| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170629132749.997-6-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
|
|
We are gradually moving away from sector-based interfaces, towards
byte-based. In the common case, allocation is unlikely to ever use
values that are not naturally sector-aligned, but it is possible
that byte-based values will let us be more precise about allocation
at the end of an unaligned file that can do byte-based access.
Changing the signature of the function to use int64_t *pnum ensures
that the compiler enforces that all callers are updated. For now,
the io.c layer still assert()s that all callers are sector-aligned
on input and that *pnum is sector-aligned on return to the caller,
but that can be relaxed when a later patch implements byte-based
block status. Therefore, this code adds usages like
DIV_ROUND_UP(,BDRV_SECTOR_SIZE) to callers that still want aligned
values, where the call might reasonbly give non-aligned results
in the future; on the other hand, no rounding is needed for callers
that should just continue to work with byte alignment.
For the most part this patch is just the addition of scaling at the
callers followed by inverse scaling at bdrv_is_allocated(). But
some code, particularly bdrv_commit(), gets a lot simpler because it
no longer has to mess with sectors; also, it is now possible to pass
NULL if the caller does not care how much of the image is allocated
beyond the initial offset. Leave comments where we can further
simplify once a later patch eliminates the need for sector-aligned
requests through bdrv_is_allocated().
For ease of review, bdrv_is_allocated_above() will be tackled
separately.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
According to specification:
"'MSWIN4.1' is the recommanded setting, because it is the setting least likely
to cause compatibility problems. If you want to put something else in here,
that is your option, but the result may be that some FAT drivers might not
recognize the volume."
Specification: "FAT: General overview of on-disk format" v1.03, page 9
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Specification: "FAT: General overview of on-disk format" v1.03, page 23
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
FAT12/FAT16 root directory is two sectors in size, which allows only 512 directory entries.
Prevent QEMU startup if too much files exist, instead of overflowing root directory.
Also introduce variable root_entries, which will be required for FAT32.
Fixes: https://bugs.launchpad.net/qemu/+bug/1599539/comments/4
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
More specifically:
- try without numeric-tail only if LFN didn't have invalid short chars
- start at ~1 (instead of ~0)
- handle case if numeric tail is more than one char (ie > 10)
Windows 9x Scandisk doesn't see anymore mismatches between short file names and
long file names for non-ASCII filenames.
Specification: "FAT: General overview of on-disk format" v1.03, page 31
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
More specifically, create short name from filename and change blacklist of
invalid chars to whitelist of valid chars.
Windows 9x also now correctly see long file names of filenames containing a space,
but Scandisk still complains about mismatch between SFN and LFN.
[kwolf: Build fix for this intermediate patch (it included declarations
for variables that are only used in the next patch) ]
Specification: "FAT: General overview of on-disk format" v1.03, pages 30-31
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Assume that input filename is encoded as UTF-8, so correctly create UTF-16 encoding.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
readdir() doesn't always return . and .. entries at first and in that order.
This leads to not creating them at first in the directory, which raises some
errors on file system checking utilities like MS-DOS Scandisk.
Specification: "FAT: General overview of on-disk format" v1.03, page 25
Fixes: https://bugs.launchpad.net/qemu/+bug/1599539
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Specification: "FAT: General overview of on-disk format" v1.03, pages 11-13
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
- offset_to_bootsector is the number of sectors up to FAT bootsector
- offset_to_fat is the number of sectors up to first File Allocation Table
- offset_to_root_dir is the number of sectors up to root directory sector
Replace first_sectors_number - 1 by offset_to_bootsector.
Replace first_sectors_number by offset_to_fat.
Replace faked_sectors by offset_to_rootdir.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
MODE_FAKED and MODE_RENAMED are not and were never used.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This was a complete mess. On 2299 indented lines:
- 1329 were with spaces only
- 617 with tabulations only
- 353 with spaces and tabulations
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
- bs->total_sectors is the number of sectors of the whole disk
- s->sector_count is the number of sectors of the FAT partition
This fixes the following assert in qemu-img map:
qemu-img.c:2641: get_block_status: Assertion `nb_sectors' failed.
This also fixes an infinite loop in qemu-img convert.
Fixes: 4480e0f924a42e1db8b8cfcac4d0634dd1bb27a0
Fixes: https://bugs.launchpad.net/qemu/+bug/1599539
Cc: qemu-stable@nongnu.org
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
We would like to use a same QObject type to represent numbers, whether
they are int, uint, or floats. Getters will allow some compatibility
between the various types if the number fits other representations.
Add a few more tests while at it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-7-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[parse_stats_intervals() simplified a bit, comment in
test_visitor_in_int_overflow() tidied up, suppress bogus warnings]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
This allows us to remove lots of includes of migration/migration.h
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
We now have macros in place to make it less verbose to add a scalar
to QDict and QList, so use them.
Patch created mechanically via:
spatch --sp-file scripts/coccinelle/qobject.cocci \
--macro-file scripts/cocci-macro-file.h --dir . --in-place
then touched up manually to fix a couple of '?:' back to original
spacing, as well as avoiding a long line in monitor.c.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170427215821.19397-7-eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
A few block drivers will set the BDS read_only flag from their
.bdrv_open() function. This means the bs->read_only flag could
be set after we enable copy_on_read, as the BDRV_O_COPY_ON_READ
flag check occurs prior to the call to bdrv->bdrv_open().
This adds an error return to bdrv_set_read_only(), and an error will be
return if we try to set the BDS to read_only while copy_on_read is
enabled.
This patch also changes the behavior of vvfat. Before, vvfat could
override the drive 'readonly' flag with its own, internal 'rw' flag.
For instance, this -drive parameter would result in a writable image:
"-drive format=vvfat,dir=/tmp/vvfat,rw,if=virtio,readonly=on"
This is not correct. Now, attempting to use the above -drive parameter
will result in an error (i.e., 'rw' is incompatible with 'readonly=on').
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 0c5b4c1cc2c651471b131f21376dfd5ea24d2196.1491597120.git.jcody@redhat.com
|
|
We have a helper wrapper for checking for the BDS read_only flag,
add a helper wrapper to set the read_only flag as well.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 9b18972d05f5fa2ac16c014f0af98d680553048d.1491597120.git.jcody@redhat.com
|
|
If bdrv_is_allocated() fails, we should react to that failure.
For 2 of the 3 callers, reporting the error was easy. But in
cluster_was_modified() and its lone caller
get_cluster_count_for_direntry(), it's rather invasive to update
the logic to pass the error back; so there, I went with merely
documenting the issue by changing the return type to bool (in
all likelihood, treating the cluster as modified will then
trigger a read which will also fail, and eventually get to an
error - but given the appalling number of abort() calls in this
code, I'm not making it any worse).
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Not all callers of bdrv_set_backing_hd() know for sure that attaching
the backing file will be allowed by the permission system. Return the
error from the function rather than aborting.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
|
|
vvfat is the last remaining driver that can have children, but doesn't
implement .bdrv_child_perm() yet. The default handlers aren't suitable
here, so let's implement a very simple driver-specific one that protects
the internal child from being used by other users as good as our
permissions permit.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
|
|
We should not try to assign a not yet opened node as the backing file,
because as soon as the permission system is added it will fail. The
just added bdrv_new_open_driver() function is the right tool to open a
file with an internal driver, use it.
In case anyone wonders whether that magic fake backing file to trigger a
special action on 'commit' actually works today: No, not for me. One
reason is that we've been adding a raw format driver on top for several
years now and raw doesn't support commit. Other reasons include that the
backing file isn't writable and the driver doesn't support reopen, and
it's also size 0 and the driver doesn't support bdrv_truncate. All of
these are easily fixable, but then 'commit' ended up in an infinite loop
deep in the vvfat code for me, so I thought I'd best leave it alone. I'm
not really sure what it was supposed to do anyway.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
|
|
If a migration is already in progress and somebody attempts
to add a migration blocker, this should rightly fail.
Add an errp parameter and a retcode return value to migrate_add_blocker.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Message-Id: <1484566314-3987-5-git-send-email-ashijeetacharya@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Merged with recent 'Allow invtsc migration' change
|
|
Remove the "// assert(is_consistent(s))" comment in block/vvfat.c
Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Message-Id: <1484566314-3987-2-git-send-email-ashijeetacharya@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
This adds the "read-only" option to the QDict. One important effect of
this change is that when a child inherits options from its parent, the
existing "read-only" mode can be preserved if it was explicitly set
previously.
This addresses scenarios like this:
[E] <- [D] <- [C] <- [B] <- [A]
In this case, if we reopen [D] with read-only=off, and later reopen
[B], then [D] will not inherit read-only=on from its parent during the
bdrv_reopen_queue_child() stage.
The BDRV_O_RDWR flag is not removed yet, but its keep in sync with the
value of the "read-only" option.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
First, bdrv_open_child() expects all options for the child to be
prefixed by the child's name (and a separating dot). Second,
bdrv_open_child() does not take ownership of the QDict passed to it but
only extracts all options for the child, so if a QDict is created for
the sole purpose of passing it to bdrv_open_child(), it needs to be
freed afterwards.
This patch makes vvfat adhere to both of these rules.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20160711135452.11304-1-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
vvfat uses a temporary qcow file to cache written data in read-write
mode. In order to do things properly, this should show up in the BDS
graph and I/O should go through BdrvChild like for every other node.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Using int for values that are only used as booleans is confusing.
While at it, rearrange a couple of members so that all the bools
are contiguous.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
It makes more sense to have ALL block size limit constraints
in the same struct. Improve the documentation while at it.
Simplify a couple of conditionals, now that we have audited and
documented that request_alignment is always non-zero.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
We want to eventually stick request_alignment alongside other
BlockLimits, but first, we must ensure it is populated at the
same time as all other limits, rather than being a special case
that is set only when a block is first opened.
Add a .bdrv_refresh_limits() to all four of our legacy devices
that will always be sector-only (bochs, cloop, dmg, vvfat), in
spite of their recent conversion to expose a byte interface.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Use Coccinelle script to replace 'ret = E; return ret' with
'return E'. The script will do the substitution only when the
function return type and variable type are the same.
Manual fixups:
* audio/audio.c: coding style of "read (...)" and "write (...)"
* block/qcow2-cluster.c: wrap line to make it shorter
* block/qcow2-refcount.c: change indentation of wrapped line
* target-tricore/op_helper.c: fix coding style of
"remainder|quotient"
* target-mips/dsp_helper.c: reverted changes because I don't
want to argue about checkpatch.pl
* ui/qemu-pixman.c: fix line indentation
* block/rbd.c: restore blank line between declarations and
statements
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1465855078-19435-4-git-send-email-ehabkost@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Unused Coccinelle rule name dropped along with a redundant comment;
whitespace touched up in block/qcow2-cluster.c; stale commit message
paragraph deleted]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Replace (((n) + (d) - 1) /(d)) by DIV_ROUND_UP(n,d).
This patch is the result of coccinelle script
scripts/coccinelle/round.cocci
CC: qemu-block@nongnu.org
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
There are no callers to bdrv_open() or bdrv_open_inherit() left that
pass a pointer to a non-NULL BDS pointer as the first argument of these
functions, so we can finally drop that parameter and just make them
return the new BDS.
Generally, the following pattern is applied:
bs = NULL;
ret = bdrv_open(&bs, ..., &local_err);
if (ret < 0) {
error_propagate(errp, local_err);
...
}
by
bs = bdrv_open(..., errp);
if (!bs) {
ret = -EINVAL;
...
}
Of course, there are only a few instances where the pattern is really
pure.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Move it to the actual users. There are still a few includes of
qemu/bswap.h in headers; removing them is left for future work.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This doesn't really convert any of the actual vvfat logic to use
vectored I/O (and it's doubtful whether that would make sense), but
instead just adapts the wrappers to the modern interface.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
|
|
Commit d5941dd documented that it leaves the default volume name as it
was ("QEMU VVFAT"), but it doesn't actually implement this. You get an
empty name (eleven space characters) instead.
This fixes the implementation to apply the advertised default.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Commit d5941dd made the volume name configurable, but it didn't consider
that the rw code compares the volume name string to assert that the
first directory entry is the volume name. This made vvfat crash in rw
mode.
This fixes the assertion to compare with the configured volume name
instead of a literal string.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
The previous patches have successively made blk->enable_write_cache the
true source for the information whether a writethrough mode must be
implemented. The corresponding BDRV_O_CACHE_WB is only useless baggage
we're carrying around, so now's the time to remove it.
At the same time, we remove the 'cache.writeback' option parsing on the
BDS level as the only effect was setting the BDRV_O_CACHE_WB flag.
This change requires test cases that explicitly enabled the option to
drop it. Other than that and the change of the error message when
writethrough is enabled on the BDS level (from "Can't set writethrough
mode" to "doesn't support the option"), there should be no change in
behaviour.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
|
|
Move declarations out of qemu-common.h for functions declared in
utils/ files: e.g. include/qemu/path.h for utils/path.c.
Move inline functions out of qemu-common.h and into new files (e.g.
include/qemu/bcd.h)
Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef. Since then, we've moved to include qemu/osdep.h
everywhere. Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h. That's in excess of
100KiB of crap most .c files don't actually need.
Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h. Include qapi/error.h in .c files that need it and don't
get it now. Include qapi-types.h in qom/object.h for uint16List.
Update scripts/clean-includes accordingly. Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h
comment quoted above similarly.
This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third. Unfortunately, the number depending on
qapi-types.h shrinks only a little. More work is needed for that one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The added parameter can be used to return the BDS pointer which the
valid offset is referring to. Its value should be ignored unless
BDRV_BLOCK_OFFSET_VALID in ret is set.
Until block drivers fill in the right value, let's clear it explicitly
right before calling .bdrv_get_block_status.
The "bs->file" condition in bdrv_co_get_block_status is kept now to keep iotest
case 102 passing, and will be fixed once all drivers return the right file
pointer.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1453780743-16806-2-git-send-email-famz@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
bdrv_swap() is unused now. Remove it and all functions that have
no other users than bdrv_swap(). In particular, this removes the
.bdrv_rebind callbacks from block drivers.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
This simplifies the code somewhat, especially when dropping whole
backing file subchains.
The exception is the mirroring code that does adventurous things with
bdrv_swap() and in order to keep it working, I had to duplicate most of
bdrv_set_backing_hd() locally. We'll get rid again of this ugliness
shortly.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
This is the final step in converting all of the BlockDriverState
pointers that block drivers use to BdrvChild.
After this patch, bs->children contains the full list of child nodes
that are referenced by a given BDS, and these children are only
referenced through BdrvChild, so that updating the pointer in there is
enough for changing edges in the graph.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Now that this parameter is effectively unused, we can drop it and just
pass NULL on to bdrv_open_inherit().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
