summaryrefslogtreecommitdiff
path: root/block.c
AgeCommit message (Collapse)AuthorFilesLines
2016-01-07block: use drained section in bdrv_closePaolo Bonzini1-1/+3
bdrv_close is used when ejecting a medium. Use a drained section to ensure that all I/O goes to either the old medium or the bitbucket. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1450867706-19860-2-git-send-email-pbonzini@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-18block: Add opaque value to the amend CBMax Reitz1-2/+2
Add an opaque value which is to be passed to the bdrv_amend_options() status callback. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-12-18block: Move cache options into options QDictKevin Wolf1-4/+96
This adds the cache mode options to the QDict, so that they can be specified for child nodes (e.g. backing.cache.direct=off). The cache modes are not removed from the flags at this point; instead, options and flags are kept in sync. If the user specifies both flags and options, the options take precedence. Child node inherit cache modes as options now, they don't use flags any more. Note that this forbids specifying the cache mode for empty drives. It didn't make sense anyway to specify it there, because it didn't have any effect. blockdev_init() considers the cache options now bdrv_open() options and therefore doesn't create an empty drive any more but calls into bdrv_open(). This in turn will fail with no driver and filename specified. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2015-12-18block: reopen: Extract QemuOpts for generic block layer optionsKevin Wolf1-0/+24
This patch adds a QemuOpts for generic block layer options to bdrv_reopen_prepare(). The only two options that currently exist (node-name and driver) cannot be changed, so the only thing we do is putting them right back into the QDict so that we check at the end that they are indeed unchanged. We will add new options soon that can actually be changed. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2015-12-18block: Introduce bs->explicit_optionsKevin Wolf1-2/+22
bs->options doesn't only contain options that the user explicitly requested, but also option that were derived from flags, the filename or inherited from the parent node. For reopen, it is important to know the difference because reopening the parent can change inherited values in child nodes, but it shouldn't change any options that were explicitly specified for the child. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2015-12-18block: Split out parse_json_protocol()Kevin Wolf1-18/+32
The next patch distinguishes options that were explicitly set and options that were derived. bdrv_fill_option() added options of both types: Options given by json: syntax should be counted as explicit, but the rest is derived. In preparation for the distinction, move json: parse to a separate function. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2015-12-18block: Add infrastructure for option inheritanceKevin Wolf1-21/+31
Options are not actually inherited from the parent node yet, but this commit lays the grounds for doing so. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2015-12-18block: reopen: Document option precedence and refactor accordinglyKevin Wolf1-6/+33
The interesting part of reopening an image is from which sources the effective options should be taken, i.e. which options take precedence over which other options. This patch documents the precedence that will be implemented in the following patches. It also refactors bdrv_reopen_queue(), so that the top-level reopened node is handled the same way as children are. Option/flag inheritance from the parent becomes just one item in the list and is done at the beginning of the function, similar to how the other items are/will be handled. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2015-12-18block: Allow specifying child options in reopenKevin Wolf1-2/+10
If the child was defined in the same context (-drive argument or blockdev-add QMP command) as its parent, a reopen of the parent should work the same and allow changing options of the child. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com>
2015-12-18block: Keep "driver" in bs->optionsKevin Wolf1-17/+40
Instead of passing a separate drv argument to bdrv_open_common(), just make sure that a "driver" option is set in the QDict. This also means that a "driver" entry is consistently present in bs->options now. This is another step towards keeping all options in the QDict (which is the represenation of the blockdev-add QMP command). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2015-12-18block: Pass driver-specific options to .bdrv_refresh_filename()Kevin Wolf1-1/+4
In order to decide whether a blkdebug: filename can be produced or a json: one is necessary, blkdebug checked whether bs->options had more options than just "config", "x-image" or "image" (the latter including nested options). That doesn't work well when generic block layer options are present. This patch passes an option QDict to the driver that contains only driver-specific options, i.e. the options for the general block layer as well as child nodes are already filtered out. Works much better this way. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com>
2015-12-18block: Exclude nested options only for children in append_open_options()Kevin Wolf1-4/+16
Some drivers have nested options (e.g. blkdebug rule arrays), which don't belong to a child node and shouldn't be removed. Don't remove all options with "." in their name, but check for the complete prefixes of actually existing child nodes. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2015-12-18block: Consider all block layer options in append_open_optionsKevin Wolf1-8/+18
The code already special-cased "node-name", which is currently the only option passed in the QDict that isn't driver-specific. Generalise the code to take all general block layer options into consideration. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com>
2015-12-18block: Allow references for backing filesKevin Wolf1-19/+29
For bs->file, using references to existing BDSes has been possible for a while already. This patch enables the same for bs->backing. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2015-12-18block: Fix reopen with semantically overlapping optionsKevin Wolf1-1/+15
This fixes bdrv_reopen() calls like the following one: qemu-io -c 'open -o overlap-check.template=all /tmp/test.qcow2' \ -c 'reopen -o overlap-check=none' The approach taken so far would result in an options QDict that has both "overlap-check.template=all" and "overlap-check=none", which obviously conflicts. In this case, the old option should be overridden by the newly specified option. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com>
2015-12-17blkdebug: Merge hand-rolled and qapi BlkdebugEvent enumEric Blake1-1/+1
No need to keep two separate enums, where editing one is likely to forget the other. Now that we can specify a qapi enum prefix, we don't even have to change the bulk of the uses. get_event_by_name() could perhaps be replaced by qapi_enum_parse(), but I left that for another day. CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1447836791-369-20-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-11-12qed: Implement .bdrv_drainFam Zheng1-2/+17
The "need_check_timer" is used to clear the "NEED_CHECK" flag in the image header after a grace period once metadata update has finished. In compliance to the bdrv_drain semantics we should make sure it remains deleted once .bdrv_drain is called. We cannot reuse qed_need_check_timer_cb because here it doesn't satisfy the assertion. Do the "plug" and "flush" calls manually. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1447064214-29930-10-git-send-email-famz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-12Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2015-11-11' ↵Peter Maydell1-2/+1
into staging error: More error_setg() usage # gpg: Signature made Wed 11 Nov 2015 17:57:15 GMT using RSA key ID EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" * remotes/armbru/tags/pull-error-2015-11-11: error: More error_setg() usage Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-11error: More error_setg() usageEric Blake1-2/+1
A few uses of error_set(ERROR_CLASS_GENERIC_ERROR) were missed in c6bd8c706, or have snuck in since. Nuke them. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1447224690-9743-19-git-send-email-eblake@redhat.com> Acked-by: Andreas Färber <afaerber@suse.de> [Indentation tidied up, commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-11-11throttle: Use bs->throttle_state instead of bs->io_limits_enabledAlberto Garcia1-3/+3
There are two ways to check for I/O limits in a BlockDriverState: - bs->throttle_state: if this pointer is not NULL, it means that this BDS is member of a throttling group, its ThrottleTimers structure has been initialized and its I/O limits are ready to be applied. - bs->io_limits_enabled: if true it means that the throttle_state pointer is valid _and_ the limits are currently enabled. The latter is used in several places to check whether a BDS has I/O limits configured, but what it really checks is whether requests are being throttled or not. For example, io_limits_enabled can be temporarily set to false in cases like bdrv_read_unthrottled() without otherwise touching the throtting configuration of that BDS. This patch replaces bs->io_limits_enabled with bs->throttle_state in all cases where what we really want to check is the existence of I/O limits, not whether they are currently enabled or not. Signed-off-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-11block: support passing 'backing': '' to 'blockdev-add'Alberto Garcia1-0/+7
Passing an empty string allows opening an image but not its backing file. This was already described in the API documentation, only the implementation was missing. This is useful for creating snapshots using images opened with blockdev-add, since they are not supposed to have a backing image before the operation. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-11block: Make bdrv_states publicMax Reitz1-2/+1
When inserting a BDS tree into a BB, we will need to add the root BDS to this list. Since we will want to do that in the blockdev-insert-medium implementation in blockdev.c, we will need access to it there. This patch is not exactly elegant, but bdrv_states will be removed in the future anyway because we no longer need it since we have BBs. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-11block: Don't call blk_bs() twice in bdrv_lookup_bs()Alberto Garcia1-3/+3
Signed-off-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-10-23block: Prepare for NULL BDSMax Reitz1-0/+5
blk_bs() will not necessarily return a non-NULL value any more (unless blk_is_available() is true or it can be assumed to otherwise, e.g. because it is called immediately after a successful blk_new_with_bs() or blk_new_open()). Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-10-23block: Move I/O status and error actions into BBMax Reitz1-125/+0
These options are only relevant for the user of a whole BDS tree (like a guest device or a block job) and should thus be moved into the BlockBackend. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-10-23block: Move BlockAcctStats into BlockBackendMax Reitz1-11/+0
As the comment above bdrv_get_stats() says, BlockAcctStats is something which belongs to the device instead of each BlockDriverState. This patch therefore moves it into the BlockBackend. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-10-23block: Move guest_block_size into BlockBackendMax Reitz1-7/+0
guest_block_size is a guest device property so it should be moved into the interface between block layer and guest devices, which is the BlockBackend. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-10-23block: Invoke change media CB before NULLing drvMax Reitz1-4/+4
In order to handle host device passthrough, some guest device models may call blk_is_inserted() to check whether the medium is inserted on the host, when checking the guest tray status. This tray status is inquired by blk_dev_change_media_cb(); because bdrv_is_inserted() (invoked by blk_is_inserted()) always returns false for BDS with drv set to NULL, blk_dev_change_media_cb() should therefore be called before drv is set to NULL. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-10-23block: Make bdrv_is_inserted() recursiveMax Reitz1-3/+9
If bdrv_is_inserted() is called on the top level BDS, it should make sure all nodes in the BDS tree are actually inserted. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-10-23block: Make bdrv_is_inserted() return a boolMax Reitz1-5/+7
Make bdrv_is_inserted(), blk_is_inserted(), and the callback BlockDriver.bdrv_is_inserted() return a bool. Suggested-by: Eric Blake <eblake@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-10-23block: Set BDRV_O_INCOMING in bdrv_fill_options()Max Reitz1-0/+4
This flag should not be set for the root BDS only, but for any BDS that is being created while incoming migration is pending, so setting it is moved from blockdev_init() to bdrv_fill_options(). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-10-20coroutine: move into libqemuutil.a libraryDaniel P. Berrange1-1/+1
The coroutine files are currently referenced by the block-obj-y variable. The coroutine functionality though is already used by more than just the block code. eg migration code uses coroutine yield. In the future the I/O channel code will also use the coroutine yield functionality. Since the coroutine code is nicely self-contained it can be easily built as part of the libqemuutil.a library, making it widely available. The headers are also moved into include/qemu, instead of the include/block directory, since they are now part of the util codebase, and the impl was never in the block/ directory either. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-10-16block: auto-generated node-namesJeff Cody1-7/+12
If a node-name is not specified, automatically generate the node-name. Generated node-names will use the "block" sub-system identifier. Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-10-16block: Allow bdrv_unref_child(bs, NULL)Kevin Wolf1-1/+6
bdrv_unref() can be called with a NULL argument and doesn't do anything then. Make bdrv_unref_child() consistent with it. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com>
2015-10-16block: Remove bdrv_swap()Kevin Wolf1-154/+1
bdrv_swap() is unused now. Remove it and all functions that have no other users than bdrv_swap(). In particular, this removes the .bdrv_rebind callbacks from block drivers. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-10-16block: Add and use bdrv_replace_in_backing_chain()Kevin Wolf1-1/+31
This cleans up the mess we left behind in the mirror code after the previous patch. Instead of using bdrv_swap(), just change pointers. The interface change of the mirror job that callers must consider is that after job completion, their local BDS pointers still point to the same node now. qemu-img must change its code accordingly (which makes it easier to understand); the other callers stays unchanged because after completion they don't do anything with the BDS, but just with the job, and the job is still owned by the source BDS. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-10-16block: Implement bdrv_append() without bdrv_swap()Kevin Wolf1-28/+84
Remember all parent nodes and just change the pointers there instead of swapping the contents of the BlockDriverState. Handling of snapshot=on must be moved further down in bdrv_open() because *pbs (which is the bs pointer in the BlockBackend) must already be set before bdrv_append() is called. Otherwise bdrv_append() changes the BB's pointer to the temporary snapshot, but bdrv_open() overwrites it with the read-only original image. We also need to be careful to update callers as the interface changes (becomes less insane): Previously, the meaning of the two parameters was inverted when bdrv_append() returns. Now any BDS pointers keep pointing to the same node. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-10-16block: Introduce parents listKevin Wolf1-0/+3
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-10-16block: Split bdrv_move_feature_fields()Kevin Wolf1-0/+12
After bdrv_swap(), some fields must be moved back to their original BDS to compensate for the effects that a swap of the contents of the objects has while keeping the old addresses. Other fields must be moved back because they should logically be moved and must stay on top When replacing bdrv_swap() with operations changing the pointers in the parents, we only need the latter and must avoid swapping the former. Split the function accordingly. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-10-16block: Manage backing file references in bdrv_set_backing_hd()Kevin Wolf1-50/+18
This simplifies the code somewhat, especially when dropping whole backing file subchains. The exception is the mirroring code that does adventurous things with bdrv_swap() and in order to keep it working, I had to duplicate most of bdrv_set_backing_hd() locally. We'll get rid again of this ugliness shortly. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-10-16block: Convert bs->backing_hd to BdrvChildKevin Wolf1-52/+53
This is the final step in converting all of the BlockDriverState pointers that block drivers use to BdrvChild. After this patch, bs->children contains the full list of child nodes that are referenced by a given BDS, and these children are only referenced through BdrvChild, so that updating the pointer in there is enough for changing edges in the graph. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-10-16block: Remove bdrv_open_image()Kevin Wolf1-34/+0
It is unused now. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-10-16block: Convert bs->file to BdrvChildKevin Wolf1-33/+30
This patch removes the temporary duplication between bs->file and bs->file_child by converting everything to BdrvChild. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-10-16block: Introduce BDS.file_childKevin Wolf1-3/+9
Store the BdrvChild for bs->file. At this point, bs->file_child->bs just duplicates the bs->file pointer. Later, it will completely replace it. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-10-02block: disable I/O limits at the beginning of bdrv_close()Alberto Garcia1-5/+6
Disabling I/O limits from a BDS also drains all pending throttled requests, so it should be done at the beginning of bdrv_close() with the rest of the bdrv_drain() calls before the BlockDriver is closed. Signed-off-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-09-14block: Allow specifying driver-specific options to reopenKevin Wolf1-3/+39
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2015-09-14block: Drop bdrv_find_whitelisted_format()Max Reitz1-7/+0
It is unused by now, so we can drop it. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-09-14block: Drop drv parameter from bdrv_fill_options()Max Reitz1-37/+22
Now that this parameter is effectively unused, we can drop it and change the function accordingly. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-09-14block: Drop drv parameter from bdrv_open_inherit()Max Reitz1-10/+7
Now that this parameter is effectively unused, we can drop it and just pass NULL to bdrv_fill_options(). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-09-14block: Drop drv parameter from bdrv_open()Max Reitz1-5/+4
Now that this parameter is effectively unused, we can drop it and just pass NULL on to bdrv_open_inherit(). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.2.1 (git 2.18.0) at 2024-07-06 06:05:29 +0000