summaryrefslogtreecommitdiff
path: root/blockjob.c
AgeCommit message (Collapse)AuthorFilesLines
2015-07-07blockjob: add block_job_release functionTing Wang1-8/+12
There is job resource leak in function mirror_start_job, although bdrv_create_dirty_bitmap is unlikely failed. Add block_job_release for each release when needed. Signed-off-by: Ting Wang <kathy.wangting@huawei.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 1435311455-56048-1-git-send-email-kathy.wangting@huawei.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-22Include qapi/qmp/qerror.h exactly where neededMarkus Armbruster1-0/+1
In particular, don't include it into headers. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22qerror: Clean up QERR_ macros to expand into a single stringMarkus Armbruster1-4/+4
These macros expand into error class enumeration constant, comma, string. Unclean. Has been that way since commit 13f59ae. The error class is always ERROR_CLASS_GENERIC_ERROR since the previous commit. Clean up as follows: * Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and delete it from the QERR_ macro. No change after preprocessing. * Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into error_setg(...). Again, no change after preprocessing. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-04-28blockjob: Allow nested pauseFam Zheng1-6/+17
This patch changes block_job_pause to increase the pause counter and block_job_resume to decrease it. The counter will allow calling block_job_pause/block_job_resume unconditionally on a job when we need to suspend the IO temporarily. From now on, each block_job_resume must be paired with a block_job_pause to keep the counter balanced. The user pause from QMP or HMP will only trigger block_job_pause once until it's resumed, this is achieved by adding a user_paused flag in BlockJob. One occurrence of block_job_resume in mirror_complete is replaced with block_job_enter which does what is necessary. In block_job_cancel, the cancel flag is good enough to instruct coroutines to quit loop, so use block_job_enter to replace the unpaired block_job_resume. Upon block job IO error, user is notified about the entering to the pause state, so this pause belongs to user pause, set the flag accordingly and expect a matching QMP resume. [Extended doc comments as suggested by Paolo Bonzini <pbonzini@redhat.com>. --Stefan] Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Message-id: 1428069921-2957-2-git-send-email-famz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-11-03block: declare blockjobs and dataplane friends!Stefan Hajnoczi1-0/+1
Now that blockjobs use AioContext they are safe for use with dataplane. Unblock them! Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1413889440-32577-12-git-send-email-stefanha@redhat.com
2014-11-03blockjob: add block_job_defer_to_main_loop()Stefan Hajnoczi1-0/+45
Block jobs will run in the BlockDriverState's AioContext, which may not always be the QEMU main loop. There are some block layer APIs that are either not thread-safe or risk lock ordering problems. This includes bdrv_unref(), bdrv_close(), and anything that calls bdrv_drain_all(). The block_job_defer_to_main_loop() API allows a block job to schedule a function to run in the main loop with the BlockDriverState AioContext held. This function will be used to perform cleanup and backing chain manipulations in block jobs. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1413889440-32577-6-git-send-email-stefanha@redhat.com
2014-11-03blockjob: Add "ready" fieldMax Reitz1-0/+3
When a block job signals readiness, this is currently reported only through QMP. If qemu wants to use block jobs for internal tasks, there needs to be another way to correctly detect when a block job may be completed. For this reason, introduce a bool "ready" which is set when the block job may be completed. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1414159063-25977-6-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-11-03blockjob: Introduce block_job_complete_sync()Max Reitz1-7/+32
Implement block_job_complete_sync() by doing the exact same thing as block_job_cancel_sync() does, only with calling block_job_complete() instead of block_job_cancel(). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1414159063-25977-5-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-10-20block: Rename BlockDriverCompletionFunc to BlockCompletionFuncMarkus Armbruster1-2/+2
I'll use it with block backends shortly, and the name is going to fit badly there. It's a block layer thing anyway, not just a block driver thing. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20block: Eliminate BlockDriverState member device_name[]Markus Armbruster1-1/+2
device_name[] can become non-empty only in bdrv_new_root() and bdrv_move_feature_fields(). The latter is used only to undo damage done by bdrv_swap(). The former is called only by blk_new_with_bs(). Therefore, when a BlockDriverState's device_name[] is non-empty, then it's been created with a BlockBackend, and vice versa. Furthermore, blk_new_with_bs() keeps the two names equal. Therefore, device_name[] is redundant. Eliminate it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-08-29coroutine: Drop co_sleep_nsFam Zheng1-1/+1
block_job_sleep_ns is the only user. Since we are moving towards AioContext aware code, it's better to use the explicit version and drop the old one. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Benoît Canet <benoit.canet@nodalink.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-07-09block: prefer aio_poll to qemu_aio_waitPaolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-06-27blockjob: Fix recent BLOCK_JOB_ERROR regressionMarkus Armbruster1-1/+1
Commit 5a2d2cb screwed up the the value of members device and action, breaking tests/qemu-iotests/041. Signed-off-by: Markus Armbruster <armbru@redhat.com> Tested-By: Benoit Canet <benoit@irqsave.net> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-06-27blockjob: Fix recent BLOCK_JOB_READY regressionMarkus Armbruster1-1/+5
Commit bcada37 dropped the (up to now undocumented) members type, len, offset, speed, breaking tests/qemu-iotests/040 and 041. Restore and document them. This fixes 040, and partially fixes 041. Signed-off-by: Markus Armbruster <armbru@redhat.com> Tested-By: Benoit Canet <benoit@irqsave.net> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-06-26blockjob: Add block_job_yield()Fam Zheng1-0/+14
This will unset busy flag and put coroutine to sleep, can be used to wait for QMP complete/cancel. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-06-23qapi event: convert other BLOCK_JOB eventsWenchao Xia1-16/+20
Since BLOCK_JOB_COMPLETED, BLOCK_JOB_CANCELLED, BLOCK_JOB_READY are related, convert them in one patch. The block_job_event_* functions are used to keep encapsulation of BlockJob structure. Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-23qapi event: convert BLOCK_IO_ERROR and BLOCK_JOB_ERRORWenchao Xia1-1/+5
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-23qapi: adjust existing definesWenchao Xia1-5/+6
In order to let event defines use existing types later, instead of redefine new ones, some old type defines for spice and vnc are changed, and BlockErrorAction is moved from block.h to qapi schema. Note that BlockErrorAction is not merged with BlockdevOnError. At this point, VncInfo is not made a child of VncBasicInfo, because VncBasicInfo has mandatory fields where VncInfo makes them optional. Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-28block: Move op_blocker check from block_job_create to its callerFam Zheng1-1/+1
It makes no sense to check for "any" blocker on bs, we are here only because of the mechanical conversion from in_use to op_blockers. Remove it now, and let the callers check specific operation types. Backup and mirror already have it, add checker to stream and commit. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-05-28block: Replace in_use with operation blockerFam Zheng1-5/+9
This drops BlockDriverState.in_use with op_blockers: - Call bdrv_op_block_all in place of bdrv_set_in_use(bs, 1). - Call bdrv_op_unblock_all in place of bdrv_set_in_use(bs, 0). - Check bdrv_op_is_blocked() in place of bdrv_in_use(bs). The specific types are used, e.g. in place of starting block backup, bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_BACKUP, ...). There is one exception in block_job_create, where bdrv_op_blocker_is_empty() is used, because we don't know the operation type here. This doesn't matter because in a few commits away we will drop the check and move it to callers that _do_ know the type. - Check bdrv_op_blocker_is_empty() in place of assert(!bs->in_use). Note: there is only bdrv_op_block_all and bdrv_op_unblock_all callers at this moment. So although the checks are specific to op types, this changes can still be seen as identical logic with previously with in_use. The difference is error message are improved because of blocker error info. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-25qerror.h: Replace QERR_NOT_SUPPORTED with QERR_UNSUPPORTEDCole Robinson1-1/+1
The former is only used twice, the latter is used over 30 times, and has a nicer error message. Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-02-17Use error_is_set() only when necessaryMarkus Armbruster1-2/+2
error_is_set(&var) is the same as var != NULL, but it takes whole-program analysis to figure that out. Unnecessarily hard for optimizers, static checkers, and human readers. Dumb it down to obvious. Gets rid of several dozen Coverity false positives. Note that the obvious form is already used in many places. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-10-11qapi: make use of new BlockJobTypeFam Zheng1-2/+2
Switch the string to enum type BlockJobType in BlockJobDriver. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-10-11blockjob: rename BlockJobType to BlockJobDriverFam Zheng1-11/+11
We will use BlockJobType as the enum type name of block jobs in QAPI, rename current BlockJobType to BlockJobDriver, which will eventually become a set of operations, similar to block drivers. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-09-06block: use BDS ref for block jobsFam Zheng1-0/+1
Block jobs used drive_get_ref(drive_get_by_blockdev(bs)) to avoid BDS being deleted. Now we have BDS reference count, and block jobs don't care about dinfo, so replace them to get cleaner code. It is also the safe way when BDS has no drive info. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22aio / timers: convert block_job_sleep_ns and co_sleep_ns to new APIAlex Bligh1-2/+2
Convert block_job_sleep_ns and co_sleep_ns to use the new timer API. Signed-off-by: Alex Bligh <alex@alex.org.uk> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2012-12-19misc: move include files to include/qemu/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19monitor: move include files to include/monitor/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19block: move include files to include/block/Paolo Bonzini1-4/+4
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19qapi: move include files to include/qobject/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-24iostatus: forward block_job_iostatus_reset to block jobPaolo Bonzini1-0/+3
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-10-24block: introduce BLOCK_JOB_READY eventPaolo Bonzini1-0/+21
Even for jobs that need to be manually completed, management may want to take care itself of the completion, not requiring the user to issue a command to terminate the job. In this case we want to avoid that they poll us continuously, waiting for completion to become available. Thus, add a new event that signals the phase switch and the availability of the block-job-complete command. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-10-24block: add block-job-completePaolo Bonzini1-0/+10
While streaming can be dropped as soon as it progressed through the whole image, mirroring needs to be completed manually for two reasons: 1) so that management knows exactly when the VM switches to the target; 2) because for other use cases such as replication, we may leave the operation running for the whole life of the virtual machine. Add a new block job command that manually completes background operations. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-10-24block: rename block_job_complete to block_job_completedPaolo Bonzini1-1/+1
The imperative will be used for the QMP command. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-28block: introduce block job errorPaolo Bonzini1-7/+56
The following behaviors are possible: 'report': The behavior is the same as in 1.1. An I/O error, respectively during a read or a write, will complete the job immediately with an error code. 'ignore': An I/O error, respectively during a read or a write, will be ignored. For streaming, the job will complete with an error and the backing file will be left in place. For mirroring, the sector will be marked again as dirty and re-examined later. 'stop': The job will be paused and the job iostatus will be set to failed or nospace, while the VM will keep running. This can only be specified if the block device has rerror=stop and werror=stop or enospc. 'enospc': Behaves as 'stop' for ENOSPC errors, 'report' for others. In all cases, even for 'report', the I/O error is reported as a QMP event BLOCK_JOB_ERROR, with the same arguments as BLOCK_IO_ERROR. It is possible that while stopping the VM a BLOCK_IO_ERROR event will be reported and will clobber the event from BLOCK_JOB_ERROR, or vice versa. This is not really avoidable since stopping the VM completes all pending I/O requests. In fact, it is already possible now that a series of BLOCK_IO_ERROR events are reported with rerror=stop, because vm_stop calls bdrv_drain_all and this can generate further errors. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-28block: add support for job pause/resumePaolo Bonzini1-5/+30
Job pausing reuses the existing support for cancellable sleeps. A pause happens at the next sleeping point and lasts until the coroutine is re-entered explicitly. Cancellation was already doing a forced resume, so implement it explicitly in terms of resume. Paused jobs cannot be canceled without first resuming them. This ensures that I/O errors are never missed by management. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-28qmp: add 'busy' member to BlockJobInfoPaolo Bonzini1-0/+1
Because pausing a job is asynchronous, we need to know whether it has completed. This is described by the "busy" field of BlockJob; copy it to BlockJobInfo. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-28block: add block_job_queryPaolo Bonzini1-0/+11
Extract it out of the implementation of info block-jobs. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-28block: move job APIs to separate filesPaolo Bonzini1-0/+163
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>