diff options
Diffstat (limited to 'hw/usb')
| -rw-r--r-- | hw/usb/host-bsd.c | 639 | ||||
| -rw-r--r-- | hw/usb/host-linux.c | 1911 |
2 files changed, 0 insertions, 2550 deletions
diff --git a/hw/usb/host-bsd.c b/hw/usb/host-bsd.c deleted file mode 100644 index 39f22810b3..0000000000 --- a/hw/usb/host-bsd.c +++ /dev/null @@ -1,639 +0,0 @@ -/* - * BSD host USB redirector - * - * Copyright (c) 2006 Lonnie Mendez - * Portions of code and concepts borrowed from - * usb-linux.c and libusb's bsd.c and are copyright their respective owners. - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - */ - -#include "qemu-common.h" -#include "monitor/monitor.h" -#include "hw/usb.h" - -/* usb.h declares these */ -#undef USB_SPEED_HIGH -#undef USB_SPEED_FULL -#undef USB_SPEED_LOW - -#include <sys/ioctl.h> -#ifndef __DragonFly__ -#include <dev/usb/usb.h> -#else -#include <bus/usb/usb.h> -#endif - -/* This value has maximum potential at 16. - * You should also set hw.usb.debug to gain - * more detailed view. - */ -//#define DEBUG -#define UGEN_DEBUG_LEVEL 0 - - -typedef int USBScanFunc(void *opaque, int bus_num, int addr, int class_id, - int vendor_id, int product_id, - const char *product_name, int speed); -static int usb_host_find_device(int *pbus_num, int *paddr, - const char *devname); - -typedef struct USBHostDevice { - USBDevice dev; - int ep_fd[USB_MAX_ENDPOINTS]; - int devfd; - char devpath[32]; -} USBHostDevice; - - -static int ensure_ep_open(USBHostDevice *dev, int ep, int mode) -{ - char buf[32]; - int fd; - - /* Get the address for this endpoint */ - ep = UE_GET_ADDR(ep); - - if (dev->ep_fd[ep] < 0) { -#if defined(__FreeBSD__) || defined(__DragonFly__) - snprintf(buf, sizeof(buf) - 1, "%s.%d", dev->devpath, ep); -#else - snprintf(buf, sizeof(buf) - 1, "%s.%02d", dev->devpath, ep); -#endif - /* Try to open it O_RDWR first for those devices which have in and out - * endpoints with the same address (eg 0x02 and 0x82) - */ - fd = open(buf, O_RDWR); - if (fd < 0 && errno == ENXIO) - fd = open(buf, mode); - if (fd < 0) { -#ifdef DEBUG - printf("ensure_ep_open: failed to open device endpoint %s: %s\n", - buf, strerror(errno)); -#endif - } - dev->ep_fd[ep] = fd; - } - - return dev->ep_fd[ep]; -} - -static void ensure_eps_closed(USBHostDevice *dev) -{ - int epnum = 1; - - if (!dev) - return; - - while (epnum < USB_MAX_ENDPOINTS) { - if (dev->ep_fd[epnum] >= 0) { - close(dev->ep_fd[epnum]); - dev->ep_fd[epnum] = -1; - } - epnum++; - } -} - -static void usb_host_handle_reset(USBDevice *dev) -{ -#if 0 - USBHostDevice *s = (USBHostDevice *)dev; -#endif -} - -/* XXX: - * -check device states against transfer requests - * and return appropriate response - */ -static void usb_host_handle_control(USBDevice *dev, - USBPacket *p, - int request, - int value, - int index, - int length, - uint8_t *data) -{ - USBHostDevice *s = (USBHostDevice *)dev; - struct usb_ctl_request req; - struct usb_alt_interface aiface; - int ret, timeout = 50; - - if ((request >> 8) == UT_WRITE_DEVICE && - (request & 0xff) == UR_SET_ADDRESS) { - - /* specific SET_ADDRESS support */ - dev->addr = value; - } else if ((request >> 8) == UT_WRITE_DEVICE && - (request & 0xff) == UR_SET_CONFIG) { - - ensure_eps_closed(s); /* can't do this without all eps closed */ - - ret = ioctl(s->devfd, USB_SET_CONFIG, &value); - if (ret < 0) { -#ifdef DEBUG - printf("handle_control: failed to set configuration - %s\n", - strerror(errno)); -#endif - p->status = USB_RET_STALL; - } - } else if ((request >> 8) == UT_WRITE_INTERFACE && - (request & 0xff) == UR_SET_INTERFACE) { - - aiface.uai_interface_index = index; - aiface.uai_alt_no = value; - - ensure_eps_closed(s); /* can't do this without all eps closed */ - ret = ioctl(s->devfd, USB_SET_ALTINTERFACE, &aiface); - if (ret < 0) { -#ifdef DEBUG - printf("handle_control: failed to set alternate interface - %s\n", - strerror(errno)); -#endif - p->status = USB_RET_STALL; - } - } else { - req.ucr_request.bmRequestType = request >> 8; - req.ucr_request.bRequest = request & 0xff; - USETW(req.ucr_request.wValue, value); - USETW(req.ucr_request.wIndex, index); - USETW(req.ucr_request.wLength, length); - req.ucr_data = data; - req.ucr_flags = USBD_SHORT_XFER_OK; - - ret = ioctl(s->devfd, USB_SET_TIMEOUT, &timeout); -#if defined(__NetBSD__) || defined(__OpenBSD__) - if (ret < 0 && errno != EINVAL) { -#else - if (ret < 0) { -#endif -#ifdef DEBUG - printf("handle_control: setting timeout failed - %s\n", - strerror(errno)); -#endif - } - - ret = ioctl(s->devfd, USB_DO_REQUEST, &req); - /* ugen returns EIO for usbd_do_request_ no matter what - * happens with the transfer */ - if (ret < 0) { -#ifdef DEBUG - printf("handle_control: error after request - %s\n", - strerror(errno)); -#endif - p->status = USB_RET_NAK; /* STALL */ - } else { - p->actual_length = req.ucr_actlen; - } - } -} - -static void usb_host_handle_data(USBDevice *dev, USBPacket *p) -{ - USBHostDevice *s = (USBHostDevice *)dev; - int ret, fd, mode; - int one = 1, shortpacket = 0, timeout = 50; - sigset_t new_mask, old_mask; - uint8_t devep = p->ep->nr; - - /* protect data transfers from SIGALRM signal */ - sigemptyset(&new_mask); - sigaddset(&new_mask, SIGALRM); - sigprocmask(SIG_BLOCK, &new_mask, &old_mask); - - if (p->pid == USB_TOKEN_IN) { - devep |= 0x80; - mode = O_RDONLY; - shortpacket = 1; - } else { - mode = O_WRONLY; - } - - fd = ensure_ep_open(s, devep, mode); - if (fd < 0) { - sigprocmask(SIG_SETMASK, &old_mask, NULL); - p->status = USB_RET_NODEV; - return; - } - - if (ioctl(fd, USB_SET_TIMEOUT, &timeout) < 0) { -#ifdef DEBUG - printf("handle_data: failed to set timeout - %s\n", - strerror(errno)); -#endif - } - - if (shortpacket) { - if (ioctl(fd, USB_SET_SHORT_XFER, &one) < 0) { -#ifdef DEBUG - printf("handle_data: failed to set short xfer mode - %s\n", - strerror(errno)); -#endif - sigprocmask(SIG_SETMASK, &old_mask, NULL); - } - } - - if (p->pid == USB_TOKEN_IN) - ret = readv(fd, p->iov.iov, p->iov.niov); - else - ret = writev(fd, p->iov.iov, p->iov.niov); - - sigprocmask(SIG_SETMASK, &old_mask, NULL); - - if (ret < 0) { -#ifdef DEBUG - printf("handle_data: error after %s data - %s\n", - pid == USB_TOKEN_IN ? "reading" : "writing", strerror(errno)); -#endif - switch(errno) { - case ETIMEDOUT: - case EINTR: - p->status = USB_RET_NAK; - break; - default: - p->status = USB_RET_STALL; - } - } else { - p->actual_length = ret; - } -} - -static void usb_host_handle_destroy(USBDevice *opaque) -{ - USBHostDevice *s = (USBHostDevice *)opaque; - int i; - - for (i = 0; i < USB_MAX_ENDPOINTS; i++) - if (s->ep_fd[i] >= 0) - close(s->ep_fd[i]); - - if (s->devfd < 0) - return; - - close(s->devfd); - - g_free(s); -} - -static int usb_host_initfn(USBDevice *dev) -{ - dev->flags |= (1 << USB_DEV_FLAG_IS_HOST); - return 0; -} - -USBDevice *usb_host_device_open(USBBus *guest_bus, const char *devname) -{ - struct usb_device_info bus_info, dev_info; - USBDevice *d = NULL, *ret = NULL; - USBHostDevice *dev; - char ctlpath[PATH_MAX + 1]; - char buspath[PATH_MAX + 1]; - int bfd, dfd, bus, address, i; - int ugendebug = UGEN_DEBUG_LEVEL; - - if (usb_host_find_device(&bus, &address, devname) < 0) { - goto fail; - } - - snprintf(buspath, PATH_MAX, "/dev/usb%d", bus); - - bfd = open(buspath, O_RDWR); - if (bfd < 0) { -#ifdef DEBUG - printf("usb_host_device_open: failed to open usb bus - %s\n", - strerror(errno)); -#endif - goto fail; - } - - bus_info.udi_addr = address; - if (ioctl(bfd, USB_DEVICEINFO, &bus_info) < 0) { -#ifdef DEBUG - printf("usb_host_device_open: failed to grab bus information - %s\n", - strerror(errno)); -#endif - goto fail_bfd; - } - -#if defined(__FreeBSD__) || defined(__FreeBSD_kernel__) || defined(__DragonFly__) - snprintf(ctlpath, PATH_MAX, "/dev/%s", bus_info.udi_devnames[0]); -#else - snprintf(ctlpath, PATH_MAX, "/dev/%s.00", bus_info.udi_devnames[0]); -#endif - - dfd = open(ctlpath, O_RDWR); - if (dfd < 0) { - dfd = open(ctlpath, O_RDONLY); - if (dfd < 0) { -#ifdef DEBUG - printf("usb_host_device_open: failed to open usb device %s - %s\n", - ctlpath, strerror(errno)); -#endif - } - goto fail_dfd; - } - - if (ioctl(dfd, USB_GET_DEVICEINFO, &dev_info) < 0) { -#ifdef DEBUG - printf("usb_host_device_open: failed to grab device info - %s\n", - strerror(errno)); -#endif - goto fail_dfd; - } - - d = usb_create(guest_bus, "usb-host"); - dev = DO_UPCAST(USBHostDevice, dev, d); - - if (dev_info.udi_speed == 1) { - dev->dev.speed = USB_SPEED_LOW - 1; - dev->dev.speedmask = USB_SPEED_MASK_LOW; - } else { - dev->dev.speed = USB_SPEED_FULL - 1; - dev->dev.speedmask = USB_SPEED_MASK_FULL; - } - - if (strncmp(dev_info.udi_product, "product", 7) != 0) { - pstrcpy(dev->dev.product_desc, sizeof(dev->dev.product_desc), - dev_info.udi_product); - } else { - snprintf(dev->dev.product_desc, sizeof(dev->dev.product_desc), - "host:%s", devname); - } - - pstrcpy(dev->devpath, sizeof(dev->devpath), "/dev/"); - pstrcat(dev->devpath, sizeof(dev->devpath), dev_info.udi_devnames[0]); - - /* Mark the endpoints as not yet open */ - for (i = 0; i < USB_MAX_ENDPOINTS; i++) { - dev->ep_fd[i] = -1; - } - - ioctl(dfd, USB_SETDEBUG, &ugendebug); - - ret = (USBDevice *)dev; - -fail_dfd: - close(dfd); -fail_bfd: - close(bfd); -fail: - return ret; -} - -static void usb_host_class_initfn(ObjectClass *klass, void *data) -{ - USBDeviceClass *uc = USB_DEVICE_CLASS(klass); - - uc->product_desc = "USB Host Device"; - uc->init = usb_host_initfn; - uc->handle_reset = usb_host_handle_reset; - uc->handle_control = usb_host_handle_control; - uc->handle_data = usb_host_handle_data; - uc->handle_destroy = usb_host_handle_destroy; -} - -static const TypeInfo usb_host_dev_info = { - .name = "usb-host", - .parent = TYPE_USB_DEVICE, - .instance_size = sizeof(USBHostDevice), - .class_init = usb_host_class_initfn, -}; - -static void usb_host_register_types(void) -{ - type_register_static(&usb_host_dev_info); -} - -type_init(usb_host_register_types) - -static int usb_host_scan(void *opaque, USBScanFunc *func) -{ - struct usb_device_info bus_info; - struct usb_device_info dev_info; - uint16_t vendor_id, product_id, class_id, speed; - int bfd, dfd, bus, address; - char busbuf[20], devbuf[20], product_name[256]; - int ret = 0; - - for (bus = 0; bus < 10; bus++) { - - snprintf(busbuf, sizeof(busbuf) - 1, "/dev/usb%d", bus); - bfd = open(busbuf, O_RDWR); - if (bfd < 0) - continue; - - for (address = 1; address < 127; address++) { - - bus_info.udi_addr = address; - if (ioctl(bfd, USB_DEVICEINFO, &bus_info) < 0) - continue; - - /* only list devices that can be used by generic layer */ - if (strncmp(bus_info.udi_devnames[0], "ugen", 4) != 0) - continue; - -#if defined(__FreeBSD__) || defined(__FreeBSD_kernel__) || defined(__DragonFly__) - snprintf(devbuf, sizeof(devbuf) - 1, "/dev/%s", bus_info.udi_devnames[0]); -#else - snprintf(devbuf, sizeof(devbuf) - 1, "/dev/%s.00", bus_info.udi_devnames[0]); -#endif - - dfd = open(devbuf, O_RDONLY); - if (dfd < 0) { -#ifdef DEBUG - printf("usb_host_scan: couldn't open device %s - %s\n", devbuf, - strerror(errno)); -#endif - continue; - } - - if (ioctl(dfd, USB_GET_DEVICEINFO, &dev_info) < 0) - printf("usb_host_scan: couldn't get device information for %s - %s\n", - devbuf, strerror(errno)); - - /* XXX: might need to fixup endianness of word values before copying over */ - - vendor_id = dev_info.udi_vendorNo; - product_id = dev_info.udi_productNo; - class_id = dev_info.udi_class; - speed = dev_info.udi_speed; - - if (strncmp(dev_info.udi_product, "product", 7) != 0) - pstrcpy(product_name, sizeof(product_name), - dev_info.udi_product); - else - product_name[0] = '\0'; - - ret = func(opaque, bus, address, class_id, vendor_id, - product_id, product_name, speed); - - close(dfd); - - if (ret) - goto the_end; - } - - close(bfd); - } - -the_end: - return ret; -} - -typedef struct FindDeviceState { - int vendor_id; - int product_id; - int bus_num; - int addr; -} FindDeviceState; - -static int usb_host_find_device_scan(void *opaque, int bus_num, int addr, - int class_id, - int vendor_id, int product_id, - const char *product_name, int speed) -{ - FindDeviceState *s = opaque; - if (vendor_id == s->vendor_id && - product_id == s->product_id) { - s->bus_num = bus_num; - s->addr = addr; - return 1; - } else { - return 0; - } -} - - -/* the syntax is : - 'bus.addr' (decimal numbers) or - 'vendor_id:product_id' (hexa numbers) */ -static int usb_host_find_device(int *pbus_num, int *paddr, - const char *devname) -{ - const char *p; - int ret; - FindDeviceState fs; - - p = strchr(devname, '.'); - if (p) { - *pbus_num = strtoul(devname, NULL, 0); - *paddr = strtoul(p + 1, NULL, 0); - return 0; - } - p = strchr(devname, ':'); - if (p) { - fs.vendor_id = strtoul(devname, NULL, 16); - fs.product_id = strtoul(p + 1, NULL, 16); - ret = usb_host_scan(&fs, usb_host_find_device_scan); - if (ret) { - *pbus_num = fs.bus_num; - *paddr = fs.addr; - return 0; - } - } - return -1; -} - -/**********************/ -/* USB host device info */ - -struct usb_class_info { - int class; - const char *class_name; -}; - -static const struct usb_class_info usb_class_info[] = { - { USB_CLASS_AUDIO, "Audio"}, - { USB_CLASS_COMM, "Communication"}, - { USB_CLASS_HID, "HID"}, - { USB_CLASS_HUB, "Hub" }, - { USB_CLASS_PHYSICAL, "Physical" }, - { USB_CLASS_PRINTER, "Printer" }, - { USB_CLASS_MASS_STORAGE, "Storage" }, - { USB_CLASS_CDC_DATA, "Data" }, - { USB_CLASS_APP_SPEC, "Application Specific" }, - { USB_CLASS_VENDOR_SPEC, "Vendor Specific" }, - { USB_CLASS_STILL_IMAGE, "Still Image" }, - { USB_CLASS_CSCID, "Smart Card" }, - { USB_CLASS_CONTENT_SEC, "Content Security" }, - { -1, NULL } -}; - -static const char *usb_class_str(uint8_t class) -{ - const struct usb_class_info *p; - for (p = usb_class_info; p->class != -1; p++) { - if (p->class == class) - break; - } - return p->class_name; -} - -static void usb_info_device(Monitor *mon, int bus_num, int addr, int class_id, - int vendor_id, int product_id, - const char *product_name, - int speed) -{ - const char *class_str, *speed_str; - - switch(speed) { - case USB_SPEED_LOW: - speed_str = "1.5"; - break; - case USB_SPEED_FULL: - speed_str = "12"; - break; - case USB_SPEED_HIGH: - speed_str = "480"; - break; - default: - speed_str = "?"; - break; - } - - monitor_printf(mon, " Device %d.%d, speed %s Mb/s\n", - bus_num, addr, speed_str); - class_str = usb_class_str(class_id); - if (class_str) - monitor_printf(mon, " %s:", class_str); - else - monitor_printf(mon, " Class %02x:", class_id); - monitor_printf(mon, " USB device %04x:%04x", vendor_id, product_id); - if (product_name[0] != '\0') - monitor_printf(mon, ", %s", product_name); - monitor_printf(mon, "\n"); -} - -static int usb_host_info_device(void *opaque, - int bus_num, int addr, - int class_id, - int vendor_id, int product_id, - const char *product_name, - int speed) -{ - Monitor *mon = opaque; - - usb_info_device(mon, bus_num, addr, class_id, vendor_id, product_id, - product_name, speed); - return 0; -} - -void usb_host_info(Monitor *mon, const QDict *qdict) -{ - usb_host_scan(mon, usb_host_info_device); -} diff --git a/hw/usb/host-linux.c b/hw/usb/host-linux.c deleted file mode 100644 index 65cd3b444c..0000000000 --- a/hw/usb/host-linux.c +++ /dev/null @@ -1,1911 +0,0 @@ -/* - * Linux host USB redirector - * - * Copyright (c) 2005 Fabrice Bellard - * - * Copyright (c) 2008 Max Krasnyansky - * Support for host device auto connect & disconnect - * Major rewrite to support fully async operation - * - * Copyright 2008 TJ <linux@tjworld.net> - * Added flexible support for /dev/bus/usb /sys/bus/usb/devices in addition - * to the legacy /proc/bus/usb USB device discovery and handling - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - */ - -#include "qemu-common.h" -#include "qemu/timer.h" -#include "monitor/monitor.h" -#include "sysemu/sysemu.h" -#include "trace.h" - -#include <dirent.h> -#include <sys/ioctl.h> - -#include <linux/usbdevice_fs.h> -#include <linux/version.h> -#include "hw/usb.h" -#include "hw/usb/desc.h" -#include "hw/usb/host.h" - -#ifdef CONFIG_USB_LIBUSB -# define DEVNAME "usb-host-linux" -#else -# define DEVNAME "usb-host" -#endif - -/* We redefine it to avoid version problems */ -struct usb_ctrltransfer { - uint8_t bRequestType; - uint8_t bRequest; - uint16_t wValue; - uint16_t wIndex; - uint16_t wLength; - uint32_t timeout; - void *data; -}; - -typedef int USBScanFunc(void *opaque, int bus_num, int addr, const char *port, - int class_id, int vendor_id, int product_id, - const char *product_name, int speed); - -//#define DEBUG - -#ifdef DEBUG -#define DPRINTF printf -#else -#define DPRINTF(...) -#endif - -#define PRODUCT_NAME_SZ 32 -#define MAX_PORTLEN 16 - -/* endpoint association data */ -#define ISO_FRAME_DESC_PER_URB 32 - -/* devio.c limits single requests to 16k */ -#define MAX_USBFS_BUFFER_SIZE 16384 - -typedef struct AsyncURB AsyncURB; - -struct endp_data { - uint8_t halted; - uint8_t iso_started; - AsyncURB *iso_urb; - int iso_urb_idx; - int iso_buffer_used; - int inflight; -}; - -enum USBHostDeviceOptions { - USB_HOST_OPT_PIPELINE, -}; - -typedef struct USBHostDevice { - USBDevice dev; - int fd; - int hub_fd; - int hub_port; - - uint8_t descr[8192]; - int descr_len; - int closing; - uint32_t iso_urb_count; - uint32_t options; - Notifier exit; - QEMUBH *bh; - - struct endp_data ep_in[USB_MAX_ENDPOINTS]; - struct endp_data ep_out[USB_MAX_ENDPOINTS]; - QLIST_HEAD(, AsyncURB) aurbs; - - /* Host side address */ - int bus_num; - int addr; - char port[MAX_PORTLEN]; - struct USBAutoFilter match; - int32_t bootindex; - int seen, errcount; - - QTAILQ_ENTRY(USBHostDevice) next; -} USBHostDevice; - -static QTAILQ_HEAD(, USBHostDevice) hostdevs = QTAILQ_HEAD_INITIALIZER(hostdevs); - -static int usb_host_close(USBHostDevice *dev); -static void usb_host_auto_check(void *unused); -static int usb_host_read_file(char *line, size_t line_size, - const char *device_file, const char *device_name); -static void usb_linux_update_endp_table(USBHostDevice *s); - -static int usb_host_usbfs_type(USBHostDevice *s, USBPacket *p) -{ - static const int usbfs[] = { - [USB_ENDPOINT_XFER_CONTROL] = USBDEVFS_URB_TYPE_CONTROL, - [USB_ENDPOINT_XFER_ISOC] = USBDEVFS_URB_TYPE_ISO, - [USB_ENDPOINT_XFER_BULK] = USBDEVFS_URB_TYPE_BULK, - [USB_ENDPOINT_XFER_INT] = USBDEVFS_URB_TYPE_INTERRUPT, - }; - uint8_t type = p->ep->type; - assert(type < ARRAY_SIZE(usbfs)); - return usbfs[type]; -} - -static int usb_host_do_reset(USBHostDevice *dev) -{ - struct timeval s, e; - uint32_t usecs; - int ret; - - gettimeofday(&s, NULL); - ret = ioctl(dev->fd, USBDEVFS_RESET); - gettimeofday(&e, NULL); - usecs = (e.tv_sec - s.tv_sec) * 1000000; - usecs += e.tv_usec - s.tv_usec; - if (usecs > 1000000) { - /* more than a second, something is fishy, broken usb device? */ - fprintf(stderr, "husb: device %d:%d reset took %d.%06d seconds\n", - dev->bus_num, dev->addr, usecs / 1000000, usecs % 1000000); - } - return ret; -} - -static struct endp_data *get_endp(USBHostDevice *s, int pid, int ep) -{ - struct endp_data *eps = pid == USB_TOKEN_IN ? s->ep_in : s->ep_out; - assert(pid == USB_TOKEN_IN || pid == USB_TOKEN_OUT); - assert(ep > 0 && ep <= USB_MAX_ENDPOINTS); - return eps + ep - 1; -} - -static int is_isoc(USBHostDevice *s, int pid, int ep) -{ - return usb_ep_get_type(&s->dev, pid, ep) == USB_ENDPOINT_XFER_ISOC; -} - -static int is_valid(USBHostDevice *s, int pid, int ep) -{ - return usb_ep_get_type(&s->dev, pid, ep) != USB_ENDPOINT_XFER_INVALID; -} - -static int is_halted(USBHostDevice *s, int pid, int ep) -{ - return get_endp(s, pid, ep)->halted; -} - -static void clear_halt(USBHostDevice *s, int pid, int ep) -{ - trace_usb_host_ep_clear_halt(s->bus_num, s->addr, ep); - get_endp(s, pid, ep)->halted = 0; -} - -static void set_halt(USBHostDevice *s, int pid, int ep) -{ - if (ep != 0) { - trace_usb_host_ep_set_halt(s->bus_num, s->addr, ep); - get_endp(s, pid, ep)->halted = 1; - } -} - -static int is_iso_started(USBHostDevice *s, int pid, int ep) -{ - return get_endp(s, pid, ep)->iso_started; -} - -static void clear_iso_started(USBHostDevice *s, int pid, int ep) -{ - trace_usb_host_iso_stop(s->bus_num, s->addr, ep); - get_endp(s, pid, ep)->iso_started = 0; -} - -static void set_iso_started(USBHostDevice *s, int pid, int ep) -{ - struct endp_data *e = get_endp(s, pid, ep); - - trace_usb_host_iso_start(s->bus_num, s->addr, ep); - if (!e->iso_started) { - e->iso_started = 1; - e->inflight = 0; - } -} - -static int change_iso_inflight(USBHostDevice *s, int pid, int ep, int value) -{ - struct endp_data *e = get_endp(s, pid, ep); - - e->inflight += value; - return e->inflight; -} - -static void set_iso_urb(USBHostDevice *s, int pid, int ep, AsyncURB *iso_urb) -{ - get_endp(s, pid, ep)->iso_urb = iso_urb; -} - -static AsyncURB *get_iso_urb(USBHostDevice *s, int pid, int ep) -{ - return get_endp(s, pid, ep)->iso_urb; -} - -static void set_iso_urb_idx(USBHostDevice *s, int pid, int ep, int i) -{ - get_endp(s, pid, ep)->iso_urb_idx = i; -} - -static int get_iso_urb_idx(USBHostDevice *s, int pid, int ep) -{ - return get_endp(s, pid, ep)->iso_urb_idx; -} - -static void set_iso_buffer_used(USBHostDevice *s, int pid, int ep, int i) -{ - get_endp(s, pid, ep)->iso_buffer_used = i; -} - -static int get_iso_buffer_used(USBHostDevice *s, int pid, int ep) -{ - return get_endp(s, pid, ep)->iso_buffer_used; -} - -/* - * Async URB state. - * We always allocate iso packet descriptors even for bulk transfers - * to simplify allocation and casts. - */ -struct AsyncURB -{ - struct usbdevfs_urb urb; - struct usbdevfs_iso_packet_desc isocpd[ISO_FRAME_DESC_PER_URB]; - USBHostDevice *hdev; - QLIST_ENTRY(AsyncURB) next; - - /* For regular async urbs */ - USBPacket *packet; - int more; /* large transfer, more urbs follow */ - - /* For buffered iso handling */ - int iso_frame_idx; /* -1 means in flight */ -}; - -static AsyncURB *async_alloc(USBHostDevice *s) -{ - AsyncURB *aurb = g_malloc0(sizeof(AsyncURB)); - aurb->hdev = s; - QLIST_INSERT_HEAD(&s->aurbs, aurb, next); - return aurb; -} - -static void async_free(AsyncURB *aurb) -{ - QLIST_REMOVE(aurb, next); - g_free(aurb); -} - -static void do_disconnect(USBHostDevice *s) -{ - usb_host_close(s); - usb_host_auto_check(NULL); -} - -static void async_complete(void *opaque) -{ - USBHostDevice *s = opaque; - AsyncURB *aurb; - int urbs = 0; - - while (1) { - USBPacket *p; - - int r = ioctl(s->fd, USBDEVFS_REAPURBNDELAY, &aurb); - if (r < 0) { - if (errno == EAGAIN) { - if (urbs > 2) { - /* indicates possible latency issues */ - trace_usb_host_iso_many_urbs(s->bus_num, s->addr, urbs); - } - return; - } - if (errno == ENODEV) { - if (!s->closing) { - trace_usb_host_disconnect(s->bus_num, s->addr); - do_disconnect(s); - } - return; - } - - perror("USBDEVFS_REAPURBNDELAY"); - return; - } - - DPRINTF("husb: async completed. aurb %p status %d alen %d\n", - aurb, aurb->urb.status, aurb->urb.actual_length); - - /* If this is a buffered iso urb mark it as complete and don't do - anything else (it is handled further in usb_host_handle_iso_data) */ - if (aurb->iso_frame_idx == -1) { - int inflight; - int pid = (aurb->urb.endpoint & USB_DIR_IN) ? - USB_TOKEN_IN : USB_TOKEN_OUT; - int ep = aurb->urb.endpoint & 0xf; - if (aurb->urb.status == -EPIPE) { - set_halt(s, pid, ep); - } - aurb->iso_frame_idx = 0; - urbs++; - inflight = change_iso_inflight(s, pid, ep, -1); - if (inflight == 0 && is_iso_started(s, pid, ep)) { - /* can be latency issues, or simply end of stream */ - trace_usb_host_iso_out_of_bufs(s->bus_num, s->addr, ep); - } - continue; - } - - p = aurb->packet; - trace_usb_host_urb_complete(s->bus_num, s->addr, aurb, aurb->urb.status, - aurb->urb.actual_length, aurb->more); - - if (p) { - switch (aurb->urb.status) { - case 0: - p->actual_length += aurb->urb.actual_length; - if (!aurb->more) { - /* Clear previous ASYNC status */ - p->status = USB_RET_SUCCESS; - } - break; - - case -EPIPE: - set_halt(s, p->pid, p->ep->nr); - p->status = USB_RET_STALL; - break; - - case -EOVERFLOW: - p->status = USB_RET_BABBLE; - break; - - default: - p->status = USB_RET_IOERROR; - break; - } - - if (aurb->urb.type == USBDEVFS_URB_TYPE_CONTROL) { - trace_usb_host_req_complete(s->bus_num, s->addr, p, - p->status, aurb->urb.actual_length); - usb_generic_async_ctrl_complete(&s->dev, p); - } else if (!aurb->more) { - trace_usb_host_req_complete(s->bus_num, s->addr, p, - p->status, aurb->urb.actual_length); - usb_packet_complete(&s->dev, p); - } - } - - async_free(aurb); - } -} - -static void usb_host_async_cancel(USBDevice *dev, USBPacket *p) -{ - USBHostDevice *s = DO_UPCAST(USBHostDevice, dev, dev); - AsyncURB *aurb; - - trace_usb_host_req_canceled(s->bus_num, s->addr, p); - - QLIST_FOREACH(aurb, &s->aurbs, next) { - if (p != aurb->packet) { - continue; - } - - trace_usb_host_urb_canceled(s->bus_num, s->addr, aurb); - - /* Mark it as dead (see async_complete above) */ - aurb->packet = NULL; - - int r = ioctl(s->fd, USBDEVFS_DISCARDURB, aurb); - if (r < 0) { - DPRINTF("husb: async. discard urb failed errno %d\n", errno); - } - } -} - -static int usb_host_open_device(int bus, int addr) -{ - const char *usbfs = NULL; - char filename[32]; - struct stat st; - int fd, rc; - - rc = stat("/dev/bus/usb", &st); - if (rc == 0 && S_ISDIR(st.st_mode)) { - /* udev-created device nodes available */ - usbfs = "/dev/bus/usb"; - } else { - /* fallback: usbfs mounted below /proc */ - usbfs = "/proc/bus/usb"; - } - - snprintf(filename, sizeof(filename), "%s/%03d/%03d", - usbfs, bus, addr); - fd = open(filename, O_RDWR | O_NONBLOCK); - if (fd < 0) { - fprintf(stderr, "husb: open %s: %s\n", filename, strerror(errno)); - } - return fd; -} - -static int usb_host_claim_port(USBHostDevice *s) -{ -#ifdef USBDEVFS_CLAIM_PORT - char *h, hub_name[64], line[1024]; - int hub_addr, ret; - - snprintf(hub_name, sizeof(hub_name), "%d-%s", - s->match.bus_num, s->match.port); - - /* try strip off last ".$portnr" to get hub */ - h = strrchr(hub_name, '.'); - if (h != NULL) { - s->hub_port = atoi(h+1); - *h = '\0'; - } else { - /* no dot in there -> it is the root hub */ - snprintf(hub_name, sizeof(hub_name), "usb%d", - s->match.bus_num); - s->hub_port = atoi(s->match.port); - } - - if (!usb_host_read_file(line, sizeof(line), "devnum", - hub_name)) { - return -1; - } - if (sscanf(line, "%d", &hub_addr) != 1) { - return -1; - } - - s->hub_fd = usb_host_open_device(s->match.bus_num, hub_addr); - if (s->hub_fd < 0) { - return -1; - } - - ret = ioctl(s->hub_fd, USBDEVFS_CLAIM_PORT, &s->hub_port); - if (ret < 0) { - close(s->hub_fd); - s->hub_fd = -1; - return -1; - } - - trace_usb_host_claim_port(s->match.bus_num, hub_addr, s->hub_port); - return 0; -#else - return -1; -#endif -} - -static void usb_host_release_port(USBHostDevice *s) -{ - if (s->hub_fd == -1) { - return; - } -#ifdef USBDEVFS_RELEASE_PORT - ioctl(s->hub_fd, USBDEVFS_RELEASE_PORT, &s->hub_port); -#endif - close(s->hub_fd); - s->hub_fd = -1; -} - -static int usb_host_disconnect_ifaces(USBHostDevice *dev, int nb_interfaces) -{ - /* earlier Linux 2.4 do not support that */ -#ifdef USBDEVFS_DISCONNECT - struct usbdevfs_ioctl ctrl; - int ret, interface; - - for (interface = 0; interface < nb_interfaces; interface++) { - ctrl.ioctl_code = USBDEVFS_DISCONNECT; - ctrl.ifno = interface; - ctrl.data = 0; - ret = ioctl(dev->fd, USBDEVFS_IOCTL, &ctrl); - if (ret < 0 && errno != ENODATA) { - perror("USBDEVFS_DISCONNECT"); - return -1; - } - } -#endif - return 0; -} - -static int usb_linux_get_num_interfaces(USBHostDevice *s) -{ - char device_name[64], line[1024]; - int num_interfaces = 0; - - sprintf(device_name, "%d-%s", s->bus_num, s->port); - if (!usb_host_read_file(line, sizeof(line), "bNumInterfaces", - device_name)) { - return -1; - } - if (sscanf(line, "%d", &num_interfaces) != 1) { - return -1; - } - return num_interfaces; -} - -static int usb_host_claim_interfaces(USBHostDevice *dev, int configuration) -{ - const char *op = NULL; - int dev_descr_len, config_descr_len; - int interface, nb_interfaces; - int ret, i; - - for (i = 0; i < USB_MAX_INTERFACES; i++) { - dev->dev.altsetting[i] = 0; - } - - if (configuration == 0) { /* address state - ignore */ - dev->dev.ninterfaces = 0; - dev->dev.configuration = 0; - return 1; - } - - DPRINTF("husb: claiming interfaces. config %d\n", configuration); - - i = 0; - dev_descr_len = dev->descr[0]; - if (dev_descr_len > dev->descr_len) { - fprintf(stderr, "husb: update iface failed. descr too short\n"); - return 0; - } - - i += dev_descr_len; - while (i < dev->descr_len) { - DPRINTF("husb: i is %d, descr_len is %d, dl %d, dt %d\n", - i, dev->descr_len, - dev->descr[i], dev->descr[i+1]); - - if (dev->descr[i+1] != USB_DT_CONFIG) { - i += dev->descr[i]; - continue; - } - config_descr_len = dev->descr[i]; - - DPRINTF("husb: config #%d need %d\n", dev->descr[i + 5], configuration); - - if (configuration == dev->descr[i + 5]) { - configuration = dev->descr[i + 5]; - break; - } - - i += config_descr_len; - } - - if (i >= dev->descr_len) { - fprintf(stderr, - "husb: update iface failed. no matching configuration\n"); - return 0; - } - nb_interfaces = dev->descr[i + 4]; - - if (usb_host_disconnect_ifaces(dev, nb_interfaces) < 0) { - goto fail; - } - - /* XXX: only grab if all interfaces are free */ - for (interface = 0; interface < nb_interfaces; interface++) { - op = "USBDEVFS_CLAIMINTERFACE"; - ret = ioctl(dev->fd, USBDEVFS_CLAIMINTERFACE, &interface); - if (ret < 0) { - goto fail; - } - } - - trace_usb_host_claim_interfaces(dev->bus_num, dev->addr, - nb_interfaces, configuration); - - dev->dev.ninterfaces = nb_interfaces; - dev->dev.configuration = configuration; - return 1; - -fail: - if (errno == ENODEV) { - do_disconnect(dev); - } - perror(op); - return 0; -} - -static int usb_host_release_interfaces(USBHostDevice *s) -{ - int ret, i; - - trace_usb_host_release_interfaces(s->bus_num, s->addr); - - for (i = 0; i < s->dev.ninterfaces; i++) { - ret = ioctl(s->fd, USBDEVFS_RELEASEINTERFACE, &i); - if (ret < 0) { - perror("USBDEVFS_RELEASEINTERFACE"); - return 0; - } - } - return 1; -} - -static void usb_host_handle_reset(USBDevice *dev) -{ - USBHostDevice *s = DO_UPCAST(USBHostDevice, dev, dev); - - trace_usb_host_reset(s->bus_num, s->addr); - - usb_host_do_reset(s); - - usb_host_claim_interfaces(s, 0); - usb_linux_update_endp_table(s); -} - -static void usb_host_handle_destroy(USBDevice *dev) -{ - USBHostDevice *s = (USBHostDevice *)dev; - - usb_host_release_port(s); - usb_host_close(s); - QTAILQ_REMOVE(&hostdevs, s, next); - qemu_remove_exit_notifier(&s->exit); -} - -/* iso data is special, we need to keep enough urbs in flight to make sure - that the controller never runs out of them, otherwise the device will - likely suffer a buffer underrun / overrun. */ -static AsyncURB *usb_host_alloc_iso(USBHostDevice *s, int pid, uint8_t ep) -{ - AsyncURB *aurb; - int i, j, len = usb_ep_get_max_packet_size(&s->dev, pid, ep); - - aurb = g_malloc0(s->iso_urb_count * sizeof(*aurb)); - for (i = 0; i < s->iso_urb_count; i++) { - aurb[i].urb.endpoint = ep; - aurb[i].urb.buffer_length = ISO_FRAME_DESC_PER_URB * len; - aurb[i].urb.buffer = g_malloc(aurb[i].urb.buffer_length); - aurb[i].urb.type = USBDEVFS_URB_TYPE_ISO; - aurb[i].urb.flags = USBDEVFS_URB_ISO_ASAP; - aurb[i].urb.number_of_packets = ISO_FRAME_DESC_PER_URB; - for (j = 0 ; j < ISO_FRAME_DESC_PER_URB; j++) - aurb[i].urb.iso_frame_desc[j].length = len; - if (pid == USB_TOKEN_IN) { - aurb[i].urb.endpoint |= 0x80; - /* Mark as fully consumed (idle) */ - aurb[i].iso_frame_idx = ISO_FRAME_DESC_PER_URB; - } - } - set_iso_urb(s, pid, ep, aurb); - - return aurb; -} - -static void usb_host_stop_n_free_iso(USBHostDevice *s, int pid, uint8_t ep) -{ - AsyncURB *aurb; - int i, ret, killed = 0, free = 1; - - aurb = get_iso_urb(s, pid, ep); - if (!aurb) { - return; - } - - for (i = 0; i < s->iso_urb_count; i++) { - /* in flight? */ - if (aurb[i].iso_frame_idx == -1) { - ret = ioctl(s->fd, USBDEVFS_DISCARDURB, &aurb[i]); - if (ret < 0) { - perror("USBDEVFS_DISCARDURB"); - free = 0; - continue; - } - killed++; - } - } - - /* Make sure any urbs we've killed are reaped before we free them */ - if (killed) { - async_complete(s); - } - - for (i = 0; i < s->iso_urb_count; i++) { - g_free(aurb[i].urb.buffer); - } - - if (free) - g_free(aurb); - else - printf("husb: leaking iso urbs because of discard failure\n"); - set_iso_urb(s, pid, ep, NULL); - set_iso_urb_idx(s, pid, ep, 0); - clear_iso_started(s, pid, ep); -} - -static void urb_status_to_usb_ret(int status, USBPacket *p) -{ - switch (status) { - case -EPIPE: - p->status = USB_RET_STALL; - break; - case -EOVERFLOW: - p->status = USB_RET_BABBLE; - break; - default: - p->status = USB_RET_IOERROR; - } -} - -static void usb_host_handle_iso_data(USBHostDevice *s, USBPacket *p, int in) -{ - AsyncURB *aurb; - int i, j, max_packet_size, offset, len; - uint8_t *buf; - - max_packet_size = p->ep->max_packet_size; - if (max_packet_size == 0) { - p->status = USB_RET_NAK; - return; - } - - aurb = get_iso_urb(s, p->pid, p->ep->nr); - if (!aurb) { - aurb = usb_host_alloc_iso(s, p->pid, p->ep->nr); - } - - i = get_iso_urb_idx(s, p->pid, p->ep->nr); - j = aurb[i].iso_frame_idx; - if (j >= 0 && j < ISO_FRAME_DESC_PER_URB) { - if (in) { - /* Check urb status */ - if (aurb[i].urb.status) { - urb_status_to_usb_ret(aurb[i].urb.status, p); - /* Move to the next urb */ - aurb[i].iso_frame_idx = ISO_FRAME_DESC_PER_URB - 1; - /* Check frame status */ - } else if (aurb[i].urb.iso_frame_desc[j].status) { - urb_status_to_usb_ret(aurb[i].urb.iso_frame_desc[j].status, p); - /* Check the frame fits */ - } else if (aurb[i].urb.iso_frame_desc[j].actual_length - > p->iov.size) { - printf("husb: received iso data is larger then packet\n"); - p->status = USB_RET_BABBLE; - /* All good copy data over */ - } else { - len = aurb[i].urb.iso_frame_desc[j].actual_length; - buf = aurb[i].urb.buffer + - j * aurb[i].urb.iso_frame_desc[0].length; - usb_packet_copy(p, buf, len); - } - } else { - len = p->iov.size; - offset = (j == 0) ? 0 : get_iso_buffer_used(s, p->pid, p->ep->nr); - - /* Check the frame fits */ - if (len > max_packet_size) { - printf("husb: send iso data is larger then max packet size\n"); - p->status = USB_RET_NAK; - return; - } - - /* All good copy data over */ - usb_packet_copy(p, aurb[i].urb.buffer + offset, len); - aurb[i].urb.iso_frame_desc[j].length = len; - offset += len; - set_iso_buffer_used(s, p->pid, p->ep->nr, offset); - - /* Start the stream once we have buffered enough data */ - if (!is_iso_started(s, p->pid, p->ep->nr) && i == 1 && j == 8) { - set_iso_started(s, p->pid, p->ep->nr); - } - } - aurb[i].iso_frame_idx++; - if (aurb[i].iso_frame_idx == ISO_FRAME_DESC_PER_URB) { - i = (i + 1) % s->iso_urb_count; - set_iso_urb_idx(s, p->pid, p->ep->nr, i); - } - } else { - if (in) { - set_iso_started(s, p->pid, p->ep->nr); - } else { - DPRINTF("hubs: iso out error no free buffer, dropping packet\n"); - } - } - - if (is_iso_started(s, p->pid, p->ep->nr)) { - /* (Re)-submit all fully consumed / filled urbs */ - for (i = 0; i < s->iso_urb_count; i++) { - if (aurb[i].iso_frame_idx == ISO_FRAME_DESC_PER_URB) { - if (ioctl(s->fd, USBDEVFS_SUBMITURB, &aurb[i]) < 0) { - perror("USBDEVFS_SUBMITURB"); - if (!in || p->status == USB_RET_SUCCESS) { - switch(errno) { - case ETIMEDOUT: - p->status = USB_RET_NAK; - break; - case EPIPE: - default: - p->status = USB_RET_STALL; - } - } - break; - } - aurb[i].iso_frame_idx = -1; - change_iso_inflight(s, p->pid, p->ep->nr, 1); - } - } - } -} - -static void usb_host_handle_data(USBDevice *dev, USBPacket *p) -{ - USBHostDevice *s = DO_UPCAST(USBHostDevice, dev, dev); - struct usbdevfs_urb *urb; - AsyncURB *aurb; - int ret, rem, prem, v; - uint8_t *pbuf; - uint8_t ep; - - trace_usb_host_req_data(s->bus_num, s->addr, p, - p->pid == USB_TOKEN_IN, - p->ep->nr, p->iov.size); - - if (!is_valid(s, p->pid, p->ep->nr)) { - p->status = USB_RET_NAK; - trace_usb_host_req_complete(s->bus_num, s->addr, p, - p->status, p->actual_length); - return; - } - - if (p->pid == USB_TOKEN_IN) { - ep = p->ep->nr | 0x80; - } else { - ep = p->ep->nr; - } - - if (is_halted(s, p->pid, p->ep->nr)) { - unsigned int arg = ep; - ret = ioctl(s->fd, USBDEVFS_CLEAR_HALT, &arg); - if (ret < 0) { - perror("USBDEVFS_CLEAR_HALT"); - p->status = USB_RET_NAK; - trace_usb_host_req_complete(s->bus_num, s->addr, p, - p->status, p->actual_length); - return; - } - clear_halt(s, p->pid, p->ep->nr); - } - - if (is_isoc(s, p->pid, p->ep->nr)) { - usb_host_handle_iso_data(s, p, p->pid == USB_TOKEN_IN); - return; - } - - v = 0; - prem = 0; - pbuf = NULL; - rem = p->iov.size; - do { - if (prem == 0 && rem > 0) { - assert(v < p->iov.niov); - prem = p->iov.iov[v].iov_len; - pbuf = p->iov.iov[v].iov_base; - assert(prem <= rem); - v++; - } - aurb = async_alloc(s); - aurb->packet = p; - - urb = &aurb->urb; - urb->endpoint = ep; - urb->type = usb_host_usbfs_type(s, p); - urb->usercontext = s; - urb->buffer = pbuf; - urb->buffer_length = prem; - - if (urb->buffer_length > MAX_USBFS_BUFFER_SIZE) { - urb->buffer_length = MAX_USBFS_BUFFER_SIZE; - } - pbuf += urb->buffer_length; - prem -= urb->buffer_length; - rem -= urb->buffer_length; - if (rem) { - aurb->more = 1; - } - - trace_usb_host_urb_submit(s->bus_num, s->addr, aurb, - urb->buffer_length, aurb->more); - ret = ioctl(s->fd, USBDEVFS_SUBMITURB, urb); - - DPRINTF("husb: data submit: ep 0x%x, len %u, more %d, packet %p, aurb %p\n", - urb->endpoint, urb->buffer_length, aurb->more, p, aurb); - - if (ret < 0) { - perror("USBDEVFS_SUBMITURB"); - async_free(aurb); - - switch(errno) { - case ETIMEDOUT: - p->status = USB_RET_NAK; - trace_usb_host_req_complete(s->bus_num, s->addr, p, - p->status, p->actual_length); - break; - case EPIPE: - default: - p->status = USB_RET_STALL; - trace_usb_host_req_complete(s->bus_num, s->addr, p, - p->status, p->actual_length); - } - return; - } - } while (rem > 0); - - p->status = USB_RET_ASYNC; -} - -static int ctrl_error(void) -{ - if (errno == ETIMEDOUT) { - return USB_RET_NAK; - } else { - return USB_RET_STALL; - } -} - -static void usb_host_set_address(USBHostDevice *s, int addr) -{ - trace_usb_host_set_address(s->bus_num, s->addr, addr); - s->dev.addr = addr; -} - -static void usb_host_set_config(USBHostDevice *s, int config, USBPacket *p) -{ - int ret, first = 1; - - trace_usb_host_set_config(s->bus_num, s->addr, config); - - usb_host_release_interfaces(s); - -again: - ret = ioctl(s->fd, USBDEVFS_SETCONFIGURATION, &config); - - DPRINTF("husb: ctrl set config %d ret %d errno %d\n", config, ret, errno); - - if (ret < 0 && errno == EBUSY && first) { - /* happens if usb device is in use by host drivers */ - int count = usb_linux_get_num_interfaces(s); - if (count > 0) { - DPRINTF("husb: busy -> disconnecting %d interfaces\n", count); - usb_host_disconnect_ifaces(s, count); - first = 0; - goto again; - } - } - - if (ret < 0) { - p->status = ctrl_error(); - return; - } - usb_host_claim_interfaces(s, config); - usb_linux_update_endp_table(s); -} - -static void usb_host_set_interface(USBHostDevice *s, int iface, int alt, - USBPacket *p) -{ - struct usbdevfs_setinterface si; - int i, ret; - - trace_usb_host_set_interface(s->bus_num, s->addr, iface, alt); - - for (i = 1; i <= USB_MAX_ENDPOINTS; i++) { - if (is_isoc(s, USB_TOKEN_IN, i)) { - usb_host_stop_n_free_iso(s, USB_TOKEN_IN, i); - } - if (is_isoc(s, USB_TOKEN_OUT, i)) { - usb_host_stop_n_free_iso(s, USB_TOKEN_OUT, i); - } - } - - if (iface >= USB_MAX_INTERFACES) { - p->status = USB_RET_STALL; - return; - } - - si.interface = iface; - si.altsetting = alt; - ret = ioctl(s->fd, USBDEVFS_SETINTERFACE, &si); - - DPRINTF("husb: ctrl set iface %d altset %d ret %d errno %d\n", - iface, alt, ret, errno); - - if (ret < 0) { - p->status = ctrl_error(); - return; - } - - s->dev.altsetting[iface] = alt; - usb_linux_update_endp_table(s); -} - -static void usb_host_handle_control(USBDevice *dev, USBPacket *p, - int request, int value, int index, int length, uint8_t *data) -{ - USBHostDevice *s = DO_UPCAST(USBHostDevice, dev, dev); - struct usbdevfs_urb *urb; - AsyncURB *aurb; - int ret; - - /* - * Process certain standard device requests. - * These are infrequent and are processed synchronously. - */ - - /* Note request is (bRequestType << 8) | bRequest */ - trace_usb_host_req_control(s->bus_num, s->addr, p, request, value, index); - - switch (request) { - case DeviceOutRequest | USB_REQ_SET_ADDRESS: - usb_host_set_address(s, value); - trace_usb_host_req_emulated(s->bus_num, s->addr, p, p->status); - return; - - case DeviceOutRequest | USB_REQ_SET_CONFIGURATION: - usb_host_set_config(s, value & 0xff, p); - trace_usb_host_req_emulated(s->bus_num, s->addr, p, p->status); - return; - - case InterfaceOutRequest | USB_REQ_SET_INTERFACE: - usb_host_set_interface(s, index, value, p); - trace_usb_host_req_emulated(s->bus_num, s->addr, p, p->status); - return; - - case EndpointOutRequest | USB_REQ_CLEAR_FEATURE: - if (value == 0) { /* clear halt */ - int pid = (index & USB_DIR_IN) ? USB_TOKEN_IN : USB_TOKEN_OUT; - ioctl(s->fd, USBDEVFS_CLEAR_HALT, &index); - clear_halt(s, pid, index & 0x0f); - trace_usb_host_req_emulated(s->bus_num, s->addr, p, 0); - return; - } - } - - /* The rest are asynchronous */ - if (length > sizeof(dev->data_buf)) { - fprintf(stderr, "husb: ctrl buffer too small (%d > %zu)\n", - length, sizeof(dev->data_buf)); - p->status = USB_RET_STALL; - return; - } - - aurb = async_alloc(s); - aurb->packet = p; - - /* - * Setup ctrl transfer. - * - * s->ctrl is laid out such that data buffer immediately follows - * 'req' struct which is exactly what usbdevfs expects. - */ - urb = &aurb->urb; - - urb->type = USBDEVFS_URB_TYPE_CONTROL; - urb->endpoint = p->ep->nr; - - urb->buffer = &dev->setup_buf; - urb->buffer_length = length + 8; - - urb->usercontext = s; - - trace_usb_host_urb_submit(s->bus_num, s->addr, aurb, - urb->buffer_length, aurb->more); - ret = ioctl(s->fd, USBDEVFS_SUBMITURB, urb); - - DPRINTF("husb: submit ctrl. len %u aurb %p\n", urb->buffer_length, aurb); - - if (ret < 0) { - DPRINTF("husb: submit failed. errno %d\n", errno); - async_free(aurb); - - switch(errno) { - case ETIMEDOUT: - p->status = USB_RET_NAK; - break; - case EPIPE: - default: - p->status = USB_RET_STALL; - break; - } - return; - } - - p->status = USB_RET_ASYNC; -} - -static void usb_linux_update_endp_table(USBHostDevice *s) -{ - static const char *tname[] = { - [USB_ENDPOINT_XFER_CONTROL] = "control", - [USB_ENDPOINT_XFER_ISOC] = "isoc", - [USB_ENDPOINT_XFER_BULK] = "bulk", - [USB_ENDPOINT_XFER_INT] = "int", - }; - uint8_t devep, type; - uint16_t mps, v, p; - int ep, pid; - unsigned int i, configuration = -1, interface = -1, altsetting = -1; - struct endp_data *epd; - USBDescriptor *d; - bool active = false; - - usb_ep_reset(&s->dev); - - for (i = 0;; i += d->bLength) { - if (i+2 >= s->descr_len) { - break; - } - d = (void *)(s->descr + i); - if (d->bLength < 2) { - trace_usb_host_parse_error(s->bus_num, s->addr, - "descriptor too short"); - return; - } - if (i + d->bLength > s->descr_len) { - trace_usb_host_parse_error(s->bus_num, s->addr, - "descriptor too long"); - return; - } - switch (d->bDescriptorType) { - case 0: - trace_usb_host_parse_error(s->bus_num, s->addr, - "invalid descriptor type"); - return; - case USB_DT_DEVICE: - if (d->bLength < 0x12) { - trace_usb_host_parse_error(s->bus_num, s->addr, - "device descriptor too short"); - return; - } - v = (d->u.device.idVendor_hi << 8) | d->u.device.idVendor_lo; - p = (d->u.device.idProduct_hi << 8) | d->u.device.idProduct_lo; - trace_usb_host_parse_device(s->bus_num, s->addr, v, p); - break; - case USB_DT_CONFIG: - if (d->bLength < 0x09) { - trace_usb_host_parse_error(s->bus_num, s->addr, - "config descriptor too short"); - return; - } - configuration = d->u.config.bConfigurationValue; - active = (configuration == s->dev.configuration); - trace_usb_host_parse_config(s->bus_num, s->addr, - configuration, active); - break; - case USB_DT_INTERFACE: - if (d->bLength < 0x09) { - trace_usb_host_parse_error(s->bus_num, s->addr, - "interface descriptor too short"); - return; - } - interface = d->u.interface.bInterfaceNumber; - altsetting = d->u.interface.bAlternateSetting; - active = (configuration == s->dev.configuration) && - (altsetting == s->dev.altsetting[interface]); - trace_usb_host_parse_interface(s->bus_num, s->addr, - interface, altsetting, active); - break; - case USB_DT_ENDPOINT: - if (d->bLength < 0x07) { - trace_usb_host_parse_error(s->bus_num, s->addr, - "endpoint descriptor too short"); - return; - } - devep = d->u.endpoint.bEndpointAddress; - pid = (devep & USB_DIR_IN) ? USB_TOKEN_IN : USB_TOKEN_OUT; - ep = devep & 0xf; - if (ep == 0) { - trace_usb_host_parse_error(s->bus_num, s->addr, - "invalid endpoint address"); - return; - } - - type = d->u.endpoint.bmAttributes & 0x3; - mps = d->u.endpoint.wMaxPacketSize_lo | - (d->u.endpoint.wMaxPacketSize_hi << 8); - trace_usb_host_parse_endpoint(s->bus_num, s->addr, ep, - (devep & USB_DIR_IN) ? "in" : "out", - tname[type], active); - - if (active) { - usb_ep_set_max_packet_size(&s->dev, pid, ep, mps); - assert(usb_ep_get_type(&s->dev, pid, ep) == - USB_ENDPOINT_XFER_INVALID); - usb_ep_set_type(&s->dev, pid, ep, type); - usb_ep_set_ifnum(&s->dev, pid, ep, interface); - if ((s->options & (1 << USB_HOST_OPT_PIPELINE)) && - (type == USB_ENDPOINT_XFER_BULK) && - (pid == USB_TOKEN_OUT)) { - usb_ep_set_pipeline(&s->dev, pid, ep, true); - } - - epd = get_endp(s, pid, ep); - epd->halted = 0; - } - - break; - default: - trace_usb_host_parse_unknown(s->bus_num, s->addr, - d->bLength, d->bDescriptorType); - break; - } - } -} - -/* - * Check if we can safely redirect a usb2 device to a usb1 virtual controller, - * this function assumes this is safe, if: - * 1) There are no isoc endpoints - * 2) There are no interrupt endpoints with a max_packet_size > 64 - * Note bulk endpoints with a max_packet_size > 64 in theory also are not - * usb1 compatible, but in practice this seems to work fine. - */ -static int usb_linux_full_speed_compat(USBHostDevice *dev) -{ - int i, packet_size; - - /* - * usb_linux_update_endp_table only registers info about ep in the current - * interface altsettings, so we need to parse the descriptors again. - */ - for (i = 0; (i + 5) < dev->descr_len; i += dev->descr[i]) { - if (dev->descr[i + 1] == USB_DT_ENDPOINT) { - switch (dev->descr[i + 3] & 0x3) { - case 0x00: /* CONTROL */ - break; - case 0x01: /* ISO */ - return 0; - case 0x02: /* BULK */ - break; - case 0x03: /* INTERRUPT */ - packet_size = dev->descr[i + 4] + (dev->descr[i + 5] << 8); - if (packet_size > 64) - return 0; - break; - } - } - } - return 1; -} - -static int usb_host_open(USBHostDevice *dev, int bus_num, - int addr, const char *port, - const char *prod_name, int speed) -{ - int fd = -1, ret; - - trace_usb_host_open_started(bus_num, addr); - - if (dev->fd != -1) { - goto fail; - } - - fd = usb_host_open_device(bus_num, addr); - if (fd < 0) { - goto fail; - } - DPRINTF("husb: opened %s\n", buf); - - dev->bus_num = bus_num; - dev->addr = addr; - pstrcpy(dev->port, sizeof(dev->port), port); - dev->fd = fd; - - /* read the device description */ - dev->descr_len = read(fd, dev->descr, sizeof(dev->descr)); - if (dev->descr_len <= 0) { - perror("husb: reading device data failed"); - goto fail; - } - -#ifdef DEBUG - { - int x; - printf("=== begin dumping device descriptor data ===\n"); - for (x = 0; x < dev->descr_len; x++) { - printf("%02x ", dev->descr[x]); - } - printf("\n=== end dumping device descriptor data ===\n"); - } -#endif - - - /* start unconfigured -- we'll wait for the guest to set a configuration */ - if (!usb_host_claim_interfaces(dev, 0)) { - goto fail; - } - - usb_ep_init(&dev->dev); - usb_linux_update_endp_table(dev); - - if (speed == -1) { - struct usbdevfs_connectinfo ci; - - ret = ioctl(fd, USBDEVFS_CONNECTINFO, &ci); - if (ret < 0) { - perror("usb_host_device_open: USBDEVFS_CONNECTINFO"); - goto fail; - } - - if (ci.slow) { - speed = USB_SPEED_LOW; - } else { - speed = USB_SPEED_HIGH; - } - } - dev->dev.speed = speed; - dev->dev.speedmask = (1 << speed); - if (dev->dev.speed == USB_SPEED_HIGH && usb_linux_full_speed_compat(dev)) { - dev->dev.speedmask |= USB_SPEED_MASK_FULL; - } - - trace_usb_host_open_success(bus_num, addr); - - if (!prod_name || prod_name[0] == '\0') { - snprintf(dev->dev.product_desc, sizeof(dev->dev.product_desc), - "host:%d.%d", bus_num, addr); - } else { - pstrcpy(dev->dev.product_desc, sizeof(dev->dev.product_desc), - prod_name); - } - - ret = usb_device_attach(&dev->dev); - if (ret) { - goto fail; - } - - /* USB devio uses 'write' flag to check for async completions */ - qemu_set_fd_handler(dev->fd, NULL, async_complete, dev); - - return 0; - -fail: - trace_usb_host_open_failure(bus_num, addr); - if (dev->fd != -1) { - close(dev->fd); - dev->fd = -1; - } - return -1; -} - -static int usb_host_close(USBHostDevice *dev) -{ - int i; - - if (dev->fd == -1) { - return -1; - } - - trace_usb_host_close(dev->bus_num, dev->addr); - - qemu_set_fd_handler(dev->fd, NULL, NULL, NULL); - dev->closing = 1; - for (i = 1; i <= USB_MAX_ENDPOINTS; i++) { - if (is_isoc(dev, USB_TOKEN_IN, i)) { - usb_host_stop_n_free_iso(dev, USB_TOKEN_IN, i); - } - if (is_isoc(dev, USB_TOKEN_OUT, i)) { - usb_host_stop_n_free_iso(dev, USB_TOKEN_OUT, i); - } - } - async_complete(dev); - dev->closing = 0; - if (dev->dev.attached) { - usb_device_detach(&dev->dev); - } - usb_host_do_reset(dev); - close(dev->fd); - dev->fd = -1; - return 0; -} - -static void usb_host_exit_notifier(struct Notifier *n, void *data) -{ - USBHostDevice *s = container_of(n, USBHostDevice, exit); - - usb_host_release_port(s); - if (s->fd != -1) { - usb_host_do_reset(s); - } -} - -/* - * This is *NOT* about restoring state. We have absolutely no idea - * what state the host device is in at the moment and whenever it is - * still present in the first place. Attemping to contine where we - * left off is impossible. - * - * What we are going to to to here is emulate a surprise removal of - * the usb device passed through, then kick host scan so the device - * will get re-attached (and re-initialized by the guest) in case it - * is still present. - * - * As the device removal will change the state of other devices (usb - * host controller, most likely interrupt controller too) we have to - * wait with it until *all* vmstate is loaded. Thus post_load just - * kicks a bottom half which then does the actual work. - */ -static void usb_host_post_load_bh(void *opaque) -{ - USBHostDevice *dev = opaque; - - if (dev->fd != -1) { - usb_host_close(dev); - } - if (dev->dev.attached) { - usb_device_detach(&dev->dev); - } - usb_host_auto_check(NULL); -} - -static int usb_host_post_load(void *opaque, int version_id) -{ - USBHostDevice *dev = opaque; - - qemu_bh_schedule(dev->bh); - return 0; -} - -static int usb_host_initfn(USBDevice *dev) -{ - USBHostDevice *s = DO_UPCAST(USBHostDevice, dev, dev); - - dev->flags |= (1 << USB_DEV_FLAG_IS_HOST); - dev->auto_attach = 0; - s->fd = -1; - s->hub_fd = -1; - - QTAILQ_INSERT_TAIL(&hostdevs, s, next); - s->exit.notify = usb_host_exit_notifier; - qemu_add_exit_notifier(&s->exit); - s->bh = qemu_bh_new(usb_host_post_load_bh, s); - usb_host_auto_check(NULL); - - if (s->match.bus_num != 0 && s->match.port != NULL) { - usb_host_claim_port(s); - } - add_boot_device_path(s->bootindex, &dev->qdev, NULL); - return 0; -} - -static const VMStateDescription vmstate_usb_host = { - .name = DEVNAME, - .version_id = 1, - .minimum_version_id = 1, - .post_load = usb_host_post_load, - .fields = (VMStateField[]) { - VMSTATE_USB_DEVICE(dev, USBHostDevice), - VMSTATE_END_OF_LIST() - } -}; - -static Property usb_host_dev_properties[] = { - DEFINE_PROP_UINT32("hostbus", USBHostDevice, match.bus_num, 0), - DEFINE_PROP_UINT32("hostaddr", USBHostDevice, match.addr, 0), - DEFINE_PROP_STRING("hostport", USBHostDevice, match.port), - DEFINE_PROP_HEX32("vendorid", USBHostDevice, match.vendor_id, 0), - DEFINE_PROP_HEX32("productid", USBHostDevice, match.product_id, 0), - DEFINE_PROP_UINT32("isobufs", USBHostDevice, iso_urb_count, 4), - DEFINE_PROP_INT32("bootindex", USBHostDevice, bootindex, -1), - DEFINE_PROP_BIT("pipeline", USBHostDevice, options, - USB_HOST_OPT_PIPELINE, true), - DEFINE_PROP_END_OF_LIST(), -}; - -static void usb_host_class_initfn(ObjectClass *klass, void *data) -{ - DeviceClass *dc = DEVICE_CLASS(klass); - USBDeviceClass *uc = USB_DEVICE_CLASS(klass); - - uc->init = usb_host_initfn; - uc->product_desc = "USB Host Device"; - uc->cancel_packet = usb_host_async_cancel; - uc->handle_data = usb_host_handle_data; - uc->handle_control = usb_host_handle_control; - uc->handle_reset = usb_host_handle_reset; - uc->handle_destroy = usb_host_handle_destroy; - dc->vmsd = &vmstate_usb_host; - dc->props = usb_host_dev_properties; - set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories); -} - -static const TypeInfo usb_host_dev_info = { - .name = DEVNAME, - .parent = TYPE_USB_DEVICE, - .instance_size = sizeof(USBHostDevice), - .class_init = usb_host_class_initfn, -}; - -static void usb_host_register_types(void) -{ - type_register_static(&usb_host_dev_info); -} - -type_init(usb_host_register_types) - -/* - * Read sys file-system device file - * - * @line address of buffer to put file contents in - * @line_size size of line - * @device_file path to device file (printf format string) - * @device_name device being opened (inserted into device_file) - * - * @return 0 failed, 1 succeeded ('line' contains data) - */ -static int usb_host_read_file(char *line, size_t line_size, - const char *device_file, const char *device_name) -{ - FILE *f; - int ret = 0; - char filename[PATH_MAX]; - - snprintf(filename, PATH_MAX, "/sys/bus/usb/devices/%s/%s", device_name, - device_file); - f = fopen(filename, "r"); - if (f) { - ret = fgets(line, line_size, f) != NULL; - fclose(f); - } - - return ret; -} - -/* - * Use /sys/bus/usb/devices/ directory to determine host's USB - * devices. - * - * This code is based on Robert Schiele's original patches posted to - * the Novell bug-tracker https://bugzilla.novell.com/show_bug.cgi?id=241950 - */ -static int usb_host_scan(void *opaque, USBScanFunc *func) -{ - DIR *dir = NULL; - char line[1024]; - int bus_num, addr, speed, class_id, product_id, vendor_id; - int ret = 0; - char port[MAX_PORTLEN]; - char product_name[512]; - struct dirent *de; - - dir = opendir("/sys/bus/usb/devices"); - if (!dir) { - perror("husb: opendir /sys/bus/usb/devices"); - fprintf(stderr, "husb: please make sure sysfs is mounted at /sys\n"); - goto the_end; - } - - while ((de = readdir(dir))) { - if (de->d_name[0] != '.' && !strchr(de->d_name, ':')) { - if (sscanf(de->d_name, "%d-%7[0-9.]", &bus_num, port) < 2) { - continue; - } - - if (!usb_host_read_file(line, sizeof(line), "devnum", de->d_name)) { - goto the_end; - } - if (sscanf(line, "%d", &addr) != 1) { - goto the_end; - } - if (!usb_host_read_file(line, sizeof(line), "bDeviceClass", - de->d_name)) { - goto the_end; - } - if (sscanf(line, "%x", &class_id) != 1) { - goto the_end; - } - - if (!usb_host_read_file(line, sizeof(line), "idVendor", - de->d_name)) { - goto the_end; - } - if (sscanf(line, "%x", &vendor_id) != 1) { - goto the_end; - } - if (!usb_host_read_file(line, sizeof(line), "idProduct", - de->d_name)) { - goto the_end; - } - if (sscanf(line, "%x", &product_id) != 1) { - goto the_end; - } - if (!usb_host_read_file(line, sizeof(line), "product", - de->d_name)) { - *product_name = 0; - } else { - if (strlen(line) > 0) { - line[strlen(line) - 1] = '\0'; - } - pstrcpy(product_name, sizeof(product_name), line); - } - - if (!usb_host_read_file(line, sizeof(line), "speed", de->d_name)) { - goto the_end; - } - if (!strcmp(line, "5000\n")) { - speed = USB_SPEED_SUPER; - } else if (!strcmp(line, "480\n")) { - speed = USB_SPEED_HIGH; - } else if (!strcmp(line, "1.5\n")) { - speed = USB_SPEED_LOW; - } else { - speed = USB_SPEED_FULL; - } - - ret = func(opaque, bus_num, addr, port, class_id, vendor_id, - product_id, product_name, speed); - if (ret) { - goto the_end; - } - } - } - the_end: - if (dir) { - closedir(dir); - } - return ret; -} - -static QEMUTimer *usb_auto_timer; -static VMChangeStateEntry *usb_vmstate; - -static int usb_host_auto_scan(void *opaque, int bus_num, - int addr, const char *port, - int class_id, int vendor_id, int product_id, - const char *product_name, int speed) -{ - struct USBAutoFilter *f; - struct USBHostDevice *s; - - /* Ignore hubs */ - if (class_id == 9) - return 0; - - QTAILQ_FOREACH(s, &hostdevs, next) { - f = &s->match; - - if (f->bus_num > 0 && f->bus_num != bus_num) { - continue; - } - if (f->addr > 0 && f->addr != addr) { - continue; - } - if (f->port != NULL && strcmp(f->port, port) != 0) { - continue; - } - - if (f->vendor_id > 0 && f->vendor_id != vendor_id) { - continue; - } - - if (f->product_id > 0 && f->product_id != product_id) { - continue; - } - /* We got a match */ - s->seen++; - if (s->errcount >= 3) { - return 0; - } - - /* Already attached ? */ - if (s->fd != -1) { - return 0; - } - DPRINTF("husb: auto open: bus_num %d addr %d\n", bus_num, addr); - - if (usb_host_open(s, bus_num, addr, port, product_name, speed) < 0) { - s->errcount++; - } - break; - } - - return 0; -} - -static void usb_host_vm_state(void *unused, int running, RunState state) -{ - if (running) { - usb_host_auto_check(unused); - } -} - -static void usb_host_auto_check(void *unused) -{ - struct USBHostDevice *s; - int unconnected = 0; - - if (runstate_is_running()) { - usb_host_scan(NULL, usb_host_auto_scan); - - QTAILQ_FOREACH(s, &hostdevs, next) { - if (s->fd == -1) { - unconnected++; - } - if (s->seen == 0) { - s->errcount = 0; - } - s->seen = 0; - } - - if (unconnected == 0) { - /* nothing to watch */ - if (usb_auto_timer) { - timer_del(usb_auto_timer); - trace_usb_host_auto_scan_disabled(); - } - return; - } - } - - if (!usb_vmstate) { - usb_vmstate = qemu_add_vm_change_state_handler(usb_host_vm_state, NULL); - } - if (!usb_auto_timer) { - usb_auto_timer = timer_new_ms(QEMU_CLOCK_REALTIME, usb_host_auto_check, NULL); - if (!usb_auto_timer) { - return; - } - trace_usb_host_auto_scan_enabled(); - } - timer_mod(usb_auto_timer, qemu_clock_get_ms(QEMU_CLOCK_REALTIME) + 2000); -} - -#ifndef CONFIG_USB_LIBUSB - -/**********************/ -/* USB host device info */ - -struct usb_class_info { - int class; - const char *class_name; -}; - -static const struct usb_class_info usb_class_info[] = { - { USB_CLASS_AUDIO, "Audio"}, - { USB_CLASS_COMM, "Communication"}, - { USB_CLASS_HID, "HID"}, - { USB_CLASS_HUB, "Hub" }, - { USB_CLASS_PHYSICAL, "Physical" }, - { USB_CLASS_PRINTER, "Printer" }, - { USB_CLASS_MASS_STORAGE, "Storage" }, - { USB_CLASS_CDC_DATA, "Data" }, - { USB_CLASS_APP_SPEC, "Application Specific" }, - { USB_CLASS_VENDOR_SPEC, "Vendor Specific" }, - { USB_CLASS_STILL_IMAGE, "Still Image" }, - { USB_CLASS_CSCID, "Smart Card" }, - { USB_CLASS_CONTENT_SEC, "Content Security" }, - { -1, NULL } -}; - -static const char *usb_class_str(uint8_t class) -{ - const struct usb_class_info *p; - for(p = usb_class_info; p->class != -1; p++) { - if (p->class == class) { - break; - } - } - return p->class_name; -} - -static void usb_info_device(Monitor *mon, int bus_num, - int addr, const char *port, - int class_id, int vendor_id, int product_id, - const char *product_name, - int speed) -{ - const char *class_str, *speed_str; - - switch(speed) { - case USB_SPEED_LOW: - speed_str = "1.5"; - break; - case USB_SPEED_FULL: - speed_str = "12"; - break; - case USB_SPEED_HIGH: - speed_str = "480"; - break; - case USB_SPEED_SUPER: - speed_str = "5000"; - break; - default: - speed_str = "?"; - break; - } - - monitor_printf(mon, " Bus %d, Addr %d, Port %s, Speed %s Mb/s\n", - bus_num, addr, port, speed_str); - class_str = usb_class_str(class_id); - if (class_str) { - monitor_printf(mon, " %s:", class_str); - } else { - monitor_printf(mon, " Class %02x:", class_id); - } - monitor_printf(mon, " USB device %04x:%04x", vendor_id, product_id); - if (product_name[0] != '\0') { - monitor_printf(mon, ", %s", product_name); - } - monitor_printf(mon, "\n"); -} - -static int usb_host_info_device(void *opaque, int bus_num, int addr, - const char *path, int class_id, - int vendor_id, int product_id, - const char *product_name, - int speed) -{ - Monitor *mon = opaque; - - usb_info_device(mon, bus_num, addr, path, class_id, vendor_id, product_id, - product_name, speed); - return 0; -} - -static void dec2str(int val, char *str, size_t size) -{ - if (val == 0) { - snprintf(str, size, "*"); - } else { - snprintf(str, size, "%d", val); - } -} - -static void hex2str(int val, char *str, size_t size) -{ - if (val == 0) { - snprintf(str, size, "*"); - } else { - snprintf(str, size, "%04x", val); - } -} - -void usb_host_info(Monitor *mon, const QDict *qdict) -{ - struct USBAutoFilter *f; - struct USBHostDevice *s; - - usb_host_scan(mon, usb_host_info_device); - - if (QTAILQ_EMPTY(&hostdevs)) { - return; - } - - monitor_printf(mon, " Auto filters:\n"); - QTAILQ_FOREACH(s, &hostdevs, next) { - char bus[10], addr[10], vid[10], pid[10]; - f = &s->match; - dec2str(f->bus_num, bus, sizeof(bus)); - dec2str(f->addr, addr, sizeof(addr)); - hex2str(f->vendor_id, vid, sizeof(vid)); - hex2str(f->product_id, pid, sizeof(pid)); - monitor_printf(mon, " Bus %s, Addr %s, Port %s, ID %s:%s\n", - bus, addr, f->port ? f->port : "*", vid, pid); - } -} - -#endif |