summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2009-10-05restore CFLAGS check for conflict and fix recursive CFLAGS issueThomas Monjalon2-4/+4
cc-option uses more make-syntax to replace the shell "if/else". Issue with recursive += is fixed by doing the first assignment simply-expanded, as explained in http://www.gnu.org/software/make/manual/html_node/Appending.html Signed-off-by: Thomas Monjalon <thomas@monjalon.net> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05virtio-pci: return error if virtio_console_init failsAmit Shah1-0/+3
Currently only one virtio_console device is supported. Trying to add multiple devices fails and such failure should be reported back to the qdev init functions. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05qdev: show name of device that fails initAmit Shah1-0/+1
When initialising a device fails, show the name of the failing device. The current behaviour is to silently exit on such errors. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05vnc: Set invalid buffer pointers to NULLStefan Weil1-2/+8
After qemu_free, the pointers for input and output buffers are no longer valid, so set them to NULL (most other calls of qemu_free in vnc.c use this pattern, too). Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05eepro100: Don't allow guests to fail assertionsKevin Wolf1-11/+35
The idea of using assert() for input validation is rather questionable. Let's remove it from eepro100, so that guests need to find more interesting ways if they want to crash qemu. This patch replaces asserts that are directly dependent on guest-accessible data by other means of error handling. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05qcow2: Increase maximum cluster size to 2 MBKevin Wolf4-9/+12
This patch increases the maximum qcow2 cluster size to 2 MB. Starting with 128k clusters, L2 tables span 2 GB or more of virtual disk space, causing 32 bit truncation and wraparound of signed integers. Therefore some variables need to use a larger data type. While being at reviewing data types, change some integers that are used for array indices to unsigned. In some places they were checked against some upper limit but not for negative values. This could avoid potential segfaults with corrupted qcow2 images. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05qemu/virtio-pci: remove unnecessary checkMichael S. Tsirkin1-2/+1
it's safe to call msix_write_config if msix is disabled, so call it unconditionally on pci config write. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05qemu: clean up target page usage in msixMichael S. Tsirkin4-36/+27
Since cpu_register_phys_memory does not require size to be a multiple of target page size, simply make msix page size 0x1000. Do this in msix, reverting part of 5e520a7d500ec2569d22d80f9ef4272a34cb3c80, as we no longer have to pass target page around. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05fix comment on cpu_register_physical_memory_offsetMichael S. Tsirkin1-2/+3
We don't require full pages in cpu_register_physical_memory, except for RAM. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05qemu/pci: reset device registers on bus resetMichael S. Tsirkin1-0/+13
Reset BARs and a couple of other registers on bus reset, as per PCI spec. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05qemu/pci: refactor code/symbolic constantsMichael S. Tsirkin2-20/+23
refactor code slightly, adding symbolic constants and functions, and using macros where possible. This will also make following reset patches easier. No functional changes. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05qemu/virtio: fix reset with device removalMichael S. Tsirkin1-6/+8
virtio pci registers its own reset handler, but fails to unregister it, which will lead to crashes after device removal. Solve this problem by switching to qdev reset handler, which is automatically unregistered. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05qemu/qdev: type safety in reset handlerMichael S. Tsirkin4-13/+19
Add type safety to qdev reset handlers, by declaring them as DeviceState * rather than void *. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05serial: convert isa to qdevGerd Hoffmann7-28/+75
Everything using standard isa I/O ports and IRQ windup is considerd being an actual isa device. That are all serial_init() users except mips_mipssim() which seems to have a non-standard IRQ windup. baud rate is fixed at 115200 now as no caller passed in something else. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05qdev: don't crash on unset drive properties.Gerd Hoffmann1-1/+1
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05floppy: move dma setup + drive connect to fdctrl_init_common()Gerd Hoffmann1-20/+11
isa-fdc is completely qdev-ified with this patch applied, all configuration uses properties. sysbus-fdc needs dma_channel config fixed. There is only one user (mips_jazz) which uses dma channel 0. Can anyone knowing this platform suggest how to deal with it? Is hardcoding fine? Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05floppy: add drive properties.Gerd Hoffmann8-46/+55
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05store a pointer to QemuOpts in DeviceState, release it when zapping a device.Gerd Hoffmann2-0/+4
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05allow if=none for drive_addGerd Hoffmann1-0/+3
Allow adding unconnected host drives by specifying if=none like it is possible with -drive. They can be put in use with drive attributes, like this: drive_add dummy if=none,id=mydisk,file=/some/disk.img device_add virtio-blk-pci,drive=mydisk which is the monitor aequivalent to these command line switches: -drive if=none,id=mydisk,file=/some/disk.img -device virtio-blk-pci,drive=mydisk Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05refactor drive_hot_addGerd Hoffmann1-19/+19
move pci device lookup into the "case IF_SCSI" section, so we can do something else for other interface types. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05drive cleanup fixes.Gerd Hoffmann9-43/+25
Changes: * drive_uninit() wants a DriveInfo now. * drive_uninit() also calls bdrv_delete(), so callers don't need to do that. * drive_uninit() calls are moved over to the ->exit() callbacks, destroy_bdrvs() is zapped. * setting bdrv->private is not needed any more as the only user (destroy_bdrvs) is gone. * usb-storage needs no drive_uninit, scsi-disk will handle that. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05pci: windup acpi-based hotplugGerd Hoffmann5-42/+26
Switch over acpi-based PCI hotplug for pc over to the new qdev-based pci hotplugging. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05pci: hotplug windupGerd Hoffmann2-2/+25
Create qdev infrastructure for pci hotplug. PCI bus implementations must register a handler for hotplug. Creating a new PCI device will automagically hot-plug it in case the PCI bus in question supports this. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05scsi: hotplug windupGerd Hoffmann2-0/+3
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05usb: hotplug windupGerd Hoffmann1-0/+2
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05qdev hotplug: infrastructure and monitor commands.Gerd Hoffmann4-4/+109
Adds device_add and device_del commands. device_add accepts accepts the same syntax like the -device command line switch. device_del expects a device id. So you should tag your devices with ids if you want to remove them later on, like this: device_add pci-ohci,id=ohci device_del ohci Unplugging via pci_del or usb_del works too. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05switch qemu-config to qemu_errorGerd Hoffmann1-4/+5
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05usb: hook unplug into qdev, cleanups + fixes.Gerd Hoffmann8-15/+56
Hook into DeviceInfo->exit(). handle_destroy() must not free the state struct, this is handled by the new usb_qdev_exit() function now. qdev_free(usb_device) works now. Fix usb hub to qdev_free() all connected devices on unplug. Unplugging a usb hub works now. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05pci: move unregister from PCIDevice to PCIDeviceInfoGerd Hoffmann8-11/+13
One more cleanup while being at it ;) Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05pci: use qdev for device destruction.Gerd Hoffmann3-5/+4
pci_unregister_device is static now and hooked into Devicestate->exit. qdev_free(pci_device) works now. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05Implement scsi device destructionGerd Hoffmann3-11/+21
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05Add exit callback to DeviceInfo.Gerd Hoffmann2-0/+4
This adds a exit callback for device destruction to DeviceInfo, so we can hook cleanups into qdev device destruction. Followup patches will put that into use. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05qdev: device free fixups.Gerd Hoffmann2-4/+38
Two bug fixes: * When freeing a device we unregister even stuff we didn't register in the first place because the ->init() callback failed. * When freeing a device with child busses attached, we fail to zap the child bus (and the devices attached to it). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05parallel: convert isa to qdevGerd Hoffmann5-14/+57
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05update pc-bios/bios.binGerd Hoffmann1-0/+0
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05update pcbios submodule to current masterGerd Hoffmann1-0/+0
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05piix_pci: kill PIIX3IrqStateGerd Hoffmann1-20/+17
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05convert pci bridge to qdevGerd Hoffmann1-18/+48
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05support inplace allocation for pci bus, split irq init.Gerd Hoffmann2-10/+38
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05switch ide bus to inplace allocation.Gerd Hoffmann4-39/+36
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05switch usb bus to inplace allocation.Gerd Hoffmann5-15/+12
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05switch scsi bus to inplace allocation.Gerd Hoffmann5-22/+19
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05allow qdev busses allocations be inplaceGerd Hoffmann2-3/+15
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05temporary fix for on_vcpuGlauber Costa1-0/+4
Recent changes made on_vcpu hit the abort() path, even with the IO thread disabled. This is because cpu_single_env is no longer set when we call this function. Although the correct fix is a little bit more complicated that that, the recent thread in which I proposed qemu_queue_work (which fixes that, btw), is likely to go on a quite different direction. So for the benefit of those using guest debugging, I'm proposing this simple fix in the interim. Signed-off-by: Glauber Costa <glommer@redhat.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05kvm: Fix guest single-steppingJan Kiszka1-1/+7
Hopefully the last regression of 4c0960c0: KVM_SET_GUEST_DEBUG requires properly synchronized guest registers (on x86: eflags) on entry. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05gdbstub: x86: Switch 64/32 bit registers dynamicallyJan Kiszka2-15/+47
Commit 56aebc891674cd2d07b3f64183415697be200084 changed gdbstub in way that debugging 32 or 16-bit guest code is no longer possible with qemu for x86_64 guest CPUs. Since that commit, qemu only provides registers sets for 64-bit, forcing current and foreseeable gdb to also switch its architecture to 64-bit. And this breaks if the inferior is 32 or 16 bit. No question, this is a gdb issue. But, as it was confirmed in several discusssions with gdb people, it is a non-trivial thing to fix. So until qemu finds a gdb version attach with a rework x86 support, we have to work around it by switching the register layout as the guest switches its execution mode between 16/32 and 64 bit. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05Enable host-clock-based RTCJan Kiszka5-25/+49
Switch RTC emulations to the new host_clock instead of vm_clock by default. This has the advantage that the emulated RTC will follow automatically the host time while it might be tuned via NTP. vm_clock can still be selected by passing '-rtc clock=vm' on the command line. Note that some RTC emulations (at least M48T59) already use the host time unconditionally while others (namely MC146818) do not. This patch introduces the required infrastructure for selecting the base clock but only converts MC146818 for now. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05Refactor RTC command line switchesJan Kiszka4-57/+119
Deprecate -localtime, -setdate and -rtc-td-hack in favor of a new unified command line switch: -rtc [base=utc|localtime|date][,driftfix=none|slew] Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05Introduce QEMU_CLOCK_HOSTJan Kiszka2-11/+42
Despite its name QEMU_CLOCK_REALTIME is (normally) not using CLOCK_REALTIME / the host system time as base. In order to allow also non-trivial RTC emulations (MC146818) to follow the host time instead of the virtual guest time, introduce the new clock type QEMU_CLOCK_HOST. It is unconditionally based on CLOCK_REALTIME, thus will follow system time changes of the host. The only limitation of its current implementation is that pending host_clock timers may not fire early if the host time is pushed forward beyond their expiry. So far no urgent need to overcome this limitation was identified, so it's left as simple as it is (expiry on next alarm timer tick). Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05win32: Drop dead dyntick timer codeJan Kiszka1-5/+1
nearest_delta_us is calculated but not used. Drop it. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.2.1 (git 2.18.0) at 2024-07-03 10:54:53 +0000