summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2013-05-29exec: make io_mem_unassigned privatePaolo Bonzini3-11/+4
There is no reason to avoid a recompile before accessing unassigned memory. In the end it will be treated as MMIO anyway. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-05-29cputlb: simplify tlb_set_pagePaolo Bonzini1-8/+5
The same "if" condition is repeated twice. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-05-29exec: drop useless #ifPaolo Bonzini1-2/+0
This code is only compiled for softmmu targets. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-05-29exec: eliminate io_mem_ramPaolo Bonzini3-19/+4
It is never used, the IOTLB always goes through io_mem_notdirty. In fact in softmmu_template.h, if it were, QEMU would crash just below the tests, as soon as io_mem_read/write dispatches to error_mem_read/write. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-05-26Remove Sun4c, Sun4d and a few CPUsBlue Swirl6-955/+6
Sun4c and Sun4d architectures and related CPUs are not fully implemented (especially Sun4c MMU) and there has been no interest for them. Likewise, a few CPUs (Cypress, Ross etc) are only half implemented. Remove the machines and CPUs, they can be re-added if needed later. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-05-26Remove OSS support for OpenBSDBrad Smith2-7/+2
Remove the OSS support for OpenBSD. The OSS API has not been usable for quite some time. Signed-off-by: Brad Smith <brad@comstyle.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-05-26target-arm: Remove gen_{ld,st}* definitionsPeter Maydell1-46/+0
All the uses of the gen_{ld,st}* functions are gone now, so remove the functions themselves. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-05-26target-arm: Remove gen_{ld,st}* from thumb2 decoderPeter Maydell1-10/+20
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-05-26target-arm: Remove gen_{ld,st}* from Thumb insnsPeter Maydell1-25/+46
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-05-26target-arm: Remove gen_{ld,st}* from basic ARM insnsPeter Maydell1-32/+69
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-05-26target-arm: Remove use of gen_{ld,st}* from ldrex/strexPeter Maydell1-13/+18
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-05-26target-arm: Remove uses of gen_{ld,st}* from Neon codePeter Maydell1-18/+28
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-05-26target-arm: Remove uses of gen_{ld,st}* from iWMMXt codePeter Maydell1-8/+10
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-05-26target-arm: Remove gen_ld64() and gen_st64()Peter Maydell1-15/+4
gen_ld64() and gen_st64() are used only in one place, so just expand them out. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-05-26target-arm: Don't use TCGv when we mean TCGv_i32Peter Maydell1-224/+229
TCGv changes size depending on the compile time value of TARGET_LONG_BITS. This is useful for generating code for MIPS style "instructions are the same but the register width changes" CPUs, and also for the generic bits of QEMU which operate on "width of a virtual address" values, but mostly in the ARM target code we were using it purely as a shorthand for "any 32 bit value". This needs to change in preparation for AArch64 support, since an AArch64-capable v8 core will have 64 bit virtual addresses but still use 32 bit values for the 32 bit instruction set. This patch mechanically converts all the occurrences of TCGv, tcg_temp_new(), tcg_temp_free(), tcg_temp_local_new() and TCGV_UNUSED() to their explicitly 32 bit counterparts. This is correct for everything except the arguments to tcg_gen_qemu_{ld,st}*, which really do need to be TCGv and so will require a 32-to-64 conversion when building the 32 bit code for AArch64. Those changes will be in a separate patch for easier review. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-05-24Merge remote-tracking branch 'bonzini/iommu-for-anthony' into stagingAnthony Liguori14-118/+103
# By Paolo Bonzini (11) and others # Via Paolo Bonzini * bonzini/iommu-for-anthony: memory: clean up phys_page_find memory: populate FlatView for new address spaces memory: limit sections in the radix tree to the actual address space size s390x: reduce TARGET_PHYS_ADDR_SPACE_BITS to 62 memory: fix address space initialization/destruction memory: make memory_global_sync_dirty_bitmap take an AddressSpace memory: do not duplicate memory_region_destructor_none memory: Rename readable flag to romd_mode memory: Replace open-coded memory_region_is_romd memory: allow memory_region_find() to run on non-root memory regions memory: assert that PhysPageEntry's ptr does not overflow exec: eliminate stq_phys_notdirty exec: make qemu_get_ram_ptr private exec: eliminate qemu_put_ram_ptr exec: remove obsolete comment Message-id: 1369414987-8839-1-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-24Merge remote-tracking branch 'stefanha/net' into stagingAnthony Liguori2-1/+5
# By Alasdair McLeay (1) and Stefan Hajnoczi (1) # Via Stefan Hajnoczi * stefanha/net: rtl8139: flush queued packets when RxBufPtr is written net: support for bridged networking on Mac OS X Message-id: 1369406295-20411-1-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-24Merge remote-tracking branch 'stefanha/block' into stagingAnthony Liguori12-159/+361
# By Wenchao Xia (5) and others # Via Stefan Hajnoczi * stefanha/block: coroutine: stop using AioContext in CoQueue coroutine: protect global pool with a mutex qemu-iotests: Try creating huge qcow2 image qcow2.py: Subcommand for changing header fields qemu-io: Fix 'map' output blockdev: Rename BlockdevAction -> TransactionAction block: make all steps in qmp_transaction() as callback block: package rollback code in qmp_transaction() block: package committing code in qmp_transaction() block: move input parsing code in qmp_transaction() block: package preparation code in qmp_transaction() Message-id: 1369405947-14818-1-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-24memory: clean up phys_page_findPaolo Bonzini1-6/+2
Remove the goto. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-05-24memory: populate FlatView for new address spacesPaolo Bonzini1-1/+2
Even a new address space might have a non-empty FlatView. In order to initialize it properly, address_space_init should (a) call memory_region_transaction_commit after the address space is inserted into the list; (b) force memory_region_transaction_commit to do something. This bug was latent so far because all address spaces started empty, including the PCI address space where the bus master region is initially disabled. However, the target address space of an IOMMU is usually rooted at get_system_memory(), which might not be empty at the time the IOMMU is created. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-05-24memory: limit sections in the radix tree to the actual address space sizeAvi Kivity2-1/+15
The radix tree is statically sized to fit TARGET_PHYS_ADDR_SPACE_BITS. If a larger memory region is registered, it will overflow. Fix by limiting any section in the radix tree to the supported size. This problem was not observed earlier since artificial regions (containers and aliases) are eliminated by the memory core, leaving only device regions which have reasonable sizes. An IOMMU however cannot be eliminated by the memory core, and may have an artificial size. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Avi Kivity <avi.kivity@gmail.com> [ Fail the build if TARGET_PHYS_ADDR_SPACE_BITS is too large - Paolo ] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-05-24s390x: reduce TARGET_PHYS_ADDR_SPACE_BITS to 62Paolo Bonzini1-1/+4
With the next patch, the memory API will complain if the TARGET_PHYS_ADDR_SPACE_BITS gets dangerously close to an overflow. s390x can handle up to 64 bit of physical address space from its page tables, but we never use that much. Just decrease the value. Cc: Alexander Graf <agraf@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-05-24memory: fix address space initialization/destructionAvi Kivity1-0/+3
A couple of fields were left uninitialized. This was not observed earlier because all address spaces were statically allocated. Also free allocation for those fields. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Avi Kivity <avi.kivity@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-05-24memory: make memory_global_sync_dirty_bitmap take an AddressSpacePaolo Bonzini3-7/+5
Since this is a MemoryListener operation, it only makes sense on an AddressSpace granularity. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-05-24memory: do not duplicate memory_region_destructor_nonePaolo Bonzini1-5/+0
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-05-24memory: Rename readable flag to romd_modeJan Kiszka4-30/+30
"Readable" is a very unfortunate name for this flag because even a rom_device region will always be readable from the guest POV. What differs is the mapping, just like the comments had to explain already. Also, readable could currently be understood as being a generic region flag, but it only applies to rom_device regions. So rename the flag and the function to modify it after the original term "ROMD" which could also be interpreted as "ROM direct", i.e. ROM mode with direct access. In any case, the scope of the flag is clearer now. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-05-24memory: Replace open-coded memory_region_is_romdJan Kiszka1-1/+1
Improves readability. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2013-05-24memory: allow memory_region_find() to run on non-root memory regionsPaolo Bonzini2-14/+34
memory_region_find() is similar to registering a MemoryListener and checking for the MemoryRegionSections that come from a particular region. There is no reason for this to be limited to a root memory region. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-05-24memory: assert that PhysPageEntry's ptr does not overflowPaolo Bonzini1-0/+6
While sized to 15 bits in PhysPageEntry, the ptr field is ORed into the iotlb entries together with a page-aligned pointer. The ptr field must not overflow into this page-aligned value, assert that it is smaller than the page size. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-05-24exec: eliminate stq_phys_notdirtyPaolo Bonzini3-29/+0
It is not used anywhere. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-05-24exec: make qemu_get_ram_ptr privatePaolo Bonzini2-2/+1
It is a private interface between exec.c and memory.c. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-05-24exec: eliminate qemu_put_ram_ptrPaolo Bonzini5-15/+0
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-05-24exec: remove obsolete commentPaolo Bonzini1-6/+0
See how we call memory_region_section_addr two lines below to convert a physical address to a base address in the region. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-05-24rtl8139: flush queued packets when RxBufPtr is writtenStefan Hajnoczi1-0/+3
Net queues support efficient "receive disable". For example, tap's file descriptor will not be polled while its peer has receive disabled. This saves CPU cycles for needlessly copying and then dropping packets which the peer cannot receive. rtl8139 is missing the qemu_flush_queued_packets() call that wakes the queue up when receive becomes possible again. As a result, the Windows 7 guest driver reaches a state where the rtl8139 cannot receive packets. The driver has actually refilled the receive buffer but we never resume reception. The bug can be reproduced by running a large FTP 'get' inside a Windows 7 guest: $ qemu -netdev tap,id=tap0,... -device rtl8139,netdev=tap0 The Linux guest driver does not trigger the bug, probably due to a different buffer management strategy. Reported-by: Oliver Francke <oliver.francke@filoo.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-05-24net: support for bridged networking on Mac OS XAlasdair McLeay1-1/+2
tun tap can be implemented on Mac OS X using http://tuntaposx.sourceforge.net It behaves in the same way as FreeBSD/OpenBSD implementations, but Qemu needs a patch to use the OpenBS/FreeBSD code. As per the patch listed in this forum thread: http://forum.gns3.net/post17679.html#p17679 And also as used in the MacPorts installation: https://trac.macports.org/browser/trunk/dports/emulators/qemu/files/patch-net-tap-interface.diff Signed-off-by: Alasdair McLeay <alasdair.mcleay@me.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-05-24coroutine: stop using AioContext in CoQueueStefan Hajnoczi4-36/+29
qemu_co_queue_next(&queue) arranges that the next queued coroutine is run at a later point in time. This deferred restart is useful because the caller may not want to transfer control yet. This behavior was implemented using QEMUBH in the past, which meant that CoQueue (and hence CoMutex and CoRwlock) had a dependency on the AioContext event loop. This hidden dependency causes trouble when we move to a world with multiple event loops - now qemu_co_queue_next() needs to know which event loop to schedule the QEMUBH in. After pondering how to stash AioContext I realized the best solution is to not use AioContext at all. This patch implements the deferred restart behavior purely in terms of coroutines and no longer uses QEMUBH. Here is how it works: Each Coroutine has a wakeup queue that starts out empty. When qemu_co_queue_next() is called, the next coroutine is added to our wakeup queue. The wakeup queue is processed when we yield or terminate. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-05-24coroutine: protect global pool with a mutexStefan Hajnoczi1-2/+18
The coroutine freelist is a global pool of unused coroutines. It avoids the setup/teardown overhead associated with the coroutine lifecycle. Since the pool is global, we need to synchronize access so that coroutines can be used outside the BQL. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-05-24qemu-iotests: Try creating huge qcow2 imageKevin Wolf4-1/+70
It's supposed to fail gracefully instead of segfaulting. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-05-24qcow2.py: Subcommand for changing header fieldsKevin Wolf1-0/+17
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-05-24qemu-io: Fix 'map' outputKevin Wolf1-5/+41
The output of the 'map' command in qemu-io used to directly resemble bdrv_is_allocated() and could contain many lines for small chunks that all have the same allocation status. After this patch, they will be coalesced into a single output line for a large chunk. As a side effect, the command gains some error handling. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-05-24blockdev: Rename BlockdevAction -> TransactionActionKevin Wolf2-22/+21
There's no reason to restrict transactions to operations related to block devices, so rename the type now before schema introspection stops us from doing so. Also change the schema documentation of 'transaction' to not refer to block devices or snapshots any more. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-05-24block: make all steps in qmp_transaction() as callbackWenchao Xia1-24/+71
Make it easier to add other operations to qmp_transaction() by using callbacks, with external snapshots serving as an example implementation of the callbacks. Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-05-24block: package rollback code in qmp_transaction()Wenchao Xia1-3/+8
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-05-24block: package committing code in qmp_transaction()Wenchao Xia1-7/+12
The code is simply moved into a separate function. Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-05-24block: move input parsing code in qmp_transaction()Wenchao Xia1-19/+19
The code is moved into preparation function, and changed a bit to tip more clearly what it is doing. Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-05-24block: package preparation code in qmp_transaction()Wenchao Xia1-62/+77
The code before really committing is moved into a function. Most code is simply moved from qmp_transaction(), except that on fail it just returns now. Other code such as input parsing is not touched, to make it easier in review. Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-05-23Merge remote-tracking branch 'luiz/queue/qmp' into stagingAnthony Liguori12-57/+1278
# By Michael Roth (10) and others # Via Luiz Capitulino * luiz/queue/qmp: monitor: allow to disable the default monitor ui/input.c: replace magic numbers with macros qapi: add native list coverage for QMP input visitor tests qapi: add native list coverage for QMP output visitor tests qapi: add native list coverage for visitor serialization tests qapi: fix visitor serialization tests for numbers/doubles qapi: add QMP input test for large integers json-parser: fix handling of large whole number values qapi: enable generation of native list code qapi: qapi-visit.py, native list support qapi: qapi-visit.py, fix list handling for union types qapi: qapi-types.py, native list support Message-id: 1369333232-24145-1-git-send-email-lcapitulino@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-23monitor: allow to disable the default monitorLuiz Capitulino2-1/+4
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-05-23ui/input.c: replace magic numbers with macrosAmos Kong1-6/+7
It's clearer to use defined macros than magic numbers. Signed-off-by: Amos Kong <akong@redhat.com> Reviewed-by: Lei Li <lilei@linux.vnet.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-05-23qapi: add native list coverage for QMP input visitor testsMichael Roth1-0/+338
This exercises schema-generated visitors for native list types and does some sanity checking on validity of deserialized data. Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Amos Kong <akong@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
generated by cgit v1.2.1 (git 2.18.0) at 2024-07-01 10:41:04 +0000