summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2013-03-18console: zap displaystate from dcl callbacksGerd Hoffmann9-56/+23
Now that nobody depends on DisplayState in DisplayChangeListener callbacks any more we can remove the parameter from all callbacks. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-03-18cocoa: stop using DisplayStateGerd Hoffmann1-25/+10
Rework DisplayStateListener callbacks to not use the DisplayState any more. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-03-18spice: stop using DisplayStateGerd Hoffmann4-18/+20
Rework DisplayStateListener callbacks to not use the DisplayState any more. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-03-18sdl: stop using DisplayStateGerd Hoffmann1-41/+51
Rework DisplayStateListener callbacks to not use the DisplayState any more. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-03-18vnc: stop using DisplayStateGerd Hoffmann4-40/+48
Rework DisplayStateListener callbacks to not use the DisplayState any more. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-03-18gtk: stop using DisplayStateGerd Hoffmann1-60/+80
Rework DisplayStateListener callbacks to not use the DisplayState any more. Factor out the window size handling to a separate function, so the zoom callbacks can call that directly instead of abusing the gd_switch DisplayStateListener callback for that. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-03-18console: add surface_*() gettersGerd Hoffmann1-8/+38
Add convinence wrappers to query DisplaySurface properties. Simliar to ds_get_*, but operating in the DisplaySurface not the DisplayState. With this patch in place ui frontents can stop using DisplayState in the rendering code paths, they can simply operate using the DisplaySurface passed in via dpy_gfx_switch callback. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-03-18console: rework DisplaySurface handling [dcl/ui side]Gerd Hoffmann9-55/+43
Replace the dpy_gfx_resize and dpy_gfx_setdata DisplayChangeListener callbacks with a dpy_gfx_switch callback which notifies the ui code when the framebuffer backing storage changes. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-03-18console: rework DisplaySurface handling [vga emu side]Gerd Hoffmann8-84/+54
Decouple DisplaySurface allocation & deallocation from DisplayState. Replace dpy_gfx_resize + dpy_gfx_setdata with a dpy_gfx_replace_surface function. This handles the graphic hardware emulation. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-03-18sdl: drop dead codeGerd Hoffmann1-5/+0
DisplayAllocator removal (commit 187cd1d9f30d13f0d0ef682e4d91cfa3e4cbd472) made this a nop. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-03-18qxl: better vga init in enter_vga_modeGerd Hoffmann1-1/+1
Ask the vga core to update the display. Will trigger dpy_gfx_resize if needed. More complete than just calling dpy_gfx_resize. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-03-18qxl: zap qxl0 globalGerd Hoffmann1-13/+15
DisplayChangeListener is passed now to all DisplayChangeListenerOps callbacks, so we can use that to access the qxl state and kill the qxl0 global variable. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-03-18spice: zap sdpy globalGerd Hoffmann1-14/+16
DisplayChangeListener is passed now to all DisplayChangeListenerOps callbacks, so we can use that to access the spice display state and kill the sdpy global variable. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-03-18console: kill DisplayState->opaqueGerd Hoffmann4-25/+20
It's broken by design. There can be multiple DisplayChangeListener instances, so they simply can't store state in the (single) DisplayState struct. Try 'qemu -display gtk -vnc :0', watch it crash & burn. With DisplayChangeListenerOps having a more sane interface now we can simply use the DisplayChangeListener pointer to get access to our private data instead. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-03-18console: fix displaychangelisteners interfaceGerd Hoffmann12-228/+345
Split callbacks into separate Ops struct. Pass DisplayChangeListener pointer as first argument to all callbacks. Uninline a bunch of display functions and move them from console.h to console.c Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-03-17s390: Fix cpu refactoring fallout.Cornelia Huck1-2/+1
Commit 259186a7 "cpu: Move halted and interrupt_request fields to CPUState" seems to have missed one instance in target-s390x/kvm.c: /home/cohuck/git/qemu/target-s390x/kvm.c: In function ‘kvm_arch_process_async_events’: /home/cohuck/git/qemu/target-s390x/kvm.c:319: error: ‘CPUS390XState’ has no member named ‘halted’ /home/cohuck/git/qemu/target-s390x/kvm.c:320: warning: control reaches end of non-void function make[1]: *** [target-s390x/kvm.o] Error 1 Let's just switch to cs->halted. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Acked-by: Alexander Graf <agraf@suse.de> Acked-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-03-17Merge branch 'arm-devs.next' of git://git.linaro.org/people/pmaydell/qemu-armBlue Swirl14-78/+2234
* 'arm-devs.next' of git://git.linaro.org/people/pmaydell/qemu-arm: xilinx_spips: QOM styling fixes xilinx_spips: Add missing dual-bus snoop commands xilinx_spips: Fix bus setup conditional check xilinx_spips: Set unused IRQs to NULL xilinx_zynq: added pl330 to machine model pl330: Initial version iov: Factor out hexdumper hw/vexpress: Set reset values for daughterboard oscillators hw/arm_sysctl: Implement SYS_CFG_OSC function hw/vexpress: Pass voltage sensor properties to sysctl device hw/arm_sysctl: Implement SYS_CFG_VOLT qdev: Implement (variable length) array properties hw/arm_sysctl: Convert from qdev init to instance_init hw/arm_sysctl: Implement SYS_CFG_DVIMODE as a no-op hw/arm_sysctl: Implement SYS_CFG_MUXFPGA writes as a no-op hw/arm_sysctl: Handle SYS_CFGCTRL in a more structured way hw/vexpress: Pass proc_id via VEDBoardInfo
2013-03-17target-mips: fix rndrashift_short_acc and code for EXTR_ instructionsPetar Jovanovic4-14/+101
Fix for rndrashift_short_acc to set correct value to higher 64 bits. This change also corrects conditions when bit 23 of the DSPControl register is set. The existing test files have been extended with several examples that trigger the issues. One bug/example in the test file for EXTR_RS_W has been found and reported by Klaus Peichl. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-03-15xilinx_spips: QOM styling fixesPeter Crosthwaite1-13/+16
Few fixes for the latest QOM styling guides. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: de9daeee6c142e8b57ad042fd680cedcdc94d2fc.1362373359.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-03-15xilinx_spips: Add missing dual-bus snoop commandsNathan Rossi1-6/+23
Added additional commands to the switch to check for when snooping commands in dual bus mode setups. Cleaned up code to use an enum. Signed-off-by: Nathan Rossi <nathan.rossi@xilinx.com> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 848c116c711dab0af10729a487968384aadd9faf.1362373359.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-03-15xilinx_spips: Fix bus setup conditional checkNathan Rossi1-2/+2
The R_LQPSI_CFG register has the LQSPI_CFG_SEP_BUS and LQSPI_CFG_TWO_MEM bits. Signed-off-by: Nathan Rossi <nathan.rossi@xilinx.com> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: d76c8e364c80a42352ae4f0661aff2cd17ad32a4.1362373359.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-03-15xilinx_spips: Set unused IRQs to NULLPeter Crosthwaite1-1/+1
Unused CS lines should init to 0 to avoid segfaulting when accessing an unattached QSPI controller. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: c1e45198032106e69e8fe9339fc2e6348d524fcd.1362373359.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-03-15xilinx_zynq: added pl330 to machine modelPeter Crosthwaite1-0/+24
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 5bc295bd2aa50dfe573f428574dbd7d8add7b3f8.1361853677.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-03-15pl330: Initial versionPeter Crosthwaite3-0/+1656
Device model for Primecell PL330 DMA controller. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru> Tested-by: Igor Mitsyanko <i.mitsyanko@samsung.com> Reviewed-by: Igor Mitsyanko <i.mitsyanko@samsung.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 098aac26233d7334bed2bca4f06f539638ca6d24.1361853677.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-03-15iov: Factor out hexdumperPeter Crosthwaite4-25/+55
Factor out the hexdumper functionality from iov for all to use. Useful for creating verbose debug printfery that dumps packet data. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: faaac219c55ea586d3f748befaf5a2788fd271b8.1361853677.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-03-15hw/vexpress: Set reset values for daughterboard oscillatorsPeter Maydell1-0/+32
Set the reset values for the VExpress daughterboard oscillators via the new sysctl properties. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-03-15hw/arm_sysctl: Implement SYS_CFG_OSC functionPeter Maydell1-1/+56
Implement the SYS_CFG_OSC function. Since the idea of programmable clock rates doesn't make much sense for QEMU, we simply allow the clock rate to be read back as written. The number and value of the daughterboard oscillators varies between daughterboards, so we provide an array property to allow their reset values to be configured. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-03-15hw/vexpress: Pass voltage sensor properties to sysctl devicePeter Maydell1-0/+30
Pass voltage sensor properties to the sysctl device. Since these are daughterboard specific, we specify them via the VEDBoardInfo structure. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1359985476-29380-9-git-send-email-peter.maydell@linaro.org
2013-03-15hw/arm_sysctl: Implement SYS_CFG_VOLTPeter Maydell1-0/+26
Implement the SYS_CFG_VOLT registers which return the voltage of various supplies on motherboard and daughterboard. Since QEMU implements a perfectly stable power supply these registers always return a constant value. The number and value of the daughterboard voltages is dependent on the specific daughterboard, so we use a property array to allow the board to configure them appropriately. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-03-15qdev: Implement (variable length) array propertiesPeter Maydell3-0/+146
Add support for declaring array properties for qdev devices. These work by defining an initial static property 'len-arrayname' which the user of the device should set to the desired size of the array. When this property is set, memory is allocated for the array elements, and dynamic properties "arrayname[0]", "arrayname[1]"... are created so the user of the device can then set the values of the individual array elements. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-03-15hw/arm_sysctl: Convert from qdev init to instance_initPeter Maydell1-8/+8
Convert this device from old-style qdev init to an instance_init function. We don't need a realize function yet, though. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-03-15hw/arm_sysctl: Implement SYS_CFG_DVIMODE as a no-opPeter Maydell1-0/+8
SYS_CFG_DVIMODE allows the guest to select whether the output DVI signal is VGA, SVGA, XGA, SGA or UXGA. Since this makes no difference to QEMU, implement writes as a no-op so Linux doesn't complain. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-03-15hw/arm_sysctl: Implement SYS_CFG_MUXFPGA writes as a no-opPeter Maydell1-0/+11
SYS_CFG_MUXFPGA allows the guest to select whether the video output should come from the motherboard's LCD controller or the daughterboard's one. Since QEMU doesn't currently support selecting the video output like this, implement as a no-op, so Linux doesn't complain about the register not being implemented. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-03-15hw/arm_sysctl: Handle SYS_CFGCTRL in a more structured wayPeter Maydell1-11/+132
The SYS_CFGCTRL register consists of separate fields for DCC, function, site, position and device, as well as a read/write bit. Refactor the code handling SYS_CFGCTRL writes to make it easier to add support for functions like SYS_CFG_OSC which support multiple device fields. We also pull the handling out into its own function for clarity, as there are potentially a lot of implementable subfunctions. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-03-15hw/vexpress: Pass proc_id via VEDBoardInfoPeter Maydell1-11/+8
Pass the daughterboard-specific proc_id property to the code that creates the sysctl device via the VEDBoardInfo struct, rather than by having the daughterboard init function write to a uint32_t* argument. This is a cleaner way to pass the info around, and is in line with the way we are going to handle voltage and oscillator initialization. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-03-15Fix TAGS creationDavid Gibson1-1/+2
Currently the Makefile creates TAGS for emacs with the command: find "$(SRC_PATH)" -name '*.[hc]' -print0 | xargs -0 etags That works only if xargs ends up invoking etags just once. If xargs runs etags several times, as it will if there are enough files, then the later invocations will overwrite the output from the earlier invocations. This patch uses the etags --append option to fix the bug. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Message-id: 1363057048-21534-1-git-send-email-david@gibson.dropbear.id.au Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-15Merge remote-tracking branch 'stefanha/block' into stagingAnthony Liguori49-233/+702
# By Stefan Hajnoczi (14) and others # Via Stefan Hajnoczi * stefanha/block: (28 commits) blockdev: Fix up copyright and permission notice qemu-iotests: use -nographic in test case 007 qemu-iotests: add tests for rebasing zero clusters dataplane: fix hang introduced by AioContext transition coroutine: use AioContext for CoQueue BH threadpool: drop global thread pool block: add bdrv_get_aio_context() aio: add a ThreadPool instance to AioContext threadpool: add thread_pool_new() and thread_pool_free() threadpool: move globals into struct ThreadPool main-loop: add qemu_get_aio_context() sheepdog: set io_flush handler in do_co_req sheepdog: use non-blocking fd in coroutine context qcow2: make is_allocated return true for zero clusters qcow2: drop unnecessary flush in qcow2_update_snapshot_refcount() qcow2: drop flush in update_cluster_refcount() qcow2: flush in qcow2_update_snapshot_refcount() qcow2: set L2 cache dependency in qcow2_alloc_bytes() qcow2: flush refcount cache correctly in qcow2_write_snapshots() qcow2: flush refcount cache correctly in alloc_refcount_block() ...
2013-03-15Merge remote-tracking branch 'cohuck/virtio-ccw-upstr' into stagingAnthony Liguori2-1/+62
# By Christian Borntraeger (1) and Cornelia Huck (1) # Via Cornelia Huck * cohuck/virtio-ccw-upstr: virtio-ccw: Wire up virtio-rng. virtio-ccw: remove qdev_unparent in unplug routing
2013-03-15blockdev: Fix up copyright and permission noticeMarkus Armbruster1-0/+23
Screwed up in commit 666daa68. Thanks to Kevin Wolf for reminding me to fix this. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-15qemu-iotests: use -nographic in test case 007Stefan Hajnoczi1-4/+3
A comment explains that -nographic hangs test case 007. This is no longer the case so add -nographic. This makes the test suite faster and more pleasant to run since no windows pop up. I am not sure exactly when -nographic starting working for this case but there is no fundamental reason why graphics are needed here. Make sure the serial port is not on stdio, it would conflict with the monitor. Also remove unnecessary trailing whitespace on these lines. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Tested-by: Kevin Wolf <kwolf@redhat.com>
2013-03-15qemu-iotests: add tests for rebasing zero clustersPaolo Bonzini3-0/+93
If zero clusters are erroneously treated as unallocated, "qemu-img rebase" will copy the backing file's contents onto the cluster. The bug existed also in image streaming, but since the root cause was in qcow2's is_allocated implementation it is enough to test it with qemu-img. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-15dataplane: fix hang introduced by AioContext transitionPaolo Bonzini1-2/+15
The bug is that the EventNotifiers do have a NULL io_flush callback. Because _none_ of the callbacks on the dataplane AioContext have such a callback, aio_poll will simply do nothing. Fixed by adding the callbacks: the ioeventfd will always be polled (this can change in the future to pause/resume the processing during live snapshots or similar operations); the ioqueue will be polled if there are outstanding requests. I must admit I have screwed up my testing somehow, because commit 2c20e71 does not work even if cherry-picked on top of 1.4.0, and this patch fixes it there as well. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-15coroutine: use AioContext for CoQueue BHStefan Hajnoczi2-17/+39
CoQueue uses a BH to awake coroutines that were made ready to run again using qemu_co_queue_next() or qemu_co_queue_restart_all(). The BH currently runs in the iothread AioContext and would break coroutines that run in a different AioContext. This is a slightly tricky problem because the lifetime of the BH exceeds that of the CoQueue. This means coroutines can be awoken after CoQueue itself has been freed. Also, there is no qemu_co_queue_destroy() function which we could use to handle freeing resources. Introducing qemu_co_queue_destroy() has a ripple effect of requiring us to also add qemu_co_mutex_destroy() and qemu_co_rwlock_destroy(), as well as updating all callers. Avoid doing that. We also cannot switch from BH to GIdle function because aio_poll() does not dispatch GIdle functions. (GIdle functions make memory management slightly easier because they free themselves.) Finally, I don't want to move unlock_queue and unlock_bh into AioContext. That would break encapsulation - AioContext isn't supposed to know about CoQueue. This patch implements a different solution: each qemu_co_queue_next() or qemu_co_queue_restart_all() call creates a new BH and list of coroutines to wake up. Callers tend to invoke qemu_co_queue_next() and qemu_co_queue_restart_all() occasionally after blocking I/O, so creating a new BH for each call shouldn't be massively inefficient. Note that this patch does not add an interface for specifying the AioContext. That is left to future patches which will convert CoQueue, CoMutex, and CoRwlock to expose AioContext. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-15threadpool: drop global thread poolStefan Hajnoczi5-46/+43
Now that each AioContext has a ThreadPool and the main loop AioContext can be fetched with bdrv_get_aio_context(), we can eliminate the concept of a global thread pool from thread-pool.c. The submit functions must take a ThreadPool* argument. block/raw-posix.c and block/raw-win32.c use aio_get_thread_pool(bdrv_get_aio_context(bs)) to fetch the main loop's ThreadPool. tests/test-thread-pool.c must be updated to reflect the new thread_pool_submit() function prototypes. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-15block: add bdrv_get_aio_context()Stefan Hajnoczi2-0/+13
For now bdrv_get_aio_context() is just a stub that calls qemu_aio_get_context() since the block layer is currently tied to the main loop AioContext. Add the stub now so that the block layer can begin accessing its AioContext. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-15aio: add a ThreadPool instance to AioContextStefan Hajnoczi2-0/+17
This patch adds a ThreadPool to AioContext. It's possible that some AioContext instances will never use the ThreadPool, so defer creation until aio_get_thread_pool(). The reason why AioContext should have the ThreadPool is because the ThreadPool is bound to a AioContext instance where the work item's callback function is invoked. It doesn't make sense to keep the ThreadPool pointer anywhere other than AioContext. For example, block/raw-posix.c can get its AioContext's ThreadPool and submit work. Special note about headers: I used struct ThreadPool in aio.h because there is a circular dependency if aio.h includes thread-pool.h. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-15threadpool: add thread_pool_new() and thread_pool_free()Stefan Hajnoczi2-4/+53
ThreadPool is tied to an AioContext through its event notifier, which dictates in which AioContext the work item's callback function will be invoked. In order to support multiple AioContexts we need to support multiple ThreadPool instances. This patch adds the new/free functions. The free function deserves special attention because it quiesces remaining worker threads. This requires a new condition variable and a "stopping" flag to let workers know they should terminate once idle. We never needed to do this before since the global threadpool was not explicitly destroyed until process termination. Also stash the AioContext pointer in ThreadPool so that we can call aio_set_event_notifier() in thread_pool_free(). We didn't need to hold onto AioContext previously since there was no free function. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-15threadpool: move globals into struct ThreadPoolStefan Hajnoczi2-82/+112
Move global variables into a struct so multiple thread pools can be supported in the future. This patch does not change thread-pool.h interfaces. There is still a global thread pool and it is not yet possible to create/destroy individual thread pools. Moving the variables into a struct first makes later patches easier to review. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-15main-loop: add qemu_get_aio_context()Stefan Hajnoczi2-0/+10
It is very useful to get the main loop AioContext, which is a static variable in main-loop.c. I'm not sure whether qemu_get_aio_context() will be necessary in the future once devices focus on using their own AioContext instead of the main loop AioContext, but for now it allows us to refactor code to support multiple AioContext while actually passing the main loop AioContext. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-15sheepdog: set io_flush handler in do_co_reqMORITA Kazutaka1-2/+11
If an io_flush handler is not set, qemu_aio_wait doesn't invoke callbacks. Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
generated by cgit v1.2.1 (git 2.18.0) at 2024-06-29 15:12:04 +0000