summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2017-07-11iotests: enable tests 134 and 158 to work with qcow (v1)Daniel P. Berrange2-2/+2
The 138 and 158 iotests exercise the legacy qcow2 aes encryption code path and they work fine with qcow v1 too. Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170623162419.26068-16-berrange@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11qcow2: add iotests to cover LUKS encryption supportDaniel P. Berrange7-2/+255
This extends the 087 iotest to cover LUKS encryption when doing blockdev-add. Two further tests are added to validate read/write of LUKS encrypted images with a single file and with a backing file. Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170623162419.26068-15-berrange@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11qcow2: add support for LUKS encryption formatDaniel P. Berrange6-92/+484
This adds support for using LUKS as an encryption format with the qcow2 file, using the new encrypt.format parameter to request "luks" format. e.g. # qemu-img create --object secret,data=123456,id=sec0 \ -f qcow2 -o encrypt.format=luks,encrypt.key-secret=sec0 \ test.qcow2 10G The legacy "encryption=on" parameter still results in creation of the old qcow2 AES format (and is equivalent to the new 'encryption-format=aes'). e.g. the following are equivalent: # qemu-img create --object secret,data=123456,id=sec0 \ -f qcow2 -o encryption=on,encrypt.key-secret=sec0 \ test.qcow2 10G # qemu-img create --object secret,data=123456,id=sec0 \ -f qcow2 -o encryption-format=aes,encrypt.key-secret=sec0 \ test.qcow2 10G With the LUKS format it is necessary to store the LUKS partition header and key material in the QCow2 file. This data can be many MB in size, so cannot go into the QCow2 header region directly. Thus the spec defines a FDE (Full Disk Encryption) header extension that specifies the offset of a set of clusters to hold the FDE headers, as well as the length of that region. The LUKS header is thus stored in these extra allocated clusters before the main image payload. Aside from all the cryptographic differences implied by use of the LUKS format, there is one further key difference between the use of legacy AES and LUKS encryption in qcow2. For LUKS, the initialiazation vectors are generated using the host physical sector as the input, rather than the guest virtual sector. This guarantees unique initialization vectors for all sectors when qcow2 internal snapshots are used, thus giving stronger protection against watermarking attacks. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170623162419.26068-14-berrange@redhat.com Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11qcow2: extend specification to cover LUKS encryptionDaniel P. Berrange1-0/+103
Update the qcow2 specification to describe how the LUKS header is placed inside a qcow2 file, when using LUKS encryption for the qcow2 payload instead of the legacy AES-CBC encryption Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170623162419.26068-13-berrange@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11qcow2: convert QCow2 to use QCryptoBlock for encryptionDaniel P. Berrange14-186/+263
This converts the qcow2 driver to make use of the QCryptoBlock APIs for encrypting image content, using the legacy QCow2 AES scheme. With this change it is now required to use the QCryptoSecret object for providing passwords, instead of the current block password APIs / interactive prompting. $QEMU \ -object secret,id=sec0,file=/home/berrange/encrypted.pw \ -drive file=/home/berrange/encrypted.qcow2,encrypt.key-secret=sec0 The test 087 could be simplified since there is no longer a difference in behaviour when using blockdev_add with encrypted images for the running vs stopped CPU state. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170623162419.26068-12-berrange@redhat.com Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11qcow2: make qcow2_encrypt_sectors encrypt in placeDaniel P. Berrange3-15/+9
Instead of requiring separate input/output buffers for encrypting data, change qcow2_encrypt_sectors() to assume use of a single buffer, encrypting in place. The current callers all used the same buffer for input/output already. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170623162419.26068-11-berrange@redhat.com Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11qcow: convert QCow to use QCryptoBlock for encryptionDaniel P. Berrange4-108/+158
This converts the qcow driver to make use of the QCryptoBlock APIs for encrypting image content. This is only wired up to permit use of the legacy QCow encryption format. Users who wish to have the strong LUKS format should switch to qcow2 instead. With this change it is now required to use the QCryptoSecret object for providing passwords, instead of the current block password APIs / interactive prompting. $QEMU \ -object secret,id=sec0,file=/home/berrange/encrypted.pw \ -drive file=/home/berrange/encrypted.qcow,encrypt.format=aes,\ encrypt.key-secret=sec0 Though note that running QEMU system emulators with the AES encryption is no longer supported, so while the above syntax is valid, QEMU will refuse to actually run the VM in this particular example. Likewise when creating images with the legacy AES-CBC format qemu-img create -f qcow \ --object secret,id=sec0,file=/home/berrange/encrypted.pw \ -o encrypt.format=aes,encrypt.key-secret=sec0 \ /home/berrange/encrypted.qcow 64M Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170623162419.26068-10-berrange@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11qcow: make encrypt_sectors encrypt in placeDaniel P. Berrange1-30/+15
Instead of requiring separate input/output buffers for encrypting data, change encrypt_sectors() to assume use of a single buffer, encrypting in place. One current caller uses the same buffer for input/output already and the other two callers are easily converted to do so. Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170623162419.26068-9-berrange@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11block: deprecate "encryption=on" in favor of "encrypt.format=aes"Daniel P. Berrange9-123/+191
Historically the qcow & qcow2 image formats supported a property "encryption=on" to enable their built-in AES encryption. We'll soon be supporting LUKS for qcow2, so need a more general purpose way to enable encryption, with a choice of formats. This introduces an "encrypt.format" option, which will later be joined by a number of other "encrypt.XXX" options. The use of a "encrypt." prefix instead of "encrypt-" is done to facilitate mapping to a nested QAPI schema at later date. e.g. the preferred syntax is now qemu-img create -f qcow2 -o encrypt.format=aes demo.qcow2 Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170623162419.26068-8-berrange@redhat.com Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11iotests: skip 048 with qcow which doesn't support resizeDaniel P. Berrange1-1/+1
Test 048 is designed to verify data preservation during an image resize. The qcow (v1) format impl has never supported resize so always fails. Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170623162419.26068-7-berrange@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11iotests: skip 042 with qcow which dosn't support zero sized imagesDaniel P. Berrange1-1/+1
Test 042 is designed to verify operation with zero sized images. Such images are not supported with qcow (v1), so this test has always failed. Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170623162419.26068-6-berrange@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11qcow: require image size to be > 1 for new imagesDaniel P. Berrange1-0/+6
The qcow driver refuses to open images which are less than 2 bytes in size, but will happily create such images. Add a check in the create path to avoid this discrepancy. Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170623162419.26068-5-berrange@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11qcow: document another weakness of qcow AES encryptionDaniel P. Berrange1-3/+16
Document that use of guest virtual sector numbers as the basis for the initialization vectors is a potential weakness, when combined with internal snapshots or multiple images using the same passphrase. This fixes the formatting of the itemized list too. Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170623162419.26068-4-berrange@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11block: add ability to set a prefix for opt namesDaniel P. Berrange2-28/+28
When integrating the crypto support with qcow/qcow2, we don't want to use the bare LUKS option names "hash-alg", "key-secret", etc. We need to namespace them to match the nested QAPI schema. e.g. "encrypt.hash-alg", "encrypt.key-secret" so that they don't clash with any general qcow options at a later date. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170623162419.26068-3-berrange@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11block: expose crypto option names / defs to other driversDaniel P. Berrange2-56/+117
The block/crypto.c defines a set of QemuOpts that provide parameters for encryption. This will also be needed by the qcow/qcow2 integration, so expose the relevant pieces in a new block/crypto.h header. Some helper methods taking QemuOpts are changed to take QDict to simplify usage in other places. Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170623162419.26068-2-berrange@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11Merge remote-tracking branch 'remotes/awilliam/tags/vfio-updates-20170710.0' ↵Peter Maydell4-4/+23
into staging VFIO fixes 2017-07-10 - Don't iterate over non-realized devices (Alex Williamson) - Add PCIe capability version fixup (Alex Williamson) # gpg: Signature made Mon 10 Jul 2017 20:06:11 BST # gpg: using RSA key 0x239B9B6E3BB08B22 # gpg: Good signature from "Alex Williamson <alex.williamson@redhat.com>" # gpg: aka "Alex Williamson <alex@shazbot.org>" # gpg: aka "Alex Williamson <alwillia@redhat.com>" # gpg: aka "Alex Williamson <alex.l.williamson@gmail.com>" # Primary key fingerprint: 42F6 C04E 540B D1A9 9E7B 8A90 239B 9B6E 3BB0 8B22 * remotes/awilliam/tags/vfio-updates-20170710.0: vfio/pci: Fixup v0 PCIe capabilities vfio: Test realized when using VFIOGroup.device_list iterator Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-11build: disable Xen on ARMPaolo Bonzini1-3/+3
While ARM could present the xenpv machine, it does not and trying to enable it breaks compilation. Revert to the previous test which only looked at $target_name, not $cpu. Fixes: 3b6b75506de44c5070639943c30a0ad5850f5d02 Reported-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20170711100049.20513-1-pbonzini@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-10Merge remote-tracking branch ↵Peter Maydell13-77/+138
'remotes/dgilbert/tags/pull-migration-20170710a' into staging Migration pull 2017-07-10 # gpg: Signature made Mon 10 Jul 2017 18:04:57 BST # gpg: using RSA key 0x0516331EBC5BFDE7 # gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7 * remotes/dgilbert/tags/pull-migration-20170710a: migration: Make compression_threads use save/load_setup/cleanup() migration: Convert ram to use new load_setup()/load_cleanup() migration: Create load_setup()/cleanup() methods migration: Rename cleanup() to save_cleanup() migration: Rename save_live_setup() to save_setup() doc: update TYPE_MIGRATION documents doc: add item for "-M enforce-config-section" vl: move global property, migrate init earlier migration: fix handling for --only-migratable Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-10migration: Make compression_threads use save/load_setup/cleanup()Juan Quintela3-14/+8
Once there, be consistent and use compress_thread_{save,load}_{setup,cleanup}. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20170628095228.4661-6-quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-07-10migration: Convert ram to use new load_setup()/load_cleanup()Juan Quintela3-17/+36
Once there, I rename ram_migration_cleanup() to ram_save_cleanup(). Notice that this is the first pass, and I only passed XBZRLE to the new scheme. Moved decoded_buf to inside XBZRLE struct. As a bonus, I don't have to export xbzrle functions from ram.c. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> -- loaded_data pointer was needed because called can change it (dave) spell loaded correctly in comment (dave) Message-Id: <20170628095228.4661-5-quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-07-10migration: Create load_setup()/cleanup() methodsJuan Quintela4-1/+49
We need to do things at load time and at cleanup time. Signed-off-by: Juan Quintela <quintela@redhat.com> -- Move the printing of the error message so we can print the device giving the error. Add call to postcopy stuff Message-Id: <20170628095228.4661-4-quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-07-10migration: Rename cleanup() to save_cleanup()Juan Quintela5-7/+7
We need a cleanup for loads, so we rename here to be consistent. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> -- Rename htab_cleanup to htap_save_cleanup as dave suggestion Message-Id: <20170628095228.4661-3-quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-07-10migration: Rename save_live_setup() to save_setup()Juan Quintela9-14/+14
We are going to use it now for more than save live regions. Once there rename qemu_savevm_state_begin() to qemu_savevm_state_setup(). Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20170628095228.4661-2-quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-07-10doc: update TYPE_MIGRATION documentsPeter Xu1-6/+6
[Peter collected Eduardo's patch comment and formatted into patch] Suggested-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1499242883-2184-5-git-send-email-peterx@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-07-10doc: add item for "-M enforce-config-section"Peter Xu1-0/+6
It's never documented, and now we have one more parameter for it (which obsoletes this one). Document it properly. Suggested-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1499396048-21657-1-git-send-email-peterx@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Removed 'Although now' commit message as per Eduardo's review
2017-07-10vl: move global property, migrate init earlierPeter Xu1-12/+12
Currently drive_init_func() may call migrate_get_current() while the migrate object is still not ready yet at that time. Move the migration object init earlier, along with the global properties, right after acceleration init. This fixes a breakage for iotest 055, which caused an assertion failure. Reported-by: Max Reitz <mreitz@redhat.com> Reported-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Tested-by: QingFeng Hao <haoqf@linux.vnet.ibm.com> Fixes: 3df663 ("migration: move only_migratable to MigrationState") Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1499242883-2184-3-git-send-email-peterx@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-07-10migration: fix handling for --only-migratablePeter Xu3-7/+1
MigrateState object is not ready at that time, so we'll get an assertion. Use qemu_global_option() instead. Reported-by: Eduardo Habkost <ehabkost@redhat.com> Suggested-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Fixes: 3df663e ("migration: move only_migratable to MigrationState") Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1499242883-2184-2-git-send-email-peterx@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-07-10vfio/pci: Fixup v0 PCIe capabilitiesAlex Williamson1-0/+12
Intel 82599 VFs report a PCIe capability version of 0, which is invalid. The earliest version of the PCIe spec used version 1. This causes Windows to fail startup on the device and it will be disabled with error code 10. Our choices are either to drop the PCIe cap on such devices, which has the side effect of likely preventing the guest from discovering any extended capabilities, or performing a fixup to update the capability to the earliest valid version. This implements the latter. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2017-07-10vfio: Test realized when using VFIOGroup.device_list iteratorAlex Williamson4-4/+11
VFIOGroup.device_list is effectively our reference tracking mechanism such that we can teardown a group when all of the device references are removed. However, we also use this list from our machine reset handler for processing resets that affect multiple devices. Generally device removals are fully processed (exitfn + finalize) when this reset handler is invoked, however if the removal is triggered via another reset handler (piix4_reset->acpi_pcihp_reset) then the device exitfn may run, but not finalize. In this case we hit asserts when we start trying to access PCI helpers since much of the PCI state of the device is released. To resolve this, add a pointer to the Object DeviceState in our common base-device and skip non-realized devices as we iterate. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2017-07-10Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2017-07-10-v2' ↵Peter Maydell7-260/+323
into staging nbd patches for 2017-07-10 - Eric Blake: MAINTAINERS: Promote NBD to supported, with new maintainer - Vladimir Sementsov-Ogievskiy: [00/10] nbd refactoring part 2 # gpg: Signature made Mon 10 Jul 2017 15:59:18 BST # gpg: using RSA key 0xA7A16B4A2527436A # gpg: Good signature from "Eric Blake <eblake@redhat.com>" # gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" # gpg: aka "[jpeg image of size 6874]" # Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A * remotes/ericb/tags/pull-nbd-2017-07-10-v2: nbd: use generic trace subsystem instead of TRACE macro nbd: refactor tracing nbd/server: rename clientflags var in nbd_negotiate_options nbd/server: fix TRACE in nbd_negotiate_send_rep_len nbd/client: refactor TRACE of NBD_MAGIC nbd/common: nbd_tls_handshake: remove extra TRACE nbd/server: add errp to nbd_send_reply() nbd/server: use errp instead of LOG nbd/server: refactor nbd_negotiate nbd/server: nbd_negotiate: return 1 on NBD_OPT_ABORT MAINTAINERS: Promote NBD to supported, with new maintainer Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-10nbd: use generic trace subsystem instead of TRACE macroVladimir Sementsov-Ogievskiy5-95/+120
Let NBD use the trace mechanisms already present in qemu. Now you can use the -trace optino of qemu, or the -T/--trace option of qemu-img, qemu-io, and qemu-nbd, to select nbd traces. For qemu, the QMP commands trace-event-{get,set}-state can also toggle tracing on the fly. Example: qemu-nbd --trace 'nbd_*' <image file> # enables all nbd traces Recompilation with CFLAGS=-DDEBUG_NBD is no more needed, furthermore, DEBUG_NBD macro is removed from the code. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20170707152918.23086-11-vsementsov@virtuozzo.com> [eblake: minor tweaks to a couple of traces] Signed-off-by: Eric Blake <eblake@redhat.com>
2017-07-10nbd: refactor tracingVladimir Sementsov-Ogievskiy2-24/+9
Reorganize traces: move, reword, add information, drop extra ones. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20170707152918.23086-10-vsementsov@virtuozzo.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2017-07-10nbd/server: rename clientflags var in nbd_negotiate_optionsVladimir Sementsov-Ogievskiy1-19/+19
Rename 'clientflags' to just 'option'. This variable has nothing to do with flags, but is a single integer representing the option requested by the client. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20170707152918.23086-9-vsementsov@virtuozzo.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2017-07-10nbd/server: fix TRACE in nbd_negotiate_send_rep_lenVladimir Sementsov-Ogievskiy1-1/+1
Fix wrong order of TRACE arguments. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20170707152918.23086-8-vsementsov@virtuozzo.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2017-07-10nbd/client: refactor TRACE of NBD_MAGICVladimir Sementsov-Ogievskiy1-9/+2
We are going to switch from TRACE macro to trace points, this TRACE complicates things, this patch simplifies it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20170707152918.23086-7-vsementsov@virtuozzo.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2017-07-10nbd/common: nbd_tls_handshake: remove extra TRACEVladimir Sementsov-Ogievskiy1-3/+1
Error is propagated to the caller, TRACE is not needed. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20170707152918.23086-6-vsementsov@virtuozzo.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2017-07-10nbd/server: add errp to nbd_send_reply()Vladimir Sementsov-Ogievskiy1-8/+9
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20170707152918.23086-5-vsementsov@virtuozzo.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2017-07-10nbd/server: use errp instead of LOGVladimir Sementsov-Ogievskiy1-106/+160
Move to modern errp scheme from just LOGging errors. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20170707152918.23086-4-vsementsov@virtuozzo.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2017-07-10nbd/server: refactor nbd_negotiateVladimir Sementsov-Ogievskiy1-9/+3
Combine two successive "if (oldStyle) {...} else {...}" into one. Block "if (client->tlscreds)" under "if (oldStyle)" is unreachable, as we have "oldStyle = client->exp != NULL && !client->tlscreds;". So, delete this block. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20170707152918.23086-3-vsementsov@virtuozzo.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2017-07-10nbd/server: nbd_negotiate: return 1 on NBD_OPT_ABORTVladimir Sementsov-Ogievskiy1-5/+15
Separate the case when a client sends NBD_OPT_ABORT from all other errors. It will be needed for the following patch, where errors will be reported. This particular case is not actually an error - it honestly follows the NBD protocol. Therefore it should not be reported like an error. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20170707152918.23086-2-vsementsov@virtuozzo.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2017-07-10MAINTAINERS: Promote NBD to supported, with new maintainerEric Blake1-9/+12
We are promising more than just odd fixes, and Paolo is hoping to offload the pull requests to me. Also, enough of NBD is related to the block layer that it is worth including qemu-block on patches. While at it, include blockdev-nbd.c and qemu-nbd.texi in the set of maintained files. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20170707182151.29872-1-eblake@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-10Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell25-1559/+1675
Block layer patches # gpg: Signature made Mon 10 Jul 2017 12:26:44 BST # gpg: using RSA key 0x7F09B272C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * remotes/kevin/tags/for-upstream: (40 commits) block: Make bdrv_is_allocated_above() byte-based block: Minimize raw use of bds->total_sectors block: Make bdrv_is_allocated() byte-based backup: Switch backup_run() to byte-based backup: Switch backup_do_cow() to byte-based backup: Switch block_backup.h to byte-based backup: Switch BackupBlockJob to byte-based block: Drop unused bdrv_round_sectors_to_clusters() mirror: Switch mirror_iteration() to byte-based mirror: Switch mirror_do_read() to byte-based mirror: Switch mirror_cow_align() to byte-based mirror: Update signature of mirror_clip_sectors() mirror: Switch mirror_do_zero_or_discard() to byte-based mirror: Switch MirrorBlockJob to byte-based commit: Switch commit_run() to byte-based commit: Switch commit_populate() to byte-based stream: Switch stream_run() to byte-based stream: Drop reached_end for stream_complete() stream: Switch stream_populate() to byte-based trace: Show blockjob actions via bytes, not sectors ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-10block: Make bdrv_is_allocated_above() byte-basedEric Blake7-56/+65
We are gradually moving away from sector-based interfaces, towards byte-based. In the common case, allocation is unlikely to ever use values that are not naturally sector-aligned, but it is possible that byte-based values will let us be more precise about allocation at the end of an unaligned file that can do byte-based access. Changing the signature of the function to use int64_t *pnum ensures that the compiler enforces that all callers are updated. For now, the io.c layer still assert()s that all callers are sector-aligned, but that can be relaxed when a later patch implements byte-based block status. Therefore, for the most part this patch is just the addition of scaling at the callers followed by inverse scaling at bdrv_is_allocated(). But some code, particularly stream_run(), gets a lot simpler because it no longer has to mess with sectors. Leave comments where we can further simplify by switching to byte-based iterations, once later patches eliminate the need for sector-aligned operations. For ease of review, bdrv_is_allocated() was tackled separately. Signed-off-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-10block: Minimize raw use of bds->total_sectorsEric Blake1-8/+6
bdrv_is_allocated_above() was relying on intermediate->total_sectors, which is a field that can have stale contents depending on the value of intermediate->has_variable_length. An audit shows that we are safe (we were first calling through bdrv_co_get_block_status() which in turn calls bdrv_nb_sectors() and therefore just refreshed the current length), but it's nicer to favor our accessor functions to avoid having to repeat such an audit, even if it means refresh_total_sectors() is called more frequently. Suggested-by: John Snow <jsnow@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Manos Pitsidianakis <el13635@mail.ntua.gr> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-10block: Make bdrv_is_allocated() byte-basedEric Blake9-105/+126
We are gradually moving away from sector-based interfaces, towards byte-based. In the common case, allocation is unlikely to ever use values that are not naturally sector-aligned, but it is possible that byte-based values will let us be more precise about allocation at the end of an unaligned file that can do byte-based access. Changing the signature of the function to use int64_t *pnum ensures that the compiler enforces that all callers are updated. For now, the io.c layer still assert()s that all callers are sector-aligned on input and that *pnum is sector-aligned on return to the caller, but that can be relaxed when a later patch implements byte-based block status. Therefore, this code adds usages like DIV_ROUND_UP(,BDRV_SECTOR_SIZE) to callers that still want aligned values, where the call might reasonbly give non-aligned results in the future; on the other hand, no rounding is needed for callers that should just continue to work with byte alignment. For the most part this patch is just the addition of scaling at the callers followed by inverse scaling at bdrv_is_allocated(). But some code, particularly bdrv_commit(), gets a lot simpler because it no longer has to mess with sectors; also, it is now possible to pass NULL if the caller does not care how much of the image is allocated beyond the initial offset. Leave comments where we can further simplify once a later patch eliminates the need for sector-aligned requests through bdrv_is_allocated(). For ease of review, bdrv_is_allocated_above() will be tackled separately. Signed-off-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-10backup: Switch backup_run() to byte-basedEric Blake1-17/+15
We are gradually converting to byte-based interfaces, as they are easier to reason about than sector-based. Change the internal loop iteration of backups to track by bytes instead of sectors (although we are still guaranteed that we iterate by steps that are cluster-aligned). Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-10backup: Switch backup_do_cow() to byte-basedEric Blake1-36/+26
We are gradually converting to byte-based interfaces, as they are easier to reason about than sector-based. Convert another internal function (no semantic change). Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-10backup: Switch block_backup.h to byte-basedEric Blake3-26/+28
We are gradually converting to byte-based interfaces, as they are easier to reason about than sector-based. Continue by converting the public interface to backup jobs (no semantic change), including a change to CowRequest to track by bytes instead of cluster indices. Note that this does not change the difference between the public interface (starting point, and size of the subsequent range) and the internal interface (starting and end points). Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Xie Changlong <xiechanglong@cmss.chinamobile.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-10backup: Switch BackupBlockJob to byte-basedEric Blake1-18/+15
We are gradually converting to byte-based interfaces, as they are easier to reason about than sector-based. Continue by converting an internal structure (no semantic change), and all references to tracking progress. Drop a redundant local variable bytes_per_cluster. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-10block: Drop unused bdrv_round_sectors_to_clusters()Eric Blake2-25/+0
Now that the last user [mirror_iteration()] has converted to using bytes, we no longer need a function to round sectors to clusters. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.2.1 (git 2.18.0) at 2024-07-01 19:59:03 +0000