summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2013-03-01virtio-9p: use CONFIG_VIRTFS, not CONFIG_LINUXPaolo Bonzini2-3/+3
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-01hw: move device-hotplug.o to toplevel, compile it oncePaolo Bonzini5-13/+14
The situation with device-hotplug.c is similar to qdev-monitor.c. Add a stub for pci_drive_hot_add, so that it can be compiled once, and move it out of hw/. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-01hw: move qdev-monitor.o to toplevel directoryPaolo Bonzini23-8/+25
qdev-monitor.c is the only "core qdev" file that is not used in user-mode emulation, and it does not define anything that is used by hardware models. Remove it from the hw/ directory and remove hw/qdev-monitor.h from hw/qdev.h too; this requires some files to have some new explicitly includes. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-01hw: move fifo.[ch] to libqemuutilPaolo Bonzini7-5/+8
fifo.c is generic code that can be easily unit tested. So it belongs in libqemuutil. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-01hw: move char backends to backends/Paolo Bonzini8-9/+11
Braille and msmouse support is in hw/, but it is not hardware. Move it to the backends/ directory. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-02-28cadence_gem: Add debug msgs for rx desc movementPeter Crosthwaite1-0/+2
Add some helpful messages that show the rx descriptor pointer moving as packets are rxed. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1ef2eb34dade64d589a69a2bcfd5aaddb7d50164.1360901435.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-28cadence_gem: Don't reset rx desc pointer on rx_enPeter Crosthwaite1-4/+0
This doesn't happen in the real hardware. The Zynq TRM explicitly states that this bit has no effect on the rx descriptor pointer ("The receive queue pointer register is unaffected"). Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 06fdf92b78ee62d8965779bafd29c8df1a5d2718.1360901435.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-28cadence_gem: fix interrupt eventsPeter Crosthwaite1-23/+4
Bits in the ISR were continually mirroring their corresponding TX/RX SR bits. This is incorrect. The ISR bits are only ever set at the time their corresponding event occurs. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: cedfb6d108318846480b416a6041023ea5a353d6.1360901435.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-28cadence_gem: factor out can_rx() logic replicationPeter Crosthwaite1-1/+1
The gem_receive() function replicates the logic for whether or not the device can rx. Just call the actual gem_can_receive() function in place. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: bf7f93969f3e01fbc76d68d2955307fdbad11bb1.1360901435.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-28cadence_gem: Flush queued packetsPeter Crosthwaite1-0/+3
The device needs to check for queued RX packets when the RX path is re-enabled. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1fa8c88a3b7c654886d0a7484c2463cd4c2a2781.1360901435.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-28m25p80.c: Use QOM classes for part differentiationPeter Crosthwaite3-31/+33
Currently, M25P80 uses an object property to differentiate between flash parts. Changed this over to use QOM sub-classes - the actual names of the different parts are used to create a set of dynamic classes which passes the part info as class data. The object no longer needs to search the known_devices table for itself, instead it just gets its info from its own class. Kept the intermediate class definition private to m25p80.c for the moment, as the expectation is parts will only be added as new entries in the table. We can factor out the TYPE_M25P80 abstraction into a header on a demand basis. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: e24e156d-ff96-4901-997a-e31178b08bee@VA3EHSMHS021.ehs.local Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-28xilinx_zynq: Added SD controllersPeter Crosthwaite1-0/+10
The Xilinx Zynq device has two SDHCI controllers. Added to the machine model. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-28vl.c: allow for repeated -sd argumentsPeter Crosthwaite1-1/+1
Allows for repeating of -sd arguments in the same way as -pflash and -mtdblock. Acked-by: Igor Mitsyanko <i.mitsyanko@samsung.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-28hw/sdhci: introduce standard SD host controllerIgor Mitsyanko4-0/+1615
Device model for standard SD Host Controller Interface (SDHCI) compliant with version 2.00 of SD association specification. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Igor Mitsyanko <i.mitsyanko@samsung.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-28arm: a9mpcore: Coreify the SCUPeter Crosthwaite3-113/+174
Split the SCU in a9mpcore out into its own object definition. mpcore is now just a container for the mpcore components. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-28arm: a9mpcore: remove old_timer_status fieldPeter Crosthwaite1-8/+3
This field was write only and thus unused. Removed. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-28arm: mptimer: Remove WDT distinctionPeter Crosthwaite3-64/+41
In QEMU emulation, there is no functional difference between the ARM mpcore private timers and watchdogs. Removed all the distinction between the two from arm_mptimer.c and converted it to be just the mptimer. a9mpcore and arm11mpcore just instantiate the same mptimer object twice to get both timer and WDT. If in the future we want to make the WDT functionally different then we can use either QOM hierarchy to derive WDT from from mptimer, or we can add a property "is-wdt" or some such. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-28arm: arm11mpcore, a9mpcore: CamelCased type namesPeter Crosthwaite2-23/+23
To conform with QEMU coding style. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-28arm: mptimer: CamelCased type namesPeter Crosthwaite1-28/+28
Trivial find replace on type names "timerblock" and "arm_mptimer_state" to conform with QEMU coding style. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-28hw/pflash_cfi01: Treat read in unknown command state as readPeter Maydell1-5/+6
The code for handling the default "unknown command state" case in pflash_read in pflash_cfi01.c comments "reset state & treat it as a read". However the code doesn't actually do this. Moving the default case to the top of the switch so it can fall through into the read case brings this file into line with pflash_cfi02 and makes the code behave as the comments suggest. The pflash_cfi01 code has always had this bug -- it was presumably introduced when the original author copied the cfi02 code and rearranged the order of the switch statement without noticing that the default case relied on the fall-through. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Tested-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1358777318-7579-3-git-send-email-peter.maydell@linaro.org
2013-02-28hw/pflash_cfi01: Make read after byte-write or erase return statusPeter Maydell1-0/+3
The Intel flash command set requires that a read operation after doing a 'single byte write' command returns the status register; add this case to pflash_read() so we return the correct information. Similarly, the case for the 0x28 flavour of block erase was missing. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Tested-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1358777318-7579-2-git-send-email-peter.maydell@linaro.org
2013-02-28hw/ds1338: Fix conversion between 12 hours and 24 hours modes.Antoine Mathys1-4/+4
The proper mapping between 24 hours and 12 hours modes is: 0 12 AM 1-11 1-11 AM 12 12 PM 13-23 1-11 PM Fix code accordingly. Signed-off-by: Antoine Mathys <barsamin@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-27target-i386: Use mulu2 and muls2Richard Henderson3-155/+56
These correspond very closely to the insns that we're emulating. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-26Merge remote-tracking branch 'kiszka/queues/slirp' into stagingAnthony Liguori1-0/+1
# By Jan Kiszka # Via Jan Kiszka * kiszka/queues/slirp: slirp: Properly initialize pollfds_idx of new sockets
2013-02-26glib: Add compat wrapper for g_poll on old glibAlexander Graf1-0/+12
Older glib doesn't implement g_poll(). Most notably the glib version in use on SLE11 is on 2.18 which is hit by this. We do want to use g_poll() in the source however. So on older systems, just wrap it with functions that do exist on older versions. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de> Message-id: 1361835970-2889-1-git-send-email-agraf@suse.de Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-26qemu-log: default to stderr for logging outputPeter Maydell8-53/+42
Switch the default for qemu_log logging output from "/tmp/qemu.log" to stderr. This is an incompatible change in some sense, but logging is mostly used for debugging purposes so it shouldn't affect production use. The previous behaviour can be obtained by adding "-D /tmp/qemu.log" to the command line. This change requires us to: * update all the documentation/help text (we take the opportunity to smooth out minor inconsistencies between the phrasing in linux-user/bsd-user/system help messages) * make linux-user and bsd-user defer to qemu-log for the default logging destination rather than overriding it themselves * ensure that all logfile closing is done via qemu_log_close() and that that function doesn't close stderr as well as the obvious change to the behaviour of do_qemu_set_log() when no logfile name has been specified. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-id: 1361901160-28729-1-git-send-email-peter.maydell@linaro.org Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-26show --disable-gtk and --enable-gtk in the help messageHu Tao1-0/+2
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Message-id: 1361759268-16314-1-git-send-email-hutao@cn.fujitsu.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-26Add compat for GDK_KEY_XXX symbolsDaniel P. Berrange1-0/+9
The GDK_KEY_XXX symbols are new in GTK3 and only the most recent GTK2 releases. Most versions of GTK2 have simply used GDK_XXX Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1361805646-6425-14-git-send-email-berrange@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-26Add compat macro for gtk_widget_get_realizedDaniel P. Berrange1-0/+5
The gtk_widget_get_realized method only arrived in GTK 2.20, so defined a compat macro for earlier GTK Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1361805646-6425-13-git-send-email-berrange@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-26Add support for enabling build with GTK3Daniel P. Berrange1-6/+19
Add a arg to configure to switch from GTK2 (default) to GTK3 (optional) build for QEMU. ./configure --with-gtkabi=3.0 will choose GTK3, while ./configure --with-gtkabi=2.0 will choose GTK2 (and remains the current default) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1361805646-6425-12-git-send-email-berrange@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-26Ensure x_keymap.o is built when GTK is enabledDaniel P. Berrange1-1/+1
The x_keymap.o file is required by both GTK and SDL builds, so it must be explicitly listed as a GTK dep to ensure the linker works when SDL is disabled Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1361805646-6425-11-git-send-email-berrange@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-26Replace expose-event handler with draw handler in GTK3Daniel P. Berrange1-0/+7
In GTK3 the 'expose-event' signal has been replaced by a new 'draw' signal. The only difference is that the latter will pre-create the cairo drawing context & set the clip mask. Since the drawing code is already structured in a nice way, we can just wire up the 'gd_draw_event' method to the 'draw' signal in GTK3 Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1361805646-6425-10-git-send-email-berrange@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-26Conditionalize use of gtk_widget_size_requestDaniel P. Berrange1-0/+4
The gtk_widget_size_request method has been replaced by the gtk_widget_get_preferred_size method in GTK3. Conditionally call the new method in GTK3 Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1361805646-6425-9-git-send-email-berrange@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-26Conditionalize use of gdk_display_warp_pointerDaniel P. Berrange1-1/+6
In GTK3 the gdk_display_warp_pointer method is deprecated. Instead we should use gdk_device_warp on the GdkDevice instead associated with the event being processed. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1361805646-6425-8-git-send-email-berrange@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-26Replace gtk_menu_append with gtk_menu_shell_appendDaniel P. Berrange1-20/+20
The gtk_menu_append method has long been deprecated in favour of the gtk_menu_shell_append method. The former is now entirely gone in GTK3, so switch all code to the latter which works on both GTK2 and GTK3 Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1361805646-6425-7-git-send-email-berrange@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-26Remove use of GtkVBox in GTK3Daniel P. Berrange1-0/+4
The GtkVBox class is deprecated, in favour of just using the GtkBox class directly. Eventually even GtkBox will be deprecated in favour of GtkGrid, but that is a bigger fix which can wait. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1361805646-6425-6-git-send-email-berrange@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-26Conditionalize use of gdk_pointer_grab / gdk_pointer_ungrabDaniel P. Berrange1-11/+65
On GTK3 there is support for multiple pointer devices, so rather than using gdk_pointer_grab / gdk_pointer_ungrab we should iterate over all devices, grabbing each one in turn Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1361805646-6425-5-git-send-email-berrange@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-26Conditionalize use of gdk_keyboard_grab / gdk_keyboard_ungrabDaniel P. Berrange1-1/+40
On GTK3 there is support for multiple keyboard devices, so rather than using gdk_keyboard_grab / gdk_keyboard_ungrab we should iterate over all devices, grabbing each one in turn Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1361805646-6425-4-git-send-email-berrange@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-26Remove use of gdk_drawable_get_{screen, display}Daniel P. Berrange1-3/+2
The gdk_drawable_get_screen and gdk_drawable_get_display methods don't exist in GDK3. Fortunately, even on GTK2 they are not required - we can call the equivalent gtk_widget_get_screen/gtk_widget_get_display methods which have existed since GTK 2.2 Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1361805646-6425-3-git-send-email-berrange@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-26Add compat for gdk_drawable_get_size on GTK3Daniel P. Berrange1-0/+10
GTK3 lacks the gdk_drawable_get_size method, so we create a stub impl which gets the get_width/get_height mehtods instead Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1361805646-6425-2-git-send-email-berrange@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-26gtk ui: unbreak spiceGerd Hoffmann1-3/+1
Merge of the gtk ui brought a initialitation order issue for spice: The using_spice variable isn't set yet when checked, leading to the default UI being activated (additionally to spice remote access). Let's set display_remote when we find a -spice switch on the command line, like we do for vnc. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 1361804550-15858-1-git-send-email-kraxel@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-26Merge remote-tracking branch 'kwolf/for-anthony' into stagingAnthony Liguori32-229/+1440
# By Paolo Bonzini (7) and others # Via Kevin Wolf * kwolf/for-anthony: (22 commits) pc: add compatibility machine types for 1.4 blockdev: enable discard by default qemu-nbd: add --discard option blockdev: add discard suboption to -drive block: implement BDRV_O_UNMAP block: complete all IOs before .bdrv_truncate coroutine: trim down nesting level in perf_nesting test coroutine: move pooling to common code qemu-iotests: Test qcow2 image creation options qemu-iotests: Add qemu-img compare test qemu-img: Add compare subcommand qemu-img: Add "Quiet mode" option block: Add synchronous wrapper for bdrv_co_is_allocated_above block: refuse negative iops and bps values block: use Error in do_check_io_limits() qcow2: support compressed clusters in BlockFragInfo qemu-img: add compressed clusters to BlockFragInfo qemu-img: fix missing space in qemu-img check output qcow2: record fragmentation statistics during check qcow2: introduce check_refcounts_l1/l2() flags ...
2013-02-26Merge remote-tracking branch 'quintela/stats.next' into stagingAnthony Liguori3-2/+15
# By Juan Quintela # Via Juan Quintela * quintela/stats.next: migration: calculate expected_downtime migration: don't account sleep time for calculating bandwidth migration: calculate end time after we have sent the data migration: change initial value of expected_downtime
2013-02-26Merge remote-tracking branch 'luiz/queue/qmp' into stagingAnthony Liguori1-0/+664
# By Markus Armbruster # Via Luiz Capitulino * luiz/queue/qmp: check-qjson: More thorough testing of UTF-8 in strings
2013-02-26slirp: Properly initialize pollfds_idx of new socketsJan Kiszka1-0/+1
Otherwise we may start processing sockets in slirp_pollfds_poll that were created past slirp_pollfds_fill. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-25target-ppc: Fix SUBFE carryRichard Henderson1-4/+5
While ~T0+T1+CF = T1-T0+CF-1 is true for the low 32-bits, it does not produce the correct carry-out to bit 33. Do exactly what the manual says. Cc: Alexander Graf <agraf@suse.de> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-25target-arm: Fix sbc_CC carryRichard Henderson1-24/+4
While T0+~T1+CF = T0-T1+CF-1 is true for the low 32-bits, it does not produce the correct carry-out to bit 33. Do exactly what the manual says. Using the ~T1 makes the add and subtract code paths nearly identical, so have sbc_CC use adc_CC. Cc: Peter Maydell <peter.maydell@linaro.org> Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-25arm/translate.c: Fix adc_CC/sbc_CC implementationPeter Crosthwaite1-2/+2
commits 49b4c31efcce45ab714f286f14fa5d5173f9069d and 2de68a4900ef6eb67380b0c128abfe1976bc66e8 reworked the implementation of adc_CC and sub_CC. The new implementations (on the TCG_TARGET_HAS_add2_i32 code path) are incorrect. The new logic is: CF:NF = 0:A +/- 0:CF CF:NF = CF:A +/- 0:B The lower 32 bits of the intermediate result stored in NF needs to be passes into the second addition in place of A (s/CF:A/CF:NF): CF:NF = 0:A +/- 0:CF CF:NF = CF:NF +/- 0:B This patch fixes the issue. Cc: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-23target-mips: fix for sign-issue in MULQ_W helperPetar Jovanovic3-3/+3
Correct sign-propagation before multiplication in MULQ_W helper. The change also fixes previously incorrect expected values in the tests for MULQ_RS.W and MULQ_S.W. Signed-off-by: Petar Jovanovic <petarj@mips.com> Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-02-23target-mips: fix for incorrect multiplication with MULQ_S.PHPetar Jovanovic2-1/+16
The change corrects sign-related issue with MULQ_S.PH. It also includes extension to the already existing test which will trigger the issue. Signed-off-by: Petar Jovanovic <petarj@mips.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
generated by cgit v1.2.1 (git 2.18.0) at 2024-06-30 18:33:00 +0000