ahci: make number of ports runtime determined

Different AHCI controllers have a different number of ports, so the core
shouldn't care about the amount of ports available.

This patch makes the number of ports available to the AHCI core runtime
configurable, allowing us to have multiple different AHCI implementations
with different amounts of ports.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 2c4b9d0ea42c27ec2112e437a0fa954afe73bd23)

3 files changed, 26 insertions, 16 deletions

diff --git a/hw/ide/ahci.c b/hw/ide/ahci.c
index 105dd53916..98bdf7059a 100644
--- a/hw/ide/ahci.c
+++ b/hw/ide/ahci.c
@@ -145,7 +145,7 @@ static void ahci_check_irq(AHCIState *s)
 
     DPRINTF(-1, "check irq %#x\n", s->control_regs.irqstatus);
 
-    for (i = 0; i < SATA_PORTS; i++) {
+    for (i = 0; i < s->ports; i++) {
         AHCIPortRegs *pr = &s->dev[i].port_regs;
         if (pr->irq_stat & pr->irq_mask) {
             s->control_regs.irqstatus |= (1 << i);
@@ -303,7 +303,8 @@ static uint32_t ahci_mem_readl(void *ptr, target_phys_addr_t addr)
 
         DPRINTF(-1, "(addr 0x%08X), val 0x%08X\n", (unsigned) addr, val);
     } else if ((addr >= AHCI_PORT_REGS_START_ADDR) &&
-               (addr < AHCI_PORT_REGS_END_ADDR)) {
+               (addr < (AHCI_PORT_REGS_START_ADDR +
+                (s->ports * AHCI_PORT_ADDR_OFFSET_LEN)))) {
         val = ahci_port_read(s, (addr - AHCI_PORT_REGS_START_ADDR) >> 7,
                              addr & AHCI_PORT_ADDR_OFFSET_MASK);
     }
@@ -355,7 +356,8 @@ static void ahci_mem_writel(void *ptr, target_phys_addr_t addr, uint32_t val)
                 DPRINTF(-1, "write to unknown register 0x%x\n", (unsigned)addr);
         }
     } else if ((addr >= AHCI_PORT_REGS_START_ADDR) &&
-               (addr < AHCI_PORT_REGS_END_ADDR)) {
+               (addr < (AHCI_PORT_REGS_START_ADDR +
+                (s->ports * AHCI_PORT_ADDR_OFFSET_LEN)))) {
         ahci_port_write(s, (addr - AHCI_PORT_REGS_START_ADDR) >> 7,
                         addr & AHCI_PORT_ADDR_OFFSET_MASK, val);
     }
@@ -378,16 +380,16 @@ static void ahci_reg_init(AHCIState *s)
 {
     int i;
 
-    s->control_regs.cap = (SATA_PORTS - 1) |
+    s->control_regs.cap = (s->ports - 1) |
                           (AHCI_NUM_COMMAND_SLOTS << 8) |
                           (AHCI_SUPPORTED_SPEED_GEN1 << AHCI_SUPPORTED_SPEED) |
                           HOST_CAP_NCQ | HOST_CAP_AHCI;
 
-    s->control_regs.impl = (1 << SATA_PORTS) - 1;
+    s->control_regs.impl = (1 << s->ports) - 1;
 
     s->control_regs.version = AHCI_VERSION_1_0;
 
-    for (i = 0; i < SATA_PORTS; i++) {
+    for (i = 0; i < s->ports; i++) {
         s->dev[i].port_state = STATE_RUN;
     }
 }
@@ -1096,17 +1098,19 @@ static const IDEDMAOps ahci_dma_ops = {
     .reset = ahci_dma_reset,
 };
 
-void ahci_init(AHCIState *s, DeviceState *qdev)
+void ahci_init(AHCIState *s, DeviceState *qdev, int ports)
 {
     qemu_irq *irqs;
     int i;
 
+    s->ports = ports;
+    s->dev = qemu_mallocz(sizeof(AHCIDevice) * ports);
     ahci_reg_init(s);
     s->mem = cpu_register_io_memory(ahci_readfn, ahci_writefn, s,
                                     DEVICE_LITTLE_ENDIAN);
-    irqs = qemu_allocate_irqs(ahci_irq_set, s, SATA_PORTS);
+    irqs = qemu_allocate_irqs(ahci_irq_set, s, s->ports);
 
-    for (i = 0; i < SATA_PORTS; i++) {
+    for (i = 0; i < s->ports; i++) {
         AHCIDevice *ad = &s->dev[i];
 
         ide_bus_new(&ad->port, qdev, i);
@@ -1120,6 +1124,11 @@ void ahci_init(AHCIState *s, DeviceState *qdev)
     }
 }
 
+void ahci_uninit(AHCIState *s)
+{
+    qemu_free(s->dev);
+}
+
 void ahci_pci_map(PCIDevice *pci_dev, int region_num,
         pcibus_t addr, pcibus_t size, int type)
 {
@@ -1137,7 +1146,7 @@ void ahci_reset(void *opaque)
     d->ahci.control_regs.irqstatus = 0;
     d->ahci.control_regs.ghc = 0;
 
-    for (i = 0; i < SATA_PORTS; i++) {
+    for (i = 0; i < d->ahci.ports; i++) {
         ahci_reset_port(&d->ahci, i);
     }
 }
diff --git a/hw/ide/ahci.h b/hw/ide/ahci.h
index b2786d1c07..a4560c41b6 100644
--- a/hw/ide/ahci.h
+++ b/hw/ide/ahci.h
@@ -188,11 +188,9 @@
 #define AHCI_GENERIC_HOST_CONTROL_REGS_MAX_ADDR 0x20
                                             /* Shouldn't this be 0x2c? */
 
-#define SATA_PORTS                         4
-
 #define AHCI_PORT_REGS_START_ADDR          0x100
-#define AHCI_PORT_REGS_END_ADDR (AHCI_PORT_REGS_START_ADDR + SATA_PORTS * 0x80)
 #define AHCI_PORT_ADDR_OFFSET_MASK         0x7f
+#define AHCI_PORT_ADDR_OFFSET_LEN          0x80
 
 #define AHCI_NUM_COMMAND_SLOTS             31
 #define AHCI_SUPPORTED_SPEED               20
@@ -289,9 +287,10 @@ struct AHCIDevice {
 };
 
 typedef struct AHCIState {
-    AHCIDevice dev[SATA_PORTS];
+    AHCIDevice *dev;
     AHCIControlRegs control_regs;
     int mem;
+    int ports;
     qemu_irq irq;
 } AHCIState;
 
@@ -323,7 +322,8 @@ typedef struct NCQFrame {
     uint8_t reserved10;
 } __attribute__ ((packed)) NCQFrame;
 
-void ahci_init(AHCIState *s, DeviceState *qdev);
+void ahci_init(AHCIState *s, DeviceState *qdev, int ports);
+void ahci_uninit(AHCIState *s);
 
 void ahci_pci_map(PCIDevice *pci_dev, int region_num,
         pcibus_t addr, pcibus_t size, int type);
diff --git a/hw/ide/ich.c b/hw/ide/ich.c
index 70cb766990..f242d7a81f 100644
--- a/hw/ide/ich.c
+++ b/hw/ide/ich.c
@@ -100,7 +100,7 @@ static int pci_ich9_ahci_init(PCIDevice *dev)
 
     msi_init(dev, 0x50, 1, true, false);
 
-    ahci_init(&d->ahci, &dev->qdev);
+    ahci_init(&d->ahci, &dev->qdev, 6);
     d->ahci.irq = d->card.irq[0];
 
     return 0;
@@ -116,6 +116,7 @@ static int pci_ich9_uninit(PCIDevice *dev)
     }
 
     qemu_unregister_reset(ahci_reset, d);
+    ahci_uninit(&d->ahci);
 
     return 0;
 }