ahci: send init d2h fis on fis enable

The drive sends a d2h init fis on initialization. Usually, the guest doesn't
receive fises yet at that point though, so the delivery is deferred.

Let's reflect that by sending the init fis on fis receive enablement.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 87e62065bb5e0e544e45e6935e3ac2b053fe446e)

2 files changed, 32 insertions, 7 deletions

diff --git a/hw/ide/ahci.c b/hw/ide/ahci.c
index 6822046859..e6ac77c678 100644
--- a/hw/ide/ahci.c
+++ b/hw/ide/ahci.c
@@ -47,6 +47,7 @@ static void check_cmd(AHCIState *s, int port);
 static int handle_cmd(AHCIState *s,int port,int slot);
 static void ahci_reset_port(AHCIState *s, int port);
 static void ahci_write_fis_d2h(AHCIDevice *ad, uint8_t *cmd_fis);
+static void ahci_init_d2h(AHCIDevice *ad);
 
 static uint32_t  ahci_port_read(AHCIState *s, int port, int offset)
 {
@@ -230,6 +231,16 @@ static void  ahci_port_write(AHCIState *s, int port, int offset, uint32_t val)
                 pr->cmd |= PORT_CMD_FIS_ON;
             }
 
+            /* XXX usually the FIS would be pending on the bus here and
+                   issuing deferred until the OS enables FIS receival.
+                   Instead, we only submit it once - which works in most
+                   cases, but is a hack. */
+            if ((pr->cmd & PORT_CMD_FIS_ON) &&
+                !s->dev[port].init_d2h_sent) {
+                ahci_init_d2h(&s->dev[port]);
+                s->dev[port].init_d2h_sent = 1;
+            }
+
             check_cmd(s, port);
             break;
         case PORT_TFDATA:
@@ -462,12 +473,29 @@ static void ahci_check_cmd_bh(void *opaque)
     check_cmd(ad->hba, ad->port_no);
 }
 
+static void ahci_init_d2h(AHCIDevice *ad)
+{
+    uint8_t init_fis[0x20];
+    IDEState *ide_state = &ad->port.ifs[0];
+
+    memset(init_fis, 0, sizeof(init_fis));
+
+    init_fis[4] = 1;
+    init_fis[12] = 1;
+
+    if (ide_state->drive_kind == IDE_CD) {
+        init_fis[5] = ide_state->lcyl;
+        init_fis[6] = ide_state->hcyl;
+    }
+
+    ahci_write_fis_d2h(ad, init_fis);
+}
+
 static void ahci_reset_port(AHCIState *s, int port)
 {
     AHCIDevice *d = &s->dev[port];
     AHCIPortRegs *pr = &d->port_regs;
     IDEState *ide_state = &d->port.ifs[0];
-    uint8_t init_fis[0x20];
     int i;
 
     DPRINTF(port, "reset port\n");
@@ -482,6 +510,7 @@ static void ahci_reset_port(AHCIState *s, int port)
     pr->scr_err = 0;
     pr->scr_act = 0;
     d->busy_slot = -1;
+    d->init_d2h_sent = 0;
 
     ide_state = &s->dev[port].port.ifs[0];
     if (!ide_state->bs) {
@@ -504,7 +533,6 @@ static void ahci_reset_port(AHCIState *s, int port)
         ncq_tfs->used = 0;
     }
 
-    memset(init_fis, 0, sizeof(init_fis));
     s->dev[port].port_state = STATE_RUN;
     if (!ide_state->bs) {
         s->dev[port].port_regs.sig = 0;
@@ -514,8 +542,6 @@ static void ahci_reset_port(AHCIState *s, int port)
         ide_state->lcyl = 0x14;
         ide_state->hcyl = 0xeb;
         DPRINTF(port, "set lcyl = %d\n", ide_state->lcyl);
-        init_fis[5] = ide_state->lcyl;
-        init_fis[6] = ide_state->hcyl;
         ide_state->status = SEEK_STAT | WRERR_STAT | READY_STAT;
     } else {
         s->dev[port].port_regs.sig = SATA_SIGNATURE_DISK;
@@ -523,9 +549,7 @@ static void ahci_reset_port(AHCIState *s, int port)
     }
 
     ide_state->error = 1;
-    init_fis[4] = 1;
-    init_fis[12] = 1;
-    ahci_write_fis_d2h(d, init_fis);
+    ahci_init_d2h(d);
 }
 
 static void debug_print_fis(uint8_t *fis, int cmd_len)
diff --git a/hw/ide/ahci.h b/hw/ide/ahci.h
index d65b5e334a..b2786d1c07 100644
--- a/hw/ide/ahci.h
+++ b/hw/ide/ahci.h
@@ -282,6 +282,7 @@ struct AHCIDevice {
     int dma_status;
     int done_atapi_packet;
     int busy_slot;
+    int init_d2h_sent;
     BlockDriverCompletionFunc *dma_cb;
     AHCICmdHdr *cur_cmd;
     NCQTransferState ncq_tfs[AHCI_MAX_CMDS];