summaryrefslogtreecommitdiff
path: root/arch/arm64/boot
AgeCommit message (Collapse)AuthorFilesLines
2016-06-03arm64: dts: drop "arm,amba-bus" in favor of "simple-bus" part 2Masahiro Yamada2-2/+2
Tree-wide replacement was done by commit 2ef7d5f342c1 (ARM, ARM64: dts: drop "arm,amba-bus" in favor of "simple-bus"), but we have some new users of "arm,amba-bus" at Linux 4.7-rc1. Eliminate them now. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Chanho Min <chanho.min@lge.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-05-24Merge tag 'armsoc-late' of ↵Linus Torvalds1-55/+68
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late DT updates from Arnd Bergmann: "This is a collection of a few late fixes and other misc stuff that had dependencies on things being merged from other trees. The Renesas R-Car power domain handling, and the Nvidia Tegra USB support both hand notable changes that required changing the DT binding in a way that only provides compatibility with old DT blobs on new kernels but not vice versa. As a consequence, the DT changes are based on top of the driver changes and are now in this branch. For NXP i.MX and Samsung Exynos, the changes in here depend on other changes that got merged through the clk maintainer tree" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (35 commits) ARM: dts: exynos: Add support of Bus frequency using VDD_INT for exynos5422-odroidxu3 ARM: dts: exynos: Add bus nodes using VDD_INT for Exynos542x SoC ARM: dts: exynos: Add NoC Probe dt node for Exynos542x SoC ARM: dts: exynos: Add support of bus frequency for exynos4412-trats/odroidu3 ARM: dts: exynos: Expand the voltage range of buck1/3 regulator for exynos4412-odroidu3 ARM: dts: exynos: Add support of bus frequency using VDD_INT for exynos3250-rinato ARM: dts: exynos: Add exynos4412-ppmu-common dtsi to delete duplicate PPMU nodes ARM: dts: exynos: Add bus nodes using VDD_MIF for Exynos4210 ARM: dts: exynos: Add bus nodes using VDD_INT for Exynos4x12 ARM: dts: exynos: Add bus nodes using VDD_MIF for Exynos4x12 ARM: dts: exynos: Add bus nodes using VDD_INT for Exynos3250 ARM: dts: exynos: Add DMC bus frequency for exynos3250-rinato/monk ARM: dts: exynos: Add DMC bus node for Exynos3250 ARM: tegra: Enable XUSB on Nyan ARM: tegra: Enable XUSB on Jetson TK1 ARM: tegra: Enable XUSB on Venice2 ARM: tegra: Add Tegra124 XUSB controller ARM: tegra: Move Tegra124 to the new XUSB pad controller binding ARM: dts: r8a7794: Use SYSC "always-on" PM Domain ARM: dts: r8a7793: Use SYSC "always-on" PM Domain ...
2016-05-18Merge tag 'armsoc-dt64' of ↵Linus Torvalds71-470/+6865
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM 64-bit DT updates from Arnd Bergmann: "We continue ramping up platform support for 64-bit ARM machines, with 111 individual non-merge changesets touching 21 platforms. The LG1312 platform is completely new and is the first ARM platform by LG that we support in the mainline kernel. Two other SoCs got added that are updated versions of existing SoC families, so the port mainly consists of new dts files: - The Hisilicon Hip06/D03 is the latest server platform from Huawei/Hisilicon, and follows the Hip05/D02 platform. - Rockchip RK3399 follows the 32-bit RK3288 that is popular in low-end Chromebooks and the 64-bit RK3368 that is mainly found in chinese Android TV boxes. The 96Boards HiKey based on the Hisilicon Hi6220 (Kirin 620) gets a long-awaited overhaul with a lot of devices enabled in the DT, so it should be much more usable with a mainline kernel now. See also https://plus.google.com/111524780435806926688/posts/PeGb2VsNhJd A lot of work went into enabling new device drivers on existing machines, but we also have a couple of new commercially available machines: - Google Pixel C laptop based on Tegra210 - Hardkernel Odroid C2 Based on Amlogic Meson GXBB (S905) - Geekbuying GeekBox based on Rockchip RK3368 And finally, a couple of reference or development platforms that are not end-user platforms but are used for trying out the respective SoC platforms: - Amlogic Meson GXBB P200 and P201 development systems - NXP Layerscape 1043A QDS development board - Hisilicon Hip06 D03 server board, as mentioned above - LG1312 Reference Design - RK3399 Evaluation Board" * tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (104 commits) arm64: dts: marvell: add XOR node for Armada 3700 SoC dt-bindings: document rockchip rk3399-evb board arm64: dts: rockchip: add dts file for RK3399 evaluation board arm64: dts: rockchip: add core dtsi file for RK3399 SoCs dt-bindings: rockchip-dw-mshc: add description for rk3399 arm64: dts: marvell: Use a SoC-specific compatible for xHCI on Armada37xx arm64: dts: marvell: Rename armada-37xx USB node arm64: dts: marvell: Clean up armada-3720-db Documentation: arm64: Add Hisilicon Hip06 D03 dts binding arm64: dts: Add initial dts for Hisilicon Hip06 D03 board arm64: dts: hip05: Add nor flash support arm64: dts: hip05: fix its node without msi-cells arm64: dts: r8a7795: Don't disable referenced optional clocks arm64: dts: salvator-x: populate EXTALR arm64: dts: r8a7795: enable PCIe on Salvator-X arm64: dts: r8a7795: Add PCIe nodes arm64: tegra: Add IOMMU node to GM20B on Tegra210 arm64: tegra: Add reference clock to GM20B on Tegra210 dt-bindings: Add documentation for GM20B GPU dt-bindings: gk20a: Document iommus property ...
2016-05-18Merge tag 'armsoc-dt' of ↵Linus Torvalds1-2/+40
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Arnd Bergmann: "These are all the updates to device tree files for 32-bit platforms, which as usual makes up the bulk of the ARM SoC changes: 462 non-merge changesets, 450 files changed, 23340 insertions, 5216 deletions. The three platforms that are added with the "soc" branch are here as well, and we add some related machine files: - For Aspeed AST2400/AST2500, we get the evaluation platform and the Tyan Palmetto POWER8 mainboard that uses the AST2400 BMC - For Oxnas 810SE, the Western Digital "My Book World Edition" is added as the only platform at the moment. - For ARM MPS2, the AN385 (Cortex-M3) and AN399 (Cortex-M7) are supported On the ARM Realview development platform, we now support all machines with device tree, previously only the board files were supported, which in turn will likely be removed soon. Qualcomm IPQ4019 is the second generation ARM based "Internet Processor", following the IPQ806x that is used in many high-end WiFi routers. This one integrates two ath10k wifi radios that were previously on separate chips. Other boards that got added for existing chips are: Ti OMAP family: - Amazon Kindle Fire, first generation, tablet and ebook reader - OnRISC Baltos iR 2110 and 3220 embedded industrial PCs - TI AM5728 IDK, TI AM3359 ICE-V2, and TI DRA722 Rev C EVM development systems Samsung EXYNOS platform: - Samsung ARTIK5 evaluation board, see https://www.artik.io/modules/overview/artik-5/ NXP i.MX platforms: - Ka-Ro electronics TX6S-8034, TX6S-8035, TX6U-8033, TX6U-81xx, TX6Q-1036, TX6Q-1110/-1130, TXUL-0010 and TXUL-0011 industrial SoM modules - Embest MarS Board i.MX6Dual DIY platform - Boundary Devices i.MX6 Quad Plus Nitrogen6_MAX and SoloX Nitrogen6sx embedded boards - Technexion Pico i.MX6UL compute module - ZII VF610 Development Board Marvell embedded (mvebu, orion, kirkwood) platforms: - Linksys Viper (E4200v2 / EA4500) WiFi router - Buffalo Kurobox Pro NAS Qualcomm Snapdragon: - Arrow DragonBoard 600c (96boards) with APQ8064 Snapdragon 600 Rockchips platform: - mqmaker MiQi single-board computer Altera SoCFPGA: - samtec VIN|ING 1000 vehicle communication interface Allwinner Sunxi platforms: - Dserve DSRV9703C tablet - Difrnce DIT4350 tablet - Colorfly E708 Q1 tablet - Polaroid MID2809PXE04 tablet - Olimex A20 OLinuXino LIME2 single board computer - Xunlong Orange Pi 2, Orange Pi One, and Orange Pi PC single board computers Across many platforms, bug fixes went in to address warnings that dtc now emits with 'make dtbs W=1'. Further changes for device enablement went into Ti OMAP, bcm283x (Raspberry Pi), bcm47xx (wifi router), Ti Davinci, Samsung EXYNOS, Marvell mvebu/kirkwood/orion, NXP i.MX/Vybrid NXP LPC18xx, NXP LPC32xx, Renesas shmobile/r-mobile/r-car, Rockchips rk3xxx, ST Ux500, ST STi, Atmel AT91/SAMA5, Altera SoCFPGA, Allwinner Sunxi, Sigma Designs Tango, NVIDIA Tegra, Socionext Uniphier and ARM Versatile Express" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (458 commits) ARM: dts: tango4: Import watchdog node ARM: dts: tango4: Update cpus node for cpufreq ARM: dts: tango4: Update DT to match clk driver ARM: dts: tango4: Initial thermal support arm/dst: Add Aspeed ast2500 device tree arm/dts: Add Aspeed ast2400 device tree ARM: sun7i: dt: Add pll3 and pll7 clocks ARM: dts: sunxi: Add a olinuxino-lime2-emmc ARM: dts: at91: sama5d4: add trng node ARM: dts: at91: sama5d3: add trng node ARM: dts: at91: sama5d2: add trng node ARM: dts: at91: at91sam9g45 family: reduce the trng register map size ARM: sun4i: dt: Add pll3 and pll7 clocks ARM: sun5i: chip: Enable the TV Encoder ARM: sun5i: r8: Add display blocks to the DTSI ARM: sun5i: a13: Add display and TCON clocks ARM: dts: ux500: configure the accelerometers open drain ARM: mx5: dts: Enable USB OTG on M53EVK ARM: dts: imx6ul-14x14-evk: Add audio support ARM: dts: imx6qdl: Remove unneeded unit-addresses ...
2016-05-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds3-42/+34
Pull networking updates from David Miller: "Highlights: 1) Support SPI based w5100 devices, from Akinobu Mita. 2) Partial Segmentation Offload, from Alexander Duyck. 3) Add GMAC4 support to stmmac driver, from Alexandre TORGUE. 4) Allow cls_flower stats offload, from Amir Vadai. 5) Implement bpf blinding, from Daniel Borkmann. 6) Optimize _ASYNC_ bit twiddling on sockets, unless the socket is actually using FASYNC these atomics are superfluous. From Eric Dumazet. 7) Run TCP more preemptibly, also from Eric Dumazet. 8) Support LED blinking, EEPROM dumps, and rxvlan offloading in mlx5e driver, from Gal Pressman. 9) Allow creating ppp devices via rtnetlink, from Guillaume Nault. 10) Improve BPF usage documentation, from Jesper Dangaard Brouer. 11) Support tunneling offloads in qed, from Manish Chopra. 12) aRFS offloading in mlx5e, from Maor Gottlieb. 13) Add RFS and RPS support to SCTP protocol, from Marcelo Ricardo Leitner. 14) Add MSG_EOR support to TCP, this allows controlling packet coalescing on application record boundaries for more accurate socket timestamp sampling. From Martin KaFai Lau. 15) Fix alignment of 64-bit netlink attributes across the board, from Nicolas Dichtel. 16) Per-vlan stats in bridging, from Nikolay Aleksandrov. 17) Several conversions of drivers to ethtool ksettings, from Philippe Reynes. 18) Checksum neutral ILA in ipv6, from Tom Herbert. 19) Factorize all of the various marvell dsa drivers into one, from Vivien Didelot 20) Add VF support to qed driver, from Yuval Mintz" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1649 commits) Revert "phy dp83867: Fix compilation with CONFIG_OF_MDIO=m" Revert "phy dp83867: Make rgmii parameters optional" r8169: default to 64-bit DMA on recent PCIe chips phy dp83867: Make rgmii parameters optional phy dp83867: Fix compilation with CONFIG_OF_MDIO=m bpf: arm64: remove callee-save registers use for tmp registers asix: Fix offset calculation in asix_rx_fixup() causing slow transmissions switchdev: pass pointer to fib_info instead of copy net_sched: close another race condition in tcf_mirred_release() tipc: fix nametable publication field in nl compat drivers: net: Don't print unpopulated net_device name qed: add support for dcbx. ravb: Add missing free_irq() calls to ravb_close() qed: Remove a stray tab net: ethernet: fec-mpc52xx: use phy_ethtool_{get|set}_link_ksettings net: ethernet: fec-mpc52xx: use phydev from struct net_device bpf, doc: fix typo on bpf_asm descriptions stmmac: hardware TX COE doesn't work when force_thresh_dma_mode is set net: ethernet: fs-enet: use phy_ethtool_{get|set}_link_ksettings net: ethernet: fs-enet: use phydev from struct net_device ...
2016-05-16Merge tag 'arm64-perf' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 perf updates from Will Deacon: "The main addition here is support for Broadcom's Vulcan core using the architected ID registers for discovering supported events. - Support for the PMU in Broadcom's Vulcan CPU - Dynamic event detection using the PMCEIDn_EL0 ID registers" * tag 'arm64-perf' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: perf: don't expose CHAIN event in sysfs arm64/perf: Add Broadcom Vulcan PMU support arm64/perf: Filter common events based on PMCEIDn_EL0 arm64/perf: Access pmu register using <read/write>_sys_reg arm64/perf: Define complete ARMv8 recommended implementation defined events arm64/perf: Changed events naming as per the ARM ARM arm64: dts: Add Broadcom Vulcan PMU in dts Documentation: arm64: pmu: Add Broadcom Vulcan PMU binding
2016-05-10Merge tag 'imx-dt64-4.7' of ↵Arnd Bergmann6-12/+326
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt64 Merge "The Freescale/NXP arm64 device tree updates for 4.7" from Shawn Guo: - New board support of LS1043a-QDS from Freescale/NXP - Add new compatible for LS1043A and LS2080A GPIO devices - Update device tree bindings and sources for LS2080A fsl-mc device - Update QSPI and DSPI support on LS1043A and LS2080A * tag 'imx-dt64-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: ls2080a: fsl-mc dt node updates Documentation: fsl-mc: binding updates for MSIs, ranges, PHYs arm64: dts: ls1043a: add the DTS node for QSPI support Documentation: fsl-quadspi: Add fsl,ls1043a-qspi compatible string arm64: dts: ls2080a: Add compatible "fsl,ls2080a-gpio" for ls2080a gpio nodes arm64: dts: ls1043a: Add compatible "fsl,qoriq-gpio" for ls1043a gpio nodes arm64: dts: ls2080a: update the DTS for QSPI and DSPI support Documentation: fsl: dspi: Add fsl,ls2080a-dspi compatible string arm64: dts: ls1043a-rdb: add the DTS for DSPI support arm64: dts: add LS1043a-QDS board support Documentation: DT: Add entry for Freescale LS1043a-QDS board
2016-05-10Merge tag 'v4.6-next-dts64' of https://github.com/mbgg/linux-mediatek into ↵Arnd Bergmann1-0/+60
next/dt64 Merge "ARM: mediatek: dts64 updates for v4.7" from Matthias Brugger: - add thermal and auxadc device nodes to mt8173 - add thermal zone nodes to mt8173 * tag 'v4.6-next-dts64' of https://github.com/mbgg/linux-mediatek: arm64: dts: mt8173: Add thermal zone node. ARM64: dts: mt8173: Add thermal/auxadc device nodes
2016-05-10Merge tag 'tegra-for-4.7-gm20b' of ↵Arnd Bergmann1-2/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt64 Merge "arm64: tegra: Enable GM20B GPU on Tegra210" from Thierry Reding: Complement the GM20B GPU device tree node on Tegra210 with missing properties to make it usable. * tag 'tegra-for-4.7-gm20b' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: tegra: Add IOMMU node to GM20B on Tegra210 arm64: tegra: Add reference clock to GM20B on Tegra210 dt-bindings: Add documentation for GM20B GPU dt-bindings: gk20a: Document iommus property dt-bindings: gk20a: Fix typo in compatible name
2016-05-10Merge tag 'mvebu-dt64-4.7-1' of git://git.infradead.org/linux-mvebu into ↵Arnd Bergmann12-85/+367
next/dt64 Merge "mvebu dt64 for 4.7" from Gregory CLEMENT: - switch to label in the mvebu arm64 device tree - use new clock binding on Armada 7K/8K - improve SPI and I2C description on Armada 7K/8k - add CP110 block adding PCIe, SATA and USB3 - add XOR support on Armada 3700 - few more little fix * tag 'mvebu-dt64-4.7-1' of git://git.infradead.org/linux-mvebu: arm64: dts: marvell: add XOR node for Armada 3700 SoC arm64: dts: marvell: Use a SoC-specific compatible for xHCI on Armada37xx arm64: dts: marvell: Rename armada-37xx USB node arm64: dts: marvell: Clean up armada-3720-db arm64: dts: marvell: enable several CP interfaces on Armada 7040-DB arm64: dts: marvell: initial DT description of Armada 7K/8K CP110 master arm64: dts: marvell: use the proper I2C controller compatible string for 7K/8K arm64: dts: marvell: improve SPI flash description on Armada 7040-DB arm64: dts: marvell: use new clock binding on Armada AP806 arm64: dts: marvell: add UART aliases and define stdout-path arm64: dts: marvell: rename armada-ap806 XOR nodes arm64: dts: marvell: clean up armada-7040-db
2016-05-10Merge tag 'v4.7-rockchip-dts64-2' of ↵Arnd Bergmann4-57/+1147
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt64 Merge "Rockchip dts64 updates for v4.7 - part2" from Heiko Stübner: Adding the new rk3399 core devicetree support as well as a board dts for the evaluation board of this chip and similar to the arm32 side also move the rk3368 thermal data into the core soc dtsi, as there really is no need to keep it separate. * tag 'v4.7-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: dt-bindings: document rockchip rk3399-evb board arm64: dts: rockchip: add dts file for RK3399 evaluation board arm64: dts: rockchip: add core dtsi file for RK3399 SoCs dt-bindings: rockchip-dw-mshc: add description for rk3399 clk: rockchip: export some necessary rk3399 clock ids clk: rockchip: rename rga clock-id on rk3399 clk: rockchip: add general gpu soft-reset on rk3399 arm64: dts: rockchip: move the rk3368 thermal data into rk3368.dtsi clk: rockchip: fix checkpatch errors in rk3399 dt-binding header clk: rockchip: add dt-binding header for rk3399
2016-05-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+0
In netdevice.h we removed the structure in net-next that is being changes in 'net'. In macsec.c and rtnetlink.c we have overlaps between fixes in 'net' and the u64 attribute changes in 'net-next'. The mlx5 conflicts have to do with vxlan support dependencies. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-05Merge tag 'fixes-for-linus' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "Here are a couple last-minute fixes for ARM SoCs. Most of them are for the OMAP platforms, the rest are all for different platforms. OMAP: All dts fixes, mostly affecting voltages and pinctrl for various device drivers: - Regulator minimum voltage fixes for omap5 - ISP syscon register offset fix for omap3 - Fix regulator initial modes for n900 - Fix omap5 pinctrl wkup instance size Allwinner: Remove incorrect constraints from a dcdc1 regulator Alltera SoCFPGA: Fix compilation in thumb2 mode Samsung exynos: Fix a potential oops in the pm-domain error handling Davinci: Avoid a link error if NVMEM is disabled Renesas: Do not mark an external uart clock as disabled, to allow probing the uarts" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: davinci: only use NVMEM when available ARM: SoCFPGA: Fix secondary CPU startup in thumb2 kernel ARM: dts: omap5: fix range of permitted wakeup pinmux registers ARM: dts: omap3-n900: Specify peripherals LDO regulators initial mode ARM: dts: omap3: Fix ISP syscon register offset ARM: dts: omap5-cm-t54: fix ldo1_reg and ldo4_reg ranges ARM: dts: omap5-board-common: fix ldo1_reg and ldo4_reg ranges arm64: dts: r8a7795: Don't disable referenced optional scif clock ARM: EXYNOS: Properly skip unitialized parent clock in power domain on ARM: dts: sun8i-q8-common: Do not set constraints on dc1sw regulator
2016-05-02dtb: xgene: Add channel propertyIyappan Subramanian2-0/+2
Added 'channel' property, describing ethernet to CPU channel number. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-29dts: hisi: update hns dst for changing property port-id to regYisen.Zhuang\(Zhuangyuzeng\)1-4/+6
Indexes should generally be avoided. This patch changes property port-id to reg in dsaf port node. Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-29arm64: dts: marvell: add XOR node for Armada 3700 SoCGregory CLEMENT1-0/+13
Armada 3700 SoC comprise one dual-channel XOR engine and this patch adds its according representation. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-04-28arm64: dts: rockchip: add dts file for RK3399 evaluation boardJianqun Xu2-0/+125
This patch add rk3399-evb.dts for RK3399 evaluation board. Tested on RK3399 evb. Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-04-28arm64: dts: rockchip: add core dtsi file for RK3399 SoCsJianqun Xu1-0/+1013
This patch adds core dtsi file for Rockchip RK3399 SoCs. The RK3399 has big/little architecture, which needs a separate node for the PMU of each microarchitecture, for now it missing the pmu node since the old one could not work well. Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> Tested-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-04-28Merge tag 'renesas-fixes2-for-v4.6' of ↵Arnd Bergmann1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Merge "Second Round of Renesas ARM Based SoC Fixes for v4.6" from Simon Horman: * Don't disable referenced optional scif clock * tag 'renesas-fixes2-for-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: arm64: dts: r8a7795: Don't disable referenced optional scif clock ARM: shmobile: timer: Fix preset_lpj leading to too short delays Revert "ARM: dts: porter: Enable SCIF_CLK frequency and pins" ARM: dts: r8a7791: Don't disable referenced optional clocks
2016-04-28Merge tag 'hip0x-dt-for-4.7' of git://github.com/hisilicon/linux-hisi into ↵Arnd Bergmann5-1/+388
next/dt64 Merge "ARM64: DT: Hisilicon hip05 and hip06 updates for 4.7" Wei Xu: - Fix its node without msi-cells for hip05 - Add nor flash node for hip05 D02 board - Add initial dts for hip06 D03 board - Reorder and add the hip06 D03 binding in the binding document * tag 'hip0x-dt-for-4.7' of git://github.com/hisilicon/linux-hisi: Documentation: arm64: Add Hisilicon Hip06 D03 dts binding arm64: dts: Add initial dts for Hisilicon Hip06 D03 board arm64: dts: hip05: Add nor flash support arm64: dts: hip05: fix its node without msi-cells
2016-04-28Merge tag 'renesas-arm64-dt2-for-v4.7' of ↵Arnd Bergmann2-3/+112
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt64 Merge "Second Round of Renesas ARM64 Based SoC DT Updates for v4.7" from Simon Horman: * Don't disable referenced optional clocks in DT of r8a7795 SoC * Populate EXTALR in DT of salvator-x board * Enable PCIe in DT of salvator-x board * tag 'renesas-arm64-dt2-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: arm64: dts: r8a7795: Don't disable referenced optional clocks arm64: dts: salvator-x: populate EXTALR arm64: dts: r8a7795: enable PCIe on Salvator-X arm64: dts: r8a7795: Add PCIe nodes arm64: dts: r8a7795: Use USB3.0 fallback compatibility string arm64: dts: r8a7795: Add CAN support arm64: dts: r8a7795: Add CAN external clock support
2016-04-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-16/+5
Minor overlapping changes in the conflicts. In the macsec case, the change of the default ID macro name overlapped with the 64-bit netlink attribute alignment fixes in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-27arm64: dts: marvell: Use a SoC-specific compatible for xHCI on Armada37xxGregory CLEMENT1-1/+2
Even if the Armada 37xx does not any specific setup, the device tree binding documentation requires to use a SoC-specific version corresponding to the platform first followed by the generic version. This patch introduce this new compatible string and updates the documentation accordingly. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-04-27arm64: dts: marvell: Rename armada-37xx USB nodeAndreas Färber1-1/+1
No need to reflect the USB version in the node name. Cc: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> [gregory.clement@free-electrons.com: drop Fixes tag as it is not a bug fix.]
2016-04-27arm64: dts: marvell: Clean up armada-3720-dbAndreas Färber3-23/+14
Instead of duplicating the SoC's node hierarchy, including a bus node named "internal-regs", reference the actually desired nodes by label, like Berlin already does. Add labels where necessary. Drop an inconsistent white line while at it. Cc: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> [gregory.clement@free-electrons.com: drop Fixes tag as it is not a bug fix.]
2016-04-27arm64: dts: Add initial dts for Hisilicon Hip06 D03 boardKefeng Wang3-1/+344
The Hip06 soc has same cpu topology compared with Hip05, four clusters and each cluster has quard Cortex-A57, but with different IO part, like HNS, SAS and PCI, they are all upgraded. There are also not same in ITS, MBIGEN and SMMU, etc. This patch adds the initial dts for hip06 d03 board. Note, there is no serial, because the soc use LPC uart, the serial node is not needed. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-04-27arm64: dts: hip05: Add nor flash supportKefeng Wang2-0/+40
This patch is to add support nor-flash. Notice, the pre-defined partitions may not be used. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-04-27arm64: dts: hip05: fix its node without msi-cellsKefeng Wang1-0/+4
Fix commit abf9c25d55e8 ("arm64: dts: hip05: Append all gicv3 ITS entries"), it forgets the property msi-cell, see arm,gic-v3.txt. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-04-27arm64: dts: r8a7795: Use SYSC "always-on" PM DomainGeert Uytterhoeven1-55/+55
Hook up all devices that are part of the CPG/MSSR Clock Domain to the SYSC "always-on" PM Domain, for a more consistent device-power-area description in DT. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-04-27arm64: dts: r8a7795: Add SYSC PM DomainsGeert Uytterhoeven1-0/+13
Add a device node for the System Controller. Hook up the Cortex-A57 CPU cores and the Cortex-A57 and Cortex A53 L2 caches/SCUs to their respective PM Domains. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-04-27arm64: dts: r8a7795: Don't disable referenced optional clocksGeert Uytterhoeven2-4/+2
clk_get() on a disabled clock node will return -EPROBE_DEFER, which can cause drivers to be deferred forever if such clocks are referenced in their devices' clocks properties. Update the various disabled external clock nodes to default to a frequency of 0, but don't disable them, to prevent this. Reported-by: Jürg Billeter <j@bitron.ch> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-04-27arm64: dts: salvator-x: populate EXTALRWolfram Sang1-0/+4
It can be used for the watchdog. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-04-27arm64: dts: r8a7795: enable PCIe on Salvator-XPhil Edworthy1-0/+12
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-04-27arm64: dts: r8a7795: Add PCIe nodesPhil Edworthy1-0/+57
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-04-26arm64: tegra: Add IOMMU node to GM20B on Tegra210Alexandre Courbot1-0/+3
The operating system driver can take advantage of the IOMMU to remove the need for physically contiguous memory buffers. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-04-26arm64: tegra: Add reference clock to GM20B on Tegra210Alexandre Courbot1-2/+3
This clock is required for the GPU to operate. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-04-26arm64: dts: marvell: enable several CP interfaces on Armada 7040-DBThomas Petazzoni1-0/+50
This commit enables several interfaces of the CP side of the Armada 7040 for the Armada 7040 DB board: - one PCIe interface - one SPI controller with an attached SPI flash - one I2C controller - one SATA controller - two USB3 controllers Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-04-26arm64: dts: marvell: initial DT description of Armada 7K/8K CP110 masterThomas Petazzoni5-0/+232
This commit adds an initial Device Tree description for the CP110 master that is found in the Armada 7K and 8K SoCs. This initial description describes: - the system controller (to provide clocks) - three PCIe interfaces - the SATA interface - the I2C controllers - the SPI controllers For the record, the organization of the SoCs is as follows: - 7020: dual-core AP, one CP110 (master) - 7040: quad-core AP, one CP110 (master) - 8020: dual-core AP, two CP110s (master and slave) - 8040: quad-core AP, two CP110s (master and slave) For this reason, all of the 7020, 7040, 8020 and 8040 include armada-cp110-master.dtsi. When support for the second CP110 (slave) used in 8020 and 8040 will be added, the .dtsi files for those SoCs will in addition include armada-cp110-slave.dtsi. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-04-26arm64: dts: marvell: use the proper I2C controller compatible string for 7K/8KThomas Petazzoni1-1/+1
The I2C controller found in the Marvell Armada 7K/8K provides the bridge/offloading features, so the Device Tree should use the marvell,mv78230-i2c compatible string instead of marvell,mv64xxx-i2c. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-04-26arm64: dts: marvell: improve SPI flash description on Armada 7040-DBThomas Petazzoni1-9/+15
This commit slightly improves the description of the SPI flash connected to the SPI controller of the Armada 7040, by: - Using the more generic "jedec,spi-nor" compatible string, which lets the driver auto-detect the exact SPI flash type. - Removing the silly comment about the Chip Select, since reg = <0> is explicit enough. - Switching to the new Device Tree binding to describe flash partitions. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-04-26arm64: dts: marvell: use new clock binding on Armada AP806Thomas Petazzoni1-22/+12
This commit updates the Marvell AP806 Device Tree description to make use of the accepted clock Device Tree binding. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-04-26arm64: dts: marvell: add UART aliases and define stdout-pathThomas Petazzoni2-0/+9
This commit adds the necessary UART aliases to the main Armada 7K/8K .dtsi file, and uses them to define the /chosen/stdout-path property on the Armada 7040 DB board. Suggested-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-04-26arm64: dts: marvell: rename armada-ap806 XOR nodesAndreas Färber1-4/+4
Node names should not contain an instance number, the unit address serves to distinguish nodes of the same name. So rename the XOR nodes to just xor@<address>. Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Andreas Färber <afaerber@suse.de> [Thomas: - remove labels, they are really not needed for XOR engines. - remove the Fixes: tag, as this is not a fix.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-04-26arm64: dts: marvell: clean up armada-7040-dbAndreas Färber4-36/+26
Instead of duplicating the node hierarchy, reference the nodes by label, adding labels where necessary. Drop some trailing or inconsistent white lines while at it. Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Andreas Färber <afaerber@suse.de> [Thomas: drop Fixes tag as it is not a bug fix.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-04-26dts: hisi: update hns dst for separating dsaf dev supportYisen.Zhuang\(Zhuangyuzeng\)1-42/+30
Because debug dsaf port was separated from service dsaf port, this patch updates the related configurations of hns dts, changes it to match with the new binding files. This also removes enet nodes which don't exist in d02 board. Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26arm64: dts: ls2080a: fsl-mc dt node updatesStuart Yoder1-0/+98
updates to the fsl-mc node for full functionality: -msi-parent is needed for interrupt support -ranges is needed to enable the bus driver to translate bus addresses -dpmac nodes provide a basis for relating dpmac objects to PHYs Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-26arm64: dts: r8a7795: Don't disable referenced optional scif clockGeert Uytterhoeven1-1/+0
clk_get() on a disabled clock node will return -EPROBE_DEFER, which can cause drivers to be deferred forever if such clocks are referenced in their devices' clocks properties. Update the disabled external scif clock node so that it is not disabled to prevent this. Reported-by: Jürg Billeter <j@bitron.ch> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> [simon: fix for v4.6 extracted from a larger patch targeted at v4.7] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-04-25arm64: dts: uniphier: add reference clock node for PH1-LD20Masahiro Yamada1-0/+6
Add a master clock node generated by a 25MHz crystal oscillator. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-04-25arm64: dts: uniphier: use Daughter board on PH1-LD20 reference boardMasahiro Yamada2-0/+2
Include the development base board, which is equipped with some devices such as EEPROM. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-04-25Merge tag 'arm-soc/for-4.7/devicetree-arm64' of ↵Arnd Bergmann3-100/+205
http://github.com/Broadcom/stblinux into next/dt64 Pull "Broadcom ARM64-based SoC Device Tree changes" from Florian Fainelli: - Anup enables a bunch of standard peripherals in the Northstar 2 DTS: PL330 DMA, GIC maintenance interrupt, PL022 SPI controller - Anup also re-orgnanizes the clock Device Tree fragments into a separate file for consistency with how other Broadcom SoCs are doing this - Luke switches the SMP enable-method and reboot from a spin-table + syscon to the standard PSCI 1.0 firmware interface * tag 'arm-soc/for-4.7/devicetree-arm64' of http://github.com/Broadcom/stblinux: arm64: dts: NS2 secondary core enablement via PSCI arm64: dts: Add ARM PL022 SPI DT nodes for NS2 arm64: dts: Move NS2 clock DT nodes to separate DT file arm64: dts: Add maintenance interrupt for GIC in NS2 DT arm64: dts: Add ARM PL330 DMA DT node for NS2