diff options
Diffstat (limited to 'hw/ppc/spapr_pci.c')
| -rw-r--r-- | hw/ppc/spapr_pci.c | 61 |
1 files changed, 27 insertions, 34 deletions
diff --git a/hw/ppc/spapr_pci.c b/hw/ppc/spapr_pci.c index 65be265b74..9b6ee32acf 100644 --- a/hw/ppc/spapr_pci.c +++ b/hw/ppc/spapr_pci.c @@ -250,11 +250,11 @@ static int spapr_msicfg_find(sPAPRPHBState *phb, uint32_t config_addr, * This is required for msi_notify()/msix_notify() which * will write at the addresses via spapr_msi_write(). */ -static void spapr_msi_setmsg(PCIDevice *pdev, hwaddr addr, - bool msix, unsigned req_num) +static void spapr_msi_setmsg(PCIDevice *pdev, hwaddr addr, bool msix, + unsigned first_irq, unsigned req_num) { unsigned i; - MSIMessage msg = { .address = addr, .data = 0 }; + MSIMessage msg = { .address = addr, .data = first_irq }; if (!msix) { msi_set_message(pdev, msg); @@ -262,8 +262,7 @@ static void spapr_msi_setmsg(PCIDevice *pdev, hwaddr addr, return; } - for (i = 0; i < req_num; ++i) { - msg.address = addr | (i << 2); + for (i = 0; i < req_num; ++i, ++msg.data) { msix_set_message(pdev, i, msg); trace_spapr_pci_msi_setup(pdev->name, i, msg.address); } @@ -343,7 +342,8 @@ static void rtas_ibm_change_msi(PowerPCCPU *cpu, sPAPREnvironment *spapr, /* There is no cached config, allocate MSIs */ if (!phb->msi_table[ndev].nvec) { - irq = spapr_allocate_irq_block(req_num, false); + irq = spapr_allocate_irq_block(req_num, false, + ret_intr_type == RTAS_TYPE_MSI); if (irq < 0) { fprintf(stderr, "Cannot allocate MSIs for device#%d", ndev); rtas_st(rets, 0, -1); /* Hardware error */ @@ -355,8 +355,8 @@ static void rtas_ibm_change_msi(PowerPCCPU *cpu, sPAPREnvironment *spapr, } /* Setup MSI/MSIX vectors in the device (via cfgspace or MSIX BAR) */ - spapr_msi_setmsg(pdev, phb->msi_win_addr | (ndev << 16), - ret_intr_type == RTAS_TYPE_MSIX, req_num); + spapr_msi_setmsg(pdev, spapr->msi_win_addr, ret_intr_type == RTAS_TYPE_MSIX, + phb->msi_table[ndev].irq, req_num); rtas_st(rets, 0, 0); rtas_st(rets, 1, req_num); @@ -442,10 +442,7 @@ static void pci_spapr_set_irq(void *opaque, int irq_num, int level) static void spapr_msi_write(void *opaque, hwaddr addr, uint64_t data, unsigned size) { - sPAPRPHBState *phb = opaque; - int ndev = addr >> 16; - int vec = ((addr & 0xFFFF) >> 2) | data; - uint32_t irq = phb->msi_table[ndev].irq + vec; + uint32_t irq = data; trace_spapr_pci_msi_write(addr, data, irq); @@ -459,6 +456,23 @@ static const MemoryRegionOps spapr_msi_ops = { .endianness = DEVICE_LITTLE_ENDIAN }; +void spapr_pci_msi_init(sPAPREnvironment *spapr, hwaddr addr) +{ + /* + * As MSI/MSIX interrupts trigger by writing at MSI/MSIX vectors, + * we need to allocate some memory to catch those writes coming + * from msi_notify()/msix_notify(). + * As MSIMessage:addr is going to be the same and MSIMessage:data + * is going to be a VIRQ number, 4 bytes of the MSI MR will only + * be used. + */ + spapr->msi_win_addr = addr; + memory_region_init_io(&spapr->msiwindow, NULL, &spapr_msi_ops, spapr, + "msi", getpagesize()); + memory_region_add_subregion(get_system_memory(), spapr->msi_win_addr, + &spapr->msiwindow); +} + /* * PHB PCI device */ @@ -484,8 +498,7 @@ static int spapr_phb_init(SysBusDevice *s) if ((sphb->buid != -1) || (sphb->dma_liobn != -1) || (sphb->mem_win_addr != -1) - || (sphb->io_win_addr != -1) - || (sphb->msi_win_addr != -1)) { + || (sphb->io_win_addr != -1)) { fprintf(stderr, "Either \"index\" or other parameters must" " be specified for PAPR PHB, not both\n"); return -1; @@ -498,7 +511,6 @@ static int spapr_phb_init(SysBusDevice *s) + sphb->index * SPAPR_PCI_WINDOW_SPACING; sphb->mem_win_addr = windows_base + SPAPR_PCI_MMIO_WIN_OFF; sphb->io_win_addr = windows_base + SPAPR_PCI_IO_WIN_OFF; - sphb->msi_win_addr = windows_base + SPAPR_PCI_MSI_WIN_OFF; } if (sphb->buid == -1) { @@ -521,11 +533,6 @@ static int spapr_phb_init(SysBusDevice *s) return -1; } - if (sphb->msi_win_addr == -1) { - fprintf(stderr, "MSI window address not specified for PHB\n"); - return -1; - } - if (find_phb(spapr, sphb->buid)) { fprintf(stderr, "PCI host bridges must have unique BUIDs\n"); return -1; @@ -565,18 +572,6 @@ static int spapr_phb_init(SysBusDevice *s) get_system_io(), 0, SPAPR_PCI_IO_WIN_SIZE); memory_region_add_subregion(get_system_memory(), sphb->io_win_addr, &sphb->iowindow); - - /* As MSI/MSIX interrupts trigger by writing at MSI/MSIX vectors, - * we need to allocate some memory to catch those writes coming - * from msi_notify()/msix_notify() */ - if (msi_supported) { - sprintf(namebuf, "%s.msi", sphb->dtbusname); - memory_region_init_io(&sphb->msiwindow, OBJECT(sphb), &spapr_msi_ops, sphb, - namebuf, SPAPR_MSIX_MAX_DEVS * 0x10000); - memory_region_add_subregion(get_system_memory(), sphb->msi_win_addr, - &sphb->msiwindow); - } - /* * Selecting a busname is more complex than you'd think, due to * interacting constraints. If the user has specified an id @@ -651,7 +646,6 @@ static Property spapr_phb_properties[] = { DEFINE_PROP_HEX64("io_win_addr", sPAPRPHBState, io_win_addr, -1), DEFINE_PROP_HEX64("io_win_size", sPAPRPHBState, io_win_size, SPAPR_PCI_IO_WIN_SIZE), - DEFINE_PROP_HEX64("msi_win_addr", sPAPRPHBState, msi_win_addr, -1), DEFINE_PROP_END_OF_LIST(), }; @@ -693,7 +687,6 @@ static const VMStateDescription vmstate_spapr_pci = { VMSTATE_UINT64_EQUAL(mem_win_size, sPAPRPHBState), VMSTATE_UINT64_EQUAL(io_win_addr, sPAPRPHBState), VMSTATE_UINT64_EQUAL(io_win_size, sPAPRPHBState), - VMSTATE_UINT64_EQUAL(msi_win_addr, sPAPRPHBState), VMSTATE_STRUCT_ARRAY(lsi_table, sPAPRPHBState, PCI_NUM_PINS, 0, vmstate_spapr_pci_lsi, struct spapr_pci_lsi), VMSTATE_STRUCT_ARRAY(msi_table, sPAPRPHBState, SPAPR_MSIX_MAX_DEVS, 0, |