usb: split packet result into actual_length + status

Since with the ehci and xhci controllers a single packet can be larger
then maxpacketsize, it is possible for the result of a single packet
to be both having transferred some data as well as the transfer to have
an error.

An example would be an input transfer from a bulk endpoint successfully
receiving 1 or more maxpacketsize packets from the device, followed
by a packet signalling halt.

While already touching all the devices and controllers handle_packet /
handle_data / handle_control code, also change the return type of
these functions to void, solely storing the status in the packet. To
make the code paths for regular versus async packet handling more
uniform.

This patch unfortunately is somewhat invasive, since makeing the qemu
usb core deal with this requires changes everywhere. This patch only
prepares the usb core for this, all the hcd / device changes are done
in such a way that there are no functional changes.

This patch has been tested with uhci and ehci hcds, together with usb-audio,
usb-hid and usb-storage devices, as well as with usb-redir redirection
with a wide variety of real devices.

Note that there is usually no need to directly set packet->actual_length
form devices handle_data callback, as that is done by usb_packet_copy()

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

1 files changed, 12 insertions, 15 deletions

diff --git a/hw/usb/host-bsd.c b/hw/usb/host-bsd.c
index ec26266620..6473e8b747 100644
--- a/hw/usb/host-bsd.c
+++ b/hw/usb/host-bsd.c
@@ -121,7 +121,7 @@ static void usb_host_handle_reset(USBDevice *dev)
  * -check device states against transfer requests
  *  and return appropriate response
  */
-static int usb_host_handle_control(USBDevice *dev,
+static void usb_host_handle_control(USBDevice *dev,
                                    USBPacket *p,
                                    int request,
                                    int value,
@@ -139,7 +139,6 @@ static int usb_host_handle_control(USBDevice *dev,
 
         /* specific SET_ADDRESS support */
         dev->addr = value;
-        return 0;
     } else if ((request >> 8) == UT_WRITE_DEVICE &&
                (request & 0xff) == UR_SET_CONFIG) {
 
@@ -151,10 +150,8 @@ static int usb_host_handle_control(USBDevice *dev,
             printf("handle_control: failed to set configuration - %s\n",
                    strerror(errno));
 #endif
-            return USB_RET_STALL;
+            p->status = USB_RET_STALL;
         }
-
-        return 0;
     } else if ((request >> 8) == UT_WRITE_INTERFACE &&
                (request & 0xff) == UR_SET_INTERFACE) {
 
@@ -168,10 +165,8 @@ static int usb_host_handle_control(USBDevice *dev,
             printf("handle_control: failed to set alternate interface - %s\n",
                    strerror(errno));
 #endif
-            return USB_RET_STALL;
+            p->status = USB_RET_STALL;
         }
-
-        return 0;
     } else {
         req.ucr_request.bmRequestType = request >> 8;
         req.ucr_request.bRequest = request & 0xff;
@@ -201,14 +196,14 @@ static int usb_host_handle_control(USBDevice *dev,
             printf("handle_control: error after request - %s\n",
                    strerror(errno));
 #endif
-            return USB_RET_NAK; // STALL
+            p->status = USB_RET_NAK; /* STALL */
         } else {
-            return req.ucr_actlen;
+            p->actual_length = req.ucr_actlen;
         }
     }
 }
 
-static int usb_host_handle_data(USBDevice *dev, USBPacket *p)
+static void usb_host_handle_data(USBDevice *dev, USBPacket *p)
 {
     USBHostDevice *s = (USBHostDevice *)dev;
     int ret, fd, mode;
@@ -232,7 +227,8 @@ static int usb_host_handle_data(USBDevice *dev, USBPacket *p)
     fd = ensure_ep_open(s, devep, mode);
     if (fd < 0) {
         sigprocmask(SIG_SETMASK, &old_mask, NULL);
-        return USB_RET_NODEV;
+        p->status = USB_RET_NODEV;
+        return;
     }
 
     if (ioctl(fd, USB_SET_TIMEOUT, &timeout) < 0) {
@@ -267,12 +263,13 @@ static int usb_host_handle_data(USBDevice *dev, USBPacket *p)
         switch(errno) {
         case ETIMEDOUT:
         case EINTR:
-            return USB_RET_NAK;
+            p->status = USB_RET_NAK;
+            break;
         default:
-            return USB_RET_STALL;
+            p->status = USB_RET_STALL;
         }
     } else {
-        return ret;
+        p->actual_length = ret;
     }
 }