summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2011-01-27pci: bridge control fixupMichael S. Tsirkin1-1/+0
PCI_BRIDGE_CTL_DISCARD_STATUS (bit 10 in bridge control register) is W1C so we should not make it writeable, otherwise the assert(!(wmask & w1cmask)) in pci_default_write_config() is hit Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reported-by: Isaku Yamahata <yamahata@valinux.co.jp> Tested-by: Isaku Yamahata <yamahata@valinux.co.jp>
2011-01-26target-arm: Fix loading of scalar value for Neon multiply-by-scalarPeter Maydell1-6/+6
Fix the register and part of register we get the scalar from in the various "multiply vector by scalar" ops (VMUL by scalar and friends). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-26target-arm: Fix garbage collection of temporaries in Neon emulation.Christophe Lyon1-5/+13
Fix garbage collection of temporaries in Neon emulation. Signed-off-by: Christophe Lyon <christophe.lyon@st.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-26Support saturation with shift=0.Christophe Lyon1-16/+12
This patch fixes corner-case saturations, when the target range is zero. It merely removes the guard against (sh == 0), and makes: __ssat(0x87654321, 1) return 0xffffffff and set the saturation flag __usat(0x87654321, 0) return 0 and set the saturation flag Signed-off-by: Christophe Lyon <christophe.lyon@st.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-26target-sh4: update PTEH upon MMU exceptionAlexandre Courbot1-0/+4
Update the PTEH register to contain the VPN at which an MMU exception occured as specified by the SH4 reference. Signed-off-by: Alexandre Courbot <gnurou@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-26sh4: implement missing mmaped TLB read functionsAurelien Jarno3-6/+91
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-26sh4: implement missing mmaped TLB write functionsAurelien Jarno3-6/+69
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-26etrax: Dont decrease the granularity of timersEdgar E. Iglesias1-4/+0
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-01-25cris: Replace tcg branch sequence with setcondEdgar E. Iglesias1-9/+2
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-01-25pulseaudio: tweak configGerd Hoffmann1-9/+1
Zap unused divisor field. Raise the buffer size default. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: malc <av1474@comtv.ru>
2011-01-25pulseaudio: setup buffer attrsGerd Hoffmann1-1/+11
Request reasonable buffer sizes from pulseaudio. Without this pa_simple_write() can block quite long and lead to dropouts, especially with guests which use small audio ring buffers. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: malc <av1474@comtv.ru>
2011-01-25pulseaudio: process 1/4 buffer max at onceGerd Hoffmann1-13/+9
Limit the size of data pieces processed by the pulseaudio worker threads. Never ever process more than 1/4 of the buffer at once. Background: The buffer area currently processed by the pulseaudio thread is blocked, i.e. the main thread (or iothread) can't fill in more data there. The buffer processing time is roughly real-time due to the pa_simple_write() call blocking when the output queue to the pulse server is full. Thus processing big chunks at once means blocking a large part of the buffer for a long time. This brings high latency and can lead to dropouts. When processing the buffer in smaller chunks the rpos handling becomes a problem though. The thread reads hw->rpos without knowing whenever qpa_run_out has already seen the last (small) chunk processed and updated rpos accordingly. There is no point in reading hw->rpos though, pa->rpos can be used instead. We just need to take care to initialize pa->rpos before kicking the thread. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: malc <av1474@comtv.ru>
2011-01-25monitor: use after free in do_wav_capture()Isaku Yamahata1-1/+2
use after free in do_wav_capture() on the error path. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-25mips_fulong: remove bogus HAS_AUDIOIsaku Yamahata1-4/+0
remove bogus HAS_AUDIO according to 738012bec4c67e697e766edadab3f522c552a04d. Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Huacai Chen <zltjiangshi@gmail.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-25audio: consolidate audio_init()Isaku Yamahata8-80/+41
consolidate audio_init() and remove references to shoundhw. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-25target-sh4: fix index of address read error exceptionAlexandre Courbot1-1/+1
Exception index of address read error should be 0x0e0. Signed-off-by: Alexandre Courbot <gnurou@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-25target-sh4: fix TLB invalidation codeAlexandre Courbot1-2/+2
In cpu_sh4_invalidate_tlb, the UTLB was invalidated twice and the ITLB left unchaged, probably because of some unfortunate copy/paste. Signed-off-by: Alexandre Courbot <gnurou@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-24Merge remote branch 'kwolf/for-anthony' into stagingAnthony Liguori25-452/+764
2011-01-24SPARC: Add asr17 register supportFabien Chouteau3-1/+14
This register is activated by CPU_FEATURE_ASR17 in the feature field. Signed-off-by: Fabien Chouteau <chouteau@adacore.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-01-24SPARC: Emulation of Leon3Fabien Chouteau8-22/+419
Leon3 is an open-source VHDL System-On-Chip, well known in space industry (more information on http://www.gaisler.com). Leon3 is made of multiple components available in the GrLib VHDL library. Three devices are implemented: uart, timers and IRQ manager. You can find code for these peripherals in the grlib_* files. Signed-off-by: Fabien Chouteau <chouteau@adacore.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-01-24SPARC: Emulation of GRLIB APB UARTFabien Chouteau3-0/+214
This device exposes one parameter: - chardev (ptr) : Pointer to a qemu character device Emulation of GrLib devices is base on the GRLIB IP Core User's Manual: http://www.gaisler.com/products/grlib/grip.pdf Signed-off-by: Fabien Chouteau <chouteau@adacore.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-01-24SPARC: Emulation of GRLIB IRQMPFabien Chouteau3-0/+420
This device exposes two parameters: - set_pil_in (ptr) : A function to set the pil_in of the SPARC CPU - set_pil_in_opaque (ptr) : Opaque argument of the set_pil_in function Emulation of GrLib devices is base on the GRLIB IP Core User's Manual: http://www.gaisler.com/products/grlib/grip.pdf Signed-off-by: Fabien Chouteau <chouteau@adacore.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-01-24SPARC: Emulation of GRLIB GPTimerFabien Chouteau3-0/+470
This device exposes three parameters: - frequency (uint32) : The system frequency - irq-line (uint32) : IRQ line number for the first timer (others use irq-line + 1, irq-line + 2...) - nr-timers (uint32) : Number of timers Emulation of GrLib devices is base on the GRLIB IP Core User's Manual: http://www.gaisler.com/products/grlib/grip.pdf Signed-off-by: Fabien Chouteau <chouteau@adacore.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-01-24docs: Document scsi-disk and usb-storage removable parameterStefan Hajnoczi1-2/+11
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-01-24usb-msd: Propagate removable bit to SCSI deviceStefan Hajnoczi1-1/+3
USB Mass Storage Devices sometimes have the RMB (removable) bit set in the SCSI INQUIRY response. Thumbdrives tend to have the bit set whereas hard disks do not. Operating systems differentiate between removable devices and fixed devices. Under Linux, the anaconda installer looks for removable devices. Under Windows, only fixed devices may have more than one partition and AutoRun is also affected by the removable bit. For these reasons, allow USB Mass Storage Devices to override the removable bit: qemu -usb -drive if=none,file=test.img,cache=none,id=disk0 -device usb-storage,drive=disk0,removable=on The default is off. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-01-24scsi: Allow scsi_bus_legacy_add_drive() to set removable bitStefan Hajnoczi4-5/+10
scsi-disk devices may wish to override the removable bit. Add support for a qdev property on SCSI devices. This is will be used by usb-msd. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-01-24scsi-disk: Allow overriding SCSI INQUIRY removable bitStefan Hajnoczi1-0/+3
Provide the "removable" qdev property bit to override the SCSI INQUIRY removable (RMB) bit for non-CDROM devices. This will be used by USB Mass Storage Devices, which sometimes have this guest-visible bit set and sometimes do not. They therefore requires a means for user configuration. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-01-24target-mips: fix save_cpu_state() callsAurelien Jarno1-6/+6
The rule is: - don't save PC if the exception is only triggered by softmmu. - save PC if the exception can be triggered by an helper. Fix a 64-bit kernel crash when loading modules. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-24usb-bus: use snprintfBlue Swirl1-5/+7
Avoid this warning from OpenBSD linker: LINK i386-softmmu/qemu ../usb-bus.o(.text+0x27c): In function `usb_get_fw_dev_path': /src/qemu/hw/usb-bus.c:294: warning: sprintf() is often misused, please use snprintf() Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-01-24usb hid: add migration supportGerd Hoffmann1-2/+64
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-01-24usb hub: add migration supportGerd Hoffmann1-0/+24
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-01-24usb core: add migration supportGerd Hoffmann3-5/+31
Yes, seriously. There is no migration support at all for usb devices. They loose state, especially the device address, and stop responding because of that. Oops. Luckily there is so much broken usb hardware out there that the guest usually just kicks the device hard (via port reset and reinitialization), then continues without a hitch. So we got away with that in a surprising high number of cases. The arrival of remote wakeup (which enables autosuspend support) changes that picture though. The usb devices also forget that it they are supposed to wakeup, so they don't do that. The host also doesn't notice the device stopped working in case it suspended the device and thus expects it waking up instead of polling it. Result is that your mouse is dead. Lets start fixing that. Add a vmstate struct for USBDevice. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-01-24vnc: fix numlock+capslock trackingGerd Hoffmann1-2/+2
This patch makes the numlock+capslock tracking logic only look at keydown events. Without this patch the vnc server will insert bogous capslock keypress in case it sees the following key sequence: shift down --- 'A' down --- shift up --- 'A' up ^ here It doesn't hurt with a PS/2 keyboard, but it disturbs the USB Keyboard. And with the key event queue just added to the usb keyboard the guest will actually notice. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-01-24usb hid: move head+n to common structGerd Hoffmann1-24/+22
This patch moves the 'head' and 'n' fields from USBMouseState and USBKeyboardState to the common USBHIDState struct. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-01-24usb keyboard: add event event queueGerd Hoffmann1-6/+32
This patch adds a event queue to the usb keyboard. This makes sure the guest will see all key events even if they come in bursts. With this patch applied sending Ctrl-Alt-Del using vncviewer's F8 menu works. Also with autosuspend enabled the first keypress on a suspended keyboard takes a little longer to be delivered to the guest because the usb bus must be resumed first. Without event queue this easily gets lost. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-01-24add event queueing to USB HIDPaolo Bonzini1-94/+127
The polling nature of the USB HID device makes it very hard to double click or drag while on a high-latency VNC connection. This patch, based on work done in the Xen qemu-dm tree by Ian Jackson, fixes this bug by adding an event queue to the device. The event queue associates each movement with the correct button state, and remembers all button presses and releases as well. Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Gerd Hoffman <kraxel@redhat.com>
2011-01-24block: Use backing format driver during image creationStefan Hajnoczi1-3/+5
The backing format should be honored during image creation. For some reason we currently use the image format to open the backing file. This fails when the backing file has a different format than the image being created. Keep the image and backing format drivers completely separate. Also print the backing filename if there is an error opening the backing file instead of the image filename. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-01-24blockdev: Fix drive_del not to crash when drive is not in useMarkus Armbruster1-7/+9
Watch this: (qemu) drive_add 0 if=none,file=tmp.img OK (qemu) info block none0: type=hd removable=0 file=tmp.img ro=0 drv=raw encrypted=0 (qemu) drive_del none0 Segmentation fault (core dumped) do_drive_del()'s code to clean up the pointer from a qdev using the drive back to the drive needs to check whether such a device exists. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-01-24blockdev: Make drive_init() use error_report()Markus Armbruster1-31/+28
This makes the errors point to the error location, and fixes drive_add to report errors in the monitor instead of stderr. While there, tweak a few error messages for consistency. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-01-24blockdev: Fix error message for invalid -drive CHSMarkus Armbruster1-3/+3
When cyls, heads or secs are out of range, the error message prints buf, which points to the value of option "if". Bogus, may even be null. Drop that. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-01-24Fix block migration when the device size is not a multiple of 1 MBPierre Riteau1-2/+20
b02bea3a85cc939f09aa674a3f1e4f36d418c007 added a check on the return value of bdrv_write and aborts migration when it fails. However, if the size of the block device to migrate is not a multiple of BLOCK_SIZE (currently 1 MB), the last bdrv_write will fail with -EIO. Fixed by calling bdrv_write with the correct size of the last block. Signed-off-by: Pierre Riteau <Pierre.Riteau@irisa.fr> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-01-24qed: Refuse to create images on block devicesStefan Hajnoczi1-0/+6
QED relies on the underlying filesystem to extend the file and maintain its size. Check that images are not created on a block device. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-01-24Documentation: Add qemu-img check/rebaseKevin Wolf1-0/+41
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-01-24ide: Remove unneeded null pointer checkStefan Weil1-3/+1
With bm == NULL, other code in the same function would crash. This bug was reported by cppcheck: hw/ide/pci.c:280: error: Possible null pointer dereference: bm Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-01-24qcow2: Batch flushes for COWKevin Wolf3-4/+19
qcow2 calls bdrv_flush() after performing COW in order to ensure that the L2 table change is never written before the copy is safe on disk. Now that the L2 table is cached, we can wait with flushing until we write out the next L2 table. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-01-24qcow2: Use QcowCacheKevin Wolf5-298/+240
Use the new functions of qcow2-cache.c for everything that works on refcount block and L2 tables. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-01-24spice: add chardev (v5)Alon Levy7-2/+225
Adding a chardev backend for spice, where spice determines what to do with it based on the name attribute given during chardev creation. For usage by spice vdagent in conjunction with a properly named virtio-serial device, and future smartcard channel usage. Example usage: qemu -device virtio-serial -chardev spicevmc,name=vdagent,id=vdagent \ -device virtserialport,chardev=vdagent,name=com.redhat.spice.0 v4->v5: * add tracing events * fix missing comma * fix help string to show debug is optional v3->v4: * updated commit message v1->v3 changes: (v2 had a wrong commit message) * removed spice-qemu-char.h, folded into ui/qemu-spice.h * removed dead IOCTL code * removed comment * removed ifdef CONFIG_SPICE from qemu-config.c and qemu-options.hx help. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-01-24configure: Fix spice probeJiri Denemark1-3/+3
Non-existent $pkgconfig instead of $pkg_config was used when configure probes for spice availability. Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2011-01-24qxl: locking fixGerd Hoffmann1-0/+2
One spice worker call lacks the unlock/relock calls, which may lead to deadlocks, add them. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-01-24spice/qxl: zap spice 0.4 migration compatibility bitsGerd Hoffmann2-73/+10
Live migration from and to spice 0.4 qxl devices isn't going to work. Rip out the bits which attempt to support that. Zap the subsection logic which is obsolete now. Bumb the version to make a clean cut. This should obviously go in before 0.14 is released. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
generated by cgit v1.2.1 (git 2.18.0) at 2024-06-26 00:24:10 +0000