chardev: move headers to include/chardev

So they are all in one place. The following patch will move serial &
parallel declarations to the respective headers.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

1 files changed, 0 insertions, 499 deletions

diff --git a/include/sysemu/char.h b/include/sysemu/char.h
deleted file mode 100644
index fffc0f40d4..0000000000
--- a/include/sysemu/char.h
+++ /dev/null
@@ -1,499 +0,0 @@
-#ifndef QEMU_CHAR_H
-#define QEMU_CHAR_H
-
-#include "qemu-common.h"
-#include "qemu/option.h"
-#include "qemu/main-loop.h"
-#include "qemu/bitmap.h"
-#include "qom/object.h"
-
-#define IAC_EOR 239
-#define IAC_SE 240
-#define IAC_NOP 241
-#define IAC_BREAK 243
-#define IAC_IP 244
-#define IAC_SB 250
-#define IAC 255
-
-/* character device */
-
-typedef enum {
-    CHR_EVENT_BREAK, /* serial break char */
-    CHR_EVENT_OPENED, /* new connection established */
-    CHR_EVENT_MUX_IN, /* mux-focus was set to this terminal */
-    CHR_EVENT_MUX_OUT, /* mux-focus will move on */
-    CHR_EVENT_CLOSED /* connection closed */
-} QEMUChrEvent;
-
-#define CHR_READ_BUF_LEN 4096
-
-#define CHR_IOCTL_SERIAL_SET_PARAMS   1
-typedef struct {
-    int speed;
-    int parity;
-    int data_bits;
-    int stop_bits;
-} QEMUSerialSetParams;
-
-#define CHR_IOCTL_SERIAL_SET_BREAK    2
-
-#define CHR_IOCTL_PP_READ_DATA        3
-#define CHR_IOCTL_PP_WRITE_DATA       4
-#define CHR_IOCTL_PP_READ_CONTROL     5
-#define CHR_IOCTL_PP_WRITE_CONTROL    6
-#define CHR_IOCTL_PP_READ_STATUS      7
-#define CHR_IOCTL_PP_EPP_READ_ADDR    8
-#define CHR_IOCTL_PP_EPP_READ         9
-#define CHR_IOCTL_PP_EPP_WRITE_ADDR  10
-#define CHR_IOCTL_PP_EPP_WRITE       11
-#define CHR_IOCTL_PP_DATA_DIR        12
-
-struct ParallelIOArg {
-    void *buffer;
-    int count;
-};
-
-#define CHR_IOCTL_SERIAL_SET_TIOCM   13
-#define CHR_IOCTL_SERIAL_GET_TIOCM   14
-
-#define CHR_TIOCM_CTS	0x020
-#define CHR_TIOCM_CAR	0x040
-#define CHR_TIOCM_DSR	0x100
-#define CHR_TIOCM_RI	0x080
-#define CHR_TIOCM_DTR	0x002
-#define CHR_TIOCM_RTS	0x004
-
-typedef void IOEventHandler(void *opaque, int event);
-
-typedef enum {
-    /* Whether the chardev peer is able to close and
-     * reopen the data channel, thus requiring support
-     * for qemu_chr_wait_connected() to wait for a
-     * valid connection */
-    QEMU_CHAR_FEATURE_RECONNECTABLE,
-    /* Whether it is possible to send/recv file descriptors
-     * over the data channel */
-    QEMU_CHAR_FEATURE_FD_PASS,
-    /* Whether replay or record mode is enabled */
-    QEMU_CHAR_FEATURE_REPLAY,
-
-    QEMU_CHAR_FEATURE_LAST,
-} ChardevFeature;
-
-/* This is the backend as seen by frontend, the actual backend is
- * Chardev */
-typedef struct CharBackend {
-    Chardev *chr;
-    IOEventHandler *chr_event;
-    IOCanReadHandler *chr_can_read;
-    IOReadHandler *chr_read;
-    void *opaque;
-    int tag;
-    int fe_open;
-} CharBackend;
-
-struct Chardev {
-    Object parent_obj;
-
-    QemuMutex chr_write_lock;
-    CharBackend *be;
-    char *label;
-    char *filename;
-    int logfd;
-    int be_open;
-    GSource *gsource;
-    DECLARE_BITMAP(features, QEMU_CHAR_FEATURE_LAST);
-};
-
-/**
- * @qemu_chr_new_from_opts:
- *
- * Create a new character backend from a QemuOpts list.
- *
- * @opts see qemu-config.c for a list of valid options
- *
- * Returns: a new character backend
- */
-Chardev *qemu_chr_new_from_opts(QemuOpts *opts,
-                                Error **errp);
-
-/**
- * @qemu_chr_parse_common:
- *
- * Parse the common options available to all character backends.
- *
- * @opts the options that still need parsing
- * @backend a new backend
- */
-void qemu_chr_parse_common(QemuOpts *opts, ChardevCommon *backend);
-
-/**
- * @qemu_chr_new:
- *
- * Create a new character backend from a URI.
- *
- * @label the name of the backend
- * @filename the URI
- *
- * Returns: a new character backend
- */
-Chardev *qemu_chr_new(const char *label, const char *filename);
-
-
-/**
- * @qemu_chr_fe_disconnect:
- *
- * Close a fd accpeted by character backend.
- * Without associated Chardev, do nothing.
- */
-void qemu_chr_fe_disconnect(CharBackend *be);
-
-/**
- * @qemu_chr_cleanup:
- *
- * Delete all chardevs (when leaving qemu)
- */
-void qemu_chr_cleanup(void);
-
-/**
- * @qemu_chr_fe_wait_connected:
- *
- * Wait for characted backend to be connected, return < 0 on error or
- * if no assicated Chardev.
- */
-int qemu_chr_fe_wait_connected(CharBackend *be, Error **errp);
-
-/**
- * @qemu_chr_new_noreplay:
- *
- * Create a new character backend from a URI.
- * Character device communications are not written
- * into the replay log.
- *
- * @label the name of the backend
- * @filename the URI
- *
- * Returns: a new character backend
- */
-Chardev *qemu_chr_new_noreplay(const char *label, const char *filename);
-
-/**
- * @qemu_chr_fe_set_echo:
- *
- * Ask the backend to override its normal echo setting.  This only really
- * applies to the stdio backend and is used by the QMP server such that you
- * can see what you type if you try to type QMP commands.
- * Without associated Chardev, do nothing.
- *
- * @echo true to enable echo, false to disable echo
- */
-void qemu_chr_fe_set_echo(CharBackend *be, bool echo);
-
-/**
- * @qemu_chr_fe_set_open:
- *
- * Set character frontend open status.  This is an indication that the
- * front end is ready (or not) to begin doing I/O.
- * Without associated Chardev, do nothing.
- */
-void qemu_chr_fe_set_open(CharBackend *be, int fe_open);
-
-/**
- * @qemu_chr_fe_printf:
- *
- * Write to a character backend using a printf style interface.  This
- * function is thread-safe. It does nothing without associated
- * Chardev.
- *
- * @fmt see #printf
- */
-void qemu_chr_fe_printf(CharBackend *be, const char *fmt, ...)
-    GCC_FMT_ATTR(2, 3);
-
-/**
- * @qemu_chr_fe_add_watch:
- *
- * If the backend is connected, create and add a #GSource that fires
- * when the given condition (typically G_IO_OUT|G_IO_HUP or G_IO_HUP)
- * is active; return the #GSource's tag.  If it is disconnected,
- * or without associated Chardev, return 0.
- *
- * @cond the condition to poll for
- * @func the function to call when the condition happens
- * @user_data the opaque pointer to pass to @func
- *
- * Returns: the source tag
- */
-guint qemu_chr_fe_add_watch(CharBackend *be, GIOCondition cond,
-                            GIOFunc func, void *user_data);
-
-/**
- * @qemu_chr_fe_write:
- *
- * Write data to a character backend from the front end.  This function
- * will send data from the front end to the back end.  This function
- * is thread-safe.
- *
- * @buf the data
- * @len the number of bytes to send
- *
- * Returns: the number of bytes consumed (0 if no assicated Chardev)
- */
-int qemu_chr_fe_write(CharBackend *be, const uint8_t *buf, int len);
-
-/**
- * @qemu_chr_fe_write_all:
- *
- * Write data to a character backend from the front end.  This function will
- * send data from the front end to the back end.  Unlike @qemu_chr_fe_write,
- * this function will block if the back end cannot consume all of the data
- * attempted to be written.  This function is thread-safe.
- *
- * @buf the data
- * @len the number of bytes to send
- *
- * Returns: the number of bytes consumed (0 if no assicated Chardev)
- */
-int qemu_chr_fe_write_all(CharBackend *be, const uint8_t *buf, int len);
-
-/**
- * @qemu_chr_fe_read_all:
- *
- * Read data to a buffer from the back end.
- *
- * @buf the data buffer
- * @len the number of bytes to read
- *
- * Returns: the number of bytes read (0 if no assicated Chardev)
- */
-int qemu_chr_fe_read_all(CharBackend *be, uint8_t *buf, int len);
-
-/**
- * @qemu_chr_fe_ioctl:
- *
- * Issue a device specific ioctl to a backend.  This function is thread-safe.
- *
- * @cmd see CHR_IOCTL_*
- * @arg the data associated with @cmd
- *
- * Returns: if @cmd is not supported by the backend or there is no
- *          associated Chardev, -ENOTSUP, otherwise the return
- *          value depends on the semantics of @cmd
- */
-int qemu_chr_fe_ioctl(CharBackend *be, int cmd, void *arg);
-
-/**
- * @qemu_chr_fe_get_msgfd:
- *
- * For backends capable of fd passing, return the latest file descriptor passed
- * by a client.
- *
- * Returns: -1 if fd passing isn't supported or there is no pending file
- *          descriptor.  If a file descriptor is returned, subsequent calls to
- *          this function will return -1 until a client sends a new file
- *          descriptor.
- */
-int qemu_chr_fe_get_msgfd(CharBackend *be);
-
-/**
- * @qemu_chr_fe_get_msgfds:
- *
- * For backends capable of fd passing, return the number of file received
- * descriptors and fills the fds array up to num elements
- *
- * Returns: -1 if fd passing isn't supported or there are no pending file
- *          descriptors.  If file descriptors are returned, subsequent calls to
- *          this function will return -1 until a client sends a new set of file
- *          descriptors.
- */
-int qemu_chr_fe_get_msgfds(CharBackend *be, int *fds, int num);
-
-/**
- * @qemu_chr_fe_set_msgfds:
- *
- * For backends capable of fd passing, set an array of fds to be passed with
- * the next send operation.
- * A subsequent call to this function before calling a write function will
- * result in overwriting the fd array with the new value without being send.
- * Upon writing the message the fd array is freed.
- *
- * Returns: -1 if fd passing isn't supported or no associated Chardev.
- */
-int qemu_chr_fe_set_msgfds(CharBackend *be, int *fds, int num);
-
-/**
- * @qemu_chr_be_can_write:
- *
- * Determine how much data the front end can currently accept.  This function
- * returns the number of bytes the front end can accept.  If it returns 0, the
- * front end cannot receive data at the moment.  The function must be polled
- * to determine when data can be received.
- *
- * Returns: the number of bytes the front end can receive via @qemu_chr_be_write
- */
-int qemu_chr_be_can_write(Chardev *s);
-
-/**
- * @qemu_chr_be_write:
- *
- * Write data from the back end to the front end.  Before issuing this call,
- * the caller should call @qemu_chr_be_can_write to determine how much data
- * the front end can currently accept.
- *
- * @buf a buffer to receive data from the front end
- * @len the number of bytes to receive from the front end
- */
-void qemu_chr_be_write(Chardev *s, uint8_t *buf, int len);
-
-/**
- * @qemu_chr_be_write_impl:
- *
- * Implementation of back end writing. Used by replay module.
- *
- * @buf a buffer to receive data from the front end
- * @len the number of bytes to receive from the front end
- */
-void qemu_chr_be_write_impl(Chardev *s, uint8_t *buf, int len);
-
-/**
- * @qemu_chr_be_event:
- *
- * Send an event from the back end to the front end.
- *
- * @event the event to send
- */
-void qemu_chr_be_event(Chardev *s, int event);
-
-/**
- * @qemu_chr_fe_init:
- *
- * Initializes a front end for the given CharBackend and
- * Chardev. Call qemu_chr_fe_deinit() to remove the association and
- * release the driver.
- *
- * Returns: false on error.
- */
-bool qemu_chr_fe_init(CharBackend *b, Chardev *s, Error **errp);
-
-/**
- * @qemu_chr_fe_get_driver:
- *
- * Returns the driver associated with a CharBackend or NULL if no
- * associated Chardev.
- */
-Chardev *qemu_chr_fe_get_driver(CharBackend *be);
-
-/**
- * @qemu_chr_fe_deinit:
- *
- * Dissociate the CharBackend from the Chardev.
- *
- * Safe to call without associated Chardev.
- */
-void qemu_chr_fe_deinit(CharBackend *b);
-
-/**
- * @qemu_chr_fe_set_handlers:
- * @b: a CharBackend
- * @fd_can_read: callback to get the amount of data the frontend may
- *               receive
- * @fd_read: callback to receive data from char
- * @fd_event: event callback
- * @opaque: an opaque pointer for the callbacks
- * @context: a main loop context or NULL for the default
- * @set_open: whether to call qemu_chr_fe_set_open() implicitely when
- * any of the handler is non-NULL
- *
- * Set the front end char handlers. The front end takes the focus if
- * any of the handler is non-NULL.
- *
- * Without associated Chardev, nothing is changed.
- */
-void qemu_chr_fe_set_handlers(CharBackend *b,
-                              IOCanReadHandler *fd_can_read,
-                              IOReadHandler *fd_read,
-                              IOEventHandler *fd_event,
-                              void *opaque,
-                              GMainContext *context,
-                              bool set_open);
-
-/**
- * @qemu_chr_fe_take_focus:
- *
- * Take the focus (if the front end is muxed).
- *
- * Without associated Chardev, nothing is changed.
- */
-void qemu_chr_fe_take_focus(CharBackend *b);
-
-void qemu_chr_fe_accept_input(CharBackend *be);
-int qemu_chr_add_client(Chardev *s, int fd);
-Chardev *qemu_chr_find(const char *name);
-
-bool qemu_chr_has_feature(Chardev *chr,
-                          ChardevFeature feature);
-void qemu_chr_set_feature(Chardev *chr,
-                          ChardevFeature feature);
-QemuOpts *qemu_chr_parse_compat(const char *label, const char *filename);
-int qemu_chr_write_all(Chardev *s, const uint8_t *buf, int len);
-int qemu_chr_wait_connected(Chardev *chr, Error **errp);
-
-#define TYPE_CHARDEV "chardev"
-#define CHARDEV(obj) OBJECT_CHECK(Chardev, (obj), TYPE_CHARDEV)
-#define CHARDEV_CLASS(klass) \
-    OBJECT_CLASS_CHECK(ChardevClass, (klass), TYPE_CHARDEV)
-#define CHARDEV_GET_CLASS(obj) \
-    OBJECT_GET_CLASS(ChardevClass, (obj), TYPE_CHARDEV)
-
-#define TYPE_CHARDEV_NULL "chardev-null"
-#define TYPE_CHARDEV_MUX "chardev-mux"
-#define TYPE_CHARDEV_RINGBUF "chardev-ringbuf"
-#define TYPE_CHARDEV_PTY "chardev-pty"
-#define TYPE_CHARDEV_CONSOLE "chardev-console"
-#define TYPE_CHARDEV_STDIO "chardev-stdio"
-#define TYPE_CHARDEV_PIPE "chardev-pipe"
-#define TYPE_CHARDEV_MEMORY "chardev-memory"
-#define TYPE_CHARDEV_PARALLEL "chardev-parallel"
-#define TYPE_CHARDEV_FILE "chardev-file"
-#define TYPE_CHARDEV_SERIAL "chardev-serial"
-#define TYPE_CHARDEV_SOCKET "chardev-socket"
-#define TYPE_CHARDEV_UDP "chardev-udp"
-
-#define CHARDEV_IS_RINGBUF(chr) \
-    object_dynamic_cast(OBJECT(chr), TYPE_CHARDEV_RINGBUF)
-#define CHARDEV_IS_PTY(chr) \
-    object_dynamic_cast(OBJECT(chr), TYPE_CHARDEV_PTY)
-
-typedef struct ChardevClass {
-    ObjectClass parent_class;
-
-    bool internal; /* TODO: eventually use TYPE_USER_CREATABLE */
-    void (*parse)(QemuOpts *opts, ChardevBackend *backend, Error **errp);
-
-    void (*open)(Chardev *chr, ChardevBackend *backend,
-                 bool *be_opened, Error **errp);
-
-    int (*chr_write)(Chardev *s, const uint8_t *buf, int len);
-    int (*chr_sync_read)(Chardev *s, const uint8_t *buf, int len);
-    GSource *(*chr_add_watch)(Chardev *s, GIOCondition cond);
-    void (*chr_update_read_handler)(Chardev *s, GMainContext *context);
-    int (*chr_ioctl)(Chardev *s, int cmd, void *arg);
-    int (*get_msgfds)(Chardev *s, int* fds, int num);
-    int (*set_msgfds)(Chardev *s, int *fds, int num);
-    int (*chr_add_client)(Chardev *chr, int fd);
-    int (*chr_wait_connected)(Chardev *chr, Error **errp);
-    void (*chr_disconnect)(Chardev *chr);
-    void (*chr_accept_input)(Chardev *chr);
-    void (*chr_set_echo)(Chardev *chr, bool echo);
-    void (*chr_set_fe_open)(Chardev *chr, int fe_open);
-} ChardevClass;
-
-Chardev *qemu_chardev_new(const char *id, const char *typename,
-                          ChardevBackend *backend, Error **errp);
-
-extern int term_escape_char;
-
-/* console.c */
-void qemu_chr_parse_vc(QemuOpts *opts, ChardevBackend *backend, Error **errp);
-
-#endif