summaryrefslogtreecommitdiff
path: root/hw/timer/pl031.c
diff options
context:
space:
mode:
Diffstat (limited to 'hw/timer/pl031.c')
-rw-r--r--hw/timer/pl031.c265
1 files changed, 265 insertions, 0 deletions
diff --git a/hw/timer/pl031.c b/hw/timer/pl031.c
new file mode 100644
index 0000000000..764940be7e
--- /dev/null
+++ b/hw/timer/pl031.c
@@ -0,0 +1,265 @@
+/*
+ * ARM AMBA PrimeCell PL031 RTC
+ *
+ * Copyright (c) 2007 CodeSourcery
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Contributions after 2012-01-13 are licensed under the terms of the
+ * GNU GPL, version 2 or (at your option) any later version.
+ */
+
+#include "hw/sysbus.h"
+#include "qemu/timer.h"
+#include "sysemu/sysemu.h"
+
+//#define DEBUG_PL031
+
+#ifdef DEBUG_PL031
+#define DPRINTF(fmt, ...) \
+do { printf("pl031: " fmt , ## __VA_ARGS__); } while (0)
+#else
+#define DPRINTF(fmt, ...) do {} while(0)
+#endif
+
+#define RTC_DR 0x00 /* Data read register */
+#define RTC_MR 0x04 /* Match register */
+#define RTC_LR 0x08 /* Data load register */
+#define RTC_CR 0x0c /* Control register */
+#define RTC_IMSC 0x10 /* Interrupt mask and set register */
+#define RTC_RIS 0x14 /* Raw interrupt status register */
+#define RTC_MIS 0x18 /* Masked interrupt status register */
+#define RTC_ICR 0x1c /* Interrupt clear register */
+
+typedef struct {
+ SysBusDevice busdev;
+ MemoryRegion iomem;
+ QEMUTimer *timer;
+ qemu_irq irq;
+
+ /* Needed to preserve the tick_count across migration, even if the
+ * absolute value of the rtc_clock is different on the source and
+ * destination.
+ */
+ uint32_t tick_offset_vmstate;
+ uint32_t tick_offset;
+
+ uint32_t mr;
+ uint32_t lr;
+ uint32_t cr;
+ uint32_t im;
+ uint32_t is;
+} pl031_state;
+
+static const unsigned char pl031_id[] = {
+ 0x31, 0x10, 0x14, 0x00, /* Device ID */
+ 0x0d, 0xf0, 0x05, 0xb1 /* Cell ID */
+};
+
+static void pl031_update(pl031_state *s)
+{
+ qemu_set_irq(s->irq, s->is & s->im);
+}
+
+static void pl031_interrupt(void * opaque)
+{
+ pl031_state *s = (pl031_state *)opaque;
+
+ s->is = 1;
+ DPRINTF("Alarm raised\n");
+ pl031_update(s);
+}
+
+static uint32_t pl031_get_count(pl031_state *s)
+{
+ int64_t now = qemu_get_clock_ns(rtc_clock);
+ return s->tick_offset + now / get_ticks_per_sec();
+}
+
+static void pl031_set_alarm(pl031_state *s)
+{
+ uint32_t ticks;
+
+ /* The timer wraps around. This subtraction also wraps in the same way,
+ and gives correct results when alarm < now_ticks. */
+ ticks = s->mr - pl031_get_count(s);
+ DPRINTF("Alarm set in %ud ticks\n", ticks);
+ if (ticks == 0) {
+ qemu_del_timer(s->timer);
+ pl031_interrupt(s);
+ } else {
+ int64_t now = qemu_get_clock_ns(rtc_clock);
+ qemu_mod_timer(s->timer, now + (int64_t)ticks * get_ticks_per_sec());
+ }
+}
+
+static uint64_t pl031_read(void *opaque, hwaddr offset,
+ unsigned size)
+{
+ pl031_state *s = (pl031_state *)opaque;
+
+ if (offset >= 0xfe0 && offset < 0x1000)
+ return pl031_id[(offset - 0xfe0) >> 2];
+
+ switch (offset) {
+ case RTC_DR:
+ return pl031_get_count(s);
+ case RTC_MR:
+ return s->mr;
+ case RTC_IMSC:
+ return s->im;
+ case RTC_RIS:
+ return s->is;
+ case RTC_LR:
+ return s->lr;
+ case RTC_CR:
+ /* RTC is permanently enabled. */
+ return 1;
+ case RTC_MIS:
+ return s->is & s->im;
+ case RTC_ICR:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "pl031: read of write-only register at offset 0x%x\n",
+ (int)offset);
+ break;
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "pl031_read: Bad offset 0x%x\n", (int)offset);
+ break;
+ }
+
+ return 0;
+}
+
+static void pl031_write(void * opaque, hwaddr offset,
+ uint64_t value, unsigned size)
+{
+ pl031_state *s = (pl031_state *)opaque;
+
+
+ switch (offset) {
+ case RTC_LR:
+ s->tick_offset += value - pl031_get_count(s);
+ pl031_set_alarm(s);
+ break;
+ case RTC_MR:
+ s->mr = value;
+ pl031_set_alarm(s);
+ break;
+ case RTC_IMSC:
+ s->im = value & 1;
+ DPRINTF("Interrupt mask %d\n", s->im);
+ pl031_update(s);
+ break;
+ case RTC_ICR:
+ /* The PL031 documentation (DDI0224B) states that the interrupt is
+ cleared when bit 0 of the written value is set. However the
+ arm926e documentation (DDI0287B) states that the interrupt is
+ cleared when any value is written. */
+ DPRINTF("Interrupt cleared");
+ s->is = 0;
+ pl031_update(s);
+ break;
+ case RTC_CR:
+ /* Written value is ignored. */
+ break;
+
+ case RTC_DR:
+ case RTC_MIS:
+ case RTC_RIS:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "pl031: write to read-only register at offset 0x%x\n",
+ (int)offset);
+ break;
+
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "pl031_write: Bad offset 0x%x\n", (int)offset);
+ break;
+ }
+}
+
+static const MemoryRegionOps pl031_ops = {
+ .read = pl031_read,
+ .write = pl031_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static int pl031_init(SysBusDevice *dev)
+{
+ pl031_state *s = FROM_SYSBUS(pl031_state, dev);
+ struct tm tm;
+
+ memory_region_init_io(&s->iomem, &pl031_ops, s, "pl031", 0x1000);
+ sysbus_init_mmio(dev, &s->iomem);
+
+ sysbus_init_irq(dev, &s->irq);
+ qemu_get_timedate(&tm, 0);
+ s->tick_offset = mktimegm(&tm) - qemu_get_clock_ns(rtc_clock) / get_ticks_per_sec();
+
+ s->timer = qemu_new_timer_ns(rtc_clock, pl031_interrupt, s);
+ return 0;
+}
+
+static void pl031_pre_save(void *opaque)
+{
+ pl031_state *s = opaque;
+
+ /* tick_offset is base_time - rtc_clock base time. Instead, we want to
+ * store the base time relative to the vm_clock for backwards-compatibility. */
+ int64_t delta = qemu_get_clock_ns(rtc_clock) - qemu_get_clock_ns(vm_clock);
+ s->tick_offset_vmstate = s->tick_offset + delta / get_ticks_per_sec();
+}
+
+static int pl031_post_load(void *opaque, int version_id)
+{
+ pl031_state *s = opaque;
+
+ int64_t delta = qemu_get_clock_ns(rtc_clock) - qemu_get_clock_ns(vm_clock);
+ s->tick_offset = s->tick_offset_vmstate - delta / get_ticks_per_sec();
+ pl031_set_alarm(s);
+ return 0;
+}
+
+static const VMStateDescription vmstate_pl031 = {
+ .name = "pl031",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .pre_save = pl031_pre_save,
+ .post_load = pl031_post_load,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT32(tick_offset_vmstate, pl031_state),
+ VMSTATE_UINT32(mr, pl031_state),
+ VMSTATE_UINT32(lr, pl031_state),
+ VMSTATE_UINT32(cr, pl031_state),
+ VMSTATE_UINT32(im, pl031_state),
+ VMSTATE_UINT32(is, pl031_state),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static void pl031_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
+
+ k->init = pl031_init;
+ dc->no_user = 1;
+ dc->vmsd = &vmstate_pl031;
+}
+
+static const TypeInfo pl031_info = {
+ .name = "pl031",
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(pl031_state),
+ .class_init = pl031_class_init,
+};
+
+static void pl031_register_types(void)
+{
+ type_register_static(&pl031_info);
+}
+
+type_init(pl031_register_types)