summaryrefslogtreecommitdiff
path: root/block/gluster.c
AgeCommit message (Collapse)AuthorFilesLines
2014-03-05gluster: Remove unused defines and header includeBharata B Rao1-4/+0
Remove the definitions of GLUSTER_FD_WRITE and GLUSTER_FD_READ which are no longer used. Also sockets.h isn't needed any more. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-03-05gluster: Change licence to GPLv2+Bharata B Rao1-10/+2
Pipe handling mechanism in gluster driver was based on similar implementation in RBD driver and hence had GPLv2 and associated copyright information. After changing gluster driver to coroutine based implementation, the pipe handling code no longer exists and hence change gluster driver's licence to GPLv2+ and remove RBD copyrights. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-03-04block/gluster: Add missing argument to qemu_gluster_init() callAndreas Färber1-1/+1
Commit adccfbcd6020e928db93b2b4faf0dbd05ffbe016 (block: gluster - add reopen support.) did not supply the qemu_gluster_init() Error ** argument, needed since commit a7451cb850d115f257080aff3fbc54f255ebf8f7 (gluster: correctly propagate errors). Pass through qemu_gluster_reopen_prepare()'s errp, as done in qemu_gluster_open(). Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-28block: gluster - add reopen support.Jeff Cody1-0/+102
Gluster does parse open flags in its .bdrv_open() implementation, and the .bdrv_reopen_* implementations need to do the same. A new gluster connection to the image file to be created is established in the .bdrv_reopen_prepare(), and the image file opened with the new flags. If this is successful, then the old image file is closed, and the old connection torn down. The relevant structure pointers in the gluster state structure are updated to the new connection. If it is not successful, then the new file handle and connection is abandoned (if it exists), while the old connection is not modified at all. With reopen supported, block-commit (and offline commit) is now also supported for image files whose base image uses the native gluster protocol driver. Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-28block: gluster - code movements, state storage changesJeff Cody1-15/+26
In preparation for supporting reopen on gluster, move flag parsing out to a function. Also, add a NULL check in the gconf cleanup. Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-21gluster: correctly propagate errorsPaolo Bonzini1-11/+13
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-02-21gluster: default scheme to gluster:// and host to localhost.Paolo Bonzini1-2/+2
Currently, "gluster:///volname/img" and (using file. options) "file.driver=gluster,file.filename=foo" will segfault. Also, "//host/volname/img" will be rejected, but it is a valid URL that should be accepted just fine with "file.driver=gluster". Accept all of these, by inferring missing transport and host as TCP and localhost respectively. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-02-17Use error_is_set() only when necessaryMarkus Armbruster1-1/+1
error_is_set(&var) is the same as var != NULL, but it takes whole-program analysis to figure that out. Unnecessarily hard for optimizers, static checkers, and human readers. Dumb it down to obvious. Gets rid of several dozen Coverity false positives. Note that the obvious form is already used in many places. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-01-22gluster: Add support for creating zero-filled imageBharata B Rao1-1/+49
GlusterFS supports creation of zero-filled file on GlusterFS volume by means of an API called glfs_zerofill(). Use this API from QEMU to create an image that is filled with zeroes by using the preallocation option of qemu-img. qemu-img create gluster://server/volume/image -o preallocation=full 10G The allowed values for preallocation are 'full' and 'off'. By default preallocation is off and image is not zero-filled. glfs_zerofill() offloads the writing of zeroes to the server and if the storage supports SCSI WRITESAME, GlusterFS server can issue BLKZEROOUT ioctl to achieve the zeroing. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22gluster: Implement .bdrv_co_write_zeroes for glusterBharata B Rao1-19/+60
Support .bdrv_co_write_zeroes() from gluster driver by using GlusterFS API glfs_zerofill() that off-loads the writing of zeroes to GlusterFS server. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22gluster: Convert aio routines into coroutinesBharata B Rao1-147/+74
Convert the read, write, flush and discard implementations from aio-based ones to coroutine based ones. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-06qemu-option: Remove qemu_opts_create_nofailPeter Crosthwaite1-1/+1
This is a boiler-plate _nofail variant of qemu_opts_create. Remove and use error_abort in call sites. null/0 arguments needs to be added for the id and fail_if_exists fields in affected callsites due to argument inconsistency between the normal and no_fail variants. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-09-25block: introduce BlockDriver.bdrv_needs_filename to enable some drivers.Benoît Canet1-0/+4
Some drivers will have driver specifics options but no filename. This new bool allow the block layer to treat them correctly. The .bdrv_needs_filename is set in drivers not having .bdrv_parse_filename and not having .bdrv_open. The first exception to this rule will be the quorum driver. Signed-off-by: Benoit Canet <benoit@irqsave.net> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-09-12bdrv: Use "Error" for creating imagesMax Reitz1-1/+1
Add an Error ** parameter to BlockDriver.bdrv_create to allow more specific error messages. Signed-off-by: Max Reitz <mreitz@redhat.com>
2013-09-12bdrv: Use "Error" for opening imagesMax Reitz1-1/+1
Add an Error ** parameter to BlockDriver.bdrv_open and BlockDriver.bdrv_file_open to allow more specific error messages. Signed-off-by: Max Reitz <mreitz@redhat.com>
2013-08-30gluster: Abort on AIO completion failureBharata B Rao1-13/+2
Currently if gluster AIO callback thread fails to notify the QEMU thread about AIO completion, we try graceful recovery by marking the disk drive as inaccessible. This error recovery code is race-prone as found by Asias and Stefan. However as found out by Paolo, this kind of error is impossible and hence simplify the code that handles this error recovery. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-19aio: drop io_flush argumentStefan Hajnoczi1-4/+3
The .io_flush() handler no longer exists and has no users. Drop the io_flush argument to aio_set_fd_handler() and related functions. The AioFlushEventNotifierHandler and AioFlushHandler typedefs are no longer used and are dropped too. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-19block/gluster: drop qemu_gluster_aio_flush_cb()Stefan Hajnoczi1-17/+1
Since .io_flush() is no longer called we do not need qemu_gluster_aio_flush_cb() anymore. It turns out that qemu_aio_count is unused now and can be dropped. Thanks to Bharata B Rao <bharata@linux.vnet.ibm.com> for catching a build failure with CONFIG_GLUSTERFS_DISCARD, which has been fixed. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-07-29gluster: Add image resize supportPaolo Bonzini1-0/+17
Implement .bdrv_truncate in GlusterFS block driver so that GlusterFS backend can support image resizing. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Tested-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-07-19gluster: Add discard support for GlusterFS block driver.Bharata B Rao1-0/+45
Implement bdrv_aio_discard for gluster. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-28gluster: Return bdrv_has_zero_init = 0Kevin Wolf1-0/+10
GlusterFS volumes can be backed by block devices, in which case bdrv_create() doesn't make sure that the image is zeroed out. It is currently not possibly to detect whether a given image is backed by a file or a block device, and incorrectly assuming that it is zeroed corrupts images during qemu-img convert, so let's err on the side of caution and always return 0. Cc: qemu-stable@nongnu.org Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-04-22block: Remove filename parameter from .bdrv_file_open()Kevin Wolf1-2/+2
It is unused now in all block drivers. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2013-04-22gluster: Use bdrv_open options instead of filenameKevin Wolf1-1/+31
This is only to convert the internal interface that is used for passing the "filename" to be parsed, but converting to actual fine grained options is left for another day, as it doesn't look trivial. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2013-03-22block: Add options QDict to bdrv_file_open() prototypesKevin Wolf1-1/+1
The new parameter is unused yet. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2013-02-11error: Strip trailing '\n' from error string arguments (again)Markus Armbruster1-1/+1
Commit 6daf194d and be62a2eb got rid of a bunch, but they keep coming back. Tracked down with this Coccinelle semantic patch: @r@ expression err, eno, cls, fmt; position p; @@ ( error_report(fmt, ...)@p | error_set(err, cls, fmt, ...)@p | error_set_errno(err, eno, cls, fmt, ...)@p | error_setg(err, fmt, ...)@p | error_setg_errno(err, eno, fmt, ...)@p ) @script:python@ fmt << r.fmt; p << r.p; @@ if "\\n" in str(fmt): print "%s:%s:%s:%s" % (p[0].file, p[0].line, p[0].column, fmt) Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-id: 1360354939-10994-4-git-send-email-armbru@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-12-19misc: move include files to include/qemu/Paolo Bonzini1-2/+2
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19block: move include files to include/block/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-11-14aio: rename AIOPool to AIOCBInfoStefan Hajnoczi1-3/+3
Now that AIOPool no longer keeps a freelist, it isn't really a "pool" anymore. Rename it to AIOCBInfo and make it const since it no longer needs to be modified. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-28block: Support GlusterFS as a QEMU block backend.Bharata B Rao1-0/+624
This patch adds gluster as the new block backend in QEMU. This gives QEMU the ability to boot VM images from gluster volumes. Its already possible to boot from VM images on gluster volumes using FUSE mount, but this patchset provides the ability to boot VM images from gluster volumes by by-passing the FUSE layer in gluster. This is made possible by using libgfapi routines to perform IO on gluster volumes directly. VM Image on gluster volume is specified like this: file=gluster[+transport]://[server[:port]]/volname/image[?socket=...] 'gluster' is the protocol. 'transport' specifies the transport type used to connect to gluster management daemon (glusterd). Valid transport types are tcp, unix and rdma. If a transport type isn't specified, then tcp type is assumed. 'server' specifies the server where the volume file specification for the given volume resides. This can be either hostname, ipv4 address or ipv6 address. ipv6 address needs to be within square brackets [ ]. If transport type is 'unix', then 'server' field should not be specifed. The 'socket' field needs to be populated with the path to unix domain socket. 'port' is the port number on which glusterd is listening. This is optional and if not specified, QEMU will send 0 which will make gluster to use the default port. If the transport type is unix, then 'port' should not be specified. 'volname' is the name of the gluster volume which contains the VM image. 'image' is the path to the actual VM image that resides on gluster volume. Examples: file=gluster://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4/testvol/a.img file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket file=gluster+rdma://1.2.3.4:24007/testvol/a.img Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.2.1 (git 2.18.0) at 2024-05-12 18:16:03 +0000