summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2014-02-11exec: Make stq_*_phys input an AddressSpaceEdgar E. Iglesias18-92/+132
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-02-11exec: Make lduw_*_phys input an AddressSpaceEdgar E. Iglesias10-44/+48
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-02-11exec: Make ldq/ldub_*_phys input an AddressSpaceEdgar E. Iglesias25-137/+185
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-02-11exec: Make ldl_*_phys input an AddressSpaceEdgar E. Iglesias30-149/+190
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-02-11exec: On AS changes, only flush affected CPU TLBsEdgar E. Iglesias1-0/+5
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-02-11cpu: Add per-cpu address spaceEdgar E. Iglesias6-13/+33
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-02-11memory: Add MemoryListener to typedefs.hEdgar E. Iglesias2-2/+1
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-02-11exec: Make memory_region_section_get_iotlb use section ASEdgar E. Iglesias1-1/+1
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-02-11exec: Always initialize MemorySection address spacesEdgar E. Iglesias1-0/+2
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-02-11exec: Make iotlb_to_region input an ASEdgar E. Iglesias4-7/+7
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-02-11exec: Make tb_invalidate_phys_addr input an ASEdgar E. Iglesias4-5/+7
No functional change. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-02-11Merge remote-tracking branch ↵Peter Maydell42-112/+9000
'remotes/pmaydell/tags/pull-target-arm-20140208' into staging target-arm queue: * more A64 Neon instructions * AArch32 VCVTB and VCVTT ARMv8 instructions * fixes to inaccuracies in GIC emulation * libvixl disassembler for A64 * Allwinner SoC ethernet controller * zynq software system reset support # gpg: Signature made Sat 08 Feb 2014 15:53:05 GMT using RSA key ID 14360CDE # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" * remotes/pmaydell/tags/pull-target-arm-20140208: (29 commits) arm/zynq: Add software system reset via SCLR hw/arm/allwinner-a10: initialize EMAC hw/net: add support for Allwinner EMAC Fast Ethernet controller util/fifo8: clear fifo head upon reset util/fifo8: implement push/pop of multiple bytes disas: Implement disassembly output for A64 disas/libvixl: Fix upstream libvixl compilation issues disas: Add subset of libvixl sources for A64 disassembler rules.mak: Link with C++ if we have a C++ compiler rules.mak: Support .cc as a C++ source file suffix arm_gic: Add GICC_APRn state to the GICState vmstate: Add uint32 2D-array support arm_gic: Support setting/getting binary point reg arm_gic: Keep track of SGI sources arm_gic: Fix GIC pending behavior target-arm: Add support for AArch32 64bit VCVTB and VCVTT target-arm: A64: Add FNEG and FABS to the SIMD 2-reg-misc group target-arm: A64: Add 2-reg-misc REV* instructions target-arm: A64: Add narrowing 2-reg-misc instructions target-arm: A64: Implement 2-reg-misc CNT, NOT and RBIT ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-10Merge remote-tracking branch 'remotes/kvaneesh/for-upstream' into stagingPeter Maydell5-12/+25
* remotes/kvaneesh/for-upstream: hw/9pfs: fix P9_STATS_GEN handling hw/9pfs: make get_st_gen() return ENOTTY error on special files hw/9pfs: handle undefined FS_IOC_GETVERSION case in handle_ioc_getversion() hw/9pfs: fix error handing in local_ioc_getversion() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-10memory: fix limiting of translation at a page boundaryPaolo Bonzini1-16/+19
Commit 360e607 (address_space_translate: do not cross page boundaries, 2014-01-30) broke MMIO accesses in cases where the section is shorter than the full register width. This can happen for example with the Bochs DISPI registers, which are 16 bits wide but have only a 1-byte long MemoryRegion (if you write to the "second byte" of the register your access is discarded; it doesn't write only to half of the register). Restrict the action of commit 360e607 to direct RAM accesses. This is enough for Xen, since MMIO will not go through the mapcache. Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-10prep: Drop from ppcemb-softmmuAndreas Färber4-6/+3
ppcemb covers only embedded processors, which does not include PReP. Signed-off-by: Andreas Färber <andreas.faerber@web.de>
2014-02-10target-mips: add user-mode FR switch support for MIPS32r5Petar Jovanovic4-10/+56
Description of UFR feature: Required in MIPS32r5 if floating point is implemented and user-mode FR switching is supported. The UFR register allows user-mode to clear StatusFR by executing a CTC1 to UFR with GPR[0] as input, and read StatusFR by executing a CFC1 to UFR. helper_ctc1 has been extended with an additional parameter rt to check requirements for UFR feature. Definition of mips32r5-generic has been modified to include support for UFR. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Reviewed-by: Eric Johnson <eric.johnson@imgtec.com>
2014-02-10target-mips: add support for CP0_Config5Petar Jovanovic5-3/+40
Add CP0_Config5, define rw_bitmask and enable modifications. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Reviewed-by: Eric Johnson <eric.johnson@imgtec.com>
2014-02-10target-mips: add support for CP0_Config4Petar Jovanovic5-3/+31
Add CP0_Config4, define rw_bitmask. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Reviewed-by: Eric Johnson <eric.johnson@imgtec.com>
2014-02-10target-mips: add CPU definition for MIPS32R5Petar Jovanovic2-0/+33
Add mips32r5-generic among CPU definitions for MIPS. Define ISA_MIPS32R3 and ISA_MIPS32R5. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Reviewed-by: Eric Johnson <eric.johnson@imgtec.com>
2014-02-10ACPI: Remove commented-out code from HPET._CRSGabriel L. Somlo1-3/+0
IRQNoFlags on HPET._CRS crashes WinXP because it causes the HPET to conflict with the system timer and/or the RTC. It only occurs on Apple hardware, and even there it is exposed fully only when OS X is detected (via _OSI). Recent OS X versions work on QEMU without this statement, so at this time there is no need to find a better way to conditionally include the statement. This patch removes the commented out (and wrong, should have been {0, 8}) statement from HPET._CRS. Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-By: Igor Mammedov <imammedo@redhat.com>
2014-02-10hw/pci: switch to a generic hotplug handling for PCIDeviceIgor Mammedov5-45/+15
make qdev_unplug()/device_set_realized() to call hotplug handler's plug/unplug methods if available and remove not needed anymore hot(un)plug handling from PCIDevice. In case if hotplug handler is not available, revert to the legacy hotplug method for compatibility with not yet converted buses. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-10pci/pcie: convert PCIE hotplug to use hotplug-handler APIIgor Mammedov3-25/+53
Split pcie_cap_slot_hotplug() into hotplug/unplug callbacks and register them as "hotplug-handler" interface implementation of PCIE_SLOT device. Replace pci_bus_hotplug() wiring with setting link on PCI BUS "hotplug-handler" property to PCI_BRIDGE_DEV device. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-10pci/shpc: convert SHPC hotplug to use hotplug-handler APIIgor Mammedov3-47/+94
Split shpc_device_hotplug() into hotplug/unplug callbacks and register them as "hotplug-handler" interface implementation of PCI_BRIDGE_DEV device. Replace pci_bus_hotplug() wiring with setting link on PCI BUS "hotplug-handler" property to PCI_BRIDGE_DEV device. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-10acpi/piix4pm: convert ACPI PCI hotplug to use hotplug-handler APIIgor Mammedov4-30/+60
Split piix4_device_hotplug() into hotplug/unplug callbacks and register them as "hotplug-handler" interface implementation of PIIX4_PM device. Replace pci_bus_hotplug() wiring with setting link on PCI BUS "hotplug-handler" property to PIIX4_PM device. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-10qdev:pci: refactor PCIDevice to use generic "hotpluggable" propertyIgor Mammedov16-30/+21
Get rid of PCIDevice specific PCIDeviceClass.no_hotplug and use generic DeviceClass.hotpluggable field instead. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-10hw/acpi: move typeinfo to the file endIgor Mammedov1-46/+46
do so to avoid not necessary forward declarations and place typeinfo registration at the file end where it's usually expected. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-10qdev: add "hotpluggable" property to DeviceIgor Mammedov2-0/+32
Currently it's possible to make PCIDevice not hotpluggable by using no_hotplug field of PCIDeviceClass. However it limits this only to PCI devices and prevents from generalizing hotplug code. So add similar field to DeviceClass so it could be reused with other Devices and would allow to replace PCI specific hotplug callbacks with generic implementation. Following patches will replace PCIDeviceClass.no_hotplug with this new property. In addition expose field as "hotpluggable" readonly property, to make it possible to read its value via QOM interface. Make DeviceClass hotpluggable by default as it was assumed before. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-10qdev: add to BusState "hotplug-handler" linkIgor Mammedov2-0/+16
It will allow to reuse field with different BUSes, reducing code duplication. Field is intended for replacing 'hotplug_qdev' field in PCIBus and also will allow to avoid adding equivalent field to DimmBus with possiblitity to refactor other BUSes to use it instead of custom field. In addition once all users of allow_hotplug field are converted to new API, link could replace allow_hotplug field in qdev hotplug code. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-10define hotplug interfaceIgor Mammedov3-0/+127
Provide a generic hotplug interface for hotplug handlers. Intended for replacing hotplug mechanism used by PCI/PCIE/SHPC code and will be used for memory hotplug. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-10loader: document that errno is setMichael S. Tsirkin1-0/+7
Document that get_image_size sets errno on failure. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-09raven: Use constant PCI_NUM_PINS instead of 4Hervé Poussineau1-3/+3
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Andreas Färber <andreas.faerber@web.de>
2014-02-09prep: Kill get_system_io() usageHervé Poussineau1-1/+1
While ISA address space in prep machine is currently the one returned by get_system_io(), this depends of the implementation of i82378/raven devices, and this may not be the case forever. Use the right ISA address space when adding some more ports to it. We can use whatever ISA device on the right ISA bus, as all ISA devices on the same ISA bus share the same ISA address space. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Andreas Färber <andreas.faerber@web.de>
2014-02-09libcacard: Don't link with all libraries QEMU links toChristophe Fergeau1-1/+1
As described in https://bugzilla.redhat.com/show_bug.cgi?id=987441 , libcacard currently links to all the libraries QEMU is linking to, including glusterfs libraries, libiscsi, ... libcacard does not need all of these. This patch ensures it's only linked with the libraries it needs. Signed-off-by: Christophe Fergeau <cfergeau@redhat.com> Signed-off-by: Alon Levy <alevy@redhat.com>
2014-02-09block: Fix 32 bit truncation in mark_request_serialising()Kevin Wolf1-3/+3
On 32 bit hosts, size_t is too small for align as the bitmask ~(align - 1) will zero out the higher 32 bits of the offset. While at it, change the local overlap_bytes variable to unsigned to match the field in BdrvTrackedRequest. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2014-02-09blkdebug: Don't leak bs->file on failureKevin Wolf1-5/+9
Reported-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2014-02-09block: Don't call ROUND_UP with negative valuesKevin Wolf1-2/+2
The behaviour of the ROUND_UP macro with negative numbers isn't obvious. It happens to do the right thing in this please, but better avoid it. Suggested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2014-02-09block: bdrv_aligned_pwritev: Assert overlap rangeKevin Wolf1-0/+2
This adds assertions that the request that we actually end up passing to the block driver (which includes RMW data and has therefore potentially been rounded to alignment boundaries) is fully covered by the overlap_{offset,size} fields of the associated BdrvTrackedRequest. Suggested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2014-02-09block: Fix memory leaks in bdrv_co_do_pwritev()Kevin Wolf1-2/+2
The error path for a failure in one of the two bdrv_aligned_preadv() calls leaked head_buf or tail_buf, respectively. This fixes the memory leak. Reported-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2014-02-09raw: Fix BlockLimits passthroughKevin Wolf1-1/+7
raw copies over the BlockLimits of bs->file during bdrv_open(). However, since commit d34682cd it is immediately overwritten during bdrv_refresh_limits(). This caused all fields except for opt_transfer_length and opt_mem_alignment (which happen to be correctly inherited in generic code) to be zeroed. Move the BlockLimit assignment to a .bdrv_refresh_limits() callback to make it work again for all fields. Reported-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2014-02-09qemu-iotests: add test for qcow2 preallocation with different cluster sizesHu Tao3-0/+96
Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-02-09qcow2: check for NULL l2metaHu Tao1-15/+16
In the case of a metadata preallocation with a large cluster size, qcow2_alloc_cluster_offset() can allocate nothing and returns a NULL l2meta. This patch checks for it and link2 l2 with only valid l2meta. Replace 9 and 512 with BDRV_SECTOR_BITS, BDRV_SECTOR_SIZE respectively while at the function. Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-02-09qcow2: fix offset overflow in qcow2_alloc_clusters_at()Hu Tao1-1/+7
When cluster size is big enough it can lead to an offset overflow in qcow2_alloc_clusters_at(). This patch fixes it. The allocation is stopped each time at L2 table boundary (see handle_alloc()), so the possible maximum bytes could be 2^(cluster_bits - 3 + cluster_bits) cluster_bits - 3 is used to compute the number of entry by L2 and the additional cluster_bits is to take into account each clusters referenced by the L2 entries. so int is safe for cluster_bits<=17, unsafe otherwise. Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-02-09qcow2: remove n_start and n_end of qcow2_alloc_cluster_offset()Hu Tao4-16/+15
n_start can be actually calculated from offset. The number of sectors to be allocated(n_end - n_start) can be passed in in num. By removing n_start and n_end, we can save two parameters. The side effect is there is a bug in qcow2.c:preallocate() that passes incorrect n_start to qcow2_alloc_cluster_offset() is fixed. The bug can be triggerred by a larger cluster size than the default value(65536), for example: ./qemu-img create -f qcow2 \ -o 'cluster_size=131072,preallocation=metadata' file.img 4G Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-02-09block/iscsi: always fill bs->bl.opt_transfer_lengthPeter Lieven1-3/+2
the opt_transfer_length has nothing to do with logical block provisioning stuff so always copy it from the block limits VPD page. Reported-By: Benoit Canet <benoit@irqsave.net> Signed-off-by: Peter Lieven <pl@kamp.de> Reviewed-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-02-09block: Fail gracefully with missing filenameKevin Wolf3-5/+42
This fixes a regression introduced in commit 2a05cbe42 ('block: Allow block devices without files'): $ qemu-system-x86_64 -drive driver=file qemu-system-x86_64: block.c:892: bdrv_open_common: Assertion `!drv->bdrv_needs_filename || filename != ((void *)0)' failed. Now the respective check must be performed not only in bdrv_file_open(), but also in bdrv_open(). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-09qemu-iotests: enable support for NFS protocolPeter Lieven2-3/+22
Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-02-09qemu-iotests: enable test 016 and 025 to work with NFS protocolPeter Lieven2-2/+2
Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-02-09qemu-iotests: blacklist test 020 for NFS protocolPeter Lieven1-0/+5
reopening is currently not supported. Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-02-09qemu-iotests: change _supported_proto to file for various testsPeter Lieven25-25/+25
all these tests do anything of the following and thus fail with any protocol other than file: - the tests use rm, cp or mv shell commands which only work on file - the tests use qcow2.py - the images construct new filenames (e.g. backing file names) and the logic is broken for anything else than file Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-02-09block: add native support for NFSPeter Lieven5-0/+472
This patch adds native support for accessing images on NFS shares without the requirement to actually mount the entire NFS share on the host. NFS Images can simply be specified by an url of the form: nfs://<host>/<export>/<filename>[?param=value[&param2=value2[&...]]] For example: qemu-img create -f qcow2 nfs://10.0.0.1/qemu-images/test.qcow2 You need LibNFS from Ronnie Sahlberg available at: git://github.com/sahlberg/libnfs.git for this to work. During configure it is automatically probed for libnfs and support is enabled on-the-fly. You can forbid or enforce libnfs support with --disable-libnfs or --enable-libnfs respectively. Due to NFS restrictions you might need to execute your binaries as root, allow them to open priviledged ports (<1024) or specify insecure option on the NFS server. For additional information on ROOT vs. non-ROOT operation and URL format + parameters see: https://raw.github.com/sahlberg/libnfs/master/README Supported by qemu are the uid, gid and tcp-syncnt URL parameters. LibNFS currently support NFS version 3 only. Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.2.1 (git 2.18.0) at 2024-06-30 13:49:18 +0000