summaryrefslogtreecommitdiff
path: root/block
AgeCommit message (Collapse)AuthorFilesLines
2011-10-21block: change discard to co_discardPaolo Bonzini2-6/+13
Since coroutine operation is now mandatory, convert both bdrv_discard implementations to coroutines. For qcow2, this means taking the lock around the operation. raw-posix remains synchronous. The bdrv_discard callback is then unused and can be eliminated. Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-21block: change flush to co_flushPaolo Bonzini8-30/+29
Since coroutine operation is now mandatory, convert all bdrv_flush implementations to coroutines. For qcow2, this means taking the lock. Other implementations are simpler and just forward bdrv_flush to the underlying protocol, so they can avoid the lock. The bdrv_flush callback is then unused and can be eliminated. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-21block: take lock around bdrv_write implementationsPaolo Bonzini5-5/+60
This does the first part of the conversion to coroutines, by wrapping bdrv_write implementations to take the mutex. Drivers that implement bdrv_write rather than bdrv_co_writev can then benefit from asynchronous operation (at least if the underlying protocol supports it, which is not the case for raw-win32), even though they still operate with a bounce buffer. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-21block: take lock around bdrv_read implementationsPaolo Bonzini9-9/+108
This does the first part of the conversion to coroutines, by wrapping bdrv_read implementations to take the mutex. Drivers that implement bdrv_read rather than bdrv_co_readv can then benefit from asynchronous operation (at least if the underlying protocol supports it, which is not the case for raw-win32), even though they still operate with a bounce buffer. raw-win32 does not need the lock, because it cannot yield. nbd also doesn't probably, but better be safe. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-21block: add a CoMutex to synchronous read driversPaolo Bonzini9-0/+18
The big conversion of bdrv_read/write to coroutines caused the two homonymous callbacks in BlockDriver to become reentrant. It goes like this: 1) bdrv_read is now called in a coroutine, and calls bdrv_read or bdrv_pread. 2) the nested bdrv_read goes through the fast path in bdrv_rw_co_entry; 3) in the common case when the protocol is file, bdrv_co_do_readv calls bdrv_co_readv_em (and from here goes to bdrv_co_io_em), which yields until the AIO operation is complete; 4) if bdrv_read had been called from a bottom half, the main loop is free to iterate again: a device model or another bottom half can then come and call bdrv_read again. This applies to all four of read/write/flush/discard. It would also apply to is_allocated, but it is not used from within coroutines: besides qemu-img.c and qemu-io.c, which operate synchronously, the only user is the monitor. Copy-on-read will introduce a use in the block layer, and will require converting it. The solution is "simply" to convert all drivers to coroutines! We just need to add a CoMutex that is taken around affected operations. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-21vmdk: clean up openPaolo Bonzini1-22/+15
Move vmdk_parent_open to vmdk_open. There's another path how vmdk_parent_open can be reached: vmdk_parse_extents() -> vmdk_open_sparse() -> vmdk_open_vmdk4() -> vmdk_open_desc_file(). If that can happen, however, the code is bogus. vmdk_parent_open reads from bs->file: if (bdrv_pread(bs->file, s->desc_offset, desc, DESC_SIZE) != DESC_SIZE) { but it is always called with s->desc_offset == 0 and with the same bs->file. So the data that vmdk_parent_open reads comes always from the same place, and anyway there is only one place where it can write it, namely bs->backing_file. So, if it cannot happen, the patched code is okay. It is also possible that the recursive call can happen, but only once. In that case there would still be a bug in vmdk_open_desc_file setting s->desc_offset = 0, but the patched code is okay. Finally, in the case where multiple recursive calls can happen the code would need to be rewritten anyway. It is likely that this would anyway involve adding several parameters to vmdk_parent_open, and calling it from vmdk_open_vmdk4. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-21vmdk: fix return values of vmdk_parent_openPaolo Bonzini1-6/+9
While vmdk_open_desc_file (touched by the patch) correctly changed -1 to -EINVAL, vmdk_open did not. Fix it directly in vmdk_parent_open. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-21qcow2: Fix bdrv_write_compressed error handlingKevin Wolf2-13/+22
If during allocation of compressed clusters the cluster was already allocated uncompressed, fail and properly release the l2_table (the latter avoids a failed assertion). While at it, make it return some real error numbers instead of -1. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
2011-10-21block: add bdrv_co_discard and bdrv_aio_discard supportPaolo Bonzini1-4/+6
This similarly adds support for coroutine and asynchronous discard. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-21block: drop redundant bdrv_flush implementationStefan Hajnoczi7-74/+3
Block drivers now only need to provide either of .bdrv_co_flush, .bdrv_aio_flush() or for legacy drivers .bdrv_flush(). Remove the redundant .bdrv_flush() implementations. [Paolo Bonzini: change raw driver to bdrv_co_flush] Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-21sheepdog: add coroutine_fn markersPaolo Bonzini1-7/+7
This makes the following patch easier to review. Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-14Merge remote-tracking branch 'kwolf/for-anthony' into stagingAnthony Liguori3-382/+60
2011-10-14block: use coroutine interface for raw formatStefan Hajnoczi1-24/+8
The raw format delegates all operations to bs->file (the protocol). Previously this block driver exposed both sync and aio interfaces. Since the block layer now works in terms of coroutines, expose the coroutine interfaces and drop the others. This avoids unnecessary emulation of sync and aio interfaces. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-14raw-posix: remove bdrv_read()/bdrv_write()Stefan Hajnoczi1-277/+0
Block drivers only need to provide one of sync, aio, or coroutine interfaces. Since raw-posix.c provides aio interfaces, simply drop the synchronous interfaces since they can be emulated using aio and coroutines. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-14block/qcow: Fix use of free() instead of g_free()Stefan Weil1-1/+1
cppcheck reported this error: qemu/block/qcow.c:599: error: Mismatching allocation and deallocation: cluster_data Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-10-14sheepdog: correct spellingDong Xu Wang1-1/+1
Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-10-11vvfat: Fix potential buffer overflowKevin Wolf1-1/+1
path2[PATH_MAX] can be used for the null termination, so make the array big enough to allow this. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-11block/vvfat: Remove unused codeStefan Weil1-56/+0
The unused code was detected using cppcheck. Cc: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-11block/vvfat: Fix potential memory leaks and other memory errorsStefan Weil1-21/+30
cppcheck reported memory leaks and mismatched g_malloc() with free() instead of g_free(). Fix these errors. Cc: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-11block: allow resizing of images residing on host devicesChristoph Hellwig1-3/+21
Allow to resize images that reside on host devices up to the available space. This allows to grow images after resizing the device manually or vice versa. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-05qed: fix use-after-free during l2 cache commitStefan Hajnoczi2-5/+5
QED's metadata caching strategy allows two parallel requests to race for metadata lookup. The first one to complete will populate the metadata cache and the second one will drop the data it just read in favor of the cached data. There is a use-after-free in qed_read_l2_table_cb() and qed_commit_l2_update() where l2_table->offset was used after the l2_table may have been freed due to a metadata lookup race. Fix this by keeping the l2_offset in a local variable and not reaching into the possibly freed l2_table. Reported-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-21block/curl: Don't finish AIOCBs too earlyNick Thomas1-19/+49
The previous behaviour was to finish AIOCBs inside curl_aio_readv() if the data was cached. This caused the following failed assertion at hw/ide/pci.c:314: bmdma_cmd_writeb "Assertion `bm->bus->dma->aiocb == ((void *)0)' failed." By scheduling a QEMUBH and performing the completion inside the callback, we avoid this problem. Signed-off-by: Nick Thomas <nick@bytemark.co.uk> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-21block/curl: Implement a flush function on the fd handlersNick Thomas1-4/+22
Signed-off-by: Nick Thomas <nick@bytemark.co.uk> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-20rbd: allow escaping in config stringSage Weil1-2/+27
The config string is variously delimited by =, @, and /, depending on the field. Allow these characters to be escaped by preceeding them with \. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-20rbd: call flush, if availableSage Weil1-0/+12
librbd recently added async writeback and flush support. If the new rbd_flush() call is available, call it. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-20rbd: update comment headingSage Weil1-15/+13
Properly document the configuration string syntax and semantics. Remove (out of date) details about the librbd implementation. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-20rbd: ignore failures when reading from default conf locationSage Weil1-10/+4
If we are reading from the default config location, ignore any failures. It is perfectly legal for the user to specify exactly the options they need and to not rely on any config file. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-20VMDK: fix leak of extent_fileFam Zheng1-4/+10
Release extent_file on error in vmdk_parse_extents. Added closing files in freeing extents. Signed-off-by: Fam Zheng <famcool@gmail.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-19raw-posix: Fix bdrv_flush error return valuesKevin Wolf1-1/+8
bdrv_flush is supposed to use 0/-errno return values Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-19nbd: support feature negotiationPaolo Bonzini1-2/+2
nbd supports writing flags in bytes 24...27 of the header, and uses that for the read-only flag. Add support for it in qemu-nbd. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-16Remove blanks before \n in output stringsStefan Weil1-1/+1
Those blanks violate the coding conventions, see scripts/checkpatch.pl. Blanks missing after colons in the changed lines were added. This patch does not try to fix tabs, long lines and other problems in the changed lines, therefore checkpatch.pl reports many violations. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-12qcow2: fix range checkFrediano Ziglio1-7/+7
QCowL2Meta::offset is not cluster aligned but only sector aligned however nb_clusters count cluster from cluster start. This fix range check. Note that old code have no corruption issues related to this check cause it only cause intersection to occur when shouldn't. Signed-off-by: Frediano Ziglio <freddy77@gmail.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12qcow2: align cluster_data to block to improve performance using O_DIRECTFrediano Ziglio1-7/+7
Signed-off-by: Frediano Ziglio <freddy77@gmail.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12qcow2: initialize metadata before inserting in cluster_allocsFrediano Ziglio1-5/+5
QCow2Meta structure was inserted into list before many fields are initialized. Currently is not a problem cause all occur in a lock but if qcow2_alloc_clusters would in a future unlock this lock some issues could arise. Initializing fields before inserting fix the problem. Signed-off-by: Frediano Ziglio <freddy77@gmail.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12nbd: Clean up use of block_int.hMarkus Armbruster1-0/+1
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12rbd: fix leak in qemu_rbd_open failure pathsSage Weil1-15/+13
Fix leak of s->snap in failure path. Simplify error paths for the whole function. Reported-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Sage Weil <sage@newdream.net> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12rbd: clean up, fix styleSage Weil1-9/+8
No assignment in condition. Remove duplicate ret > 0 check. Signed-off-by: Sage Weil <sage@newdream.net> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12rbd: allow client id to be specified in config stringSage Weil1-8/+44
Allow the client id to be specified in the config string via 'id=' so that users can control who they authenticate as. Currently they are stuck with the default ('admin'). This is necessary for anyone using authentication in their environment. Signed-off-by: Sage Weil <sage@newdream.net> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12block: Rename bdrv_set_locked() to bdrv_lock_medium()Markus Armbruster2-7/+7
While there, make the locked parameter bool. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12qcow2: removed unused depends_on fieldFrediano Ziglio2-3/+1
Signed-off-by: Frediano Ziglio <freddy77@gmail.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-06VMDK: bugfix, opening vSphere 4 exported imageFam Zheng1-2/+7
The vSphere 4 exported image is streamOptimized extent, which is not quite correctly handled. Ignore rdgOffset when RGD flag bit not set. Signed-off-by: Fam Zheng <famcool@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-06VMDK: bugfix, open Haiku vmdk imageFam Zheng1-4/+11
Haiku provides a specially formed vmdk image, which let qemu abort. It a combination of sparse header and flat data (i.e. with not l1/l2 table at all). The fix is turn to descriptor when sparse header is zero in field 'capacity'. Signed-off-by: Fam Zheng <famcool@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-06VMDK: creating streamOptimized subformatFam Zheng1-6/+12
Creating streamOptimized subformat. Added subformat option 'streamOptimized', to create a image with compression enabled and each cluster with a GrainMarker. Signed-off-by: Fam Zheng <famcool@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-06VMDK: read/write compressed extentFam Zheng1-11/+100
Add support for reading/writing compressed extent. Signed-off-by: Fam Zheng <famcool@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-06VMDK: Opening compressed extent.Fam Zheng1-0/+16
Added flags field for compressed/streamOptimized extents, open and save image configuration. Signed-off-by: Fam Zheng <famcool@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-06VMDK: separate vmdk_read_extent/vmdk_write_extentFam Zheng1-9/+45
Factor out read/write extent code, since there will be more things to take care of once reading/writing compressed clusters is introduced. Signed-off-by: Fam Zheng <famcool@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-06VMDK: add twoGbMaxExtentSparse supportFam Zheng1-50/+83
Add twoGbMaxExtentSparse support. Introduce vmdk_free_last_extent. Signed-off-by: Fam Zheng <famcool@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-06VMDK: enable twoGbMaxExtentFlatFam Zheng1-1/+3
Enable the createType 'twoGbMaxExtentFlat'. The supporting code is already in. Signed-off-by: Fam Zheng <famcool@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-06block/raw: Fix to forward method bdrv_media_changed()Markus Armbruster1-0/+7
Block driver "raw" forwards most methods to the underlying block driver. However, it doesn't implement method bdrv_media_changed(). Makes bdrv_media_changed() always return -ENOTSUP. I believe -fda /dev/fd0 gives you raw over host_floppy, and disk change detection (fdc register 7 bit 7) is broken. Testing my theory requires a computer museum, though. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-06qcow2: Fix error cases to run depedent requestsKevin Wolf1-3/+4
Requests depending on a failed request would end up waiting forever. This fixes the error path to continue dependent requests even when the request has failed. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.2.1 (git 2.18.0) at 2024-06-13 13:13:54 +0000