summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2010-12-17qemu-io: Fix typo in help textsKevin Wolf1-7/+7
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17raw-posix: add discard supportChristoph Hellwig2-0/+71
Add support to discard blocks in a raw image residing on an XFS filesystem by calling the XFS_IOC_UNRESVSP64 ioctl to punch holes. Support for other hole punching mechanisms can be added when they become available. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17qemu-io: Add discard commandStefan Hajnoczi1-0/+88
discard [-Cq] off len -- discards a number of bytes at a specified offset discards a range of bytes from the given offset Example: 'discard 512 1k' - discards 1 kilobyte from 512 bytes into the file Discards a segment of the currently open file. -C, -- report statistics in a machine parsable format -q, -- quite mode, do not show I/O statistics Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17scsi-disk: support WRITE SAME (16) with unmap bitChristoph Hellwig2-2/+52
Support discards via the WRITE SAME command with the unmap bit set, and tell the initiator about the support for it via the block limit and the new thin provisioning EVPD pages. Also fix the comment which incorrectly describedthe block limits EVPD page. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17block: add discard supportChristoph Hellwig4-1/+24
Add a new bdrv_discard method to free blocks in a mapping image, and a new drive property to set the granularity for these discard. If no discard granularity support is set discard support is disabled. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17ide: Register vm change state handler once onlyStefan Hajnoczi3-28/+58
We register the vm change state handler in a PCI BAR map() function. This function can be called multiple times throughout the lifetime of a PCI IDE device. This results in duplicate vm change state handlers being register, none of which are ever unregistered. Instead, register the vm change state handler in the device's init function once and for all. piix tested, cmd646 and via not tested. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17Remove NULL checks for bdrv_new return valueKevin Wolf4-19/+7
It's an indirect call to qemu_malloc, which never returns an error. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17qemu.img.c: Use error_report() instead of own error() implementationJes Sorensen1-65/+62
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17bdrv_img_create() use proper errno return valuesJes Sorensen1-13/+10
Kevin suggested to have bdrv_img_create() return proper -errno values on error. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17Prevent creating an image with the same filename as backing fileJes Sorensen1-4/+11
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17Introduce do_snapshot_blkdev() and monitor command to handle it.Jes Sorensen3-0/+82
The monitor command is: snapshot_blkdev <device> [snapshot-file] [format] Default format is qcow2. For now snapshots without a snapshot-file, eg internal snapshots, are not supported. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17qemu-img.c: Re-factor img_create()Jes Sorensen3-106/+147
This patch re-factors img_create() moving the code doing the actual work into block.c where it can be shared with QEMU. This is needed to be able to create images from QEMU to be used for live snapshots. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17qemu-img: Call error_set_prognameKevin Wolf1-0/+3
Call error_set_progname during the qemu-img initialization, so that error messages printed with error_report() use the right prefix. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17ide: honor ncq for atapiAlexander Graf1-0/+6
ATAPI also can do ncq, so let's expose the capability. This patch makes CD-ROM support work on Windows 7 for me. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17ahci: set SATA Mode SelectSebastian Herbszt1-0/+3
Set SATA Mode Select to AHCI in the Address Map Register. Signed-off-by: Sebastian Herbszt <herbszt@gmx.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17config: add ahci for pci capable machinesAlexander Graf1-0/+1
This patch enables AHCI for all machines supporting PCI. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17config: move ide core and pci to pci.makAlexander Graf14-33/+3
Every device that can do PCI should also be able to do IDE. So let's move the IDE definitions over to pci.mak. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17ahci: add ahci emulationAlexander Graf2-0/+1525
This patch adds an emulation layer for an ICH-9 AHCI controller. For now this controller does not do IDE legacy emulation. It is a pure AHCI controller. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17pci: add ich9 pci idAlexander Graf1-0/+1
We need a PCI ID for our new AHCI adapter. I just picked an ICH-9 because that's the one in the Q35 chipset. This patch adds a PCI ID define for an ICH-9 AHCI adapter. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17pci: add storage class for sataAlexander Graf1-0/+1
This patch adds the storage sata class id. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17ide: add ncq identify data for ahci sata drivesRoland Elek2-0/+9
I modified ide_identify() to include the zero-based queue length value in word 75, and set bit 8 in word 76 to signal NCQ support in the identify data for AHCI SATA drives. Signed-off-by: Roland Elek <elek.roland@gmail.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17ide: move transfer_start after variable modificationAlexander Graf1-4/+4
We hook into transfer_start and immediately call the end function for ahci. This means that everything needs to be in place for the end function when we start the transfer, so let's move the function down to where all state is in place. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17ide: Split out BMDMA code from ATA coreAlexander Graf7-298/+446
The ATA core is currently heavily intertwined with BMDMA code. Let's loosen that a bit, so we can happily replace the DMA backend with different implementations. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17ide: fix whitespace gap in ide_exec_cmdAlexander Graf1-367/+367
Now that we have the function split out, we have to reindent it. In order to increase the readability of the actual functional change, this is split out. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17ide: split ide command interpretation offAlexander Graf2-6/+16
The ATA command interpretation code can be used for PATA and SATA interfaces alike. So let's split it out into a separate function. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17qemu-img.c: Clean up handling of image size in img_create()Jes Sorensen1-6/+17
This cleans up the handling of image size in img_create() by parsing the value early, and then only setting it once if a value has been added as the last argument to the command line. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17Introduce strtosz_suffix()Jes Sorensen2-3/+21
This introduces strtosz_suffix() which allows the caller to specify a default suffix in case the non default of MB is wanted. strtosz() is kept as a wrapper for strtosz_suffix() which keeps it's current default of MB. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17block: Fix the use of protocols in backing filesStefan Hajnoczi1-3/+11
Backing filenames may contain a protocol. The code currently doesn't consider this case and produces filenames that embed "<protocol>:". Don't combine filenames if the backing filename contains a protocol. Based on an earlier patch by Anthony Liguori <aliguori@us.ibm.com>. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17block: Introduce path_has_protocol() functionStefan Hajnoczi1-28/+36
The bdrv_find_protocol() function returns NULL if an unknown protocol name is given. It returns the "file" protocol when the filename contains no protocol at all. This makes it difficult to distinguish between paths which contain a protocol and those which do not. Factor out a helper function that tests whether or not a filename has a protocol. The next patch makes use of this function. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17blockdev: check dinfo ptr before usingRyan Harper1-2/+4
If a user decides to punish a guest by revoking its block device via drive_del, and subsequently also attempts to remove the pci device backing it, and the device is using blockdev_auto_del() then we get a segfault when we attempt to access dinfo->auto_del.[1] The fix is to check if drive_get_by_blockdev() actually returns a valid dinfo pointer or not. 1. (qemu) pci_add auto storage file=images/test01.raw,if=virtio,id=block1,snapshot=on (qemu) drive_del block1 (qemu) pci_del 5 *segfault* Signed-off-by: Ryan Harper <ryanh@us.ibm.com> Tested-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17Merge remote branch 'arm/for-anthony' into stagingAnthony Liguori6-42/+312
2010-12-17Merge remote branch 'kwolf/for-anthony' into stagingAnthony Liguori9-107/+1344
2010-12-17Merge remote branch 'qmp/for-anthony' into stagingAnthony Liguori2-49/+39
2010-12-17Merge remote branch 'jvrao/for-anthony' into stagingAnthony Liguori7-12/+80
2010-12-17Merge remote branch 'mst/for_anthony' into stagingAnthony Liguori13-122/+195
2010-12-14qemu-img: Fail creation if backing format is invalidStefan Hajnoczi1-10/+12
The qemu-img create command should check the backing format to ensure only image files with valid backing formats are created. By checking in qemu-img.c we can print a useful error message. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-14qemu-img: Free option parameter lists in img_create()Stefan Hajnoczi1-2/+2
Free option parameter lists in the img_create() error return path. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-14qemu-option: Fix parse_option_parameters() documentation typoStefan Hajnoczi1-2/+2
Yoda said, "list is the templace is". Fix this. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-14qemu-option: Don't reinvent append_option_parameters()Stefan Hajnoczi1-8/+1
parse_option_parameters() may need to create a new option parameter list from a template list. Use append_option_parameters() instead of duplicating the code. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-14qemu-img: Deprecate obsolete -6 and -e optionsJes Sorensen2-32/+22
If -6 or -e is specified, an error message is printed and we exit. It does not print help() to avoid the error message getting lost in the noise. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-14ceph/rbd block driver for qemu-kvmChristian Brunner4-0/+1183
RBD is an block driver for the distributed file system Ceph (http://ceph.newdream.net/). This driver uses librados (which is part of the Ceph server) for direct access to the Ceph object store and is running entirely in userspace (Yehuda also wrote a driver for the linux kernel, that can be used to access rbd volumes as a block device). Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Christian Brunner <chb@muc.de> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-14Make error handling more consistent in img_create() and img_resize()Jes Sorensen1-6/+12
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-14Fail if detecting an unknown optionJes Sorensen1-0/+8
This patch changes qemu-img to exit if an unknown option is detected, instead of trying to continue with a set of arguments which may be incorrect. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-14Fix formatting and missing braces in qemu-img.cJes Sorensen1-26/+51
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-14Consolidate printing of block driver optionsJes Sorensen1-9/+37
This consolidates the printing of block driver options in print_block_option_help() which is called from both img_create() and img_convert(). This allows for the "?" detection to be done just after the parsing of options and the filename, instead of half way down the codepath of these functions. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-14img_convert(): Only try to free bs[] entries if bs is valid.Jes Sorensen1-5/+8
This allows for jumping to 'out:' consistently for error exit. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-14Use qemu_mallocz() instead of calloc() in img_convert()Jes Sorensen1-6/+2
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-14Add missing tracing to qemu_mallocz()Jes Sorensen1-1/+4
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-14block: Make bdrv_create_file() ':' handling consistentStefan Hajnoczi1-1/+1
Filenames may start with "<protocol>:" to explicitly use a protocol like nbd. Filenames with unknown protocols are rejected in most of QEMU except for bdrv_create_file(). Even if a file with an invalid filename can be created, QEMU cannot use it since all the other relevant functions reject such paths. Make bdrv_create_file() consistent. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-12Watchdog: disable watchdog timer when hard-rebooting a guest.Richard W.M. Jones2-5/+20
This commit causes the watchdog timer to be reset when a guest is hard-rebooted. The failure case previously was as follows: (a) guest boots, watchdog is enabled (b) guest does a reset eg: echo 'b' > /proc/sysrq-trigger (note that an ordinary /sbin/reboot wouldn't hit this case since as the watchdog daemon is shut down, the daemon would properly disable the watchdog device) (c) the reboot takes longer than the remaining time on the watchdog (d) the watchdog therefore fires during the reboot (e) probably the VM would just reboot again at this point which is pretty benign, but it could depend on the action that the user had selected for the watchdog Now we use the qdev reset function to register a reset handler which disables the timer. Note the handler is called _either_ just after init _or_ when the guest reboots. In the i6300esb case there is a small refactoring of the code so that the device's internal state is now fully restored to defaults on a reboot. Signed-off-by: Richard W.M. Jones <rjones@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
generated by cgit v1.2.1 (git 2.18.0) at 2024-07-13 23:17:49 +0000