summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2014-10-15r8169: add ethtool eeprom change/dump featurertl-eeprom-3.17Peter Wu2-3/+156
This adds the ability to read and change EEPROM for 93C46/93C56 serial EEPROM. Two-Wire serial interface and SPI are not supported. (Do not even try this for SPI or other chips, it may break your hardware.) Works with RTL8169SCL (driver detects RTL8169sb), with some quirks. Not sure if it is a hardware bug, but to be able to read EEPROM, one has to write something, e.g.: printf '\0\0' | ethtool -E eth0 magic 0x8169 offset 0x40 length 2 Otherwise, only zeroes are read. Another note for this NIC, one has to "enable" the eeprom by writing to it (as shown above) and then make the NIC to reload the contents from firmware such that the PCI ID gets detected correctly (10ec:8169 instead of 10ec:8129). Reload by writing 0x40 (Auto-load) to register 0x50 (9346CR): printf '\x40' | dd seek=80 bs=1 \ of=/sys/bus/pci/devices/0000:03:00.0/resource0 Then detach and rescan the PCI device (use `lspci -tv` to find parent): echo 1 > /sys/bus/pci/devices/0000\:03\:00.0/remove echo 1 > /sys/bus/pci/devices/0000\:02\:00.0/rescan After this, this RTL8169sb PCI GbE NIC appears to work. On a second RTL8188E onboard GbE chip, EEPROM cannot be dumped, writing also does nothing. Here, reads all return FFs. Signed-off-by: Peter Wu <lekensteyn@gmail.com>
2014-10-153c59x: fix bad split of cpu_to_le32(pci_map_single())Sylvain \\\"ythier\\\" Hitier1-1/+1
[ Upstream commit 88b09a6d958af6c458acf055ee2eb5bc9564efda ] In commit 6f2b6a3005b2c34c39f207a87667564f64f2f91a, # 3c59x: Add dma error checking and recovery the intent is to split out the mapping from the byte-swapping in order to insert a dma_mapping_error() check. Kinda this semantic patch: // See http://coccinelle.lip6.fr/ // // Beware, grouik-and-dirty! @@ expression DEV, X, Y, Z; @@ - cpu_to_le32(pci_map_single(DEV, X, Y, Z)) + dma_addr_t addr = pci_map_single(DEV, X, Y, Z); + if (dma_mapping_error(&DEV->dev, addr)) + /* snip */; + cpu_to_le32(addr) However, the #else part (of the #if DO_ZEROCOPY test) is changed this way: - cpu_to_le32(pci_map_single(DEV, X, Y, Z)) + dma_addr_t addr = cpu_to_le32(pci_map_single(DEV, X, Y, Z)); // ^^^^^^^^^^^ // That mismatches the 3 other changes! + if (dma_mapping_error(&DEV->dev, addr)) + /* snip */; + cpu_to_le32(addr) Let's remove the leftover cpu_to_le32() for coherency. v2: Better changelog. v3: Add Acked-by Fixes: 6f2b6a3005b2c34c39f207a87667564f64f2f91a # 3c59x: Add dma error checking and recovery Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Sylvain "ythier" Hitier <sylvain.hitier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-15hyperv: Fix a bug in netvsc_send()KY Srinivasan1-7/+8
[ Upstream commit 3a67c9ccad926a168d8b7891537a452018368a5b ] After the packet is successfully sent, we should not touch the packet as it may have been freed. This patch is based on the work done by Long Li <longli@microsoft.com>. David, please queue this up for stable. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reported-by: Sitsofe Wheeler <sitsofe@yahoo.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-15team: avoid race condition in scheduling delayed workJoe Lawrence1-2/+2
[ Upstream commit 47549650abd13d873fd2e5fc218db19e21031074 ] When team_notify_peers and team_mcast_rejoin are called, they both reset their respective .count_pending atomic variable. Then when the actual worker function is executed, the variable is atomically decremented. This pattern introduces a potential race condition where the .count_pending rolls over and the worker function keeps rescheduling until .count_pending decrements to zero again: THREAD 1 THREAD 2 ======== ======== team_notify_peers(teamX) atomic_set count_pending = 1 schedule_delayed_work team_notify_peers(teamX) atomic_set count_pending = 1 team_notify_peers_work atomic_dec_and_test count_pending = 0 (return) schedule_delayed_work team_notify_peers_work atomic_dec_and_test count_pending = -1 schedule_delayed_work (repeat until count_pending = 0) Instead of assigning a new value to .count_pending, use atomic_add to tack-on the additional desired worker function invocations. Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Fixes: fc423ff00df3a19554414ee ("team: add peer notification") Fixes: 492b200efdd20b8fcfdac87 ("team: add support for sending multicast rejoins") Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-15net: systemport: fix bcm_sysport_insert_tsb()Florian Fainelli1-6/+7
[ Upstream commit e87474a6e697857df21cff0707a2472abceca8b3 ] Similar to commit bc23333ba11fb7f959b7e87e121122f5a0fbbca8 ("net: bcmgenet: fix bcmgenet_put_tx_csum()"), we need to return the skb pointer in case we had to reallocate the SKB headroom. Fixes: 80105befdb4b8 ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-01r8152: disable power cut for RTL8153hayeswang1-1/+1
The firmware would be clear when the power cut is enabled for RTL8153. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01r8152: remove clearing bphayeswang1-27/+1
The xxx_clear_bp() is used to halt the firmware. It only necessary for updating the new firmware. Besides, depend on the version of the current firmware, it may have problem to halt the firmware directly. Finally, halt the firmware would let the firmware code useless, and the bugs which are fixed by the firmware would occur. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01bnx2: Correctly receive full sized 802.1ad fragmesVlad Yasevich1-2/+3
This driver, similar to tg3, has a check that will cause full sized 802.1ad frames to be dropped. The frame will be larger then the standard mtu due to the presense of vlan header that has not been stripped. The driver should not drop this frame and should process it just like it does for 802.1q. CC: Sony Chacko <sony.chacko@qlogic.com> CC: Dept-HSGLinuxNICDev@qlogic.com Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01tg3: Allow for recieve of full-size 8021AD framesVlad Yasevich1-1/+2
When receiving a vlan-tagged frame that still contains a vlan header, the length of the packet will be greater then MTU+ETH_HLEN since it will account of the extra vlan header. TG3 checks this for the case for 802.1Q, but not for 802.1ad. As a result, full sized 802.1ad frames get dropped by the card. Add a check for 802.1ad protocol when receving full sized frames. Suggested-by: Prashant Sreedharan <prashant@broadcom.com> CC: Prashant Sreedharan <prashant@broadcom.com> CC: Michael Chan <mchan@broadcom.com> Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30r8152: fix setting RTL8152_UNPLUGhayeswang1-1/+5
The flag of RTL8152_UNPLUG should only be set when the device is unplugged, not each time the rtl8152_disconnect() is called. Otherwise, the device wouldn't be stopped normally. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30netxen: Fix bug in Tx completion path.Manish Chopra1-2/+2
o Driver is not updating sw_consumer while processing Tx completion when interface is going down. Due to this interface down path gets stuck forever waiting for NAPI to complete. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30netxen: Fix BUG "sleeping function called from invalid context"Manish Chopra2-2/+2
o __netxen_nic_down() function might sleep while holding spinlock_t(tx_clean_lock). Acquire this lock for only releasing TX buffers instead of taking it for whole down path. Reported-by: Mike Galbraith <umgwanakikbuti@gmail.com> Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30hyperv: Fix a bug in netvsc_start_xmit()KY Srinivasan1-1/+2
After the packet is successfully sent, we should not touch the skb as it may have been freed. This patch is based on the work done by Long Li <longli@microsoft.com>. In this version of the patch I have fixed issues pointed out by David. David, please queue this up for stable. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Tested-by: Long Li <longli@microsoft.com> Tested-by: Sitsofe Wheeler <sitsofe@yahoo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-29net: stmmac: fix stmmac_pci_probe failed when CONFIG_HAVE_CLK is selectedKweh, Hock Leong1-2/+9
When the CONFIG_HAVE_CLK is selected for the system, the stmmac_pci_probe will fail with dmesg: [ 2.167225] stmmaceth 0000:00:14.6: enabling device (0000 -> 0002) [ 2.178267] stmmaceth 0000:00:14.6: enabling bus mastering [ 2.178436] stmmaceth 0000:00:14.6: irq 24 for MSI/MSI-X [ 2.178703] stmmaceth 0000:00:14.6: stmmac_dvr_probe: warning: cannot get CSR clock [ 2.186503] stmmac_pci_probe: main driver probe failed [ 2.194003] stmmaceth 0000:00:14.6: disabling bus mastering [ 2.196473] stmmaceth: probe of 0000:00:14.6 failed with error -2 This patch fix the issue by breaking the dependency to devm_clk_get() as the CSR clock can be obtained at priv->plat->clk_csr from pci driver. Reported-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de> Signed-off-by: Kweh, Hock Leong <hock.leong.kweh@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26net/mlx4_core: Allow not to specify probe_vf in SRIOV IB modeMatan Barak1-2/+2
When the HCA is configured in SRIOV IB mode (that is, at least one of the ports is IB) and the probe_vf module param isn't specified, mlx4_init_one() failed because of the following condition: if (ib_ports && (num_vfs_argc > 1 || probe_vfs_argc > 1)) { ..... } The root cause for that is a mistake in the initialization of num_vfs_argc and probe_vfs_argc. When num_vfs / probe_vf aren't given, their argument count counterpart should be 0, fix that. Fixes: dd41cc3bb90e ('net/mlx4: Adapt num_vfs/probed_vf params for single port VF') Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26r8152: fix the carrier off when autoresuminghayeswang1-17/+35
netif_carrier_off would be called when autoresuming, even though the cable is plugged. This causes some applications do relative actions when detecting the carrier off. Keep the status of the carrier, and let it be modified when the linking change occurs. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26Revert "net/macb: add pinctrl consumer support"Soren Brinkmann1-11/+0
This reverts commit 8ef29f8aae524bd51298fb10ac6a5ce6c4c5a3d8. The driver core already calls pinctrl_get() and claims the default state. There is no need to replicate this in the driver. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26macvtap: Fix race between device delete and open.Vlad Yasevich1-10/+8
In macvtap device delete and open calls can race and this causes a list curruption of the vlan queue_list. The race intself is triggered by the idr accessors that located the vlan device. The device is stored into and removed from the idr under both an rtnl and a mutex. However, when attempting to locate the device in idr, only a mutex is taken. As a result, once cpu perfoming a delete may take an rtnl and wait for the mutex, while another cput doing an open() will take the idr mutex first to fetch the device pointer and later take an rtnl to add a queue for the device which may have just gotten deleted. With this patch, we now hold the rtnl for the duration of the macvtap_open() call thus making sure that open will not race with delete. CC: Michael S. Tsirkin <mst@redhat.com> CC: Jason Wang <jasowang@redhat.com> Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26qlcnic: Fix ordering of stats in stats buffer.Manish Chopra1-0/+2
o When TX queues are not allocated, driver does not fill TX queues stats in the buffer. However, it is also not advancing data pointer by TX queue stats length, which would misplace all successive stats data in the buffer and will result in mismatch between stats strings and it's values. o Fix this by advancing data pointer by TX queue stats length when queues are not allocated. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26qlcnic: Remove __QLCNIC_DEV_UP bit check to read TX queues statistics.Manish Chopra1-1/+1
o TX queues stats must be read when queues are allocated regardless of interface is up or not. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26qlcnic: Fix memory corruption while reading stats using ethtool.Manish Chopra1-4/+2
o Driver is doing memset with zero for total number of stats bytes when it has already filled some data in the stats buffer, which can overwrite memory area beyond the length of stats buffer. o Fix this by initializing stats buffer with zero before filling any data in it. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26qlcnic: Use qlcnic_83xx_flash_read32() API instead of lockless version of ↵Sony Chacko1-3/+2
the API. In qlcnic_83xx_setup_idc_parameters() routine use qlcnic_83xx_flash_read32() API which takes flash lock internally instead of the lockless version qlcnic_83xx_lockless_flash_read32(). Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2-2/+2
Pull networking fixes from David Miller: "Here is a quick pull request primarily meant to address the deconfig fallout from changing SCSI_NETLINK from being used via 'select' to being used via 'depends'. I applied a set of 5 patches written by Michal Marek, and then I carefully audited all of the remaining config files, basically: 1) I scanned every arch config file, and if it mentioned CONFIG_INET or CONFIG_UNIX, I made sure it had CONFIG_NET=y 2) After that, I scanned every arch config file, and if it did not have CONFIG_NET=y I made sure it did not reference any networking config options. Finally, we have some late breaking wireless fixes in here from John Linville and co" [ And there's a sparc bpf fix snuck in too ] * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: sparc: bpf_jit: fix loads from negative offsets parisc: Update defconfigs which were missing CONFIG_NET. powerpc: Update defconfigs which were missing CONFIG_NET. s390: Update defconfigs which were missing CONFIG_NET. mips: Update some more defconfigs which were missing CONFIG_NET. sparc: Set CONFIG_NET=y in defconfigs sh: Set CONFIG_NET=y in defconfigs powerpc: Set CONFIG_NET=y in defconfigs parisc: Set CONFIG_NET=y in defconfigs mips: Set CONFIG_NET=y in defconfigs brcmfmac: Fix off by one bug in brcmf_count_20mhz_channels() ath9k: Fix NULL pointer dereference on early irq net: rfkill: gpio: Fix clock status NFC: st21nfca: Fix potential depmod dependency cycle NFC: st21nfcb: Fix depmod dependency cycle NFC: microread: Potential overflows in microread_target_discovered()
2014-09-24Merge tag 'master-2014-09-23' of ↵David S. Miller2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== pull request: wireless 2014-09-23 Please consider pulling this one last batch of fixes intended for the 3.17 stream! For the NFC bits, Samuel says: "Hopefully not too late for a handful of NFC fixes: - 2 potential build failures for ST21NFCA and ST21NFCB, triggered by a depmod dependenyc cycle. - One potential buffer overflow in the microread driver." On top of that... Emil Goode provides a fix for a brcmfmac off-by-one regression which was introduced in the 3.17 cycle. Loic Poulain fixes a polarity mismatch for a variable assignment inside of rfkill-gpio. Wojciech Dubowik prevents a NULL pointer dereference in ath9k. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-23Merge tag 'rdma-for-linus' of ↵Linus Torvalds2-15/+29
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband/rdma fixes from Roland Dreier: "Last late set of InfiniBand/RDMA fixes for 3.17: - fixes for the new memory region re-registration support - iSER initiator error path fixes - grab bag of small fixes for the qib and ocrdma hardware drivers - larger set of fixes for mlx4, especially in RoCE mode" * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (26 commits) IB/mlx4: Fix VF mac handling in RoCE IB/mlx4: Do not allow APM under RoCE IB/mlx4: Don't update QP1 in native mode IB/mlx4: Avoid accessing netdevice when building RoCE qp1 header mlx4: Fix mlx4 reg/unreg mac to work properly with 0-mac addresses IB/core: When marshaling uverbs path, clear unused fields IB/mlx4: Avoid executing gid task when device is being removed IB/mlx4: Fix lockdep splat for the iboe lock IB/mlx4: Get upper dev addresses as RoCE GIDs when port comes up IB/mlx4: Reorder steps in RoCE GID table initialization IB/mlx4: Don't duplicate the default RoCE GID IB/mlx4: Avoid null pointer dereference in mlx4_ib_scan_netdevs() IB/iser: Bump version to 1.4.1 IB/iser: Allow bind only when connection state is UP IB/iser: Fix RX/TX CQ resource leak on error flow RDMA/ocrdma: Use right macro in query AH RDMA/ocrdma: Resolve L2 address when creating user AH mlx4: Correct error flows in rereg_mr IB/qib: Correct reference counting in debugfs qp_stats IPoIB: Remove unnecessary port query ...
2014-09-23brcmfmac: Fix off by one bug in brcmf_count_20mhz_channels()Emil Goode1-1/+1
In the brcmf_count_20mhz_channels function we are looping through a list of channels received from firmware. Since the index of the first channel is 0 the condition leads to an off by one bug. This is causing us to hit the WARN_ON_ONCE(1) calls in the brcmu_d11n_decchspec function, which is how I discovered the bug. Introduced by: commit b48d891676f756d48b4d0ee131e4a7a5d43ca417 ("brcmfmac: rework wiphy structure setup") Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Emil Goode <emilgoode@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-22net: bcmgenet: call bcmgenet_dma_teardown in bcmgenet_fini_dmaFlorian Fainelli1-53/+52
We should not be manipulaging the DMA_CTRL registers directly by writing 0 to them to disable DMA. This is an operation that needs to be timed to make sure the DMA engines have been properly stopped since their state machine stops on a packet boundary, not immediately. Make sure that tha bcmgenet_fini_dma() calls bcmgenet_dma_teardown() to ensure a proper DMA engine state. As a result, we need to reorder the function bodies to resolve the use dependency. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22net: bcmgenet: fix TX reclaim accounting for fragmentsFlorian Fainelli1-1/+4
The GENET driver supports SKB fragments, and succeeds in transmitting them properly, but when reclaiming these transmitted fragments, we will only update the count of free buffer descriptors by 1, even for SKBs with fragments. This leads to the networking stack thinking it has more room than the hardware has when pushing new SKBs, and backing off consequently because we return NETDEV_TX_BUSY. Fix this by accounting for the SKB nr_frags plus one (itself) and update ring->free_bds accordingly with that value for each iteration loop in __bcmgenet_tx_reclaim(). Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22dm9000: Return an ERR_PTR() in all error conditions of dm9000_parse_dt()Tobias Klauser1-1/+1
In one error condition dm9000_parse_dt() returns NULL, however the return value is checked using IS_ERR() in dm9000_probe(), leading to the error not being properly propagated if CONFIG_OF is not enabled or the device tree data is not available. Fix this by also returning an ERR_PTR() in this case. Fixes: 0b8bf1baabe5 (net: dm9000: Allow instantiation using device tree) Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22ath9k: Fix NULL pointer dereference on early irqWojciech Dubowik1-1/+1
The ah struct might not have been initialized when interrupt comes so check for it. Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-22r8169: fix an if conditionDan Carpenter1-1/+1
There is an extra semi-colon so __rtl8169_set_features() is called every time. Fixes: 929a031dfd62 ('r8169: adjust __rtl8169_set_features') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Hayes Wang <hayeswang@realtek.com>-- Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22r8152: disable ALDPShayeswang1-17/+45
If the hw is in ALDPS mode, the hw may have no response for accessing the most registers. Therefore, the ALDPS should be disabled before accessing the hw in rtl_ops.init(), rtl_ops.disable(), rtl_ops.up(), and rtl_ops.down(). Regardless of rtl_ops.enable(), because the hw wouldn't enter ALDPS mode when linking on. The hw would enter the ALDPS mode after several seconds when link down occurs and the ALDPS is enabled. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22tg3: Work around HW/FW limitations with vlan encapsulated framesVlad Yasevich1-2/+18
TG3 appears to have an issue performing TSO and checksum offloading correclty when the frame has been vlan encapsulated (non-accelrated). In these cases, tcp checksum is not correctly updated. This patch attempts to work around this issue. After the patch, 802.1ad vlans start working correctly over tg3 devices. CC: Prashant Sreedharan <prashant@broadcom.com> CC: Michael Chan <mchan@broadcom.com> Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22macvlan: allow to enqueue broadcast pkt on virtual deviceNicolas Dichtel1-1/+2
Since commit 412ca1550cbe ("macvlan: Move broadcasts into a work queue"), the driver uses tx_queue_len of the master device as the limit of packets enqueuing. Problem is that virtual drivers have this value set to 0, thus all broadcast packets were rejected. Because tx_queue_len was arbitrarily chosen, I replace it with a static limit of 1000 (also arbitrarily chosen). CC: Herbert Xu <herbert@gondor.apana.org.au> Reported-by: Thibaut Collet <thibaut.collet@6wind.com> Suggested-by: Thibaut Collet <thibaut.collet@6wind.com> Tested-by: Thibaut Collet <thibaut.collet@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22pch_gbe: 'select' NET_PTP_CLASSIFY.David S. Miller1-0/+1
Fixes the following randconfig build failure: > drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c: In function > ‘pch_ptp_match’: > drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c:130:2: error: > implicit declaration of function ‘ptp_classify_raw’ > [-Werror=implicit-function-declaration] > if (ptp_classify_raw(skb) == PTP_CLASS_NONE) > ^ > cc1: some warnings being treated as errors > make[5]: *** [drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.o] Error 1 Reported-by: Jim Davis <jim.epost@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22mlx4: Fix mlx4 reg/unreg mac to work properly with 0-mac addressesJack Morgenstein1-4/+7
There is a chance that the VF mlx4 RoCE driver (mlx4_ib) may see a 0-mac as the current default MAC address when a RoCE interface first comes up. In this case, the RoCE driver registers the 0-mac to get its MAC index -- used in the INIT2RTR transition when it creates its proxy Q1 qp's. If we do not allow QP1 to be created, the RoCE driver will not come up. If we do not register the 0-mac, but simply use a random mac-index, QP1 will attempt to send packets with an someone's else source MAC which will get the system into more troubled. Since a 0-mac was previously used to indicate a free slot, this leads to errors, both when the 0-mac is registered and when it is unregistered. The required fix is to check in addition that the slot containing the 0-mac has a reference count of zero. Additionally, when comparing MAC addresses, need to mask out the 2 MSBs of the u64 mac on both sides of the comparison. Note that when the EN driver (mlx4_en) comes up, it set itself a proper mac --> the RoCE driver gets to be notified on that and further handing is done with the update qp command, as was added by commit 9433c188915c ("IB/mlx4: Invoke UPDATE_QP for proxy QP1 on MAC changes"). Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-09-22mlx4: Correct error flows in rereg_mrMatan Barak1-11/+22
This patch addresses feedback from Sagi Grimberg on the rereg_mr implementation of mlx4. The following are fixed: 1. Set the correct pd_flags 2. Make sure we change the iova and size MR fields only after successful write and allocation of the MTTs. 3. Make the error checking more robust Fixes: e630664c8383 ("mlx4_core: Add helper functions to support MR re-registration") Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-09-19Merge tag 'linux-can-fixes-for-3.17-20140918' of ↵David S. Miller4-10/+51
git://gitorious.org/linux-can/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2014-09-18 this is a pull request of 8 patches for current net. A patch by Roger Quadros for the c_can driver fixes the swapped parameters of the c_can_hw_raminit_ti() function. Oliver Hartkopp adds the missing PCI ids to the peak_pci driver to support the single channel PCAN ExpressCard 34 adapter. David Dueck converts the at91_can driver to use proper clock handling functions. Then there are 5 patches by David Jander and me which fix several mailbox related problems in the flexcan driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19net: allow macvlans to move to net namespaceFrancesco Ruggeri1-0/+1
I cannot move a macvlan interface created on top of a bonding interface to a different namespace: % ip netns add dummy0 % ip link add link bond0 mac0 type macvlan % ip link set mac0 netns dummy0 RTNETLINK answers: Invalid argument % The problem seems to be that commit f9399814927a ("bonding: Don't allow bond devices to change network namespaces.") sets NETIF_F_NETNS_LOCAL on bonding interfaces, and commit 797f87f83b60 ("macvlan: fix netdev feature propagation from lower device") causes macvlan interfaces to inherit its features from the lower device. NETIF_F_NETNS_LOCAL should not be inherited from the lower device by a macvlan. Patch tested on 3.16. Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Acked-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19Merge tag 'master-2014-09-16' of ↵David S. Miller8-14/+49
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== pull request: wireless 2014-09-17 Please pull this batch of fixes intended for the 3.17 stream... Arend van Spriel sends a trio of minor brcmfmac fixes, including a fix for a Kconfig/build issue, a fix for a crash (null reference), and a regression fix related to event handling on a P2P interface. Hante Meuleman follows-up with a brcmfmac fix for a memory leak. Johannes Stezenbach brings an ath9k_htc fix for a regression related to hardware decryption offload. Marcel Holtmann delivers a one-liner to properly mark a device ID table in rfkill-gpio. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-193c59x: Fix bad offset spec in skb_frag_dma_mapNeil Horman1-1/+1
Recently aded the use of skb_frag_dma_map to 3c59x, but didn't realize it automatically included the frag_offset internally, as well as provided an option to specify an extra offset in the parameter list. We need to specify an offset of 0 in the parameter list to avoid skb corruption that results in lost connections. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Linux Kernel list <linux-kernel@vger.kernel.org> CC: "David S. Miller" <davem@davemloft.net> CC: Meelis Roos <mroos@linux.ee> Tested-by: Meelis Roos <mroos@linux.ee>
2014-09-193c59x: Add dma error checking and recoveryNeil Horman1-9/+41
Noted that 3c59x has no checks on transmit for failed DMA mappings, and no ability to unmap fragments when a single map fails in the middle of a transmit. This patch provides error checking to ensure that dma mappings work properly, and unrolls an skb mapping if a fragmented skb transmission has a mapping failure to prevent leaks. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Linux Kernel list <linux-kernel@vger.kernel.org> CC: "David S. Miller" <davem@davemloft.net> CC: Meelis Roos <mroos@linux.ee> Tested-by: Meelis Roos <mroos@linux.ee>
2014-09-18can: at91_can: add missing prepare and unprepare of the clockDavid Dueck1-3/+5
In order to make the driver work with the common clock framework, this patch converts the clk_enable()/clk_disable() to clk_prepare_enable()/clk_disable_unprepare(). While there, add the missing error handling. Signed-off-by: David Dueck <davidcdueck@googlemail.com> Signed-off-by: Anthony Harivel <anthony.harivel@emtrion.de> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2014-09-18can: flexcan: increase FLEXCAN_MCR_MAXMB() macro to 7 bitsMarc Kleine-Budde1-1/+1
This patch increases the mask in the FLEXCAN_MCR_MAXMB() to 7 bits as in the newer flexcan cores the MAXMB field is 7 bits wide. Reported-by: David Jander <david@protonic.nl> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2014-09-18can: flexcan: put TX mailbox into TX_INACTIVE mode after tx-completeMarc Kleine-Budde1-0/+3
After sending a RTR frame the TX mailbox becomes a RX_EMPTY mailbox. To avoid side effects when the RX-FIFO is full, this patch puts the TX mailbox into TX_INACTIVE mode in the transmission complete interrupt handler. This, of course, leaves a race window between the actual completion of the transmission and the handling of tx-complete interrupt. However this is the best we can do without busy polling the tx complete interrupt. Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2014-09-18can: flexcan: implement workaround for errata ERR005829David Jander1-1/+15
This patch implements the workaround mentioned in ERR005829: ERR005829: FlexCAN: FlexCAN does not transmit a message that is enabled to be transmitted in a specific moment during the arbitration process. Workaround: The workaround consists of two extra steps after setting up a message for transmission: Step 8: Reserve the first valid mailbox as an inactive mailbox (CODE=0b1000). If RX FIFO is disabled, this mailbox must be message buffer 0. Otherwise, the first valid mailbox can be found using the "RX FIFO filters" table in the FlexCAN chapter of the chip reference manual. Step 9: Write twice INACTIVE code (0b1000) into the first valid mailbox. Signed-off-by: David Jander <david@protonic.nl> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2014-09-18can: flexcan: correctly initialize mailboxesDavid Jander1-0/+7
Apparently mailboxes may contain random data at startup, causing some of them being prepared for message reception. This causes overruns being missed or even confusing the IRQ check for trasmitted messages, increasing the transmit counter instead of the error counter. This patch initializes all mailboxes after the FIFO as RX_INACTIVE. Signed-off-by: David Jander <david@protonic.nl> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2014-09-18can: flexcan: mark TX mailbox as TX_INACTIVEMarc Kleine-Budde1-2/+13
This patch fixes the initialization of the TX mailbox. It is now correctly initialized as TX_INACTIVE not RX_EMPTY. Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2014-09-18can: peak_pci: add PCI ID definition pcie card variantOliver Hartkopp1-1/+5
Add PCI ID definition for the single channel PCAN ExpressCard 34 adapter. Due to the subsystem id evaluation the correct number of channels (here 1) is created at initialization time. Tested including the LED functionality. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Acked-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2014-09-18can: c_can_platform: fix parameters of c_can_hw_raminit_ti()Roger Quadros1-2/+2
Pass the correct 'mask' and 'value' bits to c_can_hw_raminit_wait_ti(). They seem to have been swapped in the usage instances. Reported-by: Jay Schroeder <jay.schroeder@garmin.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>