summaryrefslogtreecommitdiff
path: root/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2017-11-09Makefile: Capstone: Add support for cross compile ranlibAlistair Francis1-1/+1
When cross compiling QEMU for Windows we need to specify the cross version of ranlib to avoid build errors when building capstone. This patch ensures we use the same cross prefix on ranlib as other toolchain components. - Fedora23 mingw - RHEL-7.2 with mingw packages from epel: LINK qemu-img.exe build-win64/capstone/capstone.lib: error adding symbols: Archive has no index; run ranlib to add one collect2: error: ld returned 1 exit status $ x86_64-w64-mingw32-ar --version GNU ar (GNU Binutils) 2.25 Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Suggested-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <e457d4e906dceea4de6c3431813a06b137c1ab9c.1510103351.git.alistair.francis@xilinx.com> Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-11-06build: remove use of MAKELEVEL optimization in submodule handlingDaniel P. Berrange1-7/+5
The Makefile attempts to optimize the handling of submodules by using MAKELEVEL to only check the submodule status when running from the top level make invokation. This causes problems for people who are using a makefile of their own to in turn invoke QEMU's makefile, as MAKELEVEL is already set to 1 (or more) when QEMU's makefile runs. This optimization should not really be needed, since the git-submodule.sh script is already used to detect if a submodule update is required. This by removing the MAKELEVEL check, we at most add an extra 'git-submodule.sh status' call to each make level, the overhead of which is lost in noise of building QEMU. Reviewed-by: Greg Kurz <groug@kaod.org> Tested-by: Greg Kurz <groug@kaod.org> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-11-06build: allow automatic git submodule updates to be disabledDaniel P. Berrange1-0/+11
Some people building QEMU use VPATH builds where the source directory is on a read-only volume. In such a case 'scripts/git-submodules.sh update' will always fail and users are required to run it manually themselves on their original writable source directory. While this is already supported, it is nice to give users a command line flag to configure to permanently disable automatic submodule updates, as it means they won't get hard to diagnose failures from git-submodules.sh at an arbitrary later date. This patch thus introduces a flag '--disable-git-update' which will prevent 'make' from ever running 'scripts/git-submodules.sh update'. It will still run the 'status' command to determine if a submodule update is needed, but when it does this it'll simply stop and print a message instructing the developer what todo. eg $ ./configure --target-list=x86_64-softmmu --disable-git-update ...snip... $ make GEN config-host.h GEN trace/generated-tcg-tracers.h GEN trace/generated-helpers-wrappers.h GEN trace/generated-helpers.h GEN trace/generated-helpers.c GEN module_block.h GIT submodule checkout is out of date. Please run scripts/git-submodule.sh update ui/keycodemapdb from the source directory checkout /home/berrange/src/virt/qemu make: *** [Makefile:31: git-submodule-update] Error 1 Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-11-06build: allow setting a custom GIT binary for transparent proxyingDaniel P. Berrange1-2/+2
Some users can't run a bare 'git' command, due to need for a transparent proxying solution such as 'tsocks'. This adds an argument to configure to let users specify such a thing: ./configure --with-git="tsocks git" The submodule script is also updated to give the user a hint about using this flag, if we fail to checkout modules. Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-10-26disas: Add capstone as submoduleRichard Henderson1-0/+15
Do not require the submodule, but use it if present. Allow the command-line to override system or git submodule either way. Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-19build: Fix dtc-checkout race condition in MakefileAaron Lindsay1-1/+1
This was introduced by: commit aef45d51d1204f3335fb99de6658e0c5612c2b67 Author: Daniel P. Berrange <berrange@redhat.com> Date: Fri Sep 29 11:11:56 2017 +0100 build: automatically handle GIT submodule checkout for dtc On my system, I see the following with a fresh clone: % ./configure --disable-gtk --target-list=aarch64-softmmu % make -j8 GEN aarch64-softmmu/config-devices.mak.tmp GEN config-host.h mkdir -p dtc/libfdt GIT ui/keycodemapdb dtc mkdir -p dtc/tests GEN qemu-options.def [snip] GEN migration/trace.h make: *** [git-submodule-update] Error 1 make: *** Waiting for unfinished jobs.... Upon closer inspection, the root cause of the error is: % git submodule update --init ui/keycodemapdb dtc fatal: destination path 'dtc' already exists and is not an empty directory. Clone of 'git://git.qemu-project.org/dtc.git' into submodule path 'dtc' failed This patch fixes this race condition by forcing the 'dtc/%' rule which caused 'dtc' to be non-empty to wait on '.git-submodule-status'. Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1508352023-28591-1-git-send-email-alindsay@codeaurora.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-10-19Merge remote-tracking branch ↵Peter Maydell1-2/+4
'remotes/kraxel/tags/opengl-20171017-pull-request' into staging ui: opengl updates for dma-buf support. # gpg: Signature made Tue 17 Oct 2017 12:13:36 BST # gpg: using RSA key 0x4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/opengl-20171017-pull-request: egl-headless: add dmabuf support egl-helpers: add egl_texture_blit and egl_texture_blend egl-helpers: add dmabuf import support opengl: add flipping vertex shader opengl: move shader init from console-gl.c to shader.c console: add support for dmabufs Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-10-17opengl: add flipping vertex shaderGerd Hoffmann1-1/+3
Add vertex shader which flips the texture upside down while blitting it. Add argument to qemu_gl_run_texture_blit() to enable flipping. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20171010135453.6704-4-kraxel@redhat.com
2017-10-17opengl: move shader init from console-gl.c to shader.cGerd Hoffmann1-1/+1
With the upcoming dmabuf support in qemu there will be more users of the shaders than just console-gl.c. So rename ConsoleGLState to QemuGLShader, rename some functions too, move code from console-gl.c to shaders.c. No functional change. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20171010135453.6704-3-kraxel@redhat.com
2017-10-16tools: add qemu-keymapGerd Hoffmann1-0/+5
qemu-keymap generates qemu reverse keymaps from xkb keymaps, which can be used with the qemu "-k" command line switch. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20171005153330.19210-2-kraxel@redhat.com
2017-10-16ui: convert common input code to keycodemapdbDaniel P. Berrange1-0/+3
Replace the number_to_qcode, qcode_to_number and linux_to_qcode tables with automatically generated tables. Missing entries in linux_to_qcode now fixed: KEY_LINEFEED -> Q_KEY_CODE_LF KEY_KPEQUAL -> Q_KEY_CODE_KP_EQUALS KEY_COMPOSE -> Q_KEY_CODE_COMPOSE KEY_AGAIN -> Q_KEY_CODE_AGAIN KEY_PROPS -> Q_KEY_CODE_PROPS KEY_UNDO -> Q_KEY_CODE_UNDO KEY_FRONT -> Q_KEY_CODE_FRONT KEY_COPY -> Q_KEY_CODE_COPY KEY_OPEN -> Q_KEY_CODE_OPEN KEY_PASTE -> Q_KEY_CODE_PASTE KEY_CUT -> Q_KEY_CODE_CUT KEY_HELP -> Q_KEY_CODE_HELP KEY_MEDIA -> Q_KEY_CODE_MEDIASELECT In addition, some fixes: - KEY_PLAYPAUSE now maps to Q_KEY_CODE_AUDIOPLAY, instead of KEY_PLAYCD. KEY_PLAYPAUSE is defined across almost all scancodes sets, while KEY_PLAYCD only appears in AT set1, so the former is a more useful mapping. Missing entries in qcode_to_number now fixed: Q_KEY_CODE_AGAIN -> 0x85 Q_KEY_CODE_PROPS -> 0x86 Q_KEY_CODE_UNDO -> 0x87 Q_KEY_CODE_FRONT -> 0x8c Q_KEY_CODE_COPY -> 0xf8 Q_KEY_CODE_OPEN -> 0x64 Q_KEY_CODE_PASTE -> 0x65 Q_KEY_CODE_CUT -> 0xbc Q_KEY_CODE_LF -> 0x5b Q_KEY_CODE_HELP -> 0xf5 Q_KEY_CODE_COMPOSE -> 0xdd Q_KEY_CODE_KP_EQUALS -> 0x59 Q_KEY_CODE_MEDIASELECT -> 0xed In addition, some fixes: - Q_KEY_CODE_MENU was incorrectly mapped to the compose scancode (0xdd) and is now mapped to 0x9e - Q_KEY_CODE_FIND was mapped to 0xe065 (Search) instead of to 0xe041 (Find) - Q_KEY_CODE_HIRAGANA was mapped to 0x70 (Katakanahiragana) instead of of 0x77 (Hirigana) - Q_KEY_CODE_PRINT was mapped to 0xb7 which is not a defined scan code in AT set 1, it is now mapped to 0x54 (sysrq) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170929101201.21039-5-berrange@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-10-16ui: add keycodemapdb repository as a GIT submoduleDaniel P. Berrange1-1/+23
The https://gitlab.com/keycodemap/keycodemapdb/ repo contains a data file mapping between all the different scancode/keycode/keysym sets that are known, and a tool to auto-generate lookup tables for different combinations. It is used by GTK-VNC, SPICE-GTK and libvirt for mapping keys. Using it in QEMU will let us replace many hand written lookup tables with auto-generated tables from a master data source, reducing bugs. Adding new QKeyCodes will now only require the master table to be updated, all ~20 other tables will be automatically updated to follow. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170929101201.21039-4-berrange@redhat.com [ kraxel: fix build ] [ kraxel: switch repo to qemu.git mirror ] Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-10-16build: automatically handle GIT submodule checkout for dtcDaniel P. Berrange1-1/+23
Currently if DTC is required by configure and not available in the host OS install, we exit with an error message telling the user to checkout a git submodule or install the library. This introduces automatic handling of the git submodule checkout process and enables it for dtc. This only runs if building from GIT, so users of release tarballs still need the system library install. The current state of the git checkout is stashed in .git-submodule-status, and a helper program is used to determine if this state matches the desired submodule state. A dependency against 'Makefile' ensures that the submodule state is refreshed at the start of the build process Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170929101201.21039-2-berrange@redhat.com [ kraxel: use /bin/sh not bash for scripts/git-submodule.sh ] [ kraxel: fix Makefile dependencies ] Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> [fixup] Makefile dep
2017-10-10build-sys: make vhost-user-scsi depend on libvhost-user.aMarc-André Lureau1-1/+1
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2017-10-10build-sys: fix libvhost-user.a buildMarc-André Lureau1-0/+1
And actually link to it from vhost-user-bridge. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-09-26docs: add qemu-block-drivers(7) man pageStefan Hajnoczi1-1/+5
Block driver documentation is available in qemu-doc.html. It would be convenient to have documentation for formats, protocols, and filter drivers in a man page. Extract the relevant part of qemu-doc.html into a new file called docs/qemu-block-drivers.texi. This file can also be built as a stand-alone document (man, html, etc). Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-09-23Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-1/+6
* Speed up AddressSpaceDispatch creation (Alexey) * Fix kvm.c assert (David) * Memory fixes and further speedup (me) * Persistent reservation manager infrastructure (me) * virtio-serial: add enable_backend callback (Pavel) * chardev GMainContext fixes (Peter) # gpg: Signature made Fri 22 Sep 2017 20:07:33 BST # gpg: using RSA key 0xBFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (32 commits) chardev: remove context in chr_update_read_handler chardev: use per-dev context for io_add_watch_poll chardev: add Chardev.gcontext field chardev: new qemu_chr_be_update_read_handlers() scsi: add persistent reservation manager using qemu-pr-helper scsi: add multipath support to qemu-pr-helper scsi: build qemu-pr-helper scsi, file-posix: add support for persistent reservation management memory: Share special empty FlatView memory: seek FlatView sharing candidates among children subregions memory: trace FlatView creation and destruction memory: Create FlatView directly memory: Get rid of address_space_init_shareable memory: Rework "info mtree" to print flat views and dispatch trees memory: Do not allocate FlatView in address_space_init memory: Share FlatView's and dispatch trees between address spaces memory: Move address_space_update_ioeventfds memory: Alloc dispatch tree where topology is generared memory: Store physical root MR in FlatView memory: Rename mem_begin/mem_commit/mem_add helpers ... # Conflicts: # configure
2017-09-22scsi: add multipath support to qemu-pr-helperPaolo Bonzini1-0/+3
Proper support of persistent reservation for multipath devices requires communication with the multipath daemon, so that the reservation is registered and applied when a path comes up. The device mapper utilities provide a library to do so; this patch makes qemu-pr-helper.c detect multipath devices and, when one is found, delegate the operation to libmpathpersist. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-22scsi: build qemu-pr-helperPaolo Bonzini1-1/+3
Introduce a privileged helper to run persistent reservation commands. This lets virtual machines send persistent reservations without using CAP_SYS_RAWIO or out-of-tree patches. The helper uses Unix permissions and SCM_RIGHTS to restrict access to processes that can access its socket and prove that they have an open file descriptor for a raw SCSI device. The next patch will also correct the usage of persistent reservations with multipath devices. It would also be possible to support for Linux's IOC_PR_* ioctls in the future, to support NVMe devices. For now, however, only SCSI is supported. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-22Makefile: Add rules to run vm testsFam Zheng1-0/+2
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Fam Zheng <famz@redhat.com>
2017-09-19Makefile: Remove libqemustub.aPaolo Bonzini1-4/+3
Using two libraries (libqemuutil.a and libqemustub.a) would sometimes result in circular dependencies. To avoid these issues let's just combine both into a single library that functions as both. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Message-Id: <54e6458745493d10901964624479a7d9a872f481.1503077821.git.alistair.francis@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-13pixman: drop submoduleGerd Hoffmann1-10/+0
Drop pixman submodule and support for the "internal" pixman build. pixman should be reasonably well established meanwhile so we don't need the fallback submodule any more. While being at it also drop some #ifdefs for pixman versions older than what we require in configure anyway. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20170905140116.28181-2-kraxel@redhat.com
2017-09-04qapi-schema: Fold event.json back into qapi-schema.jsonMarkus Armbruster1-1/+1
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1503602048-12268-14-git-send-email-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-09-04qapi-schema: Collect TPM stuff in qapi/tpm.jsonMarkus Armbruster1-0/+1
Sadly, we don't have a TPM maintainer, not even a MAINTAINERS entry. Create one, and mark it orphaned. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1503602048-12268-12-git-send-email-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-09-04qapi-schema: Collect transaction stuff in qapi/transaction.jsonMarkus Armbruster1-0/+1
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1503602048-12268-11-git-send-email-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-09-04qapi-schema: Collect migration stuff in qapi/migration.jsonMarkus Armbruster1-0/+1
Cc: Juan Quintela <quintela@redhat.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1503602048-12268-10-git-send-email-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-09-04qapi-schema: Collect UI stuff in qapi/ui.jsonMarkus Armbruster1-1/+2
UI stuff is remote desktop stuff (Spice, VNC) and input stuff (mouse, keyboard). Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1503602048-12268-9-git-send-email-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
2017-09-04qapi-schema: Collect net device stuff in qapi/net.jsonMarkus Armbruster1-0/+1
Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1503602048-12268-8-git-send-email-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-09-04qapi-schema: Collect char device stuff in qapi/char.jsonMarkus Armbruster1-0/+1
Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1503602048-12268-7-git-send-email-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-09-04qapi-schema: Collect run state stuff in qapi/run-state.jsonMarkus Armbruster1-0/+1
Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1503602048-12268-6-git-send-email-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-09-04qapi-schema: Collect sockets stuff in qapi/sockets.jsonMarkus Armbruster1-1/+3
Cc: "Daniel P. Berrange" <berrange@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1503602048-12268-5-git-send-email-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-08-15Makefile: Let "make check-help" work without running ./configureFam Zheng1-2/+0
Currently if you do "make check-help" in a fresh checkout, only an error is printed which is not nice: $ make check-help V=1 cc -nostdlib -o check-help.mo cc: fatal error: no input files compilation terminated. rules.mak:115: recipe for target 'check-help.mo' failed make: *** [check-help.mo] Error 1 Move the config-host.mak condition into the body of tests/Makefile.include and always include the rule for check-help. Reported-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Fam Zheng <famz@redhat.com> Message-Id: <20170810085025.14076-1-famz@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Fam Zheng <famz@redhat.com>
2017-07-31build-sys: there is no qemu-ga.cMarc-André Lureau1-1/+1
It got moved in qga/main.c from commit 2870dc3456c9c. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-07-20configure: Don't build ivshmem tools unless CONFIG_IVSHMEM is setKamil Rytarowski1-0/+2
Don't try to build the ivshmem-server and ivshmem-client tools unless CONFIG_IVSHMEM is set. This fixes in passing a build bug on NetBSD, which fails to build the ivshmem tools because they use shm_open() and on NetBSD that requires linking against -lrt. Signed-off-by: Kamil Rytarowski <n54@gmx.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1500021225-4118-4-git-send-email-peter.maydell@linaro.org [PMM: moved some code into earlier patches; minor bugfixes; added commit message] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-14pc-bios/s390: add s390-netboot.imgChristian Borntraeger1-1/+1
It's already possible to do a network boot of an s390x guest with an external netboot image based on a Linux installation, but it would be much more convenient if the s390-ccw firmware supported network booting right out of the box, without the need to assemble such an external image first. This is an s390-netboot.img that can be used for network booting. You can download a combined kernel + initrd image via TFTP by starting QEMU for example with: qemu-system-s390x ... -device virtio-net,netdev=n1,bootindex=1 \ -netdev user,id=n1,tftp=/path/to/tftp,bootfile=kernel.img Note that this version does not support downloading via config files (i.e. pxelinux config files or .INS config files) yet. This will be added later. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-06-15vhost-user-scsi: Introduce a vhost-user-scsi sample applicationFelipe Franciosi1-0/+3
This commit introduces a vhost-user-scsi backend sample application. It must be linked with libiscsi and libvhost-user. To use it, compile with: $ make vhost-user-scsi And run as follows: $ ./vhost-user-scsi -u vus.sock -i iscsi://uri_to_target/ $ qemu-system-x86_64 --enable-kvm -m 512 \ -object memory-backend-file,id=mem,size=512m,share=on,mem-path=guestmem \ -numa node,memdev=mem \ -chardev socket,id=vhost-user-scsi,path=vus.sock \ -device vhost-user-scsi-pci,chardev=vhost-user-scsi \ The application is currently limited at one LUN only and it processes requests synchronously (therefore only achieving QD1). The purpose of the code is to show how a backend can be implemented and to test the vhost-user-scsi Qemu implementation. If a different instance of this vhost-user-scsi application is executed at a remote host, a VM can be live migrated to such a host. Signed-off-by: Felipe Franciosi <felipe@nutanix.com> Message-Id: <1488479153-21203-5-git-send-email-felipe@nutanix.com>
2017-06-15qemu-doc: include version numberPaolo Bonzini1-12/+5
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-15docs: create interop/ subdirectoryPaolo Bonzini1-29/+40
This is for the future interoperability & management guide. It includes the QAPI docs, including the automatically generated ones, other socket protocols (vhost-user, VNC), and the qcow2 file format. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-15Makefile: Do not generate files if "configure" has not been run yetThomas Huth1-0/+2
When doing a "make -j10" in the vanilla QEMU source tree (without running "configure" first), the Makefile currently generates two files already, qemu-version.h and qemu-options.def. This should not happen, so let's only build the generated files if config-host.mak is available (i.e. "configure" has been run already). Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1496926799-13040-1-git-send-email-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-05-11Add QemuMacDrivers qemu_vga.ndrv revision d4e7d7a built as submoduleMark Cave-Ayland1-1/+2
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-04-21trace: Put all trace.o into libqemuutil.aXu, Anthony1-3/+3
Currently all trace.o are linked into qemu-system, qemu-img, qemu-nbd, qemu-io etc., even the corresponding components are not included. Put all trace.o into libqemuutil.a that the linker would only pull in .o files containing symbols that are actually referenced by the program. Signed-off -by: Anthony Xu <anthony.xu@intel.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-03-21qapi: Drop excessive Make dependencies on qapi2texi.pyMarkus Armbruster1-3/+4
When qapi2texi.py changes, we regenerate everything QAPI. Screwed up in commit 56e8bdd. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1490015515-25851-2-git-send-email-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-03-19xen: do not build backends for targets that do not support xenStefano Stabellini1-0/+1
Change Makefile.objs to use CONFIG_XEN instead of CONFIG_XEN_BACKEND, so that the Xen backends are only built for targets that support Xen. Set CONFIG_XEN in the toplevel Makefile to ensure that files that are built only once pick up Xen support properly. Signed-off-by: Stefano Stabellini <stefano@aporeto.com> Tested-by: Greg Kurz <groug@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> CC: pbonzini@redhat.com CC: peter.maydell@linaro.org CC: rth@twiddle.net CC: stefanha@redhat.com Message-Id: <1489694518-16978-1-git-send-email-sstabellini@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-03-16Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' ↵Peter Maydell1-20/+22
into staging Pull request Tracing makefile fixes for QEMU 2.9. # gpg: Signature made Thu 16 Mar 2017 06:56:10 GMT # gpg: using RSA key 0x9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/tracing-pull-request: trace: ensure $(tracetool-y) is defined in top level makefile makefile: generate trace-events-all upfront makefile: merge GENERATED_HEADERS & GENERATED_SOURCES variables Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-03-16qapi: Clean up build of generated documentationMarkus Armbruster1-12/+15
Rename intermediate qemu-qapi.texi to qemu-qmp-qapi.texi to match its user qemu-qmp-ref.texi, just like qemu-ga-qapi.texi matches qemu-ga-ref.texi. Build the intermediate .texi next to the sources and the final output in docs/ instead of dumping them into the build root. Fix version.texi dependencies so that only the targets that actually need it depend on it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1489582656-31133-8-git-send-email-armbru@redhat.com>
2017-03-16trace: ensure $(tracetool-y) is defined in top level makefileDaniel P. Berrange1-0/+3
The build rules for trace files have a dependancy on $(tracetool-y). This variable populated in the trace/Makefile.objs file and thus its definition gets pulled into the top level makefile. This happens too late in the process though, so by the time $(tracetool-y) is defined, make has already evaluated $(tracetool-y) in the dependancies and found it to be empty. The result is that when the tracetool source is changed, the generated files are not rebuilt. The solution is to define the variable in the top level makefile too Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Tested-by: Eric Blake <eblake@redhat.com> Message-id: 20170315123421.28815-1-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-03-16makefile: generate trace-events-all upfrontDaniel P. Berrange1-2/+2
Files should not be created in the build dir during the 'make install' phase. List 'trace-events-all' as a generated file so that it gets created upfront during build. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Message-id: 20170228122901.24520-3-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-03-16makefile: merge GENERATED_HEADERS & GENERATED_SOURCES variablesDaniel P. Berrange1-18/+17
The only functional difference between the GENERATED_HEADERS and GENERATED_SOURCES variables is that 'Makefile' has a dependancy on GENERATED_HEADERS, causing generated header files to be created immediatey at the start of the build process. There is no reason why this early creation should be restricted to the .h files, and not include .c files too. Merge both of the variables into a single GENERATED_FILES variable to make it clear it is for any type of generated file. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Message-id: 20170228122901.24520-2-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-02-20Makefile: Put VERSION info into version.texi rather than using -DPeter Maydell1-7/+10
Unfortunately some older versions of makeinfo don't correctly handle the -D command line option and fail to set the variable. This then causes them to complain docs/qemu-ga-ref.texi:41: warning: undefined flag: VERSION Work around this by doing as the autotools do, and writing the information into a version.texi file which we then include from the .texi files that need it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1487357968-31000-1-git-send-email-peter.maydell@linaro.org> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-02-16Makefile: avoid leaving the temporary QEMU_PKGVERSION header fileLin Ma1-1/+5
By commit 67a1de0d, When we perform 'git pull && make && sudo make install', In 'make' stage a qemu-version.h.tmp will be generated. If the content of qemu-version.h.tmp and qemu-version.h aren't consistent, The qemu-version.h.tmp will be renamed to qemu-version.h. Because of the target FORCE, The same action will be do again in 'make install' stage. In 'make install' stage, If there is no qemu-version.h.tmp exists and we run 'make install' with sudo, The owner and group of new qemu-version.h.tmp will be privileged user/group. When we run 'make' next time, qemu-version.h.tmp can't be overwritten because of permission issue. This patch removed qemu-version.h.tmp after build to fix this issue. Signed-off-by: Lin Ma <lma@suse.com> Message-Id: <20170215024030.23895-1-lma@suse.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.1 (git 2.18.0) at 2024-06-08 01:56:22 +0000