summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2013-12-17target-arm: Add minimal KVM AArch64 supportMian M. Hamayun3-0/+209
Add the bare minimum set of functions needed for control of an AArch64 KVM vcpu: * CPU initialization * minimal get/put register functions which only handle the basic state of the CPU Signed-off-by: Mian M. Hamayun <m.hamayun@virtualopensystems.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1385645602-18662-4-git-send-email-peter.maydell@linaro.org [PMM: significantly overhauled; most notably: * code lives in kvm64.c rather than using #ifdefs * support '-cpu host' rather than implicitly using whatever the host's CPU is regardless of what the user requests * fix bug attempting to get/set nonexistent X[31] * fix bug writing 64 bit kernel pstate into uint32_t env field ] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2013-12-17target-arm: Clean up handling of AArch64 PSTATEPeter Maydell5-20/+78
The env->pstate field is a little odd since it doesn't strictly speaking represent an architectural register. However it's convenient for QEMU to use it to hold the various PSTATE architectural bits in the same format the architecture specifies for SPSR registers (since this is the same format the kernel uses for signal handlers and the KVM register). Add some structure to how we deal with it: * document what env->pstate is * add some #defines for various bits in it * add helpers for reading/writing it taking account of caching of NZCV, and use them where appropriate * reset it on startup Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1385645602-18662-3-git-send-email-peter.maydell@linaro.org Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2013-12-17target-arm/kvm: Split 32 bit only code into its own filePeter Maydell3-491/+516
Split ARM KVM support code which is 32 bit specific out into its own file, which we only compile on 32 bit hosts. This will give us a place to add the 64 bit support code without adding lots of ifdefs to kvm.c. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1385645602-18662-2-git-send-email-peter.maydell@linaro.org Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2013-12-17ARM: arm_cpu_reset: make it possible to use high vectors for reset_excAntony Pavlov1-0/+5
If hivecs are being used on reset, the CPU should come out of reset at the hivecs reset vector (0xFFFF0000) Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 3afc69c4f58f60aa2bbee7b91574a4eb414b1c23.1387160489.git.peter.crosthwaite@xilinx.com [ PC Changes: * Fixed Grammar error in commit message * Elaborated commit message. ] Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17ARM: cpu: add "reset_hivecs" propertyAntony Pavlov2-0/+14
Add an ARM CPU property for the reset value of hivecs as it is a board/SoC configurable setting. The existence of the property is conditional on the ARM CPU not being M class. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: b04216c6bda4bd163f44a55bba552d0e8267481f.1387160489.git.peter.crosthwaite@xilinx.com [ PC Changes: * Elaborated commit message * refactored to use qdev_property_add_static ] Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17arm/highbank.c: Fix MPCore periphbase namePeter Crosthwaite1-7/+8
GIC_BASE_ADDR is not the base address of the GIC. Its clear from the code that this is the base address of the MPCore. Rename to MPCORE_PERIPHBASE accordingly. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 90798bd3507205c16238b8b19a1a58c5437cf7ca.1387160489.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17arm/xilinx_zynq: Implement CBAR initialisationPeter Crosthwaite1-1/+8
Fix the CBAR initialisation by using the newly defined static property. Zynq will now correctly init the CBAR to the SCU base address. Needed to boot Linux on the xilinx_zynq machine model. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 8db7d57ebe5418fed397fcc86ea719f98446c178.1387160489.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17arm/xilinx_zynq: Use object_new() rather than cpu_arm_init()Peter Crosthwaite1-3/+9
To allow the machine model to set device properties before CPU realization. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: e57658b4506b26ab6b6fadbe6d7827f669f51895.1387160489.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17arm/highbank: Fix CBAR initialisationPeter Crosthwaite1-3/+5
Fix the CBAR initialisation by using the newly defined static property. CBAR is now set before realization, so the intended value is now actually used. So I have kind of tested this. I booted an ARM kernel on Highbank with the stock Highbank DTB. It doesn't boot (and I will be doing something wrong), but before this patch I got this: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at /workspaces/pcrost/public/linux2.git/arch/arm/mm/ioremap.c:301 __arm_ioremap_pfn_caller+0x180/0x198() CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 3.13.0-rc1-next-20131126-dirty #2 [<c0015164>] (unwind_backtrace) from [<c00118c0>] (show_stack+0x10/0x14) [<c00118c0>] (show_stack) from [<c02bd5fc>] (dump_stack+0x78/0x90) [<c02bd5fc>] (dump_stack) from [<c001f110>] (warn_slowpath_common+0x68/0x84) [<c001f110>] (warn_slowpath_common) from [<c001f1f4>] (warn_slowpath_null+0x1c/0x24) [<c001f1f4>] (warn_slowpath_null) from [<c0017c6c>] (__arm_ioremap_pfn_caller+0x180/0x198) [<c0017c6c>] (__arm_ioremap_pfn_caller) from [<c0017cd8>] (__arm_ioremap_caller+0x54/0x5c) [<c0017cd8>] (__arm_ioremap_caller) from [<c0017d10>] (__arm_ioremap+0x18/0x1c) [<c0017d10>] (__arm_ioremap) from [<c03913c0>] (highbank_init_irq+0x34/0x8c) [<c03913c0>] (highbank_init_irq) from [<c038c228>] (init_IRQ+0x28/0x2c) [<c038c228>] (init_IRQ) from [<c03899ec>] (start_kernel+0x234/0x398) [<c03899ec>] (start_kernel) from [<00008074>] (0x8074) ---[ end trace 3406ff24bd97382f ]--- Which disappears with this patch. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: fedec366aaa512d75093635f523d1dbcb3358361.1387160489.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17arm/highbank: Use object_new() rather than cpu_arm_init()Peter Crosthwaite1-3/+9
To allow the machine model to set device properties before CPU realization. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 8c671e500390c8be0cc363e887e32867d1d1b0d2.1387160489.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17target-arm/cpu: Convert reset CBAR to a propertyPeter Crosthwaite1-0/+17
The reset value of the CP15 CBAR is a vendor (machine) configurable property. If ARM_FEATURE_CBAR is set, add it as a property at post_init time. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 2f1eec3f912135deea6252360e03645003d12e0a.1387160489.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17target-arm: Define and use ARM_FEATURE_CBARPeter Crosthwaite3-9/+13
Some processors (notably A9 within Highbank) define and use the CP15 configuration base address (CBAR). This is vendor specific so its best implemented as a CPU property (otherwise we would need vendor specific child classes for every ARM implementation). This patch prepares support for converting CBAR reset value to a CPU property by moving the CP registration out of the CPU init fn, as registration will need to happen at realize time to pick up any property updates. The easiest way to do this is via definition of a new ARM_FEATURE to flag the existence of the register. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 9f697ef1e2ee60a3b9ef971a7f3bc3fa6752a9b7.1387160489.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17target-arm/helper.c: Allow cp15.c15 dummy overridePeter Crosthwaite1-1/+2
The cp15.c15 space is implementation defined. Currently there is a dummy placeholder register RAZing it. Allow overriding of this RAZ so implementations of specific registers can take precedence. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: ed1bacec56dae00cb398c798f8240e8e685f949c.1387160489.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17Fix NOR flash device ID readingRoy Franz2-23/+88
Fix NOR flash manufacturer and device ID reading. This now properly takes into account device widths and device max widths as required. The reading of these IDs uses the same max_width dependent addressing as CFI queries. The old code remains for chips that don't specify a device width, as the new code relies on a device width being set in order to properly operate. The existing code seems very broken. Only ident0 and ident1 are used in the new code, as other fields relate to the lock state of blocks in flash. The VExpress flash configuration has been updated to match the new code, as the existing definition was 'wrong' in order to return the expected results with the broken device ID code. Signed-off-by: Roy Franz <roy.franz@linaro.org> Message-id: 1386279359-32286-8-git-send-email-roy.franz@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17Fix CFI query responses for NOR flashRoy Franz1-11/+94
This change fixes the CFI query responses to handle NOR device widths that are different from the bank width. Support is also added for multi-width devices in a x8 configuration. This is typically x8/x16 devices, but the CFI specification mentions x8/x32 devices so those should be supported as well if they exist. The query response data is now replicated per-device in the bank, and is adjusted for x16 or x32 parts configured in x8 mode. The existing code is left in place for boards that have not been updated to specify an explicit device_width. The VExpress board has been updated in an earlier patch in this series so this is the only board currently affected. Signed-off-by: Roy Franz <roy.franz@linaro.org> Message-id: 1386279359-32286-7-git-send-email-roy.franz@linaro.org [PMM: fixed a few formatting nits] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17Add max device width parameter for NOR devicesRoy Franz1-0/+25
For handling CFI and device ID reads, we need to not only know the width that a NOR flash device is configured for, but also its maximum width. The maximum width addressing mode is used for multi-width parts no matter which width they are configured for. The most common case is x16 parts that also support x8 mode. When configured for x8 operation these devices respond to CFI and device ID requests differently than native x8 NOR parts. Signed-off-by: Roy Franz <roy.franz@linaro.org> Message-id: 1386279359-32286-6-git-send-email-roy.franz@linaro.org [PMM: Added comment explaining the semantics of width vs device-width vs max-device-width] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17Set proper device-width for vexpress flashRoy Franz1-10/+34
Create vexpress specific pflash registration function which properly configures the device-width of 16 bits (2 bytes) for the NOR flash on the vexpress platform. This change is required for buffered flash writes to work properly. Signed-off-by: Roy Franz <roy.franz@linaro.org> Message-id: 1386279359-32286-5-git-send-email-roy.franz@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17return status for each NOR flash deviceRoy Franz1-2/+13
Now that we know how wide each flash device that makes up the bank is, return status for each device in the bank. Leave existing code that treats 32 bit wide banks as composed of two 16 bit devices as otherwise we may break configurations that do not set the device_width propery. Signed-off-by: Roy Franz <roy.franz@linaro.org> Message-id: 1386279359-32286-4-git-send-email-roy.franz@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17Add device-width property to pflash_cfi01Roy Franz1-0/+11
The width of the devices that make up the flash interface is required to mask certain commands, in particular the write length for buffered writes. This length will be presented to each device on the interface by the program writing the flash, and the flash emulation code needs to be able to determine the length of the write as recieved by each flash device. The device-width defaults to the bank width which should maintain existing behavior for platforms that don't need this change. This change is required to support buffered writes on the vexpress platform that has a 32 bit flash interface with 2 16 bit devices on it. Signed-off-by: Roy Franz <roy.franz@linaro.org> Message-id: 1386279359-32286-3-git-send-email-roy.franz@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17rename pflash_t member width to bank_widthRoy Franz1-8/+9
Rename the 'width' member of the pflash_t structure in preparation for adding a bank_width member. Signed-off-by: Roy Franz <roy.franz@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1386279359-32286-2-git-send-email-roy.franz@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17target-arm: add support for v8 AES instructionsArd Biesheuvel6-0/+313
This adds support for the AESE/AESD/AESMC/AESIMC instructions that are available on some v8 implementations of Aarch32. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Message-id: 1386266078-6976-1-git-send-email-ard.biesheuvel@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-16qemu_opts_parse(): always check return valueLaszlo Ersek1-1/+6
qemu_opts_parse() can always return NULL, even if the QemuOptsList.desc in question would be trivial to satisfy (eg. because it's empty). For example: qemu_opts_parse() opts_parse() qemu_opts_create() id_wellformed() In practice: $ .../qemu-system-x86_64 -acpitable id=3 qemu-system-x86_64: -acpitable id=3: Parameter 'id' expects an identifier ** ERROR:vl.c:3491:main: assertion failed: (opts != NULL) Aborted (core dumped) $ .../qemu-system-x86_64 -smbios id=3 qemu-system-x86_64: -smbios id=3: Parameter 'id' expects an identifier Segmentation fault (core dumped) I checked all qemu_opts_parse() invocations (and all drive_def() invocations too, because it blindly forwards the former's retval). Only the two above examples look problematic. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-id: 1385658779-7529-1-git-send-email-lersek@redhat.com Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-12-16Merge remote-tracking branch 'spice/tags/pull-spice-1' into stagingAnthony Liguori16-377/+537
Collection of little cleanups anf bugfixes. nbd patches in preparation of spice-nbd. # gpg: Signature made Mon 16 Dec 2013 01:27:45 AM PST using RSA key ID D3E87138 # gpg: Can't check signature: public key not found # By Marc-André Lureau (12) and Gerd Hoffmann (4) # Via Gerd Hoffmann * spice/tags/pull-spice-1: spice: stop server for qxl hard reset spice: move spice_server_vm_{start,stop} calls into qemu_spice_display_*() spice: move qemu_spice_display_*() from spice-graphics to spice-core nbd: avoid uninitialized warnings nbd: finish any pending coroutine nbd: make nbd_client_session_close() idempotent nbd: pass export name as init argument nbd: don't change socket block during negotiate Split nbd block client code spice-char: implement chardev port event char: add qemu_chr_fe_event() include: add missing config-host.h include qmp_change_blockdev() remove unused has_format spice-char: remove unused field vscclient: do not add a socket watch if there is not data to send spice: flip streaming video mode to off by default
2013-12-16Merge remote-tracking branch 'kwolf/tags/for-anthony' into stagingAnthony Liguori6-34/+58
Block patches # gpg: Signature made Fri 13 Dec 2013 09:47:03 AM PST using RSA key ID C88F2FD6 # gpg: Can't check signature: public key not found # By Peter Lieven (2) and others # Via Kevin Wolf * kwolf/tags/for-anthony: blkdebug: Use QLIST_FOREACH_SAFE to resume IO qemu-img: make progress output more accurate during convert block: expect get_block_status errors in bdrv_make_zero block/vvfat: Fix compiler warnings for OpenBSD qapi-schema.json: Change 1.8 reference to 2.0 sheepdog: check if '-o redundancy' is passed from user Message-id: 1386956943-19474-1-git-send-email-kwolf@redhat.com Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-12-16spice: stop server for qxl hard resetGerd Hoffmann1-0/+10
Hard reset can happen at any time. We should be able to put qxl into a known-good state no matter what. Stop spice server thread for reset so it can't be confused by fetching stale commands lingering around in the rings while we reset is ongoing. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-16spice: move spice_server_vm_{start,stop} calls into qemu_spice_display_*()Gerd Hoffmann1-2/+2
So calling spice server to start/stop the worker goes hand in hand with the status variable update. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-16spice: move qemu_spice_display_*() from spice-graphics to spice-coreGerd Hoffmann2-17/+16
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-16nbd: avoid uninitialized warningsMarc-André Lureau1-12/+9
==15815== Thread 1: ==15815== Syscall param socketcall.sendto(msg) points to uninitialised byte(s) ==15815== at 0x65AD5CB: send (send.c:31) ==15815== by 0x37F84B: nbd_wr_sync (nbd.c:145) ==15815== by 0x37F94B: write_sync (nbd.c:186) ==15815== by 0x380FA9: nbd_send_request (nbd.c:681) ==15815== by 0x1C4A2D: nbd_teardown_connection (nbd-client.c:337) ==15815== by 0x1C4AD8: nbd_client_session_close (nbd-client.c:354) ==15815== by 0x1ED2D8: close_socketpair (spicebd.c:132) ==15815== by 0x1EE265: spice_close (spicebd.c:457) ==15815== by 0x1ACBF6: bdrv_close (block.c:1519) ==15815== by 0x1AD804: bdrv_delete (block.c:1772) ==15815== by 0x1B4136: bdrv_unref (block.c:4476) ==15815== by 0x1ACCE0: bdrv_close (block.c:1541) ==15815== Address 0x7feffef98 is on thread 1's stack Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-16nbd: finish any pending coroutineMarc-André Lureau1-5/+16
Make sure all pending coroutines are finished when closing the session. Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-16nbd: make nbd_client_session_close() idempotentMarc-André Lureau1-0/+5
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-16nbd: pass export name as init argumentMarc-André Lureau3-13/+14
There is no need to keep the export name around, and it seems a better fit as an argument in the init() call. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-16nbd: don't change socket block during negotiateMarc-André Lureau2-2/+1
The caller might handle non-blocking using coroutine. Leave the choice to the caller to use a blocking or non-blocking negotiate. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-16Split nbd block client codeMarc-André Lureau4-346/+452
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-16spice-char: implement chardev port eventMarc-André Lureau1-0/+10
Wire up chardev fe_event to Spice port. Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-16char: add qemu_chr_fe_event()Marc-André Lureau2-0/+17
Teach the chardev frontend to send event. This is used by the Spice port chardev currently. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-16include: add missing config-host.h includeMarc-André Lureau1-0/+2
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-16qmp_change_blockdev() remove unused has_formatMarc-André Lureau3-3/+3
Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-16spice-char: remove unused fieldMarc-André Lureau1-1/+0
Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-16vscclient: do not add a socket watch if there is not data to sendMarc-André Lureau1-4/+6
Fixes the following error: ** (process:780): CRITICAL **: do_socket_send: assertion `socket_to_send->len != 0' failed Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-16spice: flip streaming video mode to off by defaultGerd Hoffmann1-0/+2
Video streaming detection heuristics in spice-server have problems keeping modern desktop animations (as done by gnome shell) and real video playback apart. This leads to jpeg compression artefacts on your desktop, due to spice using mjpeg to send what it thinks is a video stream. Turn off video detection by default to avoid these artifacts. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Alon Levy <alevy@redhat.com>
2013-12-13Merge remote-tracking branch 'bonzini/virtio' into stagingAnthony Liguori22-334/+413
# By Andreas Färber (18) and Paolo Bonzini (12) # Via Paolo Bonzini * bonzini/virtio: (30 commits) virtio: Convert exit to unrealize virtio: Complete converting VirtioDevice to QOM realize virtio-scsi: Convert to QOM realize virtio-rng: Convert to QOM realize virtio-balloon: Convert to QOM realize virtio-net: Convert to QOM realize virtio-serial: Convert to QOM realize virtio-blk: Convert to QOM realize virtio-9p: Convert to QOM realize virtio: Start converting VirtioDevice to QOM realize virtio-scsi: QOM realize preparations virtio-rng: QOM realize preparations virtio-balloon: QOM realize preparations virtio-net: QOM realize preparations virtio-serial: QOM realize preparations virtio-blk: QOM realize preparations virtio-9p: QOM realize preparations virtio-blk-dataplane: Improve error reporting virtio-pci: add device_unplugged callback virtio-rng: switch exit callback to VirtioDeviceClass ...
2013-12-13Merge remote-tracking branch 'mst/tags/for_anthony' into stagingAnthony Liguori30-275/+798
acpi.pci,pc,memory core fixes Most notably this includes changes to exec to support full 64 bit addresses. This also flushes out patches that got queued during 1.7 freeze. There are new tests, and a bunch of bug fixes all over the place. There are also some changes mostly useful for downstreams. I'm also listing myself as pc co-maintainer. I'm doing this reluctantly, but this seems to be necessary to make sure patches are not lost or delayed too much, and posting the MAINTAINERS patch did not seem to make anyone else volunteer. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Wed 11 Dec 2013 10:21:51 AM PST using RSA key ID D28D5469 # gpg: Can't check signature: public key not found # By Michael S. Tsirkin (14) and others # Via Michael S. Tsirkin * mst/tags/for_anthony: (28 commits) pc: use macro for HPET type hpet: fix build with CONFIG_HPET off acpi unit-test: adjust the test data structure for better handling acpi unit-test: load and check facs table exec: separate sections and nodes per address space memory.c: bugfix - ref counting mismatch in memory_region_find hpet: enable to entitle more irq pins for hpet hpet: inverse polarity when pin above ISA_NUM_IRQS pci: fix pci bridge fw path ACPI DSDT: Make control method `IQCR` serialized acpi: strip compiler info in built-in DSDT acpi unit-test: verify signature and checksum smbios: Set system manufacturer, product & version by default exec: reduce L2_PAGE_SIZE exec: make address spaces 64-bit wide exec: memory radix tree page level compression exec: pass hw address to phys_page_find exec: extend skip field to 6 bit, page entry to 32 bit exec: replace leaf with skip split definitions for exec.c and translate-all.c radix trees ... Message-id: cover.1386786228.git.mst@redhat.com Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-12-13Merge remote-tracking branch 'bonzini/scsi-next' into stagingAnthony Liguori5-309/+143
# By Paolo Bonzini (4) and Peter Lieven (1) # Via Paolo Bonzini * bonzini/scsi-next: help: add id suboption to -iscsi scsi-disk: fix WRITE SAME with large non-zero payload block/iscsi: introduce bdrv_co_{readv, writev, flush_to_disk} scsi-disk: fix VERIFY emulation scsi-bus: fix transfer length and direction for VERIFY command Message-id: 1386594157-17535-1-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-12-13blkdebug: Use QLIST_FOREACH_SAFE to resume IOFam Zheng1-4/+4
Qemu-iotest 030 was broken. When the coroutine runs and finishes, it will remove itself from the req list, so let's use safe version of foreach to avoid use after free. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-12-13qemu-img: make progress output more accurate during convertPeter Lieven1-5/+21
the progress output is very bumpy if the input images contains a significant portion of unallocated sectors. This patch checks how much sectors are allocated a priori if progress output is selected. Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-12-13block: expect get_block_status errors in bdrv_make_zeroPeter Lieven1-0/+5
during testing around with 4k LUNs a bad target implementation triggert an -EIO in iscsi_get_block_status, but it got never caught resulting in an infinite loop. CC: qemu-stable@nongnu.org Signed-off-by: Peter Lieven <pl@kamp.de> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-12-13block/vvfat: Fix compiler warnings for OpenBSDStefan Weil1-21/+22
The buildbot shows these compiler warnings: block/vvfat.c: In function 'create_short_and_long_name': block/vvfat.c:620: warning: array size (8) smaller than bound length (11) block/vvfat.c:620: warning: array size (8) smaller than bound length (11) block/vvfat.c:635: warning: array size (8) smaller than bound length (11) block/vvfat.c:635: warning: array size (8) smaller than bound length (11) They are caused by tricky code where 8 characters for the name are followed by 3 characters for the extension, and some operations touch both name and extension. Using an 11 character name which includes the extension fixes the compiler warning, satisfies cppcheck, valgrind and maybe other static and dynamic code checkers, and even simplifies some parts of the code. Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-12-13qapi-schema.json: Change 1.8 reference to 2.0Kevin Wolf1-1/+1
Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-12-13sheepdog: check if '-o redundancy' is passed from userLiu Yuan1-3/+5
This fix a segfault (that is caused by b3af018f3) of following command: $ qemu-img convert some_img sheepdog:some_img Cc: qemu-devel@nongnu.org Cc: Kevin Wolf <kwolf@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Liu Yuan <namei.unix@gmail.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-12-13target-microblaze: Use the new qemu_ld/st opcodesRichard Henderson1-104/+35
The ability of the new opcodes to byte-swap the memory operation simplifies the code in and around dec_load and dec_store significantly. Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> Tested-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
generated by cgit v1.2.1 (git 2.18.0) at 2024-06-29 15:21:22 +0000