diff options
Diffstat (limited to 'hw/misc/aspeed_scu.c')
| -rw-r--r-- | hw/misc/aspeed_scu.c | 283 |
1 files changed, 283 insertions, 0 deletions
diff --git a/hw/misc/aspeed_scu.c b/hw/misc/aspeed_scu.c new file mode 100644 index 0000000000..4f9df581e7 --- /dev/null +++ b/hw/misc/aspeed_scu.c @@ -0,0 +1,283 @@ +/* + * ASPEED System Control Unit + * + * Andrew Jeffery <andrew@aj.id.au> + * + * Copyright 2016 IBM Corp. + * + * This code is licensed under the GPL version 2 or later. See + * the COPYING file in the top-level directory. + */ + +#include "qemu/osdep.h" +#include "hw/misc/aspeed_scu.h" +#include "hw/qdev-properties.h" +#include "qapi/error.h" +#include "qapi/visitor.h" +#include "qemu/bitops.h" +#include "trace.h" + +#define TO_REG(offset) ((offset) >> 2) + +#define PROT_KEY TO_REG(0x00) +#define SYS_RST_CTRL TO_REG(0x04) +#define CLK_SEL TO_REG(0x08) +#define CLK_STOP_CTRL TO_REG(0x0C) +#define FREQ_CNTR_CTRL TO_REG(0x10) +#define FREQ_CNTR_EVAL TO_REG(0x14) +#define IRQ_CTRL TO_REG(0x18) +#define D2PLL_PARAM TO_REG(0x1C) +#define MPLL_PARAM TO_REG(0x20) +#define HPLL_PARAM TO_REG(0x24) +#define FREQ_CNTR_RANGE TO_REG(0x28) +#define MISC_CTRL1 TO_REG(0x2C) +#define PCI_CTRL1 TO_REG(0x30) +#define PCI_CTRL2 TO_REG(0x34) +#define PCI_CTRL3 TO_REG(0x38) +#define SYS_RST_STATUS TO_REG(0x3C) +#define SOC_SCRATCH1 TO_REG(0x40) +#define SOC_SCRATCH2 TO_REG(0x44) +#define MAC_CLK_DELAY TO_REG(0x48) +#define MISC_CTRL2 TO_REG(0x4C) +#define VGA_SCRATCH1 TO_REG(0x50) +#define VGA_SCRATCH2 TO_REG(0x54) +#define VGA_SCRATCH3 TO_REG(0x58) +#define VGA_SCRATCH4 TO_REG(0x5C) +#define VGA_SCRATCH5 TO_REG(0x60) +#define VGA_SCRATCH6 TO_REG(0x64) +#define VGA_SCRATCH7 TO_REG(0x68) +#define VGA_SCRATCH8 TO_REG(0x6C) +#define HW_STRAP1 TO_REG(0x70) +#define RNG_CTRL TO_REG(0x74) +#define RNG_DATA TO_REG(0x78) +#define SILICON_REV TO_REG(0x7C) +#define PINMUX_CTRL1 TO_REG(0x80) +#define PINMUX_CTRL2 TO_REG(0x84) +#define PINMUX_CTRL3 TO_REG(0x88) +#define PINMUX_CTRL4 TO_REG(0x8C) +#define PINMUX_CTRL5 TO_REG(0x90) +#define PINMUX_CTRL6 TO_REG(0x94) +#define WDT_RST_CTRL TO_REG(0x9C) +#define PINMUX_CTRL7 TO_REG(0xA0) +#define PINMUX_CTRL8 TO_REG(0xA4) +#define PINMUX_CTRL9 TO_REG(0xA8) +#define WAKEUP_EN TO_REG(0xC0) +#define WAKEUP_CTRL TO_REG(0xC4) +#define HW_STRAP2 TO_REG(0xD0) +#define FREE_CNTR4 TO_REG(0xE0) +#define FREE_CNTR4_EXT TO_REG(0xE4) +#define CPU2_CTRL TO_REG(0x100) +#define CPU2_BASE_SEG1 TO_REG(0x104) +#define CPU2_BASE_SEG2 TO_REG(0x108) +#define CPU2_BASE_SEG3 TO_REG(0x10C) +#define CPU2_BASE_SEG4 TO_REG(0x110) +#define CPU2_BASE_SEG5 TO_REG(0x114) +#define CPU2_CACHE_CTRL TO_REG(0x118) +#define UART_HPLL_CLK TO_REG(0x160) +#define PCIE_CTRL TO_REG(0x180) +#define BMC_MMIO_CTRL TO_REG(0x184) +#define RELOC_DECODE_BASE1 TO_REG(0x188) +#define RELOC_DECODE_BASE2 TO_REG(0x18C) +#define MAILBOX_DECODE_BASE TO_REG(0x190) +#define SRAM_DECODE_BASE1 TO_REG(0x194) +#define SRAM_DECODE_BASE2 TO_REG(0x198) +#define BMC_REV TO_REG(0x19C) +#define BMC_DEV_ID TO_REG(0x1A4) + +#define PROT_KEY_UNLOCK 0x1688A8A8 +#define SCU_IO_REGION_SIZE 0x20000 + +#define AST2400_A0_SILICON_REV 0x02000303U + +static const uint32_t ast2400_a0_resets[ASPEED_SCU_NR_REGS] = { + [SYS_RST_CTRL] = 0xFFCFFEDCU, + [CLK_SEL] = 0xF3F40000U, + [CLK_STOP_CTRL] = 0x19FC3E8BU, + [D2PLL_PARAM] = 0x00026108U, + [MPLL_PARAM] = 0x00030291U, + [HPLL_PARAM] = 0x00000291U, + [MISC_CTRL1] = 0x00000010U, + [PCI_CTRL1] = 0x20001A03U, + [PCI_CTRL2] = 0x20001A03U, + [PCI_CTRL3] = 0x04000030U, + [SYS_RST_STATUS] = 0x00000001U, + [SOC_SCRATCH1] = 0x000000C0U, /* SoC completed DRAM init */ + [MISC_CTRL2] = 0x00000023U, + [RNG_CTRL] = 0x0000000EU, + [PINMUX_CTRL2] = 0x0000F000U, + [PINMUX_CTRL3] = 0x01000000U, + [PINMUX_CTRL4] = 0x000000FFU, + [PINMUX_CTRL5] = 0x0000A000U, + [WDT_RST_CTRL] = 0x003FFFF3U, + [PINMUX_CTRL8] = 0xFFFF0000U, + [PINMUX_CTRL9] = 0x000FFFFFU, + [FREE_CNTR4] = 0x000000FFU, + [FREE_CNTR4_EXT] = 0x000000FFU, + [CPU2_BASE_SEG1] = 0x80000000U, + [CPU2_BASE_SEG4] = 0x1E600000U, + [CPU2_BASE_SEG5] = 0xC0000000U, + [UART_HPLL_CLK] = 0x00001903U, + [PCIE_CTRL] = 0x0000007BU, + [BMC_DEV_ID] = 0x00002402U +}; + +static uint64_t aspeed_scu_read(void *opaque, hwaddr offset, unsigned size) +{ + AspeedSCUState *s = ASPEED_SCU(opaque); + int reg = TO_REG(offset); + + if (reg >= ARRAY_SIZE(s->regs)) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Out-of-bounds read at offset 0x%" HWADDR_PRIx "\n", + __func__, offset); + return 0; + } + + switch (reg) { + case WAKEUP_EN: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Read of write-only offset 0x%" HWADDR_PRIx "\n", + __func__, offset); + break; + } + + return s->regs[reg]; +} + +static void aspeed_scu_write(void *opaque, hwaddr offset, uint64_t data, + unsigned size) +{ + AspeedSCUState *s = ASPEED_SCU(opaque); + int reg = TO_REG(offset); + + if (reg >= ARRAY_SIZE(s->regs)) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Out-of-bounds write at offset 0x%" HWADDR_PRIx "\n", + __func__, offset); + return; + } + + if (reg > PROT_KEY && reg < CPU2_BASE_SEG1 && + s->regs[PROT_KEY] != PROT_KEY_UNLOCK) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: SCU is locked!\n", __func__); + return; + } + + trace_aspeed_scu_write(offset, size, data); + + switch (reg) { + case FREQ_CNTR_EVAL: + case VGA_SCRATCH1 ... VGA_SCRATCH8: + case RNG_DATA: + case SILICON_REV: + case FREE_CNTR4: + case FREE_CNTR4_EXT: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Write to read-only offset 0x%" HWADDR_PRIx "\n", + __func__, offset); + return; + } + + s->regs[reg] = data; +} + +static const MemoryRegionOps aspeed_scu_ops = { + .read = aspeed_scu_read, + .write = aspeed_scu_write, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid.min_access_size = 4, + .valid.max_access_size = 4, + .valid.unaligned = false, +}; + +static void aspeed_scu_reset(DeviceState *dev) +{ + AspeedSCUState *s = ASPEED_SCU(dev); + const uint32_t *reset; + + switch (s->silicon_rev) { + case AST2400_A0_SILICON_REV: + reset = ast2400_a0_resets; + break; + default: + g_assert_not_reached(); + } + + memcpy(s->regs, reset, sizeof(s->regs)); + s->regs[SILICON_REV] = s->silicon_rev; + s->regs[HW_STRAP1] = s->hw_strap1; + s->regs[HW_STRAP2] = s->hw_strap2; +} + +static uint32_t aspeed_silicon_revs[] = { AST2400_A0_SILICON_REV, }; + +static bool is_supported_silicon_rev(uint32_t silicon_rev) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(aspeed_silicon_revs); i++) { + if (silicon_rev == aspeed_silicon_revs[i]) { + return true; + } + } + + return false; +} + +static void aspeed_scu_realize(DeviceState *dev, Error **errp) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); + AspeedSCUState *s = ASPEED_SCU(dev); + + if (!is_supported_silicon_rev(s->silicon_rev)) { + error_setg(errp, "Unknown silicon revision: 0x%" PRIx32, + s->silicon_rev); + return; + } + + memory_region_init_io(&s->iomem, OBJECT(s), &aspeed_scu_ops, s, + TYPE_ASPEED_SCU, SCU_IO_REGION_SIZE); + + sysbus_init_mmio(sbd, &s->iomem); +} + +static const VMStateDescription vmstate_aspeed_scu = { + .name = "aspeed.scu", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, AspeedSCUState, ASPEED_SCU_NR_REGS), + VMSTATE_END_OF_LIST() + } +}; + +static Property aspeed_scu_properties[] = { + DEFINE_PROP_UINT32("silicon-rev", AspeedSCUState, silicon_rev, 0), + DEFINE_PROP_UINT32("hw-strap1", AspeedSCUState, hw_strap1, 0), + DEFINE_PROP_UINT32("hw-strap2", AspeedSCUState, hw_strap1, 0), + DEFINE_PROP_END_OF_LIST(), +}; + +static void aspeed_scu_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + dc->realize = aspeed_scu_realize; + dc->reset = aspeed_scu_reset; + dc->desc = "ASPEED System Control Unit"; + dc->vmsd = &vmstate_aspeed_scu; + dc->props = aspeed_scu_properties; +} + +static const TypeInfo aspeed_scu_info = { + .name = TYPE_ASPEED_SCU, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(AspeedSCUState), + .class_init = aspeed_scu_class_init, +}; + +static void aspeed_scu_register_types(void) +{ + type_register_static(&aspeed_scu_info); +} + +type_init(aspeed_scu_register_types); |