ide: split away ide-internal.h

move lots of IDE defines to the new file.
also make a bunch of functions non-static
and add declaration for them.  Needed by
the following patches of this series.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

2 files changed, 566 insertions, 521 deletions

diff --git a/hw/ide-internal.h b/hw/ide-internal.h
new file mode 100644
index 0000000000..7fb8252c34
--- /dev/null
+++ b/hw/ide-internal.h
@@ -0,0 +1,534 @@
+#ifndef HW_IDE_INTERNAL_H
+#define HW_IDE_INTERNAL_H
+
+/*
+ * QEMU IDE Emulation -- internal header file
+ * only hw/ide*.c is supposed to include this file.
+ * non-internal declarations are in hw/ide.h
+ */
+
+/* debug IDE devices */
+//#define DEBUG_IDE
+//#define DEBUG_IDE_ATAPI
+//#define DEBUG_AIO
+#define USE_DMA_CDROM
+
+typedef struct IDEBus IDEBus;
+typedef struct IDEState IDEState;
+typedef struct BMDMAState BMDMAState;
+
+/* debug IDE devices */
+//#define DEBUG_IDE
+//#define DEBUG_IDE_ATAPI
+//#define DEBUG_AIO
+#define USE_DMA_CDROM
+
+/* Bits of HD_STATUS */
+#define ERR_STAT		0x01
+#define INDEX_STAT		0x02
+#define ECC_STAT		0x04	/* Corrected error */
+#define DRQ_STAT		0x08
+#define SEEK_STAT		0x10
+#define SRV_STAT		0x10
+#define WRERR_STAT		0x20
+#define READY_STAT		0x40
+#define BUSY_STAT		0x80
+
+/* Bits for HD_ERROR */
+#define MARK_ERR		0x01	/* Bad address mark */
+#define TRK0_ERR		0x02	/* couldn't find track 0 */
+#define ABRT_ERR		0x04	/* Command aborted */
+#define MCR_ERR			0x08	/* media change request */
+#define ID_ERR			0x10	/* ID field not found */
+#define MC_ERR			0x20	/* media changed */
+#define ECC_ERR			0x40	/* Uncorrectable ECC error */
+#define BBD_ERR			0x80	/* pre-EIDE meaning:  block marked bad */
+#define ICRC_ERR		0x80	/* new meaning:  CRC error during transfer */
+
+/* Bits of HD_NSECTOR */
+#define CD			0x01
+#define IO			0x02
+#define REL			0x04
+#define TAG_MASK		0xf8
+
+#define IDE_CMD_RESET           0x04
+#define IDE_CMD_DISABLE_IRQ     0x02
+
+/* ATA/ATAPI Commands pre T13 Spec */
+#define WIN_NOP				0x00
+/*
+ *	0x01->0x02 Reserved
+ */
+#define CFA_REQ_EXT_ERROR_CODE		0x03 /* CFA Request Extended Error Code */
+/*
+ *	0x04->0x07 Reserved
+ */
+#define WIN_SRST			0x08 /* ATAPI soft reset command */
+#define WIN_DEVICE_RESET		0x08
+/*
+ *	0x09->0x0F Reserved
+ */
+#define WIN_RECAL			0x10
+#define WIN_RESTORE			WIN_RECAL
+/*
+ *	0x10->0x1F Reserved
+ */
+#define WIN_READ			0x20 /* 28-Bit */
+#define WIN_READ_ONCE			0x21 /* 28-Bit without retries */
+#define WIN_READ_LONG			0x22 /* 28-Bit */
+#define WIN_READ_LONG_ONCE		0x23 /* 28-Bit without retries */
+#define WIN_READ_EXT			0x24 /* 48-Bit */
+#define WIN_READDMA_EXT			0x25 /* 48-Bit */
+#define WIN_READDMA_QUEUED_EXT		0x26 /* 48-Bit */
+#define WIN_READ_NATIVE_MAX_EXT		0x27 /* 48-Bit */
+/*
+ *	0x28
+ */
+#define WIN_MULTREAD_EXT		0x29 /* 48-Bit */
+/*
+ *	0x2A->0x2F Reserved
+ */
+#define WIN_WRITE			0x30 /* 28-Bit */
+#define WIN_WRITE_ONCE			0x31 /* 28-Bit without retries */
+#define WIN_WRITE_LONG			0x32 /* 28-Bit */
+#define WIN_WRITE_LONG_ONCE		0x33 /* 28-Bit without retries */
+#define WIN_WRITE_EXT			0x34 /* 48-Bit */
+#define WIN_WRITEDMA_EXT		0x35 /* 48-Bit */
+#define WIN_WRITEDMA_QUEUED_EXT		0x36 /* 48-Bit */
+#define WIN_SET_MAX_EXT			0x37 /* 48-Bit */
+#define CFA_WRITE_SECT_WO_ERASE		0x38 /* CFA Write Sectors without erase */
+#define WIN_MULTWRITE_EXT		0x39 /* 48-Bit */
+/*
+ *	0x3A->0x3B Reserved
+ */
+#define WIN_WRITE_VERIFY		0x3C /* 28-Bit */
+/*
+ *	0x3D->0x3F Reserved
+ */
+#define WIN_VERIFY			0x40 /* 28-Bit - Read Verify Sectors */
+#define WIN_VERIFY_ONCE			0x41 /* 28-Bit - without retries */
+#define WIN_VERIFY_EXT			0x42 /* 48-Bit */
+/*
+ *	0x43->0x4F Reserved
+ */
+#define WIN_FORMAT			0x50
+/*
+ *	0x51->0x5F Reserved
+ */
+#define WIN_INIT			0x60
+/*
+ *	0x61->0x5F Reserved
+ */
+#define WIN_SEEK			0x70 /* 0x70-0x7F Reserved */
+#define CFA_TRANSLATE_SECTOR		0x87 /* CFA Translate Sector */
+#define WIN_DIAGNOSE			0x90
+#define WIN_SPECIFY			0x91 /* set drive geometry translation */
+#define WIN_DOWNLOAD_MICROCODE		0x92
+#define WIN_STANDBYNOW2			0x94
+#define CFA_IDLEIMMEDIATE		0x95 /* force drive to become "ready" */
+#define WIN_STANDBY2			0x96
+#define WIN_SETIDLE2			0x97
+#define WIN_CHECKPOWERMODE2		0x98
+#define WIN_SLEEPNOW2			0x99
+/*
+ *	0x9A VENDOR
+ */
+#define WIN_PACKETCMD			0xA0 /* Send a packet command. */
+#define WIN_PIDENTIFY			0xA1 /* identify ATAPI device	*/
+#define WIN_QUEUED_SERVICE		0xA2
+#define WIN_SMART			0xB0 /* self-monitoring and reporting */
+#define CFA_ACCESS_METADATA_STORAGE	0xB8
+#define CFA_ERASE_SECTORS       	0xC0 /* microdrives implement as NOP */
+#define WIN_MULTREAD			0xC4 /* read sectors using multiple mode*/
+#define WIN_MULTWRITE			0xC5 /* write sectors using multiple mode */
+#define WIN_SETMULT			0xC6 /* enable/disable multiple mode */
+#define WIN_READDMA_QUEUED		0xC7 /* read sectors using Queued DMA transfers */
+#define WIN_READDMA			0xC8 /* read sectors using DMA transfers */
+#define WIN_READDMA_ONCE		0xC9 /* 28-Bit - without retries */
+#define WIN_WRITEDMA			0xCA /* write sectors using DMA transfers */
+#define WIN_WRITEDMA_ONCE		0xCB /* 28-Bit - without retries */
+#define WIN_WRITEDMA_QUEUED		0xCC /* write sectors using Queued DMA transfers */
+#define CFA_WRITE_MULTI_WO_ERASE	0xCD /* CFA Write multiple without erase */
+#define WIN_GETMEDIASTATUS		0xDA
+#define WIN_ACKMEDIACHANGE		0xDB /* ATA-1, ATA-2 vendor */
+#define WIN_POSTBOOT			0xDC
+#define WIN_PREBOOT			0xDD
+#define WIN_DOORLOCK			0xDE /* lock door on removable drives */
+#define WIN_DOORUNLOCK			0xDF /* unlock door on removable drives */
+#define WIN_STANDBYNOW1			0xE0
+#define WIN_IDLEIMMEDIATE		0xE1 /* force drive to become "ready" */
+#define WIN_STANDBY             	0xE2 /* Set device in Standby Mode */
+#define WIN_SETIDLE1			0xE3
+#define WIN_READ_BUFFER			0xE4 /* force read only 1 sector */
+#define WIN_CHECKPOWERMODE1		0xE5
+#define WIN_SLEEPNOW1			0xE6
+#define WIN_FLUSH_CACHE			0xE7
+#define WIN_WRITE_BUFFER		0xE8 /* force write only 1 sector */
+#define WIN_WRITE_SAME			0xE9 /* read ata-2 to use */
+	/* SET_FEATURES 0x22 or 0xDD */
+#define WIN_FLUSH_CACHE_EXT		0xEA /* 48-Bit */
+#define WIN_IDENTIFY			0xEC /* ask drive to identify itself	*/
+#define WIN_MEDIAEJECT			0xED
+#define WIN_IDENTIFY_DMA		0xEE /* same as WIN_IDENTIFY, but DMA */
+#define WIN_SETFEATURES			0xEF /* set special drive features */
+#define EXABYTE_ENABLE_NEST		0xF0
+#define IBM_SENSE_CONDITION		0xF0 /* measure disk temperature */
+#define WIN_SECURITY_SET_PASS		0xF1
+#define WIN_SECURITY_UNLOCK		0xF2
+#define WIN_SECURITY_ERASE_PREPARE	0xF3
+#define WIN_SECURITY_ERASE_UNIT		0xF4
+#define WIN_SECURITY_FREEZE_LOCK	0xF5
+#define CFA_WEAR_LEVEL			0xF5 /* microdrives implement as NOP */
+#define WIN_SECURITY_DISABLE		0xF6
+#define WIN_READ_NATIVE_MAX		0xF8 /* return the native maximum address */
+#define WIN_SET_MAX			0xF9
+#define DISABLE_SEAGATE			0xFB
+
+/* set to 1 set disable mult support */
+#define MAX_MULT_SECTORS 16
+
+#define IDE_DMA_BUF_SECTORS 256
+
+#if (IDE_DMA_BUF_SECTORS < MAX_MULT_SECTORS)
+#error "IDE_DMA_BUF_SECTORS must be bigger or equal to MAX_MULT_SECTORS"
+#endif
+
+/* ATAPI defines */
+
+#define ATAPI_PACKET_SIZE 12
+
+/* The generic packet command opcodes for CD/DVD Logical Units,
+ * From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
+#define GPCMD_BLANK			    0xa1
+#define GPCMD_CLOSE_TRACK		    0x5b
+#define GPCMD_FLUSH_CACHE		    0x35
+#define GPCMD_FORMAT_UNIT		    0x04
+#define GPCMD_GET_CONFIGURATION		    0x46
+#define GPCMD_GET_EVENT_STATUS_NOTIFICATION 0x4a
+#define GPCMD_GET_PERFORMANCE		    0xac
+#define GPCMD_INQUIRY			    0x12
+#define GPCMD_LOAD_UNLOAD		    0xa6
+#define GPCMD_MECHANISM_STATUS		    0xbd
+#define GPCMD_MODE_SELECT_10		    0x55
+#define GPCMD_MODE_SENSE_10		    0x5a
+#define GPCMD_PAUSE_RESUME		    0x4b
+#define GPCMD_PLAY_AUDIO_10		    0x45
+#define GPCMD_PLAY_AUDIO_MSF		    0x47
+#define GPCMD_PLAY_AUDIO_TI		    0x48
+#define GPCMD_PLAY_CD			    0xbc
+#define GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL  0x1e
+#define GPCMD_READ_10			    0x28
+#define GPCMD_READ_12			    0xa8
+#define GPCMD_READ_CDVD_CAPACITY	    0x25
+#define GPCMD_READ_CD			    0xbe
+#define GPCMD_READ_CD_MSF		    0xb9
+#define GPCMD_READ_DISC_INFO		    0x51
+#define GPCMD_READ_DVD_STRUCTURE	    0xad
+#define GPCMD_READ_FORMAT_CAPACITIES	    0x23
+#define GPCMD_READ_HEADER		    0x44
+#define GPCMD_READ_TRACK_RZONE_INFO	    0x52
+#define GPCMD_READ_SUBCHANNEL		    0x42
+#define GPCMD_READ_TOC_PMA_ATIP		    0x43
+#define GPCMD_REPAIR_RZONE_TRACK	    0x58
+#define GPCMD_REPORT_KEY		    0xa4
+#define GPCMD_REQUEST_SENSE		    0x03
+#define GPCMD_RESERVE_RZONE_TRACK	    0x53
+#define GPCMD_SCAN			    0xba
+#define GPCMD_SEEK			    0x2b
+#define GPCMD_SEND_DVD_STRUCTURE	    0xad
+#define GPCMD_SEND_EVENT		    0xa2
+#define GPCMD_SEND_KEY			    0xa3
+#define GPCMD_SEND_OPC			    0x54
+#define GPCMD_SET_READ_AHEAD		    0xa7
+#define GPCMD_SET_STREAMING		    0xb6
+#define GPCMD_START_STOP_UNIT		    0x1b
+#define GPCMD_STOP_PLAY_SCAN		    0x4e
+#define GPCMD_TEST_UNIT_READY		    0x00
+#define GPCMD_VERIFY_10			    0x2f
+#define GPCMD_WRITE_10			    0x2a
+#define GPCMD_WRITE_AND_VERIFY_10	    0x2e
+/* This is listed as optional in ATAPI 2.6, but is (curiously)
+ * missing from Mt. Fuji, Table 57.  It _is_ mentioned in Mt. Fuji
+ * Table 377 as an MMC command for SCSi devices though...  Most ATAPI
+ * drives support it. */
+#define GPCMD_SET_SPEED			    0xbb
+/* This seems to be a SCSI specific CD-ROM opcode
+ * to play data at track/index */
+#define GPCMD_PLAYAUDIO_TI		    0x48
+/*
+ * From MS Media Status Notification Support Specification. For
+ * older drives only.
+ */
+#define GPCMD_GET_MEDIA_STATUS		    0xda
+#define GPCMD_MODE_SENSE_6		    0x1a
+
+/* Mode page codes for mode sense/set */
+#define GPMODE_R_W_ERROR_PAGE		0x01
+#define GPMODE_WRITE_PARMS_PAGE		0x05
+#define GPMODE_AUDIO_CTL_PAGE		0x0e
+#define GPMODE_POWER_PAGE		0x1a
+#define GPMODE_FAULT_FAIL_PAGE		0x1c
+#define GPMODE_TO_PROTECT_PAGE		0x1d
+#define GPMODE_CAPABILITIES_PAGE	0x2a
+#define GPMODE_ALL_PAGES		0x3f
+/* Not in Mt. Fuji, but in ATAPI 2.6 -- depricated now in favor
+ * of MODE_SENSE_POWER_PAGE */
+#define GPMODE_CDROM_PAGE		0x0d
+
+/*
+ * Based on values from <linux/cdrom.h> but extending CD_MINS
+ * to the maximum common size allowed by the Orange's Book ATIP
+ *
+ * 90 and 99 min CDs are also available but using them as the
+ * upper limit reduces the effectiveness of the heuristic to
+ * detect DVDs burned to less than 25% of their maximum capacity
+ */
+
+/* Some generally useful CD-ROM information */
+#define CD_MINS                       80 /* max. minutes per CD */
+#define CD_SECS                       60 /* seconds per minute */
+#define CD_FRAMES                     75 /* frames per second */
+#define CD_FRAMESIZE                2048 /* bytes per frame, "cooked" mode */
+#define CD_MAX_BYTES       (CD_MINS * CD_SECS * CD_FRAMES * CD_FRAMESIZE)
+#define CD_MAX_SECTORS     (CD_MAX_BYTES / 512)
+
+/*
+ * The MMC values are not IDE specific and might need to be moved
+ * to a common header if they are also needed for the SCSI emulation
+ */
+
+/* Profile list from MMC-6 revision 1 table 91 */
+#define MMC_PROFILE_NONE                0x0000
+#define MMC_PROFILE_CD_ROM              0x0008
+#define MMC_PROFILE_CD_R                0x0009
+#define MMC_PROFILE_CD_RW               0x000A
+#define MMC_PROFILE_DVD_ROM             0x0010
+#define MMC_PROFILE_DVD_R_SR            0x0011
+#define MMC_PROFILE_DVD_RAM             0x0012
+#define MMC_PROFILE_DVD_RW_RO           0x0013
+#define MMC_PROFILE_DVD_RW_SR           0x0014
+#define MMC_PROFILE_DVD_R_DL_SR         0x0015
+#define MMC_PROFILE_DVD_R_DL_JR         0x0016
+#define MMC_PROFILE_DVD_RW_DL           0x0017
+#define MMC_PROFILE_DVD_DDR             0x0018
+#define MMC_PROFILE_DVD_PLUS_RW         0x001A
+#define MMC_PROFILE_DVD_PLUS_R          0x001B
+#define MMC_PROFILE_DVD_PLUS_RW_DL      0x002A
+#define MMC_PROFILE_DVD_PLUS_R_DL       0x002B
+#define MMC_PROFILE_BD_ROM              0x0040
+#define MMC_PROFILE_BD_R_SRM            0x0041
+#define MMC_PROFILE_BD_R_RRM            0x0042
+#define MMC_PROFILE_BD_RE               0x0043
+#define MMC_PROFILE_HDDVD_ROM           0x0050
+#define MMC_PROFILE_HDDVD_R             0x0051
+#define MMC_PROFILE_HDDVD_RAM           0x0052
+#define MMC_PROFILE_HDDVD_RW            0x0053
+#define MMC_PROFILE_HDDVD_R_DL          0x0058
+#define MMC_PROFILE_HDDVD_RW_DL         0x005A
+#define MMC_PROFILE_INVALID             0xFFFF
+
+#define ATAPI_INT_REASON_CD             0x01 /* 0 = data transfer */
+#define ATAPI_INT_REASON_IO             0x02 /* 1 = transfer to the host */
+#define ATAPI_INT_REASON_REL            0x04
+#define ATAPI_INT_REASON_TAG            0xf8
+
+/* same constants as bochs */
+#define ASC_ILLEGAL_OPCODE                   0x20
+#define ASC_LOGICAL_BLOCK_OOR                0x21
+#define ASC_INV_FIELD_IN_CMD_PACKET          0x24
+#define ASC_MEDIUM_MAY_HAVE_CHANGED          0x28
+#define ASC_INCOMPATIBLE_FORMAT              0x30
+#define ASC_MEDIUM_NOT_PRESENT               0x3a
+#define ASC_SAVING_PARAMETERS_NOT_SUPPORTED  0x39
+#define ASC_MEDIA_REMOVAL_PREVENTED          0x53
+
+#define CFA_NO_ERROR            0x00
+#define CFA_MISC_ERROR          0x09
+#define CFA_INVALID_COMMAND     0x20
+#define CFA_INVALID_ADDRESS     0x21
+#define CFA_ADDRESS_OVERFLOW    0x2f
+
+#define SENSE_NONE            0
+#define SENSE_NOT_READY       2
+#define SENSE_ILLEGAL_REQUEST 5
+#define SENSE_UNIT_ATTENTION  6
+
+#define SMART_READ_DATA       0xd0
+#define SMART_READ_THRESH     0xd1
+#define SMART_ATTR_AUTOSAVE   0xd2
+#define SMART_SAVE_ATTR       0xd3
+#define SMART_EXECUTE_OFFLINE 0xd4
+#define SMART_READ_LOG        0xd5
+#define SMART_WRITE_LOG       0xd6
+#define SMART_ENABLE          0xd8
+#define SMART_DISABLE         0xd9
+#define SMART_STATUS          0xda
+
+typedef void EndTransferFunc(IDEState *);
+
+/* NOTE: IDEState represents in fact one drive */
+struct IDEState {
+    IDEBus *bus;
+    uint8_t unit;
+    /* ide config */
+    int is_cdrom;
+    int is_cf;
+    int cylinders, heads, sectors;
+    int64_t nb_sectors;
+    int mult_sectors;
+    int identify_set;
+    uint16_t identify_data[256];
+    qemu_irq irq;
+    int drive_serial;
+    char drive_serial_str[21];
+    /* ide regs */
+    uint8_t feature;
+    uint8_t error;
+    uint32_t nsector;
+    uint8_t sector;
+    uint8_t lcyl;
+    uint8_t hcyl;
+    /* other part of tf for lba48 support */
+    uint8_t hob_feature;
+    uint8_t hob_nsector;
+    uint8_t hob_sector;
+    uint8_t hob_lcyl;
+    uint8_t hob_hcyl;
+
+    uint8_t select;
+    uint8_t status;
+
+    /* 0x3f6 command, only meaningful for drive 0 */
+    uint8_t cmd;
+    /* set for lba48 access */
+    uint8_t lba48;
+    BlockDriverState *bs;
+    /* ATAPI specific */
+    uint8_t sense_key;
+    uint8_t asc;
+    uint8_t cdrom_changed;
+    int packet_transfer_size;
+    int elementary_transfer_size;
+    int io_buffer_index;
+    int lba;
+    int cd_sector_size;
+    int atapi_dma; /* true if dma is requested for the packet cmd */
+    /* ATA DMA state */
+    int io_buffer_size;
+    QEMUSGList sg;
+    /* PIO transfer handling */
+    int req_nb_sectors; /* number of sectors per interrupt */
+    EndTransferFunc *end_transfer_func;
+    uint8_t *data_ptr;
+    uint8_t *data_end;
+    uint8_t *io_buffer;
+    QEMUTimer *sector_write_timer; /* only used for win2k install hack */
+    uint32_t irq_count; /* counts IRQs when using win2k install hack */
+    /* CF-ATA extended error */
+    uint8_t ext_error;
+    /* CF-ATA metadata storage */
+    uint32_t mdata_size;
+    uint8_t *mdata_storage;
+    int media_changed;
+    /* for pmac */
+    int is_read;
+    /* SMART */
+    uint8_t smart_enabled;
+    uint8_t smart_autosave;
+    int smart_errors;
+    uint8_t smart_selftest_count;
+    uint8_t *smart_selftest_data;
+};
+
+struct IDEBus {
+    BusState qbus;
+    BMDMAState *bmdma;
+    IDEState ifs[2];
+    uint8_t unit;
+};
+
+#define BM_STATUS_DMAING 0x01
+#define BM_STATUS_ERROR  0x02
+#define BM_STATUS_INT    0x04
+#define BM_STATUS_DMA_RETRY  0x08
+#define BM_STATUS_PIO_RETRY  0x10
+
+#define BM_CMD_START     0x01
+#define BM_CMD_READ      0x08
+
+struct BMDMAState {
+    uint8_t cmd;
+    uint8_t status;
+    uint32_t addr;
+
+    struct PCIIDEState *pci_dev;
+    IDEBus *bus;
+    /* current transfer state */
+    uint32_t cur_addr;
+    uint32_t cur_prd_last;
+    uint32_t cur_prd_addr;
+    uint32_t cur_prd_len;
+    uint8_t unit;
+    BlockDriverCompletionFunc *dma_cb;
+    BlockDriverAIOCB *aiocb;
+    struct iovec iov;
+    QEMUIOVector qiov;
+    int64_t sector_num;
+    uint32_t nsector;
+    QEMUBH *bh;
+};
+
+static inline IDEState *idebus_active_if(IDEBus *bus)
+{
+    return bus->ifs + bus->unit;
+}
+
+static inline IDEState *bmdma_active_if(BMDMAState *bmdma)
+{
+    assert(bmdma->unit != -1);
+    return bmdma->bus->ifs + bmdma->unit;
+}
+
+static inline void ide_set_irq(IDEState *s)
+{
+    BMDMAState *bm = s->bus->bmdma;
+    if (!(s->cmd & IDE_CMD_DISABLE_IRQ)) {
+        if (bm) {
+            bm->status |= BM_STATUS_INT;
+        }
+        qemu_irq_raise(s->irq);
+    }
+}
+
+/* ide.c */
+void ide_save(QEMUFile* f, IDEState *s);
+void ide_load(QEMUFile* f, IDEState *s, int version_id);
+void idebus_save(QEMUFile* f, IDEBus *bus);
+void idebus_load(QEMUFile* f, IDEBus *bus, int version_id);
+
+void ide_reset(IDEState *s);
+int64_t ide_get_sector(IDEState *s);
+void ide_set_sector(IDEState *s, int64_t sector_num);
+
+void ide_dma_cancel(BMDMAState *bm);
+void ide_dma_restart_cb(void *opaque, int running, int reason);
+void ide_dma_error(IDEState *s);
+
+void ide_atapi_cmd_ok(IDEState *s);
+void ide_atapi_cmd_error(IDEState *s, int sense_key, int asc);
+void ide_atapi_io_error(IDEState *s, int ret);
+
+void ide_ioport_write(void *opaque, uint32_t addr, uint32_t val);
+uint32_t ide_ioport_read(void *opaque, uint32_t addr1);
+uint32_t ide_status_read(void *opaque, uint32_t addr);
+void ide_cmd_write(void *opaque, uint32_t addr, uint32_t val);
+void ide_data_writew(void *opaque, uint32_t addr, uint32_t val);
+uint32_t ide_data_readw(void *opaque, uint32_t addr);
+void ide_data_writel(void *opaque, uint32_t addr, uint32_t val);
+uint32_t ide_data_readl(void *opaque, uint32_t addr);
+
+void ide_init2(IDEBus *bus, BlockDriverState *hd0, BlockDriverState *hd1,
+               qemu_irq irq);
+void ide_init_ioport(IDEBus *bus, int iobase, int iobase2);
+
+#endif /* HW_IDE_INTERNAL_H */
diff --git a/hw/ide.c b/hw/ide.c
index 8d2c51d781..654d78bd7d 100644
--- a/hw/ide.c
+++ b/hw/ide.c
@@ -35,357 +35,7 @@
 #include "mac_dbdma.h"
 #include "sh.h"
 #include "dma.h"
-
-typedef struct IDEBus IDEBus;
-typedef struct IDEState IDEState;
-typedef struct BMDMAState BMDMAState;
-
-/* debug IDE devices */
-//#define DEBUG_IDE
-//#define DEBUG_IDE_ATAPI
-//#define DEBUG_AIO
-#define USE_DMA_CDROM
-
-/* Bits of HD_STATUS */
-#define ERR_STAT		0x01
-#define INDEX_STAT		0x02
-#define ECC_STAT		0x04	/* Corrected error */
-#define DRQ_STAT		0x08
-#define SEEK_STAT		0x10
-#define SRV_STAT		0x10
-#define WRERR_STAT		0x20
-#define READY_STAT		0x40
-#define BUSY_STAT		0x80
-
-/* Bits for HD_ERROR */
-#define MARK_ERR		0x01	/* Bad address mark */
-#define TRK0_ERR		0x02	/* couldn't find track 0 */
-#define ABRT_ERR		0x04	/* Command aborted */
-#define MCR_ERR			0x08	/* media change request */
-#define ID_ERR			0x10	/* ID field not found */
-#define MC_ERR			0x20	/* media changed */
-#define ECC_ERR			0x40	/* Uncorrectable ECC error */
-#define BBD_ERR			0x80	/* pre-EIDE meaning:  block marked bad */
-#define ICRC_ERR		0x80	/* new meaning:  CRC error during transfer */
-
-/* Bits of HD_NSECTOR */
-#define CD			0x01
-#define IO			0x02
-#define REL			0x04
-#define TAG_MASK		0xf8
-
-#define IDE_CMD_RESET           0x04
-#define IDE_CMD_DISABLE_IRQ     0x02
-
-/* ATA/ATAPI Commands pre T13 Spec */
-#define WIN_NOP				0x00
-/*
- *	0x01->0x02 Reserved
- */
-#define CFA_REQ_EXT_ERROR_CODE		0x03 /* CFA Request Extended Error Code */
-/*
- *	0x04->0x07 Reserved
- */
-#define WIN_SRST			0x08 /* ATAPI soft reset command */
-#define WIN_DEVICE_RESET		0x08
-/*
- *	0x09->0x0F Reserved
- */
-#define WIN_RECAL			0x10
-#define WIN_RESTORE			WIN_RECAL
-/*
- *	0x10->0x1F Reserved
- */
-#define WIN_READ			0x20 /* 28-Bit */
-#define WIN_READ_ONCE			0x21 /* 28-Bit without retries */
-#define WIN_READ_LONG			0x22 /* 28-Bit */
-#define WIN_READ_LONG_ONCE		0x23 /* 28-Bit without retries */
-#define WIN_READ_EXT			0x24 /* 48-Bit */
-#define WIN_READDMA_EXT			0x25 /* 48-Bit */
-#define WIN_READDMA_QUEUED_EXT		0x26 /* 48-Bit */
-#define WIN_READ_NATIVE_MAX_EXT		0x27 /* 48-Bit */
-/*
- *	0x28
- */
-#define WIN_MULTREAD_EXT		0x29 /* 48-Bit */
-/*
- *	0x2A->0x2F Reserved
- */
-#define WIN_WRITE			0x30 /* 28-Bit */
-#define WIN_WRITE_ONCE			0x31 /* 28-Bit without retries */
-#define WIN_WRITE_LONG			0x32 /* 28-Bit */
-#define WIN_WRITE_LONG_ONCE		0x33 /* 28-Bit without retries */
-#define WIN_WRITE_EXT			0x34 /* 48-Bit */
-#define WIN_WRITEDMA_EXT		0x35 /* 48-Bit */
-#define WIN_WRITEDMA_QUEUED_EXT		0x36 /* 48-Bit */
-#define WIN_SET_MAX_EXT			0x37 /* 48-Bit */
-#define CFA_WRITE_SECT_WO_ERASE		0x38 /* CFA Write Sectors without erase */
-#define WIN_MULTWRITE_EXT		0x39 /* 48-Bit */
-/*
- *	0x3A->0x3B Reserved
- */
-#define WIN_WRITE_VERIFY		0x3C /* 28-Bit */
-/*
- *	0x3D->0x3F Reserved
- */
-#define WIN_VERIFY			0x40 /* 28-Bit - Read Verify Sectors */
-#define WIN_VERIFY_ONCE			0x41 /* 28-Bit - without retries */
-#define WIN_VERIFY_EXT			0x42 /* 48-Bit */
-/*
- *	0x43->0x4F Reserved
- */
-#define WIN_FORMAT			0x50
-/*
- *	0x51->0x5F Reserved
- */
-#define WIN_INIT			0x60
-/*
- *	0x61->0x5F Reserved
- */
-#define WIN_SEEK			0x70 /* 0x70-0x7F Reserved */
-#define CFA_TRANSLATE_SECTOR		0x87 /* CFA Translate Sector */
-#define WIN_DIAGNOSE			0x90
-#define WIN_SPECIFY			0x91 /* set drive geometry translation */
-#define WIN_DOWNLOAD_MICROCODE		0x92
-#define WIN_STANDBYNOW2			0x94
-#define CFA_IDLEIMMEDIATE		0x95 /* force drive to become "ready" */
-#define WIN_STANDBY2			0x96
-#define WIN_SETIDLE2			0x97
-#define WIN_CHECKPOWERMODE2		0x98
-#define WIN_SLEEPNOW2			0x99
-/*
- *	0x9A VENDOR
- */
-#define WIN_PACKETCMD			0xA0 /* Send a packet command. */
-#define WIN_PIDENTIFY			0xA1 /* identify ATAPI device	*/
-#define WIN_QUEUED_SERVICE		0xA2
-#define WIN_SMART			0xB0 /* self-monitoring and reporting */
-#define CFA_ACCESS_METADATA_STORAGE	0xB8
-#define CFA_ERASE_SECTORS       	0xC0 /* microdrives implement as NOP */
-#define WIN_MULTREAD			0xC4 /* read sectors using multiple mode*/
-#define WIN_MULTWRITE			0xC5 /* write sectors using multiple mode */
-#define WIN_SETMULT			0xC6 /* enable/disable multiple mode */
-#define WIN_READDMA_QUEUED		0xC7 /* read sectors using Queued DMA transfers */
-#define WIN_READDMA			0xC8 /* read sectors using DMA transfers */
-#define WIN_READDMA_ONCE		0xC9 /* 28-Bit - without retries */
-#define WIN_WRITEDMA			0xCA /* write sectors using DMA transfers */
-#define WIN_WRITEDMA_ONCE		0xCB /* 28-Bit - without retries */
-#define WIN_WRITEDMA_QUEUED		0xCC /* write sectors using Queued DMA transfers */
-#define CFA_WRITE_MULTI_WO_ERASE	0xCD /* CFA Write multiple without erase */
-#define WIN_GETMEDIASTATUS		0xDA
-#define WIN_ACKMEDIACHANGE		0xDB /* ATA-1, ATA-2 vendor */
-#define WIN_POSTBOOT			0xDC
-#define WIN_PREBOOT			0xDD
-#define WIN_DOORLOCK			0xDE /* lock door on removable drives */
-#define WIN_DOORUNLOCK			0xDF /* unlock door on removable drives */
-#define WIN_STANDBYNOW1			0xE0
-#define WIN_IDLEIMMEDIATE		0xE1 /* force drive to become "ready" */
-#define WIN_STANDBY             	0xE2 /* Set device in Standby Mode */
-#define WIN_SETIDLE1			0xE3
-#define WIN_READ_BUFFER			0xE4 /* force read only 1 sector */
-#define WIN_CHECKPOWERMODE1		0xE5
-#define WIN_SLEEPNOW1			0xE6
-#define WIN_FLUSH_CACHE			0xE7
-#define WIN_WRITE_BUFFER		0xE8 /* force write only 1 sector */
-#define WIN_WRITE_SAME			0xE9 /* read ata-2 to use */
-	/* SET_FEATURES 0x22 or 0xDD */
-#define WIN_FLUSH_CACHE_EXT		0xEA /* 48-Bit */
-#define WIN_IDENTIFY			0xEC /* ask drive to identify itself	*/
-#define WIN_MEDIAEJECT			0xED
-#define WIN_IDENTIFY_DMA		0xEE /* same as WIN_IDENTIFY, but DMA */
-#define WIN_SETFEATURES			0xEF /* set special drive features */
-#define EXABYTE_ENABLE_NEST		0xF0
-#define IBM_SENSE_CONDITION		0xF0 /* measure disk temperature */
-#define WIN_SECURITY_SET_PASS		0xF1
-#define WIN_SECURITY_UNLOCK		0xF2
-#define WIN_SECURITY_ERASE_PREPARE	0xF3
-#define WIN_SECURITY_ERASE_UNIT		0xF4
-#define WIN_SECURITY_FREEZE_LOCK	0xF5
-#define CFA_WEAR_LEVEL			0xF5 /* microdrives implement as NOP */
-#define WIN_SECURITY_DISABLE		0xF6
-#define WIN_READ_NATIVE_MAX		0xF8 /* return the native maximum address */
-#define WIN_SET_MAX			0xF9
-#define DISABLE_SEAGATE			0xFB
-
-/* set to 1 set disable mult support */
-#define MAX_MULT_SECTORS 16
-
-#define IDE_DMA_BUF_SECTORS 256
-
-#if (IDE_DMA_BUF_SECTORS < MAX_MULT_SECTORS)
-#error "IDE_DMA_BUF_SECTORS must be bigger or equal to MAX_MULT_SECTORS"
-#endif
-
-/* ATAPI defines */
-
-#define ATAPI_PACKET_SIZE 12
-
-/* The generic packet command opcodes for CD/DVD Logical Units,
- * From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
-#define GPCMD_BLANK			    0xa1
-#define GPCMD_CLOSE_TRACK		    0x5b
-#define GPCMD_FLUSH_CACHE		    0x35
-#define GPCMD_FORMAT_UNIT		    0x04
-#define GPCMD_GET_CONFIGURATION		    0x46
-#define GPCMD_GET_EVENT_STATUS_NOTIFICATION 0x4a
-#define GPCMD_GET_PERFORMANCE		    0xac
-#define GPCMD_INQUIRY			    0x12
-#define GPCMD_LOAD_UNLOAD		    0xa6
-#define GPCMD_MECHANISM_STATUS		    0xbd
-#define GPCMD_MODE_SELECT_10		    0x55
-#define GPCMD_MODE_SENSE_10		    0x5a
-#define GPCMD_PAUSE_RESUME		    0x4b
-#define GPCMD_PLAY_AUDIO_10		    0x45
-#define GPCMD_PLAY_AUDIO_MSF		    0x47
-#define GPCMD_PLAY_AUDIO_TI		    0x48
-#define GPCMD_PLAY_CD			    0xbc
-#define GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL  0x1e
-#define GPCMD_READ_10			    0x28
-#define GPCMD_READ_12			    0xa8
-#define GPCMD_READ_CDVD_CAPACITY	    0x25
-#define GPCMD_READ_CD			    0xbe
-#define GPCMD_READ_CD_MSF		    0xb9
-#define GPCMD_READ_DISC_INFO		    0x51
-#define GPCMD_READ_DVD_STRUCTURE	    0xad
-#define GPCMD_READ_FORMAT_CAPACITIES	    0x23
-#define GPCMD_READ_HEADER		    0x44
-#define GPCMD_READ_TRACK_RZONE_INFO	    0x52
-#define GPCMD_READ_SUBCHANNEL		    0x42
-#define GPCMD_READ_TOC_PMA_ATIP		    0x43
-#define GPCMD_REPAIR_RZONE_TRACK	    0x58
-#define GPCMD_REPORT_KEY		    0xa4
-#define GPCMD_REQUEST_SENSE		    0x03
-#define GPCMD_RESERVE_RZONE_TRACK	    0x53
-#define GPCMD_SCAN			    0xba
-#define GPCMD_SEEK			    0x2b
-#define GPCMD_SEND_DVD_STRUCTURE	    0xad
-#define GPCMD_SEND_EVENT		    0xa2
-#define GPCMD_SEND_KEY			    0xa3
-#define GPCMD_SEND_OPC			    0x54
-#define GPCMD_SET_READ_AHEAD		    0xa7
-#define GPCMD_SET_STREAMING		    0xb6
-#define GPCMD_START_STOP_UNIT		    0x1b
-#define GPCMD_STOP_PLAY_SCAN		    0x4e
-#define GPCMD_TEST_UNIT_READY		    0x00
-#define GPCMD_VERIFY_10			    0x2f
-#define GPCMD_WRITE_10			    0x2a
-#define GPCMD_WRITE_AND_VERIFY_10	    0x2e
-/* This is listed as optional in ATAPI 2.6, but is (curiously)
- * missing from Mt. Fuji, Table 57.  It _is_ mentioned in Mt. Fuji
- * Table 377 as an MMC command for SCSi devices though...  Most ATAPI
- * drives support it. */
-#define GPCMD_SET_SPEED			    0xbb
-/* This seems to be a SCSI specific CD-ROM opcode
- * to play data at track/index */
-#define GPCMD_PLAYAUDIO_TI		    0x48
-/*
- * From MS Media Status Notification Support Specification. For
- * older drives only.
- */
-#define GPCMD_GET_MEDIA_STATUS		    0xda
-#define GPCMD_MODE_SENSE_6		    0x1a
-
-/* Mode page codes for mode sense/set */
-#define GPMODE_R_W_ERROR_PAGE		0x01
-#define GPMODE_WRITE_PARMS_PAGE		0x05
-#define GPMODE_AUDIO_CTL_PAGE		0x0e
-#define GPMODE_POWER_PAGE		0x1a
-#define GPMODE_FAULT_FAIL_PAGE		0x1c
-#define GPMODE_TO_PROTECT_PAGE		0x1d
-#define GPMODE_CAPABILITIES_PAGE	0x2a
-#define GPMODE_ALL_PAGES		0x3f
-/* Not in Mt. Fuji, but in ATAPI 2.6 -- depricated now in favor
- * of MODE_SENSE_POWER_PAGE */
-#define GPMODE_CDROM_PAGE		0x0d
-
-/*
- * Based on values from <linux/cdrom.h> but extending CD_MINS
- * to the maximum common size allowed by the Orange's Book ATIP
- *
- * 90 and 99 min CDs are also available but using them as the
- * upper limit reduces the effectiveness of the heuristic to
- * detect DVDs burned to less than 25% of their maximum capacity
- */
-
-/* Some generally useful CD-ROM information */
-#define CD_MINS                       80 /* max. minutes per CD */
-#define CD_SECS                       60 /* seconds per minute */
-#define CD_FRAMES                     75 /* frames per second */
-#define CD_FRAMESIZE                2048 /* bytes per frame, "cooked" mode */
-#define CD_MAX_BYTES       (CD_MINS * CD_SECS * CD_FRAMES * CD_FRAMESIZE)
-#define CD_MAX_SECTORS     (CD_MAX_BYTES / 512)
-
-/*
- * The MMC values are not IDE specific and might need to be moved
- * to a common header if they are also needed for the SCSI emulation
- */
-
-/* Profile list from MMC-6 revision 1 table 91 */
-#define MMC_PROFILE_NONE                0x0000
-#define MMC_PROFILE_CD_ROM              0x0008
-#define MMC_PROFILE_CD_R                0x0009
-#define MMC_PROFILE_CD_RW               0x000A
-#define MMC_PROFILE_DVD_ROM             0x0010
-#define MMC_PROFILE_DVD_R_SR            0x0011
-#define MMC_PROFILE_DVD_RAM             0x0012
-#define MMC_PROFILE_DVD_RW_RO           0x0013
-#define MMC_PROFILE_DVD_RW_SR           0x0014
-#define MMC_PROFILE_DVD_R_DL_SR         0x0015
-#define MMC_PROFILE_DVD_R_DL_JR         0x0016
-#define MMC_PROFILE_DVD_RW_DL           0x0017
-#define MMC_PROFILE_DVD_DDR             0x0018
-#define MMC_PROFILE_DVD_PLUS_RW         0x001A
-#define MMC_PROFILE_DVD_PLUS_R          0x001B
-#define MMC_PROFILE_DVD_PLUS_RW_DL      0x002A
-#define MMC_PROFILE_DVD_PLUS_R_DL       0x002B
-#define MMC_PROFILE_BD_ROM              0x0040
-#define MMC_PROFILE_BD_R_SRM            0x0041
-#define MMC_PROFILE_BD_R_RRM            0x0042
-#define MMC_PROFILE_BD_RE               0x0043
-#define MMC_PROFILE_HDDVD_ROM           0x0050
-#define MMC_PROFILE_HDDVD_R             0x0051
-#define MMC_PROFILE_HDDVD_RAM           0x0052
-#define MMC_PROFILE_HDDVD_RW            0x0053
-#define MMC_PROFILE_HDDVD_R_DL          0x0058
-#define MMC_PROFILE_HDDVD_RW_DL         0x005A
-#define MMC_PROFILE_INVALID             0xFFFF
-
-#define ATAPI_INT_REASON_CD             0x01 /* 0 = data transfer */
-#define ATAPI_INT_REASON_IO             0x02 /* 1 = transfer to the host */
-#define ATAPI_INT_REASON_REL            0x04
-#define ATAPI_INT_REASON_TAG            0xf8
-
-/* same constants as bochs */
-#define ASC_ILLEGAL_OPCODE                   0x20
-#define ASC_LOGICAL_BLOCK_OOR                0x21
-#define ASC_INV_FIELD_IN_CMD_PACKET          0x24
-#define ASC_MEDIUM_MAY_HAVE_CHANGED          0x28
-#define ASC_INCOMPATIBLE_FORMAT              0x30
-#define ASC_MEDIUM_NOT_PRESENT               0x3a
-#define ASC_SAVING_PARAMETERS_NOT_SUPPORTED  0x39
-#define ASC_MEDIA_REMOVAL_PREVENTED          0x53
-
-#define CFA_NO_ERROR            0x00
-#define CFA_MISC_ERROR          0x09
-#define CFA_INVALID_COMMAND     0x20
-#define CFA_INVALID_ADDRESS     0x21
-#define CFA_ADDRESS_OVERFLOW    0x2f
-
-#define SENSE_NONE            0
-#define SENSE_NOT_READY       2
-#define SENSE_ILLEGAL_REQUEST 5
-#define SENSE_UNIT_ATTENTION  6
-
-#define SMART_READ_DATA       0xd0
-#define SMART_READ_THRESH     0xd1
-#define SMART_ATTR_AUTOSAVE   0xd2
-#define SMART_SAVE_ATTR       0xd3
-#define SMART_EXECUTE_OFFLINE 0xd4
-#define SMART_READ_LOG        0xd5
-#define SMART_WRITE_LOG       0xd6
-#define SMART_ENABLE          0xd8
-#define SMART_DISABLE         0xd9
-#define SMART_STATUS          0xda
+#include "ide-internal.h"
 
 static int smart_attributes[][5] = {
     /* id,  flags, val, wrst, thrsh */
@@ -396,91 +46,6 @@ static int smart_attributes[][5] = {
     { 0x00, 0x00, 0x00, 0x00, 0x00}
 };
 
-
-
-typedef void EndTransferFunc(IDEState *);
-
-/* NOTE: IDEState represents in fact one drive */
-struct IDEState {
-    IDEBus *bus;
-    uint8_t unit;
-    /* ide config */
-    int is_cdrom;
-    int is_cf;
-    int cylinders, heads, sectors;
-    int64_t nb_sectors;
-    int mult_sectors;
-    int identify_set;
-    uint16_t identify_data[256];
-    qemu_irq irq;
-    int drive_serial;
-    char drive_serial_str[21];
-    /* ide regs */
-    uint8_t feature;
-    uint8_t error;
-    uint32_t nsector;
-    uint8_t sector;
-    uint8_t lcyl;
-    uint8_t hcyl;
-    /* other part of tf for lba48 support */
-    uint8_t hob_feature;
-    uint8_t hob_nsector;
-    uint8_t hob_sector;
-    uint8_t hob_lcyl;
-    uint8_t hob_hcyl;
-
-    uint8_t select;
-    uint8_t status;
-
-    /* 0x3f6 command, only meaningful for drive 0 */
-    uint8_t cmd;
-    /* set for lba48 access */
-    uint8_t lba48;
-    BlockDriverState *bs;
-    /* ATAPI specific */
-    uint8_t sense_key;
-    uint8_t asc;
-    uint8_t cdrom_changed;
-    int packet_transfer_size;
-    int elementary_transfer_size;
-    int io_buffer_index;
-    int lba;
-    int cd_sector_size;
-    int atapi_dma; /* true if dma is requested for the packet cmd */
-    /* ATA DMA state */
-    int io_buffer_size;
-    QEMUSGList sg;
-    /* PIO transfer handling */
-    int req_nb_sectors; /* number of sectors per interrupt */
-    EndTransferFunc *end_transfer_func;
-    uint8_t *data_ptr;
-    uint8_t *data_end;
-    uint8_t *io_buffer;
-    QEMUTimer *sector_write_timer; /* only used for win2k install hack */
-    uint32_t irq_count; /* counts IRQs when using win2k install hack */
-    /* CF-ATA extended error */
-    uint8_t ext_error;
-    /* CF-ATA metadata storage */
-    uint32_t mdata_size;
-    uint8_t *mdata_storage;
-    int media_changed;
-    /* for pmac */
-    int is_read;
-    /* SMART */
-    uint8_t smart_enabled;
-    uint8_t smart_autosave;
-    int smart_errors;
-    uint8_t smart_selftest_count;
-    uint8_t *smart_selftest_data;
-};
-
-struct IDEBus {
-    BusState qbus;
-    BMDMAState *bmdma;
-    IDEState ifs[2];
-    uint8_t unit;
-};
-
 /* XXX: DVDs that could fit on a CD will be reported as a CD */
 static inline int media_present(IDEState *s)
 {
@@ -497,49 +62,18 @@ static inline int media_is_cd(IDEState *s)
     return (media_present(s) && s->nb_sectors <= CD_MAX_SECTORS);
 }
 
-#define BM_STATUS_DMAING 0x01
-#define BM_STATUS_ERROR  0x02
-#define BM_STATUS_INT    0x04
-#define BM_STATUS_DMA_RETRY  0x08
-#define BM_STATUS_PIO_RETRY  0x10
-
-#define BM_CMD_START     0x01
-#define BM_CMD_READ      0x08
-
 #define IDE_TYPE_PIIX3   0
 #define IDE_TYPE_CMD646  1
 #define IDE_TYPE_PIIX4   2
 
 /* CMD646 specific */
-#define MRDMODE		0x71
-#define   MRDMODE_INTR_CH0	0x04
-#define   MRDMODE_INTR_CH1	0x08
-#define   MRDMODE_BLK_CH0	0x10
-#define   MRDMODE_BLK_CH1	0x20
-#define UDIDETCR0	0x73
-#define UDIDETCR1	0x7B
-
-struct BMDMAState {
-    uint8_t cmd;
-    uint8_t status;
-    uint32_t addr;
-
-    struct PCIIDEState *pci_dev;
-    IDEBus *bus;
-    /* current transfer state */
-    uint32_t cur_addr;
-    uint32_t cur_prd_last;
-    uint32_t cur_prd_addr;
-    uint32_t cur_prd_len;
-    uint8_t unit;
-    BlockDriverCompletionFunc *dma_cb;
-    BlockDriverAIOCB *aiocb;
-    struct iovec iov;
-    QEMUIOVector qiov;
-    int64_t sector_num;
-    uint32_t nsector;
-    QEMUBH *bh;
-};
+#define MRDMODE                0x71
+#define   MRDMODE_INTR_CH0     0x04
+#define   MRDMODE_INTR_CH1     0x08
+#define   MRDMODE_BLK_CH0      0x10
+#define   MRDMODE_BLK_CH1      0x20
+#define UDIDETCR0      0x73
+#define UDIDETCR1      0x7B
 
 typedef struct PCIIDEState {
     PCIDevice dev;
@@ -548,17 +82,6 @@ typedef struct PCIIDEState {
     int type; /* see IDE_TYPE_xxx */
 } PCIIDEState;
 
-static inline IDEState *bmdma_active_if(BMDMAState *bmdma)
-{
-    assert(bmdma->unit != -1);
-    return bmdma->bus->ifs + bmdma->unit;
-}
-
-static inline IDEState *idebus_active_if(IDEBus *bus)
-{
-    return bus->ifs + bus->unit;
-}
-
 static void ide_dma_start(IDEState *s, BlockDriverCompletionFunc *dma_cb);
 static void ide_dma_restart(IDEState *s);
 static void ide_atapi_cmd_read_dma_cb(void *opaque, int ret);
@@ -810,17 +333,6 @@ static inline void ide_dma_submit_check(IDEState *s,
     dma_cb(bm, -1);
 }
 
-static inline void ide_set_irq(IDEState *s)
-{
-    BMDMAState *bm = s->bus->bmdma;
-    if (!(s->cmd & IDE_CMD_DISABLE_IRQ)) {
-        if (bm) {
-            bm->status |= BM_STATUS_INT;
-        }
-        qemu_irq_raise(s->irq);
-    }
-}
-
 /* prepare data transfer and tell what to do after */
 static void ide_transfer_start(IDEState *s, uint8_t *buf, int size,
                                EndTransferFunc *end_transfer_func)
@@ -840,7 +352,7 @@ static void ide_transfer_stop(IDEState *s)
     s->status &= ~DRQ_STAT;
 }
 
-static int64_t ide_get_sector(IDEState *s)
+int64_t ide_get_sector(IDEState *s)
 {
     int64_t sector_num;
     if (s->select & 0x40) {
@@ -862,7 +374,7 @@ static int64_t ide_get_sector(IDEState *s)
     return sector_num;
 }
 
-static void ide_set_sector(IDEState *s, int64_t sector_num)
+void ide_set_sector(IDEState *s, int64_t sector_num)
 {
     unsigned int cyl, r;
     if (s->select & 0x40) {
@@ -970,7 +482,7 @@ static void dma_buf_commit(IDEState *s, int is_write)
     qemu_sglist_destroy(&s->sg);
 }
 
-static void ide_dma_error(IDEState *s)
+void ide_dma_error(IDEState *s)
 {
     ide_transfer_stop(s);
     s->error = ABRT_ERR;
@@ -1178,7 +690,7 @@ static void ide_dma_restart_bh(void *opaque)
     }
 }
 
-static void ide_dma_restart_cb(void *opaque, int running, int reason)
+void ide_dma_restart_cb(void *opaque, int running, int reason)
 {
     BMDMAState *bm = opaque;
 
@@ -1246,7 +758,7 @@ static void ide_sector_write_dma(IDEState *s)
     ide_dma_start(s, ide_write_dma_cb);
 }
 
-static void ide_atapi_cmd_ok(IDEState *s)
+void ide_atapi_cmd_ok(IDEState *s)
 {
     s->error = 0;
     s->status = READY_STAT | SEEK_STAT;
@@ -1254,7 +766,7 @@ static void ide_atapi_cmd_ok(IDEState *s)
     ide_set_irq(s);
 }
 
-static void ide_atapi_cmd_error(IDEState *s, int sense_key, int asc)
+void ide_atapi_cmd_error(IDEState *s, int sense_key, int asc)
 {
 #ifdef DEBUG_IDE_ATAPI
     printf("atapi_cmd_error: sense=0x%x asc=0x%x\n", sense_key, asc);
@@ -1349,7 +861,7 @@ static int cd_read_sector(BlockDriverState *bs, int lba, uint8_t *buf,
     return ret;
 }
 
-static void ide_atapi_io_error(IDEState *s, int ret)
+void ide_atapi_io_error(IDEState *s, int ret)
 {
     /* XXX: handle more errors */
     if (ret == -ENOMEDIUM) {
@@ -2209,7 +1721,7 @@ static void ide_clear_hob(IDEBus *bus)
     bus->ifs[1].select &= ~(1 << 7);
 }
 
-static void ide_ioport_write(void *opaque, uint32_t addr, uint32_t val)
+void ide_ioport_write(void *opaque, uint32_t addr, uint32_t val)
 {
     IDEBus *bus = opaque;
     IDEState *s;
@@ -2781,7 +2293,7 @@ static void ide_ioport_write(void *opaque, uint32_t addr, uint32_t val)
     }
 }
 
-static uint32_t ide_ioport_read(void *opaque, uint32_t addr1)
+uint32_t ide_ioport_read(void *opaque, uint32_t addr1)
 {
     IDEBus *bus = opaque;
     IDEState *s = idebus_active_if(bus);
@@ -2859,7 +2371,7 @@ static uint32_t ide_ioport_read(void *opaque, uint32_t addr1)
     return ret;
 }
 
-static uint32_t ide_status_read(void *opaque, uint32_t addr)
+uint32_t ide_status_read(void *opaque, uint32_t addr)
 {
     IDEBus *bus = opaque;
     IDEState *s = idebus_active_if(bus);
@@ -2876,7 +2388,7 @@ static uint32_t ide_status_read(void *opaque, uint32_t addr)
     return ret;
 }
 
-static void ide_cmd_write(void *opaque, uint32_t addr, uint32_t val)
+void ide_cmd_write(void *opaque, uint32_t addr, uint32_t val)
 {
     IDEBus *bus = opaque;
     IDEState *s;
@@ -2911,7 +2423,7 @@ static void ide_cmd_write(void *opaque, uint32_t addr, uint32_t val)
     bus->ifs[1].cmd = val;
 }
 
-static void ide_data_writew(void *opaque, uint32_t addr, uint32_t val)
+void ide_data_writew(void *opaque, uint32_t addr, uint32_t val)
 {
     IDEBus *bus = opaque;
     IDEState *s = idebus_active_if(bus);
@@ -2929,7 +2441,7 @@ static void ide_data_writew(void *opaque, uint32_t addr, uint32_t val)
         s->end_transfer_func(s);
 }
 
-static uint32_t ide_data_readw(void *opaque, uint32_t addr)
+uint32_t ide_data_readw(void *opaque, uint32_t addr)
 {
     IDEBus *bus = opaque;
     IDEState *s = idebus_active_if(bus);
@@ -2949,7 +2461,7 @@ static uint32_t ide_data_readw(void *opaque, uint32_t addr)
     return ret;
 }
 
-static void ide_data_writel(void *opaque, uint32_t addr, uint32_t val)
+void ide_data_writel(void *opaque, uint32_t addr, uint32_t val)
 {
     IDEBus *bus = opaque;
     IDEState *s = idebus_active_if(bus);
@@ -2967,7 +2479,7 @@ static void ide_data_writel(void *opaque, uint32_t addr, uint32_t val)
         s->end_transfer_func(s);
 }
 
-static uint32_t ide_data_readl(void *opaque, uint32_t addr)
+uint32_t ide_data_readl(void *opaque, uint32_t addr)
 {
     IDEBus *bus = opaque;
     IDEState *s = idebus_active_if(bus);
@@ -2997,7 +2509,7 @@ static void ide_dummy_transfer_stop(IDEState *s)
     s->io_buffer[3] = 0xff;
 }
 
-static void ide_reset(IDEState *s)
+void ide_reset(IDEState *s)
 {
     IDEBus *bus = s->bus;
 
@@ -3016,9 +2528,8 @@ static void ide_reset(IDEState *s)
     s->media_changed = 0;
 }
 
-static void ide_init2(IDEBus *bus,
-                      BlockDriverState *hd0, BlockDriverState *hd1,
-                      qemu_irq irq)
+void ide_init2(IDEBus *bus, BlockDriverState *hd0, BlockDriverState *hd1,
+               qemu_irq irq)
 {
     IDEState *s;
     static int drive_serial = 1;
@@ -3063,7 +2574,7 @@ static void ide_init2(IDEBus *bus,
     }
 }
 
-static void ide_init_ioport(IDEBus *bus, int iobase, int iobase2)
+void ide_init_ioport(IDEBus *bus, int iobase, int iobase2)
 {
     register_ioport_write(iobase, 8, 1, ide_ioport_write, bus);
     register_ioport_read(iobase, 8, 1, ide_ioport_read, bus);
@@ -3080,7 +2591,7 @@ static void ide_init_ioport(IDEBus *bus, int iobase, int iobase2)
 }
 
 /* save per IDE drive data */
-static void ide_save(QEMUFile* f, IDEState *s)
+void ide_save(QEMUFile* f, IDEState *s)
 {
     qemu_put_be32(f, s->mult_sectors);
     qemu_put_be32(f, s->identify_set);
@@ -3109,7 +2620,7 @@ static void ide_save(QEMUFile* f, IDEState *s)
 }
 
 /* load per IDE drive data */
-static void ide_load(QEMUFile* f, IDEState *s, int version_id)
+void ide_load(QEMUFile* f, IDEState *s, int version_id)
 {
     s->mult_sectors=qemu_get_be32(f);
     s->identify_set=qemu_get_be32(f);
@@ -3143,14 +2654,14 @@ static void ide_load(QEMUFile* f, IDEState *s, int version_id)
     /* XXX: if a transfer is pending, we do not save it yet */
 }
 
-static void idebus_save(QEMUFile* f, IDEBus *bus)
+void idebus_save(QEMUFile* f, IDEBus *bus)
 {
     IDEState *s = idebus_active_if(bus);
     qemu_put_8s(f, &s->cmd);
     qemu_put_8s(f, &bus->unit);
 }
 
-static void idebus_load(QEMUFile* f, IDEBus *bus, int version_id)
+void idebus_load(QEMUFile* f, IDEBus *bus, int version_id)
 {
     IDEState *s;
     uint8_t cmd;
@@ -3233,7 +2744,7 @@ static void ide_dma_restart(IDEState *s)
     ide_dma_start(s, bm->dma_cb);
 }
 
-static void ide_dma_cancel(BMDMAState *bm)
+void ide_dma_cancel(BMDMAState *bm)
 {
     if (bm->status & BM_STATUS_DMAING) {
         bm->status &= ~BM_STATUS_DMAING;