| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Image formats with a dirty bit, like qed and qcow2, repair dirty image
files upon open with BDRV_O_RDWR. Performing automatic repair when
qemu-img check runs is not ideal because the bdrv_open() call repairs
the image before the actual bdrv_check() call from qemu-img.c.
Fix this "double repair" since it leads to confusing output from
qemu-img check. Tell the block driver that this image is being opened
just for bdrv_check(). This skips automatic repair and qemu-img.c can
invoke it manually with bdrv_check().
Update the golden output for qemu-iotests 039 to reflect the new
qemu-img check output.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The dirty bit is cleared after image repair succeeds in qcow2_open().
Move this into qcow2_check() so that all callers benefit from this
behavior when fix mode is enabled.
This is necessary so qemu-img check can call .bdrv_check() and mark the
image clean.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Lazy refcounts is a performance optimization for qcow2 that postpones
refcount metadata updates and instead marks the image dirty. In the
case of crash or power failure the image will be left in a dirty state
and repaired next time it is opened.
Reducing metadata I/O is important for cache=writethrough and
cache=directsync because these modes guarantee that data is on disk
after each write (hence we cannot take advantage of caching updates in
RAM). Refcount metadata is not needed for guest->file block address
translation and therefore does not need to be on-disk at the time of
write completion - this is the motivation behind the lazy refcount
optimization.
The lazy refcount optimization must be enabled at image creation time:
qemu-img create -f qcow2 -o compat=1.1,lazy_refcounts=on a.qcow2 10G
qemu-system-x86_64 -drive if=virtio,file=a.qcow2,cache=writethrough
Update qemu-iotests 031 and 036 since the extension header size changes
when we add feature bit table entries.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This patch adds an incompatible feature bit to mark images that have not
been closed cleanly. When a dirty image file is opened a consistency
check and repair is performed.
Update qemu-iotests 031 and 036 since the extension header size changes
when we add feature bit table entries.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
* mjt/mjt-iov2:
rewrite iov_send_recv() and move it to iov.c
cleanup qemu_co_sendv(), qemu_co_recvv() and friends
export iov_send_recv() and use it in iov_send() and iov_recv()
rename qemu_sendv to iov_send, change proto and move declarations to iov.h
change qemu_iovec_to_buf() to match other to,from_buf functions
consolidate qemu_iovec_copy() and qemu_iovec_concat() and make them consistent
allow qemu_iovec_from_buffer() to specify offset from which to start copying
consolidate qemu_iovec_memset{,_skip}() into single function and use existing iov_memset()
rewrite iov_* functions
change iov_* function prototypes to be more appropriate
virtio-serial-bus: use correct lengths in control_out() message
Conflicts:
tests/Makefile
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
The DEBUG_ALLOC qcow2.h macro enables additional consistency checks
throughout the code. This makes it easier to spot corruptions that are
introduced during development. Since consistency check is an expensive
operation the DEBUG_ALLOC macro is used to compile checks out in normal
builds and qcow2_check_refcounts() calls missed the addition of a new
function argument.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The autoclear feature bits can be used for qcow2 file format features
that are safe to "drop" by old programs that do not understand the
feature. Upon opening the image file unknown autoclear feature bits are
cleared and the image file header is rewritten, but this was happening
too early in the code when critical header fields were not yet loaded.
Process autoclear feature bits after all necessary header information
has been loaded.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Writethrough does not need special-casing anymore in the qcow2 caches.
The block layer adds flushes after every guest-initiated data write,
and these will also flush the qcow2 caches to the OS.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The QED block driver already provides the functionality to not only
detect inconsistencies in images, but also fix them. However, this
functionality cannot be manually invoked with qemu-img, but the
check happens only automatically during bdrv_open().
This adds a -r switch to qemu-img check that allows manual invocation
of an image repair.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
It now allows specifying offset within qiov to start from and
amount of bytes to copy. Actual implementation is just a call
to iov_to_buf().
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
qemu_iovec_concat() is currently a wrapper for
qemu_iovec_copy(), use the former (with extra
"0" arg) in a few places where it is used.
Change skip argument of qemu_iovec_copy() from
uint64_t to size_t, since size of qiov itself
is size_t, so there's no way to skip larger
sizes. Rename it to soffset, to make it clear
that the offset is applied to src.
Also change the only usage of uint64_t in
hw/9pfs/virtio-9p.c, in v9fs_init_qiov_from_pdu() -
all callers of it actually uses size_t too,
not uint64_t.
One added restriction: as for all other iovec-related
functions, soffset must point inside src.
Order of argumens is already good:
qemu_iovec_memset(QEMUIOVector *qiov, size_t offset,
int c, size_t bytes)
vs:
qemu_iovec_concat(QEMUIOVector *dst,
QEMUIOVector *src,
size_t soffset, size_t sbytes)
(note soffset is after _src_ not dst, since it applies to src;
for memset it applies to qiov).
Note that in many places where this function is used,
the previous call is qemu_iovec_reset(), which means
many callers actually want copy (replacing dst content),
not concat. So we may want to add a wrapper like
qemu_iovec_copy() with the same arguments but which
calls qemu_iovec_reset() before _concat().
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
Similar to
qemu_iovec_memset(QEMUIOVector *qiov, size_t offset,
int c, size_t bytes);
the new prototype is:
qemu_iovec_from_buf(QEMUIOVector *qiov, size_t offset,
const void *buf, size_t bytes);
The processing starts at offset bytes within qiov.
This way, we may copy a bounce buffer directly to
a middle of qiov.
This is exactly the same function as iov_from_buf() from
iov.c, so use the existing implementation and rename it
to qemu_iovec_from_buf() to be shorter and to match the
utility function.
As with utility implementation, we now assert that the
offset is inside actual iovec. Nothing changed for
current callers, because `offset' parameter is new.
While at it, stop using "bounce-qiov" in block/qcow2.c
and copy decrypted data directly from cluster_data
instead of recreating a temp qiov for doing that.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
existing iov_memset()
This patch combines two functions into one, and replaces
the implementation with already existing iov_memset() from
iov.c.
The new prototype of qemu_iovec_memset():
size_t qemu_iovec_memset(qiov, size_t offset, int fillc, size_t bytes)
It is different from former qemu_iovec_memset_skip(), and
I want to make other functions to be consistent with it
too: first how much to skip, second what, and 3rd how many
of it. It also returns actual number of bytes filled in,
which may be less than the requested `bytes' if qiov is
smaller than offset+bytes, in the same way iov_memset()
does.
While at it, use utility function iov_memset() from
iov.h in posix-aio-compat.c, where qiov was used.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This check applies to all drivers, but QED lacks it.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
preallocate() will be locked. This is required because
qcow2_alloc_cluster_link_l2() assumes that it runs under a lock that it
can drop while COW is being performed.
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Instead of printing an ugly bitmask, qemu can now print a more helpful
string even for yet unknown features.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This adds support for reading zero clusters in version 3 images.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This adds the basic infrastructure to qcow2 to handle version 3 images.
It includes code to create v3 images, allow header updates for v3 images
and checks feature bits.
It still misses support for zero clusters, so this is not a fully
compliant implementation of v3 yet.
The default for creating new images stays at v2 for now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
With this change, reading from a qcow2 image ignores all reserved bits
that are set in an L1 or L2 table entry.
Now get_cluster_offset() assigns *cluster_offset only the offset without
any other flags. The cluster type is not longer encoded in the offset,
but a positive return value in case of success.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
qemu-img resize has some limitations with qcow2, but the user is only
told that "this image format does not support resize". Quite confusing,
so add some more detailed error_report() calls and change "this image
format" into "this image".
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
|
|
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
|
|
Image files that make qemu-img info read several gigabytes into the
unknown header extensions list are bad. Just fail opening the image
if an extension claims to be larger than the header extension area.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
|
|
The spec says that the length of extensions is padded to 8 bytes, not
the offset. Currently this is the same because the header size is a
multiple of 8, so this is only about compatibility with future changes
to the header size.
While touching it, move the calculation to a common place instead of
duplicating it for each header extension type.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
|
|
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
If we want header extensions to work as compatible extensions, we can't
destroy yet unknown header extensions when rewriting the header (e.g.
for changing the backing file). Save all unknown header extensions in a
list of blobs and include them in a new header.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
In order to switch the backing file, qcow2 issues multiple write
requests that only changed a part of the image header. Any failure after
the first one would leave the header in an corrupted state. With this
patch, the whole header is written at once, so we can't fail in the
middle.
At the same time, this gives us a reusable functions that updates all
fields of the qcow2 header and not only the backing file.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Li Zhi Hui <zhihuili@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
|
|
It's common to wake up all waiting coroutines. Introduce the
qemu_co_queue_restart_all() function to do this instead of looping over
qemu_co_queue_next() in every caller.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The qcow2, qcow, and vmdk block drivers are based on coroutines. They have a
coroutine mutex which protects internal state. We can convert the
.bdrv_is_allocated() function to .bdrv_co_is_allocated() by holding the mutex
around the cluster lookup operation.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
|
|
Looks better when reviewing these source files.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
|
|
We don't reopen the actual file, but instead invoke the close and open routines.
We specifically ignore the backing file since it's contents are read-only and
therefore immutable.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
qcow2 has a writeback metadata cache, so flushing a qcow2 image actually
consists of writing back that cache to the protocol and only then flushes the
protocol in order to get everything stable on disk.
This introduces a separate bdrv_co_flush_to_os to reflect the split.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
There are two different types of flush that you can do: Flushing one level up
to the OS (i.e. writing data to the host page cache) or flushing it all the way
down to the disk. The existing functions flush to the disk, reflect this in the
function name.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
If qcow2_cache_flush failed, s->lock will not be unlock.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Since coroutine operation is now mandatory, convert both bdrv_discard
implementations to coroutines. For qcow2, this means taking the lock
around the operation. raw-posix remains synchronous.
The bdrv_discard callback is then unused and can be eliminated.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Since coroutine operation is now mandatory, convert all bdrv_flush
implementations to coroutines. For qcow2, this means taking the lock.
Other implementations are simpler and just forward bdrv_flush to the
underlying protocol, so they can avoid the lock.
The bdrv_flush callback is then unused and can be eliminated.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
If during allocation of compressed clusters the cluster was already allocated
uncompressed, fail and properly release the l2_table (the latter avoids a
failed assertion).
While at it, make it return some real error numbers instead of -1.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
|
|
Block drivers now only need to provide either of .bdrv_co_flush,
.bdrv_aio_flush() or for legacy drivers .bdrv_flush(). Remove
the redundant .bdrv_flush() implementations.
[Paolo Bonzini: change raw driver to bdrv_co_flush]
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Frediano Ziglio <freddy77@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Requests depending on a failed request would end up waiting forever. This fixes
the error path to continue dependent requests even when the request has failed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Dependency list pointers filled with random garbage from the stack aren't a
good idea.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
