summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2017-02-23util/cutils: Return qemu_strtosz*() error and value separatelyMarkus Armbruster10-77/+119
This makes qemu_strtosz(), qemu_strtosz_mebi() and qemu_strtosz_metric() similar to qemu_strtoi64(), except negative values are rejected. Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> (maintainer:X86) Cc: Kevin Wolf <kwolf@redhat.com> (supporter:Block layer core) Cc: Max Reitz <mreitz@redhat.com> (supporter:Block layer core) Cc: qemu-block@nongnu.org (open list:Block layer core) Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <1487708048-2131-23-git-send-email-armbru@redhat.com>
2017-02-23util/cutils: Let qemu_strtosz*() optionally reject trailing crapMarkus Armbruster8-31/+25
Change the qemu_strtosz() & friends to return -EINVAL when @endptr is null and the conversion doesn't consume the string completely. Matches how qemu_strtol() & friends work. Only test_qemu_strtosz_simple() passes a null @endptr. No functional change there, because its conversion consumes the string. Simplify callers that use @endptr only to fail when it doesn't point to '\0' to pass a null @endptr instead. Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> (maintainer:X86) Cc: Kevin Wolf <kwolf@redhat.com> (supporter:Block layer core) Cc: Max Reitz <mreitz@redhat.com> (supporter:Block layer core) Cc: qemu-block@nongnu.org (open list:Block layer core) Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <1487708048-2131-22-git-send-email-armbru@redhat.com>
2017-02-23qemu-img: Wrap cvtnum() around qemu_strtosz()Markus Armbruster1-27/+31
Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: qemu-block@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1487708048-2131-21-git-send-email-armbru@redhat.com>
2017-02-23test-cutils: Drop suffix from test_qemu_strtosz_simple()Markus Armbruster1-4/+4
Leave testing unit suffixes to test_qemu_strtosz_units(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1487708048-2131-20-git-send-email-armbru@redhat.com>
2017-02-23test-cutils: Use qemu_strtosz() more oftenMarkus Armbruster1-17/+17
Use qemu_strtosz() instead of qemu_strtosz_MiB() where it doesn't really make a difference. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1487708048-2131-19-git-send-email-armbru@redhat.com>
2017-02-23util/cutils: Drop QEMU_STRTOSZ_DEFSUFFIX_* macrosMarkus Armbruster1-18/+10
Writing QEMU_STRTOSZ_DEFSUFFIX_* instead of '*' gains nothing. Get rid of these eyesores. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1487708048-2131-18-git-send-email-armbru@redhat.com>
2017-02-23util/cutils: New qemu_strtosz()Markus Armbruster6-41/+30
Most callers of qemu_strtosz_suffix() pass QEMU_STRTOSZ_DEFSUFFIX_B. Capture the pattern in new qemu_strtosz(). Inline qemu_strtosz_suffix() into its only remaining caller. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1487708048-2131-17-git-send-email-armbru@redhat.com>
2017-02-23util/cutils: Rename qemu_strtosz() to qemu_strtosz_MiB()Markus Armbruster6-24/+24
With qemu_strtosz(), no suffix means mebibytes. It's used rarely. I'm going to add a similar function where no suffix means bytes. Rename qemu_strtosz() to qemu_strtosz_MiB() to make the name qemu_strtosz() available for the new function. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1487708048-2131-16-git-send-email-armbru@redhat.com>
2017-02-23util/cutils: New qemu_strtosz_metric()Markus Armbruster4-14/+17
To parse numbers with metric suffixes, we use qemu_strtosz_suffix_unit(nptr, &eptr, QEMU_STRTOSZ_DEFSUFFIX_B, 1000) Capture this in a new function for legibility: qemu_strtosz_metric(nptr, &eptr) Replace test_qemu_strtosz_suffix_unit() by test_qemu_strtosz_metric(). Rename qemu_strtosz_suffix_unit() to do_strtosz() and give it internal linkage. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1487708048-2131-15-git-send-email-armbru@redhat.com>
2017-02-23test-cutils: Cover qemu_strtosz() around range limitsMarkus Armbruster1-2/+59
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1487708048-2131-14-git-send-email-armbru@redhat.com>
2017-02-23test-cutils: Cover qemu_strtosz() with trailing crapMarkus Armbruster1-0/+19
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1487708048-2131-13-git-send-email-armbru@redhat.com>
2017-02-23test-cutils: Cover qemu_strtosz() invalid inputMarkus Armbruster1-0/+24
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1487708048-2131-12-git-send-email-armbru@redhat.com>
2017-02-23test-cutils: Add missing qemu_strtosz()... endptr checksMarkus Armbruster1-11/+26
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1487708048-2131-11-git-send-email-armbru@redhat.com>
2017-02-23option: Fix to reject invalid and overflowing numbersMarkus Armbruster2-14/+16
parse_option_number() fails to check for these errors after strtoull(). Has always been broken. Fix that. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1487708048-2131-10-git-send-email-armbru@redhat.com>
2017-02-23util/cutils: Clean up control flow around qemu_strtol() a bitMarkus Armbruster1-42/+43
Reorder check_strtox_error() to make it obvious that we always store through a non-null @endptr. Transform if (some error) { error case ... err = value for error case; } else { normal case ... err = value for normal case; } return err; to if (some error) { error case ... return value for error case; } normal case ... return value for normal case; Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1487708048-2131-9-git-send-email-armbru@redhat.com>
2017-02-23util/cutils: Clean up variable names around qemu_strtol()Markus Armbruster1-21/+21
Name same things the same, different things differently. * qemu_strtol()'s parameter @nptr is called @p in check_strtox_error(). Rename the latter. * qemu_strtol()'s parameter @endptr is called @next in check_strtox_error(). Rename the latter. * qemu_strtol()'s variable @p is called @endptr in check_strtox_error(). Rename both to @ep. * qemu_strtol()'s variable @err is *negative* errno, check_strtox_error()'s parameter @err is *positive*. Rename the latter to @libc_errno. Same for qemu_strtoul(), qemu_strtoi64(), qemu_strtou64(), of course. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1487708048-2131-8-git-send-email-armbru@redhat.com>
2017-02-23util/cutils: Rename qemu_strtoll(), qemu_strtoull()Markus Armbruster6-193/+225
The name qemu_strtoll() suggests conversion to long long, but it actually converts to int64_t. Rename to qemu_strtoi64(). The name qemu_strtoull() suggests conversion to unsigned long long, but it actually converts to uint64_t. Rename to qemu_strtou64(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1487708048-2131-7-git-send-email-armbru@redhat.com>
2017-02-23util/cutils: Rewrite documentation of qemu_strtol() & friendsMarkus Armbruster1-39/+49
Fixes the following documentation bugs: * Fails to document that null @nptr is safe. * Fails to document that we return -EINVAL when no conversion could be performed (commit 47d4be1). * Confuses long long with int64_t, and unsigned long long with uint64_t. * Claims the unsigned conversions can underflow. They can't. While there, mark problematic assumptions that int64_t is long long, and uint64_t is unsigned long long with FIXME comments. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1487708048-2131-6-git-send-email-armbru@redhat.com>
2017-02-23test-cutils: Clean up qemu_strtoul() result checksMarkus Armbruster1-30/+30
Use unsigned comparisons to check the result of qemu_strtoul() and strtoull(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1487708048-2131-5-git-send-email-armbru@redhat.com>
2017-02-23test-cutils: Add missing qemu_strtol()... endptr checksMarkus Armbruster1-0/+12
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1487708048-2131-4-git-send-email-armbru@redhat.com>
2017-02-23option: Assert value string isn't nullMarkus Armbruster1-50/+39
Plenty of code relies on QemuOpt member @str not being null, including qemu_opts_print(), qemu_opts_to_qdict(), and callbacks passed to qemu_opt_foreach(). Begs the question whether it can be null. Only opt_set() creates QemuOpt. It sets member @str to its argument @value. Passing null for @value would plant a time bomb. Callers: * opts_do_parse() can't pass null. * qemu_opt_set() passes its argument @value. Callers: - qemu_opts_from_qdict_1() can't pass null - qemu_opts_set() passes its argument @value, but none of its callers pass null. - Many more outside qemu-option.c, but they shouldn't pass null, either. Assert member @str isn't null, so that misuse is caught right away. Simplify parse_option_bool(), parse_option_number() and parse_option_size() accordingly. Best viewed with whitespace changes ignored. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1487708048-2131-3-git-send-email-armbru@redhat.com>
2017-02-23test-qemu-opts: Cover qemu_opts_parse()Markus Armbruster1-2/+328
The new tests demonstrate a few bugs, all clearly marked. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1487708048-2131-2-git-send-email-armbru@redhat.com> [A few additional test cases squashed in, see Message-ID: <871supjijq.fsf@dusky.pond.sub.org>]
2017-02-23Merge remote-tracking branch 'remotes/yongbok/tags/mips-20170222' into stagingPeter Maydell20-35/+1424
MIPS patches 2017-02-22 Changes: * Add MIPS Boston board support # gpg: Signature made Wed 22 Feb 2017 00:08:00 GMT # gpg: using RSA key 0x2238EB86D5F797C2 # gpg: Good signature from "Yongbok Kim <yongbok.kim@imgtec.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 8600 4CF5 3415 A5D9 4CFA 2B5C 2238 EB86 D5F7 97C2 * remotes/yongbok/tags/mips-20170222: hw/mips: MIPS Boston board support hw: xilinx-pcie: Add support for Xilinx AXI PCIe Controller loader: Support Flattened Image Trees (FIT images) dtc: Update requirement to v1.4.2 target-mips: Provide function to test if a CPU supports an ISA hw/mips_gic: Update pin state on mask changes hw/mips_gictimer: provide API for retrieving frequency hw/mips_cmgcr: allow GCR base to be moved Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-21hw/mips: MIPS Boston board supportPaul Burton4-1/+582
Introduce support for emulating the MIPS Boston development board. The Boston board is built around an FPGA & 3 PCIe controllers, one of which is connected to an Intel EG20T Platform Controller Hub. It is used during the development & debug of new CPUs and the software intended to run on them, and is essentially the successor to the older MIPS Malta board. This patch does not implement the EG20T, instead connecting an already supported ICH-9 AHCI controller. Whilst this isn't accurate it's enough for typical stock Boston software (eg. Linux kernels) to work with hard disks given that both the ICH-9 & EG20T implement the AHCI specification. Boston boards typically boot kernels in the FIT image format, and this patch will treat kernels provided to QEMU as such. When loading a kernel directly, the board code will generate minimal firmware much as the Malta board code does. This firmware will set up the CM, CPC & GIC register base addresses then set argument registers & jump to the kernel entry point. Alternatively, bootloader code may be loaded using the bios argument in which case no firmware will be generated & execution will proceed from the start of the boot code at the default MIPS boot exception vector (offset 0x1fc00000 into (c)kseg1). Currently real Boston boards are always used with FPGA bitfiles that include a Global Interrupt Controller (GIC), so the interrupt configuration is only defined for such cases. Therefore the board will only allow use of CPUs which implement the CPS components, including the GIC, and will otherwise exit with a message. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com> [yongbok.kim@imgtec.com: isolated boston machine support for mips64el. updated for recent Chardev changes. ignore missing bios/kernel for qtest. added default -drive to if=ide explicitly] Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-02-21hw: xilinx-pcie: Add support for Xilinx AXI PCIe ControllerPaul Burton3-0/+397
Add support for emulating the Xilinx AXI Root Port Bridge for PCI Express as described by Xilinx' PG055 document. This is a PCIe controller that can be used with certain series of Xilinx FPGAs, and is used on the MIPS Boston board which will make use of this code. Signed-off-by: Paul Burton <paul.burton@imgtec.com> [yongbok.kim@imgtec.com: removed returning on !level, updated IRQ connection with GPIO logic, moved xilinx_pcie_init() to boston.c replaced stw_le_p() with pci_set_word() and other cosmetic changes] Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-02-21loader: Support Flattened Image Trees (FIT images)Paul Burton5-6/+374
Introduce support for loading Flattened Image Trees, as used by modern U-Boot. FIT images are essentially flattened device tree files which contain binary images such as kernels, FDTs or ramdisks along with one or more configuration nodes describing boot configurations. The MIPS Boston board typically boots kernels in the form of FIT images, and will make use of this code. Signed-off-by: Paul Burton <paul.burton@imgtec.com> [yongbok.kim@imgtec.com: fixed potential memory leaks, isolated building option] Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-02-21dtc: Update requirement to v1.4.2Paul Burton2-3/+3
In order to obtain fdt_first_subnode & fdt_next_subnode symbols from libfdt for use by a later patch, bump the requirement for dtc to v1.4.2 & the submodule to that same version. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-02-21target-mips: Provide function to test if a CPU supports an ISAPaul Burton2-0/+11
Provide a new cpu_supports_isa function which allows callers to determine whether a CPU supports one of the ISA_ flags, by testing whether the associated struct mips_def_t sets the ISA flags in its insn_flags field. An example use of this is to allow boards which generate bootloader code to determine the properties of the CPU that will be used, for example whether the CPU is 64 bit or which architecture revision it implements. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-02-21hw/mips_gic: Update pin state on mask changesPaul Burton1-25/+31
If the GIC interrupt mask is changed by a write to the smask (set mask) or rmask (reset mask) registers, we need to re-evaluate the state of the pins/IRQs fed to the CPU. Without doing so we risk leaving a pin high despite the interrupt that led to that state being masked, or losing interrupts if an already pending interrupt is unmasked. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-02-21hw/mips_gictimer: provide API for retrieving frequencyPaul Burton2-0/+6
Provide a new function mips_gictimer_get_freq() which returns the frequency at which a GIC timer will count. This will be useful for boards which perform setup based upon this frequency. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-02-21hw/mips_cmgcr: allow GCR base to be movedPaul Burton2-0/+20
Support moving the GCR base address & updating the CPU's CP0 CMGCRBase register appropriately. This is required if a platform needs to move its GCRs away from other memory, as the MIPS Boston development board does to avoid its flash memory. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-02-21Merge remote-tracking branch 'remotes/dgilbert/tags/pull-hmp-20170221' into ↵Peter Maydell9-13/+98
staging HMP pull Note, I had seen a fail in the vhost-user/flags-mismatch on one host in one build, but not others with the same patches; and these patches go nowhere near that, so I think that's a separate vhost-user issue. # gpg: Signature made Tue 21 Feb 2017 18:49:25 GMT # gpg: using RSA key 0x0516331EBC5BFDE7 # gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7 * remotes/dgilbert/tags/pull-hmp-20170221: monitor: Fix crashes when using HMP commands without CPU monitor: add poll-* properties into query-iothreads result hmp: fix block_set_io_throttle Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-21monitor: Fix crashes when using HMP commands without CPUThomas Huth7-10/+73
When running certain HMP commands ("info registers", "info cpustats", "info tlb", "nmi", "memsave" or dumping virtual memory) with the "none" machine, QEMU crashes with a segmentation fault. This happens because the "none" machine does not have any CPUs by default, but these HMP commands did not check for a valid CPU pointer yet. Add such checks now, so we get an error message about the missing CPU instead. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1484309555-1935-1-git-send-email-thuth@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-02-21monitor: add poll-* properties into query-iothreads resultPavel Hrdina3-3/+24
IOthreads were recently extended by new properties that can enable/disable and configure aio polling. This will also allow other tools that uses QEMU to probe for existence of those new properties via query-qmp-schema. Signed-off-by: Pavel Hrdina <phrdina@redhat.com> Message-Id: <3163c16d6ab4257f7be9ad44fe9cc0ce8c359e5a.1486718555.git.phrdina@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-02-21hmp: fix block_set_io_throttleEric Blake1-0/+1
Commit 7a9877a made the 'device' parameter to BlockIOThrottle optional, favoring 'id' instead. But it forgot to update the HMP usage to set has_device, which makes all attempts to change throttling via HMP fail with "Need exactly one of 'device' and 'id'" CC: qemu-stable@nongnu.org Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20170120230359.4244-1-eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-02-21Merge remote-tracking branch 'remotes/cody/tags/block-pull-request' into stagingPeter Maydell4-172/+317
# gpg: Signature made Tue 21 Feb 2017 15:40:05 GMT # gpg: using RSA key 0xBDBE7B27C0DE3057 # gpg: Good signature from "Jeffrey Cody <jcody@redhat.com>" # gpg: aka "Jeffrey Cody <jeff@codyprime.org>" # gpg: aka "Jeffrey Cody <codyprime@gmail.com>" # Primary key fingerprint: 9957 4B4D 3474 90E7 9D98 D624 BDBE 7B27 C0DE 3057 * remotes/cody/tags/block-pull-request: qemu-options: Fix broken sheepdog URL mirror: do not increase offset during initial zero_or_discard phase QAPI: Fix blockdev-add example documentation iscsi: Add blockdev-add support iscsi: Add timeout option iscsi: Add header-digest option iscsi: Add initiator-name option iscsi: Handle -iscsi user/password in bdrv_parse_filename() iscsi: Split URL into individual options Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-21qemu-options: Fix broken sheepdog URLThomas Huth1-1/+1
The sheepdog URL is broken twice: First it uses a duplicated http:// prefix, second the website seems to have moved to https://sheepdog.github.io/sheepdog/ instead. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com>
2017-02-21mirror: do not increase offset during initial zero_or_discard phaseAnton Nefedov1-2/+7
If explicit zeroing out before mirroring is required for the target image, it moves the block job offset counter to EOF, then offset and len counters count the image size twice. There is no harm but stats are confusing, specifically the progress of the operation is always reported as 99% by management tools. The patch skips offset increase for the first "technical" pass over the image. This should not cause any further harm. Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1486045515-8009-1-git-send-email-den@openvz.org CC: Jeff Cody <jcody@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> CC: Max Reitz <mreitz@redhat.com> CC: Eric Blake <eblake@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com>
2017-02-21QAPI: Fix blockdev-add example documentationJeff Cody1-25/+25
Signed-off-by: Jeff Cody <jcody@redhat.com>
2017-02-21iscsi: Add blockdev-add supportKevin Wolf2-10/+79
This adds blockdev-add support for iscsi devices. Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com>
2017-02-21iscsi: Add timeout optionKevin Wolf1-26/+11
This was previously only available with -iscsi. Again, after this patch, the -iscsi option only takes effect if an URL is given. New users are supposed to use the new driver-specific option. All -iscsi options have a corresponding driver-specific option for the iscsi block driver now. Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com>
2017-02-21iscsi: Add header-digest optionKevin Wolf1-24/+15
This was previously only available with -iscsi. Again, after this patch, the -iscsi option only takes effect if an URL is given. New users are supposed to use the new driver-specific option. Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com>
2017-02-21iscsi: Add initiator-name optionKevin Wolf1-17/+15
This was previously only available with -iscsi. Again, after this patch, the -iscsi option only takes effect if an URL is given. New users are supposed to use the new driver-specific option. Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com>
2017-02-21iscsi: Handle -iscsi user/password in bdrv_parse_filename()Kevin Wolf1-34/+44
This splits the logic in the old parse_chap() function into a part that parses the -iscsi options into the new driver-specific options, and another part that actually applies those options (called apply_chap() now). Note that this means that username and password specified with -iscsi only take effect when a URL is provided. This is intentional, -iscsi is a legacy interface only supported for compatibility, new users should use the proper driver-specific options. Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com>
2017-02-21iscsi: Split URL into individual optionsKevin Wolf1-53/+140
This introduces a .bdrv_parse_filename handler for iscsi which parses an URL if given and translates it to individual options. Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com>
2017-02-21Merge remote-tracking branch 'remotes/armbru/tags/pull-block-2017-02-21' ↵Peter Maydell37-97/+137
into staging Changes to -drive without if= and with if=scsi # gpg: Signature made Tue 21 Feb 2017 12:22:35 GMT # gpg: using RSA key 0x3870B400EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-block-2017-02-21: hw/i386: Deprecate -drive if=scsi with PC machine types hw: Deprecate -drive if=scsi with non-onboard HBAs hw/scsi: Concentrate -drive if=scsi auto-create in one place hw: Drop superfluous special checks for orphaned -drive blockdev: Make orphaned -drive fatal blockdev: Improve message for orphaned -drive hw/arm/highbank: Default -drive to if=ide instead of if=scsi hw: Default -drive to if=none instead of scsi when scsi cannot work hw: Default -drive to if=none instead of ide when ide cannot work hw/arm/cubieboard hw/arm/xlnx-ep108: Fix units_per_default_bus hw: Default -drive to if=ide explicitly where it works Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-21hw/i386: Deprecate -drive if=scsi with PC machine typesMarkus Armbruster3-10/+15
The PC machines (pc-q35-* pc-i440fx-* pc-* isapc xenfv) automatically create lsi53c895a SCSI HBAs and SCSI devices to honor -drive if=scsi. For giggles, try -drive if=scsi,bus=25,media=cdrom --- this makes QEMU create 25 of them. lsi53c895a is thoroughly obsolete (PCI Ultra2 SCSI, ca. 2000), and currently has no maintainer in QEMU. megasas is a better choice, except with old OSes that lack drivers. virtio-scsi is a much better choice when you have a driver, but only (newish) Linux comes with one in the box. There is no good default that works for all guests. Encourage users to pick a non-obsolete SCSI HBA that works for them by deprecating -drive if=scsi. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1487161136-9018-4-git-send-email-armbru@redhat.com> Acked-By: Paolo Bonzini <pbonzini@redhat.com>
2017-02-21hw: Deprecate -drive if=scsi with non-onboard HBAsMarkus Armbruster9-7/+35
Block backends defined with "-drive if=T" with T other than "none" are meant to be picked up by machine initialization code: a suitable frontend gets created and wired up automatically. Drives defined with if=scsi are also picked up by SCSI HBAs added with -device, unlike other interface types. Deprecate this usage, as follows. Create the frontends for onboard HBAs in machine initialization code, exactly like we do for if=ide and other interface types. Change scsi_legacy_handle_cmdline() to create a frontend only when it's still missing, and warn that this usage is deprecated. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1487161136-9018-3-git-send-email-armbru@redhat.com>
2017-02-21hw/scsi: Concentrate -drive if=scsi auto-create in one placeMarkus Armbruster10-39/+44
The logic to create frontends for -drive if=scsi is in SCSI HBAs. For all other interface types, it's in machine initialization code. A few machine types create the SCSI HBAs necessary for that. That's also not done for other interface types. I'm going to deprecate these SCSI eccentricities. In preparation for that, create the frontends in main() instead of the SCSI HBAs, by calling new function scsi_legacy_handle_cmdline() there. Note that not all SCSI HBAs create frontends. Take care not to change that. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1487161136-9018-2-git-send-email-armbru@redhat.com> Acked-By: Paolo Bonzini <pbonzini@redhat.com>
2017-02-21hw: Drop superfluous special checks for orphaned -driveMarkus Armbruster3-26/+0
We've traditionally rejected orphans here and there, but not systematically. For instance, the sun4m machines have an onboard SCSI HBA (bus=0), and have always rejected bus>0. Other machines with an onboard SCSI HBA don't. Commit a66c9dc made all orphans trigger a warning, and the previous commit turned this into an error. The checks "here and there" are now redundant. Drop them. Note that the one in mips_jazz.c was wrong: it rejected bus > MAX_FD, but MAX_FD is the number of floppy drives per bus. Error messages change from $ qemu-system-x86_64 -drive if=ide,bus=2 qemu-system-x86_64: Too many IDE buses defined (3 > 2) $ qemu-system-mips64 -M magnum,accel=qtest -drive if=floppy,bus=2,id=fd1 qemu: too many floppy drives $ qemu-system-sparc -M LX -drive if=scsi,bus=1 qemu: too many SCSI bus to $ qemu-system-x86_64 -drive if=ide,bus=2 qemu-system-x86_64: -drive if=ide,bus=2: machine type does not support if=ide,bus=2,unit=0 $ qemu-system-mips64 -M magnum,accel=qtest -drive if=floppy,bus=2,id=fd1 qemu-system-mips64: -drive if=floppy,bus=2,id=fd1: machine type does not support if=floppy,bus=2,unit=0 $ qemu-system-sparc -M LX -drive if=scsi,bus=1 qemu-system-sparc: -drive if=scsi,bus=1: machine type does not support if=scsi,bus=1,unit=0 Cc: John Snow <jsnow@redhat.com> Cc: "Hervé Poussineau" <hpoussin@reactos.org> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1487153147-11530-9-git-send-email-armbru@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com>
generated by cgit v1.2.1 (git 2.18.0) at 2024-07-02 07:58:10 +0000