| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
staging
QAPI patches for 2018-05-04
# gpg: Signature made Fri 04 May 2018 08:59:16 BST
# gpg: using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2018-05-04:
qapi: deprecate CpuInfoFast.arch
qapi: discriminate CpuInfoFast on SysEmuTarget, not CpuInfoArch
qapi: change the type of TargetInfo.arch from string to enum SysEmuTarget
qapi: add SysEmuTarget to "common.json"
qapi: fill in CpuInfoFast.arch in query-cpus-fast
qobject: Modify qobject_ref() to return obj
qobject: Replace qobject_incref/QINCREF qobject_decref/QDECREF
qobject: use a QObjectBase_ struct
qobject: Ensure base is at offset 0
qobject: Use qobject_to() instead of type cast
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
First s390x pull request for 2.13.
- new machine type
- extend SCLP event masks
- support configuration of consoles via -serial
- firmware improvements: non-sequential entries in boot menu, support
for indirect loading via .INS files in s390-netboot
- bugfixes and cleanups
# gpg: Signature made Fri 04 May 2018 08:19:57 BST
# gpg: using RSA key DECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>"
# gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# gpg: aka "Cornelia Huck <cohuck@kernel.org>"
# gpg: aka "Cornelia Huck <cohuck@redhat.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* remotes/cohuck/tags/s390x-20180504:
pc-bios/s390: Update firmware images
s390-ccw: force diag 308 subcode to unsigned long
pc-bios/s390-ccw/net: Add support for .INS config files
pc-bios/s390-ccw/net: Use diag308 to reset machine before jumping to the OS
pc-bios/s390-ccw/net: Split up net_load() into init, load and release parts
pc-bios/s390-ccw: fix non-sequential boot entries (enum)
pc-bios/s390-ccw: fix non-sequential boot entries (eckd)
pc-bios/s390-ccw: fix loadparm initialization and int conversion
pc-bios/s390-ccw: rename MAX_TABLE_ENTRIES to MAX_BOOT_ENTRIES
pc-bios/s390-ccw: size_t should be unsigned
hw/s390x: Allow to configure the consoles with the "-serial" parameter
s390x/kvm: cleanup calls to cpu_synchronize_state()
vfio-ccw: introduce vfio_ccw_get_device()
s390x/sclp: extend SCLP event masks to 64 bits
s390x: introduce 2.13 compat machine
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
into staging
ppc patch queue 2018-05-04
Second patch of patches for qemu-2.13 (or whatever the version ends up
being called). Highlights are:
* Preliminary patches for POWER9 hash MMU support for powernv
* A number of cleanups fo pseries startup and LPCR handling
* Remove support for explicitly allocated RMAs (which require kernel
support that's been gone for 3+ years)
* Some mac_newworld cleanups
* A few bugfixes
# gpg: Signature made Fri 04 May 2018 06:07:43 BST
# gpg: using RSA key 6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.13-20180504:
spapr: don't advertise radix GTSE if max-compat-cpu < power9
spapr: don't migrate "spapr_option_vector_ov5_cas" to pre 2.8 machines
target/ppc: always set PPC_MEM_TLBIE in pre 2.8 migration hack
mac_newworld: move wiring of macio IRQs to macio_newworld_realize()
mac_newworld: remove pics IRQ array and wire up macio to OpenPIC directly
uninorth: create new uninorth device
spapr: Clean up handling of LPCR power-saving exit bits
spapr: Move PAPR mode cpu setup fully to spapr code
target/ppc: Delay initialization of LPCR_UPRT for secondary cpus
spapr: Clean up LPCR updates from hypercalls
spapr: Make a helper to set up cpu entry point state
spapr: Remove unhelpful helpers from rtas_start_cpu()
spapr: Clean up rtas_start_cpu() & rtas_stop_self()
target/ppc: Add ppc_store_lpcr() helper
spapr: Remove support for explicitly allocated RMAs
target/ppc: add basic support for PTCR on POWER9
target/ppc: return a nil HPT base address on sPAPR machines
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
'remotes/vivier2/tags/linux-user-for-2.13-pull-request' into staging
# gpg: Signature made Thu 03 May 2018 22:38:35 BST
# gpg: using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg: aka "Laurent Vivier <laurent@vivier.eu>"
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/linux-user-for-2.13-pull-request:
linux-user: remove useless padding in flock64 structure
linux-user: introduce target_sigsp() and target_save_altstack()
linux-user: ARM-FDPIC: Add support for signals for FDPIC targets
linux-user: ARM-FDPIC: Add support of FDPIC for ARM.
linux-user: ARM-FDPIC: Identify ARM FDPIC binaries
Remove CONFIG_USE_FDPIC.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The TARGET_BASE_ARCH values from "configure" don't all map to the
@CpuInfoArch enum constants; in particular "s390x" from the former does
not match @s390 in the latter. Clients are known to rely on the @s390
constant specifically, so we can't change it silently. Instead, deprecate
the @CpuInfoFast.@arch member (in favor of @CpuInfoFast.@target) using the
regular deprecation process.
(No deprecation reminder is added to sysemu_target_to_cpuinfo_arch(): once
@CpuInfoFast.@arch is removed, the assignment expression that calls
sysemu_target_to_cpuinfo_arch() from qmp_query_cpus_fast() will have to
disappear; in turn the static function left without callers will also
break the build, thus it'll have to go.)
Cc: "Daniel P. Berrange" <berrange@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20180427192852.15013-6-lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Add a new field @target (of type @SysEmuTarget) to the output of the
@query-cpus-fast command, which provides more information about the
emulation target than the field @arch (of type @CpuInfoArch). Make @target
the new discriminator for the @CpuInfoFast return structure. Keep @arch
for compatibility.
Cc: "Daniel P. Berrange" <berrange@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180427192852.15013-5-lersek@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Now that we have @SysEmuTarget, it makes sense to restrict
@TargetInfo.@arch to valid sysemu targets at the schema level.
Cc: "Daniel P. Berrange" <berrange@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180427192852.15013-4-lersek@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
We'll soon need an enumeration type that lists all the softmmu targets
that QEMU (the project) supports. Introduce @SysEmuTarget to
"common.json".
The enum constant @x86_64 doesn't match the QAPI convention of preferring
hyphen ("-") over underscore ("_"). This is intentional; the @SysEmuTarget
constants are supposed to produce QEMU executable names when stringified
and appended to the "qemu-system-" prefix. Put differently, the
replacement text of the TARGET_NAME preprocessor macro must be possible to
look up in the list of (stringified) enum constants.
Like other enum types, @SysEmuTarget too can be used for discriminator
fields in unions. For the @i386 constant, a C-language union member called
"i386" would be generated. On mingw build hosts, "i386" is a macro
however. Add "i386" to "polluted_words" at once.
Cc: "Daniel P. Berrange" <berrange@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20180427192852.15013-3-lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
* Commit ca230ff33f89 added the @arch field to @CpuInfoFast, but it failed
to set the new field in qmp_query_cpus_fast(), when TARGET_S390X was not
defined. The updated @query-cpus-fast example in "qapi-schema.json"
showed "arch":"x86" only because qmp_query_cpus_fast() calls g_malloc0()
to allocate @CpuInfoFast, and the CPU_INFO_ARCH_X86 enum constant is
generated with value 0.
All @arch values other than @s390 implied the @CpuInfoOther sub-struct
for @CpuInfoFast -- at the time of writing the patch --, thus no fields
other than @arch needed to be set when TARGET_S390X was not defined. Set
@arch now, by copying the corresponding assignments from
qmp_query_cpus().
* Commit 25fa194b7b11 added the @riscv enum constant to @CpuInfoArch (used
in both @CpuInfo and @CpuInfoFast -- the return types of the @query-cpus
and @query-cpus-fast commands, respectively), and assigned, in both
return structures, the @CpuInfoRISCV sub-structure to the new enum
value.
However, qmp_query_cpus_fast() would not populate either the @arch field
or the @CpuInfoRISCV sub-structure, when TARGET_RISCV was defined; only
qmp_query_cpus() would.
Assign @CpuInfoOther to the @riscv enum constant in @CpuInfoFast, and
populate only the @arch field in qmp_query_cpus_fast(). Getting CPU
state without interrupting KVM is an exceptional thing that only S390X
does currently. Quoting Cornelia Huck <cohuck@redhat.com>, "s390x is
exceptional in that it has state in QEMU that is actually interesting
for upper layers and can be retrieved without performance penalty". See
also
<https://www.redhat.com/archives/libvir-list/2018-February/msg00121.html>.
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Viktor VM Mihajlovski <mihajlov@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org
Fixes: ca230ff33f89bf7102cbfbc2328716da6750aaed
Fixes: 25fa194b7b11901561532e435beb83d046899f7a
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180427192852.15013-2-lersek@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
For convenience and clarity, make it possible to call qobject_ref() at
the time when the reference is associated with a variable, or
argument, by making qobject_ref() return the same pointer as given.
Use that to simplify the callers.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180419150145.24795-5-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Useless change to qobject_ref_impl() dropped, commit message improved
slightly]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Now that we can safely call QOBJECT() on QObject * as well as its
subtypes, we can have macros qobject_ref() / qobject_unref() that work
everywhere instead of having to use QINCREF() / QDECREF() for QObject
and qobject_incref() / qobject_decref() for its subtypes.
The replacement is mechanical, except I broke a long line, and added a
cast in monitor_qmp_cleanup_req_queue_locked(). Unlike
qobject_decref(), qobject_unref() doesn't accept void *.
Note that the new macros evaluate their argument exactly once, thus no
need to shout them.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180419150145.24795-4-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Rebased, semantic conflict resolved, commit message improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
By moving the base fields to a QObjectBase_, QObject can be a type
which also has a 'base' field. This allows writing a generic QOBJECT()
macro that will work with any QObject type, including QObject
itself. The container_of() macro ensures that the object to cast has a
QObjectBase_ base field, giving some type safety guarantees. QObject
must have no members but QObjectBase_ base, or else QOBJECT() breaks.
QObjectBase_ is not a typedef and uses a trailing underscore to make
it obvious it is not for normal use and to avoid potential abuse.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180419150145.24795-3-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
All QObject types have the base QObject as their first field. This
allows the simplification of qobject_to().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180419150145.24795-2-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message paragraph on type casts dropped, to avoid giving the
impression type casting would be okay]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
The proper way to convert from (abstract) QObject to a (concrete)
subtype is qobject_to(). Look for offenders that type cast instead:
$ git-grep '(Q[A-Z][a-z]* \*)'
hmp.c: qmp_device_add((QDict *)qdict, NULL, &err);
include/qapi/qmp/qobject.h: return (QObject *)obj;
qobject/qobject.c:static void (*qdestroy[QTYPE__MAX])(QObject *) = {
tests/check-qdict.c: dst = (QDict *)qdict_crumple(src, &error_abort);
The first two cast away const, the third isn't a type cast. Fix the
fourth.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180426152805.8469-1-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
|
|
On a POWER9 host, if a guest runs in pre POWER9 compat mode, it necessarily
uses the hash MMU mode. In this case, we shouldn't advertise radix GTSE in
the ibm,arch-vec-5-platform-support DT property as the current code does.
The first reason is that it doesn't make sense, and the second one is that
causes the CAS-negotiated options subsection to be migrated. This breaks
backward migration to QEMU 2.7 and older versions on POWER8 hosts:
qemu-system-ppc64: error while loading state for instance 0x0 of device
'spapr'
qemu-system-ppc64: load of migration failed: No such file or directory
This patch hence initialize CPUs a bit earlier so that we can check the
requested compat mode, and don't set OV5_MMU_RADIX_GTSE for power8 and
older.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
a324d6f16697 "spapr: Support ibm,dynamic-memory-v2 property" added
a new feature in the set of CAS-negotiatable options. This causes
the CAS-negotiated options subsection to be migrated, even for old
machine types that don't know about it, and breaks backward migration
to QEMU 2.7 and older versions:
qemu-system-ppc64: error while loading state for instance 0x0 of device
'spapr'
qemu-system-ppc64: load of migration failed: No such file or directory
Since this feature only affects boot time behaviour, it should be
filtered out when we decide to migrate CAS-negotiated options, like
we already do with OV5_FORM1_AFFINITY and OV5_DRCONF_MEMORY.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
The pseries-2.7 and older machine types require CPUPPCState::insns_flags
to be strictly equal between source and destination. This checking is
abusive and breaks migration of KVM guests when the host CPU models
are different, even if they are compatible enough to allow the guest
to run transparently. This buggy behaviour was fixed for pseries-2.8
and we added some hacks to allow backward migration of older machine
types. These hacks assume that the CPU belongs to the POWER8 family,
which was true for most KVM based setup we cared about at the time.
But now POWER9 systems are coming, and backward migration of pre 2.8
guests running in POWER8 architected mode from a POWER9 host to a
POWER8 host is broken:
qemu-system-ppc64: error while loading state for instance 0x0 of device
'cpu'
qemu-system-ppc64: load of migration failed: Invalid argument
This happens because POWER9 doesn't set PPC_MEM_TLBIE in insns_flags,
while POWER8 does. Let's force PPC_MEM_TLBIE in the migration hack to
fix the issue. This is an acceptable hack because these old machine
types only support CPU models that do set PPC_MEM_TLBIE.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Since the macio device has a link to the PIC device, we can now wire up the
IRQs directly via qdev GPIOs rather than having to use an intermediate array.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Introduce constants for the pre-defined New World IRQs to help keep things
readable.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Commit 4e46dcdbd3 "PPC: Newworld: Add uninorth token register" added a TODO
which was to convert the uninorth registers hack to a proper device. Move
these registers to a new uninorth device, removing the old hacks from
mac_newworld.c.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
To prevent spurious wakeups on cpus that are supposed to be disabled, we
need to clear the LPCR bits which control certain wakeup events.
spapr_cpu_reset() has separate cases here for boot and non-boot (initially
inactive) cpus. rtas_start_cpu() then turns the LPCR bits on when the
non-boot cpus are activated.
But explicit checks against first_cpu are not how we usually do things:
instead spapr_cpu_reset() generally sets things up for non-boot (inactive)
cpus, then spapr_machine_reset() and/or rtas_start_cpu() override as
necessary.
So, do that instead. Because the LPCR activation is identical for boot
cpus and non-boot cpus just activated with rtas_start_cpu() we can put the
code common in spapr_cpu_set_entry_state().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
|
|
cpu_ppc_set_papr() does several things:
1) it sets up the virtual hypervisor interface
2) it prevents the cpu from ever entering hypervisor mode
3) it tells KVM that we're emulating a cpu in PAPR mode
and 4) it configures the LPCR and AMOR (hypervisor privileged registers)
so that TCG will behave correctly for PAPR guests, without
attempting to emulate the cpu in hypervisor mode
(1) & (2) make sense for any virtual hypervisor (if another one ever
exists).
(3) belongs more properly in the machine type specific to a PAPR guest, so
move it to spapr_cpu_init(). While we're at it, remove an ugly test on
kvm_enabled() by making kvmppc_set_papr() a safe no-op on non-KVM.
(4) also belongs more properly in the machine type specific code. (4) is
done by mangling the default values of the SPRs, so that they will be set
correctly at reset time. Manipulating usually-static parameters of the cpu
model like this is kind of ugly, especially since the values used really
have more to do with the platform than the cpu.
The spapr code already has places for PAPR specific initializations of
register state in spapr_cpu_reset(), so move this handling there.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
|
|
In cpu_ppc_set_papr() the UPRT and GTSE bits of the LPCR default value are
initialized based on on ppc64_radix_guest(). Which seems reasonable,
except that ppc64_radix_guest() is based on spapr->patb_entry which is
only set up in spapr_machine_reset, called _after_ cpu_ppc_set_papr() for
boot cpus. Well, and the fact that modifying the SPR default value for an
instance rather than a class is kind of yucky.
The initialization here is really only necessary or valid for
hotplugged cpus; the base cpu initialization already sets a value
that's good enough for the boot cpus until the guest uses an hcall to
configure it's preferred MMU mode.
So, move this initialization to the rtas_start_cpu() path, at which point
ppc64_radix_guest() will have a sensible value, to make sure secondary cpus
come up in an MMU mode matching the existing cpus.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
|
|
There are several places in spapr_hcall.c where we need to update the LPCR
value on all CPUs. We do this with the set_spr() helper. That's not
really correct because this directly sets the SPR value, without going
through the ppc_store_lpcr() helper which may need to update state based
on the LPCR change.
In fact, set_spr() is only ever used for the LPCR, so replace it with an
explicit LPCR updated which uses the right low-level helper. While we're
there, move the CPU_FOREACH() which was in every one of the callers into
the new helper: set_all_lpcrs().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
|
|
Under PAPR, only the boot CPU is active when the system starts. Other cpus
must be explicitly activated using an RTAS call. The entry state for the
boot and secondary cpus isn't identical, but it has some things in common.
We're going to add a bit more common setup later, too, so to simplify
make a helper which sets up the common entry state for both boot and
secondary cpu threads.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
|
|
rtas_start_cpu() calls spapr_cpu_update_tb_offset() and
spapr_cpu_set_endianness() to initialize certain things in the new cpu's
state. This is the only caller of those helpers, and they're each only
a few lines long, so we might as well just fold them into the caller.
In addition, those helpers initialize state on the new cpu to match that of
the first cpu. That will generally work, but might be at least logically
incorrect if the first cpu has been set offline by the guest. So, instead
base the state on that of the cpu invoking the RTAS call, which is
obviously active already.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
|
|
This makes several minor cleanups to these functions:
* Follow usual convention of an early exit on error, rather than having
most of the body in an if
* Clearer naming of cpu and cpu_. Now callcpu is the cpu from which the
RTAS call is invoked, newcpu is the cpu which we're starting
* Use cpu_synchronize_state() instead of kvm_cpu_synchronize_state()
directly
* Remove pointless comment describing what cpu_synchronize_state() does
* Use ppc_store_lpcr() instead of directly writing the register field
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
|
|
There are some fields in the cpu state which need to be updated when the
LPCR register is changed, which is done by ppc_hash64_update_rmls() and
ppc_hash64_update_vrma(). Code which alters env->spr[SPR_LPCR] needs to
call them afterwards to make sure the state is up to date.
That's easy to get wrong. The normal way of dealing with sitautions like
that is to use a helper which both updates the basic register value and the
derived state.
So, do that.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
|
|
Current POWER cpus allow for a VRMA, a special mapping which describes a
guest's view of memory when in real mode (MMU off, from the guest's point
of view). Older cpus didn't have that which meant that to support a guest
a special host-contiguous region of memory was needed to give the guest its
Real Mode Area (RMA).
KVM used to provide special calls to allocate a contiguous RMA for those
cases. This was useful in the early days of KVM on Power to allow it to be
tested on PowerPC 970 chips as used in Macintosh G5 machines. Now, those
machines are so old as to be almost irrelevant.
The normal qemu deprecation process would require this to be marked
deprecated then removed in 2 releases. However, this can only be used
with corresponding support in the host kernel - which was dropped
years ago (in c17b98cf "KVM: PPC: Book3S HV: Remove code for PPC970
processors" of 2014-12-03 to be precise). Therefore it should be ok
to drop this immediately.
Just to be clear this only affects *KVM HV* guests with PowerPC 970,
and those already require an ancient host kernel. TCG and KVM PR
guests with PowerPC 970 should still work.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Thomas Huth <thuth@redhat.com>
|
|
The Partition Table Control Register (PTCR) is a hypervisor privileged
SPR. It contains the host real address of the Partition Table and its
size.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
commit e57ca75ce3b2 ("target/ppc: Manage external HPT via virtual
hypervisor") exported a set of methods to manipulate the HPT from the
core hash MMU. But SPR_SDR1 is still used under some circumstances to
get the base address of the HPT, which is incorrect for the sPAPR
machines.
Only the logging should be impacted.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
staging
* fix PVRDMA coverity errors
* update MAINTAINERS file
# gpg: Signature made Thu 03 May 2018 18:53:00 BST
# gpg: using RSA key 36D4C0F0CF2FE46D
# gpg: Good signature from "Marcel Apfelbaum <marcel@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: B1C6 3A57 F92E 08F2 640F 31F5 36D4 C0F0 CF2F E46D
* remotes/marcel/tags/rdma-pull-request:
MAINTAINERS: update Marcel Apfelbaum email
hw/rdma: Fix possible out of bounds access to port GID index
hw/rdma: Delete duplicate definition of MAX_RM_TBL_NAME
hw/rdma: Fix possible out of bounds access to regs array
hw/rdma: Fix possible out of bounds access to GID table
hw/rdma: Delete port's pkey table
hw/rdma: Fix possible usage of a NULL pointer
hw/rdma: Fix possible munmap call on a NULL pointer
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Use my gmail account for maintainer tasks.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Message-Id: <20180426084523.10565-1-marcel@redhat.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
|
|
Make sure the backend GID index is less then port's
gid table length.
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Message-Id: <20180430200223.4119-8-marcel.apfelbaum@gmail.com>
|
|
By a mistake this constant was defined twice - remove the duplication.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Message-Id: <20180430200223.4119-7-marcel.apfelbaum@gmail.com>
|
|
Coverity (CID1390589, CID1390608).
Array size is RDMA_BAR1_REGS_SIZE, let's make sure the given address is
in range.
While there also:
1. Adjust the size of this bar to reasonable size
2. Report the size of the array with sizeof(array)
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Message-Id: <20180430200223.4119-6-marcel.apfelbaum@gmail.com>
|
|
Array size is MAX_PORT_GIDS, let's make sure the given index is in
range.
While there limit device table size to 1.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Message-Id: <20180430200223.4119-5-marcel.apfelbaum@gmail.com>
|
|
Support for PKEY is not yet implemented. Removing the unneeded table
until a support will be added.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Message-Id: <20180430200223.4119-4-marcel.apfelbaum@gmail.com>
|
|
Coverity CID 1390586; The cq handle is provided by the guest
and cannot be trusted to be previuosly allocated.
Fix it by exiting the completion flow.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Message-Id: <20180430200223.4119-3-marcel.apfelbaum@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
Coverity CID 1390620: we call munmap() on a NULL pointer.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Message-Id: <20180430200223.4119-2-marcel.apfelbaum@gmail.com>
|
|
Since commit 8efb2ed5ec ("linux-user: Correct signedness of
target_flock l_start and l_len fields"), flock64 structure uses
abi_llong for l_start and l_len in place of "unsigned long long"
this should force them to be aligned accordingly to the target
rules. So we can remove the padding field and the QEMU_PACKED
attribute.
I have compared the result of the following program before and
after the change:
cat -> flock64_dump <<EOF
p/d sizeof(struct target_flock64)
p/d &((struct target_flock64 *)0)->l_type
p/d &((struct target_flock64 *)0)->l_whence
p/d &((struct target_flock64 *)0)->l_start
p/d &((struct target_flock64 *)0)->l_len
p/d &((struct target_flock64 *)0)->l_pid
quit
EOF
for file in build/all/*-linux-user/qemu-* ; do
echo $file
gdb -batch -nx -x flock64_dump $file 2> /dev/null
done
The sizeof() changes because we remove the QEMU_PACKED.
The new size is 32 (except for i386 and m68k) and this is
the real size of "struct flock64" on the target architecture.
The following architectures differ:
aarch64_be, aarch64, alpha, armeb, arm, cris, hppa, nios2, or1k,
riscv32, riscv64, s390x.
For a subset of these architectures, I have checked with the following
program the new structure is the correct one:
#include <stdio.h>
#define __USE_LARGEFILE64
#include <fcntl.h>
int main(void)
{
printf("struct flock64 %d\n", sizeof(struct flock64));
printf("l_type %d\n", &((struct flock64 *)0)->l_type);
printf("l_whence %d\n", &((struct flock64 *)0)->l_whence);
printf("l_start %d\n", &((struct flock64 *)0)->l_start);
printf("l_len %d\n", &((struct flock64 *)0)->l_len);
printf("l_pid %d\n", &((struct flock64 *)0)->l_pid);
}
[I have checked aarch64, alpha, hppa, s390x]
For ARM, the target_flock64 becomes the EABI definition, so we need to
define the OABI one in place of the EABI one and use it when it is
needed.
I have also fixed the alignment value for sh4 (to align llong on 4 bytes)
(see c2e3dee6e0 "linux-user: Define target alignment size")
[We should check alignment properties for cris, nios2 and or1k]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180502215730.28162-1-laurent@vivier.eu>
|
|
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180411192347.30228-1-laurent@vivier.eu>
|
|
The FDPIC restorer needs to deal with a function descriptor, hence we
have to extend 'retcode' such that it can hold the instructions needed
to perform this.
The restorer sequence uses the same thumbness as the exception
handler (mainly to support Thumb-only architectures).
Co-Authored-By: Mickaël Guêné <mickael.guene@st.com>
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180430080404.7323-5-christophe.lyon@st.com>
[lv: moved the change to linux-user/arm/signal.c]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
|
|
Add FDPIC info into image_info structure since interpreter info is on
stack and needs to be saved to be accessed later on.
Co-Authored-By: Mickaël Guêné <mickael.guene@st.com>
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180430080404.7323-4-christophe.lyon@st.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
|
|
Define an ARM-specific version of elf_is_fdpic:
FDPIC ELF objects are identified with e_ident[EI_OSABI] ==
ELFOSABI_ARM_FDPIC.
Co-Authored-By: Mickaël Guêné <mickael.guene@st.com>
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180430080404.7323-3-christophe.lyon@st.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
|
|
We want to avoid code disabled by default, because it ends up less
tested. This patch removes all instances of #ifdef CONFIG_USE_FDPIC,
most of which can be safely kept. For the ones that should be
conditionally executed, we define elf_is_fdpic(). Without this patch,
defining CONFIG_USE_FDPIC would prevent QEMU from building precisely
because elf_is_fdpic is not defined.
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180430080404.7323-2-christophe.lyon@st.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
|
|
s390-ccw firmware updates:
- Improvements to the boot menu (can now handle non-sequential entries)
- s390-netboot now resets the machine before jumping into the OS kernel
- s390-netboot now supports indirect loading via .INS files
- some other minor fixes and clean-ups
# gpg: Signature made Wed 02 May 2018 04:15:21 PM CEST
# gpg: using RSA key 2ED9D774FE702DB5
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [undefined]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [undefined]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
* tag 'tags/s390x-2018-05-02':
pc-bios/s390: Update firmware images
s390-ccw: force diag 308 subcode to unsigned long
pc-bios/s390-ccw/net: Add support for .INS config files
pc-bios/s390-ccw/net: Use diag308 to reset machine before jumping to the OS
pc-bios/s390-ccw/net: Split up net_load() into init, load and release parts
pc-bios/s390-ccw: fix non-sequential boot entries (enum)
pc-bios/s390-ccw: fix non-sequential boot entries (eckd)
pc-bios/s390-ccw: fix loadparm initialization and int conversion
pc-bios/s390-ccw: rename MAX_TABLE_ENTRIES to MAX_BOOT_ENTRIES
pc-bios/s390-ccw: size_t should be unsigned
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
Queued TCG patches
# gpg: Signature made Wed 02 May 2018 18:43:33 BST
# gpg: using RSA key 64DF38E8AF7E215F
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>"
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth/tags/pull-tcg-20180502:
tcg: workaround branch instruction overflow in tcg_out_qemu_ld/st
tcg: Improve TCGv_ptr support
tcg: Allow wider vectors for cmp and mul
tcg/arm: Fix memory barrier encoding
tcg: Document INDEX_mul[us]h_*
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Just one trace
# gpg: Signature made Wed 02 May 2018 07:59:38 BST
# gpg: using RSA key 71D4D5E5822F73D6
# gpg: Good signature from "Greg Kurz <groug@kaod.org>"
# gpg: aka "Gregory Kurz <gregory.kurz@free.fr>"
# gpg: aka "[jpeg image of size 3330]"
# Primary key fingerprint: B482 8BAF 9431 40CE F2A3 4910 71D4 D5E5 822F 73D6
* remotes/gkurz/tags/for-upstream:
9p: add trace event for v9fs_setattr()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
s390-ccw.img contains fixes for the boot menu, and s390-netboot.img
contains the support for .INS files and the patch for resetting the
machine with diag308.
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
