summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2011-12-06fix typo: delete redundant semicolonDong Xu Wang15-21/+21
Double semicolons should be single. Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-06win32: fix memory leakZhi Hui Li1-0/+7
string is allocated by g_malloc, will not be used after putenv, should be free before return. Paolo Bonzini <pbonzini@redhat.com> confirmed this is safe under Wine: "1) the underlying Win32 APIs require separate arguments for the variable and value; 2) even though in the end Wine stores the environment as name=value (http://source.winehq.org/source/dlls/ntdll/env.c), it does so in a single consecutive block of memory, not as a char* array like POSIX does. While (2) might apply only to Wine, (1) surely applies to Windows as well." Tested-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Li Zhi Hui <zhihuili@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-06net/socket.c : fix memory leakZhi Hui Li1-0/+3
Signed-off-by: Li Zhi Hui <zhihuili@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-06configure: Print a banner comment at the top of config.logPeter Maydell1-0/+5
Print a banner comment at the top of config.log identifying when configure was run and the arguments used. This is occasionally useful for debugging purposes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-06configure: Include #define name in check_define compiler errorPeter Maydell1-1/+1
Include the name of the #define being tested for in the compiler error produced when a check_define test is run and fails. This appears only in the config.log, but it does make it a little easier to debug problems by inspecting config.log. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-06console: Fix qemu_default_pixelformat() for 24 bppMarkus Armbruster1-0/+1
Falls through to 32 bpp. Harmless, because the only difference is the alpha component, and we're not using that. Spotted by Coverity. Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-06console: Fix console_putchar() for CSI JMarkus Armbruster1-0/+1
It falls through to the code for CSI K. "Erase Down" also does "Erase End of Line", "Erase Up" also does "Erase Start of Line", and "Erase Screen" also does "Erase Line". Happens not to be visible. Fix it anyway. Spotted by Coverity. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-06console: Clean up confusing indentation in console_putchar()Markus Armbruster1-9/+9
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-05hw/arm_gic.c: Ignore attempts to complete nonexistent IRQsPeter Maydell1-9/+18
Ignore attempts to complete non-existent IRQs; this fixes a buffer overrun if the guest writes a bad value to the GICC_EOIR register. (This case is UNPREDICTABLE so ignoring it is a valid choice.) Note that doing nothing if the guest writes 1023 to this register is not in fact a change in behaviour: the old code would also always do nothing in this case but in a non-obvious way. (The buffer overrun was noted by Coverity, see bug 887883.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-12-05configure: Drop armv4l/armv4b distinction in $cpuPeter Maydell1-14/+12
Drop the distinction between armv4l/armv4b in the $cpu variable (ie host cpu type) in favour of calling everything 'arm'. This makes it the same as the ARCH setting and removes some special casing. The only thing we were using the distinction for was to decide which endianness to use in cross compilation; do a cpp define check there instead. Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-12-05pseries: Fix array overrun bug in PCI codeDavid Gibson1-1/+1
spapr_populate_pci_devices() containd a loop with PCI_NUM_REGIONS (7) iterations. However this overruns the 'bars' global array, which only has 6 elements. In fact we only want to run this loop for things listed in the bars array, so this patch corrects the loop bounds to reflect that. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-12-05target-arm/helper.c: Don't allocate TCG resources unless TCG enabledPeter Maydell1-1/+1
Don't call arm_translate_init() (which allocates TCG resources) unless TCG is enabled. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-12-05target-arm/translate.c: Fix slightly misleading comment in Thumb decoderPeter Maydell1-3/+5
Clarify some slightly misleading comments in the Thumb decoder's handling of the memory hint space -- in particular one code path marked as 'UNPREDICTABLE or unallocated hint' also includes some legitimate preload instructions. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-12-05Fix hw_error messages from arm_timer.cPeter Chubb1-4/+4
Two of the calls to hw_error() in arm_timer.c contain the wrong function name. As suggested by Andreas Färber, use the C99 standard __func__ macro to get the correct name, instead of putting the name directly into the code. Signed-off-by: Peter Chubb <peter.chubb@nicta.com.au> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-12-05Merge remote-tracking branch 'kwolf/for-anthony' into stagingAnthony Liguori40-343/+1329
2011-12-05Merge remote-tracking branch 'aneesh/1.0-fixes' into stagingAnthony Liguori14-72/+130
2011-12-05Merge remote-tracking branch 'stefanha/trivial-patches' into stagingAnthony Liguori51-72/+71
2011-12-05Merge remote-tracking branch 'qemu-kvm/memory/batch' into stagingAnthony Liguori168-2730/+2396
2011-12-05Update version for 1.1 development branchAnthony Liguori1-1/+1
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-12-05block: convert qemu_aio_flush() calls to bdrv_drain_all()Stefan Hajnoczi12-13/+34
Many places in QEMU call qemu_aio_flush() to complete all pending asynchronous I/O. Most of these places actually want to drain all block requests but there is no block layer API to do so. This patch introduces the bdrv_drain_all() API to wait for requests across all BlockDriverStates to complete. As a bonus we perform checks after qemu_aio_wait() to ensure that requests really have finished. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05block: wait_for_overlapping_requests() deadlock detectionStefan Hajnoczi1-0/+8
Debugging a reentrant request deadlock was fun but in the future we need a quick and obvious way of detecting such bugs. Add an assert that checks we are not about to deadlock when waiting for another request. Suggested-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05block: implement bdrv_co_is_allocated() boundary casesStefan Hajnoczi1-8/+18
Cases beyond the end of the disk image are only implemented for block drivers that do not provide .bdrv_co_is_allocated(). It's worth making these cases generic so that block drivers that do implement .bdrv_co_is_allocated() also get them for free. Suggested-by: Mark Wu <wudxw@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05dma-helpers: Add trace eventsKevin Wolf2-0/+17
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-05cow: use bdrv_co_is_allocated()Stefan Hajnoczi1-3/+3
Now that bdrv_co_is_allocated() is available we can use it instead of the synchronous bdrv_is_allocated() interface. This is a follow-up that Kevin Wolf <kwolf@redhat.com> pointed out after applying the series that introduces bdrv_co_is_allocated(). It is safe to make cow_read() a coroutine_fn because its only caller is a coroutine_fn. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05block: add -drive copy-on-read=on|offStefan Hajnoczi4-3/+21
This patch adds the -drive copy-on-read=on|off command-line option: copy-on-read=on|off copy-on-read is "on" or "off" and enables whether to copy read backing file sectors into the image file. Copy-on-read avoids accessing the same backing file sectors repeatedly and is useful when the backing file is over a slow network. By default copy-on-read is off. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05block: core copy-on-read logicStefan Hajnoczi2-0/+73
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05block: request overlap detectionStefan Hajnoczi1-2/+43
Detect overlapping requests and remember to align to cluster boundaries if the image format uses them. This assumes that allocating I/O is performed in cluster granularity - which is true for qcow2, qed, etc. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05block: wait for overlapping requestsStefan Hajnoczi1-0/+35
When copy-on-read is enabled it is necessary to wait for overlapping requests before issuing new requests. This prevents races between the copy-on-read and a write request. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05block: add interface to toggle copy-on-readStefan Hajnoczi3-0/+28
The bdrv_enable_copy_on_read()/bdrv_disable_copy_on_read() functions can be used to programmatically enable or disable copy-on-read for a block device. Later patches add the actual copy-on-read logic. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05block: add request trackingStefan Hajnoczi2-1/+51
The block layer does not know about pending requests. This information is necessary for copy-on-read since overlapping requests must be serialized to prevent races that corrupt the image. The BlockDriverState gets a new tracked_request list field which contains all pending requests. Each request is a BdrvTrackedRequest record with sector_num, nb_sectors, and is_write fields. Note that request tracking is always enabled but hopefully this extra work is so small that it doesn't justify adding an enable/disable flag. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05coroutine: add qemu_co_queue_restart_all()Stefan Hajnoczi3-8/+14
It's common to wake up all waiting coroutines. Introduce the qemu_co_queue_restart_all() function to do this instead of looping over qemu_co_queue_next() in every caller. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05qemu-common: add QEMU_ALIGN_DOWN() and QEMU_ALIGN_UP() macrosStefan Hajnoczi1-0/+6
Add macros for aligning a number to a multiple, for example: QEMU_ALIGN_DOWN(500, 2000) = 0 QEMU_ALIGN_UP(500, 2000) = 2000 Since ALIGN_UP() is a common macro name use the QEMU_* namespace prefix. Hopefully this will protect us from included headers that leak something with a similar name. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05block: add bdrv_co_is_allocated() interfaceStefan Hajnoczi2-13/+26
This patch introduces the public bdrv_co_is_allocated() interface which can be used to query image allocation status while the VM is running. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05block: drop .bdrv_is_allocated() interfaceStefan Hajnoczi2-22/+18
Now that all block drivers have been converted to .bdrv_co_is_allocated() we can drop .bdrv_is_allocated(). Note that the public bdrv_is_allocated() interface is still available but is in fact a synchronous wrapper around .bdrv_co_is_allocated(). Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05cow: convert to .bdrv_co_is_allocated()Stefan Hajnoczi1-4/+4
The cow block driver does not keep internal state for cluster lookups. This means it is safe to perform cluster lookups in coroutine context without risk of race conditions that corrupt internal state. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05vdi: convert to .bdrv_co_is_allocated()Stefan Hajnoczi1-3/+3
It is trivial to switch from the synchronous .bdrv_is_allocated() interface to .bdrv_co_is_allocated() since vdi_is_allocated() does not block. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05vvfat: convert to .bdrv_co_is_allocated()Stefan Hajnoczi1-2/+2
It is trivial to switch from the synchronous .bdrv_is_allocated() interface to .bdrv_co_is_allocated() since vvfat_is_allocated() does not block. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05block: convert qcow2, qcow2, and vmdk to .bdrv_co_is_allocated()Stefan Hajnoczi3-11/+18
The qcow2, qcow, and vmdk block drivers are based on coroutines. They have a coroutine mutex which protects internal state. We can convert the .bdrv_is_allocated() function to .bdrv_co_is_allocated() by holding the mutex around the cluster lookup operation. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05qed: convert to .bdrv_co_is_allocated()Stefan Hajnoczi1-4/+11
The bdrv_qed_is_allocated() function is a synchronous wrapper around qed_find_cluster(), which performs the cluster lookup. In order to convert the synchronous function to a coroutine function we yield instead of using qemu_aio_wait(). Note that QED's cache is already safe for parallel requests so no locking is needed. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05block: add .bdrv_co_is_allocated()Stefan Hajnoczi2-0/+39
This patch adds the .bdrv_co_is_allocated() interface which is identical to .bdrv_is_allocated() but runs in coroutine context. Running in coroutine context implies that other coroutines might be performing I/O at the same time. Therefore it must be safe to run while the following BlockDriver functions are in-flight: .bdrv_co_readv() .bdrv_co_writev() .bdrv_co_flush() .bdrv_co_is_allocated() The new .bdrv_co_is_allocated() interface is useful because it can be used when a VM is running, whereas .bdrv_is_allocated() is a synchronous interface that does not cope with parallel requests. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05block: use public bdrv_is_allocated() interfaceStefan Hajnoczi1-1/+1
There is no need for bdrv_commit() to use the BlockDriver .bdrv_is_allocated() interface directly. Converting to the public interface gives us the freedom to drop .bdrv_is_allocated() entirely in favor of a new .bdrv_co_is_allocated() in the future. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05qcow2: Fix error path in qcow2_snapshot_load_tmpKevin Wolf1-12/+22
If the bdrv_read() of the snapshot's L1 table fails, return the right error code and make sure that the old L1 table is still loaded and we don't break the BlockDriverState completely. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-05qcow2: Fix order in qcow2_snapshot_deleteKevin Wolf1-15/+33
First the snapshot must be deleted and only then the refcounts can be decreased. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-05qcow2: Fix order of refcount updates in qcow2_snapshot_gotoKevin Wolf2-18/+50
The refcount updates must be moved so that in the worst case we can get cluster leaks, but refcounts may never be too low. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-05qcow2: Return real error in qcow2_snapshot_gotoKevin Wolf1-11/+40
Besides fixing the return code, this adds some comments that make clear how the code works and that it potentially breaks images if we fail in the wrong place. Actually fixing this is left for the next patch. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-05qcow2: Rework qcow2_snapshot_create error handlingKevin Wolf1-14/+41
Increase refcounts only after allocating a new L1 table has succeeded in order to make leaks less likely. If writing the snapshot table fails, revert in-memory state to be consistent with that on disk. While at it, make it return the real error codes instead of -1. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-05qcow2: Cleanups and memleak fix in qcow2_snapshot_createKevin Wolf1-15/+11
sn->id_str could be leaked before this. The rest of this patch changes comments, fixes coding style or removes checks that are unnecessary with g_malloc. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-05qcow2: Update snapshot table information at onceKevin Wolf1-12/+10
Failing in the middle wouldn't help with the integrity of the image, so doing everything in a single request seems better. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-05qcow2: Return real error code in qcow2_write_snapshotsKevin Wolf1-10/+38
Doesn't immediately fix anything as the callers don't use the return value, but they will be fixed next. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-05qcow2: Return real error code in qcow2_read_snapshotsKevin Wolf2-7/+23
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
generated by cgit v1.2.1 (git 2.18.0) at 2024-07-03 13:18:39 +0000