summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2015-06-22qmp: Wean off qerror_report()Markus Armbruster11-126/+50
The traditional QMP command handler interface int qmp_FOO(Monitor *mon, const QDict *params, QObject **ret_data); doesn't provide for returning an Error object. Instead, the handler is expected to stash it in the monitor with qerror_report(). When we rebased QMP on top of QAPI, we didn't change this interface. Instead, commit 776574d introduced "middle mode" as a temporary aid for converting existing QMP commands to QAPI one by one. More than three years later, we're still using it. Middle mode has two effects: * Instead of the native input marshallers static void qmp_marshal_input_FOO(QDict *, QObject **, Error **) it generates input marshallers conforming to the traditional QMP command handler interface. * It suppresses generation of code to register them with qmp_register_command() This permits giving them internal linkage. As long as we need qmp-commands.hx, we can't use the registry behind qmp_register_command(), so the latter has to stay for now. The former has to go to get rid of qerror_report(). Changing all QMP commands to fit the QAPI mold in one go was impractical back when we started, but by now there are just a few stragglers left: do_qmp_capabilities(), qmp_qom_set(), qmp_qom_get(), qmp_object_add(), qmp_netdev_add(), do_device_add(). Switch middle mode to generate native input marshallers, and adapt the stragglers. Simplifies both the monitor code and the stragglers. Rename do_qmp_capabilities() to qmp_capabilities(), and do_device_add() to qmp_device_add, because that's how QMP command handlers are named today. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22tpm: Avoid qerror_report() outside QMP command handlersMarkus Armbruster1-5/+4
qerror_report() is a transitional interface to help with converting existing monitor commands to QMP. It should not be used elsewhere. Replace by error_report(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22qerror: Clean up QERR_ macros to expand into a single stringMarkus Armbruster54-363/+367
These macros expand into error class enumeration constant, comma, string. Unclean. Has been that way since commit 13f59ae. The error class is always ERROR_CLASS_GENERIC_ERROR since the previous commit. Clean up as follows: * Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and delete it from the QERR_ macro. No change after preprocessing. * Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into error_setg(...). Again, no change after preprocessing. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22qerror: Eliminate QERR_DEVICE_NOT_FOUNDMarkus Armbruster10-29/+52
Error classes other than ERROR_CLASS_GENERIC_ERROR should not be used in new code. Hiding them in QERR_ macros makes new uses hard to spot. Fortunately, there's just one such macro left. Eliminate it with this coccinelle semantic patch: @@ expression EP, E; @@ -error_set(EP, QERR_DEVICE_NOT_FOUND, E) +error_set(EP, ERROR_CLASS_DEVICE_NOT_FOUND, "Device '%s' not found", E) Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22vl: Use error_report() for --display errorsMarkus Armbruster1-8/+8
Results in nicer error messages. Before this patch: Invalid GTK option string: gtk,lirum-larum After: qemu-system-x86_64: -display gtk,lirum-larum: Invalid GTK option string Of course, the thing ought to use QemuOpts instead of parsing by hand. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22vl: Avoid qerror_report() outside QMP command handlersMarkus Armbruster1-14/+9
qerror_report() is a transitional interface to help with converting existing monitor commands to QMP. It should not be used elsewhere. Replace by error_report() in initial startup helpers parse_sandbox() and parse_add_fd(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22QemuOpts: Wean off qerror_report_err()Markus Armbruster18-62/+109
qerror_report_err() is a transitional interface to help with converting existing monitor commands to QMP. It should not be used elsewhere. The only remaining user in qemu-option.c is qemu_opts_parse(). Is it used in QMP context? If not, we can simply replace qerror_report_err() by error_report_err(). The uses in qemu-img.c, qemu-io.c, qemu-nbd.c and under tests/ are clearly not in QMP context. The uses in vl.c aren't either, because the only QMP command handlers there are qmp_query_status() and qmp_query_machines(), and they don't call it. Remaining uses: * drive_def(): Command line -drive and such, HMP drive_add and pci_add * hmp_chardev_add(): HMP chardev-add * monitor_parse_command(): HMP core * tmp_config_parse(): Command line -tpmdev * net_host_device_add(): HMP host_net_add * net_client_parse(): Command line -net and -netdev * qemu_global_option(): Command line -global * vnc_parse_func(): Command line -display, -vnc, default display, HMP change, QMP change. Bummer. * qemu_pci_hot_add_nic(): HMP pci_add * usb_net_init(): Command line -usbdevice, HMP usb_add Propagate errors through qemu_opts_parse(). Create a convenience function qemu_opts_parse_noisily() that passes errors to error_report_err(). Switch all non-QMP users outside tests to it. That leaves vnc_parse_func(). Propagate errors through it. Since I'm touching it anyway, rename it to vnc_parse(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22qdev-monitor: Propagate errors through qdev_device_add()Markus Armbruster3-24/+21
Also polish an error message while I'm touching the line anyway, Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Andreas Färber <afaerber@suse.de>
2015-06-22qdev-monitor: Propagate errors through set_property()Markus Armbruster1-3/+3
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Andreas Färber <afaerber@suse.de>
2015-06-22qdev-monitor: Convert qbus_find() to ErrorMarkus Armbruster2-15/+20
As usual, the conversion breaks printing explanatory messages after the error: actual printing of the error gets delayed, so the explanations precede rather than follow it. Pity. Disable them for now. See also commit 7216ae3. While there, eliminate QERR_BUS_NOT_FOUND, and clean up unusual spelling in the error message. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-06-22qdev-monitor: Fix check for full busMarkus Armbruster1-14/+17
Property bus has always been too screwed up to be really usable for values other than plain bus IDs. This just fixes a bug that crept in in commit 1395af6 "qdev: add a maximum device allowed field for the bus." It doesn't always fail when it should: $ qemu-system-x86_64 -nodefaults -device virtio-serial-pci -device virtio-rng-device,bus=pci.0/virtio-serial-pci/virtio-bus Happily plugs the virtio-rng-device into the virtio-bus provided by virtio-serial-pci, even though its only slot is already occupied by a virtio-serial-device. And sometimes fails when it shouldn't: $ qemu-system-x86_64 -nodefaults -device virtio-serial-pci -device virtserialport,bus=virtio-bus/virtio-serial-device Yes, the virtio-bus is full, but the virtio-serial-bus provided by virtio-serial-device isn't, and that's the one we're trying to use. Root cause: we check "bus full" when we resolve the first element of the path. That's the correct one only when it's also the last one. Fix by moving the "bus full" check to right before we return a bus. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-06-22qdev-monitor: Stop error avalanche in qbus_find_recursive()Markus Armbruster1-24/+40
Reproducer: $ qemu-system-x86_64 -nodefaults -device virtio-rng-pci -device virtio-rng-pci -device virtio-rng-device,bus=virtio-bus qemu-system-x86_64: -device virtio-rng-device,bus=virtio-bus: Bus 'virtio-bus' is full qemu-system-x86_64: -device virtio-rng-device,bus=virtio-bus: Bus 'virtio-bus' is full qemu-system-x86_64: -device virtio-rng-device,bus=virtio-bus: Bus 'virtio-bus' not found qbus_find_recursive() reports the "is full" error itself, and leaves reporting "not found" to its caller. The result is confusion. Write it a function contract that permits leaving all error reporting to the caller, and implement it. Update callers to detect and report "is full". Screwed up when commit 1395af6 added the max_dev limit and the "is full" error condition to enforce it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-06-22disas: Remove uses of CPU envPeter Crosthwaite21-29/+29
disas does not need to access the CPU env for any reason. Change the APIs to accept CPU pointers instead. Small change pattern needs to be applied to all target translate.c. This brings us closer to making disas.o a common-obj and less architecture specific in general. Cc: Richard Henderson <rth@twiddle.net> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Michael Walle <michael@walle.cc> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: Jia Liu <proljc@gmail.com> Cc: Alexander Graf <agraf@suse.de> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-06-22monitor: Split mon_get_cpu fn to remove ENV_GET_CPUPeter Crosthwaite1-36/+29
The monitor currently has one helper, mon_get_cpu() which will return an env pointer. The target specific users of this API want an env, but all the target agnostic users really just want the cpu pointer. These users then need to use the target-specifically defined ENV_GET_CPU to navigate back up to the CPU from the ENV. Split the API for the two uses cases to remove all need for ENV_GET_CPU. Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-06-22monitor: Fix failure path for "S" argumentBandan Das1-1/+1
Since the "S" argument type is only used with the "?" flag, the bug can't bite. Signed-off-by: Bandan Das <bsd@redhat.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-06-22monitor: Point to "help" command on syntax errorBandan Das1-0/+2
When a command fails due to incorrect syntax or input, suggest using the "help" command to get more information about the command. This is only applicable for HMP. Signed-off-by: Bandan Das <bsd@redhat.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-06-22monitor: cleanup parsing of cmd name and cmd argumentsBandan Das1-40/+56
There's too much going on in monitor_parse_command(). Split up the arguments parsing bits into a separate function monitor_parse_arguments(). Let the original function check for command validity and sub-commands if any and return data (*cmd) that the newly introduced function can process and return a QDict. Also, pass a pointer to the cmdline to track current parser location. Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Bandan Das <bsd@redhat.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-06-22monitor: remove debug printsBandan Das1-19/+1
The preferred solution is to use tracepoints and there is good chance of bitrot with the debug prints not being enabled at compile time. Remove them. Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Bandan Das <bsd@redhat.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-06-22qobject: Use 'bool' inside qdictEric Blake6-28/+28
Now that qbool is fixed, let's fix getting and setting a bool value to a qdict member to also use C99 bool rather than int. I audited all callers to ensure that the changed return type will not cause any changed semantics. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-06-22qobject: Use 'bool' for qboolEric Blake16-38/+39
We require a C99 compiler, so let's use 'bool' instead of 'int' when dealing with boolean values. There are few enough clients to fix them all in one pass. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Alberto Garcia <berto@igalia.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-06-22Merge remote-tracking branch 'remotes/afaerber/tags/qom-devices-for-peter' ↵Peter Maydell28-125/+837
into staging QOM infrastructure fixes and device conversions * Changes to name string ownership for alias properties * Improvements around enum properties * Cleanups around -object handling * New helper functions * Cleanups of qdev init helper functions * Add path argument to qom-tree script * QTest cleanup to use new qtest_add_data_func() consistently # gpg: Signature made Fri Jun 19 18:14:38 2015 BST using RSA key ID 3E7E013F # gpg: Good signature from "Andreas Färber <afaerber@suse.de>" # gpg: aka "Andreas Färber <afaerber@suse.com>" * remotes/afaerber/tags/qom-devices-for-peter: qdev: Un-deprecate qdev_init_nofail() qdev: Deprecated qdev_init() is finally unused, drop qom: Don't pass string table to object_get_enum() function qom: Add an object_property_add_enum() helper function qom: Make enum string tables const-correct qom: Add object_new_with_props() / object_new_withpropv() helpers qom: Add helper function for getting user objects root vl: Create (most) objects before creating chardev backends doc: Document user creatable object types in help text backends: Fix typename of 'policy' enum property in hostmem obj scripts: Add support for path as argument of qom-tree tests: Use qtest_add_data_func() consistently qdev: Free property names after registering gpio aliases qom: strdup() target property name on object_property_add_alias() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-22Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell16-23/+485
* i8254 security fix * Avoid long 100% CPU wait after restarting guests that use the periodic timer * Fixes for access clamping (WinXP, MIPS) * wixl/.msi support for qemu-ga on Windows # gpg: Signature made Fri Jun 19 11:30:53 2015 BST using RSA key ID 78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: exec: clamp accesses against the MemoryRegionSection exec: do not clamp accesses to MMIO regions mc146818rtc: Reset the periodic timer on load qemu-timer: Call clock reset notifiers on forward jumps tests: virtio-scsi: Add test for unaligned WRITE SAME tests: virtio-scsi: Move start/stop to individual test functions libqos: Complete virtio device ID definition list libqos: Allow calling guest_free on NULL pointer tests: Link libqos virtio object to virtio-scsi-test i8254: fix out-of-bounds memory access in pit_ioport_read() qemu-ga: Building Windows MSI installation with configure/Makefile qemu-ga: Introduce Windows MSI script qemu-ga: debug printouts to help troubleshoot installation qemu-ga: adding vss-[un]install options qemu-log: Open file for logging when specified Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-21target-microblaze: Remove dead codeAlistair Francis1-4/+0
This code is already being run in the mb_cpu_realizefn() function. As PVR registers are preserved on reset this code is not required. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2015-06-21s3adsp1800: Remove the hardcoded values from the resetAlistair Francis1-8/+1
Remove the hardcoded values from the machine specific reset function, as the same values are already set in the standard MicroBlaze reset. This also allows the entire reset function to be deleted, as PVR registers are now preserved on reset. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2015-06-21ml605_mmu: Move the hardcoded values to the init functionAlistair Francis1-12/+6
Move the hard coded register values to the init function. This also allows the entire reset function to be deleted, as PVR registers are now preserved on reset. The hardcoded PVR0 values can be removed as they are setting the endianness and stack protection, which is already done or invalid. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2015-06-21target-microblaze: Convert pvr-full to a CPU propertyAlistair Francis4-6/+10
Originally the pvr-full PVR bits were manually set for each machine. This is a hassle and difficult to read, instead set them based on the CPU properties. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2015-06-21target-microblaze: Convert version_mask to a CPU propertyAlistair Francis3-2/+55
Originally the version_mask PVR bits were manually set for each machine. This is a hassle and difficult to read, instead set them based on the CPU properties. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2015-06-21target-microblaze: Convert endi to a CPU propertyAlistair Francis4-3/+6
Originally the endi PVR bits were manually set for each machine. This is a hassle and difficult to read, instead set them based on the CPU properties. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2015-06-21target-microblaze: Convert dcache-writeback to a CPU propertyAlistair Francis3-1/+8
Originally the dcache-writeback PVR bits were manually set for each machine. This is a hassle and difficult to read, instead set them based on the CPU properties. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2015-06-21target-microblaze: Convert use-mmu to a CPU propertyAlistair Francis4-4/+6
Originally the use-mmu PVR bits were manually set for each machine. This is a hassle and difficult to read, instead set them based on the CPU properties. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2015-06-21target-microblaze: Rename the usefpu variableAlistair Francis3-8/+8
Rename the usefpu variable to use_fpu. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2015-06-21target-microblaze: Disable stack protection by defaultAlistair Francis1-1/+1
Stack protection is not available when the MMU is enabled. As the MMU is enabled by default, disable stack protection by default. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2015-06-21target-microblaze: Convert use-fpu to a CPU propertyAlistair Francis4-12/+19
Originally the use-fpu PVR bits were manually set for each machine. This is a hassle and difficult to read, instead set them based on the CPU properties. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2015-06-21target-microblaze: Tidy up the base-vectors propertyAlistair Francis3-7/+8
Rename the "xlnx.base-vectors" string to "base-vectors" and move the base_vectors variable into the cfg struct. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2015-06-21target-microblaze: Allow the stack protection to be disabledAlistair Francis4-2/+13
Microblaze stack protection is configurable and isn't always enabled. This patch allows the stack protection to be disabled from the CPU properties. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2015-06-21target-microblaze: Preserve the pvr registers during resetAlistair Francis2-22/+28
Move the Microblaze PVR registers to the end of the CPUMBState and preserve them during reset. This is similar to what the QEMU ARM model does with some of it's registers. This allows the Microblaze PVR registers to only be set once at realise instead of constantly at reset. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2015-06-21target-microblaze: Fix up indentationAlistair Francis1-5/+5
Fix up the incorrect indentation level in the helper_stackprot() function. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2015-06-21microblaze: s3adsp: Instantiate CPU using QOMPeter Crosthwaite1-6/+2
Instantiate and realise the CPU directly, rather than using cpu_mb_init. Microblazes cpu_model argument is a dummy so remove the default cpu_model set logic. Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2015-06-19qdev: Un-deprecate qdev_init_nofail()Markus Armbruster1-2/+2
It's a perfectly sensible helper function. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-06-19qdev: Deprecated qdev_init() is finally unused, dropMarkus Armbruster2-33/+17
qdev_init() is a wrapper around setting property "realized" to true, plus error handling that passes errors to qerror_report_err(). qerror_report_err() is a transitional interface to help with converting existing monitor commands to QMP. It should not be used elsewhere. All code has been modernized to avoid qdev_init() and its inappropriate error handling. We can finally drop it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-06-19qom: Don't pass string table to object_get_enum() functionDaniel P. Berrange5-19/+71
Now that properties can be explicitly registered as an enum type, there is no need to pass the string table to the object_get_enum() function. The object property registration already has a pointer to the string table. In changing this method signature, the hostmem backend object has to be converted to use the new enum property registration code, which simplifies it somewhat. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-06-19qom: Add an object_property_add_enum() helper functionDaniel P. Berrange3-0/+150
A QOM property can be parsed as enum using the visit_type_enum() helper function, but this forces callers to use the more complex generic object_property_add() method when registering it. It also requires that users of that object have access to the string map when they want to read the property value. This patch introduces a specialized object_property_add_enum() method which simplifies the use of enum properties, so the setters/getters directly get passed the int value. typedef enum { MYDEV_TYPE_FROG, MYDEV_TYPE_ALLIGATOR, MYDEV_TYPE_PLATYPUS, MYDEV_TYPE_LAST } MyDevType; Then provide a table of enum <-> string mappings static const char *const mydevtypemap[MYDEV_TYPE_LAST + 1] = { [MYDEV_TYPE_FROG] = "frog", [MYDEV_TYPE_ALLIGATOR] = "alligator", [MYDEV_TYPE_PLATYPUS] = "platypus", [MYDEV_TYPE_LAST] = NULL, }; Assuming an object struct of typedef struct { Object parent_obj; MyDevType devtype; ...other fields... } MyDev; The property can then be registered as follows: static int mydev_prop_get_devtype(Object *obj, Error **errp G_GNUC_UNUSED) { MyDev *dev = MYDEV(obj); return dev->devtype; } static void mydev_prop_set_devtype(Object *obj, int value, Error **errp G_GNUC_UNUSED) { MyDev *dev = MYDEV(obj); dev->devtype = value; } object_property_add_enum(obj, "devtype", mydevtypemap, "MyDevType", mydev_prop_get_devtype, mydev_prop_set_devtype, NULL); Note there is no need to check the range of 'value' in the setter, because the string->enum conversion code will have already done that and reported an error as required. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-06-19qom: Make enum string tables const-correctDaniel P. Berrange10-15/+16
The enum string table parameters in various QOM/QAPI methods are declared 'const char *strings[]'. This results in const warnings if passed a variable that was declared as static const char * const strings[] = { .... }; Add the extra const annotation to the parameters, since neither the string elements, nor the array itself should ever be modified. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-06-19qom: Add object_new_with_props() / object_new_withpropv() helpersDaniel P. Berrange6-1/+434
It is reasonably common to want to create an object, set a number of properties, register it in the hierarchy and then mark it as complete (if a user creatable type). This requires quite a lot of error prone, verbose, boilerplate code to achieve. First a pair of functions object_set_props() / object_set_propv() are added which allow for a list of objects to be set in one single API call. Then object_new_with_props() / object_new_with_propv() constructors are added which simplify the sequence of calls to create an object, populate properties, register in the object composition tree and mark the object complete, into a single method call. Usage would be: Error *err = NULL; Object *obj; obj = object_new_with_propv(TYPE_MEMORY_BACKEND_FILE, object_get_objects_root(), "hostmem0", &err, "share", "yes", "mem-path", "/dev/shm/somefile", "prealloc", "yes", "size", "1048576", NULL); Note all property values are passed in string form and will be parsed into their required data types, using normal QOM semantics for parsing from string format. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-06-19qom: Add helper function for getting user objects rootDaniel P. Berrange5-7/+22
Add object_get_objects_root() function which is a convenience for obtaining the Object * located at /objects in the object composition tree. Convert existing code over to use the new API where appropriate. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-06-19vl: Create (most) objects before creating chardev backendsDaniel P. Berrange1-1/+39
Some types of object must be created before chardevs, other types of object must be created after chardevs. As such there is no option but to create objects in two phases. This takes the decision to create as many object types as possible right away before anyother backends are created, and only delay creation of those few which have an explicit dependency on the chardevs. Hopefully the set which need delaying will remain small over time. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-06-19doc: Document user creatable object types in help textDaniel P. Berrange1-16/+54
The QEMU help for -object is essentially useless, just giving users the generic syntax. Move it down into its own section and introduce a nested table where each user creatable object can be documented. The existing memory-backend-file, rng-random and rng-egd object types are documented. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-06-19backends: Fix typename of 'policy' enum property in hostmem objDaniel P. Berrange1-1/+1
The 'policy' property was being registered with a typename of 'str', but it is in fact an enum of the 'HostMemPolicy' type. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-06-19Merge remote-tracking branch ↵Peter Maydell21-97/+770
'remotes/pmaydell/tags/pull-target-arm-20150619' into staging target-arm queue: * support --semihosting-config,arg=value * Cortex-R5 support (including implementing them on the Zynq board) * Cortex-M4 support (without FPU) * enable vfio-calxeda-xgmac * don't reset ALIAS sysregs # gpg: Signature made Fri Jun 19 14:41:54 2015 BST using RSA key ID 14360CDE # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" * remotes/pmaydell/tags/pull-target-arm-20150619: semihosting: add --semihosting-config arg sub-argument semihosting: create SemihostingConfig structure and semihost.h arm: xlnx-zynqmp: Add 2xCortexR5 CPUs arm: xlnx-zynqmp: Add boot-cpu property arm: xlnx-zynqmp: Preface CPU variables with "apu" target-arm: Add support for Cortex-R5 target-arm: Implement PMSAv7 MPU target-arm: Add registers for PMSAv7 target-arm/helper.c: define MPUIR register target-arm: Do not reset sysregs marked as ALIAS hw/arm/sysbus-fdt: enable vfio-calxeda-xgmac dynamic instantiation target-arm: Add the Cortex-M4 CPU Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-19semihosting: add --semihosting-config arg sub-argumentLeon Alrae4-12/+103
Add new "arg" sub-argument to the --semihosting-config allowing the user to pass multiple input arguments separately. It is required for example by UHI semihosting to construct argc and argv. Also, update ARM semihosting to support new option (at the moment it is the only target which cares about arguments). If the semihosting is enabled and no semihosting args have been specified, then fall back to -kernel/-append. The -append string is split on whitespace before initializing semihosting.argv[1..n]; this is different from what QEMU MIPS machines' pseudo-bootloaders do (i.e. argv[1] contains the whole -append), but is more intuitive from UHI user's point of view and Linux kernel just does not care as it concatenates argv[1..n] into single cmdline string anyway. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Message-id: 1434643256-16858-3-git-send-email-leon.alrae@imgtec.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.1 (git 2.18.0) at 2024-07-06 10:48:02 +0000