summaryrefslogtreecommitdiff
path: root/arch/mips/boot
AgeCommit message (Collapse)AuthorFilesLines
2016-05-28MIPS: devicetree: fix cpu interrupt controller node-namesAntony Pavlov6-6/+6
Here is the quote from [1]: The unit-address must match the first address specified in the reg property of the node. If the node has no reg property, the @ and unit-address must be omitted and the node-name alone differentiates the node from other nodes at the same level This patch adjusts MIPS dts-files and devicetree binding documentation in accordance with [1]. [1] Power.org(tm) Standard for Embedded Power Architecture(tm) Platform Requirements (ePAPR). Version 1.1 – 08 April 2011. Chapter 2.2.1.1 Node Name Requirements Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13345/ Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: JZ4740: Probe OHCI platform device via DTMaarten ter Huurne1-0/+14
The DT fragment will select the ohci-platform driver, since that can handle the JZ4740 OHCI just fine. While I don't have a JZ4740-based board with anything connected to the USB host controller, I did test the generic OHCI driver successfully on a JZ4770-based board. The device is disabled by default; boards that want to use it can override the "status" property. The mass-production Qi LB60 boards don't use the USB host controller. Signed-off-by: Maarten ter Huurne <maarten@treewalker.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Paul Cercueil <paul@crapouillou.net> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13104/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: BMIPS: Adjust mips-hpt-frequency for BCM7435Florian Fainelli1-1/+1
The CPU actually runs at 1405Mhz which gives us a 175625000 Hz MIPS timer frequency (CPU frequency / 8). Fixes: e4c7d009654a ("MIPS: BMIPS: Add BCM7435 dtsi") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Cc: linux-mips@linux-mips.org Cc: john@phrozen.org Cc: cernekee@gmail.com Cc: jaedon.shin@gmail.com Patchwork: https://patchwork.linux-mips.org/patch/13132/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: dts: pic32: Update dts to reflect new PIC32MZDA clk bindingPurna Chandra Mandal3-259/+45
- now clock nodes definition is merged with core .dtsi file - only one rootclk is now part of DT - clock clients also updated based on new binding doc Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com> Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Kumar Gala <galak@codeaurora.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Sandeep Sheriker <sandeepsheriker.mallikarjun@microchip.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-clk@vger.kernel.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13248/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: BMIPS: Improve BCM6368 device treeÁlvaro Fernández Rojas2-14/+22
- Remove unneeded leds0 alias. - Switch to bcm6345-l1-intc interrupt controller. - Use interrupt-controller instead of periph_intc and cpu_intc. - Add uart1 node. - Single ohci and ehci nodes. - Avoid using underscores in node names. - Rename uart aliases to serial. - Remove blank line in cpus node. [ralf@linux-mips.org: fix references in bcm96368mvwg.dts so the file keeps building.] Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Cc: f.fainelli@gmail.com Cc: jogo@openwrt.org Cc: cernekee@gmail.com Cc: robh@kernel.org Cc: simon@fire.lp0.eu Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: BMIPS: Improve BCM6328 device treeÁlvaro Fernández Rojas1-11/+39
- Remove unneeded leds0 alias. - Switch to bcm6345-l1-intc interrupt controller. - Use interrupt-controller instead of periph_intc and cpu_intc. - Add uart1, ehci and ohci nodes. - Refactor syscon and syscon-reboot. - Avoid using underscores in node names. - Rename uart aliases to serial. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Cc: f.fainelli@gmail.com Cc: jogo@openwrt.org Cc: cernekee@gmail.com Cc: robh@kernel.org Cc: simon@fire.lp0.eu Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13043/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: BMIPS: Add device tree example for BCM6358Álvaro Fernández Rojas3-0/+178
This adds a device tree example for SFR Neufbox4 (Sercomm version), which also serves as a real example for brcm,bcm6358-leds. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Cc: f.fainelli@gmail.com Cc: jogo@openwrt.org Cc: cernekee@gmail.com Cc: robh@kernel.org Cc: simon@fire.lp0.eu Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13041/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: BMIPS: Fix interrupt and remove needless propertiesJaedon Shin3-10/+4
Fixes wrong bcm7425 SATA AHCI hardware interrupt property value with periph_intc and SATA PHY unit address, and removes needless brcm,broken-{ncq,phy} properties what are not used anywhere. Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Dragan Stancevic <dragan.stancevic@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/13017/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: BMIPS: Add support UART, I2C, SATA deviceJaedon Shin13-16/+530
Add UART, I2C, SATA device tree nodes on Broadcom BCM7xxx MIPS-based platforms. Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Dragan Stancevic <dragan.stancevic@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/13016/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: tools: Build relocs toolMatt Redfearn1-0/+1
Build the relocs tool as part of the kbuild Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Cc: linux-mips@linux-mips.org Cc: kernel-hardening@lists.openwall.com Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12980/ Patchwork: https://patchwork.linux-mips.org/patch/13242/ Patchwork: https://patchwork.linux-mips.org/patch/13233/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: tools: Add relocs toolMatt Redfearn6-0/+861
This tool is based on the x86/boot/tools/relocs tool. It parses the relocations present in the vmlinux elf file, building a table of relocations that will be necessary to run the kernel from an address other than its link address. This table is inserted into the vmlinux elf, in the .data.relocs section. The table is subsequently used by the code in arch/mips/kernel/relocate.c (added later) to relocate the kernel. The tool, by default, also marks all relocation sections as 0 length. This is due to objcopy currently being unable to handle copying the relocations between 64 and 32 bit elf files as is done when building a 64 bit kernel. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: linux-mips@linux-mips.org Cc: kernel-hardening@lists.openwall.com Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12981/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13pinctrl/lantiq: update devicetree binding in dts fileMartin Schiller1-1/+1
This patch updates the compatible string in the easy50712.dts file to the new "lantiq,danube-pinctrl". Signed-off-by: Martin Schiller <mschiller@tdt.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: robh+dt@kernel.org Cc: pawel.moll@arm.com Cc: mark.rutland@arm.com Cc: ijc+devicetree@hellion.org.uk Cc: galak@codeaurora.org Cc: john@phrozen.org Cc: hauke@hauke-m.de Cc: jogo@openwrt.org Cc: daniel.schwierzeck@gmail.com Cc: linux-gpio@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11589/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: ath79: add initial support for DPT-ModuleAntony Pavlov2-0/+79
The following features are supported: * UART; * SPI-flash; * USB host; * GPIO key and LED. Links: * https://dptechnics.com/shop/index.php?route=product/product&path=59&product_id=50 * https://dptechnics.com/shop/index.php?route=product/product&path=59&product_id=63 Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Cc: Daan Pape <daan@dptechnics.com> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12886/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: ath79: add initial support for Onion OmegaAntony Pavlov2-0/+79
The following features are supported: * UART; * SPI-flash; * USB host; * GPIO key and LED. Please see https://onion.io/omega for details. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: Alban Bedel <albeu@free.fr> Cc: L. D. Pinney <ldpinney@gmail.com> Cc: Boken Lin <bl@onion.io> Cc: Jacky Huang <huangfangcheng@163.com> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12884/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: ath79: add initial support for Dragino MS14 (Dragino 2)Antony Pavlov2-0/+103
The following features are supported: * UART; * SPI-flash; * USB host; * GPIO keys and LEDs. Links: * http://www.dragino.com/products/mother-board/item/71-ms14-p.html * https://wiki.openwrt.org/toh/dragino/ms14 Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: Alban Bedel <albeu@free.fr> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12882/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: ath79: add initial support for TP-LINK MR3020Antony Pavlov2-0/+119
The following features are supported: * UART; * SPI-flash; * USB host; * GPIO keys and LEDs. Links: * http://www.tp-link.com/en/products/details/?model=TL-MR3020 * http://wiki.openwrt.org/toh/tp-link/tl-mr3020 * https://wikidevi.com/wiki/TP-LINK_TL-MR3020 Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: Alban Bedel <albeu@free.fr> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12880/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: dts: qca: introduce AR9331 devicetreeAntony Pavlov1-0/+155
This patch introduces devicetree for Atheros AR9331 SoC (AKA Hornet). The AR9331 chip is a Wi-Fi System-On-Chip (WiSOC), typically used in very cheap Access Points and Routers. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: Alban Bedel <albeu@free.fr> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12878/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: ath79: update devicetree clock support for AR9132Antony Pavlov1-0/+1
Current ath79 clock.c code does not read reference clock and pll setup from devicetree. E.g. you can set any clock rate value in board DTS but it will have no effect on the real clk calculation. This patch fixes some AR9132 devicetree clock support defects: * clk initialization function ath79_clocks_init_dt_ng() is introduced; it actually gets pll block base register address and reference clock from devicetree; * pll register parsing code is moved to the separate ar724x_clk_init() function; this function can be called from platform code or from devicetree code. Also mips_hpt_frequency value is set from dt, so the appropriate clock parameter is added to the cpu@0 devicetree node. The same approach can be used for adding AR9331 devicetree support. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: Alban Bedel <albeu@free.fr> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-clk@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12876/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: ath79: Introduce <dt-bindings/clock/ath79-clk.h>Antony Pavlov1-3/+5
The include/dt-bindings/clock/ath79-clk.h header file is introduced so we can use symbolic identifiers for SoC clocks. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: Alban Bedel <albeu@free.fr> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@linux-mips.org Cc: linux-clk@vger.kernel.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12875/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: dts: qca: ar9132: use short references for dt nodesAntony Pavlov2-53/+49
Here are some Sascha Hauer's arguments for using aliases in the dts files: - using aliases reduces the number of indentations in dts files; - dts files become independent of the layout of the dtsi files (it becomes possible to introduce another bus {} hierarchy between a toplevel bus and the devices when you have to); - less chances for typos. if &i2c2 does not exist you get an error. If instead you duplicate the whole path in the dts file a typo in the path will just create another node. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Cc: Alban Bedel <albeu@free.fr> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12873/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: dts: qca: ar9132_tl_wr1043nd_v1.dts: drop unused alias nodeAntony Pavlov1-4/+0
The TP-LINK TL-WR1043ND board has only one serial port, so replacing the default of 0 with 0 does nothing useful. Moreover, the correct name for aliases node is "aliases" not "alias". An overview of the "aliases" node usage can be found on the device tree usage page at devicetree.org [1]. Also please see chapter 3.3 ("Aliases node") of the ePAPR 1.1 [2]. [1] http://devicetree.org/Device_Tree_Usage#aliases_Node [2] https://www.power.org/documentation/epapr-version-1-1/ Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Acked-by: Alban Bedel <albeu@free.fr> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12872/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Octeon: Add DTS for EdgeRouter LiteAaro Koskinen1-0/+59
Add DTS for EdgeRouter Lite that is usable as is without any "pruning" with APPENDED_DTB. Compared to builtin generic DTB, we can avoid errors and delays from probing non-existent I2C devices. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Octeon: Add DTS for D-Link DSR-1000NAaro Koskinen3-202/+312
Add DTS for D-Link DSR-1000N that is usable as is without any "pruning" with APPENDED_DTB. Split out the common parts from octeon_3xxx.dts into octeon_3xxx.dtsi. Compared to builtin generic DTB, we can specificy fixed links properly and avoid probing non-existent I2C devices. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: David Daney <ddaney.cavm@gmail.com> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12840/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: ath79: Add zboot debug serial supportAlban Bedel1-0/+5
Reuse the early printk code to support the serial in zboot. We copy early_printk.c instead of referencing it because we need to build a different object file for the normal kernel and zboot. Signed-off-by: Alban Bedel <albeu@free.fr> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12234/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: ath79: Remove the builtin DTB supportAlban Bedel1-3/+0
Now that appended DTB is usable we can drop the builtin DTB support. Signed-off-by: Alban Bedel <albeu@free.fr> Cc: Felix Fietkau <nbd@openwrt.org> Cc: Antony Pavlov <antonynpavlov@gmail.com> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12231/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-09MIPS: BMIPS: Remove maxcpus from BCM97435SVMB DTSFlorian Fainelli1-1/+1
Now that SMP properly works on 7435, do not restrict the number of core, unleash them all. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Cc: john@phrozen.org Cc: cernekee@gmail.com Cc: jon.fraser@broadcom.com Cc: jaedon.shin@gmail.com Cc: dragan.stancevic@gmail.com Cc: jogo@openwrt.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12379/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-09MIPS: BMIPS: Add missing 7038 L1 register cells to BCM7435Florian Fainelli1-2/+3
7435 has 4 7038 L1 base register address for each of its Core + TP (for a total of 4 threads of execution), add the two missing cells for Core 1. We are providing HW interrupts 2/3 even for Core 1/TP0/TP1 because that's what they are, and we can later decide to remap these in software to provide proper interrupt affinity/parenting. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Cc: john@phrozen.org Cc: cernekee@gmail.com Cc: jon.fraser@broadcom.com Cc: jaedon.shin@gmail.com Cc: dragan.stancevic@gmail.com Cc: jogo@openwrt.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12378/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-04-04MIPS: BMIPS: Fix gisb-arb compatible string for 7435Florian Fainelli1-1/+1
The SUN GISB arbiter was added with the wrong compatible string, leading to using the wrong register layout, use the correct compatible string for this chip: brcm,bcm7435-gisb-arb. Fixes: 8394968be4c7 ("MIPS: BMIPS: Add BCM7435 dtsi") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Cc: blogic@openwrt.org Cc: cernekee@gmail.com Cc: jogo@openwrt.org Cc: jaedon.shin@gmail.com Cc: pgynther@google.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12285/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-04-03MIPS: dts: qca: ar9132_tl_wr1043nd_v1.dts: use "ref" for reference clock nameAntony Pavlov1-1/+1
Current ath79 clock.c code does not read reference clock and pll setup from devicetree. The ar724x_clocks_init() function recreates the clocks from scratch so devicetree clock information is dropped. After adding the code which picked up reference clock from devicetree I have found that kernel does not boot anymore. The SPI and UART drivers can't get clk; here are the bootlog error messages: of_serial: probe of 18020000.uart failed with error -22 ath79-spi: probe of 1f000000.spi failed with error -22 The problem is that clock code assumes that reference clock name is "ref" but current dts-file uses another name: "oscillator". This patch fixes the problem by changing external oscillator dt node name to "ref". Please note that there is an alternative solution for the problem: > --- a/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts > +++ b/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts > @@ -16,6 +16,7 @@ > > extosc: oscillator { > compatible = "fixed-clock"; > + clock-output-names = "ref"; > #clock-cells = <0>; > clock-frequency = <40000000>; > }; Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Cc: Alban Bedel <albeu@free.fr> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-clk@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12874/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-04-03dt-bindings: clock: qca,ath79-pll: fix copy-paste typosAntony Pavlov1-1/+1
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Cc: Alban Bedel <albeu@free.fr> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12869/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-04-03MIPS: zboot: Remove copied source files on cleanAlban Bedel1-0/+1
The copied source files must be added to the extra-y list to have them removed on clean. Signed-off-by: Alban Bedel <albeu@free.fr> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12233/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-04-03MIPS: zboot: Fix the build with XZ compression on older GCC versionsAlban Bedel1-3/+3
Some older GCC version (at least 4.6) emits calls to __bswapsi2() when building the XZ decompressor. The link of the compressed image then fails with the following error: arch/mips/boot/compressed/decompress.o: In function '__fswab32': include/uapi/linux/swab.h:60: undefined reference to '__bswapsi2' Add bswapsi.o to the link to fix the build with these versions. Signed-off-by: Alban Bedel <albeu@free.fr> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12232/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-03-15Merge tag 'regmap-v4.6' of ↵Linus Torvalds10-10/+10
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap updates from Mark Brown: "This has been a very busy release for regmap, not just in cleaning up the mess we got ourselves into with the endianness handling but also in other areas too: - Fixes for the endianness handling so that we now explicitly default to little endian (the code used to do this by accident). This fixes handling of explictly specified endianness on big endian systems. - Optimisation of the implementation of register striding. - A refectoring of the _update_bits() code to reduce duplication. - Fixes and enhancements for the interrupt implementation which make it easier to use in a wider range of systems" * tag 'regmap-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: (28 commits) regmap: irq: add devm apis for regmap_{add,del}_irq_chip regmap: replace regmap_write_bits() regmap: irq: Enable irq retriggering for nested irqs regmap: add regmap_fields_force_xxx() macros regmap: add regmap_field_force_xxx() macros regmap: merge regmap_fields_update_bits() into macro regmap: merge regmap_fields_write() into macro regmap: add regmap_fields_update_bits_base() regmap: merge regmap_field_update_bits() into macro regmap: merge regmap_field_write() into macro regmap: add regmap_field_update_bits_base() regmap: merge regmap_update_bits_check_async() into macro regmap: merge regmap_update_bits_check() into macro regmap: merge regmap_update_bits_async() into macro regmap: merge regmap_update_bits() into macro regmap: add regmap_update_bits_base() regcache: flat: Introduce register strider order regcache: Introduce the index parsing API by stride order regmap: core: Introduce register stride order regmap: irq: add devm apis for regmap_{add,del}_irq_chip ...
2016-03-13MIPS: Fix build with DEBUG_ZBOOT and MACH_JZ4780Aaro Koskinen1-1/+1
Ingenic SoC declares ZBOOT support, but debug definitions are missing for MACH_JZ4780 resulting in a build failure when DEBUG_ZBOOT is set. The UART addresses are same as with JZ4740, so fix by covering JZ4780 with those as well. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12830/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-02-05regmap: mmio: Revert to v4.4 endianness handlingMark Brown9-0/+9
Commit 29bb45f25ff3 (regmap-mmio: Use native endianness for read/write) attempted to fix some long standing bugs in the MMIO implementation for big endian systems caused by duplicate byte swapping in both regmap and readl()/writel() which affected MIPS systems as when they are in big endian mode they flip the endianness of all registers in the system, not just the CPU. MIPS systems had worked around this by declaring regmap using IPs as little endian which is inaccurate, unfortunately the issue had not been reported. Sadly the fix makes things worse rather than better. By changing the behaviour to match the documentation it caused behaviour changes for other IPs which broke them and by using the __raw I/O accessors to avoid the endianness swapping in readl()/writel() it removed some memory ordering guarantees and could potentially generate unvirtualisable instructions on some architectures. Unfortunately sorting out all this mess in any half way sensible fashion was far too invasive to go in during an -rc cycle so instead let's go back to the old broken behaviour for v4.5, the better fixes are already queued for v4.6. This does mean that we keep the broken MIPS DTs for another release but that seems the least bad way of handling the situation. Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-27MIPS: dt: Explicitly specify native endian behaviour for sysconMark Brown10-1/+10
On many MIPS systems the endianness of IP blocks is kept the same as that of the CPU by the hardware. This includes the system controllers on these systems which are controlled via syscon which uses the regmap API which used readl() and writel() to interact with the hardware, meaning that all writes are converted to little endian when writing to the hardware. This caused a bad interaction with the regmap core in big endian mode since it was not aware of the byte swapping and so ended up performing little endian writes. Unfortunately when this issue was noticed it was addressed by updating the DT for the affected devices to specify them as little endian. This happened to work since it resulted in two endianness swaps which cancelled each other out and gave little endian behaviour but meant that the DT was clearly not accurately describing the hardware. The intention of commit 29bb45f25ff305 (regmap-mmio: Use native endianness for read/write) was to fix this by making regmap default to native endianness but this breaks most other MMIO users where the hardware has a fixed endianness and the implementation uses the __raw accessors which are not intended to be used outside of architecture code. Instead use the newly added native-endian DT property to say exactly what we want for these systems. Fixes: 29bb45f25ff305 (regmap-mmio: Use native endianness for read/write) Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Mark Brown <broonie@kernel.org> Acked-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds13-6/+852
Pull MIPS updates from Ralf Baechle: "This is the main pull request for MIPS for 4.5 plus some 4.4 fixes. The executive summary: - ATH79 platform improvments, use DT bindings for the ATH79 USB PHY. - Avoid useless rebuilds for zboot. - jz4780: Add NEMC, BCH and NAND device tree nodes - Initial support for the MicroChip's DT platform. As all the device drivers are missing this is still of limited use. - Some Loongson3 cleanups. - The unavoidable whitespace polishing. - Reduce clock skew when synchronizing the CPU cycle counters on CPU startup. - Add MIPS R6 fixes. - Lots of cleanups across arch/mips as fallout from KVM. - Lots of minor fixes and changes for IEEE 754-2008 support to the FPU emulator / fp-assist software. - Minor Ralink, BCM47xx and bcm963xx platform support improvments. - Support SMP on BCM63168" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (84 commits) MIPS: zboot: Add support for serial debug using the PROM MIPS: zboot: Avoid useless rebuilds MIPS: BMIPS: Enable ARCH_WANT_OPTIONAL_GPIOLIB MIPS: bcm63xx: nvram: Remove unused bcm63xx_nvram_get_psi_size() function MIPS: bcm963xx: Update bcm_tag field image_sequence MIPS: bcm963xx: Move extended flash address to bcm_tag header file MIPS: bcm963xx: Move Broadcom BCM963xx image tag data structure MIPS: bcm63xx: nvram: Use nvram structure definition from header file MIPS: bcm963xx: Add Broadcom BCM963xx board nvram data structure MAINTAINERS: Add KVM for MIPS entry MIPS: KVM: Add missing newline to kvm_err() MIPS: Move KVM specific opcodes into asm/inst.h MIPS: KVM: Use cacheops.h definitions MIPS: Break down cacheops.h definitions MIPS: Use EXCCODE_ constants with set_except_vector() MIPS: Update trap codes MIPS: Move Cause.ExcCode trap codes to mipsregs.h MIPS: KVM: Make kvm_mips_{init,exit}() static MIPS: KVM: Refactor added offsetof()s MIPS: KVM: Convert EXPORT_SYMBOL to _GPL ...
2016-01-24MIPS: zboot: Add support for serial debug using the PROMAlban Bedel2-0/+8
As most platforms implement the PROM serial interface prom_putchar() add a simple bridge to allow re-using this code for zboot. Signed-off-by: Alban Bedel <albeu@free.fr> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11811/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: zboot: Avoid useless rebuildsAlban Bedel1-6/+8
Add dummy.o to the targets list, and fill targets automatically from $(vmlinuzobjs) to avoid having to maintain two lists. When building with XZ compression copy ashldi3.c to the build directory to use a different object file for the kernel and zboot. Without this the same object file need to be build with different flags which cause a rebuild at every run. Signed-off-by: Alban Bedel <albeu@free.fr> Cc: linux-mips@linux-mips.org Cc: Alex Smith <alex.smith@imgtec.com> Cc: Wu Zhangjin <wuzhangjin@gmail.com> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11810/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: dts: Add initial DTS for the PIC32MZDA Starter KitJoshua Henderson5-0/+681
This adds basic DTS configuration for the PIC32MZDA chip and in turn the PIC32MZDA Starter Kit. Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12104/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: bmips: Improve BCM6368 device treeÁlvaro Fernández Rojas1-0/+22
Add brcm,bcm6358-leds node to bcm6368.dtsi Add reboot support (syscon-reboot as defined in BCM6328) Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Cc: f.fainelli@gmail.com Cc: jogo@openwrt.org Cc: cernekee@gmail.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: Álvaro Fernández Rojas <noltari@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/12117/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: bmips: Improve BCM6328 device treeÁlvaro Fernández Rojas1-0/+9
Adds bcm6328-leds node to bcm6328.dtsi Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Cc: jogo@openwrt.org Cc: cernekee@gmail.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: Álvaro Fernández Rojas <noltari@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/12116/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-05Merge remote-tracking branches 'regmap/topic/mmio', 'regmap/topic/rbtree' ↵Mark Brown9-9/+0
and 'regmap/topic/seq' into regmap-next
2016-01-04MIPS: dts: jz4780/ci20: Add NEMC, BCH and NAND device tree nodesAlex Smith2-0/+90
Add device tree nodes for the NEMC and BCH to the JZ4780 device tree, and make use of them in the Ci20 device tree to add a node for the board's NAND. Note that since the pinctrl driver is not yet upstream, this includes neither pin configuration nor busy/write-protect GPIO pins for the NAND. Use of the NAND relies on the boot loader to have left the pins configured in a usable state, which should be the case when booted from the NAND. [ralf@linux-mips.org: fold in Geert Uytterhoeven's patch and acks from Harvey's latest version.] Signed-off-by: Alex Smith <alex.smith@imgtec.com> Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Alex Smith <alex.smith@imgtec.com> Cc: linux-mtd@lists.infradead.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-mtd@lists.infradead.org Patchwork: https://patchwork.linux-mips.org/patch/11695/ Patchwork: https://patchwork.linux-mips.org/patch/11914/ Patchwork: https://patchwork.linux-mips.org/patch/11985/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-04MIPS: ath79: Enable the USB port on the TL-WR1043NDAlban Bedel1-0/+8
Signed-off-by: Alban Bedel <albeu@free.fr> Cc: linux-mips@linux-mips.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11499/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-04MIPS: ath79: Add the EHCI controller and USB phy to the AR9132 dtsiAlban Bedel1-0/+26
Signed-off-by: Alban Bedel <albeu@free.fr> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11498/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-11-20MIPS: ath79: Fix the size of the MISC INTC registers in ar9132.dtsiAlban Bedel1-1/+1
There is 2 registers that is 8 bytes long, not 4. Signed-off-by: Alban Bedel <albeu@free.fr> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Alexander Couzens <lynxis@fe80.eu> Cc: Joel Porquet <joel@porquet.org> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11508/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-11-16regmap-mmio: Use native endianness for read/writeSimon Arlott9-9/+0
The regmap API has an endianness setting for formatting reads and writes. This can be set by the usual DT "little-endian" and "big-endian" properties. To work properly the associated regmap_bus needs to read/write in native endian. The "syscon" DT device binding creates an mmio-based regmap_bus which performs all reads/writes as little-endian. These values are then converted again by regmap, which means that all of the MIPS BCM boards (which are big-endian) have been declared as "little-endian" to get regmap to convert them back to big-endian. Modify regmap-mmio to use the native-endian functions __raw_read*() and __raw_write*() instead of the little-endian functions read*() and write*(). Modify the big-endian MIPS BCM boards to use what will now be the correct endianness instead of pretending that the devices are little-endian. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-15Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds14-8/+527
Pull MIPS updates from Ralf Baechle: "These are the highlists of the main MIPS pull request for 4.4: - Add latencytop support - Support appended DTBs - VDSO support and initially use it for gettimeofday. - Drop the .MIPS.abiflags and ELF NOTE sections from vmlinux - Support for the 5KE, an internal test core. - Switch all MIPS platfroms to libata drivers. - Improved support, cleanups for ralink and Lantiq platforms. - Support for the new xilfpga platform. - A number of DTB improvments for BMIPS. - Improved support for CM and CPS. - Minor JZ4740 and BCM47xx enhancements" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (120 commits) MIPS: idle: add case for CPU_5KE MIPS: Octeon: Support APPENDED_DTB MIPS: vmlinux: create a section for appended DTB MIPS: Clean up compat_siginfo_t MIPS: Fix PAGE_MASK definition MIPS: BMIPS: Enable GZIP ramdisk and timed printks MIPS: Add xilfpga defconfig MIPS: xilfpga: Add mipsfpga platform code MIPS: xilfpga: Add xilfpga device tree files. dt-bindings: MIPS: Document xilfpga bindings and boot style MIPS: Make MIPS_CMDLINE_DTB default MIPS: Make the kernel arguments from dtb available MIPS: Use USE_OF as the guard for appended dtb MIPS: BCM63XX: Use pr_* instead of printk MIPS: Loongson: Cleanup CONFIG_LOONGSON_SUSPEND. MIPS: lantiq: Disable xbar fpi burst mode MIPS: lantiq: Force the crossbar to big endian MIPS: lantiq: Initialize the USB core on boot MIPS: lantiq: Return correct value for fpi clock on ar9 MIPS: ralink: Add missing clock on rt305x ...
2015-11-11MIPS: xilfpga: Add xilfpga device tree files.Zubair Lutfullah Kakakhel4-0/+77
Add device tree files for the MIPSfpga platform. See Documentation/devicetree/bindings/mips/img/xilfpga.txt for details about MIPSfpga Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Cc: robh+dt@kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11362/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>