summaryrefslogtreecommitdiff
path: root/block/blkdebug.c
AgeCommit message (Collapse)AuthorFilesLines
2014-02-21block: Remove bdrv_open_image()'s force_raw optionMax Reitz1-1/+1
This option is now unnecessary since specifying BDRV_O_PROTOCOL as flag will do exactly the same. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-02-21block: Change BDS parameter of bdrv_open() to **Max Reitz1-0/+1
Make bdrv_open() take a pointer to a BDS pointer, similarly to bdrv_file_open(). If a pointer to a NULL pointer is given, bdrv_open() will create a new BDS with an empty name; if the BDS pointer is not NULL, that existing BDS will be reused (in the same way as bdrv_open() already did). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-02-17Use error_is_set() only when necessaryMarkus Armbruster1-2/+2
error_is_set(&var) is the same as var != NULL, but it takes whole-program analysis to figure that out. Unnecessarily hard for optimizers, static checkers, and human readers. Dumb it down to obvious. Gets rid of several dozen Coverity false positives. Note that the obvious form is already used in many places. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-02-09blkdebug: Don't leak bs->file on failureKevin Wolf1-5/+9
Reported-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2014-01-24qemu-iotests: Test pwritev RMW logicKevin Wolf1-0/+8
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2014-01-24blkdebug: Make required alignment configurableKevin Wolf1-0/+16
The new 'align' option of blkdebug can be used in order to emulate backends with a required 4k alignment on hosts which only really require 512 byte alignment. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22blkdebug: Allow command-line file configurationMax Reitz1-9/+3
Introduce the "image" option as an alternative to specifying the image through the filename. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22block: Allow reference for bdrv_file_open()Max Reitz1-1/+1
Allow specifying a reference to an existing block device (by name) for bdrv_file_open() instead of a filename and/or options. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22blkdebug: Use command-line in read_config()Max Reitz1-3/+12
Use qemu_config_parse_qdict() to parse the command-line options in addition to the config file. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22blkdebug: Always call read_config()Max Reitz1-17/+19
Move the check whether there actually is a config file into the read_config() function. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22blkdebug: Don't require sophisticated filenameMax Reitz1-1/+3
If the filename is not prefixed by "blkdebug:" in blkdebug_parse_filename(), the blkdebug driver was not selected through that protocol prefix, but by an explicit command line option (file.driver=blkdebug or something similar). Contrary to the current reaction, this is not a problem at all; we just need to store the filename (in the x-image option) and can go on; the user just has to manually specify the config option. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22blkdebug: Use errp for read_config()Max Reitz1-4/+6
Use an Error variable in the read_config() function. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-06qemu-option: Remove qemu_opts_create_nofailPeter Crosthwaite1-1/+1
This is a boiler-plate _nofail variant of qemu_opts_create. Remove and use error_abort in call sites. null/0 arguments needs to be added for the id and fail_if_exists fields in affected callsites due to argument inconsistency between the normal and no_fail variants. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-12-13blkdebug: Use QLIST_FOREACH_SAFE to resume IOFam Zheng1-4/+4
Qemu-iotest 030 was broken. When the coroutine runs and finishes, it will remove itself from the req list, so let's use safe version of foreach to avoid use after free. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-11-29blkdebug: add "remove_break" commandFam Zheng1-0/+27
This adds "remove_break" command which is the reverse of blkdebug command "break": it removes all breakpoints with given tag and resumes all the requests. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-10-11blkdebug: Employ error parameterMax Reitz1-4/+4
Make use of the error parameter in blkdebug_open. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-09-12block: Error parameter for open functionsMax Reitz1-1/+3
Add an Error ** parameter to bdrv_open, bdrv_file_open and associated functions to allow more specific error messages. Signed-off-by: Max Reitz <mreitz@redhat.com>
2013-09-12bdrv: Use "Error" for opening imagesMax Reitz1-1/+2
Add an Error ** parameter to BlockDriver.bdrv_open and BlockDriver.bdrv_file_open to allow more specific error messages. Signed-off-by: Max Reitz <mreitz@redhat.com>
2013-09-02qcow2-refcount: Repair shared refcount blocksMax Reitz1-0/+1
If the refcount of a refcount block is greater than one, we can at least try to repair that problem by duplicating the affected block. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-06blkdebug: Add BLKDBG_FLUSH_TO_OS/DISK eventsKevin Wolf1-0/+3
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-22block: Remove filename parameter from .bdrv_file_open()Kevin Wolf1-2/+1
It is unused now in all block drivers. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2013-04-22blkdebug: Use bdrv_open options instead of filenameKevin Wolf1-32/+82
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2013-03-22block: Add options QDict to bdrv_file_open() prototypesKevin Wolf1-2/+3
The new parameter is unused yet. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2012-12-19misc: move include files to include/qemu/Paolo Bonzini1-2/+2
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19block: move include files to include/block/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19janitor: do not rely on indirect inclusions of or from qemu-char.hPaolo Bonzini1-0/+1
Various header files rely on qemu-char.h including qemu-config.h or main-loop.h, but they really do not need qemu-char.h at all (particularly interesting is the case of the block layer!). Clean this up, and also add missing inclusions of qemu-char.h itself. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-12blkdebug: Implement suspend/resume of AIO requestsKevin Wolf1-3/+105
This allows more systematic AIO testing. The patch adds three new operations to blkdebug: * Setting a "breakpoint" on a blkdebug event. The next request that triggers this breakpoint is suspended and is tagged with a name. The breakpoint is removed after a request has triggered it. * A suspended request (identified by it's tag) can be resumed * It's possible to check whether a suspended request with a given tag exists. This can be used for waiting for an event. Ideally, we would instead tag requests right when they are created and set breakpoints for individual requests. However, at this point the block layer doesn't allow this easily, and breakpoints that trigger for any request already allow a lot of useful testing. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-12-12blkdebug: Factor out remove_rule()Kevin Wolf1-2/+13
The cleanup work to remove a rule depends on the type of the rule. It's easy for the existing rules as there is no data that must be cleaned up and is specific to a type yet, but the next patch will change this. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-12-12blkdebug: Allow usage without config fileKevin Wolf1-0/+5
As soon as new rules can be set during runtime, as introduced by the next patch, blkdebug makes sense even without a config file. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-11-14aio: rename AIOPool to AIOCBInfoStefan Hajnoczi1-2/+2
Now that AIOPool no longer keeps a freelist, it isn't really a "pool" anymore. Rename it to AIOCBInfo and make it const since it no longer needs to be modified. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-28blkdebug: process all set_state rules in the old statePaolo Bonzini1-5/+7
Currently it is impossible to write a blkdebug script that ping-pongs between two states, because the second set-state rule will use the state that is set in the first. If you have [set-state] event = "..." state = "1" new_state = "2" [set-state] event = "..." state = "2" new_state = "1" for example the state will remain locked at 1. This can be fixed by first processing all rules, and then setting the state. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-09blkdebug: optionally tie errors to a specific sectorPaolo Bonzini1-2/+24
This makes blkdebug scripts more powerful, and independent of the exact sequence of operations performed by streaming. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-09blkdebug: store list of active rulesPaolo Bonzini1-38/+31
This prepares for the next patch, where some active rules may actually not trigger depending on input to readv/writev. Store the active rules in a SIMPLEQ (so that it can be emptied easily with QSIMPLEQ_INIT), and fetch the errno/once/immediately arguments from there. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-09blkdebug: pass getlength to underlying filePaolo Bonzini1-0/+6
This is required when using blkdebug with raw format. Unlike qcow2/QED, raw asks blkdebug for the length of the file, it doesn't get it from a header. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-09blkdebug: tiny cleanupPaolo Bonzini1-6/+2
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-09blkdebug: remove sync i/o eventsPaolo Bonzini1-2/+0
These are unused, except (by mistake more or less) in QED. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-04-05block: push recursive flushing up from driversPaolo Bonzini1-7/+0
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26block: replace unchecked strdup/malloc/calloc with glibStefan Hajnoczi1-2/+2
Most of the codebase as been converted to use glib memory allocation functions. There are still a few instances of malloc/calloc in the block layer and qemu-io. Replace them, especially since they do not check the strdup/malloc/calloc return value. Reported-by: Dr David Alan Gilbert <davidagilbert@uk.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-21block: drop redundant bdrv_flush implementationStefan Hajnoczi1-6/+0
Block drivers now only need to provide either of .bdrv_co_flush, .bdrv_aio_flush() or for legacy drivers .bdrv_flush(). Remove the redundant .bdrv_flush() implementations. [Paolo Bonzini: change raw driver to bdrv_co_flush] Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-08-20Use glib memory allocation and free functionsAnthony Liguori1-2/+2
qemu_malloc/qemu_free no longer exist after this commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-11-04block: Allow bdrv_flush to return errorsKevin Wolf1-2/+2
This changes bdrv_flush to return 0 on success and -errno in case of failure. It's a requirement for implementing proper error handle in users of bdrv_flush. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2010-09-18blkdebug: fix enum comparisonBlue Swirl1-3/+1
The signedness of enum types depend on the compiler implementation. Therefore the check for negative values may or may not be meaningful. Fix by explicitly casting to a signed integer. Since the values are also checked earlier against event_names table, this is an internal error. Change the 'if' to 'assert'. This also avoids a warning with GCC flag -Wtype-limits. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-02blkdebug: Initialize state as 1Kevin Wolf1-0/+3
state = 0 in rules means that the rule is valid for any state. Therefore it's impossible to have a rule that works only in the initial state. This changes the initial state from 0 to 1 to make this possible. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-02blkdebug: Free QemuOpts after having read the configKevin Wolf1-0/+2
Forgetting to free them means that the next instance inherits all rules and gets its own rules only additionally. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-02blkdebug: Fix set_state_opts definitionKevin Wolf1-1/+1
The list head was initialized to point to the wrong list, so all actions ended up being handled as inject-error even if they were set-state in fact. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-06-13Move stdbool.hPaul Brook1-2/+0
Move inclusion of stdbool.h to common header files, instead of including in an ad-hoc manner. Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-05-17block: Avoid unchecked casts for AIOCBsKevin Wolf1-2/+2
Use container_of for one direction and &acb->common for the other one. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-05-03block: Open the underlying image file in generic codeKevin Wolf1-11/+6
Format drivers shouldn't need to bother with things like file names, but rather just get an open BlockDriverState for the underlying protocol. This patch introduces this behaviour for bdrv_open implementation. For protocols which need to access the filename to open their file/device/connection/... a new callback bdrv_file_open is introduced which doesn't get an underlying file opened. For now, also some of the more obscure formats use bdrv_file_open because they open() the file themselves instead of using the block.c functions. They need to be fixed in later patches. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-04-23qcow2: Trigger blkdebug eventsKevin Wolf1-0/+42
This adds blkdebug events to qcow2 to allow injecting I/O errors in specific places. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-04-23blkdebug: Add events and rulesKevin Wolf1-1/+249
Block drivers can trigger a blkdebug event whenever they reach a place where it could be useful to inject an error for testing/debugging purposes. Rules are read from a blkdebug config file and describe which action is taken when an event is triggered. For now this is only injecting an error (with a few options) or changing the state (which is an integer). Rules can be declared to be active only in a specific state; this way later rules can distiguish on which path we came to trigger their event. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.2.1 (git 2.18.0) at 2024-05-10 11:12:27 +0000