summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-03-05ui/sdl: build as moduleGerd Hoffmann2-2/+3
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20180301100547.18962-14-kraxel@redhat.com
2018-03-05audio: rename CONFIG_* to CONFIG_AUDIO_*Gerd Hoffmann3-8/+8
This avoids a name clash for CONFIG_SDL, which is used by both sdl video support and sdl audio support. It also more clear that this is a audio driver configuration. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20180301100547.18962-13-kraxel@redhat.com
2018-03-05ui/curses: build as moduleGerd Hoffmann3-4/+12
Also drop curses libs from libs_softmmu. Add CURSES_{CFLAGS,LIBS} variables so we can use them for linking the curses module. Also make target/unicore32/helper.o depend on curses which uses curses directly for some reason ... Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20180301100547.18962-12-kraxel@redhat.com
2018-03-05ui/gtk: build as moduleGerd Hoffmann2-11/+11
Also drop gtk and vte libs from libs_softmmu, so the libs are not pulled in unless the gtk module actually gets loaded. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20180301100547.18962-11-kraxel@redhat.com
2018-03-05configure: opengl doesn't depend on x11Gerd Hoffmann1-3/+3
So remove x11 from pkg-config check and don't add x11 cflags/libs to opengl cflags/libs. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20180301100547.18962-10-kraxel@redhat.com
2018-03-05configure: add X11 vars to config-host.makGerd Hoffmann2-3/+12
Simplifies handling the X11 dependency, also makes ui/Makefile.objs more readable. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20180301100547.18962-9-kraxel@redhat.com
2018-03-05console: add ui module loading supportGerd Hoffmann3-0/+8
If a requested user interface is not available, try loading it as module, simliar to block layer modules. Needed to keep things working when followup patches start to build user interfaces as modules. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20180301100547.18962-8-kraxel@redhat.com
2018-03-05console: add and use qemu_display_find_defaultGerd Hoffmann3-10/+25
Using the new display registry instead of #ifdefs in vl.c. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20180301100547.18962-7-kraxel@redhat.com
2018-03-05egl-headless: switch over to new display registryGerd Hoffmann3-16/+19
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20180301100547.18962-6-kraxel@redhat.com
2018-03-05curses: switch over to new display registryGerd Hoffmann3-28/+15
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20180301100547.18962-5-kraxel@redhat.com
2018-03-05cocoa: switch over to new display registryGerd Hoffmann3-16/+13
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20180301100547.18962-4-kraxel@redhat.com
2018-03-05sdl: switch over to new display registryGerd Hoffmann4-46/+29
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20180301100547.18962-3-kraxel@redhat.com
2018-03-05console: add qemu display registry, add gtkGerd Hoffmann4-34/+67
Add a registry for user interfaces. Add qemu_display_init and qemu_display_early_init helper functions for display initialization. Hook up gtk ui as first user. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20180301100547.18962-2-kraxel@redhat.com
2018-03-02Merge remote-tracking branch ↵Peter Maydell5-18/+53
'remotes/bkoppelmann/tags/pull-tricore-2018-03-02' into staging tricore patches # gpg: Signature made Fri 02 Mar 2018 10:59:26 GMT # gpg: using RSA key 0AD2C6396B69CA14 # gpg: Good signature from "Bastian Koppelmann <kbastian@mail.uni-paderborn.de>" # Primary key fingerprint: 6E63 6A7E 83F2 DD0C FA6E 6E37 0AD2 C639 6B69 CA14 * remotes/bkoppelmann/tags/pull-tricore-2018-03-02: tricore: renamed masking of PIE tricore: renamed masking of IE tricore: added CORE_ID tricore: added some missing cpu instructions Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-02Merge remote-tracking branch ↵Peter Maydell45-191/+4659
'remotes/pmaydell/tags/pull-target-arm-20180302' into staging target-arm queue: * implement FCMA and RDM v8.1 and v8.3 instructions * enable Cortex-M33 v8M core, and provide new mps2-an505 board model that uses it * decodetree: Propagate return value from translate subroutines * xlnx-zynqmp: Implement the RTC device # gpg: Signature made Fri 02 Mar 2018 11:05:40 GMT # gpg: using RSA key 3C2525ED14360CDE # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" # gpg: aka "Peter Maydell <pmaydell@gmail.com>" # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20180302: (39 commits) target/arm: Enable ARM_FEATURE_V8_FCMA target/arm: Decode t32 simd 3reg and 2reg_scalar extension target/arm: Decode aa32 armv8.3 2-reg-index target/arm: Decode aa32 armv8.3 3-same target/arm: Decode aa64 armv8.3 fcmla target/arm: Decode aa64 armv8.3 fcadd target/arm: Add ARM_FEATURE_V8_FCMA target/arm: Enable ARM_FEATURE_V8_RDM target/arm: Decode aa32 armv8.1 two reg and a scalar target/arm: Decode aa32 armv8.1 three same target/arm: Decode aa64 armv8.1 scalar/vector x indexed element target/arm: Decode aa64 armv8.1 three same extra target/arm: Decode aa64 armv8.1 scalar three same extra target/arm: Refactor disas_simd_indexed size checks target/arm: Refactor disas_simd_indexed decode target/arm: Add ARM_FEATURE_V8_RDM mps2-an505: New board model: MPS2 with AN505 Cortex-M33 FPGA image hw/arm/iotkit: Model Arm IOT Kit hw/misc/iotkit-secctl: Add remaining simple registers hw/misc/iotkit-secctl: Add handling for PPCs ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-02Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2018-03-01' into ↵Peter Maydell7-32/+72
staging nbd patches for 2018-03-01 - Eric Blake: nbd: Honor server's advertised minimum block size - Vladimir Sementsov-Ogievskiy: partial: nbd block status base:allocation # gpg: Signature made Thu 01 Mar 2018 21:01:22 GMT # gpg: using RSA key A7A16B4A2527436A # gpg: Good signature from "Eric Blake <eblake@redhat.com>" # gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" # gpg: aka "[jpeg image of size 6874]" # Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A * remotes/ericb/tags/pull-nbd-2018-03-01: nbd/client: fix error messages in nbd_handle_reply_err nbd: BLOCK_STATUS constants nbd: change indenting in nbd.h nbd: Honor server's advertised minimum block size Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-02target/arm: Enable ARM_FEATURE_V8_FCMARichard Henderson2-0/+2
Enable it for the "any" CPU used by *-linux-user. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180228193125.20577-17-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-02target/arm: Decode t32 simd 3reg and 2reg_scalar extensionRichard Henderson1-1/+13
Happily, the bits are in the same places compared to a32. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-16-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-02target/arm: Decode aa32 armv8.3 2-reg-indexRichard Henderson1-0/+61
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-15-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-02target/arm: Decode aa32 armv8.3 3-sameRichard Henderson1-0/+68
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180228193125.20577-14-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-02target/arm: Decode aa64 armv8.3 fcmlaRichard Henderson3-8/+246
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-13-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> [PMM: renamed e1/e2/e3/e4 to use the same naming as the version of the pseudocode in the Arm ARM] Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-02target/arm: Decode aa64 armv8.3 fcaddRichard Henderson3-1/+151
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-12-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-02target/arm: Add ARM_FEATURE_V8_FCMARichard Henderson2-0/+2
Not enabled anywhere yet. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-02target/arm: Enable ARM_FEATURE_V8_RDMRichard Henderson2-0/+2
Enable it for the "any" CPU used by *-linux-user. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180228193125.20577-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-02target/arm: Decode aa32 armv8.1 two reg and a scalarRichard Henderson1-2/+40
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-9-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-02target/arm: Decode aa32 armv8.1 three sameRichard Henderson1-19/+67
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-02target/arm: Decode aa64 armv8.1 scalar/vector x indexed elementRichard Henderson1-0/+29
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-02target/arm: Decode aa64 armv8.1 three same extraRichard Henderson3-0/+166
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-02target/arm: Decode aa64 armv8.1 scalar three same extraRichard Henderson4-1/+198
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-02target/arm: Refactor disas_simd_indexed size checksRichard Henderson1-31/+30
The integer size check was already outside of the opcode switch; move the floating-point size check outside as well. Unify the size vs index adjustment between fp and integer paths. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180228193125.20577-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-02target/arm: Refactor disas_simd_indexed decodeRichard Henderson1-66/+59
Include the U bit in the switches rather than testing separately. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180228193125.20577-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-02target/arm: Add ARM_FEATURE_V8_RDMRichard Henderson2-0/+2
Not enabled anywhere yet. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180228193125.20577-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-02mps2-an505: New board model: MPS2 with AN505 Cortex-M33 FPGA imagePeter Maydell2-0/+504
Define a new board model for the MPS2 with an AN505 FPGA image containing a Cortex-M33. Since the FPGA images for TrustZone cores (AN505, and the similar AN519 for Cortex-M23) have a significantly different layout of devices to the non-TrustZone images, we use a new source file rather than shoehorning them into the existing mps2.c. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-20-peter.maydell@linaro.org
2018-03-02hw/arm/iotkit: Model Arm IOT KitPeter Maydell4-0/+709
Model the Arm IoT Kit documented in http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ecm0601256/index.html The Arm IoT Kit is a subsystem which includes a CPU and some devices, and is intended be extended by adding extra devices to form a complete system. It is used in the MPS2 board's AN505 image for the Cortex-M33. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-19-peter.maydell@linaro.org
2018-03-02hw/misc/iotkit-secctl: Add remaining simple registersPeter Maydell2-6/+30
Add remaining easy registers to iotkit-secctl: * NSCCFG just routes its two bits out to external GPIO lines * BRGINSTAT/BRGINTCLR/BRGINTEN can be dummies, because QEMU's bus fabric can never report errors Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180220180325.29818-18-peter.maydell@linaro.org
2018-03-02hw/misc/iotkit-secctl: Add handling for PPCsPeter Maydell2-19/+315
The IoTKit Security Controller includes various registers that expose to software the controls for the Peripheral Protection Controllers in the system. Implement these. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-17-peter.maydell@linaro.org
2018-03-02hw/misc/iotkit-secctl: Arm IoT Kit security controller initial skeletonPeter Maydell5-0/+496
The Arm IoT Kit includes a "security controller" which is largely a collection of registers for controlling the PPCs and other bits of glue in the system. This commit provides the initial skeleton of the device, implementing just the ID registers, and a couple of read-only read-as-zero registers. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-16-peter.maydell@linaro.org
2018-03-02hw/misc/tz-ppc: Model TrustZone peripheral protection controllerPeter Maydell5-0/+418
Add a model of the TrustZone peripheral protection controller (PPC), which is used to gate transactions to non-TZ-aware peripherals so that secure software can configure them to not be accessible to non-secure software. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-15-peter.maydell@linaro.org
2018-03-02hw/misc/mps2-fpgaio: FPGA control block for MPS2 AN505Peter Maydell5-0/+227
The MPS2 AN505 FPGA image includes a "FPGA control block" which is a small set of registers handling LEDs, buttons and some counters. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-14-peter.maydell@linaro.org
2018-03-02hw/core/split-irq: Device that splits IRQ linesPeter Maydell4-1/+150
In some board or SoC models it is necessary to split a qemu_irq line so that one input can feed multiple outputs. We currently have qemu_irq_split() for this, but that has several deficiencies: * it can only handle splitting a line into two * it unavoidably leaks memory, so it can't be used in a device that can be deleted Implement a qdev device that encapsulates splitting of IRQs, with a configurable number of outputs. (This is in some ways the inverse of the TYPE_OR_IRQ device.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-13-peter.maydell@linaro.org
2018-03-02qdev: Add new qdev_init_gpio_in_named_with_opaque()Peter Maydell2-5/+33
The function qdev_init_gpio_in_named() passes the DeviceState pointer as the opaque data pointor for the irq handler function. Usually this is what you want, but in some cases it would be helpful to use some other data pointer. Add a new function qdev_init_gpio_in_named_with_opaque() which allows the caller to specify the data pointer they want. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-12-peter.maydell@linaro.org
2018-03-02include/hw/or-irq.h: Add missing include guardPeter Maydell1-0/+5
The or-irq.h header file is missing the customary guard against multiple inclusion, which means compilation fails if it gets included twice. Fix the omission. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-11-peter.maydell@linaro.org
2018-03-02hw/misc/unimp: Move struct to header filePeter Maydell2-10/+10
Move the definition of the struct for the unimplemented-device from unimp.c to unimp.h, so that users can embed the struct in their own device structs if they prefer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-10-peter.maydell@linaro.org
2018-03-02target/arm: Add Cortex-M33Peter Maydell1-0/+31
Add a Cortex-M33 definition. The M33 is an M profile CPU which implements the ARM v8M architecture, including the M profile Security Extension. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-9-peter.maydell@linaro.org
2018-03-02armv7m: Forward init-svtor property to CPU objectPeter Maydell2-0/+11
Create an "init-svtor" property on the armv7m container object which we can forward to the CPU object. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-8-peter.maydell@linaro.org
2018-03-02target/arm: Define init-svtor property for the reset secure VTOR valuePeter Maydell2-4/+17
The Cortex-M33 allows the system to specify the reset value of the secure Vector Table Offset Register (VTOR) by asserting config signals. In particular, guest images for the MPS2 AN505 board rely on the MPS2's initial VTOR being correct for that board. Implement a QEMU property so board and SoC code can set the reset value to the correct value. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-7-peter.maydell@linaro.org
2018-03-02armv7m: Forward idau property to CPU objectPeter Maydell2-0/+12
Create an "idau" property on the armv7m container object which we can forward to the CPU object. Annoyingly, we can't use object_property_add_alias() because the CPU object we want to forward to doesn't exist until the armv7m container is realized. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-6-peter.maydell@linaro.org
2018-03-02target/arm: Define an IDAU interfacePeter Maydell4-3/+104
In v8M, the Implementation Defined Attribution Unit (IDAU) is a small piece of hardware typically implemented in the SoC which provides board or SoC specific security attribution information for each address that the CPU performs MPU/SAU checks on. For QEMU, we model this with a QOM interface which is implemented by the board or SoC object and connected to the CPU using a link property. This commit defines the new interface class, adds the link property to the CPU object, and makes the SAU checking code call the IDAU interface if one is present. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-5-peter.maydell@linaro.org
2018-03-02hw/arm/armv7m: Honour CPU's address space for image loadsPeter Maydell1-3/+14
Instead of loading guest images to the system address space, use the CPU's address space. This is important if we're trying to load the file to memory or via an alias memory region that is provided by an SoC object and thus not mapped into the system address space. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-4-peter.maydell@linaro.org
2018-03-02hw/arm/boot: Honour CPU's address space for image loadsPeter Maydell1-43/+76
Instead of loading kernels, device trees, and the like to the system address space, use the CPU's address space. This is important if we're trying to load the file to memory or via an alias memory region that is provided by an SoC object and thus not mapped into the system address space. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-3-peter.maydell@linaro.org
generated by cgit v1.2.1 (git 2.18.0) at 2024-06-30 18:41:57 +0000