diff options
Diffstat (limited to 'hw/vfio/common.c')
| -rw-r--r-- | hw/vfio/common.c | 959 |
1 files changed, 959 insertions, 0 deletions
diff --git a/hw/vfio/common.c b/hw/vfio/common.c new file mode 100644 index 0000000000..4f15c86b80 --- /dev/null +++ b/hw/vfio/common.c @@ -0,0 +1,959 @@ +/* + * generic functions used by VFIO devices + * + * Copyright Red Hat, Inc. 2012 + * + * Authors: + * Alex Williamson <alex.williamson@redhat.com> + * + * This work is licensed under the terms of the GNU GPL, version 2. See + * the COPYING file in the top-level directory. + * + * Based on qemu-kvm device-assignment: + * Adapted for KVM by Qumranet. + * Copyright (c) 2007, Neocleus, Alex Novik (alex@neocleus.com) + * Copyright (c) 2007, Neocleus, Guy Zana (guy@neocleus.com) + * Copyright (C) 2008, Qumranet, Amit Shah (amit.shah@qumranet.com) + * Copyright (C) 2008, Red Hat, Amit Shah (amit.shah@redhat.com) + * Copyright (C) 2008, IBM, Muli Ben-Yehuda (muli@il.ibm.com) + */ + +#include <sys/ioctl.h> +#include <sys/mman.h> +#include <linux/vfio.h> + +#include "hw/vfio/vfio-common.h" +#include "hw/vfio/vfio.h" +#include "exec/address-spaces.h" +#include "exec/memory.h" +#include "hw/hw.h" +#include "qemu/error-report.h" +#include "sysemu/kvm.h" +#include "trace.h" + +struct vfio_group_head vfio_group_list = + QLIST_HEAD_INITIALIZER(vfio_address_spaces); +struct vfio_as_head vfio_address_spaces = + QLIST_HEAD_INITIALIZER(vfio_address_spaces); + +#ifdef CONFIG_KVM +/* + * We have a single VFIO pseudo device per KVM VM. Once created it lives + * for the life of the VM. Closing the file descriptor only drops our + * reference to it and the device's reference to kvm. Therefore once + * initialized, this file descriptor is only released on QEMU exit and + * we'll re-use it should another vfio device be attached before then. + */ +static int vfio_kvm_device_fd = -1; +#endif + +/* + * Common VFIO interrupt disable + */ +void vfio_disable_irqindex(VFIODevice *vbasedev, int index) +{ + struct vfio_irq_set irq_set = { + .argsz = sizeof(irq_set), + .flags = VFIO_IRQ_SET_DATA_NONE | VFIO_IRQ_SET_ACTION_TRIGGER, + .index = index, + .start = 0, + .count = 0, + }; + + ioctl(vbasedev->fd, VFIO_DEVICE_SET_IRQS, &irq_set); +} + +void vfio_unmask_single_irqindex(VFIODevice *vbasedev, int index) +{ + struct vfio_irq_set irq_set = { + .argsz = sizeof(irq_set), + .flags = VFIO_IRQ_SET_DATA_NONE | VFIO_IRQ_SET_ACTION_UNMASK, + .index = index, + .start = 0, + .count = 1, + }; + + ioctl(vbasedev->fd, VFIO_DEVICE_SET_IRQS, &irq_set); +} + +void vfio_mask_single_irqindex(VFIODevice *vbasedev, int index) +{ + struct vfio_irq_set irq_set = { + .argsz = sizeof(irq_set), + .flags = VFIO_IRQ_SET_DATA_NONE | VFIO_IRQ_SET_ACTION_MASK, + .index = index, + .start = 0, + .count = 1, + }; + + ioctl(vbasedev->fd, VFIO_DEVICE_SET_IRQS, &irq_set); +} + +/* + * IO Port/MMIO - Beware of the endians, VFIO is always little endian + */ +void vfio_region_write(void *opaque, hwaddr addr, + uint64_t data, unsigned size) +{ + VFIORegion *region = opaque; + VFIODevice *vbasedev = region->vbasedev; + union { + uint8_t byte; + uint16_t word; + uint32_t dword; + uint64_t qword; + } buf; + + switch (size) { + case 1: + buf.byte = data; + break; + case 2: + buf.word = cpu_to_le16(data); + break; + case 4: + buf.dword = cpu_to_le32(data); + break; + default: + hw_error("vfio: unsupported write size, %d bytes", size); + break; + } + + if (pwrite(vbasedev->fd, &buf, size, region->fd_offset + addr) != size) { + error_report("%s(%s:region%d+0x%"HWADDR_PRIx", 0x%"PRIx64 + ",%d) failed: %m", + __func__, vbasedev->name, region->nr, + addr, data, size); + } + + trace_vfio_region_write(vbasedev->name, region->nr, addr, data, size); + + /* + * A read or write to a BAR always signals an INTx EOI. This will + * do nothing if not pending (including not in INTx mode). We assume + * that a BAR access is in response to an interrupt and that BAR + * accesses will service the interrupt. Unfortunately, we don't know + * which access will service the interrupt, so we're potentially + * getting quite a few host interrupts per guest interrupt. + */ + vbasedev->ops->vfio_eoi(vbasedev); +} + +uint64_t vfio_region_read(void *opaque, + hwaddr addr, unsigned size) +{ + VFIORegion *region = opaque; + VFIODevice *vbasedev = region->vbasedev; + union { + uint8_t byte; + uint16_t word; + uint32_t dword; + uint64_t qword; + } buf; + uint64_t data = 0; + + if (pread(vbasedev->fd, &buf, size, region->fd_offset + addr) != size) { + error_report("%s(%s:region%d+0x%"HWADDR_PRIx", %d) failed: %m", + __func__, vbasedev->name, region->nr, + addr, size); + return (uint64_t)-1; + } + switch (size) { + case 1: + data = buf.byte; + break; + case 2: + data = le16_to_cpu(buf.word); + break; + case 4: + data = le32_to_cpu(buf.dword); + break; + default: + hw_error("vfio: unsupported read size, %d bytes", size); + break; + } + + trace_vfio_region_read(vbasedev->name, region->nr, addr, size, data); + + /* Same as write above */ + vbasedev->ops->vfio_eoi(vbasedev); + + return data; +} + +const MemoryRegionOps vfio_region_ops = { + .read = vfio_region_read, + .write = vfio_region_write, + .endianness = DEVICE_LITTLE_ENDIAN, +}; + +/* + * DMA - Mapping and unmapping for the "type1" IOMMU interface used on x86 + */ +static int vfio_dma_unmap(VFIOContainer *container, + hwaddr iova, ram_addr_t size) +{ + struct vfio_iommu_type1_dma_unmap unmap = { + .argsz = sizeof(unmap), + .flags = 0, + .iova = iova, + .size = size, + }; + + if (ioctl(container->fd, VFIO_IOMMU_UNMAP_DMA, &unmap)) { + error_report("VFIO_UNMAP_DMA: %d\n", -errno); + return -errno; + } + + return 0; +} + +static int vfio_dma_map(VFIOContainer *container, hwaddr iova, + ram_addr_t size, void *vaddr, bool readonly) +{ + struct vfio_iommu_type1_dma_map map = { + .argsz = sizeof(map), + .flags = VFIO_DMA_MAP_FLAG_READ, + .vaddr = (__u64)(uintptr_t)vaddr, + .iova = iova, + .size = size, + }; + + if (!readonly) { + map.flags |= VFIO_DMA_MAP_FLAG_WRITE; + } + + /* + * Try the mapping, if it fails with EBUSY, unmap the region and try + * again. This shouldn't be necessary, but we sometimes see it in + * the the VGA ROM space. + */ + if (ioctl(container->fd, VFIO_IOMMU_MAP_DMA, &map) == 0 || + (errno == EBUSY && vfio_dma_unmap(container, iova, size) == 0 && + ioctl(container->fd, VFIO_IOMMU_MAP_DMA, &map) == 0)) { + return 0; + } + + error_report("VFIO_MAP_DMA: %d\n", -errno); + return -errno; +} + +static bool vfio_listener_skipped_section(MemoryRegionSection *section) +{ + return (!memory_region_is_ram(section->mr) && + !memory_region_is_iommu(section->mr)) || + /* + * Sizing an enabled 64-bit BAR can cause spurious mappings to + * addresses in the upper part of the 64-bit address space. These + * are never accessed by the CPU and beyond the address width of + * some IOMMU hardware. TODO: VFIO should tell us the IOMMU width. + */ + section->offset_within_address_space & (1ULL << 63); +} + +static void vfio_iommu_map_notify(Notifier *n, void *data) +{ + VFIOGuestIOMMU *giommu = container_of(n, VFIOGuestIOMMU, n); + VFIOContainer *container = giommu->container; + IOMMUTLBEntry *iotlb = data; + MemoryRegion *mr; + hwaddr xlat; + hwaddr len = iotlb->addr_mask + 1; + void *vaddr; + int ret; + + trace_vfio_iommu_map_notify(iotlb->iova, + iotlb->iova + iotlb->addr_mask); + + /* + * The IOMMU TLB entry we have just covers translation through + * this IOMMU to its immediate target. We need to translate + * it the rest of the way through to memory. + */ + mr = address_space_translate(&address_space_memory, + iotlb->translated_addr, + &xlat, &len, iotlb->perm & IOMMU_WO); + if (!memory_region_is_ram(mr)) { + error_report("iommu map to non memory area %"HWADDR_PRIx"\n", + xlat); + return; + } + /* + * Translation truncates length to the IOMMU page size, + * check that it did not truncate too much. + */ + if (len & iotlb->addr_mask) { + error_report("iommu has granularity incompatible with target AS\n"); + return; + } + + if ((iotlb->perm & IOMMU_RW) != IOMMU_NONE) { + vaddr = memory_region_get_ram_ptr(mr) + xlat; + ret = vfio_dma_map(container, iotlb->iova, + iotlb->addr_mask + 1, vaddr, + !(iotlb->perm & IOMMU_WO) || mr->readonly); + if (ret) { + error_report("vfio_dma_map(%p, 0x%"HWADDR_PRIx", " + "0x%"HWADDR_PRIx", %p) = %d (%m)", + container, iotlb->iova, + iotlb->addr_mask + 1, vaddr, ret); + } + } else { + ret = vfio_dma_unmap(container, iotlb->iova, iotlb->addr_mask + 1); + if (ret) { + error_report("vfio_dma_unmap(%p, 0x%"HWADDR_PRIx", " + "0x%"HWADDR_PRIx") = %d (%m)", + container, iotlb->iova, + iotlb->addr_mask + 1, ret); + } + } +} + +static void vfio_listener_region_add(MemoryListener *listener, + MemoryRegionSection *section) +{ + VFIOContainer *container = container_of(listener, VFIOContainer, + iommu_data.type1.listener); + hwaddr iova, end; + Int128 llend; + void *vaddr; + int ret; + + if (vfio_listener_skipped_section(section)) { + trace_vfio_listener_region_add_skip( + section->offset_within_address_space, + section->offset_within_address_space + + int128_get64(int128_sub(section->size, int128_one()))); + return; + } + + if (unlikely((section->offset_within_address_space & ~TARGET_PAGE_MASK) != + (section->offset_within_region & ~TARGET_PAGE_MASK))) { + error_report("%s received unaligned region", __func__); + return; + } + + iova = TARGET_PAGE_ALIGN(section->offset_within_address_space); + llend = int128_make64(section->offset_within_address_space); + llend = int128_add(llend, section->size); + llend = int128_and(llend, int128_exts64(TARGET_PAGE_MASK)); + + if (int128_ge(int128_make64(iova), llend)) { + return; + } + + memory_region_ref(section->mr); + + if (memory_region_is_iommu(section->mr)) { + VFIOGuestIOMMU *giommu; + + trace_vfio_listener_region_add_iommu(iova, + int128_get64(int128_sub(llend, int128_one()))); + /* + * FIXME: We should do some checking to see if the + * capabilities of the host VFIO IOMMU are adequate to model + * the guest IOMMU + * + * FIXME: For VFIO iommu types which have KVM acceleration to + * avoid bouncing all map/unmaps through qemu this way, this + * would be the right place to wire that up (tell the KVM + * device emulation the VFIO iommu handles to use). + */ + /* + * This assumes that the guest IOMMU is empty of + * mappings at this point. + * + * One way of doing this is: + * 1. Avoid sharing IOMMUs between emulated devices or different + * IOMMU groups. + * 2. Implement VFIO_IOMMU_ENABLE in the host kernel to fail if + * there are some mappings in IOMMU. + * + * VFIO on SPAPR does that. Other IOMMU models may do that different, + * they must make sure there are no existing mappings or + * loop through existing mappings to map them into VFIO. + */ + giommu = g_malloc0(sizeof(*giommu)); + giommu->iommu = section->mr; + giommu->container = container; + giommu->n.notify = vfio_iommu_map_notify; + QLIST_INSERT_HEAD(&container->giommu_list, giommu, giommu_next); + memory_region_register_iommu_notifier(giommu->iommu, &giommu->n); + + return; + } + + /* Here we assume that memory_region_is_ram(section->mr)==true */ + + end = int128_get64(llend); + vaddr = memory_region_get_ram_ptr(section->mr) + + section->offset_within_region + + (iova - section->offset_within_address_space); + + trace_vfio_listener_region_add_ram(iova, end - 1, vaddr); + + ret = vfio_dma_map(container, iova, end - iova, vaddr, section->readonly); + if (ret) { + error_report("vfio_dma_map(%p, 0x%"HWADDR_PRIx", " + "0x%"HWADDR_PRIx", %p) = %d (%m)", + container, iova, end - iova, vaddr, ret); + + /* + * On the initfn path, store the first error in the container so we + * can gracefully fail. Runtime, there's not much we can do other + * than throw a hardware error. + */ + if (!container->iommu_data.type1.initialized) { + if (!container->iommu_data.type1.error) { + container->iommu_data.type1.error = ret; + } + } else { + hw_error("vfio: DMA mapping failed, unable to continue"); + } + } +} + +static void vfio_listener_region_del(MemoryListener *listener, + MemoryRegionSection *section) +{ + VFIOContainer *container = container_of(listener, VFIOContainer, + iommu_data.type1.listener); + hwaddr iova, end; + int ret; + + if (vfio_listener_skipped_section(section)) { + trace_vfio_listener_region_del_skip( + section->offset_within_address_space, + section->offset_within_address_space + + int128_get64(int128_sub(section->size, int128_one()))); + return; + } + + if (unlikely((section->offset_within_address_space & ~TARGET_PAGE_MASK) != + (section->offset_within_region & ~TARGET_PAGE_MASK))) { + error_report("%s received unaligned region", __func__); + return; + } + + if (memory_region_is_iommu(section->mr)) { + VFIOGuestIOMMU *giommu; + + QLIST_FOREACH(giommu, &container->giommu_list, giommu_next) { + if (giommu->iommu == section->mr) { + memory_region_unregister_iommu_notifier(&giommu->n); + QLIST_REMOVE(giommu, giommu_next); + g_free(giommu); + break; + } + } + + /* + * FIXME: We assume the one big unmap below is adequate to + * remove any individual page mappings in the IOMMU which + * might have been copied into VFIO. This works for a page table + * based IOMMU where a big unmap flattens a large range of IO-PTEs. + * That may not be true for all IOMMU types. + */ + } + + iova = TARGET_PAGE_ALIGN(section->offset_within_address_space); + end = (section->offset_within_address_space + int128_get64(section->size)) & + TARGET_PAGE_MASK; + + if (iova >= end) { + return; + } + + trace_vfio_listener_region_del(iova, end - 1); + + ret = vfio_dma_unmap(container, iova, end - iova); + memory_region_unref(section->mr); + if (ret) { + error_report("vfio_dma_unmap(%p, 0x%"HWADDR_PRIx", " + "0x%"HWADDR_PRIx") = %d (%m)", + container, iova, end - iova, ret); + } +} + +const MemoryListener vfio_memory_listener = { + .region_add = vfio_listener_region_add, + .region_del = vfio_listener_region_del, +}; + +void vfio_listener_release(VFIOContainer *container) +{ + memory_listener_unregister(&container->iommu_data.type1.listener); +} + +int vfio_mmap_region(Object *obj, VFIORegion *region, + MemoryRegion *mem, MemoryRegion *submem, + void **map, size_t size, off_t offset, + const char *name) +{ + int ret = 0; + VFIODevice *vbasedev = region->vbasedev; + + if (VFIO_ALLOW_MMAP && size && region->flags & + VFIO_REGION_INFO_FLAG_MMAP) { + int prot = 0; + + if (region->flags & VFIO_REGION_INFO_FLAG_READ) { + prot |= PROT_READ; + } + + if (region->flags & VFIO_REGION_INFO_FLAG_WRITE) { + prot |= PROT_WRITE; + } + + *map = mmap(NULL, size, prot, MAP_SHARED, + vbasedev->fd, + region->fd_offset + offset); + if (*map == MAP_FAILED) { + *map = NULL; + ret = -errno; + goto empty_region; + } + + memory_region_init_ram_ptr(submem, obj, name, size, *map); + memory_region_set_skip_dump(submem); + } else { +empty_region: + /* Create a zero sized sub-region to make cleanup easy. */ + memory_region_init(submem, obj, name, 0); + } + + memory_region_add_subregion(mem, offset, submem); + + return ret; +} + +void vfio_reset_handler(void *opaque) +{ + VFIOGroup *group; + VFIODevice *vbasedev; + + QLIST_FOREACH(group, &vfio_group_list, next) { + QLIST_FOREACH(vbasedev, &group->device_list, next) { + vbasedev->ops->vfio_compute_needs_reset(vbasedev); + } + } + + QLIST_FOREACH(group, &vfio_group_list, next) { + QLIST_FOREACH(vbasedev, &group->device_list, next) { + if (vbasedev->needs_reset) { + vbasedev->ops->vfio_hot_reset_multi(vbasedev); + } + } + } +} + +static void vfio_kvm_device_add_group(VFIOGroup *group) +{ +#ifdef CONFIG_KVM + struct kvm_device_attr attr = { + .group = KVM_DEV_VFIO_GROUP, + .attr = KVM_DEV_VFIO_GROUP_ADD, + .addr = (uint64_t)(unsigned long)&group->fd, + }; + + if (!kvm_enabled()) { + return; + } + + if (vfio_kvm_device_fd < 0) { + struct kvm_create_device cd = { + .type = KVM_DEV_TYPE_VFIO, + }; + + if (kvm_vm_ioctl(kvm_state, KVM_CREATE_DEVICE, &cd)) { + error_report("KVM_CREATE_DEVICE: %m\n"); + return; + } + + vfio_kvm_device_fd = cd.fd; + } + + if (ioctl(vfio_kvm_device_fd, KVM_SET_DEVICE_ATTR, &attr)) { + error_report("Failed to add group %d to KVM VFIO device: %m", + group->groupid); + } +#endif +} + +static void vfio_kvm_device_del_group(VFIOGroup *group) +{ +#ifdef CONFIG_KVM + struct kvm_device_attr attr = { + .group = KVM_DEV_VFIO_GROUP, + .attr = KVM_DEV_VFIO_GROUP_DEL, + .addr = (uint64_t)(unsigned long)&group->fd, + }; + + if (vfio_kvm_device_fd < 0) { + return; + } + + if (ioctl(vfio_kvm_device_fd, KVM_SET_DEVICE_ATTR, &attr)) { + error_report("Failed to remove group %d from KVM VFIO device: %m", + group->groupid); + } +#endif +} + +static VFIOAddressSpace *vfio_get_address_space(AddressSpace *as) +{ + VFIOAddressSpace *space; + + QLIST_FOREACH(space, &vfio_address_spaces, list) { + if (space->as == as) { + return space; + } + } + + /* No suitable VFIOAddressSpace, create a new one */ + space = g_malloc0(sizeof(*space)); + space->as = as; + QLIST_INIT(&space->containers); + + QLIST_INSERT_HEAD(&vfio_address_spaces, space, list); + + return space; +} + +static void vfio_put_address_space(VFIOAddressSpace *space) +{ + if (QLIST_EMPTY(&space->containers)) { + QLIST_REMOVE(space, list); + g_free(space); + } +} + +static int vfio_connect_container(VFIOGroup *group, AddressSpace *as) +{ + VFIOContainer *container; + int ret, fd; + VFIOAddressSpace *space; + + space = vfio_get_address_space(as); + + QLIST_FOREACH(container, &space->containers, next) { + if (!ioctl(group->fd, VFIO_GROUP_SET_CONTAINER, &container->fd)) { + group->container = container; + QLIST_INSERT_HEAD(&container->group_list, group, container_next); + return 0; + } + } + + fd = qemu_open("/dev/vfio/vfio", O_RDWR); + if (fd < 0) { + error_report("vfio: failed to open /dev/vfio/vfio: %m"); + ret = -errno; + goto put_space_exit; + } + + ret = ioctl(fd, VFIO_GET_API_VERSION); + if (ret != VFIO_API_VERSION) { + error_report("vfio: supported vfio version: %d, " + "reported version: %d", VFIO_API_VERSION, ret); + ret = -EINVAL; + goto close_fd_exit; + } + + container = g_malloc0(sizeof(*container)); + container->space = space; + container->fd = fd; + if (ioctl(fd, VFIO_CHECK_EXTENSION, VFIO_TYPE1_IOMMU)) { + ret = ioctl(group->fd, VFIO_GROUP_SET_CONTAINER, &fd); + if (ret) { + error_report("vfio: failed to set group container: %m"); + ret = -errno; + goto free_container_exit; + } + + ret = ioctl(fd, VFIO_SET_IOMMU, VFIO_TYPE1_IOMMU); + if (ret) { + error_report("vfio: failed to set iommu for container: %m"); + ret = -errno; + goto free_container_exit; + } + + container->iommu_data.type1.listener = vfio_memory_listener; + container->iommu_data.release = vfio_listener_release; + + memory_listener_register(&container->iommu_data.type1.listener, + container->space->as); + + if (container->iommu_data.type1.error) { + ret = container->iommu_data.type1.error; + error_report("vfio: memory listener initialization failed for container"); + goto listener_release_exit; + } + + container->iommu_data.type1.initialized = true; + + } else if (ioctl(fd, VFIO_CHECK_EXTENSION, VFIO_SPAPR_TCE_IOMMU)) { + ret = ioctl(group->fd, VFIO_GROUP_SET_CONTAINER, &fd); + if (ret) { + error_report("vfio: failed to set group container: %m"); + ret = -errno; + goto free_container_exit; + } + ret = ioctl(fd, VFIO_SET_IOMMU, VFIO_SPAPR_TCE_IOMMU); + if (ret) { + error_report("vfio: failed to set iommu for container: %m"); + ret = -errno; + goto free_container_exit; + } + + /* + * The host kernel code implementing VFIO_IOMMU_DISABLE is called + * when container fd is closed so we do not call it explicitly + * in this file. + */ + ret = ioctl(fd, VFIO_IOMMU_ENABLE); + if (ret) { + error_report("vfio: failed to enable container: %m"); + ret = -errno; + goto free_container_exit; + } + + container->iommu_data.type1.listener = vfio_memory_listener; + container->iommu_data.release = vfio_listener_release; + + memory_listener_register(&container->iommu_data.type1.listener, + container->space->as); + + } else { + error_report("vfio: No available IOMMU models"); + ret = -EINVAL; + goto free_container_exit; + } + + QLIST_INIT(&container->group_list); + QLIST_INSERT_HEAD(&space->containers, container, next); + + group->container = container; + QLIST_INSERT_HEAD(&container->group_list, group, container_next); + + return 0; +listener_release_exit: + vfio_listener_release(container); + +free_container_exit: + g_free(container); + +close_fd_exit: + close(fd); + +put_space_exit: + vfio_put_address_space(space); + + return ret; +} + +static void vfio_disconnect_container(VFIOGroup *group) +{ + VFIOContainer *container = group->container; + + if (ioctl(group->fd, VFIO_GROUP_UNSET_CONTAINER, &container->fd)) { + error_report("vfio: error disconnecting group %d from container", + group->groupid); + } + + QLIST_REMOVE(group, container_next); + group->container = NULL; + + if (QLIST_EMPTY(&container->group_list)) { + VFIOAddressSpace *space = container->space; + + if (container->iommu_data.release) { + container->iommu_data.release(container); + } + QLIST_REMOVE(container, next); + trace_vfio_disconnect_container(container->fd); + close(container->fd); + g_free(container); + + vfio_put_address_space(space); + } +} + +VFIOGroup *vfio_get_group(int groupid, AddressSpace *as) +{ + VFIOGroup *group; + char path[32]; + struct vfio_group_status status = { .argsz = sizeof(status) }; + + QLIST_FOREACH(group, &vfio_group_list, next) { + if (group->groupid == groupid) { + /* Found it. Now is it already in the right context? */ + if (group->container->space->as == as) { + return group; + } else { + error_report("vfio: group %d used in multiple address spaces", + group->groupid); + return NULL; + } + } + } + + group = g_malloc0(sizeof(*group)); + + snprintf(path, sizeof(path), "/dev/vfio/%d", groupid); + group->fd = qemu_open(path, O_RDWR); + if (group->fd < 0) { + error_report("vfio: error opening %s: %m", path); + goto free_group_exit; + } + + if (ioctl(group->fd, VFIO_GROUP_GET_STATUS, &status)) { + error_report("vfio: error getting group status: %m"); + goto close_fd_exit; + } + + if (!(status.flags & VFIO_GROUP_FLAGS_VIABLE)) { + error_report("vfio: error, group %d is not viable, please ensure " + "all devices within the iommu_group are bound to their " + "vfio bus driver.", groupid); + goto close_fd_exit; + } + + group->groupid = groupid; + QLIST_INIT(&group->device_list); + + if (vfio_connect_container(group, as)) { + error_report("vfio: failed to setup container for group %d", groupid); + goto close_fd_exit; + } + + if (QLIST_EMPTY(&vfio_group_list)) { + qemu_register_reset(vfio_reset_handler, NULL); + } + + QLIST_INSERT_HEAD(&vfio_group_list, group, next); + + vfio_kvm_device_add_group(group); + + return group; + +close_fd_exit: + close(group->fd); + +free_group_exit: + g_free(group); + + return NULL; +} + +void vfio_put_group(VFIOGroup *group) +{ + if (!QLIST_EMPTY(&group->device_list)) { + return; + } + + vfio_kvm_device_del_group(group); + vfio_disconnect_container(group); + QLIST_REMOVE(group, next); + trace_vfio_put_group(group->fd); + close(group->fd); + g_free(group); + + if (QLIST_EMPTY(&vfio_group_list)) { + qemu_unregister_reset(vfio_reset_handler, NULL); + } +} + +int vfio_get_device(VFIOGroup *group, const char *name, + VFIODevice *vbasedev) +{ + struct vfio_device_info dev_info = { .argsz = sizeof(dev_info) }; + int ret; + + ret = ioctl(group->fd, VFIO_GROUP_GET_DEVICE_FD, name); + if (ret < 0) { + error_report("vfio: error getting device %s from group %d: %m", + name, group->groupid); + error_printf("Verify all devices in group %d are bound to vfio-<bus> " + "or pci-stub and not already in use\n", group->groupid); + return ret; + } + + vbasedev->fd = ret; + vbasedev->group = group; + QLIST_INSERT_HEAD(&group->device_list, vbasedev, next); + + ret = ioctl(vbasedev->fd, VFIO_DEVICE_GET_INFO, &dev_info); + if (ret) { + error_report("vfio: error getting device info: %m"); + goto error; + } + + vbasedev->num_irqs = dev_info.num_irqs; + vbasedev->num_regions = dev_info.num_regions; + vbasedev->flags = dev_info.flags; + + trace_vfio_get_device(name, dev_info.flags, dev_info.num_regions, + dev_info.num_irqs); + + vbasedev->reset_works = !!(dev_info.flags & VFIO_DEVICE_FLAGS_RESET); + + ret = vbasedev->ops->vfio_populate_device(vbasedev); + +error: + if (ret) { + vfio_put_base_device(vbasedev); + } + return ret; +} + +void vfio_put_base_device(VFIODevice *vbasedev) +{ + QLIST_REMOVE(vbasedev, next); + vbasedev->group = NULL; + trace_vfio_put_base_device(vbasedev->fd); + close(vbasedev->fd); +} + +static int vfio_container_do_ioctl(AddressSpace *as, int32_t groupid, + int req, void *param) +{ + VFIOGroup *group; + VFIOContainer *container; + int ret = -1; + + group = vfio_get_group(groupid, as); + if (!group) { + error_report("vfio: group %d not registered", groupid); + return ret; + } + + container = group->container; + if (group->container) { + ret = ioctl(container->fd, req, param); + if (ret < 0) { + error_report("vfio: failed to ioctl container: ret=%d, %s", + ret, strerror(errno)); + } + } + + vfio_put_group(group); + + return ret; +} + +int vfio_container_ioctl(AddressSpace *as, int32_t groupid, + int req, void *param) +{ + /* We allow only certain ioctls to the container */ + switch (req) { + case VFIO_CHECK_EXTENSION: + case VFIO_IOMMU_SPAPR_TCE_GET_INFO: + break; + default: + /* Return an error on unknown requests */ + error_report("vfio: unsupported ioctl %X", req); + return -1; + } + + return vfio_container_do_ioctl(as, groupid, req, param); +} |