summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2013-12-10Merge remote-tracking branch 'alon/libcacard_ccid.4' into stagingAnthony Liguori1-2/+2
# By Stefan Weil # Via Alon Levy * alon/libcacard_ccid.4: libcacard: Fix compilation for older versions of glib (bug #1258168) Message-id: 1386596263-26151-1-git-send-email-alevy@redhat.com Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-12-10Merge remote-tracking branch 'mjt/trivial-patches' into stagingAnthony Liguori1-0/+1
# By Stefan Weil # Via Michael Tokarev * mjt/trivial-patches: qxl: Add missing trace.h (fix broken build) Message-id: 1386441094-9971-1-git-send-email-mjt@msgid.tls.msk.ru Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-12-10tcg: Use bitmaps for free temporariesRichard Henderson2-22/+21
We previously allocated 32-bits per temp for the next_free_temp entry. We now allocate 4 bits per temp across the 4 bitmaps. Using a linked list meant that if a translator is tweeked, resulting in temps being freed in a different order, that would have follow-on effects throughout the TB. Always allocating the lowest free temp means that follow-on effects are minimized, which can make it easier to diff output when debugging the translators. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-12-10target-arm: fix TTBCR write maskingSergey Fedorov1-1/+1
Current implementation is not accurate according to ARMv7-AR reference manual. See "B4.1.153 TTBCR, Translation Table Base Control Register, VMSA | TTBCR format when using the Long-descriptor translation table format". When LPAE feature is supported, EAE, bit[31] selects translation descriptor format and, therefore, TTBCR format. Signed-off-by: Sergey Fedorov <s.fedorov@samsung.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1386657709-23399-1-git-send-email-s.fedorov@samsung.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10target-arm: Use new qemu_ld/st opcodesRichard Henderson1-31/+25
Retain the existing gen_aa32_* inlines, to aid compilation for A64. Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net> Message-id: 1386628626-21627-1-git-send-email-rth@twiddle.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10target-arm: Implement ARMv8 SIMD VMAXNM and VMINNM instructions.Will Newton1-9/+22
This adds support for the ARMv8 Advanced SIMD VMAXNM and VMINNM instructions. Signed-off-by: Will Newton <will.newton@linaro.org> Message-id: 1386158099-9239-7-git-send-email-will.newton@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10target-arm: Implement ARMv8 FP VMAXNM and VMINNM instructions.Will Newton3-0/+80
This adds support for the ARMv8 floating point VMAXNM and VMINNM instructions. Signed-off-by: Will Newton <will.newton@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1386158099-9239-6-git-send-email-will.newton@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10softfloat: Add minNum() and maxNum() functions to softfloat.Will Newton2-3/+33
Add floatnn_minnum() and floatnn_maxnum() functions which are equivalent to the minNum() and maxNum() functions from IEEE 754-2008. They are similar to min() and max() but differ in the handling of QNaN arguments. Signed-off-by: Will Newton <will.newton@linaro.org> Message-id: 1386158099-9239-5-git-send-email-will.newton@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10softfloat: Remove unused argument from MINMAX macro.Will Newton1-3/+3
The nan_exp argument is not used, so remove it. Signed-off-by: Will Newton <will.newton@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1386158099-9239-4-git-send-email-will.newton@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10target-arm: Implement ARMv8 VSEL instruction.Will Newton1-1/+134
This adds support for the VSEL floating point selection instruction which was added in ARMv8. Signed-off-by: Will Newton <will.newton@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1386158099-9239-3-git-send-email-will.newton@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10target-arm: Move call to disas_vfp_insn out of disas_coproc_insn.Will Newton1-5/+27
Floating point is an extension to the instruction set rather than a coprocessor, so call it directly from the ARM and Thumb decode functions. Signed-off-by: Will Newton <will.newton@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1386158099-9239-2-git-send-email-will.newton@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10net/cadence_gem: Don't rx packets when no rx buffer availablePeter Crosthwaite1-1/+10
Return false from can_receive() when no valid buffer descriptor is available. Ensures against mass packet droppage in some applications. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: cde00ef774e84e2586bf10fd37b542f75bf36cfb.1386136219.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10net/cadence_gem: Improve can_receive debug printferyPeter Crosthwaite1-2/+10
Currently this just floods indicating that can_receive has been called by the net framework. Instead, save the result of the most recent can_receive callback as state and only print a message if the result changes (indicating some sort of actual state change in GEM). Make said debug message more meaningful as well. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 2eb74ca6a5756aea242d9f525961db95d6cfcf2c.1386136219.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10net/cadence_gem: Fix register w1c logicPeter Crosthwaite1-7/+6
This write-1-clear logic was incorrect. It was always clearing w1c bits regardless of whether the written value was 1 or not. i.e. it was implementing a write-anything-to-clear strategy. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: ed905b04d3343966ded425f06aa2224bc7a35b59.1386136219.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10net/cadence_gem: Fix small packet FCS strippingPeter Crosthwaite1-5/+8
The minimum packet size is 64, however this is before FCS stripping occurs. So when FCS stripping the minimum packet size is 60. Fix. Reported-by: Deepika Dhamija <deepika@xilinx.com> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 8aac5bd737f9cf48b87f32943d7eb5939061e546.1386136219.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10net/cadence_gem: Fix rx multi-fragment packetsPeter Crosthwaite1-1/+1
Bytes_to_copy was being updated before its final use where it advances the rx buffer pointer. This was causing total mayhem, where packet data for any subsequent fragments was being fetched from the wrong place. Reported-by: Deepika Dhamija <deepika@xilinx.com> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: c2a1c65c1fd06eb274442a0fa4a6839d940e145e.1386136219.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10net/cadence_gem: Add missing VMSTATE_END_OF_LISTPeter Crosthwaite1-0/+1
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 8f8c2bfb15f40fb5f0d5766aa4cd3d54c596de6a.1386136219.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10net/cadence_gem: Implement SAR (de)activationPeter Crosthwaite1-4/+23
The Specific address registers can be enabled or disabled by software. QEMU was assuming they were always enabled. Implement the disable/enable feature. SARs are disabled by writing to the lower half register. They are re-enabled by then writing the upper half. Reported-by: Deepika Dhamija <deepika@xilinx.com> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 49efd1f7450af8f980b967d3054245bae137866c.1386136219.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10net/cadence_gem: Implement SAR match bit in rx descPeter Crosthwaite1-0/+2
Bit 27 of the RX buffer desc word 1 should be set when the packet was accepted due to specific address register match. Implement. This feature is absent from the Xilinx documentation (UG585) but the behaviour is tested as accurate on real hardware. Reported-by: Deepika Dhamija <deepika@xilinx.com> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 7e3f26fc4ab244e8123efc12723e7164730abdcb.1386136219.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10net/cadence_gem: Implement RX descriptor match mode flagsPeter Crosthwaite1-13/+69
The various Rx packet address matching mode flags were not being set in the rx descriptor. Implement. Reported-by: Deepika Dhamija <deepika@xilinx.com> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 6002a24a6a8ceaa11d3009ab5392840d1c084b28.1386136219.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10net/cadence_gem: Prefetch rx descriptors ASAPPeter Crosthwaite1-27/+35
The real hardware prefetches rx buffer descriptors ASAP and potentially throws relevant interrupts following the fetch even in the absence of a received packet. Reported-by: Deepika Dhamija <deepika@xilinx.com> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 41629e35edfdb1f02f1e401f2c3d0e2e4c9e44b3.1386136219.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10net/cadence_gem: simplify rx buf descriptor walkingPeter Crosthwaite1-28/+9
There was a replication of the rx descriptor address walking logic. Reorder the flow control to remove. This refactoring also obsoletes the local variables packet_desc_addr and last_desc_addr. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 2a425b457ff0b57274bf206ad2236690cd7f5909.1386136219.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10net/cadence_gem: Don't assert against 0 buffer addressPeter Crosthwaite1-9/+0
This has no real hardware analog and asserting correctness of DMA addresses is not a perhiperal level problem. Delete. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: fc02417eb1874cb05e4f20531c6203c5a00110f1.1386136219.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10net/cadence_gem: Update DMA rx descriptors as we process themEdgar E. Iglesias1-17/+16
We were updating the ownership bit of all descriptors if packets get split and written through several descriptors. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: d61b7847b51487118783c93765a485bc5c66d272.1386136219.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10net/cadence_gem: Implement mac level loopback modePeter Crosthwaite1-1/+1
Cadence GEM has a MAC level loopback mode. Implement. Use the same basic operation as the already implemented PHY loopback. Reported-by: Deepika Dhamija <deepika@xilinx.com> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 3a0baf1b6b2fc1be638bdf1a37408ec38988e970.1386136219.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10hw/arm/virt: Support -cpu hostPeter Maydell1-0/+8
Support -cpu host in virt machine (treating it like an A15, ie with a GIC v2 and the A15's private peripherals.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Message-id: 1385140638-10444-12-git-send-email-peter.maydell@linaro.org
2013-12-10target-arm: Provide '-cpu host' when running KVMPeter Maydell3-0/+285
Implement '-cpu host' for ARM when we're using KVM, broadly in line with other KVM-supporting architectures. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Message-id: 1385140638-10444-11-git-send-email-peter.maydell@linaro.org
2013-12-10target-arm: Don't hardcode KVM target CPU to be A15Peter Maydell4-1/+24
Instead of assuming that a KVM target CPU must always be a Cortex-A15 and hardcoding this in kvm_arch_init_vcpu(), store the KVM_ARM_TARGET_* value in the ARMCPU class, and use that. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Message-id: 1385140638-10444-10-git-send-email-peter.maydell@linaro.org
2013-12-10hw/arm: Add 'virt' platformPeter Maydell2-1/+445
Add 'virt' platform support corresponding to arch/arm/mach-virt in the Linux kernel tree. This has no platform-specific code but can use any device whose kernel driver is is able to work purely from a device tree node. We use this to instantiate a minimal set of devices: a GIC and some virtio-mmio transports. Signed-off-by: John Rigby <john.rigby@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Message-id: 1385140638-10444-8-git-send-email-peter.maydell@linaro.org [PMM: Significantly overhauled: * renamed user-facing machine to just "virt" * removed the A9 support (it can't work since the A9 has no generic timers) * added virtio-mmio transports instead of random set of 'soc' devices (though we retain a pl011 UART) * instead of updating io_base as we step through adding devices, define a memory map with an array (similar to vexpress) * similarly, define irqmap with an array * folded in some minor fixes from John's aarch64-support patch * rather than explicitly doing endian-swapping on FDT cells, use fdt APIs that let us just pass in host-endian values and let the fdt layer take care of the swapping * miscellaneous minor code cleanups and style fixes ] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10target-arm: Allow secondary KVM CPUs to be booted via PSCIPeter Maydell3-0/+13
New ARM boards are generally expected to boot their secondary CPUs via the PSCI interface, rather than ad-hoc "loop around in holding pen code" as hw/arm/boot.c implements. In particular this is necessary for mach-virt kernels. For KVM we achieve this by creating the VCPUs with a feature flag marking them as starting in PSCI powered-down state; the guest kernel will then make a PSCI call (implemented in the host kernel) to start the secondaries at an address of its choosing once it has got the primary CPU up. Implement this setting of the feature flag, controlled by a qdev property for ARMCPU, which board code can set if it is a PSCI system. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Message-id: 1385140638-10444-7-git-send-email-peter.maydell@linaro.org
2013-12-10target-arm: Add ARMCPU field for Linux device-tree 'compatible' stringPeter Maydell2-0/+53
Linux requires device tree CPU nodes to include a 'compatible' string describing the CPU. Add a field in the ARMCPU struct for this so that boards which construct a device tree can insert the correct CPU nodes. Note that there is currently no officially specified 'compatible' string for the TI925T, Cortex-M3 or SA1110 CPUs. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Message-id: 1385140638-10444-6-git-send-email-peter.maydell@linaro.org
2013-12-10target-arm: Provide PSCI constants to generic QEMU codePeter Maydell1-0/+12
Provide versions of the KVM PSCI constants to non-KVM code; this will allow us to avoid an ifdef in boards which set up a PSCI node in the device tree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Message-id: 1385140638-10444-5-git-send-email-peter.maydell@linaro.org
2013-12-10hw/arm/boot: Allow boards to provide an fdt blobJohn Rigby2-12/+27
If no fdt is provided on command line and the new field get_dtb in struct arm_boot_info is set then call it to get a device tree blob. Signed-off-by: John Rigby <john.rigby@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Message-id: 1385140638-10444-4-git-send-email-peter.maydell@linaro.org [PMM: minor tweaks and cleanup] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10device_tree.c: Terminate the empty reservemap in create_device_tree()Peter Maydell1-0/+4
Device trees created with create_device_tree() may not have any entries in their reservemap, because the FDT API requires that the reservemap is completed before any FDT nodes are added, and create_device_tree() itself creates a node. However we were not calling fdt_finish_reservemap(), which meant that there was no terminator in the reservemap list and whatever happened to be at the start of the FDT data section would end up being interpreted as reservemap entries. Avoid this by calling fdt_finish_reservemap() to add the terminator. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Alexander Graf <agraf@suse.de> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1385140638-10444-3-git-send-email-peter.maydell@linaro.org
2013-12-10target-arm: Provide mechanism for getting KVM constants even if not CONFIG_KVMPeter Maydell3-20/+43
There are a number of places where it would be convenient for ARM code to have working definitions of KVM constants even in code which is compiled with CONFIG_KVM not set. In this situation we can't simply include the kernel KVM headers (which might conflict with host header definitions or not even compile on the compiler we're using) so we have to redefine equivalent constants. Provide a mechanism for doing this and checking that the values match, and use it for the constants we're currently exposing via an ad-hoc mechanism. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Message-id: 1385140638-10444-2-git-send-email-peter.maydell@linaro.org
2013-12-10cpu/a9mpcore: Add Global TimerFrançois LEGAL2-5/+23
Add the global timer to A9 MPCore. Signed-off-by: François LEGAL <devel@thom.fr.eu.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: ff92f35f438ac671b57d99d823723dd3e62d2c49.1385969450.git.peter.crosthwaite@xilinx.com [PC Changes: * new commit message * split off original version as a separate patch * Rebased against new mpcore implementation (with struct embedding) ] Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10hw/timer: Introduce ARM A9 Global Timer.Peter Crosthwaite4-0/+468
The ARM A9 MPCore has a timer that is global to all cores in the cluster. The timer is shared but each core has a private independent comparator and interrupt. Based on version contributed by Francois LEGAL. Signed-off-by: François LEGAL <devel@thom.fr.eu.org> Message-id: 4918e89476b8da916be2964ec41578b50d569a37.1385969450.git.peter.crosthwaite@xilinx.com [PC changes: * New commit message * Re-implemented as single timer model * Fixed backwards counting issue in polled mode * completed VMSD fields * macroified magic numbers (and headerified reg definitions) * split of as device-model-only patch * use bitops for 64 bit register access * Fixed auto increment mode to check condition properly * general cleanup (names/style etc). ] Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> [PMM: * minor typo fixes * added missing return after error_setg() * dropped setting dc->no_user = 1 ] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10cpu/a9mpcore: reorder operations/declarationsPeter Crosthwaite2-15/+15
To make it consistent for easier code reading. The order in which variables are defined and functions are called is set to match the address map ordering. The new consistent order of doing stuff is: SCU -> GIC -> MPTimer -> WDT. 0 functional change. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 8f31398e6d9a93f57291399f269039da1a77a2b5.1385969450.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10cpu/a9mpcore: rename timerbusdev variablePeter Crosthwaite1-4/+4
Rename this variable for consistency with the above defined mptimerdev variable. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 28939ef95589a62414634e86c47cef76b21b15f7.1385969450.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10integrator/cp: add support for REFCNT registerJan Petrous1-3/+10
Linux kernel from version 3.4 requires CM_REFCNT register for sched timer for Integrator/CP board (integrator_defconfig). See http://infocenter.arm.com/help/topic/com.arm.doc.dui0138e/ch04s06s11.html Signed-off-by: Jan Petrous <jan.petrous@tieto.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10ACPI DSDT: Make control method `IQCR` serializedMichael S. Tsirkin4-6/+6
Forward-port the following commit from seabios: commit 995bbeef78b338370f426bf8d0399038c3fa259c Author: Paul Menzel <paulepanter@users.sourceforge.net> Date: Thu Oct 3 11:30:52 2013 +0200 The ASL Optimizing Compiler version 20130823-32 [Sep 11 2013] issues the following warning. $ make […] Compiling IASL out/src/fw/acpi-dsdt.hex out/src/fw/acpi-dsdt.dsl.i 360: Method(IQCR, 1, NotSerialized) { Remark 2120 - ^ Control Method should be made Serialized (due to creation of named objects within) […] ASL Input: out/src/fw/acpi-dsdt.dsl.i - 475 lines, 19181 bytes, 316 keywords AML Output: out/src/fw/acpi-dsdt.aml - 4407 bytes, 159 named objects, 157 executable opcodes Listing File: out/src/fw/acpi-dsdt.lst - 143715 bytes Hex Dump: out/src/fw/acpi-dsdt.hex - 41661 bytes Compilation complete. 0 Errors, 0 Warnings, 1 Remarks, 246 Optimizations […] After changing the parameter from `NotSerialized` to `Serialized`, the remark is indeed gone and there is no size change. The remark was added in ACPICA version 20130517 [1] and gives the following explanation. If a thread blocks within the method for any reason, and another thread enters the method, the method will fail because an attempt will be made to create the same (named) object twice. In this case, issue a remark that the method should be marked serialized. ACPICA BZ 909. [1] https://github.com/acpica/acpica/commit/ba84d0fc18ba910a47a3f71c68a43543c06e6831 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reported-by: Marcel Apfelbaum <marcel.a@redhat.com> Tested-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-12-10acpi: strip compiler info in built-in DSDTMichael S. Tsirkin1-1/+7
IASL stores it's revision in each table header it generates. That's not nice since guests will see a change each time they move between hypervisors. We generally fill our own info for tables, but we (and seabios) forgot to do this for the built-in DSDT. Modifications in DSDT table: OEM ID: "BXPC" -> "BOCHS " OEM Table ID: "BXDSDT" -> "BXPCDSDT" Compiler ID: "INTL" -> "BXPC" Compiler Version: 0x20130823 -> 0x00000001 Tested-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-12-10acpi unit-test: verify signature and checksumMarcel Apfelbaum1-20/+252
Read all ACPI tables from guest - will be useful for further unit tests. Follow pointers between ACPI tables checking signature and format for correctness. Verify checksum for all tables. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-12-10smbios: Set system manufacturer, product & version by defaultMarkus Armbruster4-1/+59
Currently, we get SeaBIOS defaults: manufacturer Bochs, product Bochs, no version. Best SeaBIOS can do, but we can provide better defaults: manufacturer QEMU, product & version taken from QEMUMachine desc and name. Take care to do this only for new machine types, of course. Note: Michael Tsirkin doesn't trust us to keep values of QEMUMachine member product stable in the future. Use copies instead, and in a way that makes it obvious that they're guest ABI. Note that we can be trusted to keep values of member name, because that has always been ABI. Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-12-10exec: reduce L2_PAGE_SIZEMichael S. Tsirkin1-1/+1
With the single exception of ppc with 16M pages, we get the same number of levels with L2_PAGE_SIZE = 10 as with L2_PAGE_SIZE = 9. by doing this we reduce memory footprint of a single level in the node memory map by 2x without runtime overhead. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-12-10exec: make address spaces 64-bit widePaolo Bonzini1-6/+2
As an alternative to commit 818f86b (exec: limit system memory size, 2013-11-04) let's just make all address spaces 64-bit wide. This eliminates problems with phys_page_find ignoring bits above TARGET_PHYS_ADDR_SPACE_BITS and address_space_translate_internal consequently messing up the computations. In Luiz's reported crash, at startup gdb attempts to read from address 0xffffffffffffffe6 to 0xffffffffffffffff inclusive. The region it gets is the newly introduced master abort region, which is as big as the PCI address space (see pci_bus_init). Due to a typo that's only 2^63-1, not 2^64. But we get it anyway because phys_page_find ignores the upper bits of the physical address. In address_space_translate_internal then diff = int128_sub(section->mr->size, int128_make64(addr)); *plen = int128_get64(int128_min(diff, int128_make64(*plen))); diff becomes negative, and int128_get64 booms. The size of the PCI address space region should be fixed anyway. Reported-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-12-10exec: memory radix tree page level compressionMichael S. Tsirkin1-1/+74
At the moment, memory radix tree is already variable width, but it can only skip the low bits of address. This is efficient if we have huge memory regions but inefficient if we are only using a tiny portion of the address space. After we have built up the map, detect configurations where a single L2 entry is valid. We then speed up the lookup by skipping one or more levels. In case any levels were skipped, we might end up in a valid section instead of erroring out. We handle this by checking that the address is in range of the resulting section. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-12-10exec: pass hw address to phys_page_findMichael S. Tsirkin1-4/+4
callers always shift by target page bits so let's just do this internally. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-12-10exec: extend skip field to 6 bit, page entry to 32 bitMichael S. Tsirkin1-6/+6
Extend skip to 6 bit. As page entry doesn't fit in 16 bit any longer anyway, extend it to 32 bit. This doubles node map memory requirements, but follow-up patches will save this memory. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-12-10exec: replace leaf with skipMichael S. Tsirkin1-8/+9
In preparation for dynamic radix tree depth support, rename is_leaf field to skip, telling us how many bits to skip to next level. Set to 0 for leaf. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.2.1 (git 2.18.0) at 2024-07-11 18:11:51 +0000