5
-rw-r--r--drivers/iio/accel/kxsd9.c7
-rw-r--r--drivers/iio/adc/at91_adc.c1
-rw-r--r--drivers/iio/adc/mcp3422.c8
-rw-r--r--drivers/iio/adc/ti_am335x_adc.c7
-rw-r--r--drivers/iio/common/hid-sensors/Kconfig9
-rw-r--r--drivers/iio/common/hid-sensors/hid-sensor-trigger.c29
-rw-r--r--drivers/iio/common/hid-sensors/hid-sensor-trigger.h2
-rw-r--r--drivers/iio/gyro/hid-sensor-gyro-3d.c5
-rw-r--r--drivers/iio/light/Kconfig3
-rw-r--r--drivers/iio/light/hid-sensor-als.c5
-rw-r--r--drivers/iio/magnetometer/Kconfig2
-rw-r--r--drivers/iio/magnetometer/hid-sensor-magn-3d.c5
-rw-r--r--drivers/iio/magnetometer/mag3110.c7
-rw-r--r--drivers/input/keyboard/adp5588-keys.c3
-rw-r--r--drivers/input/keyboard/adp5589-keys.c3
-rw-r--r--drivers/input/keyboard/bf54x-keys.c3
-rw-r--r--drivers/input/misc/adxl34x.c2
-rw-r--r--drivers/input/misc/hp_sdc_rtc.c5
-rw-r--r--drivers/input/misc/pcf8574_keypad.c7
-rw-r--r--drivers/input/mouse/alps.c206
-rw-r--r--drivers/input/mouse/alps.h1
-rw-r--r--drivers/input/mouse/elantech.c1
-rw-r--r--drivers/input/serio/serio.c24
-rw-r--r--drivers/input/touchscreen/Kconfig11
-rw-r--r--drivers/input/touchscreen/Makefile1
-rw-r--r--drivers/input/touchscreen/atmel-wm97xx.c2
-rw-r--r--drivers/input/touchscreen/cyttsp4_core.c3
-rw-r--r--drivers/input/touchscreen/sur40.c466
-rw-r--r--drivers/input/touchscreen/usbtouchscreen.c22
-rw-r--r--drivers/iommu/arm-smmu.c66
-rw-r--r--drivers/irqchip/irq-gic.c9
-rw-r--r--drivers/leds/leds-pwm.c53
-rw-r--r--drivers/macintosh/Makefile1
-rw-r--r--drivers/md/dm-bufio.c5
-rw-r--r--drivers/md/dm-cache-policy-mq.c13
-rw-r--r--drivers/md/dm-cache-target.c2
-rw-r--r--drivers/md/dm-delay.c23
-rw-r--r--drivers/md/dm-snap.c71
-rw-r--r--drivers/md/dm-stats.c1
-rw-r--r--drivers/md/dm-table.c5
-rw-r--r--drivers/md/dm-thin-metadata.c8
-rw-r--r--drivers/md/dm-thin-metadata.h1
-rw-r--r--drivers/md/dm-thin.c66
-rw-r--r--drivers/md/md.c14
-rw-r--r--drivers/md/persistent-data/dm-array.c10
-rw-r--r--drivers/md/persistent-data/dm-block-manager.c6
-rw-r--r--drivers/md/persistent-data/dm-block-manager.h7
-rw-r--r--drivers/md/persistent-data/dm-space-map-common.c32
-rw-r--r--drivers/md/persistent-data/dm-space-map-metadata.c8
-rw-r--r--drivers/md/raid5.c13
-rw-r--r--drivers/media/common/siano/smscoreapi.h4
-rw-r--r--drivers/media/common/siano/smsdvb.h2
-rw-r--r--drivers/media/dvb-core/dvb_demux.c9
-rw-r--r--drivers/media/dvb-frontends/af9033.c12
-rw-r--r--drivers/media/dvb-frontends/cxd2820r_c.c2
-rw-r--r--drivers/media/dvb-frontends/dib8000.c4
-rw-r--r--drivers/media/dvb-frontends/drxk_hard.c18
-rw-r--r--drivers/media/dvb-frontends/rtl2830.c1
-rw-r--r--drivers/media/i2c/adv7183_regs.h6
-rw-r--r--drivers/media/i2c/adv7604.c2
-rw-r--r--drivers/media/i2c/adv7842.c2
-rw-r--r--drivers/media/i2c/ir-kbd-i2c.c2
-rw-r--r--drivers/media/i2c/m5mols/m5mols_controls.c2
-rw-r--r--drivers/media/i2c/mt9p031.c1
-rw-r--r--drivers/media/i2c/s5c73m3/s5c73m3-core.c2
-rw-r--r--drivers/media/i2c/s5c73m3/s5c73m3.h2
-rw-r--r--drivers/media/i2c/saa7115.c2
-rw-r--r--drivers/media/i2c/soc_camera/ov5642.c2
-rw-r--r--drivers/media/i2c/ths7303.c3
-rw-r--r--drivers/media/i2c/wm8775.c4
-rw-r--r--drivers/media/pci/bt8xx/bttv-driver.c3
-rw-r--r--drivers/media/pci/cx18/cx18-driver.h2
-rw-r--r--drivers/media/pci/cx23885/cx23885-417.c2
-rw-r--r--drivers/media/pci/pluto2/pluto2.c2
-rw-r--r--drivers/media/pci/saa7164/saa7164-core.c4
-rw-r--r--drivers/media/platform/coda.c2
-rw-r--r--drivers/media/platform/exynos4-is/fimc-core.c2
-rw-r--r--drivers/media/platform/exynos4-is/media-dev.c2
-rw-r--r--drivers/media/platform/marvell-ccic/mmp-driver.c46
-rw-r--r--drivers/media/platform/omap3isp/isp.c2
-rw-r--r--drivers/media/platform/omap3isp/ispvideo.c7
-rw-r--r--drivers/media/platform/s5p-mfc/regs-mfc.h2
-rw-r--r--drivers/media/platform/s5p-mfc/s5p_mfc.c12
-rw-r--r--drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c2
-rw-r--r--drivers/media/platform/s5p-tv/mixer.h2
-rw-r--r--drivers/media/platform/s5p-tv/mixer_video.c4
-rw-r--r--drivers/media/platform/soc_camera/omap1_camera.c2
-rw-r--r--drivers/media/platform/vivi.c4
-rw-r--r--drivers/media/platform/vsp1/vsp1_drv.c2
-rw-r--r--drivers/media/platform/vsp1/vsp1_video.c4
-rw-r--r--drivers/media/radio/radio-shark.c4
-rw-r--r--drivers/media/radio/radio-shark2.c4
-rw-r--r--drivers/media/radio/radio-si476x.c4
-rw-r--r--drivers/media/radio/radio-tea5764.c2
-rw-r--r--drivers/media/radio/tef6862.c2
-rw-r--r--drivers/media/rc/imon.c2
-rw-r--r--drivers/media/rc/redrat3.c2
-rw-r--r--drivers/media/tuners/mt2063.c4
-rw-r--r--drivers/media/tuners/tuner-xc2028-types.h2
-rw-r--r--drivers/media/usb/cx231xx/cx231xx-cards.c2
-rw-r--r--drivers/media/usb/dvb-usb-v2/af9035.c17
-rw-r--r--drivers/media/usb/dvb-usb-v2/mxl111sf.c4
-rw-r--r--drivers/media/usb/dvb-usb/technisat-usb2.c2
-rw-r--r--drivers/media/usb/em28xx/em28xx-video.c2
-rw-r--r--drivers/media/usb/gspca/gl860/gl860.c2
-rw-r--r--drivers/media/usb/gspca/pac207.c2
-rw-r--r--drivers/media/usb/gspca/pac7302.c2
-rw-r--r--drivers/media/usb/gspca/stk1135.c3
-rw-r--r--drivers/media/usb/gspca/stv0680.c2
-rw-r--r--drivers/media/usb/gspca/sunplus.c1
-rw-r--r--drivers/media/usb/gspca/zc3xx.c2
-rw-r--r--drivers/media/usb/pwc/pwc-if.c2
-rw-r--r--drivers/media/usb/usbtv/usbtv.c174
-rw-r--r--drivers/media/usb/uvc/uvc_video.c2
-rw-r--r--drivers/media/v4l2-core/v4l2-ctrls.c2
-rw-r--r--drivers/media/v4l2-core/videobuf2-core.c29
-rw-r--r--drivers/media/v4l2-core/videobuf2-dma-contig.c4
-rw-r--r--drivers/media/v4l2-core/videobuf2-dma-sg.c3
-rw-r--r--drivers/mfd/Kconfig2
-rw-r--r--drivers/mfd/lpc_ich.c2
-rw-r--r--drivers/mfd/sec-core.c30
-rw-r--r--drivers/mfd/sec-irq.c6
-rw-r--r--drivers/mfd/ti-ssp.c2
-rw-r--r--drivers/misc/enclosure.c7
-rw-r--r--drivers/misc/mei/hw-me-regs.h5
-rw-r--r--drivers/misc/mei/pci-me.c4
-rw-r--r--drivers/misc/mic/card/mic_virtio.c33
-rw-r--r--drivers/misc/mic/card/mic_virtio.h7
-rw-r--r--drivers/misc/mic/host/mic_boot.c2
-rw-r--r--drivers/misc/mic/host/mic_virtio.c30
-rw-r--r--drivers/misc/mic/host/mic_x100.c4
-rw-r--r--drivers/mmc/host/omap.c45
-rw-r--r--drivers/mtd/nand/pxa3xx_nand.c6
-rw-r--r--drivers/net/bonding/bond_main.c10
-rw-r--r--drivers/net/bonding/bond_options.c13
-rw-r--r--drivers/net/bonding/bond_sysfs.c8
-rw-r--r--drivers/net/bonding/bonding.h7
-rw-r--r--drivers/net/can/c_can/c_can.c22
-rw-r--r--drivers/net/can/flexcan.c2
-rw-r--r--drivers/net/can/sja1000/sja1000.c17
-rw-r--r--drivers/net/ethernet/allwinner/sun4i-emac.c5
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c5
-rw-r--r--drivers/net/ethernet/broadcom/tg3.c54
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4/cxgb4.h82
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c278
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4/sge.c12
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4/t4_hw.c230
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4/t4_regs.h14
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h7
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4vf/adapter.h1
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c15
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4vf/sge.c2
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h24
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c4
-rw-r--r--drivers/net/ethernet/emulex/benet/be.h1
-rw-r--r--drivers/net/ethernet/emulex/benet/be_cmds.c7
-rw-r--r--drivers/net/ethernet/emulex/benet/be_hw.h3
-rw-r--r--drivers/net/ethernet/emulex/benet/be_main.c57
-rw-r--r--drivers/net/ethernet/freescale/fec_main.c13
-rw-r--r--drivers/net/ethernet/ibm/ehea/ehea_main.c2
-rw-r--r--drivers/net/ethernet/intel/e1000/e1000.h7
-rw-r--r--drivers/net/ethernet/intel/e1000/e1000_main.c60
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_main.c3
-rw-r--r--drivers/net/ethernet/intel/igb/e1000_phy.c5
-rw-r--r--drivers/net/ethernet/intel/igb/igb_ethtool.c7
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_main.c9
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c3
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h1
-rw-r--r--drivers/net/ethernet/marvell/mvneta.c4
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/en_selftest.c7
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/main.c2
-rw-r--r--drivers/net/ethernet/nvidia/forcedeth.c8
-rw-r--r--drivers/net/ethernet/qlogic/qlge/qlge.h2
-rw-r--r--drivers/net/ethernet/qlogic/qlge/qlge_ethtool.c4
-rw-r--r--drivers/net/ethernet/qlogic/qlge/qlge_main.c8
-rw-r--r--drivers/net/ethernet/realtek/8139cp.c5
-rw-r--r--drivers/net/ethernet/realtek/r8169.c5
-rw-r--r--drivers/net/ethernet/sfc/efx.c8
-rw-r--r--drivers/net/ethernet/sfc/mcdi.c39
-rw-r--r--drivers/net/ethernet/sfc/mcdi.h2
-rw-r--r--drivers/net/ethernet/sfc/mcdi_mon.c78
-rw-r--r--drivers/net/ethernet/sfc/net_driver.h3
-rw-r--r--drivers/net/ethernet/sfc/nic.h2
-rw-r--r--drivers/net/ethernet/sfc/ptp.c66
-rw-r--r--drivers/net/ethernet/sfc/rx.c6
-rw-r--r--drivers/net/ethernet/smsc/smc91x.c45
-rw-r--r--drivers/net/ethernet/smsc/smc91x.h22
-rw-r--r--drivers/net/ethernet/tehuti/tehuti.c1
-rw-r--r--drivers/net/ethernet/ti/cpsw.c19
-rw-r--r--drivers/net/ethernet/ti/davinci_emac.c26
-rw-r--r--drivers/net/ethernet/via/via-velocity.c11
-rw-r--r--drivers/net/ethernet/xilinx/ll_temac_main.c2
-rw-r--r--drivers/net/ethernet/xilinx/xilinx_axienet_main.c2
-rw-r--r--drivers/net/ethernet/xilinx/xilinx_emaclite.c51
-rw-r--r--drivers/net/macvtap.c25
-rw-r--r--drivers/net/phy/micrel.c15
-rw-r--r--drivers/net/phy/vitesse.c15
-rw-r--r--drivers/net/team/team.c4
-rw-r--r--drivers/net/tun.c18
-rw-r--r--drivers/net/virtio_net.c153
-rw-r--r--drivers/net/vxlan.c2
-rw-r--r--drivers/net/wireless/ath/ath9k/ar9003_eeprom.c22
-rw-r--r--drivers/net/wireless/ath/ath9k/hw.c7
-rw-r--r--drivers/net/wireless/ath/ath9k/xmit.c4
-rw-r--r--drivers/net/wireless/ath/wcn36xx/smd.c19
-rw-r--r--drivers/net/wireless/brcm80211/Kconfig2
-rw-r--r--drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c2
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-7000.c29
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-config.h5
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-csr.h5
-rw-r--r--drivers/net/wireless/iwlwifi/mvm/bt-coex.c6
-rw-r--r--drivers/net/wireless/iwlwifi/mvm/d3.c5
-rw-r--r--drivers/net/wireless/iwlwifi/mvm/debugfs.c4
-rw-r--r--drivers/net/wireless/iwlwifi/mvm/time-event.c7
-rw-r--r--drivers/net/wireless/iwlwifi/pcie/drv.c21
-rw-r--r--drivers/net/wireless/iwlwifi/pcie/internal.h8
-rw-r--r--drivers/net/wireless/iwlwifi/pcie/rx.c7
-rw-r--r--drivers/net/wireless/iwlwifi/pcie/trans.c3
-rw-r--r--drivers/net/wireless/iwlwifi/pcie/tx.c6
-rw-r--r--drivers/net/wireless/mac80211_hwsim.c16
-rw-r--r--drivers/net/wireless/mwifiex/sta_ioctl.c4
-rw-r--r--drivers/net/xen-netback/interface.c20
-rw-r--r--drivers/net/xen-netback/netback.c267
-rw-r--r--drivers/ntb/ntb_hw.c121
-rw-r--r--drivers/ntb/ntb_hw.h7
-rw-r--r--drivers/ntb/ntb_regs.h16
-rw-r--r--drivers/ntb/ntb_transport.c77
-rw-r--r--drivers/pci/host/pci-mvebu.c5
-rw-r--r--drivers/pci/pci-driver.c38
-rw-r--r--drivers/pci/pci.c8
-rw-r--r--drivers/pci/quirks.c4
-rw-r--r--drivers/pci/remove.c4
-rw-r--r--drivers/pinctrl/pinctrl-abx500.c6
-rw-r--r--drivers/pinctrl/pinctrl-abx500.h2
-rw-r--r--drivers/pinctrl/pinctrl-rockchip.c5
-rw-r--r--drivers/pinctrl/sh-pfc/pfc-r8a7740.c2
-rw-r--r--drivers/pinctrl/sh-pfc/pfc-sh7372.c2
-rw-r--r--drivers/platform/Kconfig1
-rw-r--r--drivers/platform/Makefile1
-rw-r--r--drivers/platform/chrome/Kconfig28
-rw-r--r--drivers/platform/chrome/Makefile2
-rw-r--r--drivers/platform/chrome/chromeos_laptop.c (renamed from drivers/platform/x86/chromeos_laptop.c)0
-rw-r--r--drivers/platform/x86/Kconfig11
-rw-r--r--drivers/platform/x86/Makefile1
-rw-r--r--drivers/platform/x86/asus-laptop.c5
-rw-r--r--drivers/platform/x86/dell-laptop.c288
-rw-r--r--drivers/platform/x86/dell-wmi.c7
-rw-r--r--drivers/platform/x86/eeepc-laptop.c4
-rw-r--r--drivers/platform/x86/hp-wmi.c14
-rw-r--r--drivers/platform/x86/ideapad-laptop.c4
-rw-r--r--drivers/platform/x86/intel_mid_powerbtn.c4
-rw-r--r--drivers/platform/x86/intel_scu_ipc.c117
-rw-r--r--drivers/platform/x86/panasonic-laptop.c5
-rw-r--r--drivers/platform/x86/sony-laptop.c47
-rw-r--r--drivers/platform/x86/thinkpad_acpi.c8
-rw-r--r--drivers/platform/x86/topstar-laptop.c4
-rw-r--r--drivers/platform/x86/toshiba_acpi.c4
-rw-r--r--drivers/platform/x86/wmi.c6
-rw-r--r--drivers/pnp/driver.c12
-rw-r--r--drivers/powercap/powercap_sys.c7
-rw-r--r--drivers/regulator/arizona-micsupp.c54
-rw-r--r--drivers/regulator/as3722-regulator.c2
-rw-r--r--drivers/regulator/core.c14
-rw-r--r--drivers/regulator/gpio-regulator.c7
-rw-r--r--drivers/regulator/pfuze100-regulator.c14
-rw-r--r--drivers/regulator/s5m8767.c2
-rw-r--r--drivers/rtc/rtc-at91rm9200.c2
-rw-r--r--drivers/rtc/rtc-s5m.c118
-rw-r--r--drivers/s390/block/dasd_eckd.c2
-rw-r--r--drivers/s390/block/dasd_genhd.c1
-rw-r--r--drivers/s390/char/sclp_early.c5
-rw-r--r--drivers/scsi/3w-9xxx.c3
-rw-r--r--drivers/scsi/3w-sas.c3
-rw-r--r--drivers/scsi/3w-xxxx.c3
-rw-r--r--drivers/scsi/aacraid/linit.c1
-rw-r--r--drivers/scsi/arcmsr/arcmsr_hba.c1
-rw-r--r--drivers/scsi/bfa/bfa_fcs.h1
-rw-r--r--drivers/scsi/bfa/bfa_fcs_lport.c14
-rw-r--r--drivers/scsi/bfa/bfad_attr.c7
-rw-r--r--drivers/scsi/gdth.c1
-rw-r--r--drivers/scsi/hosts.c1
-rw-r--r--drivers/scsi/hpsa.c5
-rw-r--r--drivers/scsi/ipr.c3
-rw-r--r--drivers/scsi/ips.c1
-rw-r--r--drivers/scsi/libsas/sas_ata.c2
-rw-r--r--drivers/scsi/megaraid.c1
-rw-r--r--drivers/scsi/megaraid/megaraid_mbox.c1
-rw-r--r--drivers/scsi/megaraid/megaraid_sas_base.c1
-rw-r--r--drivers/scsi/pm8001/pm8001_hwi.c2
-rw-r--r--drivers/scsi/pm8001/pm8001_hwi.h4
-rw-r--r--drivers/scsi/pm8001/pm8001_init.c91
-rw-r--r--drivers/scsi/pm8001/pm8001_sas.c4
-rw-r--r--drivers/scsi/pm8001/pm8001_sas.h9
-rw-r--r--drivers/scsi/pm8001/pm80xx_hwi.c2
-rw-r--r--drivers/scsi/pm8001/pm80xx_hwi.h2
-rw-r--r--drivers/scsi/pmcraid.c21
-rw-r--r--drivers/scsi/sd.c6
-rw-r--r--drivers/scsi/storvsc_drv.c1
-rw-r--r--drivers/spi/spi-bcm2835.c2
-rw-r--r--drivers/spi/spi-bcm63xx.c2
-rw-r--r--drivers/spi/spi-mpc512x-psc.c2
-rw-r--r--drivers/spi/spi-mxs.c2
-rw-r--r--drivers/spi/spi-pxa2xx.c5
-rw-r--r--drivers/spi/spi-rspi.c3
-rw-r--r--drivers/spi/spi-ti-qspi.c23
-rw-r--r--drivers/spi/spi-txx9.c2
-rw-r--r--drivers/spi/spi.c2
-rw-r--r--drivers/staging/btmtk_usb/btmtk_usb.c3
-rw-r--r--drivers/staging/comedi/drivers/pcl730.c6
-rw-r--r--drivers/staging/comedi/drivers/s626.c2
-rw-r--r--drivers/staging/comedi/drivers/vmk80xx.c2
-rw-r--r--drivers/staging/ft1000/ft1000-usb/ft1000_download.c3
-rw-r--r--drivers/staging/iio/magnetometer/Kconfig2
-rw-r--r--drivers/staging/imx-drm/Makefile4
-rw-r--r--drivers/staging/imx-drm/imx-drm-core.c1
-rw-r--r--drivers/staging/lustre/lustre/ptlrpc/pinger.c4
-rw-r--r--drivers/staging/media/go7007/go7007-usb.c28
-rw-r--r--drivers/staging/nvec/nvec.c3
-rw-r--r--drivers/staging/rtl8188eu/core/rtw_ap.c3
-rw-r--r--drivers/staging/tidspbridge/Kconfig2
-rw-r--r--drivers/staging/tidspbridge/rmgr/drv_interface.c13
-rw-r--r--drivers/staging/vt6655/hostap.c3
-rw-r--r--drivers/staging/vt6656/baseband.c11
-rw-r--r--drivers/staging/vt6656/hostap.c3
-rw-r--r--drivers/staging/vt6656/rndis.h2
-rw-r--r--drivers/staging/zram/zram_drv.c19
-rw-r--r--drivers/staging/zsmalloc/zsmalloc-main.c17
-rw-r--r--drivers/tty/amiserial.c3
-rw-r--r--drivers/tty/n_tty.c22
-rw-r--r--drivers/tty/serial/8250/Kconfig2
-rw-r--r--drivers/tty/serial/pmac_zilog.c3
-rw-r--r--drivers/tty/tty_io.c1
-rw-r--r--drivers/uio/uio.c2
-rw-r--r--drivers/usb/class/cdc-acm.c2
-rw-r--r--drivers/usb/core/hub.c5
-rw-r--r--drivers/usb/dwc3/ep0.c2
-rw-r--r--drivers/usb/dwc3/gadget.c5
-rw-r--r--drivers/usb/gadget/Kconfig1
-rw-r--r--drivers/usb/gadget/composite.c1
-rw-r--r--drivers/usb/gadget/f_fs.c2
-rw-r--r--drivers/usb/gadget/f_mass_storage.c27
-rw-r--r--drivers/usb/gadget/pxa25x_udc.c1
-rw-r--r--drivers/usb/gadget/s3c-hsotg.c7
-rw-r--r--drivers/usb/gadget/storage_common.h4
-rw-r--r--drivers/usb/gadget/tcm_usb_gadget.c2
-rw-r--r--drivers/usb/gadget/zero.c6
-rw-r--r--drivers/usb/host/ohci-pxa27x.c1
-rw-r--r--drivers/usb/host/xhci-ring.c54
-rw-r--r--drivers/usb/musb/musb_core.c9
-rw-r--r--drivers/usb/musb/musb_cppi41.c164
-rw-r--r--drivers/usb/musb/musb_gadget.c4
-rw-r--r--drivers/usb/phy/phy-am335x.c5
-rw-r--r--drivers/usb/phy/phy-generic.c68
-rw-r--r--drivers/usb/phy/phy-generic.h4
-rw-r--r--drivers/usb/phy/phy-mxs-usb.c2
-rw-r--r--drivers/usb/phy/phy-rcar-gen2-usb.c4
-rw-r--r--drivers/usb/serial/ftdi_sio.c37
-rw-r--r--drivers/usb/serial/generic.c12
-rw-r--r--drivers/usb/serial/mos7840.c32
-rw-r--r--drivers/usb/serial/option.c27
-rw-r--r--drivers/usb/serial/pl2303.c30
-rw-r--r--drivers/usb/serial/spcp8x5.c30
-rw-r--r--drivers/usb/wusbcore/devconnect.c72
-rw-r--r--drivers/usb/wusbcore/security.c98
-rw-r--r--drivers/usb/wusbcore/wusbhc.h6
-rw-r--r--drivers/video/atmel_lcdfb.c1
-rw-r--r--drivers/video/kyro/fbdev.c6
-rw-r--r--drivers/video/offb.c29
-rw-r--r--drivers/video/omap2/displays-new/panel-sony-acx565akm.c5
-rw-r--r--drivers/video/sh_mobile_meram.c2
-rw-r--r--drivers/video/vt8500lcdfb.c25
-rw-r--r--drivers/watchdog/bcm2835_wdt.c1
-rw-r--r--drivers/watchdog/ep93xx_wdt.c1
-rw-r--r--drivers/watchdog/ie6xx_wdt.c1
-rw-r--r--drivers/watchdog/jz4740_wdt.c1
-rw-r--r--drivers/watchdog/kempld_wdt.c1
-rw-r--r--drivers/watchdog/max63xx_wdt.c1
-rw-r--r--drivers/watchdog/orion_wdt.c1
-rw-r--r--drivers/watchdog/pnx4008_wdt.c1
-rw-r--r--drivers/watchdog/rt2880_wdt.c1
-rw-r--r--drivers/watchdog/sc1200wdt.c3
-rw-r--r--drivers/watchdog/shwdt.c1
-rw-r--r--drivers/watchdog/softdog.c1
-rw-r--r--drivers/watchdog/stmp3xxx_rtc_wdt.c1
-rw-r--r--drivers/watchdog/txx9wdt.c1
-rw-r--r--drivers/watchdog/ux500_wdt.c1
-rw-r--r--drivers/xen/grant-table.c6
-rw-r--r--drivers/xen/swiotlb-xen.c5
-rw-r--r--fs/affs/Changes2
-rw-r--r--fs/aio.c8
-rw-r--r--fs/btrfs/check-integrity.c32
-rw-r--r--fs/btrfs/check-integrity.h2
-rw-r--r--fs/btrfs/extent-tree.c22
-rw-r--r--fs/btrfs/extent_io.c12
-rw-r--r--fs/btrfs/ioctl.c3
-rw-r--r--fs/btrfs/relocation.c81
-rw-r--r--fs/btrfs/scrub.c33
-rw-r--r--fs/btrfs/send.c4
-rw-r--r--fs/btrfs/super.c5
-rw-r--r--fs/ceph/addr.c2
-rw-r--r--fs/ceph/cache.c3
-rw-r--r--fs/ceph/caps.c27
-rw-r--r--fs/ceph/dir.c11
-rw-r--r--fs/ceph/inode.c49
-rw-r--r--fs/ceph/mds_client.c61
-rw-r--r--fs/ceph/mds_client.h1
-rw-r--r--fs/ceph/super.h8
-rw-r--r--fs/cifs/cifsglob.h1
-rw-r--r--fs/cifs/ioctl.c6
-rw-r--r--fs/cifs/smb2ops.c99
-rw-r--r--fs/cifs/smb2pdu.c92
-rw-r--r--fs/cifs/smb2pdu.h12
-rw-r--r--fs/cifs/smb2proto.h1
-rw-r--r--fs/cifs/smbfsctl.h2
-rw-r--r--fs/dcache.c2
-rw-r--r--fs/eventpoll.c3
-rw-r--r--fs/hfsplus/wrapper.c17
-rw-r--r--fs/logfs/dev_bdev.c13
-rw-r--r--fs/namei.c10
-rw-r--r--fs/nfs/blocklayout/blocklayout.h1
-rw-r--r--fs/nfs/blocklayout/extents.c2
-rw-r--r--fs/nfs/dns_resolve.c2
-rw-r--r--fs/nfs/inode.c2
-rw-r--r--fs/nfs/internal.h15
-rw-r--r--fs/nfs/nfs4_fs.h8
-rw-r--r--fs/nfs/nfs4proc.c30
-rw-r--r--fs/nfsd/nfscache.c9
-rw-r--r--fs/pipe.c39
-rw-r--r--fs/proc/inode.c14
-rw-r--r--fs/squashfs/file_direct.c5
-rw-r--r--fs/sysfs/file.c22
-rw-r--r--fs/xfs/xfs_discard.c5
-rw-r--r--fs/xfs/xfs_fsops.c6
-rw-r--r--fs/xfs/xfs_ioctl.c3
-rw-r--r--fs/xfs/xfs_ioctl32.c3
-rw-r--r--include/acpi/acconfig.h2
-rw-r--r--include/acpi/acpi_bus.h1
-rw-r--r--include/acpi/acpixf.h2
-rw-r--r--include/asm-generic/simd.h14
-rw-r--r--include/asm-generic/word-at-a-time.h8
-rw-r--r--include/crypto/ablk_helper.h (renamed from arch/x86/include/asm/crypto/ablk_helper.h)0
-rw-r--r--include/crypto/algapi.h18
-rw-r--r--include/crypto/authenc.h12
-rw-r--r--include/crypto/scatterwalk.h3
-rw-r--r--include/linux/assoc_array.h6
-rw-r--r--include/linux/compiler-intel.h2
-rw-r--r--include/linux/dcache.h2
-rw-r--r--include/linux/efi.h4
-rw-r--r--include/linux/ftrace_event.h16
-rw-r--r--include/linux/gpio/driver.h14
-rw-r--r--include/linux/hid-sensor-hub.h5
-rw-r--r--include/linux/hid-sensor-ids.h12
-rw-r--r--include/linux/hugetlb.h5
-rw-r--r--include/linux/ipv6.h1
-rw-r--r--include/linux/irqreturn.h2
-rw-r--r--include/linux/kernel.h3
-rw-r--r--include/linux/kexec.h3
-rw-r--r--include/linux/mfd/samsung/core.h3
-rw-r--r--include/linux/micrel_phy.h2
-rw-r--r--include/linux/net.h2
-rw-r--r--include/linux/netdevice.h2
-rw-r--r--include/linux/nfs4.h10
-rw-r--r--include/linux/nfs_fs.h18
-rw-r--r--include/linux/padata.h3
-rw-r--r--include/linux/pci.h31
-rw-r--r--include/linux/sched.h2
-rw-r--r--include/linux/shmem_fs.h2
-rw-r--r--include/linux/skbuff.h39
-rw-r--r--include/linux/slab.h102
-rw-r--r--include/linux/tegra-powergate.h27
-rw-r--r--include/linux/tracepoint.h4
-rw-r--r--include/linux/usb.h2
-rw-r--r--include/linux/usb/wusb.h2
-rw-r--r--include/media/videobuf2-core.h2
-rw-r--r--include/net/ip.h2
-rw-r--r--include/net/ipv6.h9
-rw-r--r--include/net/ping.h3
-rw-r--r--include/net/sctp/structs.h7
-rw-r--r--include/net/sock.h6
-rw-r--r--include/scsi/scsi_host.h6
-rw-r--r--include/sound/memalloc.h2
-rw-r--r--include/sound/soc-dapm.h3
-rw-r--r--include/trace/ftrace.h12
-rw-r--r--include/uapi/linux/eventpoll.h13
-rw-r--r--include/uapi/linux/genetlink.h1
-rw-r--r--include/uapi/linux/if_link.h4
-rw-r--r--include/uapi/linux/input.h3
-rw-r--r--include/uapi/linux/mic_common.h40
-rw-r--r--include/uapi/linux/netlink_diag.h1
-rw-r--r--include/uapi/linux/packet_diag.h1
-rw-r--r--include/uapi/linux/unix_diag.h1
-rw-r--r--include/uapi/sound/compress_offload.h6
-rw-r--r--kernel/.gitignore1
-rw-r--r--kernel/cgroup.c35
-rw-r--r--kernel/cpuset.c8
-rw-r--r--kernel/events/core.c8
-rw-r--r--kernel/extable.c4
-rw-r--r--kernel/futex.c7
-rw-r--r--kernel/irq/pm.c2
-rw-r--r--kernel/kexec.c4
-rw-r--r--kernel/padata.c9
-rw-r--r--kernel/rcu/tree_plugin.h4
-rw-r--r--kernel/sched/core.c8
-rw-r--r--kernel/sched/fair.c27
-rw-r--r--kernel/system_certificates.S14
-rw-r--r--kernel/system_keyring.c4
-rw-r--r--kernel/time/tick-common.c15
-rw-r--r--kernel/time/tick-sched.c25
-rw-r--r--kernel/time/timekeeping.c2
-rw-r--r--kernel/timer.c5
-rw-r--r--kernel/trace/ftrace.c64
-rw-r--r--kernel/trace/trace_event_perf.c8
-rw-r--r--kernel/trace/trace_events.c3
-rw-r--r--kernel/trace/trace_syscalls.c10
-rw-r--r--kernel/workqueue.c82
-rw-r--r--lib/assoc_array.c4
-rw-r--r--lib/lockref.c9
-rw-r--r--mm/huge_memory.c12
-rw-r--r--mm/memcontrol.c41
-rw-r--r--mm/shmem.c36
-rw-r--r--net/bridge/br_private.h10
-rw-r--r--net/bridge/br_stp_bpdu.c2
-rw-r--r--net/compat.c2
-rw-r--r--net/core/drop_monitor.c1
-rw-r--r--net/core/pktgen.c7
-rw-r--r--net/core/skbuff.c1
-rw-r--r--net/core/sock.c2
-rw-r--r--net/dccp/ipv6.c1
-rw-r--r--net/hsr/hsr_framereg.c3
-rw-r--r--net/hsr/hsr_netlink.c28
-rw-r--r--net/ipv4/fib_rules.c5
-rw-r--r--net/ipv4/ip_sockglue.c3
-rw-r--r--net/ipv4/ping.c7
-rw-r--r--net/ipv4/protocol.c8
-rw-r--r--net/ipv4/raw.c2
-rw-r--r--net/ipv4/tcp_ipv4.c2
-rw-r--r--net/ipv4/tcp_memcontrol.c9
-rw-r--r--net/ipv4/tcp_offload.c31
-rw-r--r--net/ipv4/udp.c54
-rw-r--r--net/ipv6/addrconf.c2
-rw-r--r--net/ipv6/datagram.c9
-rw-r--r--net/ipv6/fib6_rules.c6
-rw-r--r--net/ipv6/ip6_output.c4
-rw-r--r--net/ipv6/ndisc.c3
-rw-r--r--net/ipv6/ping.c3
-rw-r--r--net/ipv6/protocol.c4
-rw-r--r--net/ipv6/raw.c5
-rw-r--r--net/ipv6/route.c30
-rw-r--r--net/ipv6/sit.c50
-rw-r--r--net/ipv6/tcp_ipv6.c1
-rw-r--r--net/ipv6/tcpv6_offload.c32
-rw-r--r--net/ipv6/udp.c5
-rw-r--r--net/l2tp/l2tp_ip6.c3
-rw-r--r--net/mac80211/cfg.c15
-rw-r--r--net/mac80211/ibss.c4
-rw-r--r--net/mac80211/ieee80211_i.h1
-rw-r--r--net/mac80211/iface.c1
-rw-r--r--net/mac80211/main.c3
-rw-r--r--net/mac80211/mesh.c20
-rw-r--r--net/mac80211/mlme.c2
-rw-r--r--net/mac80211/rc80211_minstrel_ht.c7
-rw-r--r--net/mac80211/rx.c3
-rw-r--r--net/mac80211/scan.c2
-rw-r--r--net/mac80211/spectmgmt.c2
-rw-r--r--net/mac80211/util.c11
-rw-r--r--net/netfilter/ipset/ip_set_hash_netnet.c2
-rw-r--r--net/netfilter/nf_tables_api.c46
-rw-r--r--net/netfilter/xt_hashlimit.c25
-rw-r--r--net/netlink/genetlink.c13
-rw-r--r--net/packet/af_packet.c69
-rw-r--r--net/rds/ib_send.c5
-rw-r--r--net/sched/act_api.c26
-rw-r--r--net/sched/act_csum.c2
-rw-r--r--net/sched/act_gact.c2
-rw-r--r--net/sched/act_ipt.c4
-rw-r--r--net/sched/act_mirred.c2
-rw-r--r--net/sched/act_nat.c2
-rw-r--r--net/sched/act_pedit.c2
-rw-r--r--net/sched/act_police.c1
-rw-r--r--net/sched/act_simple.c1
-rw-r--r--net/sched/act_skbedit.c1
-rw-r--r--net/sched/sch_htb.c20
-rw-r--r--net/sched/sch_netem.c7
-rw-r--r--net/sched/sch_tbf.c139
-rw-r--r--net/sctp/associola.c5
-rw-r--r--net/sctp/output.c6
-rw-r--r--net/sctp/outqueue.c6
-rw-r--r--net/sctp/sm_statefuns.c12
-rw-r--r--net/sctp/socket.c36
-rw-r--r--net/sctp/sysctl.c76
-rw-r--r--net/sctp/transport.c2
-rw-r--r--net/socket.c2
-rw-r--r--net/sunrpc/auth_gss/auth_gss.c2
-rw-r--r--net/tipc/core.c7
-rw-r--r--net/tipc/handler.c11
-rw-r--r--net/unix/af_unix.c8
-rw-r--r--net/wireless/core.c9
-rw-r--r--net/wireless/ibss.c18
-rw-r--r--net/wireless/nl80211.c60
-rwxr-xr-xscripts/recordmcount.pl3
-rw-r--r--scripts/sortextable.c5
-rw-r--r--security/integrity/digsig.c30
-rw-r--r--security/integrity/ima/Kconfig8
-rw-r--r--security/integrity/ima/ima.h7
-rw-r--r--security/integrity/ima/ima_api.c22
-rw-r--r--security/integrity/ima/ima_appraise.c11
-rw-r--r--security/integrity/ima/ima_crypto.c17
-rw-r--r--security/integrity/ima/ima_fs.c14
-rw-r--r--security/integrity/ima/ima_init.c3
-rw-r--r--security/integrity/ima/ima_template.c21
-rw-r--r--security/integrity/ima/ima_template_lib.c6
-rw-r--r--security/integrity/integrity.h7
-rw-r--r--security/keys/big_key.c2
-rw-r--r--security/keys/key.c8
-rw-r--r--security/keys/keyring.c17
-rw-r--r--security/selinux/hooks.c177
-rw-r--r--security/selinux/include/xfrm.h8
-rw-r--r--security/selinux/ss/services.c42
-rw-r--r--security/selinux/xfrm.c62
-rw-r--r--sound/atmel/abdac.c3
-rw-r--r--sound/firewire/amdtp.c15
-rw-r--r--sound/firewire/dice.c4
-rw-r--r--sound/pci/hda/hda_codec.h1
-rw-r--r--sound/pci/hda/hda_generic.c126
-rw-r--r--sound/pci/hda/hda_generic.h3
-rw-r--r--sound/pci/hda/hda_intel.c12
-rw-r--r--sound/pci/hda/patch_analog.c16
-rw-r--r--sound/pci/hda/patch_conexant.c24
-rw-r--r--sound/pci/hda/patch_hdmi.c32
-rw-r--r--sound/pci/hda/patch_realtek.c141
-rw-r--r--sound/pci/hda/patch_sigmatel.c3
-rw-r--r--sound/soc/atmel/atmel_ssc_dai.c30
-rw-r--r--sound/soc/atmel/sam9x5_wm8731.c4
-rw-r--r--sound/soc/codecs/wm5110.c27
-rw-r--r--sound/soc/codecs/wm8731.c4
-rw-r--r--sound/soc/codecs/wm8904.c2
-rw-r--r--sound/soc/codecs/wm8962.c13
-rw-r--r--sound/soc/codecs/wm8990.c2
-rw-r--r--sound/soc/codecs/wm_adsp.c10
-rw-r--r--sound/soc/fsl/imx-wm8962.c2
-rw-r--r--sound/soc/fsl/pcm030-audio-fabric.c3
-rw-r--r--sound/soc/kirkwood/kirkwood-i2s.c46
-rw-r--r--sound/soc/omap/n810.c4
-rw-r--r--sound/soc/sh/Kconfig1
-rw-r--r--sound/soc/soc-core.c4
-rw-r--r--sound/soc/soc-devres.c4
-rw-r--r--sound/soc/soc-generic-dmaengine-pcm.c38
-rw-r--r--sound/soc/soc-pcm.c23
-rw-r--r--sound/usb/endpoint.c16
-rw-r--r--sound/usb/mixer_quirks.c2
-rw-r--r--tools/lib/traceevent/event-parse.c25
-rw-r--r--tools/perf/util/header.c6
-rw-r--r--tools/perf/util/thread.c11
-rw-r--r--tools/power/cpupower/man/cpupower-idle-info.13
-rw-r--r--tools/power/cpupower/man/cpupower-idle-set.171
-rw-r--r--tools/power/cpupower/utils/helpers/sysfs.c4
-rw-r--r--tools/usb/Makefile5
-rw-r--r--virt/kvm/kvm_main.c3
1087 files changed, 12768 insertions, 5809 deletions
diff --git a/CREDITS b/CREDITS
index 4fc997d58ab2..4c7738f49357 100644
--- a/CREDITS
+++ b/CREDITS
@@ -655,6 +655,11 @@ S: Stanford University
S: Stanford, California 94305
S: USA
+N: Carlos Chinea
+E: carlos.chinea@nokia.com
+E: cch.devel@gmail.com
+D: Author of HSI Subsystem
+
N: Randolph Chung
E: tausq@debian.org
D: Linux/PA-RISC hacker
diff --git a/Documentation/Changes b/Documentation/Changes
index b17580885273..07c75d18154e 100644
--- a/Documentation/Changes
+++ b/Documentation/Changes
@@ -196,13 +196,6 @@ chmod 0644 /dev/cpu/microcode
as root before you can use this. You'll probably also want to
get the user-space microcode_ctl utility to use with this.
-Powertweak
-----------
-
-If you are running v0.1.17 or earlier, you should upgrade to
-version v0.99.0 or higher. Running old versions may cause problems
-with programs using shared memory.
-
udev
----
udev is a userspace application for populating /dev dynamically with
@@ -366,10 +359,6 @@ Intel P6 microcode
------------------
o <http://www.urbanmyth.org/microcode/>
-Powertweak
-----------
-o <http://powertweak.sourceforge.net/>
-
udev
----
o <http://www.kernel.org/pub/linux/utils/kernel/hotplug/udev.html>
diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl
index 6c9d9d37c83a..f5170082bdb3 100644
--- a/Documentation/DocBook/device-drivers.tmpl
+++ b/Documentation/DocBook/device-drivers.tmpl
@@ -58,7 +58,7 @@
</sect1>
<sect1><title>Wait queues and Wake events</title>
!Iinclude/linux/wait.h
-!Ekernel/wait.c
+!Ekernel/sched/wait.c
</sect1>
<sect1><title>High-resolution timers</title>
!Iinclude/linux/ktime.h
diff --git a/Documentation/DocBook/media/v4l/vidioc-expbuf.xml b/Documentation/DocBook/media/v4l/vidioc-expbuf.xml
index e287c8fc803b..4165e7bfa4ff 100644
--- a/Documentation/DocBook/media/v4l/vidioc-expbuf.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-expbuf.xml
@@ -73,7 +73,8 @@ range from zero to the maximal number of valid planes for the currently active
format. For the single-planar API, applications must set <structfield> plane
</structfield> to zero. Additional flags may be posted in the <structfield>
flags </structfield> field. Refer to a manual for open() for details.
-Currently only O_CLOEXEC is supported. All other fields must be set to zero.
+Currently only O_CLOEXEC, O_RDONLY, O_WRONLY, and O_RDWR are supported. All
+other fields must be set to zero.
In the case of multi-planar API, every plane is exported separately using
multiple <constant> VIDIOC_EXPBUF </constant> calls. </para>
@@ -170,8 +171,9 @@ multi-planar API. Otherwise this value must be set to zero. </entry>
<entry>__u32</entry>
<entry><structfield>flags</structfield></entry>
<entry>Flags for the newly created file, currently only <constant>
-O_CLOEXEC </constant> is supported, refer to the manual of open() for more
-details.</entry>
+O_CLOEXEC </constant>, <constant>O_RDONLY</constant>, <constant>O_WRONLY
+</constant>, and <constant>O_RDWR</constant> are supported, refer to the manual
+of open() for more details.</entry>
</row>
<row>
<entry>__s32</entry>
diff --git a/Documentation/assoc_array.txt b/Documentation/assoc_array.txt
index f4faec0f66e4..2f2c6cdd73c0 100644
--- a/Documentation/assoc_array.txt
+++ b/Documentation/assoc_array.txt
@@ -164,10 +164,10 @@ This points to a number of methods, all of which need to be provided:
(4) Diff the index keys of two objects.
- int (*diff_objects)(const void *a, const void *b);
+ int (*diff_objects)(const void *object, const void *index_key);
- Return the bit position at which the index keys of two objects differ or
- -1 if they are the same.
+ Return the bit position at which the index key of the specified object
+ differs from the given index key or -1 if they are the same.
(5) Free an object.
diff --git a/Documentation/device-mapper/cache.txt b/Documentation/device-mapper/cache.txt
index 274752f8bdf9..719320b5ed3f 100644
--- a/Documentation/device-mapper/cache.txt
+++ b/Documentation/device-mapper/cache.txt
@@ -266,10 +266,12 @@ E.g.
Invalidation is removing an entry from the cache without writing it
back. Cache blocks can be invalidated via the invalidate_cblocks
message, which takes an arbitrary number of cblock ranges. Each cblock
-must be expressed as a decimal value, in the future a variant message
-that takes cblock ranges expressed in hexidecimal may be needed to
-better support efficient invalidation of larger caches. The cache must
-be in passthrough mode when invalidate_cblocks is used.
+range's end value is "one past the end", meaning 5-10 expresses a range
+of values from 5 to 9. Each cblock must be expressed as a decimal
+value, in the future a variant message that takes cblock ranges
+expressed in hexidecimal may be needed to better support efficient
+invalidation of larger caches. The cache must be in passthrough mode
+when invalidate_cblocks is used.
invalidate_cblocks [<cblock>|<cblock begin>-<cblock end>]*
diff --git a/Documentation/devicetree/bindings/arm/omap/mpu.txt b/Documentation/devicetree/bindings/arm/omap/mpu.txt
index 1a5a42ce21bb..83f405bde138 100644
--- a/Documentation/devicetree/bindings/arm/omap/mpu.txt
+++ b/Documentation/devicetree/bindings/arm/omap/mpu.txt
@@ -7,10 +7,18 @@ The MPU contain CPUs, GIC, L2 cache and a local PRCM.
Required properties:
- compatible : Should be "ti,omap3-mpu" for OMAP3
Should be "ti,omap4-mpu" for OMAP4
+ Should be "ti,omap5-mpu" for OMAP5
- ti,hwmods: "mpu"
Examples:
+- For an OMAP5 SMP system:
+
+mpu {
+ compatible = "ti,omap5-mpu";
+ ti,hwmods = "mpu"
+};
+
- For an OMAP4 SMP system:
mpu {
diff --git a/Documentation/devicetree/bindings/arm/pmu.txt b/Documentation/devicetree/bindings/arm/pmu.txt
index 343781b9f246..3e1e498fea96 100644
--- a/Documentation/devicetree/bindings/arm/pmu.txt
+++ b/Documentation/devicetree/bindings/arm/pmu.txt
@@ -7,6 +7,7 @@ representation in the device tree should be done as under:-
Required properties:
- compatible : should be one of
+ "arm,armv8-pmuv3"
"arm,cortex-a15-pmu"
"arm,cortex-a9-pmu"
"arm,cortex-a8-pmu"
diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
index 47ada1dff216..5d49f2b37f68 100644
--- a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
+++ b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
@@ -49,7 +49,7 @@ adc@12D10000 {
/* NTC thermistor is a hwmon device */
ncp15wb473@0 {
compatible = "ntc,ncp15wb473";
- pullup-uV = <1800000>;
+ pullup-uv = <1800000>;
pullup-ohm = <47000>;
pulldown-ohm = <0>;
io-channels = <&adc 4>;
diff --git a/Documentation/devicetree/bindings/clock/exynos4-clock.txt b/Documentation/devicetree/bindings/clock/exynos4-clock.txt
index c6bf8a6c8f52..a2ac2d9ac71a 100644
--- a/Documentation/devicetree/bindings/clock/exynos4-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos4-clock.txt
@@ -6,7 +6,7 @@ SoC's in the Exynos4 family.
Required Properties:
-- comptible: should be one of the following.
+- compatible: should be one of the following.
- "samsung,exynos4210-clock" - controller compatible with Exynos4210 SoC.
- "samsung,exynos4412-clock" - controller compatible with Exynos4412 SoC.
diff --git a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt
index 24765c146e31..46f5c791ea0d 100644
--- a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt
@@ -5,7 +5,7 @@ controllers within the Exynos5250 SoC.
Required Properties:
-- comptible: should be one of the following.
+- compatible: should be one of the following.
- "samsung,exynos5250-clock" - controller compatible with Exynos5250 SoC.
- reg: physical base address of the controller and length of memory mapped
diff --git a/Documentation/devicetree/bindings/clock/exynos5420-clock.txt b/Documentation/devicetree/bindings/clock/exynos5420-clock.txt
index 32aa34ecad36..458f34789e5d 100644
--- a/Documentation/devicetree/bindings/clock/exynos5420-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos5420-clock.txt
@@ -5,7 +5,7 @@ controllers within the Exynos5420 SoC.
Required Properties:
-- comptible: should be one of the following.
+- compatible: should be one of the following.
- "samsung,exynos5420-clock" - controller compatible with Exynos5420 SoC.
- reg: physical base address of the controller and length of memory mapped
diff --git a/Documentation/devicetree/bindings/clock/exynos5440-clock.txt b/Documentation/devicetree/bindings/clock/exynos5440-clock.txt
index 4499e9966bc9..9955dc9c7d96 100644
--- a/Documentation/devicetree/bindings/clock/exynos5440-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos5440-clock.txt
@@ -5,7 +5,7 @@ controllers within the Exynos5440 SoC.
Required Properties:
-- comptible: should be "samsung,exynos5440-clock".
+- compatible: should be "samsung,exynos5440-clock".
- reg: physical base address of the controller and length of memory mapped
region.
diff --git a/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt b/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt
index b0019eb5330e..798cfc9d3839 100644
--- a/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt
@@ -5,16 +5,42 @@ This is for the non-QE/CPM/GUTs GPIO controllers as found on
Every GPIO controller node must have #gpio-cells property defined,
this information will be used to translate gpio-specifiers.
+See bindings/gpio/gpio.txt for details of how to specify GPIO
+information for devices.
+
+The GPIO module usually is connected to the SoC's internal interrupt
+controller, see bindings/interrupt-controller/interrupts.txt (the
+interrupt client nodes section) for details how to specify this GPIO
+module's interrupt.
+
+The GPIO module may serve as another interrupt controller (cascaded to
+the SoC's internal interrupt controller). See the interrupt controller
+nodes section in bindings/interrupt-controller/interrupts.txt for
+details.
Required properties:
-- compatible : "fsl,<CHIP>-gpio" followed by "fsl,mpc8349-gpio" for
- 83xx, "fsl,mpc8572-gpio" for 85xx and "fsl,mpc8610-gpio" for 86xx.
-- #gpio-cells : Should be two. The first cell is the pin number and the
- second cell is used to specify optional parameters (currently unused).
- - interrupts : Interrupt mapping for GPIO IRQ.
- - interrupt-parent : Phandle for the interrupt controller that
- services interrupts for this device.
-- gpio-controller : Marks the port as GPIO controller.
+- compatible: "fsl,<chip>-gpio" followed by "fsl,mpc8349-gpio"
+ for 83xx, "fsl,mpc8572-gpio" for 85xx, or
+ "fsl,mpc8610-gpio" for 86xx.
+- #gpio-cells: Should be two. The first cell is the pin number
+ and the second cell is used to specify optional
+ parameters (currently unused).
+- interrupt-parent: Phandle for the interrupt controller that
+ services interrupts for this device.
+- interrupts: Interrupt mapping for GPIO IRQ.
+- gpio-controller: Marks the port as GPIO controller.
+
+Optional properties:
+- interrupt-controller: Empty boolean property which marks the GPIO
+ module as an IRQ controller.
+- #interrupt-cells: Should be two. Defines the number of integer
+ cells required to specify an interrupt within
+ this interrupt controller. The first cell
+ defines the pin number, the second cell
+ defines additional flags (trigger type,
+ trigger polarity). Note that the available
+ set of trigger conditions supported by the
+ GPIO module depends on the actual SoC.
Example of gpio-controller nodes for a MPC8347 SoC:
@@ -22,39 +48,27 @@ Example of gpio-controller nodes for a MPC8347 SoC:
#gpio-cells = <2>;
compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio";
reg = <0xc00 0x100>;
- interrupts = <74 0x8>;
interrupt-parent = <&ipic>;
+ interrupts = <74 0x8>;
gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
};
gpio2: gpio-controller@d00 {
#gpio-cells = <2>;
compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio";
reg = <0xd00 0x100>;
- interrupts = <75 0x8>;
interrupt-parent = <&ipic>;
+ interrupts = <75 0x8>;
gpio-controller;
};
-See booting-without-of.txt for details of how to specify GPIO
-information for devices.
-
-To use GPIO pins as interrupt sources for peripherals, specify the
-GPIO controller as the interrupt parent and define GPIO number +
-trigger mode using the interrupts property, which is defined like
-this:
-
-interrupts = <number trigger>, where:
- - number: GPIO pin (0..31)
- - trigger: trigger mode:
- 2 = trigger on falling edge
- 3 = trigger on both edges
-
-Example of device using this is:
+Example of a peripheral using the GPIO module as an IRQ controller:
funkyfpga@0 {
compatible = "funky-fpga";
...
- interrupts = <4 3>;
interrupt-parent = <&gpio1>;
+ interrupts = <4 3>;
};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-omap.txt b/Documentation/devicetree/bindings/i2c/i2c-omap.txt
index 56564aa4b444..7e49839d4124 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-omap.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-omap.txt
@@ -1,7 +1,8 @@
I2C for OMAP platforms
Required properties :
-- compatible : Must be "ti,omap3-i2c" or "ti,omap4-i2c"
+- compatible : Must be "ti,omap2420-i2c", "ti,omap2430-i2c", "ti,omap3-i2c"
+ or "ti,omap4-i2c"
- ti,hwmods : Must be "i2c<n>", n being the instance number (1-based)
- #address-cells = <1>;
- #size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/mmc/ti-omap.txt b/Documentation/devicetree/bindings/mmc/ti-omap.txt
new file mode 100644
index 000000000000..8de579969763
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/ti-omap.txt
@@ -0,0 +1,54 @@
+* TI MMC host controller for OMAP1 and 2420
+
+The MMC Host Controller on TI OMAP1 and 2420 family provides
+an interface for MMC, SD, and SDIO types of memory cards.
+
+This file documents differences between the core properties described
+by mmc.txt and the properties used by the omap mmc driver.
+
+Note that this driver will not work with omap2430 or later omaps,
+please see the omap hsmmc driver for the current omaps.
+
+Required properties:
+- compatible: Must be "ti,omap2420-mmc", for OMAP2420 controllers
+- ti,hwmods: For 2420, must be "msdi<n>", where n is controller
+ instance starting 1
+
+Examples:
+
+ msdi1: mmc@4809c000 {
+ compatible = "ti,omap2420-mmc";
+ ti,hwmods = "msdi1";
+ reg = <0x4809c000 0x80>;
+ interrupts = <83>;
+ dmas = <&sdma 61 &sdma 62>;
+ dma-names = "tx", "rx";
+ };
+
+* TI MMC host controller for OMAP1 and 2420
+
+The MMC Host Controller on TI OMAP1 and 2420 family provides
+an interface for MMC, SD, and SDIO types of memory cards.
+
+This file documents differences between the core properties described
+by mmc.txt and the properties used by the omap mmc driver.
+
+Note that this driver will not work with omap2430 or later omaps,
+please see the omap hsmmc driver for the current omaps.
+
+Required properties:
+- compatible: Must be "ti,omap2420-mmc", for OMAP2420 controllers
+- ti,hwmods: For 2420, must be "msdi<n>", where n is controller
+ instance starting 1
+
+Examples:
+
+ msdi1: mmc@4809c000 {
+ compatible = "ti,omap2420-mmc";
+ ti,hwmods = "msdi1";
+ reg = <0x4809c000 0x80>;
+ interrupts = <83>;
+ dmas = <&sdma 61 &sdma 62>;
+ dma-names = "tx", "rx";
+ };
+
diff --git a/Documentation/devicetree/bindings/net/davinci_emac.txt b/Documentation/devicetree/bindings/net/davinci_emac.txt
index 48b259e29e87..bad381faf036 100644
--- a/Documentation/devicetree/bindings/net/davinci_emac.txt
+++ b/Documentation/devicetree/bindings/net/davinci_emac.txt
@@ -4,7 +4,7 @@ This file provides information, what the device node
for the davinci_emac interface contains.
Required properties:
-- compatible: "ti,davinci-dm6467-emac";
+- compatible: "ti,davinci-dm6467-emac" or "ti,am3517-emac"
- reg: Offset and length of the register set for the device
- ti,davinci-ctrl-reg-offset: offset to control register
- ti,davinci-ctrl-mod-reg-offset: offset to control module register
diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt
index d53639221403..845ff848d895 100644
--- a/Documentation/devicetree/bindings/net/fsl-fec.txt
+++ b/Documentation/devicetree/bindings/net/fsl-fec.txt
@@ -15,6 +15,7 @@ Optional properties:
only if property "phy-reset-gpios" is available. Missing the property
will have the duration be 1 millisecond. Numbers greater than 1000 are
invalid and 1 millisecond will be used instead.
+- phy-supply: regulator that powers the Ethernet PHY.
Example:
@@ -25,4 +26,5 @@ ethernet@83fec000 {
phy-mode = "mii";
phy-reset-gpios = <&gpio2 14 0>; /* GPIO2_14 */
local-mac-address = [00 04 9F 01 1B B9];
+ phy-supply = <&reg_fec_supply>;
};
diff --git a/Documentation/devicetree/bindings/net/smsc-lan91c111.txt b/Documentation/devicetree/bindings/net/smsc-lan91c111.txt
index 953049b4248a..5a41a8658daa 100644
--- a/Documentation/devicetree/bindings/net/smsc-lan91c111.txt
+++ b/Documentation/devicetree/bindings/net/smsc-lan91c111.txt
@@ -8,3 +8,7 @@ Required properties:
Optional properties:
- phy-device : phandle to Ethernet phy
- local-mac-address : Ethernet mac address to use
+- reg-io-width : Mask of sizes (in bytes) of the IO accesses that
+ are supported on the device. Valid value for SMSC LAN91c111 are
+ 1, 2 or 4. If it's omitted or invalid, the size would be 2 meaning
+ 16-bit access only.
diff --git a/Documentation/devicetree/bindings/rng/qcom,prng.txt b/Documentation/devicetree/bindings/rng/qcom,prng.txt
new file mode 100644
index 000000000000..8e5853c2879b
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/qcom,prng.txt
@@ -0,0 +1,17 @@
+Qualcomm MSM pseudo random number generator.
+
+Required properties:
+
+- compatible : should be "qcom,prng"
+- reg : specifies base physical address and size of the registers map
+- clocks : phandle to clock-controller plus clock-specifier pair
+- clock-names : "core" clocks all registers, FIFO and circuits in PRNG IP block
+
+Example:
+
+ rng@f9bff000 {
+ compatible = "qcom,prng";
+ reg = <0xf9bff000 0x200>;
+ clocks = <&clock GCC_PRNG_AHB_CLK>;
+ clock-names = "core";
+ };
diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra20-spi.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra20-spi.txt
deleted file mode 100644
index 6b9e51896693..000000000000
--- a/Documentation/devicetree/bindings/spi/nvidia,tegra20-spi.txt
+++ /dev/null
@@ -1,5 +0,0 @@
-NVIDIA Tegra 2 SPI device
-
-Required properties:
-- compatible : should be "nvidia,tegra20-spi".
-- gpios : should specify GPIOs used for chipselect.
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index ce95ed1c6d3e..edbb8d88c85e 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -32,12 +32,14 @@ est ESTeem Wireless Modems
fsl Freescale Semiconductor
GEFanuc GE Fanuc Intelligent Platforms Embedded Systems, Inc.
gef GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+gmt Global Mixed-mode Technology, Inc.
hisilicon Hisilicon Limited.
hp Hewlett Packard
ibm International Business Machines (IBM)
idt Integrated Device Technologies, Inc.
img Imagination Technologies Ltd.
intercontrol Inter Control Group
+lg LG Corporation
linux Linux-specific binding
lsi LSI Corp. (LSI Logic)
marvell Marvell Technology Group Ltd.
diff --git a/Documentation/gpio/00-INDEX b/Documentation/gpio/00-INDEX
new file mode 100644
index 000000000000..1de43ae46ae6
--- /dev/null
+++ b/Documentation/gpio/00-INDEX
@@ -0,0 +1,14 @@
+00-INDEX
+ - This file
+gpio.txt
+ - Introduction to GPIOs and their kernel interfaces
+consumer.txt
+ - How to obtain and use GPIOs in a driver
+driver.txt
+ - How to write a GPIO driver
+board.txt
+ - How to assign GPIOs to a consumer device and a function
+sysfs.txt
+ - Information about the GPIO sysfs interface
+gpio-legacy.txt
+ - Historical documentation of the deprecated GPIO integer interface
diff --git a/Documentation/gpio/board.txt b/Documentation/gpio/board.txt
new file mode 100644
index 000000000000..0d03506f2cc5
--- /dev/null
+++ b/Documentation/gpio/board.txt
@@ -0,0 +1,115 @@
+GPIO Mappings
+=============
+
+This document explains how GPIOs can be assigned to given devices and functions.
+Note that it only applies to the new descriptor-based interface. For a
+description of the deprecated integer-based GPIO interface please refer to
+gpio-legacy.txt (actually, there is no real mapping possible with the old
+interface; you just fetch an integer from somewhere and request the
+corresponding GPIO.
+
+Platforms that make use of GPIOs must select ARCH_REQUIRE_GPIOLIB (if GPIO usage
+is mandatory) or ARCH_WANT_OPTIONAL_GPIOLIB (if GPIO support can be omitted) in
+their Kconfig. Then, how GPIOs are mapped depends on what the platform uses to
+describe its hardware layout. Currently, mappings can be defined through device
+tree, ACPI, and platform data.
+
+Device Tree
+-----------
+GPIOs can easily be mapped to devices and functions in the device tree. The
+exact way to do it depends on the GPIO controller providing the GPIOs, see the
+device tree bindings for your controller.
+
+GPIOs mappings are defined in the consumer device's node, in a property named
+<function>-gpios, where <function> is the function the driver will request
+through gpiod_get(). For example:
+
+ foo_device {
+ compatible = "acme,foo";
+ ...
+ led-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>, /* red */
+ <&gpio 16 GPIO_ACTIVE_HIGH>, /* green */
+ <&gpio 17 GPIO_ACTIVE_HIGH>; /* blue */
+
+ power-gpio = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+This property will make GPIOs 15, 16 and 17 available to the driver under the
+"led" function, and GPIO 1 as the "power" GPIO:
+
+ struct gpio_desc *red, *green, *blue, *power;
+
+ red = gpiod_get_index(dev, "led", 0);
+ green = gpiod_get_index(dev, "led", 1);
+ blue = gpiod_get_index(dev, "led", 2);
+
+ power = gpiod_get(dev, "power");
+
+The led GPIOs will be active-high, while the power GPIO will be active-low (i.e.
+gpiod_is_active_low(power) will be true).
+
+ACPI
+----
+ACPI does not support function names for GPIOs. Therefore, only the "idx"
+argument of gpiod_get_index() is useful to discriminate between GPIOs assigned
+to a device. The "con_id" argument can still be set for debugging purposes (it
+will appear under error messages as well as debug and sysfs nodes).
+
+Platform Data
+-------------
+Finally, GPIOs can be bound to devices and functions using platform data. Board
+files that desire to do so need to include the following header:
+
+ #include <linux/gpio/driver.h>
+
+GPIOs are mapped by the means of tables of lookups, containing instances of the
+gpiod_lookup structure. Two macros are defined to help declaring such mappings:
+
+ GPIO_LOOKUP(chip_label, chip_hwnum, dev_id, con_id, flags)
+ GPIO_LOOKUP_IDX(chip_label, chip_hwnum, dev_id, con_id, idx, flags)
+
+where
+
+ - chip_label is the label of the gpiod_chip instance providing the GPIO
+ - chip_hwnum is the hardware number of the GPIO within the chip
+ - dev_id is the identifier of the device that will make use of this GPIO. If
+ NULL, the GPIO will be available to all devices.
+ - con_id is the name of the GPIO function from the device point of view. It
+ can be NULL.
+ - idx is the index of the GPIO within the function.
+ - flags is defined to specify the following properties:
+ * GPIOF_ACTIVE_LOW - to configure the GPIO as active-low
+ * GPIOF_OPEN_DRAIN - GPIO pin is open drain type.
+ * GPIOF_OPEN_SOURCE - GPIO pin is open source type.
+
+In the future, these flags might be extended to support more properties.
+
+Note that GPIO_LOOKUP() is just a shortcut to GPIO_LOOKUP_IDX() where idx = 0.
+
+A lookup table can then be defined as follows:
+
+ struct gpiod_lookup gpios_table[] = {
+ GPIO_LOOKUP_IDX("gpio.0", 15, "foo.0", "led", 0, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("gpio.0", 16, "foo.0", "led", 1, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("gpio.0", 17, "foo.0", "led", 2, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("gpio.0", 1, "foo.0", "power", GPIO_ACTIVE_LOW),
+ };
+
+And the table can be added by the board code as follows:
+
+ gpiod_add_table(gpios_table, ARRAY_SIZE(gpios_table));
+
+The driver controlling "foo.0" will then be able to obtain its GPIOs as follows:
+
+ struct gpio_desc *red, *green, *blue, *power;
+
+ red = gpiod_get_index(dev, "led", 0);
+ green = gpiod_get_index(dev, "led", 1);
+ blue = gpiod_get_index(dev, "led", 2);
+
+ power = gpiod_get(dev, "power");
+ gpiod_direction_output(power, 1);
+
+Since the "power" GPIO is mapped as active-low, its actual signal will be 0
+after this code. Contrary to the legacy integer GPIO interface, the active-low
+property is handled during mapping and is thus transparent to GPIO consumers.
diff --git a/Documentation/gpio/consumer.txt b/Documentation/gpio/consumer.txt
new file mode 100644
index 000000000000..07c74a3765a0
--- /dev/null
+++ b/Documentation/gpio/consumer.txt
@@ -0,0 +1,197 @@
+GPIO Descriptor Consumer Interface
+==================================
+
+This document describes the consumer interface of the GPIO framework. Note that
+it describes the new descriptor-based interface. For a description of the
+deprecated integer-based GPIO interface please refer to gpio-legacy.txt.
+
+
+Guidelines for GPIOs consumers
+==============================
+
+Drivers that can't work without standard GPIO calls should have Kconfig entries
+that depend on GPIOLIB. The functions that allow a driver to obtain and use
+GPIOs are available by including the following file:
+
+ #include <linux/gpio/consumer.h>
+
+All the functions that work with the descriptor-based GPIO interface are
+prefixed with gpiod_. The gpio_ prefix is used for the legacy interface. No
+other function in the kernel should use these prefixes.
+
+
+Obtaining and Disposing GPIOs
+=============================
+
+With the descriptor-based interface, GPIOs are identified with an opaque,
+non-forgeable handler that must be obtained through a call to one of the
+gpiod_get() functions. Like many other kernel subsystems, gpiod_get() takes the
+device that will use the GPIO and the function the requested GPIO is supposed to
+fulfill:
+
+ struct gpio_desc *gpiod_get(struct device *dev, const char *con_id)
+
+If a function is implemented by using several GPIOs together (e.g. a simple LED
+device that displays digits), an additional index argument can be specified:
+
+ struct gpio_desc *gpiod_get_index(struct device *dev,
+ const char *con_id, unsigned int idx)
+
+Both functions return either a valid GPIO descriptor, or an error code checkable
+with IS_ERR(). They will never return a NULL pointer.
+
+Device-managed variants of these functions are also defined:
+
+ struct gpio_desc *devm_gpiod_get(struct device *dev, const char *con_id)
+
+ struct gpio_desc *devm_gpiod_get_index(struct device *dev,
+ const char *con_id,
+ unsigned int idx)
+
+A GPIO descriptor can be disposed of using the gpiod_put() function:
+
+ void gpiod_put(struct gpio_desc *desc)
+
+It is strictly forbidden to use a descriptor after calling this function. The
+device-managed variant is, unsurprisingly:
+
+ void devm_gpiod_put(struct device *dev, struct gpio_desc *desc)
+
+
+Using GPIOs
+===========
+
+Setting Direction
+-----------------
+The first thing a driver must do with a GPIO is setting its direction. This is
+done by invoking one of the gpiod_direction_*() functions:
+
+ int gpiod_direction_input(struct gpio_desc *desc)
+ int gpiod_direction_output(struct gpio_desc *desc, int value)
+
+The return value is zero for success, else a negative errno. It should be
+checked, since the get/set calls don't return errors and since misconfiguration
+is possible. You should normally issue these calls from a task context. However,
+for spinlock-safe GPIOs it is OK to use them before tasking is enabled, as part
+of early board setup.
+
+For output GPIOs, the value provided becomes the initial output value. This
+helps avoid signal glitching during system startup.
+
+A driver can also query the current direction of a GPIO:
+
+ int gpiod_get_direction(const struct gpio_desc *desc)
+
+This function will return either GPIOF_DIR_IN or GPIOF_DIR_OUT.
+
+Be aware that there is no default direction for GPIOs. Therefore, **using a GPIO
+without setting its direction first is illegal and will result in undefined
+behavior!**
+
+
+Spinlock-Safe GPIO Access
+-------------------------
+Most GPIO controllers can be accessed with memory read/write instructions. Those
+don't need to sleep, and can safely be done from inside hard (non-threaded) IRQ
+handlers and similar contexts.
+
+Use the following calls to access GPIOs from an atomic context:
+
+ int gpiod_get_value(const struct gpio_desc *desc);
+ void gpiod_set_value(struct gpio_desc *desc, int value);
+
+The values are boolean, zero for low, nonzero for high. When reading the value
+of an output pin, the value returned should be what's seen on the pin. That
+won't always match the specified output value, because of issues including
+open-drain signaling and output latencies.
+
+The get/set calls do not return errors because "invalid GPIO" should have been
+reported earlier from gpiod_direction_*(). However, note that not all platforms
+can read the value of output pins; those that can't should always return zero.
+Also, using these calls for GPIOs that can't safely be accessed without sleeping
+(see below) is an error.
+
+
+GPIO Access That May Sleep
+--------------------------
+Some GPIO controllers must be accessed using message based buses like I2C or
+SPI. Commands to read or write those GPIO values require waiting to get to the
+head of a queue to transmit a command and get its response. This requires
+sleeping, which can't be done from inside IRQ handlers.
+
+Platforms that support this type of GPIO distinguish them from other GPIOs by
+returning nonzero from this call:
+
+ int gpiod_cansleep(const struct gpio_desc *desc)
+
+To access such GPIOs, a different set of accessors is defined:
+
+ int gpiod_get_value_cansleep(const struct gpio_desc *desc)
+ void gpiod_set_value_cansleep(struct gpio_desc *desc, int value)
+
+Accessing such GPIOs requires a context which may sleep, for example a threaded
+IRQ handler, and those accessors must be used instead of spinlock-safe
+accessors without the cansleep() name suffix.
+
+Other than the fact that these accessors might sleep, and will work on GPIOs
+that can't be accessed from hardIRQ handlers, these calls act the same as the
+spinlock-safe calls.
+
+
+Active-low State and Raw GPIO Values
+------------------------------------
+Device drivers like to manage the logical state of a GPIO, i.e. the value their
+device will actually receive, no matter what lies between it and the GPIO line.
+In some cases, it might make sense to control the actual GPIO line value. The
+following set of calls ignore the active-low property of a GPIO and work on the
+raw line value:
+
+ int gpiod_get_raw_value(const struct gpio_desc *desc)
+ void gpiod_set_raw_value(struct gpio_desc *desc, int value)
+ int gpiod_get_raw_value_cansleep(const struct gpio_desc *desc)
+ void gpiod_set_raw_value_cansleep(struct gpio_desc *desc, int value)
+
+The active-low state of a GPIO can also be queried using the following call:
+
+ int gpiod_is_active_low(const struct gpio_desc *desc)
+
+Note that these functions should only be used with great moderation ; a driver
+should not have to care about the physical line level.
+
+GPIOs mapped to IRQs
+--------------------
+GPIO lines can quite often be used as IRQs. You can get the IRQ number
+corresponding to a given GPIO using the following call:
+
+ int gpiod_to_irq(const struct gpio_desc *desc)
+
+It will return an IRQ number, or an negative errno code if the mapping can't be
+done (most likely because that particular GPIO cannot be used as IRQ). It is an
+unchecked error to use a GPIO that wasn't set up as an input using
+gpiod_direction_input(), or to use an IRQ number that didn't originally come
+from gpiod_to_irq(). gpiod_to_irq() is not allowed to sleep.
+
+Non-error values returned from gpiod_to_irq() can be passed to request_irq() or
+free_irq(). They will often be stored into IRQ resources for platform devices,
+by the board-specific initialization code. Note that IRQ trigger options are
+part of the IRQ interface, e.g. IRQF_TRIGGER_FALLING, as are system wakeup
+capabilities.
+
+
+Interacting With the Legacy GPIO Subsystem
+==========================================
+Many kernel subsystems still handle GPIOs using the legacy integer-based
+interface. Although it is strongly encouraged to upgrade them to the safer
+descriptor-based API, the following two functions allow you to convert a GPIO
+descriptor into the GPIO integer namespace and vice-versa:
+
+ int desc_to_gpio(const struct gpio_desc *desc)
+ struct gpio_desc *gpio_to_desc(unsigned gpio)
+
+The GPIO number returned by desc_to_gpio() can be safely used as long as the
+GPIO descriptor has not been freed. All the same, a GPIO number passed to
+gpio_to_desc() must have been properly acquired, and usage of the returned GPIO
+descriptor is only possible after the GPIO number has been released.
+
+Freeing a GPIO obtained by one API with the other API is forbidden and an
+unchecked error.
diff --git a/Documentation/gpio/driver.txt b/Documentation/gpio/driver.txt
new file mode 100644
index 000000000000..9da0bfa74781
--- /dev/null
+++ b/Documentation/gpio/driver.txt
@@ -0,0 +1,75 @@
+GPIO Descriptor Driver Interface
+================================
+
+This document serves as a guide for GPIO chip drivers writers. Note that it
+describes the new descriptor-based interface. For a description of the
+deprecated integer-based GPIO interface please refer to gpio-legacy.txt.
+
+Each GPIO controller driver needs to include the following header, which defines
+the structures used to define a GPIO driver:
+
+ #include <linux/gpio/driver.h>
+
+
+Internal Representation of GPIOs
+================================
+
+Inside a GPIO driver, individual GPIOs are identified by their hardware number,
+which is a unique number between 0 and n, n being the number of GPIOs managed by
+the chip. This number is purely internal: the hardware number of a particular
+GPIO descriptor is never made visible outside of the driver.
+
+On top of this internal number, each GPIO also need to have a global number in
+the integer GPIO namespace so that it can be used with the legacy GPIO
+interface. Each chip must thus have a "base" number (which can be automatically
+assigned), and for each GPIO the global number will be (base + hardware number).
+Although the integer representation is considered deprecated, it still has many
+users and thus needs to be maintained.
+
+So for example one platform could use numbers 32-159 for GPIOs, with a
+controller defining 128 GPIOs at a "base" of 32 ; while another platform uses
+numbers 0..63 with one set of GPIO controllers, 64-79 with another type of GPIO
+controller, and on one particular board 80-95 with an FPGA. The numbers need not
+be contiguous; either of those platforms could also use numbers 2000-2063 to
+identify GPIOs in a bank of I2C GPIO expanders.
+
+
+Controller Drivers: gpio_chip
+=============================
+
+In the gpiolib framework each GPIO controller is packaged as a "struct
+gpio_chip" (see linux/gpio/driver.h for its complete definition) with members
+common to each controller of that type:
+
+ - methods to establish GPIO direction
+ - methods used to access GPIO values
+ - method to return the IRQ number associated to a given GPIO
+ - flag saying whether calls to its methods may sleep
+ - optional debugfs dump method (showing extra state like pullup config)
+ - optional base number (will be automatically assigned if omitted)
+ - label for diagnostics and GPIOs mapping using platform data
+
+The code implementing a gpio_chip should support multiple instances of the
+controller, possibly using the driver model. That code will configure each
+gpio_chip and issue gpiochip_add(). Removing a GPIO controller should be rare;
+use gpiochip_remove() when it is unavoidable.
+
+Most often a gpio_chip is part of an instance-specific structure with state not
+exposed by the GPIO interfaces, such as addressing, power management, and more.
+Chips such as codecs will have complex non-GPIO state.
+
+Any debugfs dump method should normally ignore signals which haven't been
+requested as GPIOs. They can use gpiochip_is_requested(), which returns either
+NULL or the label associated with that GPIO when it was requested.
+
+Locking IRQ usage
+-----------------
+Input GPIOs can be used as IRQ signals. When this happens, a driver is requested
+to mark the GPIO as being used as an IRQ:
+
+ int gpiod_lock_as_irq(struct gpio_desc *desc)
+
+This will prevent the use of non-irq related GPIO APIs until the GPIO IRQ lock
+is released:
+
+ void gpiod_unlock_as_irq(struct gpio_desc *desc)
diff --git a/Documentation/gpio.txt b/Documentation/gpio/gpio-legacy.txt
index 6f83fa965b4b..6f83fa965b4b 100644
--- a/Documentation/gpio.txt
+++ b/Documentation/gpio/gpio-legacy.txt
diff --git a/Documentation/gpio/gpio.txt b/Documentation/gpio/gpio.txt
new file mode 100644
index 000000000000..cd9b356e88cd
--- /dev/null
+++ b/Documentation/gpio/gpio.txt
@@ -0,0 +1,119 @@
+GPIO Interfaces
+===============
+
+The documents in this directory give detailed instructions on how to access
+GPIOs in drivers, and how to write a driver for a device that provides GPIOs
+itself.
+
+Due to the history of GPIO interfaces in the kernel, there are two different
+ways to obtain and use GPIOs:
+
+ - The descriptor-based interface is the preferred way to manipulate GPIOs,
+and is described by all the files in this directory excepted gpio-legacy.txt.
+ - The legacy integer-based interface which is considered deprecated (but still
+usable for compatibility reasons) is documented in gpio-legacy.txt.
+
+The remainder of this document applies to the new descriptor-based interface.
+gpio-legacy.txt contains the same information applied to the legacy
+integer-based interface.
+
+
+What is a GPIO?
+===============
+
+A "General Purpose Input/Output" (GPIO) is a flexible software-controlled
+digital signal. They are provided from many kinds of chip, and are familiar
+to Linux developers working with embedded and custom hardware. Each GPIO
+represents a bit connected to a particular pin, or "ball" on Ball Grid Array
+(BGA) packages. Board schematics show which external hardware connects to
+which GPIOs. Drivers can be written generically, so that board setup code
+passes such pin configuration data to drivers.
+
+System-on-Chip (SOC) processors heavily rely on GPIOs. In some cases, every
+non-dedicated pin can be configured as a GPIO; and most chips have at least
+several dozen of them. Programmable logic devices (like FPGAs) can easily
+provide GPIOs; multifunction chips like power managers, and audio codecs
+often have a few such pins to help with pin scarcity on SOCs; and there are
+also "GPIO Expander" chips that connect using the I2C or SPI serial buses.
+Most PC southbridges have a few dozen GPIO-capable pins (with only the BIOS
+firmware knowing how they're used).
+
+The exact capabilities of GPIOs vary between systems. Common options:
+
+ - Output values are writable (high=1, low=0). Some chips also have
+ options about how that value is driven, so that for example only one
+ value might be driven, supporting "wire-OR" and similar schemes for the
+ other value (notably, "open drain" signaling).
+
+ - Input values are likewise readable (1, 0). Some chips support readback
+ of pins configured as "output", which is very useful in such "wire-OR"
+ cases (to support bidirectional signaling). GPIO controllers may have
+ input de-glitch/debounce logic, sometimes with software controls.
+
+ - Inputs can often be used as IRQ signals, often edge triggered but
+ sometimes level triggered. Such IRQs may be configurable as system
+ wakeup events, to wake the system from a low power state.
+
+ - Usually a GPIO will be configurable as either input or output, as needed
+ by different product boards; single direction ones exist too.
+
+ - Most GPIOs can be accessed while holding spinlocks, but those accessed
+ through a serial bus normally can't. Some systems support both types.
+
+On a given board each GPIO is used for one specific purpose like monitoring
+MMC/SD card insertion/removal, detecting card write-protect status, driving
+a LED, configuring a transceiver, bit-banging a serial bus, poking a hardware
+watchdog, sensing a switch, and so on.
+
+
+Common GPIO Properties
+======================
+
+These properties are met through all the other documents of the GPIO interface
+and it is useful to understand them, especially if you need to define GPIO
+mappings.
+
+Active-High and Active-Low
+--------------------------
+It is natural to assume that a GPIO is "active" when its output signal is 1
+("high"), and inactive when it is 0 ("low"). However in practice the signal of a
+GPIO may be inverted before is reaches its destination, or a device could decide
+to have different conventions about what "active" means. Such decisions should
+be transparent to device drivers, therefore it is possible to define a GPIO as
+being either active-high ("1" means "active", the default) or active-low ("0"
+means "active") so that drivers only need to worry about the logical signal and
+not about what happens at the line level.
+
+Open Drain and Open Source
+--------------------------
+Sometimes shared signals need to use "open drain" (where only the low signal
+level is actually driven), or "open source" (where only the high signal level is
+driven) signaling. That term applies to CMOS transistors; "open collector" is
+used for TTL. A pullup or pulldown resistor causes the high or low signal level.
+This is sometimes called a "wire-AND"; or more practically, from the negative
+logic (low=true) perspective this is a "wire-OR".
+
+One common example of an open drain signal is a shared active-low IRQ line.
+Also, bidirectional data bus signals sometimes use open drain signals.
+
+Some GPIO controllers directly support open drain and open source outputs; many
+don't. When you need open drain signaling but your hardware doesn't directly
+support it, there's a common idiom you can use to emulate it with any GPIO pin
+that can be used as either an input or an output:
+
+ LOW: gpiod_direction_output(gpio, 0) ... this drives the signal and overrides
+ the pullup.
+
+ HIGH: gpiod_direction_input(gpio) ... this turns off the output, so the pullup
+ (or some other device) controls the signal.
+
+The same logic can be applied to emulate open source signaling, by driving the
+high signal and configuring the GPIO as input for low. This open drain/open
+source emulation can be handled transparently by the GPIO framework.
+
+If you are "driving" the signal high but gpiod_get_value(gpio) reports a low
+value (after the appropriate rise time passes), you know some other component is
+driving the shared signal low. That's not necessarily an error. As one common
+example, that's how I2C clocks are stretched: a slave that needs a slower clock
+delays the rising edge of SCK, and the I2C master adjusts its signaling rate
+accordingly.
diff --git a/Documentation/gpio/sysfs.txt b/Documentation/gpio/sysfs.txt
new file mode 100644
index 000000000000..c2c3a97f8ff7
--- /dev/null
+++ b/Documentation/gpio/sysfs.txt
@@ -0,0 +1,155 @@
+GPIO Sysfs Interface for Userspace
+==================================
+
+Platforms which use the "gpiolib" implementors framework may choose to
+configure a sysfs user interface to GPIOs. This is different from the
+debugfs interface, since it provides control over GPIO direction and
+value instead of just showing a gpio state summary. Plus, it could be
+present on production systems without debugging support.
+
+Given appropriate hardware documentation for the system, userspace could
+know for example that GPIO #23 controls the write protect line used to
+protect boot loader segments in flash memory. System upgrade procedures
+may need to temporarily remove that protection, first importing a GPIO,
+then changing its output state, then updating the code before re-enabling
+the write protection. In normal use, GPIO #23 would never be touched,
+and the kernel would have no need to know about it.
+
+Again depending on appropriate hardware documentation, on some systems
+userspace GPIO can be used to determine system configuration data that
+standard kernels won't know about. And for some tasks, simple userspace
+GPIO drivers could be all that the system really needs.
+
+Note that standard kernel drivers exist for common "LEDs and Buttons"
+GPIO tasks: "leds-gpio" and "gpio_keys", respectively. Use those
+instead of talking directly to the GPIOs; they integrate with kernel
+frameworks better than your userspace code could.
+
+
+Paths in Sysfs
+--------------
+There are three kinds of entry in /sys/class/gpio:
+
+ - Control interfaces used to get userspace control over GPIOs;
+
+ - GPIOs themselves; and
+
+ - GPIO controllers ("gpio_chip" instances).
+
+That's in addition to standard files including the "device" symlink.
+
+The control interfaces are write-only:
+
+ /sys/class/gpio/
+
+ "export" ... Userspace may ask the kernel to export control of
+ a GPIO to userspace by writing its number to this file.
+
+ Example: "echo 19 > export" will create a "gpio19" node
+ for GPIO #19, if that's not requested by kernel code.
+
+ "unexport" ... Reverses the effect of exporting to userspace.
+
+ Example: "echo 19 > unexport" will remove a "gpio19"
+ node exported using the "export" file.
+
+GPIO signals have paths like /sys/class/gpio/gpio42/ (for GPIO #42)
+and have the following read/write attributes:
+
+ /sys/class/gpio/gpioN/
+
+ "direction" ... reads as either "in" or "out". This value may
+ normally be written. Writing as "out" defaults to
+ initializing the value as low. To ensure glitch free
+ operation, values "low" and "high" may be written to
+ configure the GPIO as an output with that initial value.
+
+ Note that this attribute *will not exist* if the kernel
+ doesn't support changing the direction of a GPIO, or
+ it was exported by kernel code that didn't explicitly
+ allow userspace to reconfigure this GPIO's direction.
+
+ "value" ... reads as either 0 (low) or 1 (high). If the GPIO
+ is configured as an output, this value may be written;
+ any nonzero value is treated as high.
+
+ If the pin can be configured as interrupt-generating interrupt
+ and if it has been configured to generate interrupts (see the
+ description of "edge"), you can poll(2) on that file and
+ poll(2) will return whenever the interrupt was triggered. If
+ you use poll(2), set the events POLLPRI and POLLERR. If you
+ use select(2), set the file descriptor in exceptfds. After
+ poll(2) returns, either lseek(2) to the beginning of the sysfs
+ file and read the new value or close the file and re-open it
+ to read the value.
+
+ "edge" ... reads as either "none", "rising", "falling", or
+ "both". Write these strings to select the signal edge(s)
+ that will make poll(2) on the "value" file return.
+
+ This file exists only if the pin can be configured as an
+ interrupt generating input pin.
+
+ "active_low" ... reads as either 0 (false) or 1 (true). Write
+ any nonzero value to invert the value attribute both
+ for reading and writing. Existing and subsequent
+ poll(2) support configuration via the edge attribute
+ for "rising" and "falling" edges will follow this
+ setting.
+
+GPIO controllers have paths like /sys/class/gpio/gpiochip42/ (for the
+controller implementing GPIOs starting at #42) and have the following
+read-only attributes:
+
+ /sys/class/gpio/gpiochipN/
+
+ "base" ... same as N, the first GPIO managed by this chip
+
+ "label" ... provided for diagnostics (not always unique)
+
+ "ngpio" ... how many GPIOs this manges (N to N + ngpio - 1)
+
+Board documentation should in most cases cover what GPIOs are used for
+what purposes. However, those numbers are not always stable; GPIOs on
+a daughtercard might be different depending on the base board being used,
+or other cards in the stack. In such cases, you may need to use the
+gpiochip nodes (possibly in conjunction with schematics) to determine
+the correct GPIO number to use for a given signal.
+
+
+Exporting from Kernel code
+--------------------------
+Kernel code can explicitly manage exports of GPIOs which have already been
+requested using gpio_request():
+
+ /* export the GPIO to userspace */
+ int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
+
+ /* reverse gpio_export() */
+ void gpiod_unexport(struct gpio_desc *desc);
+
+ /* create a sysfs link to an exported GPIO node */
+ int gpiod_export_link(struct device *dev, const char *name,
+ struct gpio_desc *desc);
+
+ /* change the polarity of a GPIO node in sysfs */
+ int gpiod_sysfs_set_active_low(struct gpio_desc *desc, int value);
+
+After a kernel driver requests a GPIO, it may only be made available in
+the sysfs interface by gpiod_export(). The driver can control whether the
+signal direction may change. This helps drivers prevent userspace code
+from accidentally clobbering important system state.
+
+This explicit exporting can help with debugging (by making some kinds
+of experiments easier), or can provide an always-there interface that's
+suitable for documenting as part of a board support package.
+
+After the GPIO has been exported, gpiod_export_link() allows creating
+symlinks from elsewhere in sysfs to the GPIO sysfs node. Drivers can
+use this to provide the interface under their own device in sysfs with
+a descriptive name.
+
+Drivers can use gpiod_sysfs_set_active_low() to hide GPIO line polarity
+differences between boards from user space. Polarity change can be done both
+before and after gpiod_export(), and previously enabled poll(2) support for
+either rising or falling edge will be reconfigured to follow this setting.
diff --git a/Documentation/mic/mpssd/mpssd.c b/Documentation/mic/mpssd/mpssd.c
index 0c980ad40b17..4d17487d5ad9 100644
--- a/Documentation/mic/mpssd/mpssd.c
+++ b/Documentation/mic/mpssd/mpssd.c
@@ -313,7 +313,7 @@ static struct mic_device_desc *get_device_desc(struct mic_info *mic, int type)
int i;
void *dp = get_dp(mic, type);
- for (i = mic_aligned_size(struct mic_bootparam); i < PAGE_SIZE;
+ for (i = sizeof(struct mic_bootparam); i < PAGE_SIZE;
i += mic_total_desc_size(d)) {
d = dp + i;
@@ -445,8 +445,8 @@ init_vr(struct mic_info *mic, int fd, int type,
__func__, mic->name, vr0->va, vr0->info, vr_size,
vring_size(MIC_VRING_ENTRIES, MIC_VIRTIO_RING_ALIGN));
mpsslog("magic 0x%x expected 0x%x\n",
- vr0->info->magic, MIC_MAGIC + type);
- assert(vr0->info->magic == MIC_MAGIC + type);
+ le32toh(vr0->info->magic), MIC_MAGIC + type);
+ assert(le32toh(vr0->info->magic) == MIC_MAGIC + type);
if (vr1) {
vr1->va = (struct mic_vring *)
&va[MIC_DEVICE_PAGE_END + vr_size];
@@ -458,8 +458,8 @@ init_vr(struct mic_info *mic, int fd, int type,
__func__, mic->name, vr1->va, vr1->info, vr_size,
vring_size(MIC_VRING_ENTRIES, MIC_VIRTIO_RING_ALIGN));
mpsslog("magic 0x%x expected 0x%x\n",
- vr1->info->magic, MIC_MAGIC + type + 1);
- assert(vr1->info->magic == MIC_MAGIC + type + 1);
+ le32toh(vr1->info->magic), MIC_MAGIC + type + 1);
+ assert(le32toh(vr1->info->magic) == MIC_MAGIC + type + 1);
}
done:
return va;
@@ -520,7 +520,7 @@ static void *
virtio_net(void *arg)
{
static __u8 vnet_hdr[2][sizeof(struct virtio_net_hdr)];
- static __u8 vnet_buf[2][MAX_NET_PKT_SIZE] __aligned(64);
+ static __u8 vnet_buf[2][MAX_NET_PKT_SIZE] __attribute__ ((aligned(64)));
struct iovec vnet_iov[2][2] = {
{ { .iov_base = vnet_hdr[0], .iov_len = sizeof(vnet_hdr[0]) },
{ .iov_base = vnet_buf[0], .iov_len = sizeof(vnet_buf[0]) } },
@@ -1412,6 +1412,12 @@ mic_config(void *arg)
}
do {
+ ret = lseek(fd, 0, SEEK_SET);
+ if (ret < 0) {
+ mpsslog("%s: Failed to seek to file start '%s': %s\n",
+ mic->name, pathname, strerror(errno));
+ goto close_error1;
+ }
ret = read(fd, value, sizeof(value));
if (ret < 0) {
mpsslog("%s: Failed to read sysfs entry '%s': %s\n",
diff --git a/Documentation/networking/packet_mmap.txt b/Documentation/networking/packet_mmap.txt
index c01223628a87..8e48e3b14227 100644
--- a/Documentation/networking/packet_mmap.txt
+++ b/Documentation/networking/packet_mmap.txt
@@ -123,6 +123,16 @@ Transmission process is similar to capture as shown below.
[shutdown] close() --------> destruction of the transmission socket and
deallocation of all associated resources.
+Socket creation and destruction is also straight forward, and is done
+the same way as in capturing described in the previous paragraph:
+
+ int fd = socket(PF_PACKET, mode, 0);
+
+The protocol can optionally be 0 in case we only want to transmit
+via this socket, which avoids an expensive call to packet_rcv().
+In this case, you also need to bind(2) the TX_RING with sll_protocol = 0
+set. Otherwise, htons(ETH_P_ALL) or any other protocol, for example.
+
Binding the socket to your network interface is mandatory (with zero copy) to
know the header size of frames used in the circular buffer.
diff --git a/MAINTAINERS b/MAINTAINERS
index 8285ed4676b6..1344816c4c06 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -893,20 +893,15 @@ F: arch/arm/include/asm/hardware/dec21285.h
F: arch/arm/mach-footbridge/
ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
+M: Shawn Guo <shawn.guo@linaro.org>
M: Sascha Hauer <kernel@pengutronix.de>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
-T: git git://git.pengutronix.de/git/imx/linux-2.6.git
+T: git git://git.linaro.org/people/shawnguo/linux-2.6.git
F: arch/arm/mach-imx/
+F: arch/arm/boot/dts/imx*
F: arch/arm/configs/imx*_defconfig
-ARM/FREESCALE IMX6
-M: Shawn Guo <shawn.guo@linaro.org>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Maintained
-T: git git://git.linaro.org/people/shawnguo/linux-2.6.git
-F: arch/arm/mach-imx/*imx6*
-
ARM/FREESCALE MXS ARM ARCHITECTURE
M: Shawn Guo <shawn.guo@linaro.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1934,7 +1929,8 @@ S: Maintained
F: drivers/gpio/gpio-bt8xx.c
BTRFS FILE SYSTEM
-M: Chris Mason <chris.mason@fusionio.com>
+M: Chris Mason <clm@fb.com>
+M: Josef Bacik <jbacik@fb.com>
L: linux-btrfs@vger.kernel.org
W: http://btrfs.wiki.kernel.org/
Q: http://patchwork.kernel.org/project/linux-btrfs/list/
@@ -2137,11 +2133,17 @@ S: Maintained
F: Documentation/zh_CN/
CHIPIDEA USB HIGH SPEED DUAL ROLE CONTROLLER
-M: Alexander Shishkin <alexander.shishkin@linux.intel.com>
+M: Peter Chen <Peter.Chen@freescale.com>
+T: git://github.com/hzpeterchen/linux-usb.git
L: linux-usb@vger.kernel.org
S: Maintained
F: drivers/usb/chipidea/
+CHROME HARDWARE PLATFORM SUPPORT
+M: Olof Johansson <olof@lixom.net>
+S: Maintained
+F: drivers/platform/chrome/
+
CISCO VIC ETHERNET NIC DRIVER
M: Christian Benvenuti <benve@cisco.com>
M: Sujith Sankar <ssujith@cisco.com>
@@ -4038,12 +4040,26 @@ W: http://artax.karlin.mff.cuni.cz/~mikulas/vyplody/hpfs/index-e.cgi
S: Maintained
F: fs/hpfs/
+HSI SUBSYSTEM
+M: Sebastian Reichel <sre@debian.org>
+S: Maintained
+F: Documentation/ABI/testing/sysfs-bus-hsi
+F: drivers/hsi/
+F: include/linux/hsi/
+F: include/uapi/linux/hsi/
+
HSO 3G MODEM DRIVER
M: Jan Dumon <j.dumon@option.com>
W: http://www.pharscape.org
S: Maintained
F: drivers/net/usb/hso.c
+HSR NETWORK PROTOCOL
+M: Arvid Brodin <arvid.brodin@alten.se>
+L: netdev@vger.kernel.org
+S: Maintained
+F: net/hsr/
+
HTCPEN TOUCHSCREEN DRIVER
M: Pau Oliva Fora <pof@eslack.org>
L: linux-input@vger.kernel.org
@@ -4450,10 +4466,8 @@ M: Bruce Allan <bruce.w.allan@intel.com>
M: Carolyn Wyborny <carolyn.wyborny@intel.com>
M: Don Skidmore <donald.c.skidmore@intel.com>
M: Greg Rose <gregory.v.rose@intel.com>
-M: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
M: Alex Duyck <alexander.h.duyck@intel.com>
M: John Ronciak <john.ronciak@intel.com>
-M: Tushar Dave <tushar.n.dave@intel.com>
L: e1000-devel@lists.sourceforge.net
W: http://www.intel.com/support/feedback.htm
W: http://e1000.sourceforge.net/
@@ -5256,7 +5270,7 @@ S: Maintained
F: Documentation/lockdep*.txt
F: Documentation/lockstat.txt
F: include/linux/lockdep.h
-F: kernel/lockdep*
+F: kernel/locking/
LOGICAL DISK MANAGER SUPPORT (LDM, Windows 2000/XP/Vista Dynamic Disks)
M: "Richard Russon (FlatCap)" <ldm@flatcap.org>
@@ -5968,10 +5982,10 @@ F: drivers/nfc/
F: include/linux/platform_data/pn544.h
NFS, SUNRPC, AND LOCKD CLIENTS
-M: Trond Myklebust <Trond.Myklebust@netapp.com>
+M: Trond Myklebust <trond.myklebust@primarydata.com>
L: linux-nfs@vger.kernel.org
W: http://client.linux-nfs.org
-T: git git://git.linux-nfs.org/pub/linux/nfs-2.6.git
+T: git git://git.linux-nfs.org/projects/trondmy/linux-nfs.git
S: Maintained
F: fs/lockd/
F: fs/nfs/
@@ -6238,8 +6252,8 @@ OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS
M: Rob Herring <rob.herring@calxeda.com>
M: Pawel Moll <pawel.moll@arm.com>
M: Mark Rutland <mark.rutland@arm.com>
-M: Stephen Warren <swarren@wwwdotorg.org>
M: Ian Campbell <ijc+devicetree@hellion.org.uk>
+M: Kumar Gala <galak@codeaurora.org>
L: devicetree@vger.kernel.org
S: Maintained
F: Documentation/devicetree/
@@ -6449,19 +6463,52 @@ F: drivers/pci/
F: include/linux/pci*
F: arch/x86/pci/
+PCI DRIVER FOR IMX6
+M: Richard Zhu <r65037@freescale.com>
+M: Shawn Guo <shawn.guo@linaro.org>
+L: linux-pci@vger.kernel.org
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+F: drivers/pci/host/*imx6*
+
+PCI DRIVER FOR MVEBU (Marvell Armada 370 and Armada XP SOC support)
+M: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+M: Jason Cooper <jason@lakedaemon.net>
+L: linux-pci@vger.kernel.org
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+F: drivers/pci/host/*mvebu*
+
PCI DRIVER FOR NVIDIA TEGRA
M: Thierry Reding <thierry.reding@gmail.com>
L: linux-tegra@vger.kernel.org
+L: linux-pci@vger.kernel.org
S: Supported
F: Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
F: drivers/pci/host/pci-tegra.c
+PCI DRIVER FOR RENESAS R-CAR
+M: Simon Horman <horms@verge.net.au>
+L: linux-pci@vger.kernel.org
+L: linux-sh@vger.kernel.org
+S: Maintained
+F: drivers/pci/host/*rcar*
+
PCI DRIVER FOR SAMSUNG EXYNOS
M: Jingoo Han <jg1.han@samsung.com>
L: linux-pci@vger.kernel.org
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
S: Maintained
F: drivers/pci/host/pci-exynos.c
+PCI DRIVER FOR SYNOPSIS DESIGNWARE
+M: Mohit Kumar <mohit.kumar@st.com>
+M: Jingoo Han <jg1.han@samsung.com>
+L: linux-pci@vger.kernel.org
+S: Maintained
+F: drivers/pci/host/*designware*
+
PCMCIA SUBSYSTEM
P: Linux PCMCIA Team
L: linux-pcmcia@lists.infradead.org
@@ -7380,7 +7427,6 @@ S: Maintained
F: kernel/sched/
F: include/linux/sched.h
F: include/uapi/linux/sched.h
-F: kernel/wait.c
F: include/linux/wait.h
SCORE ARCHITECTURE
diff --git a/Makefile b/Makefile
index c0c2d58e3998..858a147fd836 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 13
SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc4
NAME = One Giant Leap for Frogkind
# *DOCUMENTATION*
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index 2ee0c9bfd032..9063ae6553cc 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -8,6 +8,7 @@
config ARC
def_bool y
+ select BUILDTIME_EXTABLE_SORT
select CLONE_BACKWARDS
# ARC Busybox based initramfs absolutely relies on DEVTMPFS for /dev
select DEVTMPFS if !INITRAMFS_SOURCE=""
diff --git a/arch/arc/include/uapi/asm/unistd.h b/arch/arc/include/uapi/asm/unistd.h
index 6f30484f34b7..68125dd766c6 100644
--- a/arch/arc/include/uapi/asm/unistd.h
+++ b/arch/arc/include/uapi/asm/unistd.h
@@ -8,6 +8,9 @@
/******** no-legacy-syscalls-ABI *******/
+#ifndef _UAPI_ASM_ARC_UNISTD_H
+#define _UAPI_ASM_ARC_UNISTD_H
+
#define __ARCH_WANT_SYS_EXECVE
#define __ARCH_WANT_SYS_CLONE
#define __ARCH_WANT_SYS_VFORK
@@ -32,3 +35,5 @@ __SYSCALL(__NR_arc_gettls, sys_arc_gettls)
/* Generic syscall (fs/filesystems.c - lost in asm-generic/unistd.h */
#define __NR_sysfs (__NR_arch_specific_syscall + 3)
__SYSCALL(__NR_sysfs, sys_sysfs)
+
+#endif
diff --git a/arch/arc/kernel/perf_event.c b/arch/arc/kernel/perf_event.c
index e46d81f70979..63177e4cb66d 100644
--- a/arch/arc/kernel/perf_event.c
+++ b/arch/arc/kernel/perf_event.c
@@ -79,9 +79,9 @@ static int arc_pmu_cache_event(u64 config)
cache_result = (config >> 16) & 0xff;
if (cache_type >= PERF_COUNT_HW_CACHE_MAX)
return -EINVAL;
- if (cache_type >= PERF_COUNT_HW_CACHE_OP_MAX)
+ if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX)
return -EINVAL;
- if (cache_type >= PERF_COUNT_HW_CACHE_RESULT_MAX)
+ if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
return -EINVAL;
ret = arc_pmu_cache_map[cache_type][cache_op][cache_result];
diff --git a/arch/arm/boot/dts/am335x-base0033.dts b/arch/arm/boot/dts/am335x-base0033.dts
index b4f95c2bbf74..72a9b3fc4251 100644
--- a/arch/arm/boot/dts/am335x-base0033.dts
+++ b/arch/arm/boot/dts/am335x-base0033.dts
@@ -13,4 +13,83 @@
/ {
model = "IGEP COM AM335x on AQUILA Expansion";
compatible = "isee,am335x-base0033", "isee,am335x-igep0033", "ti,am33xx";
+
+ hdmi {
+ compatible = "ti,tilcdc,slave";
+ i2c = <&i2c0>;
+ pinctrl-names = "default", "off";
+ pinctrl-0 = <&nxp_hdmi_pins>;
+ pinctrl-1 = <&nxp_hdmi_off_pins>;
+ status = "okay";
+ };
+
+ leds_base {
+ pinctrl-names = "default";
+ pinctrl-0 = <&leds_base_pins>;
+
+ compatible = "gpio-leds";
+
+ led@0 {
+ label = "base:red:user";
+ gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; /* gpio1_21 */
+ default-state = "off";
+ };
+
+ led@1 {
+ label = "base:green:user";
+ gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>; /* gpio2_0 */
+ default-state = "off";
+ };
+ };
+};
+
+&am33xx_pinmux {
+ nxp_hdmi_pins: pinmux_nxp_hdmi_pins {
+ pinctrl-single,pins = <
+ 0x1b0 (PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */
+ 0xa0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data0 */
+ 0xa4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data1 */
+ 0xa8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data2 */
+ 0xac (PIN_OUTPUT | MUX_MODE0) /* lcd_data3 */
+ 0xb0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data4 */
+ 0xb4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data5 */
+ 0xb8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data6 */
+ 0xbc (PIN_OUTPUT | MUX_MODE0) /* lcd_data7 */
+ 0xc0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data8 */
+ 0xc4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data9 */
+ 0xc8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data10 */
+ 0xcc (PIN_OUTPUT | MUX_MODE0) /* lcd_data11 */
+ 0xd0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data12 */
+ 0xd4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data13 */
+ 0xd8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data14 */
+ 0xdc (PIN_OUTPUT | MUX_MODE0) /* lcd_data15 */
+ 0xe0 (PIN_OUTPUT | MUX_MODE0) /* lcd_vsync */
+ 0xe4 (PIN_OUTPUT | MUX_MODE0) /* lcd_hsync */
+ 0xe8 (PIN_OUTPUT | MUX_MODE0) /* lcd_pclk */
+ 0xec (PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en */
+ >;
+ };
+ nxp_hdmi_off_pins: pinmux_nxp_hdmi_off_pins {
+ pinctrl-single,pins = <
+ 0x1b0 (PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */
+ >;
+ };
+
+ leds_base_pins: pinmux_leds_base_pins {
+ pinctrl-single,pins = <
+ 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */
+ 0x88 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn3.gpio2_0 */
+ >;
+ };
+};
+
+&lcdc {
+ status = "okay";
+};
+
+&i2c0 {
+ eeprom: eeprom@50 {
+ compatible = "at,24c256";
+ reg = <0x50>;
+ };
};
diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi
index 619624479311..7063311a58d9 100644
--- a/arch/arm/boot/dts/am335x-igep0033.dtsi
+++ b/arch/arm/boot/dts/am335x-igep0033.dtsi
@@ -199,6 +199,35 @@
pinctrl-0 = <&uart0_pins>;
};
+&usb {
+ status = "okay";
+
+ control@44e10000 {
+ status = "okay";
+ };
+
+ usb-phy@47401300 {
+ status = "okay";
+ };
+
+ usb-phy@47401b00 {
+ status = "okay";
+ };
+
+ usb@47401000 {
+ status = "okay";
+ };
+
+ usb@47401800 {
+ status = "okay";
+ dr_mode = "host";
+ };
+
+ dma-controller@07402000 {
+ status = "okay";
+ };
+};
+
#include "tps65910.dtsi"
&tps {
diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts
index e99dfaf70052..03fcbf0a88a8 100644
--- a/arch/arm/boot/dts/am3517-evm.dts
+++ b/arch/arm/boot/dts/am3517-evm.dts
@@ -7,11 +7,11 @@
*/
/dts-v1/;
-#include "omap34xx.dtsi"
+#include "am3517.dtsi"
/ {
- model = "TI AM3517 EVM (AM3517/05)";
- compatible = "ti,am3517-evm", "ti,omap3";
+ model = "TI AM3517 EVM (AM3517/05 TMDSEVM3517)";
+ compatible = "ti,am3517-evm", "ti,am3517", "ti,omap3";
memory {
device_type = "memory";
diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi
new file mode 100644
index 000000000000..2fbe02faa8b1
--- /dev/null
+++ b/arch/arm/boot/dts/am3517.dtsi
@@ -0,0 +1,63 @@
+/*
+ * Device Tree Source for am3517 SoC
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include "omap3.dtsi"
+
+/ {
+ aliases {
+ serial3 = &uart4;
+ };
+
+ ocp {
+ am35x_otg_hs: am35x_otg_hs@5c040000 {
+ compatible = "ti,omap3-musb";
+ ti,hwmods = "am35x_otg_hs";
+ status = "disabled";
+ reg = <0x5c040000 0x1000>;
+ interrupts = <71>;
+ interrupt-names = "mc";
+ };
+
+ davinci_emac: ethernet@0x5c000000 {
+ compatible = "ti,am3517-emac";
+ ti,hwmods = "davinci_emac";
+ status = "disabled";
+ reg = <0x5c000000 0x30000>;
+ interrupts = <67 68 69 70>;
+ ti,davinci-ctrl-reg-offset = <0x10000>;
+ ti,davinci-ctrl-mod-reg-offset = <0>;
+ ti,davinci-ctrl-ram-offset = <0x20000>;
+ ti,davinci-ctrl-ram-size = <0x2000>;
+ ti,davinci-rmii-en = /bits/ 8 <1>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+
+ davinci_mdio: ethernet@0x5c030000 {
+ compatible = "ti,davinci_mdio";
+ ti,hwmods = "davinci_mdio";
+ status = "disabled";
+ reg = <0x5c030000 0x1000>;
+ bus_freq = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ uart4: serial@4809e000 {
+ compatible = "ti,omap3-uart";
+ ti,hwmods = "uart4";
+ status = "disabled";
+ reg = <0x4809e000 0x400>;
+ interrupts = <84>;
+ dmas = <&sdma 55 &sdma 54>;
+ dma-names = "tx", "rx";
+ clock-frequency = <48000000>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts
index 90ce29dbe119..08a56bcfc724 100644
--- a/arch/arm/boot/dts/armada-370-db.dts
+++ b/arch/arm/boot/dts/armada-370-db.dts
@@ -99,22 +99,22 @@
spi-max-frequency = <50000000>;
};
};
+ };
- pcie-controller {
+ pcie-controller {
+ status = "okay";
+ /*
+ * The two PCIe units are accessible through
+ * both standard PCIe slots and mini-PCIe
+ * slots on the board.
+ */
+ pcie@1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+ pcie@2,0 {
+ /* Port 1, Lane 0 */
status = "okay";
- /*
- * The two PCIe units are accessible through
- * both standard PCIe slots and mini-PCIe
- * slots on the board.
- */
- pcie@1,0 {
- /* Port 0, Lane 0 */
- status = "okay";
- };
- pcie@2,0 {
- /* Port 1, Lane 0 */
- status = "okay";
- };
};
};
};
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index 00d6a798c705..7f10f627ae5b 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -118,7 +118,7 @@
coherency-fabric@20200 {
compatible = "marvell,coherency-fabric";
- reg = <0x20200 0xb0>, <0x21810 0x1c>;
+ reg = <0x20200 0xb0>, <0x21010 0x1c>;
};
serial@12000 {
diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
index 3f5e6121c730..98335fb34b7a 100644
--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -47,7 +47,7 @@
/*
* MV78230 has 2 PCIe units Gen2.0: One unit can be
* configured as x4 or quad x1 lanes. One unit is
- * x4/x1.
+ * x1 only.
*/
pcie-controller {
compatible = "marvell,armada-xp-pcie";
@@ -62,10 +62,10 @@
ranges =
<0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */
- 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */
0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */
0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */
0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */
+ 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */
0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
@@ -74,8 +74,8 @@
0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */
0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */
- 0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
- 0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */>;
+ 0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
+ 0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */>;
pcie@1,0 {
device_type = "pci";
@@ -145,20 +145,20 @@
status = "disabled";
};
- pcie@9,0 {
+ pcie@5,0 {
device_type = "pci";
- assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
- reg = <0x4800 0 0 0 0>;
+ assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+ reg = <0x2800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
- ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
- 0x81000000 0 0 0x81000000 0x9 0 1 0>;
+ ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
+ 0x81000000 0 0 0x81000000 0x5 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &mpic 99>;
- marvell,pcie-port = <2>;
+ interrupt-map = <0 0 0 0 &mpic 62>;
+ marvell,pcie-port = <1>;
marvell,pcie-lane = <0>;
- clocks = <&gateclk 26>;
+ clocks = <&gateclk 9>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
index 3e9fd1353f89..66609684d41b 100644
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -48,7 +48,7 @@
/*
* MV78260 has 3 PCIe units Gen2.0: Two units can be
* configured as x4 or quad x1 lanes. One unit is
- * x4/x1.
+ * x4 only.
*/
pcie-controller {
compatible = "marvell,armada-xp-pcie";
@@ -68,7 +68,9 @@
0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */
0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */
0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */
- 0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000 /* Port 3.0 registers */
+ 0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000 /* Port 1.1 registers */
+ 0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000 /* Port 1.2 registers */
+ 0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000 /* Port 1.3 registers */
0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
@@ -77,10 +79,18 @@
0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */
0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */
- 0x82000000 0x9 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
- 0x81000000 0x9 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */
- 0x82000000 0xa 0 MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
- 0x81000000 0xa 0 MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO */>;
+
+ 0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
+ 0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */
+ 0x82000000 0x6 0 MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
+ 0x81000000 0x6 0 MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO */
+ 0x82000000 0x7 0 MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
+ 0x81000000 0x7 0 MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO */
+ 0x82000000 0x8 0 MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
+ 0x81000000 0x8 0 MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO */
+
+ 0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
+ 0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */>;
pcie@1,0 {
device_type = "pci";
@@ -106,8 +116,8 @@
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
- ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
- 0x81000000 0 0 0x81000000 0x2 0 1 0>;
+ ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+ 0x81000000 0 0 0x81000000 0x2 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 59>;
marvell,pcie-port = <0>;
@@ -150,37 +160,88 @@
status = "disabled";
};
- pcie@9,0 {
+ pcie@5,0 {
device_type = "pci";
- assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
- reg = <0x4800 0 0 0 0>;
+ assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+ reg = <0x2800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
- ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
- 0x81000000 0 0 0x81000000 0x9 0 1 0>;
+ ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
+ 0x81000000 0 0 0x81000000 0x5 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &mpic 99>;
- marvell,pcie-port = <2>;
+ interrupt-map = <0 0 0 0 &mpic 62>;
+ marvell,pcie-port = <1>;
marvell,pcie-lane = <0>;
- clocks = <&gateclk 26>;
+ clocks = <&gateclk 9>;
status = "disabled";
};
- pcie@10,0 {
+ pcie@6,0 {
device_type = "pci";
- assigned-addresses = <0x82000800 0 0x82000 0 0x2000>;
- reg = <0x5000 0 0 0 0>;
+ assigned-addresses = <0x82000800 0 0x84000 0 0x2000>;
+ reg = <0x3000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
- ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
- 0x81000000 0 0 0x81000000 0xa 0 1 0>;
+ ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
+ 0x81000000 0 0 0x81000000 0x6 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &mpic 103>;
- marvell,pcie-port = <3>;
+ interrupt-map = <0 0 0 0 &mpic 63>;
+ marvell,pcie-port = <1>;
+ marvell,pcie-lane = <1>;
+ clocks = <&gateclk 10>;
+ status = "disabled";
+ };
+
+ pcie@7,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x88000 0 0x2000>;
+ reg = <0x3800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
+ 0x81000000 0 0 0x81000000 0x7 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 64>;
+ marvell,pcie-port = <1>;
+ marvell,pcie-lane = <2>;
+ clocks = <&gateclk 11>;
+ status = "disabled";
+ };
+
+ pcie@8,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>;
+ reg = <0x4000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
+ 0x81000000 0 0 0x81000000 0x8 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 65>;
+ marvell,pcie-port = <1>;
+ marvell,pcie-lane = <3>;
+ clocks = <&gateclk 12>;
+ status = "disabled";
+ };
+
+ pcie@9,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
+ reg = <0x4800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
+ 0x81000000 0 0 0x81000000 0x9 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 99>;
+ marvell,pcie-port = <2>;
marvell,pcie-lane = <0>;
- clocks = <&gateclk 27>;
+ clocks = <&gateclk 26>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
index 2347e9563cef..6801106fa1f8 100644
--- a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
@@ -11,6 +11,10 @@
#include <dt-bindings/interrupt-controller/irq.h>
/ {
+ aliases {
+ serial4 = &usart3;
+ };
+
ahb {
apb {
pinctrl@fffff400 {
diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
index 1e12aeff403b..aa537ed13f0a 100644
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ b/arch/arm/boot/dts/bcm2835.dtsi
@@ -85,6 +85,8 @@
reg = <0x7e205000 0x1000>;
interrupts = <2 21>;
clocks = <&clk_i2c>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
@@ -93,6 +95,8 @@
reg = <0x7e804000 0x1000>;
interrupts = <2 21>;
clocks = <&clk_i2c>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/cros5250-common.dtsi b/arch/arm/boot/dts/cros5250-common.dtsi
index dc259e8b8a73..9b186ac06c8b 100644
--- a/arch/arm/boot/dts/cros5250-common.dtsi
+++ b/arch/arm/boot/dts/cros5250-common.dtsi
@@ -27,6 +27,13 @@
i2c2_bus: i2c2-bus {
samsung,pin-pud = <0>;
};
+
+ max77686_irq: max77686-irq {
+ samsung,pins = "gpx3-2";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
};
i2c@12C60000 {
@@ -35,6 +42,11 @@
max77686@09 {
compatible = "maxim,max77686";
+ interrupt-parent = <&gpx3>;
+ interrupts = <2 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&max77686_irq>;
+ wakeup-source;
reg = <0x09>;
voltage-regulators {
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 59154dc15fe4..fb28b2ecb1db 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -161,7 +161,7 @@
clocks = <&clks 197>, <&clks 3>,
<&clks 197>, <&clks 107>,
<&clks 0>, <&clks 118>,
- <&clks 62>, <&clks 139>,
+ <&clks 0>, <&clks 139>,
<&clks 0>;
clock-names = "core", "rxtx0",
"rxtx1", "rxtx2",
diff --git a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi
index 9c18adf788f7..f577b7df9a29 100644
--- a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi
+++ b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi
@@ -44,8 +44,8 @@
gpmc,wr-access-ns = <186>;
gpmc,cycle2cycle-samecsen;
gpmc,cycle2cycle-diffcsen;
- vmmc-supply = <&vddvario>;
- vmmc_aux-supply = <&vdd33a>;
+ vddvario-supply = <&vddvario>;
+ vdd33a-supply = <&vdd33a>;
reg-io-width = <4>;
smsc,save-mac-address;
};
diff --git a/arch/arm/boot/dts/omap-zoom-common.dtsi b/arch/arm/boot/dts/omap-zoom-common.dtsi
index b0ee342598f0..68221fab978d 100644
--- a/arch/arm/boot/dts/omap-zoom-common.dtsi
+++ b/arch/arm/boot/dts/omap-zoom-common.dtsi
@@ -13,7 +13,7 @@
* they probably share the same GPIO IRQ
* REVISIT: Add timing support from slls644g.pdf
*/
- 8250@3,0 {
+ uart@3,0 {
compatible = "ns16550a";
reg = <3 0 0x100>;
bank-width = <2>;
diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi
index a2bfcde858a6..d0c5b37e248c 100644
--- a/arch/arm/boot/dts/omap2.dtsi
+++ b/arch/arm/boot/dts/omap2.dtsi
@@ -9,6 +9,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pinctrl/omap.h>
#include "skeleton.dtsi"
@@ -21,6 +22,8 @@
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
+ i2c0 = &i2c1;
+ i2c1 = &i2c2;
};
cpus {
@@ -53,6 +56,28 @@
ranges;
ti,hwmods = "l3_main";
+ aes: aes@480a6000 {
+ compatible = "ti,omap2-aes";
+ ti,hwmods = "aes";
+ reg = <0x480a6000 0x50>;
+ dmas = <&sdma 9 &sdma 10>;
+ dma-names = "tx", "rx";
+ };
+
+ hdq1w: 1w@480b2000 {
+ compatible = "ti,omap2420-1w";
+ ti,hwmods = "hdq1w";
+ reg = <0x480b2000 0x1000>;
+ interrupts = <58>;
+ };
+
+ mailbox: mailbox@48094000 {
+ compatible = "ti,omap2-mailbox";
+ ti,hwmods = "mailbox";
+ reg = <0x48094000 0x200>;
+ interrupts = <26>;
+ };
+
intc: interrupt-controller@1 {
compatible = "ti,omap2-intc";
interrupt-controller;
@@ -63,6 +88,7 @@
sdma: dma-controller@48056000 {
compatible = "ti,omap2430-sdma", "ti,omap2420-sdma";
+ ti,hwmods = "dma";
reg = <0x48056000 0x1000>;
interrupts = <12>,
<13>,
@@ -73,21 +99,91 @@
#dma-requests = <64>;
};
+ i2c1: i2c@48070000 {
+ compatible = "ti,omap2-i2c";
+ ti,hwmods = "i2c1";
+ reg = <0x48070000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <56>;
+ dmas = <&sdma 27 &sdma 28>;
+ dma-names = "tx", "rx";
+ };
+
+ i2c2: i2c@48072000 {
+ compatible = "ti,omap2-i2c";
+ ti,hwmods = "i2c2";
+ reg = <0x48072000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <57>;
+ dmas = <&sdma 29 &sdma 30>;
+ dma-names = "tx", "rx";
+ };
+
+ mcspi1: mcspi@48098000 {
+ compatible = "ti,omap2-mcspi";
+ ti,hwmods = "mcspi1";
+ reg = <0x48098000 0x100>;
+ interrupts = <65>;
+ dmas = <&sdma 35 &sdma 36 &sdma 37 &sdma 38
+ &sdma 39 &sdma 40 &sdma 41 &sdma 42>;
+ dma-names = "tx0", "rx0", "tx1", "rx1",
+ "tx2", "rx2", "tx3", "rx3";
+ };
+
+ mcspi2: mcspi@4809a000 {
+ compatible = "ti,omap2-mcspi";
+ ti,hwmods = "mcspi2";
+ reg = <0x4809a000 0x100>;
+ interrupts = <66>;
+ dmas = <&sdma 43 &sdma 44 &sdma 45 &sdma 46>;
+ dma-names = "tx0", "rx0", "tx1", "rx1";
+ };
+
+ rng: rng@480a0000 {
+ compatible = "ti,omap2-rng";
+ ti,hwmods = "rng";
+ reg = <0x480a0000 0x50>;
+ interrupts = <36>;
+ };
+
+ sham: sham@480a4000 {
+ compatible = "ti,omap2-sham";
+ ti,hwmods = "sham";
+ reg = <0x480a4000 0x64>;
+ interrupts = <51>;
+ dmas = <&sdma 13>;
+ dma-names = "rx";
+ };
+
uart1: serial@4806a000 {
compatible = "ti,omap2-uart";
ti,hwmods = "uart1";
+ reg = <0x4806a000 0x2000>;
+ interrupts = <72>;
+ dmas = <&sdma 49 &sdma 50>;
+ dma-names = "tx", "rx";
clock-frequency = <48000000>;
};
uart2: serial@4806c000 {
compatible = "ti,omap2-uart";
ti,hwmods = "uart2";
+ reg = <0x4806c000 0x400>;
+ interrupts = <73>;
+ dmas = <&sdma 51 &sdma 52>;
+ dma-names = "tx", "rx";
clock-frequency = <48000000>;
};
uart3: serial@4806e000 {
compatible = "ti,omap2-uart";
ti,hwmods = "uart3";
+ reg = <0x4806e000 0x400>;
+ interrupts = <74>;
+ dmas = <&sdma 53 &sdma 54>;
+ dma-names = "tx", "rx";
clock-frequency = <48000000>;
};
diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi
index c8f9c55169ea..60c605de22dd 100644
--- a/arch/arm/boot/dts/omap2420.dtsi
+++ b/arch/arm/boot/dts/omap2420.dtsi
@@ -114,6 +114,15 @@
dma-names = "tx", "rx";
};
+ msdi1: mmc@4809c000 {
+ compatible = "ti,omap2420-mmc";
+ ti,hwmods = "msdi1";
+ reg = <0x4809c000 0x80>;
+ interrupts = <83>;
+ dmas = <&sdma 61 &sdma 62>;
+ dma-names = "tx", "rx";
+ };
+
timer1: timer@48028000 {
compatible = "ti,omap2420-timer";
reg = <0x48028000 0x400>;
@@ -121,5 +130,19 @@
ti,hwmods = "timer1";
ti,timer-alwon;
};
+
+ wd_timer2: wdt@48022000 {
+ compatible = "ti,omap2-wdt";
+ ti,hwmods = "wd_timer2";
+ reg = <0x48022000 0x80>;
+ };
};
};
+
+&i2c1 {
+ compatible = "ti,omap2420-i2c";
+};
+
+&i2c2 {
+ compatible = "ti,omap2420-i2c";
+};
diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi
index c535a5a2b27f..d624345666f5 100644
--- a/arch/arm/boot/dts/omap2430.dtsi
+++ b/arch/arm/boot/dts/omap2430.dtsi
@@ -175,6 +175,25 @@
dma-names = "tx", "rx";
};
+ mmc1: mmc@4809c000 {
+ compatible = "ti,omap2-hsmmc";
+ reg = <0x4809c000 0x200>;
+ interrupts = <83>;
+ ti,hwmods = "mmc1";
+ ti,dual-volt;
+ dmas = <&sdma 61>, <&sdma 62>;
+ dma-names = "tx", "rx";
+ };
+
+ mmc2: mmc@480b4000 {
+ compatible = "ti,omap2-hsmmc";
+ reg = <0x480b4000 0x200>;
+ interrupts = <86>;
+ ti,hwmods = "mmc2";
+ dmas = <&sdma 47>, <&sdma 48>;
+ dma-names = "tx", "rx";
+ };
+
timer1: timer@49018000 {
compatible = "ti,omap2420-timer";
reg = <0x49018000 0x400>;
@@ -182,5 +201,35 @@
ti,hwmods = "timer1";
ti,timer-alwon;
};
+
+ mcspi3: mcspi@480b8000 {
+ compatible = "ti,omap2-mcspi";
+ ti,hwmods = "mcspi3";
+ reg = <0x480b8000 0x100>;
+ interrupts = <91>;
+ dmas = <&sdma 15 &sdma 16 &sdma 23 &sdma 24>;
+ dma-names = "tx0", "rx0", "tx1", "rx1";
+ };
+
+ usb_otg_hs: usb_otg_hs@480ac000 {
+ compatible = "ti,omap2-musb";
+ ti,hwmods = "usb_otg_hs";
+ reg = <0x480ac000 0x1000>;
+ interrupts = <93>;
+ };
+
+ wd_timer2: wdt@49016000 {
+ compatible = "ti,omap2-wdt";
+ ti,hwmods = "wd_timer2";
+ reg = <0x49016000 0x80>;
+ };
};
};
+
+&i2c1 {
+ compatible = "ti,omap2430-i2c";
+};
+
+&i2c2 {
+ compatible = "ti,omap2430-i2c";
+};
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index 31a632f7effb..df33a50bc070 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -215,3 +215,10 @@
&usbhsehci {
phys = <0 &hsusb2_phy>;
};
+
+&vaux2 {
+ regulator-name = "usb_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+};
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index fa532aaacc68..3ba4a625ea5b 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -61,6 +61,14 @@
vcc-supply = <&hsusb2_power>;
};
+ sound {
+ compatible = "ti,omap-twl4030";
+ ti,model = "omap3beagle";
+
+ ti,mcbsp = <&mcbsp2>;
+ ti,codec = <&twl_audio>;
+ };
+
gpio_keys {
compatible = "gpio-keys";
@@ -120,6 +128,12 @@
reg = <0x48>;
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
interrupt-parent = <&intc>;
+
+ twl_audio: audio {
+ compatible = "ti,twl4030-audio";
+ codec {
+ };
+ };
};
};
@@ -178,3 +192,10 @@
mode = <3>;
power = <50>;
};
+
+&vaux2 {
+ regulator-name = "vdd_ehci";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+};
diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi
index ba1e58b7b7e3..165aaf7591ba 100644
--- a/arch/arm/boot/dts/omap3-igep.dtsi
+++ b/arch/arm/boot/dts/omap3-igep.dtsi
@@ -1,5 +1,5 @@
/*
- * Device Tree Source for IGEP Technology devices
+ * Common device tree for IGEP boards based on AM/DM37x
*
* Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
* Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
@@ -10,7 +10,7 @@
*/
/dts-v1/;
-#include "omap34xx.dtsi"
+#include "omap36xx.dtsi"
/ {
memory {
@@ -24,6 +24,25 @@
ti,mcbsp = <&mcbsp2>;
ti,codec = <&twl_audio>;
};
+
+ vdd33: regulator-vdd33 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd33";
+ regulator-always-on;
+ };
+
+ lbee1usjyc_vmmc: lbee1usjyc_vmmc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lbee1usjyc_pins>;
+ compatible = "regulator-fixed";
+ regulator-name = "regulator-lbee1usjyc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>; /* gpio_138 WIFI_PDN */
+ startup-delay-us = <10000>;
+ enable-active-high;
+ vin-supply = <&vdd33>;
+ };
};
&omap3_pmx_core {
@@ -48,6 +67,15 @@
>;
};
+ /* WiFi/BT combo */
+ lbee1usjyc_pins: pinmux_lbee1usjyc_pins {
+ pinctrl-single,pins = <
+ 0x136 (PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat5.gpio_137 */
+ 0x138 (PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat6.gpio_138 */
+ 0x13a (PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 */
+ >;
+ };
+
mcbsp2_pins: pinmux_mcbsp2_pins {
pinctrl-single,pins = <
0x10c (PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */
@@ -65,10 +93,17 @@
0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
- 0x120 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat4.sdmmc1_dat4 */
- 0x122 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat5.sdmmc1_dat5 */
- 0x124 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat6.sdmmc1_dat6 */
- 0x126 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat7.sdmmc1_dat7 */
+ >;
+ };
+
+ mmc2_pins: pinmux_mmc2_pins {
+ pinctrl-single,pins = <
+ 0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
+ 0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
+ 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
+ 0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
+ 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
+ 0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
>;
};
@@ -78,10 +113,33 @@
>;
};
+ i2c1_pins: pinmux_i2c1_pins {
+ pinctrl-single,pins = <
+ 0x18a (PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
+ 0x18c (PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */
+ >;
+ };
+
+ i2c2_pins: pinmux_i2c2_pins {
+ pinctrl-single,pins = <
+ 0x18e (PIN_INPUT | MUX_MODE0) /* i2c2_scl.i2c2_scl */
+ 0x190 (PIN_INPUT | MUX_MODE0) /* i2c2_sda.i2c2_sda */
+ >;
+ };
+
+ i2c3_pins: pinmux_i2c3_pins {
+ pinctrl-single,pins = <
+ 0x192 (PIN_INPUT | MUX_MODE0) /* i2c3_scl.i2c3_scl */
+ 0x194 (PIN_INPUT | MUX_MODE0) /* i2c3_sda.i2c3_sda */
+ >;
+ };
+
leds_pins: pinmux_leds_pins { };
};
&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
clock-frequency = <2600000>;
twl: twl@48 {
@@ -101,9 +159,16 @@
#include "twl4030_omap3.dtsi"
&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
clock-frequency = <400000>;
};
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+};
+
&mcbsp2 {
pinctrl-names = "default";
pinctrl-0 = <&mcbsp2_pins>;
@@ -114,11 +179,15 @@
pinctrl-0 = <&mmc1_pins>;
vmmc-supply = <&vmmc1>;
vmmc_aux-supply = <&vsim>;
- bus-width = <8>;
+ bus-width = <4>;
};
&mmc2 {
- status = "disabled";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+ vmmc-supply = <&lbee1usjyc_vmmc>;
+ bus-width = <4>;
+ non-removable;
};
&mmc3 {
diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts
index d5cc79267250..1c7e74d2d2bc 100644
--- a/arch/arm/boot/dts/omap3-igep0020.dts
+++ b/arch/arm/boot/dts/omap3-igep0020.dts
@@ -1,5 +1,5 @@
/*
- * Device Tree Source for IGEPv2 board
+ * Device Tree Source for IGEPv2 Rev. (TI OMAP AM/DM37x)
*
* Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
* Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
@@ -13,7 +13,7 @@
#include "omap-gpmc-smsc911x.dtsi"
/ {
- model = "IGEPv2";
+ model = "IGEPv2 (TI OMAP AM/DM37x)";
compatible = "isee,omap3-igep0020", "ti,omap3";
leds {
@@ -67,6 +67,8 @@
pinctrl-names = "default";
pinctrl-0 = <
&hsusbb1_pins
+ &tfp410_pins
+ &dss_pins
>;
hsusbb1_pins: pinmux_hsusbb1_pins {
@@ -85,6 +87,45 @@
0x5ba (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d7.hsusb1_data3 */
>;
};
+
+ tfp410_pins: tfp410_dvi_pins {
+ pinctrl-single,pins = <
+ 0x196 (PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */
+ >;
+ };
+
+ dss_pins: pinmux_dss_dvi_pins {
+ pinctrl-single,pins = <
+ 0x0a4 (PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
+ 0x0a6 (PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
+ 0x0a8 (PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
+ 0x0aa (PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
+ 0x0ac (PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
+ 0x0ae (PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
+ 0x0b0 (PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
+ 0x0b2 (PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
+ 0x0b4 (PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
+ 0x0b6 (PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
+ 0x0b8 (PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
+ 0x0ba (PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
+ 0x0bc (PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
+ 0x0be (PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
+ 0x0c0 (PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
+ 0x0c2 (PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
+ 0x0c4 (PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
+ 0x0c6 (PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
+ 0x0c8 (PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
+ 0x0ca (PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
+ 0x0cc (PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
+ 0x0ce (PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
+ 0x0d0 (PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
+ 0x0d2 (PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
+ 0x0d4 (PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
+ 0x0d6 (PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
+ 0x0d8 (PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
+ 0x0da (PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
+ >;
+ };
};
&leds_pins {
@@ -174,3 +215,8 @@
&usbhsehci {
phys = <&hsusb1_phy>;
};
+
+&vpll2 {
+ /* Needed for DSS */
+ regulator-name = "vdds_dsi";
+};
diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts
index 525e6d9b0978..02a23f8a3384 100644
--- a/arch/arm/boot/dts/omap3-igep0030.dts
+++ b/arch/arm/boot/dts/omap3-igep0030.dts
@@ -1,5 +1,5 @@
/*
- * Device Tree Source for IGEP COM Module
+ * Device Tree Source for IGEP COM MODULE (TI OMAP AM/DM37x)
*
* Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
* Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
@@ -12,7 +12,7 @@
#include "omap3-igep.dtsi"
/ {
- model = "IGEP COM Module";
+ model = "IGEP COM MODULE (TI OMAP AM/DM37x)";
compatible = "isee,omap3-igep0030", "ti,omap3";
leds {
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index c4f20bfe4cce..6fc85f963530 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -9,7 +9,7 @@
/dts-v1/;
-#include "omap34xx.dtsi"
+#include "omap34xx-hs.dtsi"
/ {
model = "Nokia N900";
@@ -125,6 +125,21 @@
>;
};
+ mmc2_pins: pinmux_mmc2_pins {
+ pinctrl-single,pins = <
+ 0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */
+ 0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */
+ 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */
+ 0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */
+ 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */
+ 0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */
+ 0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat4 */
+ 0x136 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat5 */
+ 0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat6 */
+ 0x13a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat7 */
+ >;
+ };
+
display_pins: pinmux_display_pins {
pinctrl-single,pins = <
0x0d4 (PIN_OUTPUT | MUX_MODE4) /* RX51_LCD_RESET_GPIO */
@@ -358,8 +373,14 @@
cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */
};
+/* most boards use vaux3, only some old versions use vmmc2 instead */
&mmc2 {
- status = "disabled";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+ vmmc-supply = <&vaux3>;
+ vmmc_aux-supply = <&vsim>;
+ bus-width = <8>;
+ non-removable;
};
&mmc3 {
diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi
index 94eb77d3b9dd..5c26c184f2c1 100644
--- a/arch/arm/boot/dts/omap3-n950-n9.dtsi
+++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi
@@ -8,7 +8,7 @@
* published by the Free Software Foundation.
*/
-#include "omap36xx.dtsi"
+#include "omap36xx-hs.dtsi"
/ {
cpus {
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index f3a0c26ed0c2..daabf99d402a 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -82,6 +82,13 @@
ranges;
ti,hwmods = "l3_main";
+ aes: aes@480c5000 {
+ compatible = "ti,omap3-aes";
+ ti,hwmods = "aes";
+ reg = <0x480c5000 0x50>;
+ interrupts = <0>;
+ };
+
counter32k: counter@48320000 {
compatible = "ti,omap-counter32k";
reg = <0x48320000 0x20>;
@@ -260,6 +267,13 @@
ti,hwmods = "i2c3";
};
+ mailbox: mailbox@48094000 {
+ compatible = "ti,omap3-mailbox";
+ ti,hwmods = "mailbox";
+ reg = <0x48094000 0x200>;
+ interrupts = <26>;
+ };
+
mcspi1: spi@48098000 {
compatible = "ti,omap2-mcspi";
reg = <0x48098000 0x100>;
@@ -357,6 +371,13 @@
dma-names = "tx", "rx";
};
+ mmu_isp: mmu@480bd400 {
+ compatible = "ti,omap3-mmu-isp";
+ ti,hwmods = "mmu_isp";
+ reg = <0x480bd400 0x80>;
+ interrupts = <8>;
+ };
+
wdt2: wdt@48314000 {
compatible = "ti,omap3-wdt";
reg = <0x48314000 0x80>;
@@ -442,6 +463,27 @@
dma-names = "tx", "rx";
};
+ sham: sham@480c3000 {
+ compatible = "ti,omap3-sham";
+ ti,hwmods = "sham";
+ reg = <0x480c3000 0x64>;
+ interrupts = <49>;
+ };
+
+ smartreflex_core: smartreflex@480cb000 {
+ compatible = "ti,omap3-smartreflex-core";
+ ti,hwmods = "smartreflex_core";
+ reg = <0x480cb000 0x400>;
+ interrupts = <19>;
+ };
+
+ smartreflex_mpu_iva: smartreflex@480c9000 {
+ compatible = "ti,omap3-smartreflex-iva";
+ ti,hwmods = "smartreflex_mpu_iva";
+ reg = <0x480c9000 0x400>;
+ interrupts = <18>;
+ };
+
timer1: timer@48318000 {
compatible = "ti,omap3430-timer";
reg = <0x48318000 0x400>;
diff --git a/arch/arm/boot/dts/omap34xx-hs.dtsi b/arch/arm/boot/dts/omap34xx-hs.dtsi
new file mode 100644
index 000000000000..1ff626489546
--- /dev/null
+++ b/arch/arm/boot/dts/omap34xx-hs.dtsi
@@ -0,0 +1,16 @@
+/* Disabled modules for secure omaps */
+
+#include "omap34xx.dtsi"
+
+/* Secure omaps have some devices inaccessible depending on the firmware */
+&aes {
+ status = "disabled";
+};
+
+&sham {
+ status = "disabled";
+};
+
+&timer12 {
+ status = "disabled";
+};
diff --git a/arch/arm/boot/dts/omap36xx-hs.dtsi b/arch/arm/boot/dts/omap36xx-hs.dtsi
new file mode 100644
index 000000000000..2c7febb0e016
--- /dev/null
+++ b/arch/arm/boot/dts/omap36xx-hs.dtsi
@@ -0,0 +1,16 @@
+/* Disabled modules for secure omaps */
+
+#include "omap36xx.dtsi"
+
+/* Secure omaps have some devices inaccessible depending on the firmware */
+&aes {
+ status = "disabled";
+};
+
+&sham {
+ status = "disabled";
+};
+
+&timer12 {
+ status = "disabled";
+};
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index 298e85020e1b..88c6a05cab41 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -246,15 +246,6 @@
0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
>;
};
-};
-
-&omap4_pmx_wkup {
- led_wkgpio_pins: pinmux_leds_wkpins {
- pinctrl-single,pins = <
- 0x1a (PIN_OUTPUT | MUX_MODE3) /* gpio_wk7 */
- 0x1c (PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */
- >;
- };
/*
* wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP
@@ -274,7 +265,7 @@
pinctrl-single,pins = <
0x38 (PIN_INPUT | MUX_MODE3) /* gpmc_ncs2.gpio_52 */
0x3a (PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */
- 0x108 (PIN_OUTPUT | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */
+ 0x108 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */
0x10a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */
0x10c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */
0x10e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */
@@ -284,6 +275,15 @@
};
};
+&omap4_pmx_wkup {
+ led_wkgpio_pins: pinmux_leds_wkpins {
+ pinctrl-single,pins = <
+ 0x1a (PIN_OUTPUT | MUX_MODE3) /* gpio_wk7 */
+ 0x1c (PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */
+ >;
+ };
+};
+
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 5fc3f43c5a81..dbc81fb6ef03 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -300,12 +300,12 @@
wl12xx_pins: pinmux_wl12xx_pins {
pinctrl-single,pins = <
0x3a (PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */
- 0x108 (PIN_OUTPUT | MUX_MODE3) /* sdmmc5_clk.sdmmc5_clk */
- 0x10a (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_cmd.sdmmc5_cmd */
- 0x10c (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat0.sdmmc5_dat0 */
- 0x10e (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat1.sdmmc5_dat1 */
- 0x110 (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat2.sdmmc5_dat2 */
- 0x112 (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat3.sdmmc5_dat3 */
+ 0x108 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */
+ 0x10a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */
+ 0x10c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */
+ 0x10e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */
+ 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */
+ 0x112 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */
>;
};
};
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index 6d09b8d42fdd..f936476c2753 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -245,14 +245,14 @@
mpu_periph_clk: mpu_periph_clk {
#clock-cells = <0>;
- compatible = "altr,socfpga-gate-clk";
+ compatible = "altr,socfpga-perip-clk";
clocks = <&mpuclk>;
fixed-divider = <4>;
};
mpu_l2_ram_clk: mpu_l2_ram_clk {
#clock-cells = <0>;
- compatible = "altr,socfpga-gate-clk";
+ compatible = "altr,socfpga-perip-clk";
clocks = <&mpuclk>;
fixed-divider = <2>;
};
@@ -266,8 +266,9 @@
l3_main_clk: l3_main_clk {
#clock-cells = <0>;
- compatible = "altr,socfpga-gate-clk";
+ compatible = "altr,socfpga-perip-clk";
clocks = <&mainclk>;
+ fixed-divider = <1>;
};
l3_mp_clk: l3_mp_clk {
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index c1751a64889a..7f5878c2784a 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -193,7 +193,10 @@
pio: pinctrl@01c20800 {
compatible = "allwinner,sun6i-a31-pinctrl";
reg = <0x01c20800 0x400>;
- interrupts = <0 11 1>, <0 15 1>, <0 16 1>, <0 17 1>;
+ interrupts = <0 11 4>,
+ <0 15 4>,
+ <0 16 4>,
+ <0 17 4>;
clocks = <&apb1_gates 5>;
gpio-controller;
interrupt-controller;
@@ -212,11 +215,11 @@
timer@01c20c00 {
compatible = "allwinner,sun4i-timer";
reg = <0x01c20c00 0xa0>;
- interrupts = <0 18 1>,
- <0 19 1>,
- <0 20 1>,
- <0 21 1>,
- <0 22 1>;
+ interrupts = <0 18 4>,
+ <0 19 4>,
+ <0 20 4>,
+ <0 21 4>,
+ <0 22 4>;
clocks = <&osc24M>;
};
@@ -228,7 +231,7 @@
uart0: serial@01c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
- interrupts = <0 0 1>;
+ interrupts = <0 0 4>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 16>;
@@ -238,7 +241,7 @@
uart1: serial@01c28400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28400 0x400>;
- interrupts = <0 1 1>;
+ interrupts = <0 1 4>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 17>;
@@ -248,7 +251,7 @@
uart2: serial@01c28800 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28800 0x400>;
- interrupts = <0 2 1>;
+ interrupts = <0 2 4>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 18>;
@@ -258,7 +261,7 @@
uart3: serial@01c28c00 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28c00 0x400>;
- interrupts = <0 3 1>;
+ interrupts = <0 3 4>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 19>;
@@ -268,7 +271,7 @@
uart4: serial@01c29000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29000 0x400>;
- interrupts = <0 4 1>;
+ interrupts = <0 4 4>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 20>;
@@ -278,7 +281,7 @@
uart5: serial@01c29400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29400 0x400>;
- interrupts = <0 5 1>;
+ interrupts = <0 5 4>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 21>;
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index e46cfedde74c..367611a0730b 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -170,7 +170,7 @@
emac: ethernet@01c0b000 {
compatible = "allwinner,sun4i-emac";
reg = <0x01c0b000 0x1000>;
- interrupts = <0 55 1>;
+ interrupts = <0 55 4>;
clocks = <&ahb_gates 17>;
status = "disabled";
};
@@ -186,7 +186,7 @@
pio: pinctrl@01c20800 {
compatible = "allwinner,sun7i-a20-pinctrl";
reg = <0x01c20800 0x400>;
- interrupts = <0 28 1>;
+ interrupts = <0 28 4>;
clocks = <&apb0_gates 5>;
gpio-controller;
interrupt-controller;
@@ -251,12 +251,12 @@
timer@01c20c00 {
compatible = "allwinner,sun4i-timer";
reg = <0x01c20c00 0x90>;
- interrupts = <0 22 1>,
- <0 23 1>,
- <0 24 1>,
- <0 25 1>,
- <0 67 1>,
- <0 68 1>;
+ interrupts = <0 22 4>,
+ <0 23 4>,
+ <0 24 4>,
+ <0 25 4>,
+ <0 67 4>,
+ <0 68 4>;
clocks = <&osc24M>;
};
@@ -273,7 +273,7 @@
uart0: serial@01c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
- interrupts = <0 1 1>;
+ interrupts = <0 1 4>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 16>;
@@ -283,7 +283,7 @@
uart1: serial@01c28400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28400 0x400>;
- interrupts = <0 2 1>;
+ interrupts = <0 2 4>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 17>;
@@ -293,7 +293,7 @@
uart2: serial@01c28800 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28800 0x400>;
- interrupts = <0 3 1>;
+ interrupts = <0 3 4>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 18>;
@@ -303,7 +303,7 @@
uart3: serial@01c28c00 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28c00 0x400>;
- interrupts = <0 4 1>;
+ interrupts = <0 4 4>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 19>;
@@ -313,7 +313,7 @@
uart4: serial@01c29000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29000 0x400>;
- interrupts = <0 17 1>;
+ interrupts = <0 17 4>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 20>;
@@ -323,7 +323,7 @@
uart5: serial@01c29400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29400 0x400>;
- interrupts = <0 18 1>;
+ interrupts = <0 18 4>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 21>;
@@ -333,7 +333,7 @@
uart6: serial@01c29800 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29800 0x400>;
- interrupts = <0 19 1>;
+ interrupts = <0 19 4>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 22>;
@@ -343,7 +343,7 @@
uart7: serial@01c29c00 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29c00 0x400>;
- interrupts = <0 20 1>;
+ interrupts = <0 20 4>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 23>;
@@ -353,7 +353,7 @@
i2c0: i2c@01c2ac00 {
compatible = "allwinner,sun4i-i2c";
reg = <0x01c2ac00 0x400>;
- interrupts = <0 7 1>;
+ interrupts = <0 7 4>;
clocks = <&apb1_gates 0>;
clock-frequency = <100000>;
status = "disabled";
@@ -362,7 +362,7 @@
i2c1: i2c@01c2b000 {
compatible = "allwinner,sun4i-i2c";
reg = <0x01c2b000 0x400>;
- interrupts = <0 8 1>;
+ interrupts = <0 8 4>;
clocks = <&apb1_gates 1>;
clock-frequency = <100000>;
status = "disabled";
@@ -371,7 +371,7 @@
i2c2: i2c@01c2b400 {
compatible = "allwinner,sun4i-i2c";
reg = <0x01c2b400 0x400>;
- interrupts = <0 9 1>;
+ interrupts = <0 9 4>;
clocks = <&apb1_gates 2>;
clock-frequency = <100000>;
status = "disabled";
@@ -380,7 +380,7 @@
i2c3: i2c@01c2b800 {
compatible = "allwinner,sun4i-i2c";
reg = <0x01c2b800 0x400>;
- interrupts = <0 88 1>;
+ interrupts = <0 88 4>;
clocks = <&apb1_gates 3>;
clock-frequency = <100000>;
status = "disabled";
@@ -389,7 +389,7 @@
i2c4: i2c@01c2bc00 {
compatible = "allwinner,sun4i-i2c";
reg = <0x01c2bc00 0x400>;
- interrupts = <0 89 1>;
+ interrupts = <0 89 4>;
clocks = <&apb1_gates 15>;
clock-frequency = <100000>;
status = "disabled";
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 4a5903e04827..c1df4e9db140 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -69,6 +69,7 @@ CONFIG_KS8851=y
CONFIG_SMSC911X=y
CONFIG_STMMAC_ETH=y
CONFIG_MDIO_SUN4I=y
+CONFIG_TI_CPSW=y
CONFIG_KEYBOARD_SPEAR=y
CONFIG_SERIO_AMBAKMI=y
CONFIG_SERIAL_8250=y
@@ -133,12 +134,14 @@ CONFIG_USB_GPIO_VBUS=y
CONFIG_USB_ISP1301=y
CONFIG_USB_MXS_PHY=y
CONFIG_MMC=y
+CONFIG_MMC_BLOCK_MINORS=16
CONFIG_MMC_ARMMMCI=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_ESDHC_IMX=y
CONFIG_MMC_SDHCI_TEGRA=y
CONFIG_MMC_SDHCI_SPEAR=y
+CONFIG_MMC_SDHCI_BCM_KONA=y
CONFIG_MMC_OMAP=y
CONFIG_MMC_OMAP_HS=y
CONFIG_EDAC=y
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 98a50c309b90..bfa80a11e8c7 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -173,6 +173,7 @@ CONFIG_MFD_PALMAS=y
CONFIG_MFD_TPS65217=y
CONFIG_MFD_TPS65910=y
CONFIG_TWL6040_CORE=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_PALMAS=y
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig
index d57a85badb5e..3e2259b60236 100644
--- a/arch/arm/configs/sunxi_defconfig
+++ b/arch/arm/configs/sunxi_defconfig
@@ -12,6 +12,9 @@ CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
@@ -58,4 +61,8 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_COMMON_CLK_DEBUG=y
# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_TMPFS=y
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
CONFIG_NLS=y
+CONFIG_PRINTK_TIME=y
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
index ac632cc38f24..c6ebc184bf68 100644
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@@ -22,6 +22,7 @@ CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8"
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
CONFIG_CPU_IDLE=y
+CONFIG_ARM_U8500_CPUIDLE=y
CONFIG_VFP=y
CONFIG_NEON=y
CONFIG_PM_RUNTIME=y
@@ -109,6 +110,8 @@ CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT4_FS=y
CONFIG_VFAT_FS=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_MISC_FILESYSTEMS is not set
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index 9ecccc865046..6976b03e5213 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -100,23 +100,19 @@
#define TASK_UNMAPPED_BASE UL(0x00000000)
#endif
-#ifndef PHYS_OFFSET
-#define PHYS_OFFSET UL(CONFIG_DRAM_BASE)
-#endif
-
#ifndef END_MEM
#define END_MEM (UL(CONFIG_DRAM_BASE) + CONFIG_DRAM_SIZE)
#endif
#ifndef PAGE_OFFSET
-#define PAGE_OFFSET (PHYS_OFFSET)
+#define PAGE_OFFSET PLAT_PHYS_OFFSET
#endif
/*
* The module can be at any place in ram in nommu mode.
*/
#define MODULES_END (END_MEM)
-#define MODULES_VADDR (PHYS_OFFSET)
+#define MODULES_VADDR PAGE_OFFSET
#define XIP_VIRT_ADDR(physaddr) (physaddr)
@@ -157,6 +153,16 @@
#endif
#define ARCH_PGD_MASK ((1 << ARCH_PGD_SHIFT) - 1)
+/*
+ * PLAT_PHYS_OFFSET is the offset (from zero) of the start of physical
+ * memory. This is used for XIP and NoMMU kernels, or by kernels which
+ * have their own mach/memory.h. Assembly code must always use
+ * PLAT_PHYS_OFFSET and not PHYS_OFFSET.
+ */
+#ifndef PLAT_PHYS_OFFSET
+#define PLAT_PHYS_OFFSET UL(CONFIG_PHYS_OFFSET)
+#endif
+
#ifndef __ASSEMBLY__
/*
@@ -239,6 +245,8 @@ static inline unsigned long __phys_to_virt(phys_addr_t x)
#else
+#define PHYS_OFFSET PLAT_PHYS_OFFSET
+
static inline phys_addr_t __virt_to_phys(unsigned long x)
{
return (phys_addr_t)x - PAGE_OFFSET + PHYS_OFFSET;
@@ -251,17 +259,6 @@ static inline unsigned long __phys_to_virt(phys_addr_t x)
#endif
#endif
-#endif /* __ASSEMBLY__ */
-
-#ifndef PHYS_OFFSET
-#ifdef PLAT_PHYS_OFFSET
-#define PHYS_OFFSET PLAT_PHYS_OFFSET
-#else
-#define PHYS_OFFSET UL(CONFIG_PHYS_OFFSET)
-#endif
-#endif
-
-#ifndef __ASSEMBLY__
/*
* PFNs are used to describe any physical page; this means
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index be956dbf6bae..1571d126e9dd 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -61,7 +61,7 @@ extern void __pgd_error(const char *file, int line, pgd_t);
* mapping to be mapped at. This is particularly important for
* non-high vector CPUs.
*/
-#define FIRST_USER_ADDRESS PAGE_SIZE
+#define FIRST_USER_ADDRESS (PAGE_SIZE * 2)
/*
* Use TASK_SIZE as the ceiling argument for free_pgtables() and
diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S
index 14235ba64a90..716249cc2ee1 100644
--- a/arch/arm/kernel/head-nommu.S
+++ b/arch/arm/kernel/head-nommu.S
@@ -68,7 +68,7 @@ ENTRY(stext)
#ifdef CONFIG_ARM_MPU
/* Calculate the size of a region covering just the kernel */
- ldr r5, =PHYS_OFFSET @ Region start: PHYS_OFFSET
+ ldr r5, =PLAT_PHYS_OFFSET @ Region start: PHYS_OFFSET
ldr r6, =(_end) @ Cover whole kernel
sub r6, r6, r5 @ Minimum size of region to map
clz r6, r6 @ Region size must be 2^N...
@@ -213,7 +213,7 @@ ENTRY(__setup_mpu)
set_region_nr r0, #MPU_RAM_REGION
isb
/* Full access from PL0, PL1, shared for CONFIG_SMP, cacheable */
- ldr r0, =PHYS_OFFSET @ RAM starts at PHYS_OFFSET
+ ldr r0, =PLAT_PHYS_OFFSET @ RAM starts at PHYS_OFFSET
ldr r5,=(MPU_AP_PL1RW_PL0RW | MPU_RGN_NORMAL)
setup_region r0, r5, r6, MPU_DATA_SIDE @ PHYS_OFFSET, shared, enabled
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 11d59b32fb8d..32f317e5828a 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -110,7 +110,7 @@ ENTRY(stext)
sub r4, r3, r4 @ (PHYS_OFFSET - PAGE_OFFSET)
add r8, r8, r4 @ PHYS_OFFSET
#else
- ldr r8, =PHYS_OFFSET @ always constant in this case
+ ldr r8, =PLAT_PHYS_OFFSET @ always constant in this case
#endif
/*
diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c
index 57221e349a7c..f0d180d8b29f 100644
--- a/arch/arm/kernel/machine_kexec.c
+++ b/arch/arm/kernel/machine_kexec.c
@@ -14,11 +14,12 @@
#include <asm/pgalloc.h>
#include <asm/mmu_context.h>
#include <asm/cacheflush.h>
+#include <asm/fncpy.h>
#include <asm/mach-types.h>
#include <asm/smp_plat.h>
#include <asm/system_misc.h>
-extern const unsigned char relocate_new_kernel[];
+extern void relocate_new_kernel(void);
extern const unsigned int relocate_new_kernel_size;
extern unsigned long kexec_start_address;
@@ -142,6 +143,8 @@ void machine_kexec(struct kimage *image)
{
unsigned long page_list;
unsigned long reboot_code_buffer_phys;
+ unsigned long reboot_entry = (unsigned long)relocate_new_kernel;
+ unsigned long reboot_entry_phys;
void *reboot_code_buffer;
/*
@@ -168,16 +171,16 @@ void machine_kexec(struct kimage *image)
/* copy our kernel relocation code to the control code page */
- memcpy(reboot_code_buffer,
- relocate_new_kernel, relocate_new_kernel_size);
+ reboot_entry = fncpy(reboot_code_buffer,
+ reboot_entry,
+ relocate_new_kernel_size);
+ reboot_entry_phys = (unsigned long)reboot_entry +
+ (reboot_code_buffer_phys - (unsigned long)reboot_code_buffer);
-
- flush_icache_range((unsigned long) reboot_code_buffer,
- (unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE);
printk(KERN_INFO "Bye!\n");
if (kexec_reinit)
kexec_reinit();
- soft_restart(reboot_code_buffer_phys);
+ soft_restart(reboot_entry_phys);
}
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 94f6b05f9e24..92f7b15dd221 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -404,6 +404,7 @@ EXPORT_SYMBOL(dump_fpu);
unsigned long get_wchan(struct task_struct *p)
{
struct stackframe frame;
+ unsigned long stack_page;
int count = 0;
if (!p || p == current || p->state == TASK_RUNNING)
return 0;
@@ -412,9 +413,11 @@ unsigned long get_wchan(struct task_struct *p)
frame.sp = thread_saved_sp(p);
frame.lr = 0; /* recovered from the stack */
frame.pc = thread_saved_pc(p);
+ stack_page = (unsigned long)task_stack_page(p);
do {
- int ret = unwind_frame(&frame);
- if (ret < 0)
+ if (frame.sp < stack_page ||
+ frame.sp >= stack_page + THREAD_SIZE ||
+ unwind_frame(&frame) < 0)
return 0;
if (!in_sched_functions(frame.pc))
return frame.pc;
diff --git a/arch/arm/kernel/relocate_kernel.S b/arch/arm/kernel/relocate_kernel.S
index d0cdedf4864d..95858966d84e 100644
--- a/arch/arm/kernel/relocate_kernel.S
+++ b/arch/arm/kernel/relocate_kernel.S
@@ -2,10 +2,12 @@
* relocate_kernel.S - put the kernel image in place to boot
*/
+#include <linux/linkage.h>
#include <asm/kexec.h>
- .globl relocate_new_kernel
-relocate_new_kernel:
+ .align 3 /* not needed for this code, but keeps fncpy() happy */
+
+ENTRY(relocate_new_kernel)
ldr r0,kexec_indirection_page
ldr r1,kexec_start_address
@@ -79,6 +81,8 @@ kexec_mach_type:
kexec_boot_atags:
.long 0x0
+ENDPROC(relocate_new_kernel)
+
relocate_new_kernel_end:
.globl relocate_new_kernel_size
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 6a1b8a81b1ae..987a7f5bce5f 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -873,8 +873,6 @@ void __init setup_arch(char **cmdline_p)
machine_desc = mdesc;
machine_name = mdesc->name;
- setup_dma_zone(mdesc);
-
if (mdesc->reboot_mode != REBOOT_HARD)
reboot_mode = mdesc->reboot_mode;
@@ -892,6 +890,7 @@ void __init setup_arch(char **cmdline_p)
sort(&meminfo.bank, meminfo.nr_banks, sizeof(meminfo.bank[0]), meminfo_cmp, NULL);
early_paging_init(mdesc, lookup_processor_type(read_cpuid_id()));
+ setup_dma_zone(mdesc);
sanity_check_meminfo();
arm_memblock_init(&meminfo, mdesc);
diff --git a/arch/arm/kernel/sigreturn_codes.S b/arch/arm/kernel/sigreturn_codes.S
index 3c5d0f2170fd..b84d0cb13682 100644
--- a/arch/arm/kernel/sigreturn_codes.S
+++ b/arch/arm/kernel/sigreturn_codes.S
@@ -30,6 +30,27 @@
* snippets.
*/
+/*
+ * In CPU_THUMBONLY case kernel arm opcodes are not allowed.
+ * Note in this case codes skips those instructions but it uses .org
+ * directive to keep correct layout of sigreturn_codes array.
+ */
+#ifndef CONFIG_CPU_THUMBONLY
+#define ARM_OK(code...) code
+#else
+#define ARM_OK(code...)
+#endif
+
+ .macro arm_slot n
+ .org sigreturn_codes + 12 * (\n)
+ARM_OK( .arm )
+ .endm
+
+ .macro thumb_slot n
+ .org sigreturn_codes + 12 * (\n) + 8
+ .thumb
+ .endm
+
#if __LINUX_ARM_ARCH__ <= 4
/*
* Note we manually set minimally required arch that supports
@@ -45,26 +66,27 @@
.global sigreturn_codes
.type sigreturn_codes, #object
- .arm
+ .align
sigreturn_codes:
/* ARM sigreturn syscall code snippet */
- mov r7, #(__NR_sigreturn - __NR_SYSCALL_BASE)
- swi #(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE)
+ arm_slot 0
+ARM_OK( mov r7, #(__NR_sigreturn - __NR_SYSCALL_BASE) )
+ARM_OK( swi #(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE) )
/* Thumb sigreturn syscall code snippet */
- .thumb
+ thumb_slot 0
movs r7, #(__NR_sigreturn - __NR_SYSCALL_BASE)
swi #0
/* ARM sigreturn_rt syscall code snippet */
- .arm
- mov r7, #(__NR_rt_sigreturn - __NR_SYSCALL_BASE)
- swi #(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE)
+ arm_slot 1
+ARM_OK( mov r7, #(__NR_rt_sigreturn - __NR_SYSCALL_BASE) )
+ARM_OK( swi #(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE) )
/* Thumb sigreturn_rt syscall code snippet */
- .thumb
+ thumb_slot 1
movs r7, #(__NR_rt_sigreturn - __NR_SYSCALL_BASE)
swi #0
@@ -74,7 +96,7 @@ sigreturn_codes:
* it is thumb case or not, so we need additional
* word after real last entry.
*/
- .arm
+ arm_slot 2
.space 4
.size sigreturn_codes, . - sigreturn_codes
diff --git a/arch/arm/kernel/stacktrace.c b/arch/arm/kernel/stacktrace.c
index 00f79e59985b..af4e8c8a5422 100644
--- a/arch/arm/kernel/stacktrace.c
+++ b/arch/arm/kernel/stacktrace.c
@@ -31,7 +31,7 @@ int notrace unwind_frame(struct stackframe *frame)
high = ALIGN(low, THREAD_SIZE);
/* check current frame pointer is within bounds */
- if (fp < (low + 12) || fp + 4 >= high)
+ if (fp < low + 12 || fp > high - 4)
return -EINVAL;
/* restore the registers from the stack frame */
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index dbf0923e8d76..7940241f0576 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -509,9 +509,10 @@ static inline int
__do_cache_op(unsigned long start, unsigned long end)
{
int ret;
- unsigned long chunk = PAGE_SIZE;
do {
+ unsigned long chunk = min(PAGE_SIZE, end - start);
+
if (signal_pending(current)) {
struct thread_info *ti = current_thread_info();
diff --git a/arch/arm/lib/delay-loop.S b/arch/arm/lib/delay-loop.S
index 36b668d8e121..bc1033b897b4 100644
--- a/arch/arm/lib/delay-loop.S
+++ b/arch/arm/lib/delay-loop.S
@@ -40,6 +40,7 @@ ENTRY(__loop_const_udelay) @ 0 <= r0 <= 0x7fffff06
/*
* loops = r0 * HZ * loops_per_jiffy / 1000000
*/
+ .align 3
@ Delay routine
ENTRY(__loop_delay)
diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c
index f607deb40f4d..bc7b363a3083 100644
--- a/arch/arm/mach-at91/at91rm9200_time.c
+++ b/arch/arm/mach-at91/at91rm9200_time.c
@@ -174,7 +174,6 @@ clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev)
static struct clock_event_device clkevt = {
.name = "at91_tick",
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
- .shift = 32,
.rating = 150,
.set_next_event = clkevt32k_next_event,
.set_mode = clkevt32k_mode,
@@ -265,11 +264,9 @@ void __init at91rm9200_timer_init(void)
at91_st_write(AT91_ST_RTMR, 1);
/* Setup timer clockevent, with minimum of two ticks (important!!) */
- clkevt.mult = div_sc(AT91_SLOW_CLOCK, NSEC_PER_SEC, clkevt.shift);
- clkevt.max_delta_ns = clockevent_delta2ns(AT91_ST_ALMV, &clkevt);
- clkevt.min_delta_ns = clockevent_delta2ns(2, &clkevt) + 1;
clkevt.cpumask = cpumask_of(0);
- clockevents_register_device(&clkevt);
+ clockevents_config_and_register(&clkevt, AT91_SLOW_CLOCK,
+ 2, AT91_ST_ALMV);
/* register clocksource */
clocksource_register_hz(&clk32k, AT91_SLOW_CLOCK);
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index 3ed190ce062b..c5101dcb4fb0 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -16,7 +16,11 @@
#include <mach/at91_ramc.h>
#include <mach/at91rm9200_sdramc.h>
+#ifdef CONFIG_PM
extern void at91_pm_set_standby(void (*at91_standby)(void));
+#else
+static inline void at91_pm_set_standby(void (*at91_standby)(void)) { }
+#endif
/*
* The AT91RM9200 goes into self-refresh mode with this command, and will
diff --git a/arch/arm/mach-at91/sama5d3.c b/arch/arm/mach-at91/sama5d3.c
index 3ea86428ee09..a28873fe3049 100644
--- a/arch/arm/mach-at91/sama5d3.c
+++ b/arch/arm/mach-at91/sama5d3.c
@@ -95,19 +95,19 @@ static struct clk twi0_clk = {
.name = "twi0_clk",
.pid = SAMA5D3_ID_TWI0,
.type = CLK_TYPE_PERIPHERAL,
- .div = AT91_PMC_PCR_DIV2,
+ .div = AT91_PMC_PCR_DIV8,
};
static struct clk twi1_clk = {
.name = "twi1_clk",
.pid = SAMA5D3_ID_TWI1,
.type = CLK_TYPE_PERIPHERAL,
- .div = AT91_PMC_PCR_DIV2,
+ .div = AT91_PMC_PCR_DIV8,
};
static struct clk twi2_clk = {
.name = "twi2_clk",
.pid = SAMA5D3_ID_TWI2,
.type = CLK_TYPE_PERIPHERAL,
- .div = AT91_PMC_PCR_DIV2,
+ .div = AT91_PMC_PCR_DIV8,
};
static struct clk mmc0_clk = {
.name = "mci0_clk",
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index c46eccbbd512..78829c513fdc 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -487,7 +487,7 @@ int __init da8xx_register_emac(void)
static struct resource da830_mcasp1_resources[] = {
{
- .name = "mcasp1",
+ .name = "mpu",
.start = DAVINCI_DA830_MCASP1_REG_BASE,
.end = DAVINCI_DA830_MCASP1_REG_BASE + (SZ_1K * 12) - 1,
.flags = IORESOURCE_MEM,
@@ -515,7 +515,7 @@ static struct platform_device da830_mcasp1_device = {
static struct resource da850_mcasp_resources[] = {
{
- .name = "mcasp",
+ .name = "mpu",
.start = DAVINCI_DA8XX_MCASP0_REG_BASE,
.end = DAVINCI_DA8XX_MCASP0_REG_BASE + (SZ_1K * 12) - 1,
.flags = IORESOURCE_MEM,
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index ef9ff1fb6f52..6117fc644188 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -641,6 +641,7 @@ static struct platform_device dm355_edma_device = {
static struct resource dm355_asp1_resources[] = {
{
+ .name = "mpu",
.start = DAVINCI_ASP1_BASE,
.end = DAVINCI_ASP1_BASE + SZ_8K - 1,
.flags = IORESOURCE_MEM,
@@ -906,7 +907,7 @@ static struct davinci_gpio_platform_data dm355_gpio_platform_data = {
int __init dm355_gpio_register(void)
{
return davinci_gpio_register(dm355_gpio_resources,
- sizeof(dm355_gpio_resources),
+ ARRAY_SIZE(dm355_gpio_resources),
&dm355_gpio_platform_data);
}
/*----------------------------------------------------------------------*/
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index 1511a0680f9a..d7c6f85d3fc9 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -720,7 +720,7 @@ static struct davinci_gpio_platform_data dm365_gpio_platform_data = {
int __init dm365_gpio_register(void)
{
return davinci_gpio_register(dm365_gpio_resources,
- sizeof(dm365_gpio_resources),
+ ARRAY_SIZE(dm365_gpio_resources),
&dm365_gpio_platform_data);
}
@@ -942,6 +942,7 @@ static struct platform_device dm365_edma_device = {
static struct resource dm365_asp_resources[] = {
{
+ .name = "mpu",
.start = DAVINCI_DM365_ASP0_BASE,
.end = DAVINCI_DM365_ASP0_BASE + SZ_8K - 1,
.flags = IORESOURCE_MEM,
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index 143a3217e8ef..3ce47997bb46 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -572,6 +572,7 @@ static struct platform_device dm644x_edma_device = {
/* DM6446 EVM uses ASP0; line-out is a pair of RCA jacks */
static struct resource dm644x_asp_resources[] = {
{
+ .name = "mpu",
.start = DAVINCI_ASP0_BASE,
.end = DAVINCI_ASP0_BASE + SZ_8K - 1,
.flags = IORESOURCE_MEM,
@@ -792,7 +793,7 @@ static struct davinci_gpio_platform_data dm644_gpio_platform_data = {
int __init dm644x_gpio_register(void)
{
return davinci_gpio_register(dm644_gpio_resources,
- sizeof(dm644_gpio_resources),
+ ARRAY_SIZE(dm644_gpio_resources),
&dm644_gpio_platform_data);
}
/*----------------------------------------------------------------------*/
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 2a73f299c1d0..0e81fea65e7f 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -621,7 +621,7 @@ static struct platform_device dm646x_edma_device = {
static struct resource dm646x_mcasp0_resources[] = {
{
- .name = "mcasp0",
+ .name = "mpu",
.start = DAVINCI_DM646X_MCASP0_REG_BASE,
.end = DAVINCI_DM646X_MCASP0_REG_BASE + (SZ_1K << 1) - 1,
.flags = IORESOURCE_MEM,
@@ -641,7 +641,7 @@ static struct resource dm646x_mcasp0_resources[] = {
static struct resource dm646x_mcasp1_resources[] = {
{
- .name = "mcasp1",
+ .name = "mpu",
.start = DAVINCI_DM646X_MCASP1_REG_BASE,
.end = DAVINCI_DM646X_MCASP1_REG_BASE + (SZ_1K << 1) - 1,
.flags = IORESOURCE_MEM,
@@ -769,7 +769,7 @@ static struct davinci_gpio_platform_data dm646x_gpio_platform_data = {
int __init dm646x_gpio_register(void)
{
return davinci_gpio_register(dm646x_gpio_resources,
- sizeof(dm646x_gpio_resources),
+ ARRAY_SIZE(dm646x_gpio_resources),
&dm646x_gpio_platform_data);
}
/*----------------------------------------------------------------------*/
diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c
index 2739ca2c1334..e0091685fd48 100644
--- a/arch/arm/mach-footbridge/common.c
+++ b/arch/arm/mach-footbridge/common.c
@@ -15,6 +15,7 @@
#include <linux/init.h>
#include <linux/io.h>
#include <linux/spinlock.h>
+#include <video/vga.h>
#include <asm/pgtable.h>
#include <asm/page.h>
@@ -196,6 +197,8 @@ void __init footbridge_map_io(void)
iotable_init(ebsa285_host_io_desc, ARRAY_SIZE(ebsa285_host_io_desc));
pci_map_io_early(__phys_to_pfn(DC21285_PCI_IO));
}
+
+ vga_base = PCIMEM_BASE;
}
void footbridge_restart(enum reboot_mode mode, const char *cmd)
diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c
index 3490a24f969e..7c2fdae9a38b 100644
--- a/arch/arm/mach-footbridge/dc21285.c
+++ b/arch/arm/mach-footbridge/dc21285.c
@@ -18,7 +18,6 @@
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/spinlock.h>
-#include <video/vga.h>
#include <asm/irq.h>
#include <asm/mach/pci.h>
@@ -291,7 +290,6 @@ void __init dc21285_preinit(void)
int cfn_mode;
pcibios_min_mem = 0x81000000;
- vga_base = PCIMEM_BASE;
mem_size = (unsigned int)high_memory - PAGE_OFFSET;
for (mem_mask = 0x00100000; mem_mask < 0x10000000; mem_mask <<= 1)
diff --git a/arch/arm/mach-footbridge/ebsa285.c b/arch/arm/mach-footbridge/ebsa285.c
index b08243500e2e..1a7235fb52ac 100644
--- a/arch/arm/mach-footbridge/ebsa285.c
+++ b/arch/arm/mach-footbridge/ebsa285.c
@@ -30,21 +30,24 @@ static const struct {
const char *name;
const char *trigger;
} ebsa285_leds[] = {
- { "ebsa285:amber", "heartbeat", },
- { "ebsa285:green", "cpu0", },
+ { "ebsa285:amber", "cpu0", },
+ { "ebsa285:green", "heartbeat", },
{ "ebsa285:red",},
};
+static unsigned char hw_led_state;
+
static void ebsa285_led_set(struct led_classdev *cdev,
enum led_brightness b)
{
struct ebsa285_led *led = container_of(cdev,
struct ebsa285_led, cdev);
- if (b != LED_OFF)
- *XBUS_LEDS |= led->mask;
+ if (b == LED_OFF)
+ hw_led_state |= led->mask;
else
- *XBUS_LEDS &= ~led->mask;
+ hw_led_state &= ~led->mask;
+ *XBUS_LEDS = hw_led_state;
}
static enum led_brightness ebsa285_led_get(struct led_classdev *cdev)
@@ -52,18 +55,19 @@ static enum led_brightness ebsa285_led_get(struct led_classdev *cdev)
struct ebsa285_led *led = container_of(cdev,
struct ebsa285_led, cdev);
- return (*XBUS_LEDS & led->mask) ? LED_FULL : LED_OFF;
+ return hw_led_state & led->mask ? LED_OFF : LED_FULL;
}
static int __init ebsa285_leds_init(void)
{
int i;
- if (machine_is_ebsa285())
+ if (!machine_is_ebsa285())
return -ENODEV;
- /* 3 LEDS All ON */
- *XBUS_LEDS |= XBUS_LED_AMBER | XBUS_LED_GREEN | XBUS_LED_RED;
+ /* 3 LEDS all off */
+ hw_led_state = XBUS_LED_AMBER | XBUS_LED_GREEN | XBUS_LED_RED;
+ *XBUS_LEDS = hw_led_state;
for (i = 0; i < ARRAY_SIZE(ebsa285_leds); i++) {
struct ebsa285_led *led;
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index b3d7e5634b83..bd3bf66ce344 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -17,12 +17,15 @@
#include <linux/clkdev.h>
#include <linux/clocksource.h>
#include <linux/dma-mapping.h>
+#include <linux/input.h>
#include <linux/io.h>
#include <linux/irqchip.h>
+#include <linux/mailbox.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/of_address.h>
+#include <linux/reboot.h>
#include <linux/amba/bus.h>
#include <linux/platform_device.h>
@@ -130,6 +133,24 @@ static struct platform_device highbank_cpuidle_device = {
.name = "cpuidle-calxeda",
};
+static int hb_keys_notifier(struct notifier_block *nb, unsigned long event, void *data)
+{
+ u32 key = *(u32 *)data;
+
+ if (event != 0x1000)
+ return 0;
+
+ if (key == KEY_POWER)
+ orderly_poweroff(false);
+ else if (key == 0xffff)
+ ctrl_alt_del();
+
+ return 0;
+}
+static struct notifier_block hb_keys_nb = {
+ .notifier_call = hb_keys_notifier,
+};
+
static void __init highbank_init(void)
{
struct device_node *np;
@@ -145,6 +166,8 @@ static void __init highbank_init(void)
bus_register_notifier(&platform_bus_type, &highbank_platform_nb);
bus_register_notifier(&amba_bustype, &highbank_amba_nb);
+ pl320_ipc_register_notifier(&hb_keys_nb);
+
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
if (psci_ops.cpu_suspend)
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 1f25f3e99c05..adcef406ff0a 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -19,11 +19,11 @@ secure-common = omap-smc.o omap-secure.o
obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
-obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common)
+obj-$(CONFIG_ARCH_OMAP4) += $(hwmod-common) $(secure-common)
obj-$(CONFIG_SOC_AM33XX) += irq.o $(hwmod-common)
-obj-$(CONFIG_SOC_OMAP5) += prm44xx.o $(hwmod-common) $(secure-common)
+obj-$(CONFIG_SOC_OMAP5) += $(hwmod-common) $(secure-common)
obj-$(CONFIG_SOC_AM43XX) += $(hwmod-common) $(secure-common)
-obj-$(CONFIG_SOC_DRA7XX) += prm44xx.o $(hwmod-common) $(secure-common)
+obj-$(CONFIG_SOC_DRA7XX) += $(hwmod-common) $(secure-common)
ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)
obj-y += mcbsp.o
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 19f1652e94cf..8d972ff18c56 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -131,6 +131,24 @@ DT_MACHINE_START(OMAP3_GP_DT, "Generic OMAP3-GP (Flattened Device Tree)")
.dt_compat = omap3_gp_boards_compat,
.restart = omap3xxx_restart,
MACHINE_END
+
+static const char *am3517_boards_compat[] __initdata = {
+ "ti,am3517",
+ NULL,
+};
+
+DT_MACHINE_START(AM3517_DT, "Generic AM3517 (Flattened Device Tree)")
+ .reserve = omap_reserve,
+ .map_io = omap3_map_io,
+ .init_early = am35xx_init_early,
+ .init_irq = omap_intc_of_init,
+ .handle_irq = omap3_intc_handle_irq,
+ .init_machine = omap_generic_init,
+ .init_late = omap3_init_late,
+ .init_time = omap3_gptimer_timer_init,
+ .dt_compat = am3517_boards_compat,
+ .restart = omap3xxx_restart,
+MACHINE_END
#endif
#ifdef CONFIG_SOC_AM33XX
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index f7644febee81..e30ef6797c63 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -299,7 +299,6 @@ struct omap_sdrc_params;
extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
struct omap_sdrc_params *sdrc_cs1);
struct omap2_hsmmc_info;
-extern int omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers);
extern void omap_reserve(void);
struct omap_hwmod;
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index a4e536b11ec9..58347bb874a0 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -32,7 +32,6 @@
#include "soc.h"
#include "iomap.h"
-#include "mux.h"
#include "control.h"
#include "display.h"
#include "prm.h"
@@ -102,90 +101,13 @@ static const struct omap_dss_hwmod_data omap4_dss_hwmod_data[] __initconst = {
{ "dss_hdmi", "omapdss_hdmi", -1 },
};
-static void __init omap4_tpd12s015_mux_pads(void)
-{
- omap_mux_init_signal("hdmi_cec",
- OMAP_PIN_INPUT_PULLUP);
- omap_mux_init_signal("hdmi_ddc_scl",
- OMAP_PIN_INPUT_PULLUP);
- omap_mux_init_signal("hdmi_ddc_sda",
- OMAP_PIN_INPUT_PULLUP);
-}
-
-static void __init omap4_hdmi_mux_pads(enum omap_hdmi_flags flags)
-{
- u32 reg;
- u16 control_i2c_1;
-
- /*
- * CONTROL_I2C_1: HDMI_DDC_SDA_PULLUPRESX (bit 28) and
- * HDMI_DDC_SCL_PULLUPRESX (bit 24) are set to disable
- * internal pull up resistor.
- */
- if (flags & OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP) {
- control_i2c_1 = OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_I2C_1;
- reg = omap4_ctrl_pad_readl(control_i2c_1);
- reg |= (OMAP4_HDMI_DDC_SDA_PULLUPRESX_MASK |
- OMAP4_HDMI_DDC_SCL_PULLUPRESX_MASK);
- omap4_ctrl_pad_writel(reg, control_i2c_1);
- }
-}
-
-static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes)
-{
- u32 enable_mask, enable_shift;
- u32 pipd_mask, pipd_shift;
- u32 reg;
-
- if (dsi_id == 0) {
- enable_mask = OMAP4_DSI1_LANEENABLE_MASK;
- enable_shift = OMAP4_DSI1_LANEENABLE_SHIFT;
- pipd_mask = OMAP4_DSI1_PIPD_MASK;
- pipd_shift = OMAP4_DSI1_PIPD_SHIFT;
- } else if (dsi_id == 1) {
- enable_mask = OMAP4_DSI2_LANEENABLE_MASK;
- enable_shift = OMAP4_DSI2_LANEENABLE_SHIFT;
- pipd_mask = OMAP4_DSI2_PIPD_MASK;
- pipd_shift = OMAP4_DSI2_PIPD_SHIFT;
- } else {
- return -ENODEV;
- }
-
- reg = omap4_ctrl_pad_readl(OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY);
-
- reg &= ~enable_mask;
- reg &= ~pipd_mask;
-
- reg |= (lanes << enable_shift) & enable_mask;
- reg |= (lanes << pipd_shift) & pipd_mask;
-
- omap4_ctrl_pad_writel(reg, OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY);
-
- return 0;
-}
-
-int __init omap_hdmi_init(enum omap_hdmi_flags flags)
-{
- if (cpu_is_omap44xx()) {
- omap4_hdmi_mux_pads(flags);
- omap4_tpd12s015_mux_pads();
- }
-
- return 0;
-}
-
static int omap_dsi_enable_pads(int dsi_id, unsigned lane_mask)
{
- if (cpu_is_omap44xx())
- return omap4_dsi_mux_pads(dsi_id, lane_mask);
-
return 0;
}
static void omap_dsi_disable_pads(int dsi_id, unsigned lane_mask)
{
- if (cpu_is_omap44xx())
- omap4_dsi_mux_pads(dsi_id, 0);
}
static int omap_dss_set_min_bus_tput(struct device *dev, unsigned long tput)
diff --git a/arch/arm/mach-omap2/dss-common.c b/arch/arm/mach-omap2/dss-common.c
index 365bfd3d9c68..dadccc91488c 100644
--- a/arch/arm/mach-omap2/dss-common.c
+++ b/arch/arm/mach-omap2/dss-common.c
@@ -223,7 +223,7 @@ void __init omap_4430sdp_display_init_of(void)
static struct connector_dvi_platform_data omap3_igep2_dvi_connector_pdata = {
.name = "dvi",
.source = "tfp410.0",
- .i2c_bus_num = 3,
+ .i2c_bus_num = 2,
};
static struct platform_device omap3_igep2_dvi_connector_device = {
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 81de56251955..d24926e6340f 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -1502,6 +1502,22 @@ static int gpmc_probe_generic_child(struct platform_device *pdev,
}
/*
+ * For some GPMC devices we still need to rely on the bootloader
+ * timings because the devices can be connected via FPGA. So far
+ * the list is smc91x on the omap2 SDP boards, and 8250 on zooms.
+ * REVISIT: Add timing support from slls644g.pdf and from the
+ * lan91c96 manual.
+ */
+ if (of_device_is_compatible(child, "ns16550a") ||
+ of_device_is_compatible(child, "smsc,lan91c94") ||
+ of_device_is_compatible(child, "smsc,lan91c111")) {
+ dev_warn(&pdev->dev,
+ "%s using bootloader timings on CS%d\n",
+ child->name, cs);
+ goto no_timings;
+ }
+
+ /*
* FIXME: gpmc_cs_request() will map the CS to an arbitary
* location in the gpmc address space. When booting with
* device-tree we want the NOR flash to be mapped to the
@@ -1529,6 +1545,7 @@ static int gpmc_probe_generic_child(struct platform_device *pdev,
gpmc_read_timings_dt(child, &gpmc_t);
gpmc_cs_set_timings(cs, &gpmc_t);
+no_timings:
if (of_platform_device_create(child, NULL, &pdev->dev))
return 0;
@@ -1541,42 +1558,6 @@ err:
return ret;
}
-/*
- * REVISIT: Add timing support from slls644g.pdf
- */
-static int gpmc_probe_8250(struct platform_device *pdev,
- struct device_node *child)
-{
- struct resource res;
- unsigned long base;
- int ret, cs;
-
- if (of_property_read_u32(child, "reg", &cs) < 0) {
- dev_err(&pdev->dev, "%s has no 'reg' property\n",
- child->full_name);
- return -ENODEV;
- }
-
- if (of_address_to_resource(child, 0, &res) < 0) {
- dev_err(&pdev->dev, "%s has malformed 'reg' property\n",
- child->full_name);
- return -ENODEV;
- }
-
- ret = gpmc_cs_request(cs, resource_size(&res), &base);
- if (ret < 0) {
- dev_err(&pdev->dev, "cannot request GPMC CS %d\n", cs);
- return ret;
- }
-
- if (of_platform_device_create(child, NULL, &pdev->dev))
- return 0;
-
- dev_err(&pdev->dev, "failed to create gpmc child %s\n", child->name);
-
- return -ENODEV;
-}
-
static int gpmc_probe_dt(struct platform_device *pdev)
{
int ret;
@@ -1618,10 +1599,9 @@ static int gpmc_probe_dt(struct platform_device *pdev)
else if (of_node_cmp(child->name, "onenand") == 0)
ret = gpmc_probe_onenand_child(pdev, child);
else if (of_node_cmp(child->name, "ethernet") == 0 ||
- of_node_cmp(child->name, "nor") == 0)
+ of_node_cmp(child->name, "nor") == 0 ||
+ of_node_cmp(child->name, "uart") == 0)
ret = gpmc_probe_generic_child(pdev, child);
- else if (of_node_cmp(child->name, "8250") == 0)
- ret = gpmc_probe_8250(pdev, child);
if (WARN(ret < 0, "%s: probing gpmc child %s failed\n",
__func__, child->full_name))
diff --git a/arch/arm/mach-omap2/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h
index 8cc7d331437d..3e97c6c8ecf1 100644
--- a/arch/arm/mach-omap2/omap-secure.h
+++ b/arch/arm/mach-omap2/omap-secure.h
@@ -76,6 +76,13 @@ static inline void omap_barrier_reserve_memblock(void)
{ }
#endif
+#ifdef CONFIG_SOC_HAS_REALTIME_COUNTER
void set_cntfreq(void);
+#else
+static inline void set_cntfreq(void)
+{
+}
+#endif
+
#endif /* __ASSEMBLER__ */
#endif /* OMAP_ARCH_OMAP_SECURE_H */
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index 57911430324e..b39efd46abf9 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -35,7 +35,6 @@
#include "iomap.h"
#include "common.h"
#include "mmc.h"
-#include "hsmmc.h"
#include "prminst44xx.h"
#include "prcm_mpu44xx.h"
#include "omap4-sar-layout.h"
@@ -284,59 +283,3 @@ skip_errata_init:
omap_wakeupgen_init();
irqchip_init();
}
-
-#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
-static int omap4_twl6030_hsmmc_late_init(struct device *dev)
-{
- int irq = 0;
- struct platform_device *pdev = container_of(dev,
- struct platform_device, dev);
- struct omap_mmc_platform_data *pdata = dev->platform_data;
-
- /* Setting MMC1 Card detect Irq */
- if (pdev->id == 0) {
- irq = twl6030_mmc_card_detect_config();
- if (irq < 0) {
- dev_err(dev, "%s: Error card detect config(%d)\n",
- __func__, irq);
- return irq;
- }
- pdata->slots[0].card_detect_irq = irq;
- pdata->slots[0].card_detect = twl6030_mmc_card_detect;
- }
- return 0;
-}
-
-static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev)
-{
- struct omap_mmc_platform_data *pdata;
-
- /* dev can be null if CONFIG_MMC_OMAP_HS is not set */
- if (!dev) {
- pr_err("Failed %s\n", __func__);
- return;
- }
- pdata = dev->platform_data;
- pdata->init = omap4_twl6030_hsmmc_late_init;
-}
-
-int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
-{
- struct omap2_hsmmc_info *c;
-
- omap_hsmmc_init(controllers);
- for (c = controllers; c->mmc; c++) {
- /* pdev can be null if CONFIG_MMC_OMAP_HS is not set */
- if (!c->pdev)
- continue;
- omap4_twl6030_hsmmc_set_late_init(&c->pdev->dev);
- }
-
- return 0;
-}
-#else
-int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
-{
- return 0;
-}
-#endif
diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c
index 53f0735817bb..e0a398cf28d8 100644
--- a/arch/arm/mach-omap2/omap_device.c
+++ b/arch/arm/mach-omap2/omap_device.c
@@ -183,6 +183,10 @@ static int omap_device_build_from_dt(struct platform_device *pdev)
odbfd_exit1:
kfree(hwmods);
odbfd_exit:
+ /* if data/we are at fault.. load up a fail handler */
+ if (ret)
+ pdev->dev.pm_domain = &omap_device_fail_pm_domain;
+
return ret;
}
@@ -604,6 +608,19 @@ static int _od_runtime_resume(struct device *dev)
return pm_generic_runtime_resume(dev);
}
+
+static int _od_fail_runtime_suspend(struct device *dev)
+{
+ dev_warn(dev, "%s: FIXME: missing hwmod/omap_dev info\n", __func__);
+ return -ENODEV;
+}
+
+static int _od_fail_runtime_resume(struct device *dev)
+{
+ dev_warn(dev, "%s: FIXME: missing hwmod/omap_dev info\n", __func__);
+ return -ENODEV;
+}
+
#endif
#ifdef CONFIG_SUSPEND
@@ -657,6 +674,13 @@ static int _od_resume_noirq(struct device *dev)
#define _od_resume_noirq NULL
#endif
+struct dev_pm_domain omap_device_fail_pm_domain = {
+ .ops = {
+ SET_RUNTIME_PM_OPS(_od_fail_runtime_suspend,
+ _od_fail_runtime_resume, NULL)
+ }
+};
+
struct dev_pm_domain omap_device_pm_domain = {
.ops = {
SET_RUNTIME_PM_OPS(_od_runtime_suspend, _od_runtime_resume,
diff --git a/arch/arm/mach-omap2/omap_device.h b/arch/arm/mach-omap2/omap_device.h
index 17ca1aec2710..78c02b355179 100644
--- a/arch/arm/mach-omap2/omap_device.h
+++ b/arch/arm/mach-omap2/omap_device.h
@@ -29,6 +29,7 @@
#include "omap_hwmod.h"
extern struct dev_pm_domain omap_device_pm_domain;
+extern struct dev_pm_domain omap_device_fail_pm_domain;
/* omap_device._state values */
#define OMAP_DEVICE_STATE_UNKNOWN 0
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index e3f0ecaf87dd..8a1b5e0bad40 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -399,7 +399,7 @@ static int _set_clockactivity(struct omap_hwmod *oh, u8 clockact, u32 *v)
}
/**
- * _set_softreset: set OCP_SYSCONFIG.CLOCKACTIVITY bits in @v
+ * _set_softreset: set OCP_SYSCONFIG.SOFTRESET bit in @v
* @oh: struct omap_hwmod *
* @v: pointer to register contents to modify
*
@@ -427,6 +427,36 @@ static int _set_softreset(struct omap_hwmod *oh, u32 *v)
}
/**
+ * _clear_softreset: clear OCP_SYSCONFIG.SOFTRESET bit in @v
+ * @oh: struct omap_hwmod *
+ * @v: pointer to register contents to modify
+ *
+ * Clear the SOFTRESET bit in @v for hwmod @oh. Returns -EINVAL upon
+ * error or 0 upon success.
+ */
+static int _clear_softreset(struct omap_hwmod *oh, u32 *v)
+{
+ u32 softrst_mask;
+
+ if (!oh->class->sysc ||
+ !(oh->class->sysc->sysc_flags & SYSC_HAS_SOFTRESET))
+ return -EINVAL;
+
+ if (!oh->class->sysc->sysc_fields) {
+ WARN(1,
+ "omap_hwmod: %s: sysc_fields absent for sysconfig class\n",
+ oh->name);
+ return -EINVAL;
+ }
+
+ softrst_mask = (0x1 << oh->class->sysc->sysc_fields->srst_shift);
+
+ *v &= ~softrst_mask;
+
+ return 0;
+}
+
+/**
* _wait_softreset_complete - wait for an OCP softreset to complete
* @oh: struct omap_hwmod * to wait on
*
@@ -785,6 +815,7 @@ static int _init_interface_clks(struct omap_hwmod *oh)
pr_warning("omap_hwmod: %s: cannot clk_get interface_clk %s\n",
oh->name, os->clk);
ret = -EINVAL;
+ continue;
}
os->_clk = c;
/*
@@ -821,6 +852,7 @@ static int _init_opt_clks(struct omap_hwmod *oh)
pr_warning("omap_hwmod: %s: cannot clk_get opt_clk %s\n",
oh->name, oc->clk);
ret = -EINVAL;
+ continue;
}
oc->_clk = c;
/*
@@ -1911,6 +1943,12 @@ static int _ocp_softreset(struct omap_hwmod *oh)
ret = _set_softreset(oh, &v);
if (ret)
goto dis_opt_clks;
+
+ _write_sysconfig(v, oh);
+ ret = _clear_softreset(oh, &v);
+ if (ret)
+ goto dis_opt_clks;
+
_write_sysconfig(v, oh);
if (oh->class->sysc->srst_udelay)
@@ -2326,38 +2364,80 @@ static int _shutdown(struct omap_hwmod *oh)
return 0;
}
+static int of_dev_find_hwmod(struct device_node *np,
+ struct omap_hwmod *oh)
+{
+ int count, i, res;
+ const char *p;
+
+ count = of_property_count_strings(np, "ti,hwmods");
+ if (count < 1)
+ return -ENODEV;
+
+ for (i = 0; i < count; i++) {
+ res = of_property_read_string_index(np, "ti,hwmods",
+ i, &p);
+ if (res)
+ continue;
+ if (!strcmp(p, oh->name)) {
+ pr_debug("omap_hwmod: dt %s[%i] uses hwmod %s\n",
+ np->name, i, oh->name);
+ return i;
+ }
+ }
+
+ return -ENODEV;
+}
+
/**
* of_dev_hwmod_lookup - look up needed hwmod from dt blob
* @np: struct device_node *
* @oh: struct omap_hwmod *
+ * @index: index of the entry found
+ * @found: struct device_node * found or NULL
*
* Parse the dt blob and find out needed hwmod. Recursive function is
* implemented to take care hierarchical dt blob parsing.
- * Return: The device node on success or NULL on failure.
+ * Return: Returns 0 on success, -ENODEV when not found.
*/
-static struct device_node *of_dev_hwmod_lookup(struct device_node *np,
- struct omap_hwmod *oh)
+static int of_dev_hwmod_lookup(struct device_node *np,
+ struct omap_hwmod *oh,
+ int *index,
+ struct device_node **found)
{
- struct device_node *np0 = NULL, *np1 = NULL;
- const char *p;
+ struct device_node *np0 = NULL;
+ int res;
+
+ res = of_dev_find_hwmod(np, oh);
+ if (res >= 0) {
+ *found = np;
+ *index = res;
+ return 0;
+ }
for_each_child_of_node(np, np0) {
- if (of_find_property(np0, "ti,hwmods", NULL)) {
- p = of_get_property(np0, "ti,hwmods", NULL);
- if (!strcmp(p, oh->name))
- return np0;
- np1 = of_dev_hwmod_lookup(np0, oh);
- if (np1)
- return np1;
+ struct device_node *fc;
+ int i;
+
+ res = of_dev_hwmod_lookup(np0, oh, &i, &fc);
+ if (res == 0) {
+ *found = fc;
+ *index = i;
+ return 0;
}
}
- return NULL;
+
+ *found = NULL;
+ *index = 0;
+
+ return -ENODEV;
}
/**
* _init_mpu_rt_base - populate the virtual address for a hwmod
* @oh: struct omap_hwmod * to locate the virtual address
* @data: (unused, caller should pass NULL)
+ * @index: index of the reg entry iospace in device tree
* @np: struct device_node * of the IP block's device node in the DT data
*
* Cache the virtual address used by the MPU to access this IP block's
@@ -2368,7 +2448,7 @@ static struct device_node *of_dev_hwmod_lookup(struct device_node *np,
* -ENXIO on absent or invalid register target address space.
*/
static int __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data,
- struct device_node *np)
+ int index, struct device_node *np)
{
struct omap_hwmod_addr_space *mem;
void __iomem *va_start = NULL;
@@ -2390,13 +2470,17 @@ static int __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data,
if (!np)
return -ENXIO;
- va_start = of_iomap(np, oh->mpu_rt_idx);
+ va_start = of_iomap(np, index + oh->mpu_rt_idx);
} else {
va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start);
}
if (!va_start) {
- pr_err("omap_hwmod: %s: Could not ioremap\n", oh->name);
+ if (mem)
+ pr_err("omap_hwmod: %s: Could not ioremap\n", oh->name);
+ else
+ pr_err("omap_hwmod: %s: Missing dt reg%i for %s\n",
+ oh->name, index, np->full_name);
return -ENXIO;
}
@@ -2422,17 +2506,29 @@ static int __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data,
*/
static int __init _init(struct omap_hwmod *oh, void *data)
{
- int r;
+ int r, index;
struct device_node *np = NULL;
if (oh->_state != _HWMOD_STATE_REGISTERED)
return 0;
- if (of_have_populated_dt())
- np = of_dev_hwmod_lookup(of_find_node_by_name(NULL, "ocp"), oh);
+ if (of_have_populated_dt()) {
+ struct device_node *bus;
+
+ bus = of_find_node_by_name(NULL, "ocp");
+ if (!bus)
+ return -ENODEV;
+
+ r = of_dev_hwmod_lookup(bus, oh, &index, &np);
+ if (r)
+ pr_debug("omap_hwmod: %s missing dt data\n", oh->name);
+ else if (np && index)
+ pr_warn("omap_hwmod: %s using broken dt data from %s\n",
+ oh->name, np->name);
+ }
if (oh->class->sysc) {
- r = _init_mpu_rt_base(oh, NULL, np);
+ r = _init_mpu_rt_base(oh, NULL, index, np);
if (r < 0) {
WARN(1, "omap_hwmod: %s: doesn't have mpu register target base\n",
oh->name);
@@ -3169,6 +3265,11 @@ int omap_hwmod_softreset(struct omap_hwmod *oh)
goto error;
_write_sysconfig(v, oh);
+ ret = _clear_softreset(oh, &v);
+ if (ret)
+ goto error;
+ _write_sysconfig(v, oh);
+
error:
return ret;
}
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 9e56fabd7fa3..d33742908f97 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -1943,7 +1943,8 @@ static struct omap_hwmod_class_sysconfig omap3xxx_usb_host_hs_sysc = {
.syss_offs = 0x0014,
.sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_CLOCKACTIVITY |
SYSC_HAS_SIDLEMODE | SYSC_HAS_ENAWAKEUP |
- SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+ SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
+ SYSS_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
.sysc_fields = &omap_hwmod_sysc_type1,
@@ -2021,15 +2022,7 @@ static struct omap_hwmod omap3xxx_usb_host_hs_hwmod = {
* hence HWMOD_SWSUP_MSTANDBY
*/
- /*
- * During system boot; If the hwmod framework resets the module
- * the module will have smart idle settings; which can lead to deadlock
- * (above Errata Id:i660); so, dont reset the module during boot;
- * Use HWMOD_INIT_NO_RESET.
- */
-
- .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY |
- HWMOD_INIT_NO_RESET,
+ .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
};
/*
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 1e5b12cb8246..3318cae96e7d 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -2937,7 +2937,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_usb_host_hs_sysc = {
.sysc_offs = 0x0010,
.syss_offs = 0x0014,
.sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE |
- SYSC_HAS_SOFTRESET),
+ SYSC_HAS_SOFTRESET | SYSC_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
@@ -3001,15 +3001,7 @@ static struct omap_hwmod omap44xx_usb_host_hs_hwmod = {
* hence HWMOD_SWSUP_MSTANDBY
*/
- /*
- * During system boot; If the hwmod framework resets the module
- * the module will have smart idle settings; which can lead to deadlock
- * (above Errata Id:i660); so, dont reset the module during boot;
- * Use HWMOD_INIT_NO_RESET.
- */
-
- .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY |
- HWMOD_INIT_NO_RESET,
+ .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
};
/*
diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
index 9e08d6994a0b..e297d6231c3a 100644
--- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
@@ -1544,7 +1544,8 @@ static struct omap_hwmod_class_sysconfig omap54xx_usb_host_hs_sysc = {
.rev_offs = 0x0000,
.sysc_offs = 0x0010,
.sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS |
- SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
+ SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+ SYSC_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
@@ -1598,15 +1599,7 @@ static struct omap_hwmod omap54xx_usb_host_hs_hwmod = {
* hence HWMOD_SWSUP_MSTANDBY
*/
- /*
- * During system boot; If the hwmod framework resets the module
- * the module will have smart idle settings; which can lead to deadlock
- * (above Errata Id:i660); so, dont reset the module during boot;
- * Use HWMOD_INIT_NO_RESET.
- */
-
- .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY |
- HWMOD_INIT_NO_RESET,
+ .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
.main_clk = "l3init_60m_fclk",
.prcm = {
.omap4 = {
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index 10c71450cf63..39f020c982e8 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -139,6 +139,7 @@ struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
static struct pdata_init pdata_quirks[] __initdata = {
#ifdef CONFIG_ARCH_OMAP3
+ { "nokia,omap3-n900", hsmmc2_internal_input_clk, },
{ "nokia,omap3-n9", hsmmc2_internal_input_clk, },
{ "nokia,omap3-n950", hsmmc2_internal_input_clk, },
{ "isee,omap3-igep0020", omap3_igep0020_legacy_init, },
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 93b80e5da8d4..1f3770a8a728 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -120,7 +120,7 @@ static void omap3_save_secure_ram_context(void)
* will hang the system.
*/
pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON);
- ret = _omap_save_secure_sram((u32 *)
+ ret = _omap_save_secure_sram((u32 *)(unsigned long)
__pa(omap3_secure_ram_storage));
pwrdm_set_next_pwrst(mpu_pwrdm, mpu_next_state);
/* Following is for error tracking, it should not happen */
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index e233dfcbc186..93a2a6e4260f 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -128,7 +128,8 @@ skip_voltdm:
for (i = 0; i < pwrdm->banks; i++)
pwrdm->ret_mem_off_counter[i] = 0;
- arch_pwrdm->pwrdm_wait_transition(pwrdm);
+ if (arch_pwrdm && arch_pwrdm->pwrdm_wait_transition)
+ arch_pwrdm->pwrdm_wait_transition(pwrdm);
pwrdm->state = pwrdm_read_pwrst(pwrdm);
pwrdm->state_counter[pwrdm->state] = 1;
diff --git a/arch/arm/mach-omap2/prm44xx_54xx.h b/arch/arm/mach-omap2/prm44xx_54xx.h
index 7a976065e138..8d95aa543ef5 100644
--- a/arch/arm/mach-omap2/prm44xx_54xx.h
+++ b/arch/arm/mach-omap2/prm44xx_54xx.h
@@ -43,7 +43,7 @@ extern void omap4_prm_vcvp_write(u32 val, u8 offset);
extern u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
- defined(CONFIG_SOC_DRA7XX)
+ defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM43XX)
void omap44xx_prm_reconfigure_io_chain(void);
#else
static inline void omap44xx_prm_reconfigure_io_chain(void)
diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c
index 0d5dd646f61f..263b15249b5b 100644
--- a/arch/arm/mach-pxa/reset.c
+++ b/arch/arm/mach-pxa/reset.c
@@ -13,6 +13,7 @@
#include <mach/regs-ost.h>
#include <mach/reset.h>
+#include <mach/smemc.h>
unsigned int reset_status;
EXPORT_SYMBOL(reset_status);
@@ -81,6 +82,12 @@ static void do_hw_reset(void)
writel_relaxed(OSSR_M3, OSSR);
/* ... in 100 ms */
writel_relaxed(readl_relaxed(OSCR) + 368640, OSMR3);
+ /*
+ * SDRAM hangs on watchdog reset on Marvell PXA270 (erratum 71)
+ * we put SDRAM into self-refresh to prevent that
+ */
+ while (1)
+ writel_relaxed(MDREFR_SLFRSH, MDREFR);
}
void pxa_restart(enum reboot_mode mode, const char *cmd)
@@ -104,4 +111,3 @@ void pxa_restart(enum reboot_mode mode, const char *cmd)
break;
}
}
-
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 0206b915a6f6..ef5557b807ed 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -425,57 +425,57 @@ static struct platform_device tosa_power_device = {
* Tosa Keyboard
*/
static const uint32_t tosakbd_keymap[] = {
- KEY(0, 2, KEY_W),
- KEY(0, 6, KEY_K),
- KEY(0, 7, KEY_BACKSPACE),
- KEY(0, 8, KEY_P),
- KEY(1, 1, KEY_Q),
- KEY(1, 2, KEY_E),
- KEY(1, 3, KEY_T),
- KEY(1, 4, KEY_Y),
- KEY(1, 6, KEY_O),
- KEY(1, 7, KEY_I),
- KEY(1, 8, KEY_COMMA),
- KEY(2, 1, KEY_A),
- KEY(2, 2, KEY_D),
- KEY(2, 3, KEY_G),
- KEY(2, 4, KEY_U),
- KEY(2, 6, KEY_L),
- KEY(2, 7, KEY_ENTER),
- KEY(2, 8, KEY_DOT),
- KEY(3, 1, KEY_Z),
- KEY(3, 2, KEY_C),
- KEY(3, 3, KEY_V),
- KEY(3, 4, KEY_J),
- KEY(3, 5, TOSA_KEY_ADDRESSBOOK),
- KEY(3, 6, TOSA_KEY_CANCEL),
- KEY(3, 7, TOSA_KEY_CENTER),
- KEY(3, 8, TOSA_KEY_OK),
- KEY(3, 9, KEY_LEFTSHIFT),
- KEY(4, 1, KEY_S),
- KEY(4, 2, KEY_R),
- KEY(4, 3, KEY_B),
- KEY(4, 4, KEY_N),
- KEY(4, 5, TOSA_KEY_CALENDAR),
- KEY(4, 6, TOSA_KEY_HOMEPAGE),
- KEY(4, 7, KEY_LEFTCTRL),
- KEY(4, 8, TOSA_KEY_LIGHT),
- KEY(4, 10, KEY_RIGHTSHIFT),
- KEY(5, 1, KEY_TAB),
- KEY(5, 2, KEY_SLASH),
- KEY(5, 3, KEY_H),
- KEY(5, 4, KEY_M),
- KEY(5, 5, TOSA_KEY_MENU),
- KEY(5, 7, KEY_UP),
- KEY(5, 11, TOSA_KEY_FN),
- KEY(6, 1, KEY_X),
- KEY(6, 2, KEY_F),
- KEY(6, 3, KEY_SPACE),
- KEY(6, 4, KEY_APOSTROPHE),
- KEY(6, 5, TOSA_KEY_MAIL),
- KEY(6, 6, KEY_LEFT),
- KEY(6, 7, KEY_DOWN),
- KEY(6, 8, KEY_RIGHT),
+ KEY(0, 1, KEY_W),
+ KEY(0, 5, KEY_K),
+ KEY(0, 6, KEY_BACKSPACE),
+ KEY(0, 7, KEY_P),
+ KEY(1, 0, KEY_Q),
+ KEY(1, 1, KEY_E),
+ KEY(1, 2, KEY_T),
+ KEY(1, 3, KEY_Y),
+ KEY(1, 5, KEY_O),
+ KEY(1, 6, KEY_I),
+ KEY(1, 7, KEY_COMMA),
+ KEY(2, 0, KEY_A),
+ KEY(2, 1, KEY_D),
+ KEY(2, 2, KEY_G),
+ KEY(2, 3, KEY_U),
+ KEY(2, 5, KEY_L),
+ KEY(2, 6, KEY_ENTER),
+ KEY(2, 7, KEY_DOT),
+ KEY(3, 0, KEY_Z),
+ KEY(3, 1, KEY_C),
+ KEY(3, 2, KEY_V),
+ KEY(3, 3, KEY_J),
+ KEY(3, 4, TOSA_KEY_ADDRESSBOOK),
+ KEY(3, 5, TOSA_KEY_CANCEL),
+ KEY(3, 6, TOSA_KEY_CENTER),
+ KEY(3, 7, TOSA_KEY_OK),
+ KEY(3, 8, KEY_LEFTSHIFT),
+ KEY(4, 0, KEY_S),
+ KEY(4, 1, KEY_R),
+ KEY(4, 2, KEY_B),
+ KEY(4, 3, KEY_N),
+ KEY(4, 4, TOSA_KEY_CALENDAR),
+ KEY(4, 5, TOSA_KEY_HOMEPAGE),
+ KEY(4, 6, KEY_LEFTCTRL),
+ KEY(4, 7, TOSA_KEY_LIGHT),
+ KEY(4, 9, KEY_RIGHTSHIFT),
+ KEY(5, 0, KEY_TAB),
+ KEY(5, 1, KEY_SLASH),
+ KEY(5, 2, KEY_H),
+ KEY(5, 3, KEY_M),
+ KEY(5, 4, TOSA_KEY_MENU),
+ KEY(5, 6, KEY_UP),
+ KEY(5, 10, TOSA_KEY_FN),
+ KEY(6, 0, KEY_X),
+ KEY(6, 1, KEY_F),
+ KEY(6, 2, KEY_SPACE),
+ KEY(6, 3, KEY_APOSTROPHE),
+ KEY(6, 4, TOSA_KEY_MAIL),
+ KEY(6, 5, KEY_LEFT),
+ KEY(6, 6, KEY_DOWN),
+ KEY(6, 7, KEY_RIGHT),
};
static struct matrix_keymap_data tosakbd_keymap_data = {
diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig
index 037100a1563a..aee77f06f887 100644
--- a/arch/arm/mach-socfpga/Kconfig
+++ b/arch/arm/mach-socfpga/Kconfig
@@ -10,6 +10,7 @@ config ARCH_SOCFPGA
select GENERIC_CLOCKEVENTS
select GPIO_PL061 if GPIOLIB
select HAVE_ARM_SCU
+ select HAVE_ARM_TWD if SMP
select HAVE_SMP
select MFD_SYSCON
select SPARSE_IRQ
diff --git a/arch/arm/mach-tegra/fuse.c b/arch/arm/mach-tegra/fuse.c
index d4639c506622..3a9c1f1c219d 100644
--- a/arch/arm/mach-tegra/fuse.c
+++ b/arch/arm/mach-tegra/fuse.c
@@ -198,10 +198,12 @@ void __init tegra_init_fuse(void)
switch (tegra_chip_id) {
case TEGRA20:
tegra20_fuse_init_randomness();
+ break;
case TEGRA30:
case TEGRA114:
default:
tegra30_fuse_init_randomness();
+ break;
}
pr_info("Tegra Revision: %s SKU: %d CPU Process: %d Core Process: %d\n",
@@ -209,13 +211,3 @@ void __init tegra_init_fuse(void)
tegra_sku_id, tegra_cpu_process_id,
tegra_core_process_id);
}
-
-unsigned long long tegra_chip_uid(void)
-{
- unsigned long long lo, hi;
-
- lo = tegra_fuse_readl(FUSE_UID_LOW);
- hi = tegra_fuse_readl(FUSE_UID_HIGH);
- return (hi << 32ull) | lo;
-}
-EXPORT_SYMBOL(tegra_chip_uid);
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 2e85c1e72535..12c7e5c03ea4 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -140,6 +140,10 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
/* Requires call-back bindings. */
OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata),
/* Requires DMA bindings. */
+ OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", &mop500_sdi0_data),
+ OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1", &mop500_sdi1_data),
+ OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2", &mop500_sdi2_data),
+ OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4", &mop500_sdi4_data),
OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000,
"ux500-msp-i2s.0", &msp0_platform_data),
OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000,
diff --git a/arch/arm/mach-vexpress/spc.c b/arch/arm/mach-vexpress/spc.c
index 033d34dcbd3f..c26ef5b92ca7 100644
--- a/arch/arm/mach-vexpress/spc.c
+++ b/arch/arm/mach-vexpress/spc.c
@@ -53,6 +53,11 @@
#define A15_BX_ADDR0 0x68
#define A7_BX_ADDR0 0x78
+/* SPC CPU/cluster reset statue */
+#define STANDBYWFI_STAT 0x3c
+#define STANDBYWFI_STAT_A15_CPU_MASK(cpu) (1 << (cpu))
+#define STANDBYWFI_STAT_A7_CPU_MASK(cpu) (1 << (3 + (cpu)))
+
/* SPC system config interface registers */
#define SYSCFG_WDATA 0x70
#define SYSCFG_RDATA 0x74
@@ -213,6 +218,41 @@ void ve_spc_powerdown(u32 cluster, bool enable)
writel_relaxed(enable, info->baseaddr + pwdrn_reg);
}
+static u32 standbywfi_cpu_mask(u32 cpu, u32 cluster)
+{
+ return cluster_is_a15(cluster) ?
+ STANDBYWFI_STAT_A15_CPU_MASK(cpu)
+ : STANDBYWFI_STAT_A7_CPU_MASK(cpu);
+}
+
+/**
+ * ve_spc_cpu_in_wfi(u32 cpu, u32 cluster)
+ *
+ * @cpu: mpidr[7:0] bitfield describing CPU affinity level within cluster
+ * @cluster: mpidr[15:8] bitfield describing cluster affinity level
+ *
+ * @return: non-zero if and only if the specified CPU is in WFI
+ *
+ * Take care when interpreting the result of this function: a CPU might
+ * be in WFI temporarily due to idle, and is not necessarily safely
+ * parked.
+ */
+int ve_spc_cpu_in_wfi(u32 cpu, u32 cluster)
+{
+ int ret;
+ u32 mask = standbywfi_cpu_mask(cpu, cluster);
+
+ if (cluster >= MAX_CLUSTERS)
+ return 1;
+
+ ret = readl_relaxed(info->baseaddr + STANDBYWFI_STAT);
+
+ pr_debug("%s: PCFGREG[0x%X] = 0x%08X, mask = 0x%X\n",
+ __func__, STANDBYWFI_STAT, ret, mask);
+
+ return ret & mask;
+}
+
static int ve_spc_get_performance(int cluster, u32 *freq)
{
struct ve_spc_opp *opps = info->opps[cluster];
diff --git a/arch/arm/mach-vexpress/spc.h b/arch/arm/mach-vexpress/spc.h
index dbd44c3720f9..793d065243b9 100644
--- a/arch/arm/mach-vexpress/spc.h
+++ b/arch/arm/mach-vexpress/spc.h
@@ -20,5 +20,6 @@ void ve_spc_global_wakeup_irq(bool set);
void ve_spc_cpu_wakeup_irq(u32 cluster, u32 cpu, bool set);
void ve_spc_set_resume_addr(u32 cluster, u32 cpu, u32 addr);
void ve_spc_powerdown(u32 cluster, bool enable);
+int ve_spc_cpu_in_wfi(u32 cpu, u32 cluster);
#endif
diff --git a/arch/arm/mach-vexpress/tc2_pm.c b/arch/arm/mach-vexpress/tc2_pm.c
index 05a364c5077a..29e7785a54bc 100644
--- a/arch/arm/mach-vexpress/tc2_pm.c
+++ b/arch/arm/mach-vexpress/tc2_pm.c
@@ -12,6 +12,7 @@
* published by the Free Software Foundation.
*/
+#include <linux/delay.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/kernel.h>
@@ -32,11 +33,17 @@
#include "spc.h"
/* SCC conf registers */
+#define RESET_CTRL 0x018
+#define RESET_A15_NCORERESET(cpu) (1 << (2 + (cpu)))
+#define RESET_A7_NCORERESET(cpu) (1 << (16 + (cpu)))
+
#define A15_CONF 0x400
#define A7_CONF 0x500
#define SYS_INFO 0x700
#define SPC_BASE 0xb00
+static void __iomem *scc;
+
/*
* We can't use regular spinlocks. In the switcher case, it is possible
* for an outbound CPU to call power_down() after its inbound counterpart
@@ -190,6 +197,55 @@ static void tc2_pm_power_down(void)
tc2_pm_down(0);
}
+static int tc2_core_in_reset(unsigned int cpu, unsigned int cluster)
+{
+ u32 mask = cluster ?
+ RESET_A7_NCORERESET(cpu)
+ : RESET_A15_NCORERESET(cpu);
+
+ return !(readl_relaxed(scc + RESET_CTRL) & mask);
+}
+
+#define POLL_MSEC 10
+#define TIMEOUT_MSEC 1000
+
+static int tc2_pm_power_down_finish(unsigned int cpu, unsigned int cluster)
+{
+ unsigned tries;
+
+ pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+ BUG_ON(cluster >= TC2_CLUSTERS || cpu >= TC2_MAX_CPUS_PER_CLUSTER);
+
+ for (tries = 0; tries < TIMEOUT_MSEC / POLL_MSEC; ++tries) {
+ /*
+ * Only examine the hardware state if the target CPU has
+ * caught up at least as far as tc2_pm_down():
+ */
+ if (ACCESS_ONCE(tc2_pm_use_count[cpu][cluster]) == 0) {
+ pr_debug("%s(cpu=%u, cluster=%u): RESET_CTRL = 0x%08X\n",
+ __func__, cpu, cluster,
+ readl_relaxed(scc + RESET_CTRL));
+
+ /*
+ * We need the CPU to reach WFI, but the power
+ * controller may put the cluster in reset and
+ * power it off as soon as that happens, before
+ * we have a chance to see STANDBYWFI.
+ *
+ * So we need to check for both conditions:
+ */
+ if (tc2_core_in_reset(cpu, cluster) ||
+ ve_spc_cpu_in_wfi(cpu, cluster))
+ return 0; /* success: the CPU is halted */
+ }
+
+ /* Otherwise, wait and retry: */
+ msleep(POLL_MSEC);
+ }
+
+ return -ETIMEDOUT; /* timeout */
+}
+
static void tc2_pm_suspend(u64 residency)
{
unsigned int mpidr, cpu, cluster;
@@ -232,10 +288,11 @@ static void tc2_pm_powered_up(void)
}
static const struct mcpm_platform_ops tc2_pm_power_ops = {
- .power_up = tc2_pm_power_up,
- .power_down = tc2_pm_power_down,
- .suspend = tc2_pm_suspend,
- .powered_up = tc2_pm_powered_up,
+ .power_up = tc2_pm_power_up,
+ .power_down = tc2_pm_power_down,
+ .power_down_finish = tc2_pm_power_down_finish,
+ .suspend = tc2_pm_suspend,
+ .powered_up = tc2_pm_powered_up,
};
static bool __init tc2_pm_usage_count_init(void)
@@ -269,7 +326,6 @@ static void __naked tc2_pm_power_up_setup(unsigned int affinity_level)
static int __init tc2_pm_init(void)
{
int ret, irq;
- void __iomem *scc;
u32 a15_cluster_id, a7_cluster_id, sys_info;
struct device_node *np;
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 79f8b39801a8..f61a5707823a 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -9,6 +9,7 @@
*
* DMA uncached mapping support.
*/
+#include <linux/bootmem.h>
#include <linux/module.h>
#include <linux/mm.h>
#include <linux/gfp.h>
@@ -157,6 +158,44 @@ struct dma_map_ops arm_coherent_dma_ops = {
};
EXPORT_SYMBOL(arm_coherent_dma_ops);
+static int __dma_supported(struct device *dev, u64 mask, bool warn)
+{
+ unsigned long max_dma_pfn;
+
+ /*
+ * If the mask allows for more memory than we can address,
+ * and we actually have that much memory, then we must
+ * indicate that DMA to this device is not supported.
+ */
+ if (sizeof(mask) != sizeof(dma_addr_t) &&
+ mask > (dma_addr_t)~0 &&
+ dma_to_pfn(dev, ~0) < max_pfn) {
+ if (warn) {
+ dev_warn(dev, "Coherent DMA mask %#llx is larger than dma_addr_t allows\n",
+ mask);
+ dev_warn(dev, "Driver did not use or check the return value from dma_set_coherent_mask()?\n");
+ }
+ return 0;
+ }
+
+ max_dma_pfn = min(max_pfn, arm_dma_pfn_limit);
+
+ /*
+ * Translate the device's DMA mask to a PFN limit. This
+ * PFN number includes the page which we can DMA to.
+ */
+ if (dma_to_pfn(dev, mask) < max_dma_pfn) {
+ if (warn)
+ dev_warn(dev, "Coherent DMA mask %#llx (pfn %#lx-%#lx) covers a smaller range of system memory than the DMA zone pfn 0x0-%#lx\n",
+ mask,
+ dma_to_pfn(dev, 0), dma_to_pfn(dev, mask) + 1,
+ max_dma_pfn + 1);
+ return 0;
+ }
+
+ return 1;
+}
+
static u64 get_coherent_dma_mask(struct device *dev)
{
u64 mask = (u64)DMA_BIT_MASK(32);
@@ -173,32 +212,8 @@ static u64 get_coherent_dma_mask(struct device *dev)
return 0;
}
- /*
- * If the mask allows for more memory than we can address,
- * and we actually have that much memory, then fail the
- * allocation.
- */
- if (sizeof(mask) != sizeof(dma_addr_t) &&
- mask > (dma_addr_t)~0 &&
- dma_to_pfn(dev, ~0) > arm_dma_pfn_limit) {
- dev_warn(dev, "Coherent DMA mask %#llx is larger than dma_addr_t allows\n",
- mask);
- dev_warn(dev, "Driver did not use or check the return value from dma_set_coherent_mask()?\n");
- return 0;
- }
-
- /*
- * Now check that the mask, when translated to a PFN,
- * fits within the allowable addresses which we can
- * allocate.
- */
- if (dma_to_pfn(dev, mask) < arm_dma_pfn_limit) {
- dev_warn(dev, "Coherent DMA mask %#llx (pfn %#lx-%#lx) covers a smaller range of system memory than the DMA zone pfn 0x0-%#lx\n",
- mask,
- dma_to_pfn(dev, 0), dma_to_pfn(dev, mask) + 1,
- arm_dma_pfn_limit + 1);
+ if (!__dma_supported(dev, mask, true))
return 0;
- }
}
return mask;
@@ -1027,28 +1042,7 @@ void arm_dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
*/
int dma_supported(struct device *dev, u64 mask)
{
- unsigned long limit;
-
- /*
- * If the mask allows for more memory than we can address,
- * and we actually have that much memory, then we must
- * indicate that DMA to this device is not supported.
- */
- if (sizeof(mask) != sizeof(dma_addr_t) &&
- mask > (dma_addr_t)~0 &&
- dma_to_pfn(dev, ~0) > arm_dma_pfn_limit)
- return 0;
-
- /*
- * Translate the device's DMA mask to a PFN limit. This
- * PFN number includes the page which we can DMA to.
- */
- limit = dma_to_pfn(dev, mask);
-
- if (limit < arm_dma_pfn_limit)
- return 0;
-
- return 1;
+ return __dma_supported(dev, mask, false);
}
EXPORT_SYMBOL(dma_supported);
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 3e8f106ee5fe..1f7b19a47060 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -229,7 +229,7 @@ void __init setup_dma_zone(const struct machine_desc *mdesc)
#ifdef CONFIG_ZONE_DMA
if (mdesc->dma_zone_size) {
arm_dma_zone_size = mdesc->dma_zone_size;
- arm_dma_limit = PHYS_OFFSET + arm_dma_zone_size - 1;
+ arm_dma_limit = __pv_phys_offset + arm_dma_zone_size - 1;
} else
arm_dma_limit = 0xffffffff;
arm_dma_pfn_limit = arm_dma_limit >> PAGE_SHIFT;
diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c
index d27158c38eb0..5e85ed371364 100644
--- a/arch/arm/mm/mmap.c
+++ b/arch/arm/mm/mmap.c
@@ -146,7 +146,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,
info.flags = VM_UNMAPPED_AREA_TOPDOWN;
info.length = len;
- info.low_limit = PAGE_SIZE;
+ info.low_limit = FIRST_USER_ADDRESS;
info.high_limit = mm->mmap_base;
info.align_mask = do_align ? (PAGE_MASK & (SHMLBA - 1)) : 0;
info.align_offset = pgoff << PAGE_SHIFT;
diff --git a/arch/arm/mm/pgd.c b/arch/arm/mm/pgd.c
index 0acb089d0f70..1046b373d1ae 100644
--- a/arch/arm/mm/pgd.c
+++ b/arch/arm/mm/pgd.c
@@ -87,7 +87,8 @@ pgd_t *pgd_alloc(struct mm_struct *mm)
init_pud = pud_offset(init_pgd, 0);
init_pmd = pmd_offset(init_pud, 0);
init_pte = pte_offset_map(init_pmd, 0);
- set_pte_ext(new_pte, *init_pte, 0);
+ set_pte_ext(new_pte + 0, init_pte[0], 0);
+ set_pte_ext(new_pte + 1, init_pte[1], 0);
pte_unmap(init_pte);
pte_unmap(new_pte);
}
diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h
index fb92abb91628..2861b155485a 100644
--- a/arch/arm/plat-omap/include/plat/dmtimer.h
+++ b/arch/arm/plat-omap/include/plat/dmtimer.h
@@ -336,8 +336,11 @@ static inline void __omap_dm_timer_enable_posted(struct omap_dm_timer *timer)
if (timer->posted)
return;
- if (timer->errata & OMAP_TIMER_ERRATA_I103_I767)
+ if (timer->errata & OMAP_TIMER_ERRATA_I103_I767) {
+ timer->posted = OMAP_TIMER_NONPOSTED;
+ __omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG, 0, 0);
return;
+ }
__omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG,
OMAP_TIMER_CTRL_POSTED, 0);
diff --git a/arch/arm/xen/p2m.c b/arch/arm/xen/p2m.c
index 23732cdff551..b31ee1b275b0 100644
--- a/arch/arm/xen/p2m.c
+++ b/arch/arm/xen/p2m.c
@@ -25,8 +25,9 @@ struct xen_p2m_entry {
struct rb_node rbnode_phys;
};
-rwlock_t p2m_lock;
+static rwlock_t p2m_lock;
struct rb_root phys_to_mach = RB_ROOT;
+EXPORT_SYMBOL_GPL(phys_to_mach);
static struct rb_root mach_to_phys = RB_ROOT;
static int xen_add_phys_to_mach_entry(struct xen_p2m_entry *new)
@@ -200,7 +201,7 @@ bool __set_phys_to_machine(unsigned long pfn, unsigned long mfn)
}
EXPORT_SYMBOL_GPL(__set_phys_to_machine);
-int p2m_init(void)
+static int p2m_init(void)
{
rwlock_init(&p2m_lock);
return 0;
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 88c8b6c1341a..6d4dd22ee4b7 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -159,8 +159,7 @@ config NR_CPUS
range 2 32
depends on SMP
# These have to remain sorted largest to smallest
- default "8" if ARCH_XGENE
- default "4"
+ default "8"
config HOTPLUG_CPU
bool "Support for hot-pluggable CPUs"
diff --git a/arch/arm64/boot/dts/foundation-v8.dts b/arch/arm64/boot/dts/foundation-v8.dts
index 84fcc5018284..519c4b2c0687 100644
--- a/arch/arm64/boot/dts/foundation-v8.dts
+++ b/arch/arm64/boot/dts/foundation-v8.dts
@@ -6,6 +6,8 @@
/dts-v1/;
+/memreserve/ 0x80000000 0x00010000;
+
/ {
model = "Foundation-v8A";
compatible = "arm,foundation-aarch64", "arm,vexpress";
diff --git a/arch/arm64/include/asm/io.h b/arch/arm64/include/asm/io.h
index 4cc813eddacb..572769727227 100644
--- a/arch/arm64/include/asm/io.h
+++ b/arch/arm64/include/asm/io.h
@@ -229,7 +229,7 @@ extern void __iomem *__ioremap(phys_addr_t phys_addr, size_t size, pgprot_t prot
extern void __iounmap(volatile void __iomem *addr);
extern void __iomem *ioremap_cache(phys_addr_t phys_addr, size_t size);
-#define PROT_DEFAULT (PTE_TYPE_PAGE | PTE_AF | PTE_DIRTY)
+#define PROT_DEFAULT (pgprot_default | PTE_DIRTY)
#define PROT_DEVICE_nGnRE (PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_ATTRINDX(MT_DEVICE_nGnRE))
#define PROT_NORMAL_NC (PROT_DEFAULT | PTE_ATTRINDX(MT_NORMAL_NC))
#define PROT_NORMAL (PROT_DEFAULT | PTE_ATTRINDX(MT_NORMAL))
diff --git a/arch/arm64/include/asm/irqflags.h b/arch/arm64/include/asm/irqflags.h
index aa11943b8502..b2fcfbc51ecc 100644
--- a/arch/arm64/include/asm/irqflags.h
+++ b/arch/arm64/include/asm/irqflags.h
@@ -56,6 +56,9 @@ static inline void arch_local_irq_disable(void)
#define local_fiq_enable() asm("msr daifclr, #1" : : : "memory")
#define local_fiq_disable() asm("msr daifset, #1" : : : "memory")
+#define local_async_enable() asm("msr daifclr, #4" : : : "memory")
+#define local_async_disable() asm("msr daifset, #4" : : : "memory")
+
/*
* Save the current interrupt enable state.
*/
diff --git a/arch/arm64/include/asm/pgtable-hwdef.h b/arch/arm64/include/asm/pgtable-hwdef.h
index 755f86143320..b1d2e26c3c88 100644
--- a/arch/arm64/include/asm/pgtable-hwdef.h
+++ b/arch/arm64/include/asm/pgtable-hwdef.h
@@ -43,7 +43,7 @@
* Section
*/
#define PMD_SECT_VALID (_AT(pmdval_t, 1) << 0)
-#define PMD_SECT_PROT_NONE (_AT(pmdval_t, 1) << 2)
+#define PMD_SECT_PROT_NONE (_AT(pmdval_t, 1) << 58)
#define PMD_SECT_USER (_AT(pmdval_t, 1) << 6) /* AP[1] */
#define PMD_SECT_RDONLY (_AT(pmdval_t, 1) << 7) /* AP[2] */
#define PMD_SECT_S (_AT(pmdval_t, 3) << 8)
diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h
index 17bd3af0a117..7f2b60affbb4 100644
--- a/arch/arm64/include/asm/pgtable.h
+++ b/arch/arm64/include/asm/pgtable.h
@@ -25,10 +25,11 @@
* Software defined PTE bits definition.
*/
#define PTE_VALID (_AT(pteval_t, 1) << 0)
-#define PTE_PROT_NONE (_AT(pteval_t, 1) << 2) /* only when !PTE_VALID */
-#define PTE_FILE (_AT(pteval_t, 1) << 3) /* only when !pte_present() */
+#define PTE_FILE (_AT(pteval_t, 1) << 2) /* only when !pte_present() */
#define PTE_DIRTY (_AT(pteval_t, 1) << 55)
#define PTE_SPECIAL (_AT(pteval_t, 1) << 56)
+ /* bit 57 for PMD_SECT_SPLITTING */
+#define PTE_PROT_NONE (_AT(pteval_t, 1) << 58) /* only when !PTE_VALID */
/*
* VMALLOC and SPARSEMEM_VMEMMAP ranges.
@@ -254,7 +255,7 @@ static inline int has_transparent_hugepage(void)
#define pgprot_noncached(prot) \
__pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_DEVICE_nGnRnE))
#define pgprot_writecombine(prot) \
- __pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_DEVICE_GRE))
+ __pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_NORMAL_NC))
#define pgprot_dmacoherent(prot) \
__pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_NORMAL_NC))
#define __HAVE_PHYS_MEM_ACCESS_PROT
@@ -357,18 +358,20 @@ extern pgd_t idmap_pg_dir[PTRS_PER_PGD];
/*
* Encode and decode a swap entry:
- * bits 0, 2: present (must both be zero)
- * bit 3: PTE_FILE
- * bits 4-8: swap type
- * bits 9-63: swap offset
+ * bits 0-1: present (must be zero)
+ * bit 2: PTE_FILE
+ * bits 3-8: swap type
+ * bits 9-57: swap offset
*/
-#define __SWP_TYPE_SHIFT 4
+#define __SWP_TYPE_SHIFT 3
#define __SWP_TYPE_BITS 6
+#define __SWP_OFFSET_BITS 49
#define __SWP_TYPE_MASK ((1 << __SWP_TYPE_BITS) - 1)
#define __SWP_OFFSET_SHIFT (__SWP_TYPE_BITS + __SWP_TYPE_SHIFT)
+#define __SWP_OFFSET_MASK ((1UL << __SWP_OFFSET_BITS) - 1)
#define __swp_type(x) (((x).val >> __SWP_TYPE_SHIFT) & __SWP_TYPE_MASK)
-#define __swp_offset(x) ((x).val >> __SWP_OFFSET_SHIFT)
+#define __swp_offset(x) (((x).val >> __SWP_OFFSET_SHIFT) & __SWP_OFFSET_MASK)
#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << __SWP_TYPE_SHIFT) | ((offset) << __SWP_OFFSET_SHIFT) })
#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
@@ -382,15 +385,15 @@ extern pgd_t idmap_pg_dir[PTRS_PER_PGD];
/*
* Encode and decode a file entry:
- * bits 0, 2: present (must both be zero)
- * bit 3: PTE_FILE
- * bits 4-63: file offset / PAGE_SIZE
+ * bits 0-1: present (must be zero)
+ * bit 2: PTE_FILE
+ * bits 3-57: file offset / PAGE_SIZE
*/
#define pte_file(pte) (pte_val(pte) & PTE_FILE)
-#define pte_to_pgoff(x) (pte_val(x) >> 4)
-#define pgoff_to_pte(x) __pte(((x) << 4) | PTE_FILE)
+#define pte_to_pgoff(x) (pte_val(x) >> 3)
+#define pgoff_to_pte(x) __pte(((x) << 3) | PTE_FILE)
-#define PTE_FILE_MAX_BITS 60
+#define PTE_FILE_MAX_BITS 55
extern int kern_addr_valid(unsigned long addr);
diff --git a/arch/arm64/kernel/debug-monitors.c b/arch/arm64/kernel/debug-monitors.c
index 6a0a9b132d7a..4ae68579031d 100644
--- a/arch/arm64/kernel/debug-monitors.c
+++ b/arch/arm64/kernel/debug-monitors.c
@@ -248,7 +248,8 @@ static int brk_handler(unsigned long addr, unsigned int esr,
int aarch32_break_handler(struct pt_regs *regs)
{
siginfo_t info;
- unsigned int instr;
+ u32 arm_instr;
+ u16 thumb_instr;
bool bp = false;
void __user *pc = (void __user *)instruction_pointer(regs);
@@ -257,18 +258,21 @@ int aarch32_break_handler(struct pt_regs *regs)
if (compat_thumb_mode(regs)) {
/* get 16-bit Thumb instruction */
- get_user(instr, (u16 __user *)pc);
- if (instr == AARCH32_BREAK_THUMB2_LO) {
+ get_user(thumb_instr, (u16 __user *)pc);
+ thumb_instr = le16_to_cpu(thumb_instr);
+ if (thumb_instr == AARCH32_BREAK_THUMB2_LO) {
/* get second half of 32-bit Thumb-2 instruction */
- get_user(instr, (u16 __user *)(pc + 2));
- bp = instr == AARCH32_BREAK_THUMB2_HI;
+ get_user(thumb_instr, (u16 __user *)(pc + 2));
+ thumb_instr = le16_to_cpu(thumb_instr);
+ bp = thumb_instr == AARCH32_BREAK_THUMB2_HI;
} else {
- bp = instr == AARCH32_BREAK_THUMB;
+ bp = thumb_instr == AARCH32_BREAK_THUMB;
}
} else {
/* 32-bit ARM instruction */
- get_user(instr, (u32 __user *)pc);
- bp = (instr & ~0xf0000000) == AARCH32_BREAK_ARM;
+ get_user(arm_instr, (u32 __user *)pc);
+ arm_instr = le32_to_cpu(arm_instr);
+ bp = (arm_instr & ~0xf0000000) == AARCH32_BREAK_ARM;
}
if (!bp)
diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index e1166145ca29..4d2c6f3f0c41 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -309,15 +309,12 @@ el1_irq:
#ifdef CONFIG_TRACE_IRQFLAGS
bl trace_hardirqs_off
#endif
-#ifdef CONFIG_PREEMPT
- get_thread_info tsk
- ldr w24, [tsk, #TI_PREEMPT] // get preempt count
- add w0, w24, #1 // increment it
- str w0, [tsk, #TI_PREEMPT]
-#endif
+
irq_handler
+
#ifdef CONFIG_PREEMPT
- str w24, [tsk, #TI_PREEMPT] // restore preempt count
+ get_thread_info tsk
+ ldr w24, [tsk, #TI_PREEMPT] // restore preempt count
cbnz w24, 1f // preempt count != 0
ldr x0, [tsk, #TI_FLAGS] // get flags
tbz x0, #TIF_NEED_RESCHED, 1f // needs rescheduling?
@@ -507,22 +504,10 @@ el0_irq_naked:
#ifdef CONFIG_TRACE_IRQFLAGS
bl trace_hardirqs_off
#endif
- get_thread_info tsk
-#ifdef CONFIG_PREEMPT
- ldr w24, [tsk, #TI_PREEMPT] // get preempt count
- add w23, w24, #1 // increment it
- str w23, [tsk, #TI_PREEMPT]
-#endif
+
irq_handler
-#ifdef CONFIG_PREEMPT
- ldr w0, [tsk, #TI_PREEMPT]
- str w24, [tsk, #TI_PREEMPT]
- cmp w0, w23
- b.eq 1f
- mov x1, #0
- str x1, [x1] // BUG
-1:
-#endif
+ get_thread_info tsk
+
#ifdef CONFIG_TRACE_IRQFLAGS
bl trace_hardirqs_on
#endif
diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
index 7009387348b7..c68cca5c3523 100644
--- a/arch/arm64/kernel/head.S
+++ b/arch/arm64/kernel/head.S
@@ -282,8 +282,9 @@ ENDPROC(secondary_holding_pen)
* be used where CPUs are brought online dynamically by the kernel.
*/
ENTRY(secondary_entry)
- bl __calc_phys_offset // x2=phys offset
bl el2_setup // Drop to EL1
+ bl __calc_phys_offset // x24=PHYS_OFFSET, x28=PHYS_OFFSET-PAGE_OFFSET
+ bl set_cpu_boot_mode_flag
b secondary_startup
ENDPROC(secondary_entry)
diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c
index fecdbf7de82e..6777a2192b83 100644
--- a/arch/arm64/kernel/ptrace.c
+++ b/arch/arm64/kernel/ptrace.c
@@ -636,28 +636,27 @@ static int compat_gpr_get(struct task_struct *target,
for (i = 0; i < num_regs; ++i) {
unsigned int idx = start + i;
- void *reg;
+ compat_ulong_t reg;
switch (idx) {
case 15:
- reg = (void *)&task_pt_regs(target)->pc;
+ reg = task_pt_regs(target)->pc;
break;
case 16:
- reg = (void *)&task_pt_regs(target)->pstate;
+ reg = task_pt_regs(target)->pstate;
break;
case 17:
- reg = (void *)&task_pt_regs(target)->orig_x0;
+ reg = task_pt_regs(target)->orig_x0;
break;
default:
- reg = (void *)&task_pt_regs(target)->regs[idx];
+ reg = task_pt_regs(target)->regs[idx];
}
- ret = copy_to_user(ubuf, reg, sizeof(compat_ulong_t));
-
+ ret = copy_to_user(ubuf, &reg, sizeof(reg));
if (ret)
break;
- else
- ubuf += sizeof(compat_ulong_t);
+
+ ubuf += sizeof(reg);
}
return ret;
@@ -685,28 +684,28 @@ static int compat_gpr_set(struct task_struct *target,
for (i = 0; i < num_regs; ++i) {
unsigned int idx = start + i;
- void *reg;
+ compat_ulong_t reg;
+
+ ret = copy_from_user(&reg, ubuf, sizeof(reg));
+ if (ret)
+ return ret;
+
+ ubuf += sizeof(reg);
switch (idx) {
case 15:
- reg = (void *)&newregs.pc;
+ newregs.pc = reg;
break;
case 16:
- reg = (void *)&newregs.pstate;
+ newregs.pstate = reg;
break;
case 17:
- reg = (void *)&newregs.orig_x0;
+ newregs.orig_x0 = reg;
break;
default:
- reg = (void *)&newregs.regs[idx];
+ newregs.regs[idx] = reg;
}
- ret = copy_from_user(reg, ubuf, sizeof(compat_ulong_t));
-
- if (ret)
- goto out;
- else
- ubuf += sizeof(compat_ulong_t);
}
if (valid_user_regs(&newregs.user_regs))
@@ -714,7 +713,6 @@ static int compat_gpr_set(struct task_struct *target,
else
ret = -EINVAL;
-out:
return ret;
}
diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c
index 0bc5e4cbc017..bd9bbd0e44ed 100644
--- a/arch/arm64/kernel/setup.c
+++ b/arch/arm64/kernel/setup.c
@@ -205,6 +205,11 @@ u64 __cpu_logical_map[NR_CPUS] = { [0 ... NR_CPUS-1] = INVALID_HWID };
void __init setup_arch(char **cmdline_p)
{
+ /*
+ * Unmask asynchronous aborts early to catch possible system errors.
+ */
+ local_async_enable();
+
setup_processor();
setup_machine_fdt(__fdt_pointer);
diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c
index a5aeefab03c3..a0c2ca602cf8 100644
--- a/arch/arm64/kernel/smp.c
+++ b/arch/arm64/kernel/smp.c
@@ -160,6 +160,7 @@ asmlinkage void secondary_start_kernel(void)
local_irq_enable();
local_fiq_enable();
+ local_async_enable();
/*
* OK, it's off to the idle thread for us
diff --git a/arch/arm64/mm/proc.S b/arch/arm64/mm/proc.S
index 421b99fd635d..0f7fec52c7f8 100644
--- a/arch/arm64/mm/proc.S
+++ b/arch/arm64/mm/proc.S
@@ -111,12 +111,12 @@ ENTRY(__cpu_setup)
bl __flush_dcache_all
mov lr, x28
ic iallu // I+BTB cache invalidate
+ tlbi vmalle1is // invalidate I + D TLBs
dsb sy
mov x0, #3 << 20
msr cpacr_el1, x0 // Enable FP/ASIMD
msr mdscr_el1, xzr // Reset mdscr_el1
- tlbi vmalle1is // invalidate I + D TLBs
/*
* Memory region attributes for LPAE:
*
diff --git a/arch/avr32/boards/favr-32/setup.c b/arch/avr32/boards/favr-32/setup.c
index 7b1f2cd85400..1f121497b517 100644
--- a/arch/avr32/boards/favr-32/setup.c
+++ b/arch/avr32/boards/favr-32/setup.c
@@ -298,8 +298,10 @@ static int __init set_abdac_rate(struct platform_device *pdev)
*/
retval = clk_round_rate(pll1,
CONFIG_BOARD_FAVR32_ABDAC_RATE * 256 * 16);
- if (retval < 0)
+ if (retval <= 0) {
+ retval = -EINVAL;
goto out_abdac;
+ }
retval = clk_set_rate(pll1, retval);
if (retval != 0)
diff --git a/arch/avr32/configs/atngw100_defconfig b/arch/avr32/configs/atngw100_defconfig
index d5aff36ade92..4733e38e7ae6 100644
--- a/arch/avr32/configs/atngw100_defconfig
+++ b/arch/avr32/configs/atngw100_defconfig
@@ -59,7 +59,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
diff --git a/arch/avr32/configs/atngw100_evklcd100_defconfig b/arch/avr32/configs/atngw100_evklcd100_defconfig
index 4abcf435d599..1be0ee31bd91 100644
--- a/arch/avr32/configs/atngw100_evklcd100_defconfig
+++ b/arch/avr32/configs/atngw100_evklcd100_defconfig
@@ -61,7 +61,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
diff --git a/arch/avr32/configs/atngw100_evklcd101_defconfig b/arch/avr32/configs/atngw100_evklcd101_defconfig
index 18f3fa0470ff..796e536f7bc4 100644
--- a/arch/avr32/configs/atngw100_evklcd101_defconfig
+++ b/arch/avr32/configs/atngw100_evklcd101_defconfig
@@ -60,7 +60,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
diff --git a/arch/avr32/configs/atngw100_mrmt_defconfig b/arch/avr32/configs/atngw100_mrmt_defconfig
index 06e389cfcd12..9a57da44eb6f 100644
--- a/arch/avr32/configs/atngw100_mrmt_defconfig
+++ b/arch/avr32/configs/atngw100_mrmt_defconfig
@@ -48,7 +48,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
diff --git a/arch/avr32/configs/atngw100mkii_defconfig b/arch/avr32/configs/atngw100mkii_defconfig
index 2518a1368d7c..97fe1b399b06 100644
--- a/arch/avr32/configs/atngw100mkii_defconfig
+++ b/arch/avr32/configs/atngw100mkii_defconfig
@@ -59,7 +59,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
diff --git a/arch/avr32/configs/atngw100mkii_evklcd100_defconfig b/arch/avr32/configs/atngw100mkii_evklcd100_defconfig
index 245ef6bd0fa6..a176d24467e9 100644
--- a/arch/avr32/configs/atngw100mkii_evklcd100_defconfig
+++ b/arch/avr32/configs/atngw100mkii_evklcd100_defconfig
@@ -62,7 +62,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
diff --git a/arch/avr32/configs/atngw100mkii_evklcd101_defconfig b/arch/avr32/configs/atngw100mkii_evklcd101_defconfig
index fa6cbac6e418..d1bf6dcfc47d 100644
--- a/arch/avr32/configs/atngw100mkii_evklcd101_defconfig
+++ b/arch/avr32/configs/atngw100mkii_evklcd101_defconfig
@@ -61,7 +61,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
diff --git a/arch/avr32/configs/atstk1002_defconfig b/arch/avr32/configs/atstk1002_defconfig
index bbd5131021a5..2813dd2b9138 100644
--- a/arch/avr32/configs/atstk1002_defconfig
+++ b/arch/avr32/configs/atstk1002_defconfig
@@ -53,7 +53,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
diff --git a/arch/avr32/configs/atstk1003_defconfig b/arch/avr32/configs/atstk1003_defconfig
index c1cd726f9012..f8ff3a3baad4 100644
--- a/arch/avr32/configs/atstk1003_defconfig
+++ b/arch/avr32/configs/atstk1003_defconfig
@@ -42,7 +42,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
diff --git a/arch/avr32/configs/atstk1004_defconfig b/arch/avr32/configs/atstk1004_defconfig
index 754ae56b2767..992228e54e38 100644
--- a/arch/avr32/configs/atstk1004_defconfig
+++ b/arch/avr32/configs/atstk1004_defconfig
@@ -42,7 +42,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
diff --git a/arch/avr32/configs/atstk1006_defconfig b/arch/avr32/configs/atstk1006_defconfig
index 58589d8cc0ac..b8e698b0d1fa 100644
--- a/arch/avr32/configs/atstk1006_defconfig
+++ b/arch/avr32/configs/atstk1006_defconfig
@@ -54,7 +54,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
diff --git a/arch/avr32/configs/favr-32_defconfig b/arch/avr32/configs/favr-32_defconfig
index c90fbf6d35bc..07bed3f7eb5e 100644
--- a/arch/avr32/configs/favr-32_defconfig
+++ b/arch/avr32/configs/favr-32_defconfig
@@ -58,7 +58,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
diff --git a/arch/avr32/configs/hammerhead_defconfig b/arch/avr32/configs/hammerhead_defconfig
index ba7c31e269cb..18db853386c8 100644
--- a/arch/avr32/configs/hammerhead_defconfig
+++ b/arch/avr32/configs/hammerhead_defconfig
@@ -58,7 +58,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
diff --git a/arch/avr32/configs/merisc_defconfig b/arch/avr32/configs/merisc_defconfig
index 65de4431108c..91df6b2986be 100644
--- a/arch/avr32/configs/merisc_defconfig
+++ b/arch/avr32/configs/merisc_defconfig
@@ -46,7 +46,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
diff --git a/arch/avr32/configs/mimc200_defconfig b/arch/avr32/configs/mimc200_defconfig
index 0a8bfdc420e0..d630e089dd32 100644
--- a/arch/avr32/configs/mimc200_defconfig
+++ b/arch/avr32/configs/mimc200_defconfig
@@ -49,7 +49,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
diff --git a/arch/avr32/kernel/time.c b/arch/avr32/kernel/time.c
index 12f828ad5058..d0f771be9e96 100644
--- a/arch/avr32/kernel/time.c
+++ b/arch/avr32/kernel/time.c
@@ -59,7 +59,7 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
static struct irqaction timer_irqaction = {
.handler = timer_interrupt,
/* Oprofile uses the same irq as the timer, so allow it to be shared */
- .flags = IRQF_TIMER | IRQF_DISABLED | IRQF_SHARED,
+ .flags = IRQF_TIMER | IRQF_SHARED,
.name = "avr32_comparator",
};
diff --git a/arch/avr32/mach-at32ap/pm.c b/arch/avr32/mach-at32ap/pm.c
index 32d680eb6f48..db190842b80c 100644
--- a/arch/avr32/mach-at32ap/pm.c
+++ b/arch/avr32/mach-at32ap/pm.c
@@ -181,7 +181,7 @@ static const struct platform_suspend_ops avr32_pm_ops = {
.enter = avr32_pm_enter,
};
-static unsigned long avr32_pm_offset(void *symbol)
+static unsigned long __init avr32_pm_offset(void *symbol)
{
extern u8 pm_exception[];
diff --git a/arch/parisc/configs/c3000_defconfig b/arch/parisc/configs/c3000_defconfig
index ec1b014952b6..acacd348df89 100644
--- a/arch/parisc/configs/c3000_defconfig
+++ b/arch/parisc/configs/c3000_defconfig
@@ -50,7 +50,7 @@ CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_IDE=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_NS87415=y
-CONFIG_BLK_DEV_SIIMAGE=m
+CONFIG_PATA_SIL680=m
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
diff --git a/arch/parisc/configs/c8000_defconfig b/arch/parisc/configs/c8000_defconfig
index e1c8d2015c89..8249ac9d9cfc 100644
--- a/arch/parisc/configs/c8000_defconfig
+++ b/arch/parisc/configs/c8000_defconfig
@@ -20,7 +20,6 @@ CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_PA8X00=y
-CONFIG_MLONGCALLS=y
CONFIG_64BIT=y
CONFIG_SMP=y
CONFIG_PREEMPT=y
@@ -81,8 +80,6 @@ CONFIG_IDE=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_PLATFORM=y
CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_SIIMAGE=y
-CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_BLK_DEV_SR=m
@@ -94,6 +91,8 @@ CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_ISCSI_TCP=m
CONFIG_ISCSI_BOOT_SYSFS=m
+CONFIG_ATA=y
+CONFIG_PATA_SIL680=y
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
CONFIG_FUSION_SAS=y
@@ -114,9 +113,8 @@ CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_KEYBOARD_HIL_OLD is not set
# CONFIG_KEYBOARD_HIL is not set
-CONFIG_MOUSE_PS2=m
+# CONFIG_MOUSE_PS2 is not set
CONFIG_INPUT_MISC=y
-CONFIG_INPUT_CM109=m
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_GSCPS2=m
@@ -167,34 +165,6 @@ CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_AD1889=m
# CONFIG_SND_USB is not set
# CONFIG_SND_GSC is not set
-CONFIG_HID_A4TECH=m
-CONFIG_HID_APPLE=m
-CONFIG_HID_BELKIN=m
-CONFIG_HID_CHERRY=m
-CONFIG_HID_CHICONY=m
-CONFIG_HID_CYPRESS=m
-CONFIG_HID_DRAGONRISE=m
-CONFIG_HID_EZKEY=m
-CONFIG_HID_KYE=m
-CONFIG_HID_GYRATION=m
-CONFIG_HID_TWINHAN=m
-CONFIG_HID_KENSINGTON=m
-CONFIG_HID_LOGITECH=m
-CONFIG_HID_LOGITECH_DJ=m
-CONFIG_HID_MICROSOFT=m
-CONFIG_HID_MONTEREY=m
-CONFIG_HID_NTRIG=m
-CONFIG_HID_ORTEK=m
-CONFIG_HID_PANTHERLORD=m
-CONFIG_HID_PETALYNX=m
-CONFIG_HID_SAMSUNG=m
-CONFIG_HID_SUNPLUS=m
-CONFIG_HID_GREENASIA=m
-CONFIG_HID_SMARTJOYPLUS=m
-CONFIG_HID_TOPSEED=m
-CONFIG_HID_THRUSTMASTER=m
-CONFIG_HID_ZEROPLUS=m
-CONFIG_USB_HID=m
CONFIG_USB=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_STORAGE=y
diff --git a/arch/parisc/configs/generic-64bit_defconfig b/arch/parisc/configs/generic-64bit_defconfig
index 5874cebee077..28c1b5de044e 100644
--- a/arch/parisc/configs/generic-64bit_defconfig
+++ b/arch/parisc/configs/generic-64bit_defconfig
@@ -24,7 +24,6 @@ CONFIG_MODVERSIONS=y
CONFIG_BLK_DEV_INTEGRITY=y
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_PA8X00=y
-CONFIG_MLONGCALLS=y
CONFIG_64BIT=y
CONFIG_SMP=y
# CONFIG_COMPACTION is not set
@@ -68,7 +67,6 @@ CONFIG_IDE_GD=m
CONFIG_IDE_GD_ATAPI=y
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_NS87415=y
-CONFIG_BLK_DEV_SIIMAGE=y
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SR=y
@@ -82,6 +80,7 @@ CONFIG_SCSI_ZALON=y
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_DH=y
CONFIG_ATA=y
+CONFIG_PATA_SIL680=y
CONFIG_ATA_GENERIC=y
CONFIG_MD=y
CONFIG_MD_LINEAR=m
@@ -162,7 +161,7 @@ CONFIG_SLIP_MODE_SLIP6=y
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_HIL_OLD is not set
# CONFIG_KEYBOARD_HIL is not set
-# CONFIG_INPUT_MOUSE is not set
+# CONFIG_MOUSE_PS2 is not set
CONFIG_INPUT_MISC=y
CONFIG_SERIO_SERPORT=m
# CONFIG_HP_SDC is not set
@@ -216,32 +215,7 @@ CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
-CONFIG_HID=m
CONFIG_HIDRAW=y
-CONFIG_HID_DRAGONRISE=m
-CONFIG_DRAGONRISE_FF=y
-CONFIG_HID_KYE=m
-CONFIG_HID_GYRATION=m
-CONFIG_HID_TWINHAN=m
-CONFIG_LOGITECH_FF=y
-CONFIG_LOGIRUMBLEPAD2_FF=y
-CONFIG_HID_NTRIG=m
-CONFIG_HID_PANTHERLORD=m
-CONFIG_PANTHERLORD_FF=y
-CONFIG_HID_PETALYNX=m
-CONFIG_HID_SAMSUNG=m
-CONFIG_HID_SONY=m
-CONFIG_HID_SUNPLUS=m
-CONFIG_HID_GREENASIA=m
-CONFIG_GREENASIA_FF=y
-CONFIG_HID_SMARTJOYPLUS=m
-CONFIG_SMARTJOYPLUS_FF=y
-CONFIG_HID_TOPSEED=m
-CONFIG_HID_THRUSTMASTER=m
-CONFIG_THRUSTMASTER_FF=y
-CONFIG_HID_ZEROPLUS=m
-CONFIG_ZEROPLUS_FF=y
-CONFIG_USB_HID=m
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
CONFIG_USB=y
@@ -251,13 +225,8 @@ CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_MON=m
CONFIG_USB_WUSB_CBAF=m
CONFIG_USB_XHCI_HCD=m
-CONFIG_USB_EHCI_HCD=m
-CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_R8A66597_HCD=m
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_WDM=m
-CONFIG_USB_TMC=m
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_TRIGGERS=y
diff --git a/arch/parisc/include/asm/serial.h b/arch/parisc/include/asm/serial.h
index d7e3cc60dbc3..77e9b67c87ee 100644
--- a/arch/parisc/include/asm/serial.h
+++ b/arch/parisc/include/asm/serial.h
@@ -6,5 +6,3 @@
* This is used for 16550-compatible UARTs
*/
#define BASE_BAUD ( 1843200 / 16 )
-
-#define SERIAL_PORT_DFNS
diff --git a/arch/parisc/kernel/hardware.c b/arch/parisc/kernel/hardware.c
index 06cb3992907e..608716f8496b 100644
--- a/arch/parisc/kernel/hardware.c
+++ b/arch/parisc/kernel/hardware.c
@@ -36,6 +36,9 @@
* HP PARISC Hardware Database
* Access to this database is only possible during bootup
* so don't reference this table after starting the init process
+ *
+ * NOTE: Product names which are listed here and ends with a '?'
+ * are guessed. If you know the correct name, please let us know.
*/
static struct hp_hardware hp_hardware_list[] = {
@@ -222,7 +225,7 @@ static struct hp_hardware hp_hardware_list[] = {
{HPHW_NPROC,0x5DD,0x4,0x81,"Duet W2"},
{HPHW_NPROC,0x5DE,0x4,0x81,"Piccolo W+"},
{HPHW_NPROC,0x5DF,0x4,0x81,"Cantata W2"},
- {HPHW_NPROC,0x5DF,0x0,0x00,"Marcato W+? (rp5470)"},
+ {HPHW_NPROC,0x5DF,0x0,0x00,"Marcato W+ (rp5470)?"},
{HPHW_NPROC,0x5E0,0x4,0x91,"Cantata DC- W2"},
{HPHW_NPROC,0x5E1,0x4,0x91,"Crescendo DC- W2"},
{HPHW_NPROC,0x5E2,0x4,0x91,"Crescendo 650 W2"},
@@ -276,9 +279,11 @@ static struct hp_hardware hp_hardware_list[] = {
{HPHW_NPROC,0x888,0x4,0x91,"Storm Peak Fast DC-"},
{HPHW_NPROC,0x889,0x4,0x91,"Storm Peak Fast"},
{HPHW_NPROC,0x88A,0x4,0x91,"Crestone Peak Slow"},
+ {HPHW_NPROC,0x88B,0x4,0x91,"Crestone Peak Fast?"},
{HPHW_NPROC,0x88C,0x4,0x91,"Orca Mako+"},
{HPHW_NPROC,0x88D,0x4,0x91,"Rainier/Medel Mako+ Slow"},
{HPHW_NPROC,0x88E,0x4,0x91,"Rainier/Medel Mako+ Fast"},
+ {HPHW_NPROC,0x892,0x4,0x91,"Mt. Hamilton Slow Mako+?"},
{HPHW_NPROC,0x894,0x4,0x91,"Mt. Hamilton Fast Mako+"},
{HPHW_NPROC,0x895,0x4,0x91,"Storm Peak Slow Mako+"},
{HPHW_NPROC,0x896,0x4,0x91,"Storm Peak Fast Mako+"},
diff --git a/arch/parisc/kernel/head.S b/arch/parisc/kernel/head.S
index d2d58258aea6..d4dc588c0dc1 100644
--- a/arch/parisc/kernel/head.S
+++ b/arch/parisc/kernel/head.S
@@ -41,9 +41,7 @@ END(boot_args)
.import fault_vector_11,code /* IVA parisc 1.1 32 bit */
.import $global$ /* forward declaration */
#endif /*!CONFIG_64BIT*/
- .export _stext,data /* Kernel want it this way! */
-_stext:
-ENTRY(stext)
+ENTRY(parisc_kernel_start)
.proc
.callinfo
@@ -347,7 +345,7 @@ smp_slave_stext:
.procend
#endif /* CONFIG_SMP */
-ENDPROC(stext)
+ENDPROC(parisc_kernel_start)
#ifndef CONFIG_64BIT
.section .data..read_mostly
diff --git a/arch/parisc/kernel/sys_parisc.c b/arch/parisc/kernel/sys_parisc.c
index 5dfd248e3f1a..0d3a9d4927b5 100644
--- a/arch/parisc/kernel/sys_parisc.c
+++ b/arch/parisc/kernel/sys_parisc.c
@@ -61,8 +61,15 @@ static int get_offset(struct address_space *mapping)
return (unsigned long) mapping >> 8;
}
-static unsigned long get_shared_area(struct address_space *mapping,
- unsigned long addr, unsigned long len, unsigned long pgoff)
+static unsigned long shared_align_offset(struct file *filp, unsigned long pgoff)
+{
+ struct address_space *mapping = filp ? filp->f_mapping : NULL;
+
+ return (get_offset(mapping) + pgoff) << PAGE_SHIFT;
+}
+
+static unsigned long get_shared_area(struct file *filp, unsigned long addr,
+ unsigned long len, unsigned long pgoff)
{
struct vm_unmapped_area_info info;
@@ -71,7 +78,7 @@ static unsigned long get_shared_area(struct address_space *mapping,
info.low_limit = PAGE_ALIGN(addr);
info.high_limit = TASK_SIZE;
info.align_mask = PAGE_MASK & (SHMLBA - 1);
- info.align_offset = (get_offset(mapping) + pgoff) << PAGE_SHIFT;
+ info.align_offset = shared_align_offset(filp, pgoff);
return vm_unmapped_area(&info);
}
@@ -82,20 +89,18 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr,
return -ENOMEM;
if (flags & MAP_FIXED) {
if ((flags & MAP_SHARED) &&
- (addr - (pgoff << PAGE_SHIFT)) & (SHMLBA - 1))
+ (addr - shared_align_offset(filp, pgoff)) & (SHMLBA - 1))
return -EINVAL;
return addr;
}
if (!addr)
addr = TASK_UNMAPPED_BASE;
- if (filp) {
- addr = get_shared_area(filp->f_mapping, addr, len, pgoff);
- } else if(flags & MAP_SHARED) {
- addr = get_shared_area(NULL, addr, len, pgoff);
- } else {
+ if (filp || (flags & MAP_SHARED))
+ addr = get_shared_area(filp, addr, len, pgoff);
+ else
addr = get_unshared_area(addr, len);
- }
+
return addr;
}
diff --git a/arch/parisc/kernel/unwind.c b/arch/parisc/kernel/unwind.c
index 76ed62ed785b..ddd988b267a9 100644
--- a/arch/parisc/kernel/unwind.c
+++ b/arch/parisc/kernel/unwind.c
@@ -168,7 +168,7 @@ void unwind_table_remove(struct unwind_table *table)
}
/* Called from setup_arch to import the kernel unwind info */
-int unwind_init(void)
+int __init unwind_init(void)
{
long start, stop;
register unsigned long gp __asm__ ("r27");
@@ -233,7 +233,6 @@ static void unwind_frame_regs(struct unwind_frame_info *info)
e = find_unwind_entry(info->ip);
if (e == NULL) {
unsigned long sp;
- extern char _stext[], _etext[];
dbg("Cannot find unwind entry for 0x%lx; forced unwinding\n", info->ip);
@@ -281,8 +280,7 @@ static void unwind_frame_regs(struct unwind_frame_info *info)
break;
info->prev_ip = tmp;
sp = info->prev_sp;
- } while (info->prev_ip < (unsigned long)_stext ||
- info->prev_ip > (unsigned long)_etext);
+ } while (!kernel_text_address(info->prev_ip));
info->rp = 0;
@@ -435,9 +433,8 @@ unsigned long return_address(unsigned int level)
do {
if (unwind_once(&info) < 0 || info.ip == 0)
return 0;
- if (!__kernel_text_address(info.ip)) {
+ if (!kernel_text_address(info.ip))
return 0;
- }
} while (info.ip && level--);
return info.ip;
diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S
index 4bb095a2f6fc..0dacc5ca555a 100644
--- a/arch/parisc/kernel/vmlinux.lds.S
+++ b/arch/parisc/kernel/vmlinux.lds.S
@@ -6,24 +6,19 @@
* Copyright (C) 2000 Michael Ang <mang with subcarrier.org>
* Copyright (C) 2002 Randolph Chung <tausq with parisc-linux.org>
* Copyright (C) 2003 James Bottomley <jejb with parisc-linux.org>
- * Copyright (C) 2006 Helge Deller <deller@gmx.de>
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ * Copyright (C) 2006-2013 Helge Deller <deller@gmx.de>
+ */
+
+/*
+ * Put page table entries (swapper_pg_dir) as the first thing in .bss. This
+ * will ensure that it has .bss alignment (PAGE_SIZE).
*/
+#define BSS_FIRST_SECTIONS *(.data..vm0.pmd) \
+ *(.data..vm0.pgd) \
+ *(.data..vm0.pte)
+
#include <asm-generic/vmlinux.lds.h>
+
/* needed for the processor specific cache alignment size */
#include <asm/cache.h>
#include <asm/page.h>
@@ -39,7 +34,7 @@ OUTPUT_FORMAT("elf64-hppa-linux")
OUTPUT_ARCH(hppa:hppa2.0w)
#endif
-ENTRY(_stext)
+ENTRY(parisc_kernel_start)
#ifndef CONFIG_64BIT
jiffies = jiffies_64 + 4;
#else
@@ -49,11 +44,29 @@ SECTIONS
{
. = KERNEL_BINARY_TEXT_START;
+ __init_begin = .;
+ HEAD_TEXT_SECTION
+ INIT_TEXT_SECTION(8)
+
+ . = ALIGN(PAGE_SIZE);
+ INIT_DATA_SECTION(PAGE_SIZE)
+ /* we have to discard exit text and such at runtime, not link time */
+ .exit.text :
+ {
+ EXIT_TEXT
+ }
+ .exit.data :
+ {
+ EXIT_DATA
+ }
+ PERCPU_SECTION(8)
+ . = ALIGN(PAGE_SIZE);
+ __init_end = .;
+ /* freed after init ends here */
+
_text = .; /* Text and read-only data */
- .head ALIGN(16) : {
- HEAD_TEXT
- } = 0
- .text ALIGN(16) : {
+ _stext = .;
+ .text ALIGN(PAGE_SIZE) : {
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
@@ -68,21 +81,28 @@ SECTIONS
*(.lock.text) /* out-of-line lock text */
*(.gnu.warning)
}
- /* End of text section */
+ . = ALIGN(PAGE_SIZE);
_etext = .;
+ /* End of text section */
/* Start of data section */
_sdata = .;
- RODATA
+ RO_DATA_SECTION(8)
- /* writeable */
- /* Make sure this is page aligned so
- * that we can properly leave these
- * as writable
- */
- . = ALIGN(PAGE_SIZE);
- data_start = .;
+#ifdef CONFIG_64BIT
+ . = ALIGN(16);
+ /* Linkage tables */
+ .opd : {
+ *(.opd)
+ } PROVIDE (__gp = .);
+ .plt : {
+ *(.plt)
+ }
+ .dlt : {
+ *(.dlt)
+ }
+#endif
/* unwind info */
.PARISC.unwind : {
@@ -91,7 +111,15 @@ SECTIONS
__stop___unwind = .;
}
- EXCEPTION_TABLE(16)
+ /* writeable */
+ /* Make sure this is page aligned so
+ * that we can properly leave these
+ * as writable
+ */
+ . = ALIGN(PAGE_SIZE);
+ data_start = .;
+
+ EXCEPTION_TABLE(8)
NOTES
/* Data */
@@ -107,54 +135,8 @@ SECTIONS
_edata = .;
/* BSS */
- __bss_start = .;
- /* page table entries need to be PAGE_SIZE aligned */
- . = ALIGN(PAGE_SIZE);
- .data..vmpages : {
- *(.data..vm0.pmd)
- *(.data..vm0.pgd)
- *(.data..vm0.pte)
- }
- .bss : {
- *(.bss)
- *(COMMON)
- }
- __bss_stop = .;
-
-#ifdef CONFIG_64BIT
- . = ALIGN(16);
- /* Linkage tables */
- .opd : {
- *(.opd)
- } PROVIDE (__gp = .);
- .plt : {
- *(.plt)
- }
- .dlt : {
- *(.dlt)
- }
-#endif
+ BSS_SECTION(PAGE_SIZE, PAGE_SIZE, 8)
- /* reserve space for interrupt stack by aligning __init* to 16k */
- . = ALIGN(16384);
- __init_begin = .;
- INIT_TEXT_SECTION(16384)
- . = ALIGN(PAGE_SIZE);
- INIT_DATA_SECTION(16)
- /* we have to discard exit text and such at runtime, not link time */
- .exit.text :
- {
- EXIT_TEXT
- }
- .exit.data :
- {
- EXIT_DATA
- }
-
- PERCPU_SECTION(L1_CACHE_BYTES)
- . = ALIGN(PAGE_SIZE);
- __init_end = .;
- /* freed after init ends here */
_end = . ;
STABS_DEBUG
diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c
index b0f96c0e6316..96f8168cf4ec 100644
--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -32,6 +32,7 @@
#include <asm/sections.h>
extern int data_start;
+extern void parisc_kernel_start(void); /* Kernel entry point in head.S */
#if PT_NLEVELS == 3
/* NOTE: This layout exactly conforms to the hybrid L2/L3 page table layout
@@ -324,8 +325,9 @@ static void __init setup_bootmem(void)
reserve_bootmem_node(NODE_DATA(0), 0UL,
(unsigned long)(PAGE0->mem_free +
PDC_CONSOLE_IO_IODC_SIZE), BOOTMEM_DEFAULT);
- reserve_bootmem_node(NODE_DATA(0), __pa((unsigned long)_text),
- (unsigned long)(_end - _text), BOOTMEM_DEFAULT);
+ reserve_bootmem_node(NODE_DATA(0), __pa(KERNEL_BINARY_TEXT_START),
+ (unsigned long)(_end - KERNEL_BINARY_TEXT_START),
+ BOOTMEM_DEFAULT);
reserve_bootmem_node(NODE_DATA(0), (bootmap_start_pfn << PAGE_SHIFT),
((bootmap_pfn - bootmap_start_pfn) << PAGE_SHIFT),
BOOTMEM_DEFAULT);
@@ -378,6 +380,17 @@ static void __init setup_bootmem(void)
request_resource(&sysram_resources[0], &pdcdata_resource);
}
+static int __init parisc_text_address(unsigned long vaddr)
+{
+ static unsigned long head_ptr __initdata;
+
+ if (!head_ptr)
+ head_ptr = PAGE_MASK & (unsigned long)
+ dereference_function_descriptor(&parisc_kernel_start);
+
+ return core_kernel_text(vaddr) || vaddr == head_ptr;
+}
+
static void __init map_pages(unsigned long start_vaddr,
unsigned long start_paddr, unsigned long size,
pgprot_t pgprot, int force)
@@ -466,7 +479,7 @@ static void __init map_pages(unsigned long start_vaddr,
*/
if (force)
pte = __mk_pte(address, pgprot);
- else if (core_kernel_text(vaddr) &&
+ else if (parisc_text_address(vaddr) &&
address != fv_addr)
pte = __mk_pte(address, PAGE_KERNEL_EXEC);
else
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 8a2463670a5b..0f4344e6fbca 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -75,8 +75,10 @@ LDEMULATION := lppc
GNUTARGET := powerpcle
MULTIPLEWORD := -mno-multiple
else
+ifeq ($(call cc-option-yn,-mbig-endian),y)
override CC += -mbig-endian
override AS += -mbig-endian
+endif
override LD += -EB
LDEMULATION := ppc
GNUTARGET := powerpc
@@ -128,7 +130,12 @@ CFLAGS-$(CONFIG_POWER5_CPU) += $(call cc-option,-mcpu=power5)
CFLAGS-$(CONFIG_POWER6_CPU) += $(call cc-option,-mcpu=power6)
CFLAGS-$(CONFIG_POWER7_CPU) += $(call cc-option,-mcpu=power7)
+# Altivec option not allowed with e500mc64 in GCC.
+ifeq ($(CONFIG_ALTIVEC),y)
+E5500_CPU := -mcpu=powerpc64
+else
E5500_CPU := $(call cc-option,-mcpu=e500mc64,-mcpu=powerpc64)
+endif
CFLAGS-$(CONFIG_E5500_CPU) += $(E5500_CPU)
CFLAGS-$(CONFIG_E6500_CPU) += $(call cc-option,-mcpu=e6500,$(E5500_CPU))
diff --git a/arch/powerpc/boot/dts/mpc5121.dtsi b/arch/powerpc/boot/dts/mpc5121.dtsi
index bd14c00e5146..2d7cb04ac962 100644
--- a/arch/powerpc/boot/dts/mpc5121.dtsi
+++ b/arch/powerpc/boot/dts/mpc5121.dtsi
@@ -77,7 +77,6 @@
compatible = "fsl,mpc5121-immr";
#address-cells = <1>;
#size-cells = <1>;
- #interrupt-cells = <2>;
ranges = <0x0 0x80000000 0x400000>;
reg = <0x80000000 0x400000>;
bus-frequency = <66000000>; /* 66 MHz ips bus */
diff --git a/arch/powerpc/boot/dts/xcalibur1501.dts b/arch/powerpc/boot/dts/xcalibur1501.dts
index cc00f4ddd9a7..c409cbafb126 100644
--- a/arch/powerpc/boot/dts/xcalibur1501.dts
+++ b/arch/powerpc/boot/dts/xcalibur1501.dts
@@ -637,14 +637,14 @@
tlu@2f000 {
compatible = "fsl,mpc8572-tlu", "fsl_tlu";
reg = <0x2f000 0x1000>;
- interupts = <61 2 >;
+ interrupts = <61 2>;
interrupt-parent = <&mpic>;
};
tlu@15000 {
compatible = "fsl,mpc8572-tlu", "fsl_tlu";
reg = <0x15000 0x1000>;
- interupts = <75 2>;
+ interrupts = <75 2>;
interrupt-parent = <&mpic>;
};
};
diff --git a/arch/powerpc/boot/dts/xpedite5301.dts b/arch/powerpc/boot/dts/xpedite5301.dts
index 53c1c6a9752f..04cb410da48b 100644
--- a/arch/powerpc/boot/dts/xpedite5301.dts
+++ b/arch/powerpc/boot/dts/xpedite5301.dts
@@ -547,14 +547,14 @@
tlu@2f000 {
compatible = "fsl,mpc8572-tlu", "fsl_tlu";
reg = <0x2f000 0x1000>;
- interupts = <61 2 >;
+ interrupts = <61 2>;
interrupt-parent = <&mpic>;
};
tlu@15000 {
compatible = "fsl,mpc8572-tlu", "fsl_tlu";
reg = <0x15000 0x1000>;
- interupts = <75 2>;
+ interrupts = <75 2>;
interrupt-parent = <&mpic>;
};
};
diff --git a/arch/powerpc/boot/dts/xpedite5330.dts b/arch/powerpc/boot/dts/xpedite5330.dts
index 215225983150..73f8620f1ce7 100644
--- a/arch/powerpc/boot/dts/xpedite5330.dts
+++ b/arch/powerpc/boot/dts/xpedite5330.dts
@@ -583,14 +583,14 @@
tlu@2f000 {
compatible = "fsl,mpc8572-tlu", "fsl_tlu";
reg = <0x2f000 0x1000>;
- interupts = <61 2 >;
+ interrupts = <61 2>;
interrupt-parent = <&mpic>;
};
tlu@15000 {
compatible = "fsl,mpc8572-tlu", "fsl_tlu";
reg = <0x15000 0x1000>;
- interupts = <75 2>;
+ interrupts = <75 2>;
interrupt-parent = <&mpic>;
};
};
diff --git a/arch/powerpc/boot/dts/xpedite5370.dts b/arch/powerpc/boot/dts/xpedite5370.dts
index 11dbda10d756..cd0ea2b99362 100644
--- a/arch/powerpc/boot/dts/xpedite5370.dts
+++ b/arch/powerpc/boot/dts/xpedite5370.dts
@@ -545,14 +545,14 @@
tlu@2f000 {
compatible = "fsl,mpc8572-tlu", "fsl_tlu";
reg = <0x2f000 0x1000>;
- interupts = <61 2 >;
+ interrupts = <61 2>;
interrupt-parent = <&mpic>;
};
tlu@15000 {
compatible = "fsl,mpc8572-tlu", "fsl_tlu";
reg = <0x15000 0x1000>;
- interupts = <75 2>;
+ interrupts = <75 2>;
interrupt-parent = <&mpic>;
};
};
diff --git a/arch/powerpc/boot/util.S b/arch/powerpc/boot/util.S
index 5143228e3e5f..6636b1d7821b 100644
--- a/arch/powerpc/boot/util.S
+++ b/arch/powerpc/boot/util.S
@@ -71,18 +71,32 @@ udelay:
add r4,r4,r5
addi r4,r4,-1
divw r4,r4,r5 /* BUS ticks */
+#ifdef CONFIG_8xx
+1: mftbu r5
+ mftb r6
+ mftbu r7
+#else
1: mfspr r5, SPRN_TBRU
mfspr r6, SPRN_TBRL
mfspr r7, SPRN_TBRU
+#endif
cmpw 0,r5,r7
bne 1b /* Get [synced] base time */
addc r9,r6,r4 /* Compute end time */
addze r8,r5
+#ifdef CONFIG_8xx
+2: mftbu r5
+#else
2: mfspr r5, SPRN_TBRU
+#endif
cmpw 0,r5,r8
blt 2b
bgt 3f
+#ifdef CONFIG_8xx
+ mftb r6
+#else
mfspr r6, SPRN_TBRL
+#endif
cmpw 0,r6,r9
blt 2b
3: blr
diff --git a/arch/powerpc/configs/52xx/cm5200_defconfig b/arch/powerpc/configs/52xx/cm5200_defconfig
index 69b57daf402e..0b88c7b30bb9 100644
--- a/arch/powerpc/configs/52xx/cm5200_defconfig
+++ b/arch/powerpc/configs/52xx/cm5200_defconfig
@@ -12,7 +12,6 @@ CONFIG_EXPERT=y
CONFIG_PPC_MPC52xx=y
CONFIG_PPC_MPC5200_SIMPLE=y
# CONFIG_PPC_PMAC is not set
-CONFIG_PPC_BESTCOMM=y
CONFIG_SPARSE_IRQ=y
CONFIG_PM=y
# CONFIG_PCI is not set
@@ -71,6 +70,8 @@ CONFIG_USB_DEVICEFS=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
CONFIG_USB_STORAGE=y
+CONFIG_DMADEVICES=y
+CONFIG_PPC_BESTCOMM=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
diff --git a/arch/powerpc/configs/52xx/lite5200b_defconfig b/arch/powerpc/configs/52xx/lite5200b_defconfig
index f3638ae0a627..104a332e79ab 100644
--- a/arch/powerpc/configs/52xx/lite5200b_defconfig
+++ b/arch/powerpc/configs/52xx/lite5200b_defconfig
@@ -15,7 +15,6 @@ CONFIG_PPC_MPC52xx=y
CONFIG_PPC_MPC5200_SIMPLE=y
CONFIG_PPC_LITE5200=y
# CONFIG_PPC_PMAC is not set
-CONFIG_PPC_BESTCOMM=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_SPARSE_IRQ=y
@@ -59,6 +58,8 @@ CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MPC=y
# CONFIG_HWMON is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_DMADEVICES=y
+CONFIG_PPC_BESTCOMM=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
diff --git a/arch/powerpc/configs/52xx/motionpro_defconfig b/arch/powerpc/configs/52xx/motionpro_defconfig
index 0c7de9620ea6..0d13ad7e4478 100644
--- a/arch/powerpc/configs/52xx/motionpro_defconfig
+++ b/arch/powerpc/configs/52xx/motionpro_defconfig
@@ -12,7 +12,6 @@ CONFIG_EXPERT=y
CONFIG_PPC_MPC52xx=y
CONFIG_PPC_MPC5200_SIMPLE=y
# CONFIG_PPC_PMAC is not set
-CONFIG_PPC_BESTCOMM=y
CONFIG_SPARSE_IRQ=y
CONFIG_PM=y
# CONFIG_PCI is not set
@@ -84,6 +83,8 @@ CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_DS1307=y
+CONFIG_DMADEVICES=y
+CONFIG_PPC_BESTCOMM=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
diff --git a/arch/powerpc/configs/52xx/pcm030_defconfig b/arch/powerpc/configs/52xx/pcm030_defconfig
index 22e719575c60..430aa182fa1c 100644
--- a/arch/powerpc/configs/52xx/pcm030_defconfig
+++ b/arch/powerpc/configs/52xx/pcm030_defconfig
@@ -21,7 +21,6 @@ CONFIG_MODULE_UNLOAD=y
CONFIG_PPC_MPC52xx=y
CONFIG_PPC_MPC5200_SIMPLE=y
# CONFIG_PPC_PMAC is not set
-CONFIG_PPC_BESTCOMM=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_HZ_100=y
@@ -87,6 +86,8 @@ CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
CONFIG_USB_STORAGE=m
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_PCF8563=m
+CONFIG_DMADEVICES=y
+CONFIG_PPC_BESTCOMM=y
CONFIG_EXT2_FS=m
CONFIG_EXT3_FS=m
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
diff --git a/arch/powerpc/configs/52xx/tqm5200_defconfig b/arch/powerpc/configs/52xx/tqm5200_defconfig
index 716a37be16e3..7af4c5bb7c63 100644
--- a/arch/powerpc/configs/52xx/tqm5200_defconfig
+++ b/arch/powerpc/configs/52xx/tqm5200_defconfig
@@ -17,7 +17,6 @@ CONFIG_PPC_MPC52xx=y
CONFIG_PPC_MPC5200_SIMPLE=y
CONFIG_PPC_MPC5200_BUGFIX=y
# CONFIG_PPC_PMAC is not set
-CONFIG_PPC_BESTCOMM=y
CONFIG_PM=y
# CONFIG_PCI is not set
CONFIG_NET=y
@@ -86,6 +85,8 @@ CONFIG_USB_STORAGE=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_DS1374=y
+CONFIG_DMADEVICES=y
+CONFIG_PPC_BESTCOMM=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig
index 6640a35bebb7..8b682d1cf4d6 100644
--- a/arch/powerpc/configs/mpc5200_defconfig
+++ b/arch/powerpc/configs/mpc5200_defconfig
@@ -15,7 +15,6 @@ CONFIG_PPC_MEDIA5200=y
CONFIG_PPC_MPC5200_BUGFIX=y
CONFIG_PPC_MPC5200_LPBFIFO=m
# CONFIG_PPC_PMAC is not set
-CONFIG_PPC_BESTCOMM=y
CONFIG_SIMPLE_GPIO=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
@@ -125,6 +124,8 @@ CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_DS1374=y
CONFIG_RTC_DRV_PCF8563=m
+CONFIG_DMADEVICES=y
+CONFIG_PPC_BESTCOMM=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
diff --git a/arch/powerpc/configs/pasemi_defconfig b/arch/powerpc/configs/pasemi_defconfig
index bd8a6f71944f..cec044a3ff69 100644
--- a/arch/powerpc/configs/pasemi_defconfig
+++ b/arch/powerpc/configs/pasemi_defconfig
@@ -2,7 +2,6 @@ CONFIG_PPC64=y
CONFIG_ALTIVEC=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
-CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
@@ -45,8 +44,9 @@ CONFIG_INET_AH=y
CONFIG_INET_ESP=y
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
CONFIG_MTD=y
-CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_SLRAM=y
CONFIG_MTD_PHRAM=y
@@ -88,7 +88,6 @@ CONFIG_BLK_DEV_DM=y
CONFIG_DM_CRYPT=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
-CONFIG_MII=y
CONFIG_TIGON3=y
CONFIG_E1000=y
CONFIG_PASEMI_MAC=y
@@ -174,8 +173,8 @@ CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_CRC_CCITT=y
CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_SCHED_DEBUG is not set
diff --git a/arch/powerpc/include/asm/pgalloc-32.h b/arch/powerpc/include/asm/pgalloc-32.h
index 27b2386f738a..842846c1b711 100644
--- a/arch/powerpc/include/asm/pgalloc-32.h
+++ b/arch/powerpc/include/asm/pgalloc-32.h
@@ -84,10 +84,8 @@ static inline void pgtable_free_tlb(struct mmu_gather *tlb,
static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t table,
unsigned long address)
{
- struct page *page = page_address(table);
-
tlb_flush_pgtable(tlb, address);
- pgtable_page_dtor(page);
- pgtable_free_tlb(tlb, page, 0);
+ pgtable_page_dtor(table);
+ pgtable_free_tlb(tlb, page_address(table), 0);
}
#endif /* _ASM_POWERPC_PGALLOC_32_H */
diff --git a/arch/powerpc/include/asm/pgalloc-64.h b/arch/powerpc/include/asm/pgalloc-64.h
index 16cb92d215d2..4b0be20fcbfd 100644
--- a/arch/powerpc/include/asm/pgalloc-64.h
+++ b/arch/powerpc/include/asm/pgalloc-64.h
@@ -16,6 +16,7 @@ struct vmemmap_backing {
unsigned long phys;
unsigned long virt_addr;
};
+extern struct vmemmap_backing *vmemmap_list;
/*
* Functions that deal with pagetables that could be at any level of
@@ -147,11 +148,9 @@ static inline void pgtable_free_tlb(struct mmu_gather *tlb,
static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t table,
unsigned long address)
{
- struct page *page = page_address(table);
-
tlb_flush_pgtable(tlb, address);
- pgtable_page_dtor(page);
- pgtable_free_tlb(tlb, page, 0);
+ pgtable_page_dtor(table);
+ pgtable_free_tlb(tlb, page_address(table), 0);
}
#else /* if CONFIG_PPC_64K_PAGES */
diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h
index 3c1acc31a092..f595b98079ee 100644
--- a/arch/powerpc/include/asm/ppc_asm.h
+++ b/arch/powerpc/include/asm/ppc_asm.h
@@ -366,6 +366,8 @@ BEGIN_FTR_SECTION_NESTED(96); \
cmpwi dest,0; \
beq- 90b; \
END_FTR_SECTION_NESTED(CPU_FTR_CELL_TB_BUG, CPU_FTR_CELL_TB_BUG, 96)
+#elif defined(CONFIG_8xx)
+#define MFTB(dest) mftb dest
#else
#define MFTB(dest) mfspr dest, SPRN_TBRL
#endif
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index 5c45787d551e..fa8388ed94c5 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -1174,12 +1174,19 @@
#else /* __powerpc64__ */
+#if defined(CONFIG_8xx)
+#define mftbl() ({unsigned long rval; \
+ asm volatile("mftbl %0" : "=r" (rval)); rval;})
+#define mftbu() ({unsigned long rval; \
+ asm volatile("mftbu %0" : "=r" (rval)); rval;})
+#else
#define mftbl() ({unsigned long rval; \
asm volatile("mfspr %0, %1" : "=r" (rval) : \
"i" (SPRN_TBRL)); rval;})
#define mftbu() ({unsigned long rval; \
asm volatile("mfspr %0, %1" : "=r" (rval) : \
"i" (SPRN_TBRU)); rval;})
+#endif
#endif /* !__powerpc64__ */
#define mttbl(v) asm volatile("mttbl %0":: "r"(v))
diff --git a/arch/powerpc/include/asm/timex.h b/arch/powerpc/include/asm/timex.h
index 18908caa1f3b..2cf846edb3fc 100644
--- a/arch/powerpc/include/asm/timex.h
+++ b/arch/powerpc/include/asm/timex.h
@@ -29,7 +29,11 @@ static inline cycles_t get_cycles(void)
ret = 0;
__asm__ __volatile__(
+#ifdef CONFIG_8xx
+ "97: mftb %0\n"
+#else
"97: mfspr %0, %2\n"
+#endif
"99:\n"
".section __ftr_fixup,\"a\"\n"
".align 2\n"
@@ -41,7 +45,11 @@ static inline cycles_t get_cycles(void)
" .long 0\n"
" .long 0\n"
".previous"
+#ifdef CONFIG_8xx
+ : "=r" (ret) : "i" (CPU_FTR_601));
+#else
: "=r" (ret) : "i" (CPU_FTR_601), "i" (SPRN_TBRL));
+#endif
return ret;
#endif
}
diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c
index e1ec57e87b3b..75d4f7340da8 100644
--- a/arch/powerpc/kernel/machine_kexec.c
+++ b/arch/powerpc/kernel/machine_kexec.c
@@ -18,6 +18,7 @@
#include <linux/ftrace.h>
#include <asm/machdep.h>
+#include <asm/pgalloc.h>
#include <asm/prom.h>
#include <asm/sections.h>
@@ -75,6 +76,17 @@ void arch_crash_save_vmcoreinfo(void)
#ifndef CONFIG_NEED_MULTIPLE_NODES
VMCOREINFO_SYMBOL(contig_page_data);
#endif
+#if defined(CONFIG_PPC64) && defined(CONFIG_SPARSEMEM_VMEMMAP)
+ VMCOREINFO_SYMBOL(vmemmap_list);
+ VMCOREINFO_SYMBOL(mmu_vmemmap_psize);
+ VMCOREINFO_SYMBOL(mmu_psize_defs);
+ VMCOREINFO_STRUCT_SIZE(vmemmap_backing);
+ VMCOREINFO_OFFSET(vmemmap_backing, list);
+ VMCOREINFO_OFFSET(vmemmap_backing, phys);
+ VMCOREINFO_OFFSET(vmemmap_backing, virt_addr);
+ VMCOREINFO_STRUCT_SIZE(mmu_psize_def);
+ VMCOREINFO_OFFSET(mmu_psize_def, shift);
+#endif
}
/*
@@ -136,7 +148,7 @@ void __init reserve_crashkernel(void)
* a small SLB (128MB) since the crash kernel needs to place
* itself and some stacks to be in the first segment.
*/
- crashk_res.start = min(0x80000000ULL, (ppc64_rma_size / 2));
+ crashk_res.start = min(0x8000000ULL, (ppc64_rma_size / 2));
#else
crashk_res.start = KDUMP_KERNELBASE;
#endif
diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S
index e59caf874d05..64bf8db12b15 100644
--- a/arch/powerpc/kernel/misc_64.S
+++ b/arch/powerpc/kernel/misc_64.S
@@ -246,8 +246,8 @@ _GLOBAL(__bswapdi2)
or r3,r7,r9
blr
-#if defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE)
+#ifdef CONFIG_PPC_EARLY_DEBUG_BOOTX
_GLOBAL(rmci_on)
sync
isync
@@ -277,6 +277,9 @@ _GLOBAL(rmci_off)
isync
sync
blr
+#endif /* CONFIG_PPC_EARLY_DEBUG_BOOTX */
+
+#if defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE)
/*
* Do an IO access in real mode
diff --git a/arch/powerpc/kernel/nvram_64.c b/arch/powerpc/kernel/nvram_64.c
index fd82c289ab1c..28b898e68185 100644
--- a/arch/powerpc/kernel/nvram_64.c
+++ b/arch/powerpc/kernel/nvram_64.c
@@ -210,7 +210,7 @@ static void __init nvram_print_partitions(char * label)
printk(KERN_WARNING "--------%s---------\n", label);
printk(KERN_WARNING "indx\t\tsig\tchks\tlen\tname\n");
list_for_each_entry(tmp_part, &nvram_partitions, partition) {
- printk(KERN_WARNING "%4d \t%02x\t%02x\t%d\t%12s\n",
+ printk(KERN_WARNING "%4d \t%02x\t%02x\t%d\t%12.12s\n",
tmp_part->index, tmp_part->header.signature,
tmp_part->header.checksum, tmp_part->header.length,
tmp_part->header.name);
diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c
index 1844298f5ea4..68027bfa5f8e 100644
--- a/arch/powerpc/kernel/signal_32.c
+++ b/arch/powerpc/kernel/signal_32.c
@@ -445,6 +445,12 @@ static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame,
#endif /* CONFIG_ALTIVEC */
if (copy_fpr_to_user(&frame->mc_fregs, current))
return 1;
+
+ /*
+ * Clear the MSR VSX bit to indicate there is no valid state attached
+ * to this context, except in the specific case below where we set it.
+ */
+ msr &= ~MSR_VSX;
#ifdef CONFIG_VSX
/*
* Copy VSR 0-31 upper half from thread_struct to local
@@ -457,15 +463,7 @@ static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame,
if (copy_vsx_to_user(&frame->mc_vsregs, current))
return 1;
msr |= MSR_VSX;
- } else if (!ctx_has_vsx_region)
- /*
- * With a small context structure we can't hold the VSX
- * registers, hence clear the MSR value to indicate the state
- * was not saved.
- */
- msr &= ~MSR_VSX;
-
-
+ }
#endif /* CONFIG_VSX */
#ifdef CONFIG_SPE
/* save spe registers */
diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c
index e66f67b8b9e6..42991045349f 100644
--- a/arch/powerpc/kernel/signal_64.c
+++ b/arch/powerpc/kernel/signal_64.c
@@ -122,6 +122,12 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
flush_fp_to_thread(current);
/* copy fpr regs and fpscr */
err |= copy_fpr_to_user(&sc->fp_regs, current);
+
+ /*
+ * Clear the MSR VSX bit to indicate there is no valid state attached
+ * to this context, except in the specific case below where we set it.
+ */
+ msr &= ~MSR_VSX;
#ifdef CONFIG_VSX
/*
* Copy VSX low doubleword to local buffer for formatting,
diff --git a/arch/powerpc/kernel/vdso32/gettimeofday.S b/arch/powerpc/kernel/vdso32/gettimeofday.S
index 6b1f2a6d5517..6b2b69616e77 100644
--- a/arch/powerpc/kernel/vdso32/gettimeofday.S
+++ b/arch/powerpc/kernel/vdso32/gettimeofday.S
@@ -232,9 +232,15 @@ __do_get_tspec:
lwz r6,(CFG_TB_ORIG_STAMP+4)(r9)
/* Get a stable TB value */
+#ifdef CONFIG_8xx
+2: mftbu r3
+ mftbl r4
+ mftbu r0
+#else
2: mfspr r3, SPRN_TBRU
mfspr r4, SPRN_TBRL
mfspr r0, SPRN_TBRU
+#endif
cmplw cr0,r3,r0
bne- 2b
diff --git a/arch/powerpc/mm/hugetlbpage-book3e.c b/arch/powerpc/mm/hugetlbpage-book3e.c
index 3bc700655fc8..74551b5e41e5 100644
--- a/arch/powerpc/mm/hugetlbpage-book3e.c
+++ b/arch/powerpc/mm/hugetlbpage-book3e.c
@@ -117,6 +117,5 @@ void flush_hugetlb_page(struct vm_area_struct *vma, unsigned long vmaddr)
struct hstate *hstate = hstate_file(vma->vm_file);
unsigned long tsize = huge_page_shift(hstate) - 10;
- __flush_tlb_page(vma ? vma->vm_mm : NULL, vmaddr, tsize, 0);
-
+ __flush_tlb_page(vma->vm_mm, vmaddr, tsize, 0);
}
diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c
index 41cd68dee681..358d74303138 100644
--- a/arch/powerpc/mm/tlb_nohash.c
+++ b/arch/powerpc/mm/tlb_nohash.c
@@ -305,7 +305,7 @@ void __flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr,
void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr)
{
#ifdef CONFIG_HUGETLB_PAGE
- if (is_vm_hugetlb_page(vma))
+ if (vma && is_vm_hugetlb_page(vma))
flush_hugetlb_page(vma, vmaddr);
#endif
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 132f8726a257..bca2465a9c34 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -404,13 +404,27 @@ config PPC_DOORBELL
endmenu
-config CPU_LITTLE_ENDIAN
- bool "Build little endian kernel"
- default n
+choice
+ prompt "Endianness selection"
+ default CPU_BIG_ENDIAN
help
This option selects whether a big endian or little endian kernel will
be built.
+config CPU_BIG_ENDIAN
+ bool "Build big endian kernel"
+ help
+ Build a big endian kernel.
+
+ If unsure, select this option.
+
+config CPU_LITTLE_ENDIAN
+ bool "Build little endian kernel"
+ help
+ Build a little endian kernel.
+
Note that if cross compiling a little endian kernel,
CROSS_COMPILE must point to a toolchain capable of targeting
little endian powerpc.
+
+endchoice
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 084cdfa40682..2c6d173842b2 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -720,6 +720,7 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb,
tbl->it_type = TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE;
}
iommu_init_table(tbl, phb->hose->node);
+ iommu_register_group(tbl, pci_domain_nr(pe->pbus), pe->pe_number);
if (pe->pdev)
set_iommu_table_base(&pe->pdev->dev, tbl);
diff --git a/arch/powerpc/sysdev/ppc4xx_ocm.c b/arch/powerpc/sysdev/ppc4xx_ocm.c
index b7c43453236d..85d9e37f5ccb 100644
--- a/arch/powerpc/sysdev/ppc4xx_ocm.c
+++ b/arch/powerpc/sysdev/ppc4xx_ocm.c
@@ -339,7 +339,7 @@ void *ppc4xx_ocm_alloc(phys_addr_t *phys, int size, int align,
if (IS_ERR_VALUE(offset))
continue;
- ocm_blk = kzalloc(sizeof(struct ocm_block *), GFP_KERNEL);
+ ocm_blk = kzalloc(sizeof(struct ocm_block), GFP_KERNEL);
if (!ocm_blk) {
printk(KERN_ERR "PPC4XX OCM: could not allocate ocm block");
rh_free(ocm_reg->rh, offset);
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 314fced4fc14..1e1a03d2d19f 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -101,7 +101,7 @@ config S390
select GENERIC_CPU_DEVICES if !SMP
select GENERIC_FIND_FIRST_BIT
select GENERIC_SMP_IDLE_THREAD
- select GENERIC_TIME_VSYSCALL_OLD
+ select GENERIC_TIME_VSYSCALL
select HAVE_ALIGNED_STRUCT_PAGE if SLUB
select HAVE_ARCH_JUMP_LABEL if !MARCH_G5
select HAVE_ARCH_SECCOMP_FILTER
@@ -347,14 +347,14 @@ config SMP
Even if you don't know what to do here, say Y.
config NR_CPUS
- int "Maximum number of CPUs (2-64)"
- range 2 64
+ int "Maximum number of CPUs (2-256)"
+ range 2 256
depends on SMP
default "32" if !64BIT
default "64" if 64BIT
help
This allows you to specify the maximum number of CPUs which this
- kernel will support. The maximum supported value is 64 and the
+ kernel will support. The maximum supported value is 256 and the
minimum value which makes sense is 2.
This is purely to save memory - each supported CPU adds
diff --git a/arch/s390/crypto/aes_s390.c b/arch/s390/crypto/aes_s390.c
index 46cae138ece2..b3feabd39f31 100644
--- a/arch/s390/crypto/aes_s390.c
+++ b/arch/s390/crypto/aes_s390.c
@@ -35,7 +35,6 @@ static u8 *ctrblk;
static char keylen_flag;
struct s390_aes_ctx {
- u8 iv[AES_BLOCK_SIZE];
u8 key[AES_MAX_KEY_SIZE];
long enc;
long dec;
@@ -56,8 +55,7 @@ struct pcc_param {
struct s390_xts_ctx {
u8 key[32];
- u8 xts_param[16];
- struct pcc_param pcc;
+ u8 pcc_key[32];
long enc;
long dec;
int key_len;
@@ -441,30 +439,36 @@ static int cbc_aes_set_key(struct crypto_tfm *tfm, const u8 *in_key,
return aes_set_key(tfm, in_key, key_len);
}
-static int cbc_aes_crypt(struct blkcipher_desc *desc, long func, void *param,
+static int cbc_aes_crypt(struct blkcipher_desc *desc, long func,
struct blkcipher_walk *walk)
{
+ struct s390_aes_ctx *sctx = crypto_blkcipher_ctx(desc->tfm);
int ret = blkcipher_walk_virt(desc, walk);
unsigned int nbytes = walk->nbytes;
+ struct {
+ u8 iv[AES_BLOCK_SIZE];
+ u8 key[AES_MAX_KEY_SIZE];
+ } param;
if (!nbytes)
goto out;
- memcpy(param, walk->iv, AES_BLOCK_SIZE);
+ memcpy(param.iv, walk->iv, AES_BLOCK_SIZE);
+ memcpy(param.key, sctx->key, sctx->key_len);
do {
/* only use complete blocks */
unsigned int n = nbytes & ~(AES_BLOCK_SIZE - 1);
u8 *out = walk->dst.virt.addr;
u8 *in = walk->src.virt.addr;
- ret = crypt_s390_kmc(func, param, out, in, n);
+ ret = crypt_s390_kmc(func, &param, out, in, n);
if (ret < 0 || ret != n)
return -EIO;
nbytes &= AES_BLOCK_SIZE - 1;
ret = blkcipher_walk_done(desc, walk, nbytes);
} while ((nbytes = walk->nbytes));
- memcpy(walk->iv, param, AES_BLOCK_SIZE);
+ memcpy(walk->iv, param.iv, AES_BLOCK_SIZE);
out:
return ret;
@@ -481,7 +485,7 @@ static int cbc_aes_encrypt(struct blkcipher_desc *desc,
return fallback_blk_enc(desc, dst, src, nbytes);
blkcipher_walk_init(&walk, dst, src, nbytes);
- return cbc_aes_crypt(desc, sctx->enc, sctx->iv, &walk);
+ return cbc_aes_crypt(desc, sctx->enc, &walk);
}
static int cbc_aes_decrypt(struct blkcipher_desc *desc,
@@ -495,7 +499,7 @@ static int cbc_aes_decrypt(struct blkcipher_desc *desc,
return fallback_blk_dec(desc, dst, src, nbytes);
blkcipher_walk_init(&walk, dst, src, nbytes);
- return cbc_aes_crypt(desc, sctx->dec, sctx->iv, &walk);
+ return cbc_aes_crypt(desc, sctx->dec, &walk);
}
static struct crypto_alg cbc_aes_alg = {
@@ -586,7 +590,7 @@ static int xts_aes_set_key(struct crypto_tfm *tfm, const u8 *in_key,
xts_ctx->enc = KM_XTS_128_ENCRYPT;
xts_ctx->dec = KM_XTS_128_DECRYPT;
memcpy(xts_ctx->key + 16, in_key, 16);
- memcpy(xts_ctx->pcc.key + 16, in_key + 16, 16);
+ memcpy(xts_ctx->pcc_key + 16, in_key + 16, 16);
break;
case 48:
xts_ctx->enc = 0;
@@ -597,7 +601,7 @@ static int xts_aes_set_key(struct crypto_tfm *tfm, const u8 *in_key,
xts_ctx->enc = KM_XTS_256_ENCRYPT;
xts_ctx->dec = KM_XTS_256_DECRYPT;
memcpy(xts_ctx->key, in_key, 32);
- memcpy(xts_ctx->pcc.key, in_key + 32, 32);
+ memcpy(xts_ctx->pcc_key, in_key + 32, 32);
break;
default:
*flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
@@ -616,29 +620,33 @@ static int xts_aes_crypt(struct blkcipher_desc *desc, long func,
unsigned int nbytes = walk->nbytes;
unsigned int n;
u8 *in, *out;
- void *param;
+ struct pcc_param pcc_param;
+ struct {
+ u8 key[32];
+ u8 init[16];
+ } xts_param;
if (!nbytes)
goto out;
- memset(xts_ctx->pcc.block, 0, sizeof(xts_ctx->pcc.block));
- memset(xts_ctx->pcc.bit, 0, sizeof(xts_ctx->pcc.bit));
- memset(xts_ctx->pcc.xts, 0, sizeof(xts_ctx->pcc.xts));
- memcpy(xts_ctx->pcc.tweak, walk->iv, sizeof(xts_ctx->pcc.tweak));
- param = xts_ctx->pcc.key + offset;
- ret = crypt_s390_pcc(func, param);
+ memset(pcc_param.block, 0, sizeof(pcc_param.block));
+ memset(pcc_param.bit, 0, sizeof(pcc_param.bit));
+ memset(pcc_param.xts, 0, sizeof(pcc_param.xts));
+ memcpy(pcc_param.tweak, walk->iv, sizeof(pcc_param.tweak));
+ memcpy(pcc_param.key, xts_ctx->pcc_key, 32);
+ ret = crypt_s390_pcc(func, &pcc_param.key[offset]);
if (ret < 0)
return -EIO;
- memcpy(xts_ctx->xts_param, xts_ctx->pcc.xts, 16);
- param = xts_ctx->key + offset;
+ memcpy(xts_param.key, xts_ctx->key, 32);
+ memcpy(xts_param.init, pcc_param.xts, 16);
do {
/* only use complete blocks */
n = nbytes & ~(AES_BLOCK_SIZE - 1);
out = walk->dst.virt.addr;
in = walk->src.virt.addr;
- ret = crypt_s390_km(func, param, out, in, n);
+ ret = crypt_s390_km(func, &xts_param.key[offset], out, in, n);
if (ret < 0 || ret != n)
return -EIO;
diff --git a/arch/s390/include/asm/page.h b/arch/s390/include/asm/page.h
index 316c8503a3b4..114258eeaacd 100644
--- a/arch/s390/include/asm/page.h
+++ b/arch/s390/include/asm/page.h
@@ -48,33 +48,21 @@ static inline void clear_page(void *page)
: "memory", "cc");
}
+/*
+ * copy_page uses the mvcl instruction with 0xb0 padding byte in order to
+ * bypass caches when copying a page. Especially when copying huge pages
+ * this keeps L1 and L2 data caches alive.
+ */
static inline void copy_page(void *to, void *from)
{
- if (MACHINE_HAS_MVPG) {
- register unsigned long reg0 asm ("0") = 0;
- asm volatile(
- " mvpg %0,%1"
- : : "a" (to), "a" (from), "d" (reg0)
- : "memory", "cc");
- } else
- asm volatile(
- " mvc 0(256,%0),0(%1)\n"
- " mvc 256(256,%0),256(%1)\n"
- " mvc 512(256,%0),512(%1)\n"
- " mvc 768(256,%0),768(%1)\n"
- " mvc 1024(256,%0),1024(%1)\n"
- " mvc 1280(256,%0),1280(%1)\n"
- " mvc 1536(256,%0),1536(%1)\n"
- " mvc 1792(256,%0),1792(%1)\n"
- " mvc 2048(256,%0),2048(%1)\n"
- " mvc 2304(256,%0),2304(%1)\n"
- " mvc 2560(256,%0),2560(%1)\n"
- " mvc 2816(256,%0),2816(%1)\n"
- " mvc 3072(256,%0),3072(%1)\n"
- " mvc 3328(256,%0),3328(%1)\n"
- " mvc 3584(256,%0),3584(%1)\n"
- " mvc 3840(256,%0),3840(%1)\n"
- : : "a" (to), "a" (from) : "memory");
+ register void *reg2 asm ("2") = to;
+ register unsigned long reg3 asm ("3") = 0x1000;
+ register void *reg4 asm ("4") = from;
+ register unsigned long reg5 asm ("5") = 0xb0001000;
+ asm volatile(
+ " mvcl 2,4"
+ : "+d" (reg2), "+d" (reg3), "+d" (reg4), "+d" (reg5)
+ : : "memory", "cc");
}
#define clear_user_page(page, vaddr, pg) clear_page(page)
diff --git a/arch/s390/include/asm/sclp.h b/arch/s390/include/asm/sclp.h
index 30ef748bc161..2f390956c7c1 100644
--- a/arch/s390/include/asm/sclp.h
+++ b/arch/s390/include/asm/sclp.h
@@ -8,6 +8,7 @@
#include <linux/types.h>
#include <asm/chpid.h>
+#include <asm/cpu.h>
#define SCLP_CHP_INFO_MASK_SIZE 32
@@ -37,7 +38,7 @@ struct sclp_cpu_info {
unsigned int standby;
unsigned int combined;
int has_cpu_type;
- struct sclp_cpu_entry cpu[255];
+ struct sclp_cpu_entry cpu[MAX_CPU_ADDRESS + 1];
};
int sclp_get_cpu_info(struct sclp_cpu_info *info);
diff --git a/arch/s390/include/asm/vdso.h b/arch/s390/include/asm/vdso.h
index a73eb2e1e918..bc9746a7d47c 100644
--- a/arch/s390/include/asm/vdso.h
+++ b/arch/s390/include/asm/vdso.h
@@ -26,8 +26,9 @@ struct vdso_data {
__u64 wtom_clock_nsec; /* 0x28 */
__u32 tz_minuteswest; /* Minutes west of Greenwich 0x30 */
__u32 tz_dsttime; /* Type of dst correction 0x34 */
- __u32 ectg_available;
- __u32 ntp_mult; /* NTP adjusted multiplier 0x3C */
+ __u32 ectg_available; /* ECTG instruction present 0x38 */
+ __u32 tk_mult; /* Mult. used for xtime_nsec 0x3c */
+ __u32 tk_shift; /* Shift used for xtime_nsec 0x40 */
};
struct vdso_per_cpu_data {
diff --git a/arch/s390/kernel/asm-offsets.c b/arch/s390/kernel/asm-offsets.c
index 2416138ebd3e..e4c99a183651 100644
--- a/arch/s390/kernel/asm-offsets.c
+++ b/arch/s390/kernel/asm-offsets.c
@@ -65,12 +65,14 @@ int main(void)
DEFINE(__VDSO_WTOM_NSEC, offsetof(struct vdso_data, wtom_clock_nsec));
DEFINE(__VDSO_TIMEZONE, offsetof(struct vdso_data, tz_minuteswest));
DEFINE(__VDSO_ECTG_OK, offsetof(struct vdso_data, ectg_available));
- DEFINE(__VDSO_NTP_MULT, offsetof(struct vdso_data, ntp_mult));
+ DEFINE(__VDSO_TK_MULT, offsetof(struct vdso_data, tk_mult));
+ DEFINE(__VDSO_TK_SHIFT, offsetof(struct vdso_data, tk_shift));
DEFINE(__VDSO_ECTG_BASE, offsetof(struct vdso_per_cpu_data, ectg_timer_base));
DEFINE(__VDSO_ECTG_USER, offsetof(struct vdso_per_cpu_data, ectg_user_time));
/* constants used by the vdso */
DEFINE(__CLOCK_REALTIME, CLOCK_REALTIME);
DEFINE(__CLOCK_MONOTONIC, CLOCK_MONOTONIC);
+ DEFINE(__CLOCK_THREAD_CPUTIME_ID, CLOCK_THREAD_CPUTIME_ID);
DEFINE(__CLOCK_REALTIME_RES, MONOTONIC_RES_NSEC);
BLANK();
/* idle data offsets */
diff --git a/arch/s390/kernel/compat_signal.c b/arch/s390/kernel/compat_signal.c
index 6e2442978409..95e7ba0fbb7e 100644
--- a/arch/s390/kernel/compat_signal.c
+++ b/arch/s390/kernel/compat_signal.c
@@ -194,7 +194,7 @@ static int restore_sigregs32(struct pt_regs *regs,_sigregs32 __user *sregs)
return -EINVAL;
/* Use regs->psw.mask instead of PSW_USER_BITS to preserve PER bit. */
- regs->psw.mask = (regs->psw.mask & ~PSW_MASK_USER) |
+ regs->psw.mask = (regs->psw.mask & ~(PSW_MASK_USER | PSW_MASK_RI)) |
(__u64)(user_sregs.regs.psw.mask & PSW32_MASK_USER) << 32 |
(__u64)(user_sregs.regs.psw.mask & PSW32_MASK_RI) << 32 |
(__u64)(user_sregs.regs.psw.addr & PSW32_ADDR_AMODE);
diff --git a/arch/s390/kernel/pgm_check.S b/arch/s390/kernel/pgm_check.S
index 4a460c44e17e..813ec7260878 100644
--- a/arch/s390/kernel/pgm_check.S
+++ b/arch/s390/kernel/pgm_check.S
@@ -78,7 +78,7 @@ PGM_CHECK_DEFAULT /* 34 */
PGM_CHECK_DEFAULT /* 35 */
PGM_CHECK_DEFAULT /* 36 */
PGM_CHECK_DEFAULT /* 37 */
-PGM_CHECK_DEFAULT /* 38 */
+PGM_CHECK_64BIT(do_dat_exception) /* 38 */
PGM_CHECK_64BIT(do_dat_exception) /* 39 */
PGM_CHECK_64BIT(do_dat_exception) /* 3a */
PGM_CHECK_64BIT(do_dat_exception) /* 3b */
diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c
index fb535874a246..d8fd508ccd1e 100644
--- a/arch/s390/kernel/signal.c
+++ b/arch/s390/kernel/signal.c
@@ -94,7 +94,7 @@ static int restore_sigregs(struct pt_regs *regs, _sigregs __user *sregs)
return -EINVAL;
/* Use regs->psw.mask instead of PSW_USER_BITS to preserve PER bit. */
- regs->psw.mask = (regs->psw.mask & ~PSW_MASK_USER) |
+ regs->psw.mask = (regs->psw.mask & ~(PSW_MASK_USER | PSW_MASK_RI)) |
(user_sregs.regs.psw.mask & (PSW_MASK_USER | PSW_MASK_RI));
/* Check for invalid user address space control. */
if ((regs->psw.mask & PSW_MASK_ASC) == PSW_ASC_HOME)
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index 064c3082ab33..dd95f1631621 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -108,20 +108,10 @@ static void fixup_clock_comparator(unsigned long long delta)
set_clock_comparator(S390_lowcore.clock_comparator);
}
-static int s390_next_ktime(ktime_t expires,
+static int s390_next_event(unsigned long delta,
struct clock_event_device *evt)
{
- struct timespec ts;
- u64 nsecs;
-
- ts.tv_sec = ts.tv_nsec = 0;
- monotonic_to_bootbased(&ts);
- nsecs = ktime_to_ns(ktime_add(timespec_to_ktime(ts), expires));
- do_div(nsecs, 125);
- S390_lowcore.clock_comparator = sched_clock_base_cc + (nsecs << 9);
- /* Program the maximum value if we have an overflow (== year 2042) */
- if (unlikely(S390_lowcore.clock_comparator < sched_clock_base_cc))
- S390_lowcore.clock_comparator = -1ULL;
+ S390_lowcore.clock_comparator = get_tod_clock() + delta;
set_clock_comparator(S390_lowcore.clock_comparator);
return 0;
}
@@ -146,15 +136,14 @@ void init_cpu_timer(void)
cpu = smp_processor_id();
cd = &per_cpu(comparators, cpu);
cd->name = "comparator";
- cd->features = CLOCK_EVT_FEAT_ONESHOT |
- CLOCK_EVT_FEAT_KTIME;
+ cd->features = CLOCK_EVT_FEAT_ONESHOT;
cd->mult = 16777;
cd->shift = 12;
cd->min_delta_ns = 1;
cd->max_delta_ns = LONG_MAX;
cd->rating = 400;
cd->cpumask = cpumask_of(cpu);
- cd->set_next_ktime = s390_next_ktime;
+ cd->set_next_event = s390_next_event;
cd->set_mode = s390_set_mode;
clockevents_register_device(cd);
@@ -221,21 +210,30 @@ struct clocksource * __init clocksource_default_clock(void)
return &clocksource_tod;
}
-void update_vsyscall_old(struct timespec *wall_time, struct timespec *wtm,
- struct clocksource *clock, u32 mult)
+void update_vsyscall(struct timekeeper *tk)
{
- if (clock != &clocksource_tod)
+ u64 nsecps;
+
+ if (tk->clock != &clocksource_tod)
return;
/* Make userspace gettimeofday spin until we're done. */
++vdso_data->tb_update_count;
smp_wmb();
- vdso_data->xtime_tod_stamp = clock->cycle_last;
- vdso_data->xtime_clock_sec = wall_time->tv_sec;
- vdso_data->xtime_clock_nsec = wall_time->tv_nsec;
- vdso_data->wtom_clock_sec = wtm->tv_sec;
- vdso_data->wtom_clock_nsec = wtm->tv_nsec;
- vdso_data->ntp_mult = mult;
+ vdso_data->xtime_tod_stamp = tk->clock->cycle_last;
+ vdso_data->xtime_clock_sec = tk->xtime_sec;
+ vdso_data->xtime_clock_nsec = tk->xtime_nsec;
+ vdso_data->wtom_clock_sec =
+ tk->xtime_sec + tk->wall_to_monotonic.tv_sec;
+ vdso_data->wtom_clock_nsec = tk->xtime_nsec +
+ + (tk->wall_to_monotonic.tv_nsec << tk->shift);
+ nsecps = (u64) NSEC_PER_SEC << tk->shift;
+ while (vdso_data->wtom_clock_nsec >= nsecps) {
+ vdso_data->wtom_clock_nsec -= nsecps;
+ vdso_data->wtom_clock_sec++;
+ }
+ vdso_data->tk_mult = tk->mult;
+ vdso_data->tk_shift = tk->shift;
smp_wmb();
++vdso_data->tb_update_count;
}
diff --git a/arch/s390/kernel/vdso.c b/arch/s390/kernel/vdso.c
index a84476f2a9bb..613649096783 100644
--- a/arch/s390/kernel/vdso.c
+++ b/arch/s390/kernel/vdso.c
@@ -125,7 +125,7 @@ int vdso_alloc_per_cpu(struct _lowcore *lowcore)
psal[i] = 0x80000000;
lowcore->paste[4] = (u32)(addr_t) psal;
- psal[0] = 0x20000000;
+ psal[0] = 0x02000000;
psal[2] = (u32)(addr_t) aste;
*(unsigned long *) (aste + 2) = segment_table +
_ASCE_TABLE_LENGTH + _ASCE_USER_BITS + _ASCE_TYPE_SEGMENT;
diff --git a/arch/s390/kernel/vdso32/clock_gettime.S b/arch/s390/kernel/vdso32/clock_gettime.S
index b2224e0b974c..65fc3979c2f1 100644
--- a/arch/s390/kernel/vdso32/clock_gettime.S
+++ b/arch/s390/kernel/vdso32/clock_gettime.S
@@ -38,25 +38,21 @@ __kernel_clock_gettime:
sl %r1,__VDSO_XTIME_STAMP+4(%r5)
brc 3,2f
ahi %r0,-1
-2: ms %r0,__VDSO_NTP_MULT(%r5) /* cyc2ns(clock,cycle_delta) */
+2: ms %r0,__VDSO_TK_MULT(%r5) /* * tk->mult */
lr %r2,%r0
- l %r0,__VDSO_NTP_MULT(%r5)
+ l %r0,__VDSO_TK_MULT(%r5)
ltr %r1,%r1
mr %r0,%r0
jnm 3f
- a %r0,__VDSO_NTP_MULT(%r5)
+ a %r0,__VDSO_TK_MULT(%r5)
3: alr %r0,%r2
- srdl %r0,12
- al %r0,__VDSO_XTIME_NSEC(%r5) /* + xtime */
- al %r1,__VDSO_XTIME_NSEC+4(%r5)
- brc 12,4f
- ahi %r0,1
-4: l %r2,__VDSO_XTIME_SEC+4(%r5)
- al %r0,__VDSO_WTOM_NSEC(%r5) /* + wall_to_monotonic */
+ al %r0,__VDSO_WTOM_NSEC(%r5)
al %r1,__VDSO_WTOM_NSEC+4(%r5)
brc 12,5f
ahi %r0,1
-5: al %r2,__VDSO_WTOM_SEC+4(%r5)
+5: l %r2,__VDSO_TK_SHIFT(%r5) /* Timekeeper shift */
+ srdl %r0,0(%r2) /* >> tk->shift */
+ l %r2,__VDSO_WTOM_SEC+4(%r5)
cl %r4,__VDSO_UPD_COUNT+4(%r5) /* check update counter */
jne 1b
basr %r5,0
@@ -86,20 +82,21 @@ __kernel_clock_gettime:
sl %r1,__VDSO_XTIME_STAMP+4(%r5)
brc 3,12f
ahi %r0,-1
-12: ms %r0,__VDSO_NTP_MULT(%r5) /* cyc2ns(clock,cycle_delta) */
+12: ms %r0,__VDSO_TK_MULT(%r5) /* * tk->mult */
lr %r2,%r0
- l %r0,__VDSO_NTP_MULT(%r5)
+ l %r0,__VDSO_TK_MULT(%r5)
ltr %r1,%r1
mr %r0,%r0
jnm 13f
- a %r0,__VDSO_NTP_MULT(%r5)
+ a %r0,__VDSO_TK_MULT(%r5)
13: alr %r0,%r2
- srdl %r0,12
- al %r0,__VDSO_XTIME_NSEC(%r5) /* + xtime */
+ al %r0,__VDSO_XTIME_NSEC(%r5) /* + tk->xtime_nsec */
al %r1,__VDSO_XTIME_NSEC+4(%r5)
brc 12,14f
ahi %r0,1
-14: l %r2,__VDSO_XTIME_SEC+4(%r5)
+14: l %r2,__VDSO_TK_SHIFT(%r5) /* Timekeeper shift */
+ srdl %r0,0(%r2) /* >> tk->shift */
+ l %r2,__VDSO_XTIME_SEC+4(%r5)
cl %r4,__VDSO_UPD_COUNT+4(%r5) /* check update counter */
jne 11b
basr %r5,0
diff --git a/arch/s390/kernel/vdso32/gettimeofday.S b/arch/s390/kernel/vdso32/gettimeofday.S
index 2d3633175e3b..fd621a950f7c 100644
--- a/arch/s390/kernel/vdso32/gettimeofday.S
+++ b/arch/s390/kernel/vdso32/gettimeofday.S
@@ -35,15 +35,14 @@ __kernel_gettimeofday:
sl %r1,__VDSO_XTIME_STAMP+4(%r5)
brc 3,3f
ahi %r0,-1
-3: ms %r0,__VDSO_NTP_MULT(%r5) /* cyc2ns(clock,cycle_delta) */
+3: ms %r0,__VDSO_TK_MULT(%r5) /* * tk->mult */
st %r0,24(%r15)
- l %r0,__VDSO_NTP_MULT(%r5)
+ l %r0,__VDSO_TK_MULT(%r5)
ltr %r1,%r1
mr %r0,%r0
jnm 4f
- a %r0,__VDSO_NTP_MULT(%r5)
+ a %r0,__VDSO_TK_MULT(%r5)
4: al %r0,24(%r15)
- srdl %r0,12
al %r0,__VDSO_XTIME_NSEC(%r5) /* + xtime */
al %r1,__VDSO_XTIME_NSEC+4(%r5)
brc 12,5f
@@ -51,6 +50,8 @@ __kernel_gettimeofday:
5: mvc 24(4,%r15),__VDSO_XTIME_SEC+4(%r5)
cl %r4,__VDSO_UPD_COUNT+4(%r5) /* check update counter */
jne 1b
+ l %r4,__VDSO_TK_SHIFT(%r5) /* Timekeeper shift */
+ srdl %r0,0(%r4) /* >> tk->shift */
l %r4,24(%r15) /* get tv_sec from stack */
basr %r5,0
6: ltr %r0,%r0
diff --git a/arch/s390/kernel/vdso64/clock_getres.S b/arch/s390/kernel/vdso64/clock_getres.S
index 176e1f75f9aa..34deba7c7ed1 100644
--- a/arch/s390/kernel/vdso64/clock_getres.S
+++ b/arch/s390/kernel/vdso64/clock_getres.S
@@ -23,7 +23,9 @@ __kernel_clock_getres:
je 0f
cghi %r2,__CLOCK_MONOTONIC
je 0f
- cghi %r2,-2 /* CLOCK_THREAD_CPUTIME_ID for this thread */
+ cghi %r2,__CLOCK_THREAD_CPUTIME_ID
+ je 0f
+ cghi %r2,-2 /* Per-thread CPUCLOCK with PID=0, VIRT=1 */
jne 2f
larl %r5,_vdso_data
icm %r0,15,__LC_ECTG_OK(%r5)
diff --git a/arch/s390/kernel/vdso64/clock_gettime.S b/arch/s390/kernel/vdso64/clock_gettime.S
index d46c95ed5f19..91940ed33a4a 100644
--- a/arch/s390/kernel/vdso64/clock_gettime.S
+++ b/arch/s390/kernel/vdso64/clock_gettime.S
@@ -22,7 +22,9 @@ __kernel_clock_gettime:
larl %r5,_vdso_data
cghi %r2,__CLOCK_REALTIME
je 4f
- cghi %r2,-2 /* CLOCK_THREAD_CPUTIME_ID for this thread */
+ cghi %r2,__CLOCK_THREAD_CPUTIME_ID
+ je 9f
+ cghi %r2,-2 /* Per-thread CPUCLOCK with PID=0, VIRT=1 */
je 9f
cghi %r2,__CLOCK_MONOTONIC
jne 12f
@@ -34,14 +36,13 @@ __kernel_clock_gettime:
tmll %r4,0x0001 /* pending update ? loop */
jnz 0b
stck 48(%r15) /* Store TOD clock */
+ lgf %r2,__VDSO_TK_SHIFT(%r5) /* Timekeeper shift */
+ lg %r0,__VDSO_WTOM_SEC(%r5)
lg %r1,48(%r15)
sg %r1,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */
- msgf %r1,__VDSO_NTP_MULT(%r5) /* * NTP adjustment */
- srlg %r1,%r1,12 /* cyc2ns(clock,cycle_delta) */
- alg %r1,__VDSO_XTIME_NSEC(%r5) /* + xtime */
- lg %r0,__VDSO_XTIME_SEC(%r5)
- alg %r1,__VDSO_WTOM_NSEC(%r5) /* + wall_to_monotonic */
- alg %r0,__VDSO_WTOM_SEC(%r5)
+ msgf %r1,__VDSO_TK_MULT(%r5) /* * tk->mult */
+ alg %r1,__VDSO_WTOM_NSEC(%r5)
+ srlg %r1,%r1,0(%r2) /* >> tk->shift */
clg %r4,__VDSO_UPD_COUNT(%r5) /* check update counter */
jne 0b
larl %r5,13f
@@ -62,12 +63,13 @@ __kernel_clock_gettime:
tmll %r4,0x0001 /* pending update ? loop */
jnz 5b
stck 48(%r15) /* Store TOD clock */
+ lgf %r2,__VDSO_TK_SHIFT(%r5) /* Timekeeper shift */
lg %r1,48(%r15)
sg %r1,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */
- msgf %r1,__VDSO_NTP_MULT(%r5) /* * NTP adjustment */
- srlg %r1,%r1,12 /* cyc2ns(clock,cycle_delta) */
- alg %r1,__VDSO_XTIME_NSEC(%r5) /* + xtime */
- lg %r0,__VDSO_XTIME_SEC(%r5)
+ msgf %r1,__VDSO_TK_MULT(%r5) /* * tk->mult */
+ alg %r1,__VDSO_XTIME_NSEC(%r5) /* + tk->xtime_nsec */
+ srlg %r1,%r1,0(%r2) /* >> tk->shift */
+ lg %r0,__VDSO_XTIME_SEC(%r5) /* tk->xtime_sec */
clg %r4,__VDSO_UPD_COUNT(%r5) /* check update counter */
jne 5b
larl %r5,13f
diff --git a/arch/s390/kernel/vdso64/gettimeofday.S b/arch/s390/kernel/vdso64/gettimeofday.S
index 36ee674722ec..d0860d1d0ccc 100644
--- a/arch/s390/kernel/vdso64/gettimeofday.S
+++ b/arch/s390/kernel/vdso64/gettimeofday.S
@@ -31,12 +31,13 @@ __kernel_gettimeofday:
stck 48(%r15) /* Store TOD clock */
lg %r1,48(%r15)
sg %r1,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */
- msgf %r1,__VDSO_NTP_MULT(%r5) /* * NTP adjustment */
- srlg %r1,%r1,12 /* cyc2ns(clock,cycle_delta) */
- alg %r1,__VDSO_XTIME_NSEC(%r5) /* + xtime.tv_nsec */
- lg %r0,__VDSO_XTIME_SEC(%r5) /* xtime.tv_sec */
+ msgf %r1,__VDSO_TK_MULT(%r5) /* * tk->mult */
+ alg %r1,__VDSO_XTIME_NSEC(%r5) /* + tk->xtime_nsec */
+ lg %r0,__VDSO_XTIME_SEC(%r5) /* tk->xtime_sec */
clg %r4,__VDSO_UPD_COUNT(%r5) /* check update counter */
jne 0b
+ lgf %r5,__VDSO_TK_SHIFT(%r5) /* Timekeeper shift */
+ srlg %r1,%r1,0(%r5) /* >> tk->shift */
larl %r5,5f
2: clg %r1,0(%r5)
jl 3f
diff --git a/arch/s390/lib/uaccess_pt.c b/arch/s390/lib/uaccess_pt.c
index 97e03caf7825..dbdab3e7a1a6 100644
--- a/arch/s390/lib/uaccess_pt.c
+++ b/arch/s390/lib/uaccess_pt.c
@@ -78,11 +78,14 @@ static size_t copy_in_kernel(size_t count, void __user *to,
* contains the (negative) exception code.
*/
#ifdef CONFIG_64BIT
+
static unsigned long follow_table(struct mm_struct *mm,
unsigned long address, int write)
{
unsigned long *table = (unsigned long *)__pa(mm->pgd);
+ if (unlikely(address > mm->context.asce_limit - 1))
+ return -0x38UL;
switch (mm->context.asce_bits & _ASCE_TYPE_MASK) {
case _ASCE_TYPE_REGION1:
table = table + ((address >> 53) & 0x7ff);
diff --git a/arch/um/Makefile b/arch/um/Makefile
index 48d92bbe62e9..36e658a4291c 100644
--- a/arch/um/Makefile
+++ b/arch/um/Makefile
@@ -33,12 +33,11 @@ MODE_INCLUDE += -I$(srctree)/$(ARCH_DIR)/include/shared/skas
HEADER_ARCH := $(SUBARCH)
-# Additional ARCH settings for x86
-ifeq ($(SUBARCH),i386)
- HEADER_ARCH := x86
+ifneq ($(filter $(SUBARCH),x86 x86_64 i386),)
+ HEADER_ARCH := x86
endif
-ifeq ($(SUBARCH),x86_64)
- HEADER_ARCH := x86
+
+ifdef CONFIG_64BIT
KBUILD_CFLAGS += -mcmodel=large
endif
diff --git a/arch/um/kernel/sysrq.c b/arch/um/kernel/sysrq.c
index 4d6fdf68edf3..799d7e413bf5 100644
--- a/arch/um/kernel/sysrq.c
+++ b/arch/um/kernel/sysrq.c
@@ -19,7 +19,7 @@ struct stack_frame {
unsigned long return_address;
};
-static void print_stack_trace(unsigned long *sp, unsigned long bp)
+static void do_stack_trace(unsigned long *sp, unsigned long bp)
{
int reliable;
unsigned long addr;
@@ -94,5 +94,5 @@ void show_stack(struct task_struct *task, unsigned long *stack)
}
printk(KERN_CONT "\n");
- print_stack_trace(sp, bp);
+ do_stack_trace(sp, bp);
}
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 41250fb33985..57d021507120 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -31,6 +31,9 @@ ifeq ($(CONFIG_X86_32),y)
KBUILD_CFLAGS += -msoft-float -mregparm=3 -freg-struct-return
+ # Don't autogenerate MMX or SSE instructions
+ KBUILD_CFLAGS += -mno-mmx -mno-sse
+
# Never want PIC in a 32-bit kernel, prevent breakage with GCC built
# with nonstandard options
KBUILD_CFLAGS += -fno-pic
@@ -57,8 +60,11 @@ else
KBUILD_AFLAGS += -m64
KBUILD_CFLAGS += -m64
+ # Don't autogenerate MMX or SSE instructions
+ KBUILD_CFLAGS += -mno-mmx -mno-sse
+
# Use -mpreferred-stack-boundary=3 if supported.
- KBUILD_CFLAGS += $(call cc-option,-mno-sse -mpreferred-stack-boundary=3)
+ KBUILD_CFLAGS += $(call cc-option,-mpreferred-stack-boundary=3)
# FIXME - should be integrated in Makefile.cpu (Makefile_32.cpu)
cflags-$(CONFIG_MK8) += $(call cc-option,-march=k8)
diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile
index dce69a256896..d9c11956fce0 100644
--- a/arch/x86/boot/Makefile
+++ b/arch/x86/boot/Makefile
@@ -53,18 +53,18 @@ $(obj)/cpustr.h: $(obj)/mkcpustr FORCE
# How to compile the 16-bit code. Note we always compile for -march=i386,
# that way we can complain to the user if the CPU is insufficient.
-KBUILD_CFLAGS := $(USERINCLUDE) -g -Os -D_SETUP -D__KERNEL__ \
+KBUILD_CFLAGS := $(USERINCLUDE) -m32 -g -Os -D_SETUP -D__KERNEL__ \
-DDISABLE_BRANCH_PROFILING \
-Wall -Wstrict-prototypes \
-march=i386 -mregparm=3 \
-include $(srctree)/$(src)/code16gcc.h \
-fno-strict-aliasing -fomit-frame-pointer -fno-pic \
+ -mno-mmx -mno-sse \
$(call cc-option, -ffreestanding) \
$(call cc-option, -fno-toplevel-reorder,\
- $(call cc-option, -fno-unit-at-a-time)) \
+ $(call cc-option, -fno-unit-at-a-time)) \
$(call cc-option, -fno-stack-protector) \
$(call cc-option, -mpreferred-stack-boundary=2)
-KBUILD_CFLAGS += $(call cc-option, -m32)
KBUILD_AFLAGS := $(KBUILD_CFLAGS) -D__ASSEMBLY__
GCOV_PROFILE := n
diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile
index dcd90df10ab4..c8a6792e7842 100644
--- a/arch/x86/boot/compressed/Makefile
+++ b/arch/x86/boot/compressed/Makefile
@@ -13,6 +13,7 @@ KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING
cflags-$(CONFIG_X86_32) := -march=i386
cflags-$(CONFIG_X86_64) := -mcmodel=small
KBUILD_CFLAGS += $(cflags-y)
+KBUILD_CFLAGS += -mno-mmx -mno-sse
KBUILD_CFLAGS += $(call cc-option,-ffreestanding)
KBUILD_CFLAGS += $(call cc-option,-fno-stack-protector)
diff --git a/arch/x86/crypto/Makefile b/arch/x86/crypto/Makefile
index 7d6ba9db1be9..e0fc24db234a 100644
--- a/arch/x86/crypto/Makefile
+++ b/arch/x86/crypto/Makefile
@@ -3,8 +3,9 @@
#
avx_supported := $(call as-instr,vpxor %xmm0$(comma)%xmm0$(comma)%xmm0,yes,no)
+avx2_supported := $(call as-instr,vpgatherdd %ymm0$(comma)(%eax$(comma)%ymm1\
+ $(comma)4)$(comma)%ymm2,yes,no)
-obj-$(CONFIG_CRYPTO_ABLK_HELPER_X86) += ablk_helper.o
obj-$(CONFIG_CRYPTO_GLUE_HELPER_X86) += glue_helper.o
obj-$(CONFIG_CRYPTO_AES_586) += aes-i586.o
diff --git a/arch/x86/crypto/aesni-intel_glue.c b/arch/x86/crypto/aesni-intel_glue.c
index f80e668785c0..835488b745ee 100644
--- a/arch/x86/crypto/aesni-intel_glue.c
+++ b/arch/x86/crypto/aesni-intel_glue.c
@@ -34,7 +34,7 @@
#include <asm/cpu_device_id.h>
#include <asm/i387.h>
#include <asm/crypto/aes.h>
-#include <asm/crypto/ablk_helper.h>
+#include <crypto/ablk_helper.h>
#include <crypto/scatterwalk.h>
#include <crypto/internal/aead.h>
#include <linux/workqueue.h>
diff --git a/arch/x86/crypto/camellia_aesni_avx2_glue.c b/arch/x86/crypto/camellia_aesni_avx2_glue.c
index 414fe5d7946b..4209a76fcdaa 100644
--- a/arch/x86/crypto/camellia_aesni_avx2_glue.c
+++ b/arch/x86/crypto/camellia_aesni_avx2_glue.c
@@ -14,6 +14,7 @@
#include <linux/types.h>
#include <linux/crypto.h>
#include <linux/err.h>
+#include <crypto/ablk_helper.h>
#include <crypto/algapi.h>
#include <crypto/ctr.h>
#include <crypto/lrw.h>
@@ -21,7 +22,6 @@
#include <asm/xcr.h>
#include <asm/xsave.h>
#include <asm/crypto/camellia.h>
-#include <asm/crypto/ablk_helper.h>
#include <asm/crypto/glue_helper.h>
#define CAMELLIA_AESNI_PARALLEL_BLOCKS 16
diff --git a/arch/x86/crypto/camellia_aesni_avx_glue.c b/arch/x86/crypto/camellia_aesni_avx_glue.c
index 37fd0c0a81ea..87a041a10f4a 100644
--- a/arch/x86/crypto/camellia_aesni_avx_glue.c
+++ b/arch/x86/crypto/camellia_aesni_avx_glue.c
@@ -14,6 +14,7 @@
#include <linux/types.h>
#include <linux/crypto.h>
#include <linux/err.h>
+#include <crypto/ablk_helper.h>
#include <crypto/algapi.h>
#include <crypto/ctr.h>
#include <crypto/lrw.h>
@@ -21,7 +22,6 @@
#include <asm/xcr.h>
#include <asm/xsave.h>
#include <asm/crypto/camellia.h>
-#include <asm/crypto/ablk_helper.h>
#include <asm/crypto/glue_helper.h>
#define CAMELLIA_AESNI_PARALLEL_BLOCKS 16
diff --git a/arch/x86/crypto/cast5_avx_glue.c b/arch/x86/crypto/cast5_avx_glue.c
index c6631813dc11..e6a3700489b9 100644
--- a/arch/x86/crypto/cast5_avx_glue.c
+++ b/arch/x86/crypto/cast5_avx_glue.c
@@ -26,13 +26,13 @@
#include <linux/types.h>
#include <linux/crypto.h>
#include <linux/err.h>
+#include <crypto/ablk_helper.h>
#include <crypto/algapi.h>
#include <crypto/cast5.h>
#include <crypto/cryptd.h>
#include <crypto/ctr.h>
#include <asm/xcr.h>
#include <asm/xsave.h>
-#include <asm/crypto/ablk_helper.h>
#include <asm/crypto/glue_helper.h>
#define CAST5_PARALLEL_BLOCKS 16
diff --git a/arch/x86/crypto/cast6_avx_glue.c b/arch/x86/crypto/cast6_avx_glue.c
index 8d0dfb86a559..09f3677393e4 100644
--- a/arch/x86/crypto/cast6_avx_glue.c
+++ b/arch/x86/crypto/cast6_avx_glue.c
@@ -28,6 +28,7 @@
#include <linux/types.h>
#include <linux/crypto.h>
#include <linux/err.h>
+#include <crypto/ablk_helper.h>
#include <crypto/algapi.h>
#include <crypto/cast6.h>
#include <crypto/cryptd.h>
@@ -37,7 +38,6 @@
#include <crypto/xts.h>
#include <asm/xcr.h>
#include <asm/xsave.h>
-#include <asm/crypto/ablk_helper.h>
#include <asm/crypto/glue_helper.h>
#define CAST6_PARALLEL_BLOCKS 8
diff --git a/arch/x86/crypto/serpent_avx2_glue.c b/arch/x86/crypto/serpent_avx2_glue.c
index 23aabc6c20a5..2fae489b1524 100644
--- a/arch/x86/crypto/serpent_avx2_glue.c
+++ b/arch/x86/crypto/serpent_avx2_glue.c
@@ -14,6 +14,7 @@
#include <linux/types.h>
#include <linux/crypto.h>
#include <linux/err.h>
+#include <crypto/ablk_helper.h>
#include <crypto/algapi.h>
#include <crypto/ctr.h>
#include <crypto/lrw.h>
@@ -22,7 +23,6 @@
#include <asm/xcr.h>
#include <asm/xsave.h>
#include <asm/crypto/serpent-avx.h>
-#include <asm/crypto/ablk_helper.h>
#include <asm/crypto/glue_helper.h>
#define SERPENT_AVX2_PARALLEL_BLOCKS 16
diff --git a/arch/x86/crypto/serpent_avx_glue.c b/arch/x86/crypto/serpent_avx_glue.c
index 9ae83cf8d21e..ff4870870972 100644
--- a/arch/x86/crypto/serpent_avx_glue.c
+++ b/arch/x86/crypto/serpent_avx_glue.c
@@ -28,6 +28,7 @@
#include <linux/types.h>
#include <linux/crypto.h>
#include <linux/err.h>
+#include <crypto/ablk_helper.h>
#include <crypto/algapi.h>
#include <crypto/serpent.h>
#include <crypto/cryptd.h>
@@ -38,7 +39,6 @@
#include <asm/xcr.h>
#include <asm/xsave.h>
#include <asm/crypto/serpent-avx.h>
-#include <asm/crypto/ablk_helper.h>
#include <asm/crypto/glue_helper.h>
/* 8-way parallel cipher functions */
diff --git a/arch/x86/crypto/serpent_sse2_glue.c b/arch/x86/crypto/serpent_sse2_glue.c
index 97a356ece24d..8c95f8637306 100644
--- a/arch/x86/crypto/serpent_sse2_glue.c
+++ b/arch/x86/crypto/serpent_sse2_glue.c
@@ -34,6 +34,7 @@
#include <linux/types.h>
#include <linux/crypto.h>
#include <linux/err.h>
+#include <crypto/ablk_helper.h>
#include <crypto/algapi.h>
#include <crypto/serpent.h>
#include <crypto/cryptd.h>
@@ -42,7 +43,6 @@
#include <crypto/lrw.h>
#include <crypto/xts.h>
#include <asm/crypto/serpent-sse2.h>
-#include <asm/crypto/ablk_helper.h>
#include <asm/crypto/glue_helper.h>
static void serpent_decrypt_cbc_xway(void *ctx, u128 *dst, const u128 *src)
diff --git a/arch/x86/crypto/sha256_ssse3_glue.c b/arch/x86/crypto/sha256_ssse3_glue.c
index 50226c4b86ed..f248546da1ca 100644
--- a/arch/x86/crypto/sha256_ssse3_glue.c
+++ b/arch/x86/crypto/sha256_ssse3_glue.c
@@ -281,7 +281,7 @@ static int __init sha256_ssse3_mod_init(void)
/* allow AVX to override SSSE3, it's a little faster */
if (avx_usable()) {
#ifdef CONFIG_AS_AVX2
- if (boot_cpu_has(X86_FEATURE_AVX2))
+ if (boot_cpu_has(X86_FEATURE_AVX2) && boot_cpu_has(X86_FEATURE_BMI2))
sha256_transform_asm = sha256_transform_rorx;
else
#endif
@@ -319,4 +319,4 @@ MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("SHA256 Secure Hash Algorithm, Supplemental SSE3 accelerated");
MODULE_ALIAS("sha256");
-MODULE_ALIAS("sha384");
+MODULE_ALIAS("sha224");
diff --git a/arch/x86/crypto/twofish_avx_glue.c b/arch/x86/crypto/twofish_avx_glue.c
index a62ba541884e..4e3c665be129 100644
--- a/