summaryrefslogtreecommitdiff
path: root/block/qed.c
AgeCommit message (Collapse)AuthorFilesLines
2014-10-20block: Rename BlockDriverCompletionFunc to BlockCompletionFuncMarkus Armbruster1-9/+9
I'll use it with block backends shortly, and the name is going to fit badly there. It's a block layer thing anyway, not just a block driver thing. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20block: Rename BlockDriverAIOCB* to BlockAIOCB*Markus Armbruster1-16/+16
I'll use BlockDriverAIOCB with block backends shortly, and the name is going to fit badly there. It's a block layer thing anyway, not just a block driver thing. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20block: Eliminate BlockDriverState member device_name[]Markus Armbruster1-1/+1
device_name[] can become non-empty only in bdrv_new_root() and bdrv_move_feature_fields(). The latter is used only to undo damage done by bdrv_swap(). The former is called only by blk_new_with_bs(). Therefore, when a BlockDriverState's device_name[] is non-empty, then it's been created with a BlockBackend, and vice versa. Furthermore, blk_new_with_bs() keeps the two names equal. Therefore, device_name[] is redundant. Eliminate it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-09-22block: Rename qemu_aio_release -> qemu_aio_unrefFam Zheng1-1/+1
Suggested-by: Benoît Canet <benoit.canet@irqsave.net> Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-22qed: Drop qed_aiocb_info.cancelFam Zheng1-21/+0
Also drop the now unused ->finished field. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-12block: round up file size to nearest sectorHu Tao1-1/+2
Currently the file size requested by user is rounded down to nearest sector, causing the actual file size could be a bit less than the size user requested. Since some formats (like qcow2) record virtual disk size in bytes, this can make the last few bytes cannot be accessed. This patch fixes it by rounding up file size to nearest sector so that the actual file size is no less than the requested file size. Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-08-15qed: Handle failure for potentially large allocationsKevin Wolf1-1/+5
Some code in the block layer makes potentially huge allocations. Failure is not completely unexpected there, so avoid aborting qemu and handle out-of-memory situations gracefully. This patch addresses the allocations in the qed block driver. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net>
2014-07-18block: Add Error argument to bdrv_refresh_limits()Kevin Wolf1-3/+1
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-07-14qed: Make qiov match request size until backing file EOFKevin Wolf1-8/+30
If a QED image has a shorter backing file and a read request to unallocated clusters goes across EOF of the backing file, the backing file sees a shortened request and the rest is filled with zeros. However, the original too long qiov was used with the shortened request. This patch makes the qiov size match the request size, avoiding a potential buffer overflow in raw-posix. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-07-01qemu-img create: add 'nocow' optionChunyan Liu1-3/+3
Add 'nocow' option so that users could have a chance to set NOCOW flag to newly created files. It's useful on btrfs file system to enhance performance. Btrfs has low performance when hosting VM images, even more when the guest in those VM are also using btrfs as file system. One way to mitigate this bad performance is to turn off COW attributes on VM files. Generally, there are two ways to turn off NOCOW on btrfs: a) by mounting fs with nodatacow, then all newly created files will be NOCOW. b) per file. Add the NOCOW file attribute. It could only be done to empty or new files. This patch tries the second way, according to the option, it could add NOCOW per file. For most block drivers, since the create file step is in raw-posix.c, so we can do setting NOCOW flag ioctl in raw-posix.c only. But there are some exceptions, like block/vpc.c and block/vdi.c, they are creating file by calling qemu_open directly. For them, do the same setting NOCOW flag ioctl work in them separately. [Fixed up 082.out due to the new 'nocow' creation option --Stefan] Signed-off-by: Chunyan Liu <cyliu@suse.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-26block: Catch backing files assigned to non-COW driversKevin Wolf1-0/+1
Since we parse backing.* options to add a backing file from the command line when the driver didn't assign one, it has been possible to have a backing file for e.g. raw images (it just was never accessed). This is obvious nonsense and should be rejected. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-06-16cleanup QEMUOptionParameterChunyan Liu1-2/+2
Now that all backend drivers are using QemuOpts, remove all QEMUOptionParameter related codes. Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com> Signed-off-by: Chunyan Liu <cyliu@suse.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-16qed.c: replace QEMUOptionParameter with QemuOptsChunyan Liu1-54/+60
One extra change is to define QED_DEFAULT_CLUSTER_SIZE = 65536 instead of 64 * 1024; because: according to existing create_options, "cluster size" has default value = QED_DEFAULT_CLUSTER_SIZE, after switching to create_opts, this has to be stringized and set to .def_value_str. That is, .def_value_str = stringify(QED_DEFAULT_CLUSTER_SIZE), so the QED_DEFAULT_CLUSTER_SIZE could not be a expression. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com> Signed-off-by: Chunyan Liu <cyliu@suse.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-16change block layer to support both QemuOpts and QEMUOptionParamterChunyan Liu1-1/+1
Change block layer to support both QemuOpts and QEMUOptionParameter. After this patch, it will change backend drivers one by one. At the end, QEMUOptionParameter will be removed and only QemuOpts is kept. Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com> Signed-off-by: Chunyan Liu <cyliu@suse.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-04qed: use BlockDriverState's AioContextStefan Hajnoczi1-6/+29
Drop the assumption that we're using the main AioContext. Convert qemu_bh_new() to aio_bh_new() and qemu_aio_wait() to aio_poll() so we're using the BlockDriverState's AioContext. Implement .bdrv_detach/attach_aio_context() interfaces to move the QED_F_NEED_CHECK timer from the old AioContext to the new one. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-22convert fprintf() calls to error_setg() in block/qed.c:bdrv_qed_create()Aakriti Gupta1-7/+9
This patch converts fprintf() calls to error_setg() in block/qed.c:bdrv_qed_create() (error_setg() is part of error reporting API in include/qapi/error.h) Signed-off-by: Aakriti Gupta <aakritty@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-03-19block: Add error handling to bdrv_invalidate_cache()Kevin Wolf1-3/+18
If it returns an error, the migrated VM will not be started, but qemu exits with an error message. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net>
2014-03-13block: Update image size in bdrv_invalidate_cache()Kevin Wolf1-0/+3
After migration has completed, we call bdrv_invalidate_cache() so that drivers which cache some data drop their stale copy of the data and reread it from the image file to get a new version of data that the source modified while the migration was running. Reloading metadata from the image file is useless, though, if the size of the image file stays stale (this is a value that is cached for all image formats in block.c). Reads from (meta)data after the old EOF return only zeroes, causing image corruption. We need to update bs->total_sectors in all layers that could potentially have changed their size (i.e. backing files are not a concern - if they are changed, we're in bigger trouble) Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-21block: do not abuse EMEDIUMTYPEPaolo Bonzini1-1/+2
Returning "Wrong medium type" for an image that does not have a valid header is a bit weird. Improve the error by mentioning what format was trying to open it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-02-21qed: correctly propagate errorsPaolo Bonzini1-7/+6
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-02-21block: Make bdrv_file_open() staticMax Reitz1-3/+5
Add the bdrv_open() option BDRV_O_PROTOCOL which results in passing the call to bdrv_file_open(). Additionally, make bdrv_file_open() static and therefore bdrv_open() the only way to call it. Consequently, all existing calls to bdrv_file_open() have to be adjusted to use bdrv_open() with the BDRV_O_PROTOCOL flag instead. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-31block: remove QED .bdrv_make_empty implementationJeff Cody1-6/+0
The QED .bdrv_make_empty() implementation does nothing but return -ENOTSUP, which causes problems in bdrv_commit(). Since the function stub exists for QED, it is called, which then always returns an error. The proper way to not support an optional driver function stub is to just not implement it, so let's remove the stub. Signed-off-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-01-24block: Move initialisation of BlockLimits to bdrv_refresh_limits()Kevin Wolf1-1/+10
This function separates filling the BlockLimits from bdrv_open(), which allows it to call it from other operations which may change the limits (e.g. modifications to the backing file chain or bdrv_reopen) Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net>
2014-01-22block: Allow reference for bdrv_file_open()Max Reitz1-2/+2
Allow specifying a reference to an existing block device (by name) for bdrv_file_open() instead of a filename and/or options. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-12-03block drivers: expose requirement for write same alignment from formatsPaolo Bonzini1-0/+1
This will let misaligned but large requests use zero clusters. This is important because the cluster size is not guest visible. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Peter Lieven <pl@kamp.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-03block drivers: add discard/write_zeroes properties to bdrv_get_info ↵Paolo Bonzini1-0/+2
implementation Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Peter Lieven <pl@kamp.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-11-28block: add flags to bdrv_*_write_zeroesPeter Lieven1-1/+2
Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-12block: Error parameter for create functionsMax Reitz1-1/+3
Add an Error ** parameter to bdrv_create and its associated functions to allow more specific error messages. Signed-off-by: Max Reitz <mreitz@redhat.com>
2013-09-12block: Error parameter for open functionsMax Reitz1-1/+5
Add an Error ** parameter to bdrv_open, bdrv_file_open and associated functions to allow more specific error messages. Signed-off-by: Max Reitz <mreitz@redhat.com>
2013-09-12bdrv: Use "Error" for creating imagesMax Reitz1-1/+2
Add an Error ** parameter to BlockDriver.bdrv_create to allow more specific error messages. Signed-off-by: Max Reitz <mreitz@redhat.com>
2013-09-12bdrv: Use "Error" for opening imagesMax Reitz1-2/+3
Add an Error ** parameter to BlockDriver.bdrv_open and BlockDriver.bdrv_file_open to allow more specific error messages. Signed-off-by: Max Reitz <mreitz@redhat.com>
2013-09-06block: return get_block_status data and flags for formatsPaolo Bonzini1-7/+28
Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06block: introduce bdrv_get_block_status APIPaolo Bonzini1-2/+2
For now, bdrv_get_block_status is just another name for bdrv_is_allocated. The next patches will add more flags. This also touches all block drivers with a mostly mechanical rename. The sole exception is cow; because it calls cow_co_is_allocated from the read code, we keep that function and make cow_co_get_block_status a wrapper. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06block: make bdrv_delete() staticFam Zheng1-1/+1
Manage BlockDriverState lifecycle with refcnt, so bdrv_delete() is no longer public and should be called by bdrv_unref() if refcnt is decreased to 0. This is an identical change because effectively, there's no multiple reference of BDS now: no caller of bdrv_ref() yet, only bdrv_new() sets bs->refcnt to 1, so all bdrv_unref() now actually delete the BDS. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22aio / timers: Switch entire codebase to the new timer APIAlex Bligh1-5/+5
This is an autogenerated patch using scripts/switch-timer-api. Switch the entire code base to using the new timer API. Note this patch may introduce some line length issues. Signed-off-by: Alex Bligh <alex@alex.org.uk> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-28block: change default of .has_zero_init to 0Peter Lieven1-0/+1
.has_zero_init defaults to 1 for all formats and protocols. this is a dangerous default since this means that all new added drivers need to manually overwrite it to 0 if they do not ensure that a device is zero initialized after bdrv_create(). if a driver needs to explicitly set this value to 1 its easier to verify the correctness in the review process. during review of the existing drivers it turned out that ssh and gluster had a wrong default of 1. both protocols support host_devices as backend which are not by default zero initialized. this wrong assumption will lead to possible corruption if qemu-img convert is used to write to such a backend. vpc and vmdk also defaulted to 1 altough they support fixed respectively flat extends. this has to be addresses in separate patches. both formats as well as the mentioned ssh and gluster are turned to the default of 0 with this patch for safety. a similar problem with the wrong default existed for iscsi most likely because the driver developer did oversee the default value of 1. Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-03-22block: Add options QDict to bdrv_file_open() prototypesKevin Wolf1-1/+1
The new parameter is unused yet. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2013-03-15block: Add options QDict to .bdrv_open()Kevin Wolf1-2/+2
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-25block: Use error code EMEDIUMTYPE for wrong format in some block driversStefan Weil1-1/+1
This improves error reports for bochs, cow, qcow, qcow2, qed and vmdk when a file with the wrong format is selected. Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-12-19misc: move include files to include/qemu/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19migration: move include files to include/migration/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19qapi: move include files to include/qobject/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-11-14aio: rename AIOPool to AIOCBInfoStefan Hajnoczi1-2/+2
Now that AIOPool no longer keeps a freelist, it isn't really a "pool" anymore. Rename it to AIOCBInfo and make it const since it no longer needs to be modified. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-24block: qed image file reopenJeff Cody1-0/+9
These are the stubs for the file reopen drivers for the qed format. There is currently nothing that needs to be done by the qed driver in reopen. Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-08-29qed: refuse unaligned zero writes with a backing fileStefan Hajnoczi1-0/+11
Zero writes have cluster granularity in QED. Therefore they can only be used to zero entire clusters. If the zero write request leaves sectors untouched, zeroing the entire cluster would obscure the backing file. Instead return -ENOTSUP, which is handled by block.c:bdrv_co_do_write_zeroes() and falls back to a regular write. The qemu-iotests 034 test cases covers this scenario. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-08-10block: add BLOCK_O_CHECK for qemu-img checkStefan Hajnoczi1-1/+1
Image formats with a dirty bit, like qed and qcow2, repair dirty image files upon open with BDRV_O_RDWR. Performing automatic repair when qemu-img check runs is not ideal because the bdrv_open() call repairs the image before the actual bdrv_check() call from qemu-img.c. Fix this "double repair" since it leads to confusing output from qemu-img check. Tell the block driver that this image is being opened just for bdrv_check(). This skips automatic repair and qemu-img.c can invoke it manually with bdrv_check(). Update the golden output for qemu-iotests 039 to reflect the new qemu-img check output. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-08-10qed: mark image clean after repair succeedsStefan Hajnoczi1-8/+1
The dirty bit is cleared after image repair succeeds in qed_open(). Move this into qed_check() so that all callers benefit from this behavior when fix=true. This is necessary so qemu-img check can call .bdrv_check() and mark the image clean. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-09Merge remote-tracking branch 'mjt/mjt-iov2' into stagingAnthony Liguori1-5/+5
* mjt/mjt-iov2: rewrite iov_send_recv() and move it to iov.c cleanup qemu_co_sendv(), qemu_co_recvv() and friends export iov_send_recv() and use it in iov_send() and iov_recv() rename qemu_sendv to iov_send, change proto and move declarations to iov.h change qemu_iovec_to_buf() to match other to,from_buf functions consolidate qemu_iovec_copy() and qemu_iovec_concat() and make them consistent allow qemu_iovec_from_buffer() to specify offset from which to start copying consolidate qemu_iovec_memset{,_skip}() into single function and use existing iov_memset() rewrite iov_* functions change iov_* function prototypes to be more appropriate virtio-serial-bus: use correct lengths in control_out() message Conflicts: tests/Makefile Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-07-09blkdebug: remove sync i/o eventsPaolo Bonzini1-1/+1
These are unused, except (by mistake more or less) in QED. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-06-15qemu-img check -r for repairing imagesKevin Wolf1-2/+3
The QED block driver already provides the functionality to not only detect inconsistencies in images, but also fix them. However, this functionality cannot be manually invoked with qemu-img, but the check happens only automatically during bdrv_open(). This adds a -r switch to qemu-img check that allows manual invocation of an image repair. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.2.1 (git 2.18.0) at 2024-06-25 07:50:37 +0000