usbredir: Add support for buffered bulk input (v2)

Buffered bulk mode is intended for bulk *input* endpoints, where the data is
of a streaming nature (not part of a command-response protocol). These
endpoints' input buffer may overflow if data is not read quickly enough.
So in buffered bulk mode the usb-host takes care of the submitting and
re-submitting of bulk transfers.

Buffered bulk mode is necessary for reliable operation with the bulk in
endpoints of usb to serial convertors. Unfortunatelty buffered bulk input
mode will only work with certain devices, therefor this patch also adds a
usb-id table to enable it for devices which need it, while leaving the
bulk ep handling for other devices unmodified.

Note that the bumping of the required usbredir from 0.5.3 to 0.6 does
not mean that we will now need a newer usbredir release then qemu-1.3,
.pc files reporting 0.5.3 have only ever existed in usbredir builds directly
from git, so qemu-1.3 needs the 0.6 release too.

Changes in v2:
-Split of quirk handling into quirks.c

Signed-off-by: Hans de Goede <hdegoede@redhat.com>

1 files changed, 1255 insertions, 0 deletions

diff --git a/hw/usb/quirks-ftdi-ids.h b/hw/usb/quirks-ftdi-ids.h
new file mode 100644
index 0000000000..57c12ef662
--- /dev/null
+++ b/hw/usb/quirks-ftdi-ids.h
@@ -0,0 +1,1255 @@
+/*
+ * vendor/product IDs (VID/PID) of devices using FTDI USB serial converters.
+ * Please keep numerically sorted within individual areas, thanks!
+ *
+ * Philipp Gühring - pg@futureware.at - added the Device ID of the USB relais
+ * from Rudolf Gugler
+ *
+ */
+
+
+/**********************************/
+/***** devices using FTDI VID *****/
+/**********************************/
+
+
+#define FTDI_VID	0x0403	/* Vendor Id */
+
+
+/*** "original" FTDI device PIDs ***/
+
+#define FTDI_8U232AM_PID 0x6001 /* Similar device to SIO above */
+#define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */
+#define FTDI_8U2232C_PID 0x6010 /* Dual channel device */
+#define FTDI_4232H_PID 0x6011 /* Quad channel hi-speed device */
+#define FTDI_232H_PID  0x6014 /* Single channel hi-speed device */
+#define FTDI_FTX_PID   0x6015 /* FT-X series (FT201X, FT230X, FT231X, etc) */
+#define FTDI_SIO_PID	0x8372	/* Product Id SIO application of 8U100AX */
+#define FTDI_232RL_PID  0xFBFA  /* Product ID for FT232RL */
+
+
+/*** third-party PIDs (using FTDI_VID) ***/
+
+#define FTDI_LUMEL_PD12_PID	0x6002
+
+/*
+ * Marvell OpenRD Base, Client
+ * http://www.open-rd.org
+ * OpenRD Base, Client use VID 0x0403
+ */
+#define MARVELL_OPENRD_PID	0x9e90
+
+/* www.candapter.com Ewert Energy Systems CANdapter device */
+#define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */
+
+/*
+ * Texas Instruments XDS100v2 JTAG / BeagleBone A3
+ * http://processors.wiki.ti.com/index.php/XDS100
+ * http://beagleboard.org/bone
+ */
+#define TI_XDS100V2_PID		0xa6d0
+
+#define FTDI_NXTCAM_PID		0xABB8 /* NXTCam for Mindstorms NXT */
+
+/* US Interface Navigator (http://www.usinterface.com/) */
+#define FTDI_USINT_CAT_PID	0xb810	/* Navigator CAT and 2nd PTT lines */
+#define FTDI_USINT_WKEY_PID	0xb811	/* Navigator WKEY and FSK lines */
+#define FTDI_USINT_RS232_PID	0xb812	/* Navigator RS232 and CONFIG lines */
+
+/* OOCDlink by Joern Kaipf <joernk@web.de>
+ * (http://www.joernonline.de/) */
+#define FTDI_OOCDLINK_PID	0xbaf8	/* Amontec JTAGkey */
+
+/* Luminary Micro Stellaris Boards, VID = FTDI_VID */
+/* FTDI 2332C Dual channel device, side A=245 FIFO (JTAG), Side B=RS232 UART */
+#define LMI_LM3S_DEVEL_BOARD_PID	0xbcd8
+#define LMI_LM3S_EVAL_BOARD_PID		0xbcd9
+#define LMI_LM3S_ICDI_BOARD_PID		0xbcda
+
+#define FTDI_TURTELIZER_PID	0xBDC8 /* JTAG/RS-232 adapter by egnite GmbH */
+
+/* OpenDCC (www.opendcc.de) product id */
+#define FTDI_OPENDCC_PID	0xBFD8
+#define FTDI_OPENDCC_SNIFFER_PID	0xBFD9
+#define FTDI_OPENDCC_THROTTLE_PID	0xBFDA
+#define FTDI_OPENDCC_GATEWAY_PID	0xBFDB
+#define FTDI_OPENDCC_GBM_PID	0xBFDC
+
+/* NZR SEM 16+ USB (http://www.nzr.de) */
+#define FTDI_NZR_SEM_USB_PID	0xC1E0	/* NZR SEM-LOG16+ */
+
+/*
+ * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com)
+ */
+#define FTDI_RRCIRKITS_LOCOBUFFER_PID	0xc7d0	/* LocoBuffer USB */
+
+/* DMX4ALL DMX Interfaces */
+#define FTDI_DMX4ALL 0xC850
+
+/*
+ * ASK.fr devices
+ */
+#define FTDI_ASK_RDR400_PID	0xC991	/* ASK RDR 400 series card reader */
+
+/* www.starting-point-systems.com µChameleon device */
+#define FTDI_MICRO_CHAMELEON_PID	0xCAA0	/* Product Id */
+
+/*
+ * Tactrix OpenPort (ECU) devices.
+ * OpenPort 1.3M submitted by Donour Sizemore.
+ * OpenPort 1.3S and 1.3U submitted by Ian Abbott.
+ */
+#define FTDI_TACTRIX_OPENPORT_13M_PID	0xCC48	/* OpenPort 1.3 Mitsubishi */
+#define FTDI_TACTRIX_OPENPORT_13S_PID	0xCC49	/* OpenPort 1.3 Subaru */
+#define FTDI_TACTRIX_OPENPORT_13U_PID	0xCC4A	/* OpenPort 1.3 Universal */
+
+#define FTDI_DISTORTEC_JTAG_LOCK_PICK_PID	0xCFF8
+
+/* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */
+/* the VID is the standard ftdi vid (FTDI_VID) */
+#define FTDI_SCS_DEVICE_0_PID 0xD010    /* SCS PTC-IIusb */
+#define FTDI_SCS_DEVICE_1_PID 0xD011    /* SCS Tracker / DSP TNC */
+#define FTDI_SCS_DEVICE_2_PID 0xD012
+#define FTDI_SCS_DEVICE_3_PID 0xD013
+#define FTDI_SCS_DEVICE_4_PID 0xD014
+#define FTDI_SCS_DEVICE_5_PID 0xD015
+#define FTDI_SCS_DEVICE_6_PID 0xD016
+#define FTDI_SCS_DEVICE_7_PID 0xD017
+
+/* iPlus device */
+#define FTDI_IPLUS_PID 0xD070 /* Product Id */
+#define FTDI_IPLUS2_PID 0xD071 /* Product Id */
+
+/*
+ * Gamma Scout (http://gamma-scout.com/). Submitted by rsc@runtux.com.
+ */
+#define FTDI_GAMMA_SCOUT_PID		0xD678	/* Gamma Scout online */
+
+/* Propox devices */
+#define FTDI_PROPOX_JTAGCABLEII_PID	0xD738
+#define FTDI_PROPOX_ISPCABLEIII_PID	0xD739
+
+/* Lenz LI-USB Computer Interface. */
+#define FTDI_LENZ_LIUSB_PID	0xD780
+
+/* Vardaan Enterprises Serial Interface VEUSB422R3 */
+#define FTDI_VARDAAN_PID	0xF070
+
+/*
+ * Xsens Technologies BV products (http://www.xsens.com).
+ */
+#define XSENS_CONVERTER_0_PID	0xD388
+#define XSENS_CONVERTER_1_PID	0xD389
+#define XSENS_CONVERTER_2_PID	0xD38A
+#define XSENS_CONVERTER_3_PID	0xD38B
+#define XSENS_CONVERTER_4_PID	0xD38C
+#define XSENS_CONVERTER_5_PID	0xD38D
+#define XSENS_CONVERTER_6_PID	0xD38E
+#define XSENS_CONVERTER_7_PID	0xD38F
+
+/*
+ * NDI (www.ndigital.com) product ids
+ */
+#define FTDI_NDI_HUC_PID		0xDA70	/* NDI Host USB Converter */
+#define FTDI_NDI_SPECTRA_SCU_PID	0xDA71	/* NDI Spectra SCU */
+#define FTDI_NDI_FUTURE_2_PID		0xDA72	/* NDI future device #2 */
+#define FTDI_NDI_FUTURE_3_PID		0xDA73	/* NDI future device #3 */
+#define FTDI_NDI_AURORA_SCU_PID		0xDA74	/* NDI Aurora SCU */
+
+/*
+ * ChamSys Limited (www.chamsys.co.uk) USB wing/interface product IDs
+ */
+#define FTDI_CHAMSYS_24_MASTER_WING_PID        0xDAF8
+#define FTDI_CHAMSYS_PC_WING_PID       0xDAF9
+#define FTDI_CHAMSYS_USB_DMX_PID       0xDAFA
+#define FTDI_CHAMSYS_MIDI_TIMECODE_PID 0xDAFB
+#define FTDI_CHAMSYS_MINI_WING_PID     0xDAFC
+#define FTDI_CHAMSYS_MAXI_WING_PID     0xDAFD
+#define FTDI_CHAMSYS_MEDIA_WING_PID    0xDAFE
+#define FTDI_CHAMSYS_WING_PID  0xDAFF
+
+/*
+ * Westrex International devices submitted by Cory Lee
+ */
+#define FTDI_WESTREX_MODEL_777_PID	0xDC00	/* Model 777 */
+#define FTDI_WESTREX_MODEL_8900F_PID	0xDC01	/* Model 8900F */
+
+/*
+ * ACG Identification Technologies GmbH products (http://www.acg.de/).
+ * Submitted by anton -at- goto10 -dot- org.
+ */
+#define FTDI_ACG_HFDUAL_PID		0xDD20	/* HF Dual ISO Reader (RFID) */
+
+/*
+ * Definitions for Artemis astronomical USB based cameras
+ * Check it at http://www.artemisccd.co.uk/
+ */
+#define FTDI_ARTEMIS_PID	0xDF28	/* All Artemis Cameras */
+
+/*
+ * Definitions for ATIK Instruments astronomical USB based cameras
+ * Check it at http://www.atik-instruments.com/
+ */
+#define FTDI_ATIK_ATK16_PID	0xDF30	/* ATIK ATK-16 Grayscale Camera */
+#define FTDI_ATIK_ATK16C_PID	0xDF32	/* ATIK ATK-16C Colour Camera */
+#define FTDI_ATIK_ATK16HR_PID	0xDF31	/* ATIK ATK-16HR Grayscale Camera */
+#define FTDI_ATIK_ATK16HRC_PID	0xDF33	/* ATIK ATK-16HRC Colour Camera */
+#define FTDI_ATIK_ATK16IC_PID   0xDF35  /* ATIK ATK-16IC Grayscale Camera */
+
+/*
+ * Yost Engineering, Inc. products (www.yostengineering.com).
+ * PID 0xE050 submitted by Aaron Prose.
+ */
+#define FTDI_YEI_SERVOCENTER31_PID	0xE050	/* YEI ServoCenter3.1 USB */
+
+/*
+ * ELV USB devices submitted by Christian Abt of ELV (www.elv.de).
+ * All of these devices use FTDI's vendor ID (0x0403).
+ * Further IDs taken from ELV Windows .inf file.
+ *
+ * The previously included PID for the UO 100 module was incorrect.
+ * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58).
+ *
+ * Armin Laeuger originally sent the PID for the UM 100 module.
+ */
+#define FTDI_ELV_USR_PID	0xE000	/* ELV Universal-Sound-Recorder */
+#define FTDI_ELV_MSM1_PID	0xE001	/* ELV Mini-Sound-Modul */
+#define FTDI_ELV_KL100_PID	0xE002	/* ELV Kfz-Leistungsmesser KL 100 */
+#define FTDI_ELV_WS550_PID	0xE004	/* WS 550 */
+#define FTDI_ELV_EC3000_PID	0xE006	/* ENERGY CONTROL 3000 USB */
+#define FTDI_ELV_WS888_PID	0xE008	/* WS 888 */
+#define FTDI_ELV_TWS550_PID	0xE009	/* Technoline WS 550 */
+#define FTDI_ELV_FEM_PID	0xE00A	/* Funk Energie Monitor */
+#define FTDI_ELV_FHZ1300PC_PID	0xE0E8	/* FHZ 1300 PC */
+#define FTDI_ELV_WS500_PID	0xE0E9	/* PC-Wetterstation (WS 500) */
+#define FTDI_ELV_HS485_PID	0xE0EA	/* USB to RS-485 adapter */
+#define FTDI_ELV_UMS100_PID	0xE0EB	/* ELV USB Master-Slave Schaltsteckdose UMS 100 */
+#define FTDI_ELV_TFD128_PID	0xE0EC	/* ELV Temperatur-Feuchte-Datenlogger TFD 128 */
+#define FTDI_ELV_FM3RX_PID	0xE0ED	/* ELV Messwertuebertragung FM3 RX */
+#define FTDI_ELV_WS777_PID	0xE0EE	/* Conrad WS 777 */
+#define FTDI_ELV_EM1010PC_PID	0xE0EF	/* Energy monitor EM 1010 PC */
+#define FTDI_ELV_CSI8_PID	0xE0F0	/* Computer-Schalt-Interface (CSI 8) */
+#define FTDI_ELV_EM1000DL_PID	0xE0F1	/* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */
+#define FTDI_ELV_PCK100_PID	0xE0F2	/* PC-Kabeltester (PCK 100) */
+#define FTDI_ELV_RFP500_PID	0xE0F3	/* HF-Leistungsmesser (RFP 500) */
+#define FTDI_ELV_FS20SIG_PID	0xE0F4	/* Signalgeber (FS 20 SIG) */
+#define FTDI_ELV_UTP8_PID	0xE0F5	/* ELV UTP 8 */
+#define FTDI_ELV_WS300PC_PID	0xE0F6	/* PC-Wetterstation (WS 300 PC) */
+#define FTDI_ELV_WS444PC_PID	0xE0F7	/* Conrad WS 444 PC */
+#define FTDI_PHI_FISCO_PID      0xE40B  /* PHI Fisco USB to Serial cable */
+#define FTDI_ELV_UAD8_PID	0xF068	/* USB-AD-Wandler (UAD 8) */
+#define FTDI_ELV_UDA7_PID	0xF069	/* USB-DA-Wandler (UDA 7) */
+#define FTDI_ELV_USI2_PID	0xF06A	/* USB-Schrittmotoren-Interface (USI 2) */
+#define FTDI_ELV_T1100_PID	0xF06B	/* Thermometer (T 1100) */
+#define FTDI_ELV_PCD200_PID	0xF06C	/* PC-Datenlogger (PCD 200) */
+#define FTDI_ELV_ULA200_PID	0xF06D	/* USB-LCD-Ansteuerung (ULA 200) */
+#define FTDI_ELV_ALC8500_PID	0xF06E	/* ALC 8500 Expert */
+#define FTDI_ELV_FHZ1000PC_PID	0xF06F	/* FHZ 1000 PC */
+#define FTDI_ELV_UR100_PID	0xFB58	/* USB-RS232-Umsetzer (UR 100) */
+#define FTDI_ELV_UM100_PID	0xFB5A	/* USB-Modul UM 100 */
+#define FTDI_ELV_UO100_PID	0xFB5B	/* USB-Modul UO 100 */
+/* Additional ELV PIDs that default to using the FTDI D2XX drivers on
+ * MS Windows, rather than the FTDI Virtual Com Port drivers.
+ * Maybe these will be easier to use with the libftdi/libusb user-space
+ * drivers, or possibly the Comedi drivers in some cases. */
+#define FTDI_ELV_CLI7000_PID	0xFB59	/* Computer-Light-Interface (CLI 7000) */
+#define FTDI_ELV_PPS7330_PID	0xFB5C	/* Processor-Power-Supply (PPS 7330) */
+#define FTDI_ELV_TFM100_PID	0xFB5D	/* Temperatur-Feuchte-Messgeraet (TFM 100) */
+#define FTDI_ELV_UDF77_PID	0xFB5E	/* USB DCF Funkuhr (UDF 77) */
+#define FTDI_ELV_UIO88_PID	0xFB5F	/* USB-I/O Interface (UIO 88) */
+
+/*
+ * EVER Eco Pro UPS (http://www.ever.com.pl/)
+ */
+
+#define	EVER_ECO_PRO_CDS	0xe520	/* RS-232 converter */
+
+/*
+ * Active Robots product ids.
+ */
+#define FTDI_ACTIVE_ROBOTS_PID	0xE548	/* USB comms board */
+
+/* Pyramid Computer GmbH */
+#define FTDI_PYRAMID_PID	0xE6C8	/* Pyramid Appliance Display */
+
+/* www.elsterelectricity.com Elster Unicom III Optical Probe */
+#define FTDI_ELSTER_UNICOM_PID		0xE700 /* Product Id */
+
+/*
+ * Gude Analog- und Digitalsysteme GmbH
+ */
+#define FTDI_GUDEADS_E808_PID    0xE808
+#define FTDI_GUDEADS_E809_PID    0xE809
+#define FTDI_GUDEADS_E80A_PID    0xE80A
+#define FTDI_GUDEADS_E80B_PID    0xE80B
+#define FTDI_GUDEADS_E80C_PID    0xE80C
+#define FTDI_GUDEADS_E80D_PID    0xE80D
+#define FTDI_GUDEADS_E80E_PID    0xE80E
+#define FTDI_GUDEADS_E80F_PID    0xE80F
+#define FTDI_GUDEADS_E888_PID    0xE888  /* Expert ISDN Control USB */
+#define FTDI_GUDEADS_E889_PID    0xE889  /* USB RS-232 OptoBridge */
+#define FTDI_GUDEADS_E88A_PID    0xE88A
+#define FTDI_GUDEADS_E88B_PID    0xE88B
+#define FTDI_GUDEADS_E88C_PID    0xE88C
+#define FTDI_GUDEADS_E88D_PID    0xE88D
+#define FTDI_GUDEADS_E88E_PID    0xE88E
+#define FTDI_GUDEADS_E88F_PID    0xE88F
+
+/*
+ * Eclo (http://www.eclo.pt/) product IDs.
+ * PID 0xEA90 submitted by Martin Grill.
+ */
+#define FTDI_ECLO_COM_1WIRE_PID	0xEA90	/* COM to 1-Wire USB adaptor */
+
+/* TNC-X USB-to-packet-radio adapter, versions prior to 3.0 (DLP module) */
+#define FTDI_TNC_X_PID		0xEBE0
+
+/*
+ * Teratronik product ids.
+ * Submitted by O. Wölfelschneider.
+ */
+#define FTDI_TERATRONIK_VCP_PID	 0xEC88	/* Teratronik device (preferring VCP driver on windows) */
+#define FTDI_TERATRONIK_D2XX_PID 0xEC89	/* Teratronik device (preferring D2XX driver on windows) */
+
+/* Rig Expert Ukraine devices */
+#define FTDI_REU_TINY_PID		0xED22	/* RigExpert Tiny */
+
+/*
+ * Hameg HO820 and HO870 interface (using VID 0x0403)
+ */
+#define HAMEG_HO820_PID			0xed74
+#define HAMEG_HO730_PID			0xed73
+#define HAMEG_HO720_PID			0xed72
+#define HAMEG_HO870_PID			0xed71
+
+/*
+ *  MaxStream devices	www.maxstream.net
+ */
+#define FTDI_MAXSTREAM_PID	0xEE18	/* Xbee PKG-U Module */
+
+/*
+ * microHAM product IDs (http://www.microham.com).
+ * Submitted by Justin Burket (KL1RL) <zorton@jtan.com>
+ * and Mike Studer (K6EEP) <k6eep@hamsoftware.org>.
+ * Ian Abbott <abbotti@mev.co.uk> added a few more from the driver INF file.
+ */
+#define FTDI_MHAM_KW_PID	0xEEE8	/* USB-KW interface */
+#define FTDI_MHAM_YS_PID	0xEEE9	/* USB-YS interface */
+#define FTDI_MHAM_Y6_PID	0xEEEA	/* USB-Y6 interface */
+#define FTDI_MHAM_Y8_PID	0xEEEB	/* USB-Y8 interface */
+#define FTDI_MHAM_IC_PID	0xEEEC	/* USB-IC interface */
+#define FTDI_MHAM_DB9_PID	0xEEED	/* USB-DB9 interface */
+#define FTDI_MHAM_RS232_PID	0xEEEE	/* USB-RS232 interface */
+#define FTDI_MHAM_Y9_PID	0xEEEF	/* USB-Y9 interface */
+
+/* Domintell products  http://www.domintell.com */
+#define FTDI_DOMINTELL_DGQG_PID	0xEF50	/* Master */
+#define FTDI_DOMINTELL_DUSB_PID	0xEF51	/* DUSB01 module */
+
+/*
+ * The following are the values for the Perle Systems
+ * UltraPort USB serial converters
+ */
+#define FTDI_PERLE_ULTRAPORT_PID 0xF0C0	/* Perle UltraPort Product Id */
+
+/* Sprog II (Andrew Crosland's SprogII DCC interface) */
+#define FTDI_SPROG_II		0xF0C8
+
+/* an infrared receiver for user access control with IR tags */
+#define FTDI_PIEGROUP_PID	0xF208	/* Product Id */
+
+/* ACT Solutions HomePro ZWave interface
+   (http://www.act-solutions.com/HomePro-Product-Matrix.html) */
+#define FTDI_ACTZWAVE_PID	0xF2D0
+
+/*
+ * 4N-GALAXY.DE PIDs for CAN-USB, USB-RS232, USB-RS422, USB-RS485,
+ * USB-TTY aktiv, USB-TTY passiv.  Some PIDs are used by several devices
+ * and I'm not entirely sure which are used by which.
+ */
+#define FTDI_4N_GALAXY_DE_1_PID	0xF3C0
+#define FTDI_4N_GALAXY_DE_2_PID	0xF3C1
+#define FTDI_4N_GALAXY_DE_3_PID	0xF3C2
+
+/*
+ * Linx Technologies product ids
+ */
+#define LINX_SDMUSBQSS_PID	0xF448	/* Linx SDM-USB-QS-S */
+#define LINX_MASTERDEVEL2_PID   0xF449	/* Linx Master Development 2.0 */
+#define LINX_FUTURE_0_PID   0xF44A	/* Linx future device */
+#define LINX_FUTURE_1_PID   0xF44B	/* Linx future device */
+#define LINX_FUTURE_2_PID   0xF44C	/* Linx future device */
+
+/*
+ * Oceanic product ids
+ */
+#define FTDI_OCEANIC_PID	0xF460  /* Oceanic dive instrument */
+
+/*
+ * SUUNTO product ids
+ */
+#define FTDI_SUUNTO_SPORTS_PID	0xF680	/* Suunto Sports instrument */
+
+/* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */
+/* http://www.usbuirt.com/ */
+#define FTDI_USB_UIRT_PID	0xF850	/* Product Id */
+
+/* CCS Inc. ICDU/ICDU40 product ID -
+ * the FT232BM is used in an in-circuit-debugger unit for PIC16's/PIC18's */
+#define FTDI_CCSICDU20_0_PID    0xF9D0
+#define FTDI_CCSICDU40_1_PID    0xF9D1
+#define FTDI_CCSMACHX_2_PID     0xF9D2
+#define FTDI_CCSLOAD_N_GO_3_PID 0xF9D3
+#define FTDI_CCSICDU64_4_PID    0xF9D4
+#define FTDI_CCSPRIME8_5_PID    0xF9D5
+
+/*
+ * The following are the values for the Matrix Orbital LCD displays,
+ * which are the FT232BM ( similar to the 8U232AM )
+ */
+#define FTDI_MTXORB_0_PID      0xFA00  /* Matrix Orbital Product Id */
+#define FTDI_MTXORB_1_PID      0xFA01  /* Matrix Orbital Product Id */
+#define FTDI_MTXORB_2_PID      0xFA02  /* Matrix Orbital Product Id */
+#define FTDI_MTXORB_3_PID      0xFA03  /* Matrix Orbital Product Id */
+#define FTDI_MTXORB_4_PID      0xFA04  /* Matrix Orbital Product Id */
+#define FTDI_MTXORB_5_PID      0xFA05  /* Matrix Orbital Product Id */
+#define FTDI_MTXORB_6_PID      0xFA06  /* Matrix Orbital Product Id */
+
+/*
+ * Home Electronics (www.home-electro.com) USB gadgets
+ */
+#define FTDI_HE_TIRA1_PID	0xFA78	/* Tira-1 IR transceiver */
+
+/* Inside Accesso contactless reader (http://www.insidecontactless.com/) */
+#define INSIDE_ACCESSO		0xFAD0
+
+/*
+ * ThorLabs USB motor drivers
+ */
+#define FTDI_THORLABS_PID		0xfaf0 /* ThorLabs USB motor drivers */
+
+/*
+ * Protego product ids
+ */
+#define PROTEGO_SPECIAL_1	0xFC70	/* special/unknown device */
+#define PROTEGO_R2X0		0xFC71	/* R200-USB TRNG unit (R210, R220, and R230) */
+#define PROTEGO_SPECIAL_3	0xFC72	/* special/unknown device */
+#define PROTEGO_SPECIAL_4	0xFC73	/* special/unknown device */
+
+/*
+ * Sony Ericsson product ids
+ */
+#define FTDI_DSS20_PID		0xFC82	/* DSS-20 Sync Station for Sony Ericsson P800 */
+#define FTDI_URBAN_0_PID	0xFC8A	/* Sony Ericsson Urban, uart #0 */
+#define FTDI_URBAN_1_PID	0xFC8B	/* Sony Ericsson Urban, uart #1 */
+
+/* www.irtrans.de device */
+#define FTDI_IRTRANS_PID 0xFC60 /* Product Id */
+
+/*
+ * RM Michaelides CANview USB (http://www.rmcan.com) (FTDI_VID)
+ * CAN fieldbus interface adapter, added by port GmbH www.port.de)
+ * Ian Abbott changed the macro names for consistency.
+ */
+#define FTDI_RM_CANVIEW_PID	0xfd60	/* Product Id */
+/* www.thoughttechnology.com/ TT-USB provide with procomp use ftdi_sio */
+#define FTDI_TTUSB_PID 0xFF20 /* Product Id */
+
+#define FTDI_USBX_707_PID 0xF857	/* ADSTech IR Blaster USBX-707 (FTDI_VID) */
+
+#define FTDI_RELAIS_PID	0xFA10  /* Relais device from Rudolf Gugler */
+
+/*
+ * PCDJ use ftdi based dj-controllers. The following PID is
+ * for their DAC-2 device http://www.pcdjhardware.com/DAC2.asp
+ * (the VID is the standard ftdi vid (FTDI_VID), PID sent by Wouter Paesen)
+ */
+#define FTDI_PCDJ_DAC2_PID 0xFA88
+
+#define FTDI_R2000KU_TRUE_RNG	0xFB80  /* R2000KU TRUE RNG (FTDI_VID) */
+
+/*
+ * DIEBOLD BCS SE923 (FTDI_VID)
+ */
+#define DIEBOLD_BCS_SE923_PID	0xfb99
+
+/* www.crystalfontz.com devices
+ * - thanx for providing free devices for evaluation !
+ * they use the ftdi chipset for the USB interface
+ * and the vendor id is the same
+ */
+#define FTDI_XF_632_PID 0xFC08	/* 632: 16x2 Character Display */
+#define FTDI_XF_634_PID 0xFC09	/* 634: 20x4 Character Display */
+#define FTDI_XF_547_PID 0xFC0A	/* 547: Two line Display */
+#define FTDI_XF_633_PID 0xFC0B	/* 633: 16x2 Character Display with Keys */
+#define FTDI_XF_631_PID 0xFC0C	/* 631: 20x2 Character Display */
+#define FTDI_XF_635_PID 0xFC0D	/* 635: 20x4 Character Display */
+#define FTDI_XF_640_PID 0xFC0E	/* 640: Two line Display */
+#define FTDI_XF_642_PID 0xFC0F	/* 642: Two line Display */
+
+/*
+ * Video Networks Limited / Homechoice in the UK use an ftdi-based device
+ * for their 1Mb broadband internet service.  The following PID is exhibited
+ * by the usb device supplied (the VID is the standard ftdi vid (FTDI_VID)
+ */
+#define FTDI_VNHCPCUSB_D_PID 0xfe38 /* Product Id */
+
+/* AlphaMicro Components AMC-232USB01 device (FTDI_VID) */
+#define FTDI_AMC232_PID 0xFF00 /* Product Id */
+
+/*
+ * IBS elektronik product ids (FTDI_VID)
+ * Submitted by Thomas Schleusener
+ */
+#define FTDI_IBS_US485_PID	0xff38  /* IBS US485 (USB<-->RS422/485 interface) */
+#define FTDI_IBS_PICPRO_PID	0xff39  /* IBS PIC-Programmer */
+#define FTDI_IBS_PCMCIA_PID	0xff3a  /* IBS Card reader for PCMCIA SRAM-cards */
+#define FTDI_IBS_PK1_PID	0xff3b  /* IBS PK1 - Particel counter */
+#define FTDI_IBS_RS232MON_PID	0xff3c  /* IBS RS232 - Monitor */
+#define FTDI_IBS_APP70_PID	0xff3d  /* APP 70 (dust monitoring system) */
+#define FTDI_IBS_PEDO_PID	0xff3e  /* IBS PEDO-Modem (RF modem 868.35 MHz) */
+#define FTDI_IBS_PROD_PID	0xff3f  /* future device */
+/* www.canusb.com Lawicel CANUSB device (FTDI_VID) */
+#define FTDI_CANUSB_PID 0xFFA8 /* Product Id */
+
+/*
+ * TavIR AVR product ids (FTDI_VID)
+ */
+#define FTDI_TAVIR_STK500_PID	0xFA33	/* STK500 AVR programmer */
+
+/*
+ * TIAO product ids (FTDI_VID)
+ * http://www.tiaowiki.com/w/Main_Page
+ */
+#define FTDI_TIAO_UMPA_PID	0x8a98	/* TIAO/DIYGADGET USB Multi-Protocol Adapter */
+
+
+/********************************/
+/** third-party VID/PID combos **/
+/********************************/
+
+
+
+/*
+ * Atmel STK541
+ */
+#define ATMEL_VID		0x03eb /* Vendor ID */
+#define STK541_PID		0x2109 /* Zigbee Controller */
+
+/*
+ * Blackfin gnICE JTAG
+ * http://docs.blackfin.uclinux.org/doku.php?id=hw:jtag:gnice
+ */
+#define ADI_VID			0x0456
+#define ADI_GNICE_PID		0xF000
+#define ADI_GNICEPLUS_PID	0xF001
+
+/*
+ * Microchip Technology, Inc.
+ *
+ * MICROCHIP_VID (0x04D8) and MICROCHIP_USB_BOARD_PID (0x000A) are
+ * used by single function CDC ACM class based firmware demo
+ * applications.  The VID/PID has also been used in firmware
+ * emulating FTDI serial chips by:
+ * Hornby Elite - Digital Command Control Console
+ * http://www.hornby.com/hornby-dcc/controllers/
+ */
+#define MICROCHIP_VID		0x04D8
+#define MICROCHIP_USB_BOARD_PID	0x000A /* CDC RS-232 Emulation Demo */
+
+/*
+ * RATOC REX-USB60F
+ */
+#define RATOC_VENDOR_ID		0x0584
+#define RATOC_PRODUCT_ID_USB60F	0xb020
+
+/*
+ * Acton Research Corp.
+ */
+#define ACTON_VID		0x0647	/* Vendor ID */
+#define ACTON_SPECTRAPRO_PID	0x0100
+
+/*
+ * Contec products (http://www.contec.com)
+ * Submitted by Daniel Sangorrin
+ */
+#define CONTEC_VID		0x06CE	/* Vendor ID */
+#define CONTEC_COM1USBH_PID	0x8311	/* COM-1(USB)H */
+
+/*
+ * Definitions for B&B Electronics products.
+ */
+#define BANDB_VID		0x0856	/* B&B Electronics Vendor ID */
+#define BANDB_USOTL4_PID	0xAC01	/* USOTL4 Isolated RS-485 Converter */
+#define BANDB_USTL4_PID		0xAC02	/* USTL4 RS-485 Converter */
+#define BANDB_USO9ML2_PID	0xAC03	/* USO9ML2 Isolated RS-232 Converter */
+#define BANDB_USOPTL4_PID	0xAC11
+#define BANDB_USPTL4_PID	0xAC12
+#define BANDB_USO9ML2DR_2_PID	0xAC16
+#define BANDB_USO9ML2DR_PID	0xAC17
+#define BANDB_USOPTL4DR2_PID	0xAC18	/* USOPTL4R-2 2-port Isolated RS-232 Converter */
+#define BANDB_USOPTL4DR_PID	0xAC19
+#define BANDB_485USB9F_2W_PID	0xAC25
+#define BANDB_485USB9F_4W_PID	0xAC26
+#define BANDB_232USB9M_PID	0xAC27
+#define BANDB_485USBTB_2W_PID	0xAC33
+#define BANDB_485USBTB_4W_PID	0xAC34
+#define BANDB_TTL5USB9M_PID	0xAC49
+#define BANDB_TTL3USB9M_PID	0xAC50
+#define BANDB_ZZ_PROG1_USB_PID	0xBA02
+
+/*
+ * Intrepid Control Systems (http://www.intrepidcs.com/) ValueCAN and NeoVI
+ */
+#define INTREPID_VID		0x093C
+#define INTREPID_VALUECAN_PID	0x0601
+#define INTREPID_NEOVI_PID	0x0701
+
+/*
+ * Definitions for ID TECH (www.idt-net.com) devices
+ */
+#define IDTECH_VID		0x0ACD	/* ID TECH Vendor ID */
+#define IDTECH_IDT1221U_PID	0x0300	/* IDT1221U USB to RS-232 adapter */
+
+/*
+ * Definitions for Omnidirectional Control Technology, Inc. devices
+ */
+#define OCT_VID			0x0B39	/* OCT vendor ID */
+/* Note: OCT US101 is also rebadged as Dick Smith Electronics (NZ) XH6381 */
+/* Also rebadged as Dick Smith Electronics (Aus) XH6451 */
+/* Also rebadged as SIIG Inc. model US2308 hardware version 1 */
+#define OCT_DK201_PID		0x0103	/* OCT DK201 USB docking station */
+#define OCT_US101_PID		0x0421	/* OCT US101 USB to RS-232 */
+
+/*
+ * Definitions for Icom Inc. devices
+ */
+#define ICOM_VID		0x0C26 /* Icom vendor ID */
+/* Note: ID-1 is a communications tranceiver for HAM-radio operators */
+#define ICOM_ID_1_PID		0x0004 /* ID-1 USB to RS-232 */
+/* Note: OPC is an Optional cable to connect an Icom Tranceiver */
+#define ICOM_OPC_U_UC_PID	0x0018 /* OPC-478UC, OPC-1122U cloning cable */
+/* Note: ID-RP* devices are Icom Repeater Devices for HAM-radio */
+#define ICOM_ID_RP2C1_PID	0x0009 /* ID-RP2C Asset 1 to RS-232 */
+#define ICOM_ID_RP2C2_PID	0x000A /* ID-RP2C Asset 2 to RS-232 */
+#define ICOM_ID_RP2D_PID	0x000B /* ID-RP2D configuration port*/
+#define ICOM_ID_RP2VT_PID	0x000C /* ID-RP2V Transmit config port */
+#define ICOM_ID_RP2VR_PID	0x000D /* ID-RP2V Receive config port */
+#define ICOM_ID_RP4KVT_PID	0x0010 /* ID-RP4000V Transmit config port */
+#define ICOM_ID_RP4KVR_PID	0x0011 /* ID-RP4000V Receive config port */
+#define ICOM_ID_RP2KVT_PID	0x0012 /* ID-RP2000V Transmit config port */
+#define ICOM_ID_RP2KVR_PID	0x0013 /* ID-RP2000V Receive config port */
+
+/*
+ * GN Otometrics (http://www.otometrics.com)
+ * Submitted by Ville Sundberg.
+ */
+#define GN_OTOMETRICS_VID	0x0c33	/* Vendor ID */
+#define AURICAL_USB_PID		0x0010	/* Aurical USB Audiometer */
+
+/*
+ * The following are the values for the Sealevel SeaLINK+ adapters.
+ * (Original list sent by Tuan Hoang.  Ian Abbott renamed the macros and
+ * removed some PIDs that don't seem to match any existing products.)
+ */
+#define SEALEVEL_VID		0x0c52	/* Sealevel Vendor ID */
+#define SEALEVEL_2101_PID	0x2101	/* SeaLINK+232 (2101/2105) */
+#define SEALEVEL_2102_PID	0x2102	/* SeaLINK+485 (2102) */
+#define SEALEVEL_2103_PID	0x2103	/* SeaLINK+232I (2103) */
+#define SEALEVEL_2104_PID	0x2104	/* SeaLINK+485I (2104) */
+#define SEALEVEL_2106_PID	0x9020	/* SeaLINK+422 (2106) */
+#define SEALEVEL_2201_1_PID	0x2211	/* SeaPORT+2/232 (2201) Port 1 */
+#define SEALEVEL_2201_2_PID	0x2221	/* SeaPORT+2/232 (2201) Port 2 */
+#define SEALEVEL_2202_1_PID	0x2212	/* SeaPORT+2/485 (2202) Port 1 */
+#define SEALEVEL_2202_2_PID	0x2222	/* SeaPORT+2/485 (2202) Port 2 */
+#define SEALEVEL_2203_1_PID	0x2213	/* SeaPORT+2 (2203) Port 1 */
+#define SEALEVEL_2203_2_PID	0x2223	/* SeaPORT+2 (2203) Port 2 */
+#define SEALEVEL_2401_1_PID	0x2411	/* SeaPORT+4/232 (2401) Port 1 */
+#define SEALEVEL_2401_2_PID	0x2421	/* SeaPORT+4/232 (2401) Port 2 */
+#define SEALEVEL_2401_3_PID	0x2431	/* SeaPORT+4/232 (2401) Port 3 */
+#define SEALEVEL_2401_4_PID	0x2441	/* SeaPORT+4/232 (2401) Port 4 */
+#define SEALEVEL_2402_1_PID	0x2412	/* SeaPORT+4/485 (2402) Port 1 */
+#define SEALEVEL_2402_2_PID	0x2422	/* SeaPORT+4/485 (2402) Port 2 */
+#define SEALEVEL_2402_3_PID	0x2432	/* SeaPORT+4/485 (2402) Port 3 */
+#define SEALEVEL_2402_4_PID	0x2442	/* SeaPORT+4/485 (2402) Port 4 */
+#define SEALEVEL_2403_1_PID	0x2413	/* SeaPORT+4 (2403) Port 1 */
+#define SEALEVEL_2403_2_PID	0x2423	/* SeaPORT+4 (2403) Port 2 */
+#define SEALEVEL_2403_3_PID	0x2433	/* SeaPORT+4 (2403) Port 3 */
+#define SEALEVEL_2403_4_PID	0x2443	/* SeaPORT+4 (2403) Port 4 */
+#define SEALEVEL_2801_1_PID	0X2811	/* SeaLINK+8/232 (2801) Port 1 */
+#define SEALEVEL_2801_2_PID	0X2821	/* SeaLINK+8/232 (2801) Port 2 */
+#define SEALEVEL_2801_3_PID	0X2831	/* SeaLINK+8/232 (2801) Port 3 */
+#define SEALEVEL_2801_4_PID	0X2841	/* SeaLINK+8/232 (2801) Port 4 */
+#define SEALEVEL_2801_5_PID	0X2851	/* SeaLINK+8/232 (2801) Port 5 */
+#define SEALEVEL_2801_6_PID	0X2861	/* SeaLINK+8/232 (2801) Port 6 */
+#define SEALEVEL_2801_7_PID	0X2871	/* SeaLINK+8/232 (2801) Port 7 */
+#define SEALEVEL_2801_8_PID	0X2881	/* SeaLINK+8/232 (2801) Port 8 */
+#define SEALEVEL_2802_1_PID	0X2812	/* SeaLINK+8/485 (2802) Port 1 */
+#define SEALEVEL_2802_2_PID	0X2822	/* SeaLINK+8/485 (2802) Port 2 */
+#define SEALEVEL_2802_3_PID	0X2832	/* SeaLINK+8/485 (2802) Port 3 */
+#define SEALEVEL_2802_4_PID	0X2842	/* SeaLINK+8/485 (2802) Port 4 */
+#define SEALEVEL_2802_5_PID	0X2852	/* SeaLINK+8/485 (2802) Port 5 */
+#define SEALEVEL_2802_6_PID	0X2862	/* SeaLINK+8/485 (2802) Port 6 */
+#define SEALEVEL_2802_7_PID	0X2872	/* SeaLINK+8/485 (2802) Port 7 */
+#define SEALEVEL_2802_8_PID	0X2882	/* SeaLINK+8/485 (2802) Port 8 */
+#define SEALEVEL_2803_1_PID	0X2813	/* SeaLINK+8 (2803) Port 1 */
+#define SEALEVEL_2803_2_PID	0X2823	/* SeaLINK+8 (2803) Port 2 */
+#define SEALEVEL_2803_3_PID	0X2833	/* SeaLINK+8 (2803) Port 3 */
+#define SEALEVEL_2803_4_PID	0X2843	/* SeaLINK+8 (2803) Port 4 */
+#define SEALEVEL_2803_5_PID	0X2853	/* SeaLINK+8 (2803) Port 5 */
+#define SEALEVEL_2803_6_PID	0X2863	/* SeaLINK+8 (2803) Port 6 */
+#define SEALEVEL_2803_7_PID	0X2873	/* SeaLINK+8 (2803) Port 7 */
+#define SEALEVEL_2803_8_PID	0X2883	/* SeaLINK+8 (2803) Port 8 */
+#define SEALEVEL_2803R_1_PID	0Xa02a	/* SeaLINK+8 (2803-ROHS) Port 1+2 */
+#define SEALEVEL_2803R_2_PID	0Xa02b	/* SeaLINK+8 (2803-ROHS) Port 3+4 */
+#define SEALEVEL_2803R_3_PID	0Xa02c	/* SeaLINK+8 (2803-ROHS) Port 5+6 */
+#define SEALEVEL_2803R_4_PID	0Xa02d	/* SeaLINK+8 (2803-ROHS) Port 7+8 */
+
+/*
+ * JETI SPECTROMETER SPECBOS 1201
+ * http://www.jeti.com/cms/index.php/instruments/other-instruments/specbos-2101
+ */
+#define JETI_VID		0x0c6c
+#define JETI_SPC1201_PID	0x04b2
+
+/*
+ * FTDI USB UART chips used in construction projects from the
+ * Elektor Electronics magazine (http://www.elektor.com/)
+ */
+#define ELEKTOR_VID		0x0C7D
+#define ELEKTOR_FT323R_PID	0x0005	/* RFID-Reader, issue 09-2006 */
+
+/*
+ * Posiflex inc retail equipment (http://www.posiflex.com.tw)
+ */
+#define POSIFLEX_VID		0x0d3a  /* Vendor ID */
+#define POSIFLEX_PP7000_PID	0x0300  /* PP-7000II thermal printer */
+
+/*
+ * The following are the values for two KOBIL chipcard terminals.
+ */
+#define KOBIL_VID		0x0d46	/* KOBIL Vendor ID */
+#define KOBIL_CONV_B1_PID	0x2020	/* KOBIL Konverter for B1 */
+#define KOBIL_CONV_KAAN_PID	0x2021	/* KOBIL_Konverter for KAAN */
+
+#define FTDI_NF_RIC_VID	0x0DCD	/* Vendor Id */
+#define FTDI_NF_RIC_PID	0x0001	/* Product Id */
+
+/*
+ * Falcom Wireless Communications GmbH
+ */
+#define FALCOM_VID		0x0F94	/* Vendor Id */
+#define FALCOM_TWIST_PID	0x0001	/* Falcom Twist USB GPRS modem */
+#define FALCOM_SAMBA_PID	0x0005	/* Falcom Samba USB GPRS modem */
+
+/* Larsen and Brusgaard AltiTrack/USBtrack */
+#define LARSENBRUSGAARD_VID		0x0FD8
+#define LB_ALTITRACK_PID		0x0001
+
+/*
+ * TTi (Thurlby Thandar Instruments)
+ */
+#define TTI_VID			0x103E	/* Vendor Id */
+#define TTI_QL355P_PID		0x03E8	/* TTi QL355P power supply */
+
+/* Interbiometrics USB I/O Board */
+/* Developed for Interbiometrics by Rudolf Gugler */
+#define INTERBIOMETRICS_VID              0x1209
+#define INTERBIOMETRICS_IOBOARD_PID      0x1002
+#define INTERBIOMETRICS_MINI_IOBOARD_PID 0x1006
+
+/*
+ * Testo products (http://www.testo.com/)
+ * Submitted by Colin Leroy
+ */
+#define TESTO_VID			0x128D
+#define TESTO_USB_INTERFACE_PID		0x0001
+
+/*
+ * Mobility Electronics products.
+ */
+#define MOBILITY_VID			0x1342
+#define MOBILITY_USB_SERIAL_PID		0x0202	/* EasiDock USB 200 serial */
+
+/*
+ * FIC / OpenMoko, Inc. http://wiki.openmoko.org/wiki/Neo1973_Debug_Board_v3
+ * Submitted by Harald Welte <laforge@openmoko.org>
+ */
+#define	FIC_VID			0x1457
+#define	FIC_NEO1973_DEBUG_PID	0x5118
+
+/* Olimex */
+#define OLIMEX_VID			0x15BA
+#define OLIMEX_ARM_USB_OCD_PID		0x0003
+#define OLIMEX_ARM_USB_OCD_H_PID	0x002b
+
+/*
+ * Telldus Technologies
+ */
+#define TELLDUS_VID			0x1781	/* Vendor ID */
+#define TELLDUS_TELLSTICK_PID		0x0C30	/* RF control dongle 433 MHz using FT232RL */
+
+/*
+ * RT Systems programming cables for various ham radios
+ */
+#define RTSYSTEMS_VID			0x2100	/* Vendor ID */
+#define RTSYSTEMS_SERIAL_VX7_PID	0x9e52	/* Serial converter for VX-7 Radios using FT232RL */
+#define RTSYSTEMS_CT29B_PID		0x9e54	/* CT29B Radio Cable */
+#define RTSYSTEMS_RTS01_PID		0x9e57	/* USB-RTS01 Radio Cable */
+
+
+/*
+ * Physik Instrumente
+ * http://www.physikinstrumente.com/en/products/
+ */
+/* These two devices use the VID of FTDI */
+#define PI_C865_PID	0xe0a0  /* PI C-865 Piezomotor Controller */
+#define PI_C857_PID	0xe0a1  /* PI Encoder Trigger Box */
+
+#define PI_VID              0x1a72  /* Vendor ID */
+#define PI_C866_PID	0x1000  /* PI C-866 Piezomotor Controller */
+#define PI_C663_PID	0x1001  /* PI C-663 Mercury-Step */
+#define PI_C725_PID	0x1002  /* PI C-725 Piezomotor Controller */
+#define PI_E517_PID	0x1005  /* PI E-517 Digital Piezo Controller Operation Module */
+#define PI_C863_PID	0x1007  /* PI C-863 */
+#define PI_E861_PID	0x1008  /* PI E-861 Piezomotor Controller */
+#define PI_C867_PID	0x1009  /* PI C-867 Piezomotor Controller */
+#define PI_E609_PID	0x100D  /* PI E-609 Digital Piezo Controller */
+#define PI_E709_PID	0x100E  /* PI E-709 Digital Piezo Controller */
+#define PI_100F_PID	0x100F  /* PI Digital Piezo Controller */
+#define PI_1011_PID	0x1011  /* PI Digital Piezo Controller */
+#define PI_1012_PID	0x1012  /* PI Motion Controller */
+#define PI_1013_PID	0x1013  /* PI Motion Controller */
+#define PI_1014_PID	0x1014  /* PI Device */
+#define PI_1015_PID	0x1015  /* PI Device */
+#define PI_1016_PID	0x1016  /* PI Digital Servo Module */
+
+/*
+ * Kondo Kagaku Co.Ltd.
+ * http://www.kondo-robot.com/EN
+ */
+#define KONDO_VID 		0x165c
+#define KONDO_USB_SERIAL_PID	0x0002
+
+/*
+ * Bayer Ascensia Contour blood glucose meter USB-converter cable.
+ * http://winglucofacts.com/cables/
+ */
+#define BAYER_VID                      0x1A79
+#define BAYER_CONTOUR_CABLE_PID        0x6001
+
+/*
+ * The following are the values for the Matrix Orbital FTDI Range
+ * Anything in this range will use an FT232RL.
+ */
+#define MTXORB_VID			0x1B3D
+#define MTXORB_FTDI_RANGE_0100_PID	0x0100
+#define MTXORB_FTDI_RANGE_0101_PID	0x0101
+#define MTXORB_FTDI_RANGE_0102_PID	0x0102
+#define MTXORB_FTDI_RANGE_0103_PID	0x0103
+#define MTXORB_FTDI_RANGE_0104_PID	0x0104
+#define MTXORB_FTDI_RANGE_0105_PID	0x0105
+#define MTXORB_FTDI_RANGE_0106_PID	0x0106
+#define MTXORB_FTDI_RANGE_0107_PID	0x0107
+#define MTXORB_FTDI_RANGE_0108_PID	0x0108
+#define MTXORB_FTDI_RANGE_0109_PID	0x0109
+#define MTXORB_FTDI_RANGE_010A_PID	0x010A
+#define MTXORB_FTDI_RANGE_010B_PID	0x010B
+#define MTXORB_FTDI_RANGE_010C_PID	0x010C
+#define MTXORB_FTDI_RANGE_010D_PID	0x010D
+#define MTXORB_FTDI_RANGE_010E_PID	0x010E
+#define MTXORB_FTDI_RANGE_010F_PID	0x010F
+#define MTXORB_FTDI_RANGE_0110_PID	0x0110
+#define MTXORB_FTDI_RANGE_0111_PID	0x0111
+#define MTXORB_FTDI_RANGE_0112_PID	0x0112
+#define MTXORB_FTDI_RANGE_0113_PID	0x0113
+#define MTXORB_FTDI_RANGE_0114_PID	0x0114
+#define MTXORB_FTDI_RANGE_0115_PID	0x0115
+#define MTXORB_FTDI_RANGE_0116_PID	0x0116
+#define MTXORB_FTDI_RANGE_0117_PID	0x0117
+#define MTXORB_FTDI_RANGE_0118_PID	0x0118
+#define MTXORB_FTDI_RANGE_0119_PID	0x0119
+#define MTXORB_FTDI_RANGE_011A_PID	0x011A
+#define MTXORB_FTDI_RANGE_011B_PID	0x011B
+#define MTXORB_FTDI_RANGE_011C_PID	0x011C
+#define MTXORB_FTDI_RANGE_011D_PID	0x011D
+#define MTXORB_FTDI_RANGE_011E_PID	0x011E
+#define MTXORB_FTDI_RANGE_011F_PID	0x011F
+#define MTXORB_FTDI_RANGE_0120_PID	0x0120
+#define MTXORB_FTDI_RANGE_0121_PID	0x0121
+#define MTXORB_FTDI_RANGE_0122_PID	0x0122
+#define MTXORB_FTDI_RANGE_0123_PID	0x0123
+#define MTXORB_FTDI_RANGE_0124_PID	0x0124
+#define MTXORB_FTDI_RANGE_0125_PID	0x0125
+#define MTXORB_FTDI_RANGE_0126_PID	0x0126
+#define MTXORB_FTDI_RANGE_0127_PID	0x0127
+#define MTXORB_FTDI_RANGE_0128_PID	0x0128
+#define MTXORB_FTDI_RANGE_0129_PID	0x0129
+#define MTXORB_FTDI_RANGE_012A_PID	0x012A
+#define MTXORB_FTDI_RANGE_012B_PID	0x012B
+#define MTXORB_FTDI_RANGE_012C_PID	0x012C
+#define MTXORB_FTDI_RANGE_012D_PID	0x012D
+#define MTXORB_FTDI_RANGE_012E_PID	0x012E
+#define MTXORB_FTDI_RANGE_012F_PID	0x012F
+#define MTXORB_FTDI_RANGE_0130_PID	0x0130
+#define MTXORB_FTDI_RANGE_0131_PID	0x0131
+#define MTXORB_FTDI_RANGE_0132_PID	0x0132
+#define MTXORB_FTDI_RANGE_0133_PID	0x0133
+#define MTXORB_FTDI_RANGE_0134_PID	0x0134
+#define MTXORB_FTDI_RANGE_0135_PID	0x0135
+#define MTXORB_FTDI_RANGE_0136_PID	0x0136
+#define MTXORB_FTDI_RANGE_0137_PID	0x0137
+#define MTXORB_FTDI_RANGE_0138_PID	0x0138
+#define MTXORB_FTDI_RANGE_0139_PID	0x0139
+#define MTXORB_FTDI_RANGE_013A_PID	0x013A
+#define MTXORB_FTDI_RANGE_013B_PID	0x013B
+#define MTXORB_FTDI_RANGE_013C_PID	0x013C
+#define MTXORB_FTDI_RANGE_013D_PID	0x013D
+#define MTXORB_FTDI_RANGE_013E_PID	0x013E
+#define MTXORB_FTDI_RANGE_013F_PID	0x013F
+#define MTXORB_FTDI_RANGE_0140_PID	0x0140
+#define MTXORB_FTDI_RANGE_0141_PID	0x0141
+#define MTXORB_FTDI_RANGE_0142_PID	0x0142
+#define MTXORB_FTDI_RANGE_0143_PID	0x0143
+#define MTXORB_FTDI_RANGE_0144_PID	0x0144
+#define MTXORB_FTDI_RANGE_0145_PID	0x0145
+#define MTXORB_FTDI_RANGE_0146_PID	0x0146
+#define MTXORB_FTDI_RANGE_0147_PID	0x0147
+#define MTXORB_FTDI_RANGE_0148_PID	0x0148
+#define MTXORB_FTDI_RANGE_0149_PID	0x0149
+#define MTXORB_FTDI_RANGE_014A_PID	0x014A
+#define MTXORB_FTDI_RANGE_014B_PID	0x014B
+#define MTXORB_FTDI_RANGE_014C_PID	0x014C
+#define MTXORB_FTDI_RANGE_014D_PID	0x014D
+#define MTXORB_FTDI_RANGE_014E_PID	0x014E
+#define MTXORB_FTDI_RANGE_014F_PID	0x014F
+#define MTXORB_FTDI_RANGE_0150_PID	0x0150
+#define MTXORB_FTDI_RANGE_0151_PID	0x0151
+#define MTXORB_FTDI_RANGE_0152_PID	0x0152
+#define MTXORB_FTDI_RANGE_0153_PID	0x0153
+#define MTXORB_FTDI_RANGE_0154_PID	0x0154
+#define MTXORB_FTDI_RANGE_0155_PID	0x0155
+#define MTXORB_FTDI_RANGE_0156_PID	0x0156
+#define MTXORB_FTDI_RANGE_0157_PID	0x0157
+#define MTXORB_FTDI_RANGE_0158_PID	0x0158
+#define MTXORB_FTDI_RANGE_0159_PID	0x0159
+#define MTXORB_FTDI_RANGE_015A_PID	0x015A
+#define MTXORB_FTDI_RANGE_015B_PID	0x015B
+#define MTXORB_FTDI_RANGE_015C_PID	0x015C
+#define MTXORB_FTDI_RANGE_015D_PID	0x015D
+#define MTXORB_FTDI_RANGE_015E_PID	0x015E
+#define MTXORB_FTDI_RANGE_015F_PID	0x015F
+#define MTXORB_FTDI_RANGE_0160_PID	0x0160
+#define MTXORB_FTDI_RANGE_0161_PID	0x0161
+#define MTXORB_FTDI_RANGE_0162_PID	0x0162
+#define MTXORB_FTDI_RANGE_0163_PID	0x0163
+#define MTXORB_FTDI_RANGE_0164_PID	0x0164
+#define MTXORB_FTDI_RANGE_0165_PID	0x0165
+#define MTXORB_FTDI_RANGE_0166_PID	0x0166
+#define MTXORB_FTDI_RANGE_0167_PID	0x0167
+#define MTXORB_FTDI_RANGE_0168_PID	0x0168
+#define MTXORB_FTDI_RANGE_0169_PID	0x0169
+#define MTXORB_FTDI_RANGE_016A_PID	0x016A
+#define MTXORB_FTDI_RANGE_016B_PID	0x016B
+#define MTXORB_FTDI_RANGE_016C_PID	0x016C
+#define MTXORB_FTDI_RANGE_016D_PID	0x016D
+#define MTXORB_FTDI_RANGE_016E_PID	0x016E
+#define MTXORB_FTDI_RANGE_016F_PID	0x016F
+#define MTXORB_FTDI_RANGE_0170_PID	0x0170
+#define MTXORB_FTDI_RANGE_0171_PID	0x0171
+#define MTXORB_FTDI_RANGE_0172_PID	0x0172
+#define MTXORB_FTDI_RANGE_0173_PID	0x0173
+#define MTXORB_FTDI_RANGE_0174_PID	0x0174
+#define MTXORB_FTDI_RANGE_0175_PID	0x0175
+#define MTXORB_FTDI_RANGE_0176_PID	0x0176
+#define MTXORB_FTDI_RANGE_0177_PID	0x0177
+#define MTXORB_FTDI_RANGE_0178_PID	0x0178
+#define MTXORB_FTDI_RANGE_0179_PID	0x0179
+#define MTXORB_FTDI_RANGE_017A_PID	0x017A
+#define MTXORB_FTDI_RANGE_017B_PID	0x017B
+#define MTXORB_FTDI_RANGE_017C_PID	0x017C
+#define MTXORB_FTDI_RANGE_017D_PID	0x017D
+#define MTXORB_FTDI_RANGE_017E_PID	0x017E
+#define MTXORB_FTDI_RANGE_017F_PID	0x017F
+#define MTXORB_FTDI_RANGE_0180_PID	0x0180
+#define MTXORB_FTDI_RANGE_0181_PID	0x0181
+#define MTXORB_FTDI_RANGE_0182_PID	0x0182
+#define MTXORB_FTDI_RANGE_0183_PID	0x0183
+#define MTXORB_FTDI_RANGE_0184_PID	0x0184
+#define MTXORB_FTDI_RANGE_0185_PID	0x0185
+#define MTXORB_FTDI_RANGE_0186_PID	0x0186
+#define MTXORB_FTDI_RANGE_0187_PID	0x0187
+#define MTXORB_FTDI_RANGE_0188_PID	0x0188
+#define MTXORB_FTDI_RANGE_0189_PID	0x0189
+#define MTXORB_FTDI_RANGE_018A_PID	0x018A
+#define MTXORB_FTDI_RANGE_018B_PID	0x018B
+#define MTXORB_FTDI_RANGE_018C_PID	0x018C
+#define MTXORB_FTDI_RANGE_018D_PID	0x018D
+#define MTXORB_FTDI_RANGE_018E_PID	0x018E
+#define MTXORB_FTDI_RANGE_018F_PID	0x018F
+#define MTXORB_FTDI_RANGE_0190_PID	0x0190
+#define MTXORB_FTDI_RANGE_0191_PID	0x0191
+#define MTXORB_FTDI_RANGE_0192_PID	0x0192
+#define MTXORB_FTDI_RANGE_0193_PID	0x0193
+#define MTXORB_FTDI_RANGE_0194_PID	0x0194
+#define MTXORB_FTDI_RANGE_0195_PID	0x0195
+#define MTXORB_FTDI_RANGE_0196_PID	0x0196
+#define MTXORB_FTDI_RANGE_0197_PID	0x0197
+#define MTXORB_FTDI_RANGE_0198_PID	0x0198
+#define MTXORB_FTDI_RANGE_0199_PID	0x0199
+#define MTXORB_FTDI_RANGE_019A_PID	0x019A
+#define MTXORB_FTDI_RANGE_019B_PID	0x019B
+#define MTXORB_FTDI_RANGE_019C_PID	0x019C
+#define MTXORB_FTDI_RANGE_019D_PID	0x019D
+#define MTXORB_FTDI_RANGE_019E_PID	0x019E
+#define MTXORB_FTDI_RANGE_019F_PID	0x019F
+#define MTXORB_FTDI_RANGE_01A0_PID	0x01A0
+#define MTXORB_FTDI_RANGE_01A1_PID	0x01A1
+#define MTXORB_FTDI_RANGE_01A2_PID	0x01A2
+#define MTXORB_FTDI_RANGE_01A3_PID	0x01A3
+#define MTXORB_FTDI_RANGE_01A4_PID	0x01A4
+#define MTXORB_FTDI_RANGE_01A5_PID	0x01A5
+#define MTXORB_FTDI_RANGE_01A6_PID	0x01A6
+#define MTXORB_FTDI_RANGE_01A7_PID	0x01A7
+#define MTXORB_FTDI_RANGE_01A8_PID	0x01A8
+#define MTXORB_FTDI_RANGE_01A9_PID	0x01A9
+#define MTXORB_FTDI_RANGE_01AA_PID	0x01AA
+#define MTXORB_FTDI_RANGE_01AB_PID	0x01AB
+#define MTXORB_FTDI_RANGE_01AC_PID	0x01AC
+#define MTXORB_FTDI_RANGE_01AD_PID	0x01AD
+#define MTXORB_FTDI_RANGE_01AE_PID	0x01AE
+#define MTXORB_FTDI_RANGE_01AF_PID	0x01AF
+#define MTXORB_FTDI_RANGE_01B0_PID	0x01B0
+#define MTXORB_FTDI_RANGE_01B1_PID	0x01B1
+#define MTXORB_FTDI_RANGE_01B2_PID	0x01B2
+#define MTXORB_FTDI_RANGE_01B3_PID	0x01B3
+#define MTXORB_FTDI_RANGE_01B4_PID	0x01B4
+#define MTXORB_FTDI_RANGE_01B5_PID	0x01B5
+#define MTXORB_FTDI_RANGE_01B6_PID	0x01B6
+#define MTXORB_FTDI_RANGE_01B7_PID	0x01B7
+#define MTXORB_FTDI_RANGE_01B8_PID	0x01B8
+#define MTXORB_FTDI_RANGE_01B9_PID	0x01B9
+#define MTXORB_FTDI_RANGE_01BA_PID	0x01BA
+#define MTXORB_FTDI_RANGE_01BB_PID	0x01BB
+#define MTXORB_FTDI_RANGE_01BC_PID	0x01BC
+#define MTXORB_FTDI_RANGE_01BD_PID	0x01BD
+#define MTXORB_FTDI_RANGE_01BE_PID	0x01BE
+#define MTXORB_FTDI_RANGE_01BF_PID	0x01BF
+#define MTXORB_FTDI_RANGE_01C0_PID	0x01C0
+#define MTXORB_FTDI_RANGE_01C1_PID	0x01C1
+#define MTXORB_FTDI_RANGE_01C2_PID	0x01C2
+#define MTXORB_FTDI_RANGE_01C3_PID	0x01C3
+#define MTXORB_FTDI_RANGE_01C4_PID	0x01C4
+#define MTXORB_FTDI_RANGE_01C5_PID	0x01C5
+#define MTXORB_FTDI_RANGE_01C6_PID	0x01C6
+#define MTXORB_FTDI_RANGE_01C7_PID	0x01C7
+#define MTXORB_FTDI_RANGE_01C8_PID	0x01C8
+#define MTXORB_FTDI_RANGE_01C9_PID	0x01C9
+#define MTXORB_FTDI_RANGE_01CA_PID	0x01CA
+#define MTXORB_FTDI_RANGE_01CB_PID	0x01CB
+#define MTXORB_FTDI_RANGE_01CC_PID	0x01CC
+#define MTXORB_FTDI_RANGE_01CD_PID	0x01CD
+#define MTXORB_FTDI_RANGE_01CE_PID	0x01CE
+#define MTXORB_FTDI_RANGE_01CF_PID	0x01CF
+#define MTXORB_FTDI_RANGE_01D0_PID	0x01D0
+#define MTXORB_FTDI_RANGE_01D1_PID	0x01D1
+#define MTXORB_FTDI_RANGE_01D2_PID	0x01D2
+#define MTXORB_FTDI_RANGE_01D3_PID	0x01D3
+#define MTXORB_FTDI_RANGE_01D4_PID	0x01D4
+#define MTXORB_FTDI_RANGE_01D5_PID	0x01D5
+#define MTXORB_FTDI_RANGE_01D6_PID	0x01D6
+#define MTXORB_FTDI_RANGE_01D7_PID	0x01D7
+#define MTXORB_FTDI_RANGE_01D8_PID	0x01D8
+#define MTXORB_FTDI_RANGE_01D9_PID	0x01D9
+#define MTXORB_FTDI_RANGE_01DA_PID	0x01DA
+#define MTXORB_FTDI_RANGE_01DB_PID	0x01DB
+#define MTXORB_FTDI_RANGE_01DC_PID	0x01DC
+#define MTXORB_FTDI_RANGE_01DD_PID	0x01DD
+#define MTXORB_FTDI_RANGE_01DE_PID	0x01DE
+#define MTXORB_FTDI_RANGE_01DF_PID	0x01DF
+#define MTXORB_FTDI_RANGE_01E0_PID	0x01E0
+#define MTXORB_FTDI_RANGE_01E1_PID	0x01E1
+#define MTXORB_FTDI_RANGE_01E2_PID	0x01E2
+#define MTXORB_FTDI_RANGE_01E3_PID	0x01E3
+#define MTXORB_FTDI_RANGE_01E4_PID	0x01E4
+#define MTXORB_FTDI_RANGE_01E5_PID	0x01E5
+#define MTXORB_FTDI_RANGE_01E6_PID	0x01E6
+#define MTXORB_FTDI_RANGE_01E7_PID	0x01E7
+#define MTXORB_FTDI_RANGE_01E8_PID	0x01E8
+#define MTXORB_FTDI_RANGE_01E9_PID	0x01E9
+#define MTXORB_FTDI_RANGE_01EA_PID	0x01EA
+#define MTXORB_FTDI_RANGE_01EB_PID	0x01EB
+#define MTXORB_FTDI_RANGE_01EC_PID	0x01EC
+#define MTXORB_FTDI_RANGE_01ED_PID	0x01ED
+#define MTXORB_FTDI_RANGE_01EE_PID	0x01EE
+#define MTXORB_FTDI_RANGE_01EF_PID	0x01EF
+#define MTXORB_FTDI_RANGE_01F0_PID	0x01F0
+#define MTXORB_FTDI_RANGE_01F1_PID	0x01F1
+#define MTXORB_FTDI_RANGE_01F2_PID	0x01F2
+#define MTXORB_FTDI_RANGE_01F3_PID	0x01F3
+#define MTXORB_FTDI_RANGE_01F4_PID	0x01F4
+#define MTXORB_FTDI_RANGE_01F5_PID	0x01F5
+#define MTXORB_FTDI_RANGE_01F6_PID	0x01F6
+#define MTXORB_FTDI_RANGE_01F7_PID	0x01F7
+#define MTXORB_FTDI_RANGE_01F8_PID	0x01F8
+#define MTXORB_FTDI_RANGE_01F9_PID	0x01F9
+#define MTXORB_FTDI_RANGE_01FA_PID	0x01FA
+#define MTXORB_FTDI_RANGE_01FB_PID	0x01FB
+#define MTXORB_FTDI_RANGE_01FC_PID	0x01FC
+#define MTXORB_FTDI_RANGE_01FD_PID	0x01FD
+#define MTXORB_FTDI_RANGE_01FE_PID	0x01FE
+#define MTXORB_FTDI_RANGE_01FF_PID	0x01FF
+
+
+
+/*
+ * The Mobility Lab (TML)
+ * Submitted by Pierre Castella
+ */
+#define TML_VID			0x1B91	/* Vendor ID */
+#define TML_USB_SERIAL_PID	0x0064	/* USB - Serial Converter */
+
+/* Alti-2 products  http://www.alti-2.com */
+#define ALTI2_VID	0x1BC9
+#define ALTI2_N3_PID	0x6001	/* Neptune 3 */
+
+/*
+ * Ionics PlugComputer
+ */
+#define IONICS_VID			0x1c0c
+#define IONICS_PLUGCOMPUTER_PID		0x0102
+
+/*
+ * Dresden Elektronik Sensor Terminal Board
+ */
+#define DE_VID			0x1cf1 /* Vendor ID */
+#define STB_PID			0x0001 /* Sensor Terminal Board */
+#define WHT_PID			0x0004 /* Wireless Handheld Terminal */
+
+/*
+ * STMicroelectonics
+ */
+#define ST_VID			0x0483
+#define ST_STMCLT1030_PID	0x3747 /* ST Micro Connect Lite STMCLT1030 */
+
+/*
+ * Papouch products (http://www.papouch.com/)
+ * Submitted by Folkert van Heusden
+ */
+
+#define PAPOUCH_VID			0x5050	/* Vendor ID */
+#define PAPOUCH_SB485_PID		0x0100	/* Papouch SB485 USB-485/422 Converter */
+#define PAPOUCH_AP485_PID		0x0101	/* AP485 USB-RS485 Converter */
+#define PAPOUCH_SB422_PID		0x0102	/* Papouch SB422 USB-RS422 Converter  */
+#define PAPOUCH_SB485_2_PID		0x0103	/* Papouch SB485 USB-485/422 Converter */
+#define PAPOUCH_AP485_2_PID		0x0104	/* AP485 USB-RS485 Converter */
+#define PAPOUCH_SB422_2_PID		0x0105	/* Papouch SB422 USB-RS422 Converter  */
+#define PAPOUCH_SB485S_PID		0x0106	/* Papouch SB485S USB-485/422 Converter */
+#define PAPOUCH_SB485C_PID		0x0107	/* Papouch SB485C USB-485/422 Converter */
+#define PAPOUCH_LEC_PID			0x0300	/* LEC USB Converter */
+#define PAPOUCH_SB232_PID		0x0301	/* Papouch SB232 USB-RS232 Converter */
+#define PAPOUCH_TMU_PID			0x0400	/* TMU USB Thermometer */
+#define PAPOUCH_IRAMP_PID		0x0500	/* Papouch IRAmp Duplex */
+#define PAPOUCH_DRAK5_PID		0x0700	/* Papouch DRAK5 */
+#define PAPOUCH_QUIDO8x8_PID		0x0800	/* Papouch Quido 8/8 Module */
+#define PAPOUCH_QUIDO4x4_PID		0x0900	/* Papouch Quido 4/4 Module */
+#define PAPOUCH_QUIDO2x2_PID		0x0a00	/* Papouch Quido 2/2 Module */
+#define PAPOUCH_QUIDO10x1_PID		0x0b00	/* Papouch Quido 10/1 Module */
+#define PAPOUCH_QUIDO30x3_PID		0x0c00	/* Papouch Quido 30/3 Module */
+#define PAPOUCH_QUIDO60x3_PID		0x0d00	/* Papouch Quido 60(100)/3 Module */
+#define PAPOUCH_QUIDO2x16_PID		0x0e00	/* Papouch Quido 2/16 Module */
+#define PAPOUCH_QUIDO3x32_PID		0x0f00	/* Papouch Quido 3/32 Module */
+#define PAPOUCH_DRAK6_PID		0x1000	/* Papouch DRAK6 */
+#define PAPOUCH_UPSUSB_PID		0x8000	/* Papouch UPS-USB adapter */
+#define PAPOUCH_MU_PID			0x8001	/* MU controller */
+#define PAPOUCH_SIMUKEY_PID		0x8002	/* Papouch SimuKey */
+#define PAPOUCH_AD4USB_PID		0x8003	/* AD4USB Measurement Module */
+#define PAPOUCH_GMUX_PID		0x8004	/* Papouch GOLIATH MUX */
+#define PAPOUCH_GMSR_PID		0x8005	/* Papouch GOLIATH MSR */
+
+/*
+ * Marvell SheevaPlug
+ */
+#define MARVELL_VID		0x9e88
+#define MARVELL_SHEEVAPLUG_PID	0x9e8f
+
+/*
+ * Evolution Robotics products (http://www.evolution.com/).
+ * Submitted by Shawn M. Lavelle.
+ */
+#define EVOLUTION_VID		0xDEEE	/* Vendor ID */
+#define EVOLUTION_ER1_PID	0x0300	/* ER1 Control Module */
+#define EVO_8U232AM_PID		0x02FF	/* Evolution robotics RCM2 (FT232AM)*/
+#define EVO_HYBRID_PID		0x0302	/* Evolution robotics RCM4 PID (FT232BM)*/
+#define EVO_RCM4_PID		0x0303	/* Evolution robotics RCM4 PID */
+
+/*
+ * MJS Gadgets HD Radio / XM Radio / Sirius Radio interfaces (using VID 0x0403)
+ */
+#define MJSG_GENERIC_PID	0x9378
+#define MJSG_SR_RADIO_PID	0x9379
+#define MJSG_XM_RADIO_PID	0x937A
+#define MJSG_HD_RADIO_PID	0x937C
+
+/*
+ * D.O.Tec products (http://www.directout.eu)
+ */
+#define FTDI_DOTEC_PID 0x9868
+
+/*
+ * Xverve Signalyzer tools (http://www.signalyzer.com/)
+ */
+#define XVERVE_SIGNALYZER_ST_PID	0xBCA0
+#define XVERVE_SIGNALYZER_SLITE_PID	0xBCA1
+#define XVERVE_SIGNALYZER_SH2_PID	0xBCA2
+#define XVERVE_SIGNALYZER_SH4_PID	0xBCA4
+
+/*
+ * Segway Robotic Mobility Platform USB interface (using VID 0x0403)
+ * Submitted by John G. Rogers
+ */
+#define SEGWAY_RMP200_PID	0xe729
+
+
+/*
+ * Accesio USB Data Acquisition products (http://www.accesio.com/)
+ */
+#define ACCESIO_COM4SM_PID 	0xD578
+
+/* www.sciencescope.co.uk educational dataloggers */
+#define FTDI_SCIENCESCOPE_LOGBOOKML_PID		0xFF18
+#define FTDI_SCIENCESCOPE_LS_LOGBOOK_PID	0xFF1C
+#define FTDI_SCIENCESCOPE_HS_LOGBOOK_PID	0xFF1D
+
+/*
+ * Milkymist One JTAG/Serial
+ */
+#define QIHARDWARE_VID			0x20B7
+#define MILKYMISTONE_JTAGSERIAL_PID	0x0713
+
+/*
+ * CTI GmbH RS485 Converter http://www.cti-lean.com/
+ */
+/* USB-485-Mini*/
+#define FTDI_CTI_MINI_PID	0xF608
+/* USB-Nano-485*/
+#define FTDI_CTI_NANO_PID	0xF60B
+
+/*
+ * ZeitControl cardsystems GmbH rfid-readers http://zeitconrol.de
+ */
+/* TagTracer MIFARE*/
+#define FTDI_ZEITCONTROL_TAGTRACE_MIFARE_PID	0xF7C0
+
+/*
+ * Rainforest Automation
+ */
+/* ZigBee controller */
+#define FTDI_RF_R106		0x8A28
+
+/*
+ * Product: HCP HIT GPRS modem
+ * Manufacturer: HCP d.o.o.
+ * ATI command output: Cinterion MC55i
+ */
+#define FTDI_CINTERION_MC55I_PID	0xA951