summaryrefslogtreecommitdiff
path: root/block/nbd.c
AgeCommit message (Collapse)AuthorFilesLines
2012-12-19misc: move include files to include/qemu/Paolo Bonzini1-3/+3
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19block: move include files to include/block/Paolo Bonzini1-2/+2
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-11-12nbd: accept URIsPaolo Bonzini1-1/+97
The URI syntax is consistent with the Gluster syntax. Export names are specified in the path, preceded by one or more (otherwise unused) slashes. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-11-12nbd: accept relative path to Unix socketPaolo Bonzini1-10/+7
Adding the "is_unix" member now will simplify the parsing of NBD URIs. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-06-11cleanup qemu_co_sendv(), qemu_co_recvv() and friendsMichael Tokarev1-8/+10
The same as for non-coroutine versions in previous patches: rename arguments to be more obvious, change type of arguments from int to size_t where appropriate, and use common code for send and receive paths (with one extra argument) since these are exactly the same. Use common iov_send_recv() directly. qemu_co_sendv(), qemu_co_recvv(), and qemu_co_recv() are now trivial #define's merely adding one extra arg. qemu_co_sendv() and qemu_co_recvv() callers are converted to different argument order and extra `iov_cnt' argument. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2012-04-26nbd: Fix uninitialised use of s->sockKevin Wolf1-1/+1
s->sock is assigned only afterwards, so we're really registering an aio_fd_handler for file descriptor 0 here. Not exactly what we intended. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-04-23Merge remote-tracking branch 'kwolf/for-anthony' into stagingAnthony Liguori1-4/+4
* kwolf/for-anthony: (38 commits) qemu-iotests: Fix test 031 for qcow2 v3 support qemu-iotests: Add -o and make v3 the default for qcow2 qcow2: Zero write support qemu-iotests: Test backing file COW with zero clusters qemu-iotests: add a simple test for write_zeroes qcow2: Support for feature table header extension qcow2: Support reading zero clusters qcow2: Version 3 images qcow2: Ignore reserved bits in check_refcounts qcow2: Ignore reserved bits in refcount table entries qcow2: Simplify count_cow_clusters qcow2: Refactor qcow2_free_any_clusters qcow2: Ignore reserved bits in L1/L2 entries qcow2: Fail write_compressed when overwriting data qcow2: Ignore reserved bits in count_contiguous_clusters() qcow2: Ignore reserved bits in get_cluster_offset qcow2: Save disk size in snapshot header Specification for qcow2 version 3 qcow2: Fix refcount block allocation during qcow2_alloc_cluster_at() iotests: Resolve test failures caused by hostname ...
2012-04-19aio: remove process_queue callback and qemu_aio_process_queuePaolo Bonzini1-4/+4
Both unused after the previous patch. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-04-19nbd: do not block in nbd_wr_sync if no data at all is availablePaolo Bonzini1-2/+10
Right now, nbd_wr_sync will hang if no data at all is available on the socket and the other side is not going to provide any. Relax this by making it loop only for writes or partial reads. This fixes a race where one thread is executing qemu_aio_wait() and another is executing main_loop_wait(). Then, the select() call in main_loop_wait() can return stale data and call the "readable" callback with no data in the socket. Reported-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-04-19nbd: consistently return negative errno valuesPaolo Bonzini1-7/+6
In the next patch we need to look at the return code of nbd_wr_sync. To avoid percolating the socket_error() ugliness all around, let's handle errors by returning negative errno values. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-04-19nbd: consistently check for <0 or >=0Paolo Bonzini1-7/+15
This prepares for the following patch, which changes -1 return values to negative errno. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-04-19nbd: avoid out of bounds access to recv_coroutine arrayPaolo Bonzini1-1/+5
This can happen with a buggy or malicious server. Reported-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2011-12-22nbd: add support for NBD_CMD_TRIMPaolo Bonzini1-0/+25
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2011-12-22nbd: add support for NBD_CMD_FLUSHPaolo Bonzini1-8/+37
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2011-12-22nbd: add support for NBD_CMD_FLAG_FUAPaolo Bonzini1-0/+4
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2011-12-22nbd: allow multiple in-flight requestsPaolo Bonzini1-13/+56
Allow sending up to 16 requests, and drive the replies to the coroutine that did the request. The code is written to be exactly the same as before this patch when MAX_NBD_REQUESTS == 1 (modulo the extra mutex and state). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2011-12-22nbd: split requestsPaolo Bonzini1-6/+46
qemu-nbd has a limit of slightly less than 1M per request. Work around this in the nbd block driver. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2011-12-22nbd: switch to asynchronous operationPaolo Bonzini1-65/+123
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2011-12-06fix typo: delete redundant semicolonDong Xu Wang1-2/+2
Double semicolons should be single. Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-10-21block: take lock around bdrv_write implementationsPaolo Bonzini1-1/+12
This does the first part of the conversion to coroutines, by wrapping bdrv_write implementations to take the mutex. Drivers that implement bdrv_write rather than bdrv_co_writev can then benefit from asynchronous operation (at least if the underlying protocol supports it, which is not the case for raw-win32), even though they still operate with a bounce buffer. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-21block: take lock around bdrv_read implementationsPaolo Bonzini1-1/+12
This does the first part of the conversion to coroutines, by wrapping bdrv_read implementations to take the mutex. Drivers that implement bdrv_read rather than bdrv_co_readv can then benefit from asynchronous operation (at least if the underlying protocol supports it, which is not the case for raw-win32), even though they still operate with a bounce buffer. raw-win32 does not need the lock, because it cannot yield. nbd also doesn't probably, but better be safe. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-21block: add a CoMutex to synchronous read driversPaolo Bonzini1-0/+2
The big conversion of bdrv_read/write to coroutines caused the two homonymous callbacks in BlockDriver to become reentrant. It goes like this: 1) bdrv_read is now called in a coroutine, and calls bdrv_read or bdrv_pread. 2) the nested bdrv_read goes through the fast path in bdrv_rw_co_entry; 3) in the common case when the protocol is file, bdrv_co_do_readv calls bdrv_co_readv_em (and from here goes to bdrv_co_io_em), which yields until the AIO operation is complete; 4) if bdrv_read had been called from a bottom half, the main loop is free to iterate again: a device model or another bottom half can then come and call bdrv_read again. This applies to all four of read/write/flush/discard. It would also apply to is_allocated, but it is not used from within coroutines: besides qemu-img.c and qemu-io.c, which operate synchronously, the only user is the monitor. Copy-on-read will introduce a use in the block layer, and will require converting it. The solution is "simply" to convert all drivers to coroutines! We just need to add a CoMutex that is taken around affected operations. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-19nbd: support feature negotiationPaolo Bonzini1-2/+2
nbd supports writing flags in bytes 24...27 of the header, and uses that for the read-only flag. Add support for it in qemu-nbd. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12nbd: Clean up use of block_int.hMarkus Armbruster1-0/+1
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-08-20Use glib memory allocation and free functionsAnthony Liguori1-9/+9
qemu_malloc/qemu_free no longer exist after this commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-05-03NBD: Avoid leaking a couple of strings when the NBD device is closedNick Thomas1-0/+4
Signed-off-by: Nick Thomas <nick@bytemark.co.uk> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-04-07NBD device: Separate out parsing configuration and opening sockets.Nick Thomas1-55/+102
We also change the way the file parameter is parsed so IPv6 IP addresses can be used, e.g.: "drive=nbd:[::1]:5000" Signed-off-by: Nick Thomas <nick@bytemark.co.uk> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-09-21nbd: correctly manage default portLaurent Vivier1-2/+0
block/nbd.c: use default port number when none is specified qemu-nbd.c: use IANA-assigned port number: 10809 Signed-off-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-08-30nbd: Introduce NBD named exports.Laurent Vivier1-19/+49
This patch allows to connect Qemu using NBD protocol to an nbd-server using named exports. For instance, if on the host "isoserver", in /etc/nbd-server/config, you have: [generic] [debian-500-ppc-netinst] exportname = /ISO/debian-500-powerpc-netinst.iso [Fedora-10-ppc-netinst] exportname = /ISO/Fedora-10-ppc-netinst.iso You can connect to it, using: qemu -cdrom nbd:isoserver:exportname=debian-500-ppc-netinst qemu -cdrom nbd:isoserver:exportname=Fedora-10-ppc-netinst NOTE: you need at least nbd-server 2.9.18 Signed-off-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-05-03block: Open the underlying image file in generic codeKevin Wolf1-1/+1
Format drivers shouldn't need to bother with things like file names, but rather just get an open BlockDriverState for the underlying protocol. This patch introduces this behaviour for bdrv_open implementation. For protocols which need to access the filename to open their file/device/connection/... a new callback bdrv_file_open is introduced which doesn't get an underlying file opened. For now, also some of the more obscure formats use bdrv_file_open because they open() the file themselves instead of using the block.c functions. They need to be fixed in later patches. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-01-26block: kill BDRV_O_CREATChristoph Hellwig1-3/+0
The BDRV_O_CREAT option is unused inside qemu and partially duplicates the bdrv_create method. Remove it, and the -C option to qemu-io which isn't used in qemu-iotests anyway. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-14Move block drivers into their own directoryAnthony Liguori1-0/+196
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.2.1 (git 2.18.0) at 2024-07-02 08:32:11 +0000