summaryrefslogtreecommitdiff
path: root/configure
AgeCommit message (Collapse)AuthorFilesLines
2017-04-10configure: on Windows minimum glib version must be 2.30Peter Maydell1-1/+5
In the 2.7 release we stated in the ChangeLog that the minimum glib version for Windows hosts was 2.30, but we didn't update configure to enforce this because we were very close to the release at the point where we noticed the issue, and it only affected building the test suite. We then forgot that we needed to do it. Fix the omission. (The reason for the 2.30 requirement is use of g_dir_make_tmp() -- our fallback implementation uses mkdtemp(), which isn't available on Windows.) Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Stefan Weil <sw@weilnetz.de> Message-id: 1491224655-5776-1-git-send-email-peter.maydell@linaro.org
2017-04-03configure: Mark SPARC as supportedPeter Maydell1-2/+3
Thanks to John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> and the Debian Project, we now have access to a SPARC Linux system we can use for build testing. Move SPARC back into the "supported" list. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1490698718-23762-1-git-send-email-peter.maydell@linaro.org
2017-03-31Merge remote-tracking branch 'remotes/mdroth/tags/qga-pull-2017-03-30-tag' ↵Peter Maydell1-0/+7
into staging qemu-ga patch queue for 2.9 * fix make check failure of guest-get-fsinfo when nested virtual block device partitions are mounted in the test environment * fix static compilation for mingw builds # gpg: Signature made Fri 31 Mar 2017 04:52:40 BST # gpg: using RSA key 0x3353C9CEF108B584 # gpg: Good signature from "Michael Roth <flukshun@gmail.com>" # gpg: aka "Michael Roth <mdroth@utexas.edu>" # gpg: aka "Michael Roth <mdroth@linux.vnet.ibm.com>" # Primary key fingerprint: CEAC C9E1 5534 EBAB B82D 3FA0 3353 C9CE F108 B584 * remotes/mdroth/tags/qga-pull-2017-03-30-tag: qga: Make qemu-ga compile statically for Windows qga: don't fail if mount doesn't have slave devices Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-03-30qga: Make qemu-ga compile statically for WindowsSameeh Jubran1-0/+7
Attempting to compile qemu-ga statically as follows for Windows causes the following error: Compilation: ./configure --disable-docs --target-list=x86_64-softmmu \ --cross-prefix=x86_64-w64-mingw32- --static \ --enable-guest-agent-msi --with-vss-sdk=/path/to/VSSSDK72 make -j8 qemu-ga Error: path/to/qemu/stubs/error-printf.c:7: undefined reference to `__imp_g_test_config_vars' collect2: error: ld returned 1 exit status Makefile:444: recipe for target 'qemu-ga.exe' failed make: *** [qemu-ga.exe] Error 1 This is caused by a bug in the pkg-config file for glib as it doesn't define GLIB_STATIC_COMPILATION for pkg-config --static. Signed-off-by: Sameeh Jubran <sameeh@daynix.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-30configure: Don't claim 'unsupported host OS' when better message availablePeter Maydell1-1/+13
The change in commit 898be3e0415c6d which made completely unrecognized OSes cause an error_exit "Unsupported host OS" has some unfortunate unintended effects: * if you run 'configure --help' on an unsupported host OS (eg if intending to use it as a build machine for a cross compile to a supported host) then the message is printed instead of --help * if the C compiler doesn't work or is missing (eg if you passed an incorrect --cross-prefix by mistake) the message is printed instead of the more useful 'compiler does not exist or does not work' message Fix this by postponing the error_exit in this situation until later, when we have already identified the more useful cases for this. The long term fix for this would be to move handling of --help much further up in the configure script, and make its output not dependent on checks that configure runs. However for 2.9 this would be too invasive. Reported-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stefan Weil <sw@weilnetz.de> Tested-by: Stefan Weil <sw@weilnetz.de>
2017-03-23configure: Fix cut-n-paste errors in OS deprecation warningPeter Maydell1-2/+2
Fix some cut-and-paste errors in the OS deprecation warning pointed out by Thomas Huth. Reported-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1490119729-26206-1-git-send-email-peter.maydell@linaro.org
2017-03-21configure: Warn about deprecated hostsPeter Maydell1-2/+47
We plan to drop support in a future QEMU release for host OSes and host architectures for which we have no test machine where we can build and run tests. For the 2.9 release, make configure print a warning if it is run on such a host, so that the user has some warning of the plans and can volunteer to help us maintain the port if they need it to continue to function. This commit flags up as deprecated the CPU architectures: * ia64 * sparc * anything which we don't have a TCG port for (and which was presumably using TCI) and the OSes: * GNU/kFreeBSD * DragonFly BSD * NetBSD * OpenBSD * Solaris * AIX * Haiku It also makes entirely unrecognized host OS strings be rejected rather than treated as if they were Linux (which likely never worked). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1490106717-9542-1-git-send-email-peter.maydell@linaro.org
2017-03-21add opengl_cflags to QEMU_CFLAGSGerd Hoffmann1-1/+1
... and drop OPENGL_CFLAGS from Makefiles. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 1490079888-29029-1-git-send-email-kraxel@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-03-20audio: catch missing sdl supportGerd Hoffmann1-2/+8
sdl is probed before audio, so we can simply look at $sdl so see whenever we have support or not. Throw an error in case sdl audio is requested without sdl being available. Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1490000743-3615-1-git-send-email-kraxel@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-03-20configure: remove CygwinPaolo Bonzini1-6/+0
The Cygwin target is really compiling for native Win32 with -mno-cygwin. Except, GCC 4.7.0 has finally removed the long deprecated -mno-cygwin option, and that happened about five years ago. Let it rest in peace. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> Message-id: 20170317160811.28370-1-pbonzini@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-03-14configure: add the missing help output for optional featuresLin Ma1-0/+12
Signed-off-by: Lin Ma <lma@suse.com> Message-Id: <20170310101405.26974-1-lma@suse.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-03-14build: include sys/sysmacros.h for major() and minor()Christopher Covington1-0/+18
The definition of the major() and minor() macros are moving within glibc to <sys/sysmacros.h>. Include this header when it is available to avoid the following sorts of build-stopping messages: qga/commands-posix.c: In function ‘dev_major_minor’: qga/commands-posix.c:656:13: error: In the GNU C Library, "major" is defined by <sys/sysmacros.h>. For historical compatibility, it is currently defined by <sys/types.h> as well, but we plan to remove this soon. To use "major", include <sys/sysmacros.h> directly. If you did not intend to use a system-defined macro "major", you should undefine it after including <sys/types.h>. [-Werror] *devmajor = major(st.st_rdev); ^~~~~~~~~~~~~~~~~~~~~~~~~~ qga/commands-posix.c:657:13: error: In the GNU C Library, "minor" is defined by <sys/sysmacros.h>. For historical compatibility, it is currently defined by <sys/types.h> as well, but we plan to remove this soon. To use "minor", include <sys/sysmacros.h> directly. If you did not intend to use a system-defined macro "minor", you should undefine it after including <sys/types.h>. [-Werror] *devminor = minor(st.st_rdev); ^~~~~~~~~~~~~~~~~~~~~~~~~~ The additional include allows the build to complete on Fedora 26 (Rawhide) with glibc version 2.24.90. Signed-off-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-03-13block: Drop unmaintained 'archipelago' driverEric Blake1-43/+0
The driver has failed to build since commit da34e65, in qemu 2.6, due to a missing include of qapi/error.h for error_setg(). Since no one has complained in three releases, it is easier to remove the dead code than to keep it around, especially since it is not being built by default and therefore prone to bitrot. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-02-28target/alpha: Enable MTTCG by defaultRichard Henderson1-0/+1
Alpha has a weak memory ordering and issues all of the required barriers. Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-02-25Merge remote-tracking branch 'remotes/yongbok/tags/mips-20170224-2' into stagingPeter Maydell1-1/+1
MIPS patches 2017-02-24-2 CHanges: * Add the Boston board with fixing the make check issue on 32-bit hosts. # gpg: Signature made Fri 24 Feb 2017 11:43:45 GMT # gpg: using RSA key 0x2238EB86D5F797C2 # gpg: Good signature from "Yongbok Kim <yongbok.kim@imgtec.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 8600 4CF5 3415 A5D9 4CFA 2B5C 2238 EB86 D5F7 97C2 * remotes/yongbok/tags/mips-20170224-2: hw/mips: MIPS Boston board support Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-24hw/mips: MIPS Boston board supportPaul Burton1-1/+1
Introduce support for emulating the MIPS Boston development board. The Boston board is built around an FPGA & 3 PCIe controllers, one of which is connected to an Intel EG20T Platform Controller Hub. It is used during the development & debug of new CPUs and the software intended to run on them, and is essentially the successor to the older MIPS Malta board. This patch does not implement the EG20T, instead connecting an already supported ICH-9 AHCI controller. Whilst this isn't accurate it's enough for typical stock Boston software (eg. Linux kernels) to work with hard disks given that both the ICH-9 & EG20T implement the AHCI specification. Boston boards typically boot kernels in the FIT image format, and this patch will treat kernels provided to QEMU as such. When loading a kernel directly, the board code will generate minimal firmware much as the Malta board code does. This firmware will set up the CM, CPC & GIC register base addresses then set argument registers & jump to the kernel entry point. Alternatively, bootloader code may be loaded using the bios argument in which case no firmware will be generated & execution will proceed from the start of the boot code at the default MIPS boot exception vector (offset 0x1fc00000 into (c)kseg1). Currently real Boston boards are always used with FPGA bitfiles that include a Global Interrupt Controller (GIC), so the interrupt configuration is only defined for such cases. Therefore the board will only allow use of CPUs which implement the CPS components, including the GIC, and will otherwise exit with a message. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com> [yongbok.kim@imgtec.com: isolated boston machine support for mips64el. updated for recent Chardev changes. ignore missing bios/kernel for qtest. added default -drive to if=ide explicitly. changed default memory size into 1G due to make check failure on 32-bit hosts] Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-02-24tcg: enable MTTCG by default for ARM on x86 hostsAlex Bennée1-0/+6
This enables the multi-threaded system emulation by default for ARMv7 and ARMv8 guests using the x86_64 TCG backend. This is because on the guest side: - The ARM translate.c/translate-64.c have been converted to - use MTTCG safe atomic primitives - emit the appropriate barrier ops - The ARM machine has been updated to - hold the BQL when modifying shared cross-vCPU state - defer powerctl changes to async safe work All the host backends support the barrier and atomic primitives but need to provide same-or-better support for normal load/store operations. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Acked-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Pranith Kumar <bobby.prani@gmail.com> Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
2017-02-23Revert "hw/mips: MIPS Boston board support"Peter Maydell1-1/+1
This reverts commit d3473e147a754e999718bf6fcb015d9978c6a1ee. This commit creates a board which defaults to having 2GB of RAM. Unfortunately on 32-bit hosts we can't create boards with 2GB of RAM, and so 'make check' fails. I missed this during testing of the merge, unfortunately. Luckily the offending commit is the last one in the merge request, so we can just revert it for now. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-21hw/mips: MIPS Boston board supportPaul Burton1-1/+1
Introduce support for emulating the MIPS Boston development board. The Boston board is built around an FPGA & 3 PCIe controllers, one of which is connected to an Intel EG20T Platform Controller Hub. It is used during the development & debug of new CPUs and the software intended to run on them, and is essentially the successor to the older MIPS Malta board. This patch does not implement the EG20T, instead connecting an already supported ICH-9 AHCI controller. Whilst this isn't accurate it's enough for typical stock Boston software (eg. Linux kernels) to work with hard disks given that both the ICH-9 & EG20T implement the AHCI specification. Boston boards typically boot kernels in the FIT image format, and this patch will treat kernels provided to QEMU as such. When loading a kernel directly, the board code will generate minimal firmware much as the Malta board code does. This firmware will set up the CM, CPC & GIC register base addresses then set argument registers & jump to the kernel entry point. Alternatively, bootloader code may be loaded using the bios argument in which case no firmware will be generated & execution will proceed from the start of the boot code at the default MIPS boot exception vector (offset 0x1fc00000 into (c)kseg1). Currently real Boston boards are always used with FPGA bitfiles that include a Global Interrupt Controller (GIC), so the interrupt configuration is only defined for such cases. Therefore the board will only allow use of CPUs which implement the CPS components, including the GIC, and will otherwise exit with a message. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com> [yongbok.kim@imgtec.com: isolated boston machine support for mips64el. updated for recent Chardev changes. ignore missing bios/kernel for qtest. added default -drive to if=ide explicitly] Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-02-21dtc: Update requirement to v1.4.2Paul Burton1-3/+3
In order to obtain fdt_first_subnode & fdt_next_subnode symbols from libfdt for use by a later patch, bump the requirement for dtc to v1.4.2 & the submodule to that same version. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-02-14target/openrisc: Rename the cpu from or32 to or1kRichard Henderson1-3/+3
This is in keeping with the toolchain and or1ksim. Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-02-07rules: don't try to create missing include dirsDaniel P. Berrange1-1/+1
In commit ba78db44f6532d66a1e704bd44613e841baa2fc5 Author: Daniel P. Berrange <berrange@redhat.com> Date: Wed Jan 25 16:14:10 2017 +0000 make: move top level dir to end of include search path The dir $(BUILD_DIR)/$(@D) was added to the include path. This would sometimes point to a non-existant directory, if the sub-dir in question did not contain any target-independant files (eg tcg/). To deal with this the rules.mak attempted to create the directory. While this was succesful, it also caused accidental creation of files in the parent of the build dir. e.g. when building common source files into target specific output files. Rather than trying to workaround this, just revert the code that attempted to mkdir the missing include directories. Instead just turn off the compiler warning in question as the missing dir is expected & harmless in general. NB: you can clean up a build directory parent that has been filled with empty directories by commit ba78db44f653 using this GNU find command in that parent directory: find audio backends block chardev crypto disas fsdev hw io linux-user \ migration nbd net qapi qom replay slirp target ui util \ -type d -empty -delete Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Tested-by: Alberto Garcia <berto@igalia.com> [PMM: added note about how to clean up a polluted directory] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-24nios2: Add support for Nios-II R1Marek Vasut1-0/+5
Add remaining bits of the Altera NiosII R1 support into qemu, which is documentation, MAINTAINERS file entry, configure bits, arch_init and configuration files for both linux-user (userland binaries) and softmmu (hardware emulation). Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chris Wulff <crwulff@gmail.com> Cc: Jeff Da Silva <jdasilva@altera.com> Cc: Ley Foon Tan <lftan@altera.com> Cc: Sandra Loosemore <sandra@codesourcery.com> Cc: Yves Vandervennet <yvanderv@altera.com> Reviewed-by: Alexander Graf <agraf@suse.de> Message-Id: <20170118220146.489-8-marex@denx.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-24Merge remote-tracking branch 'remotes/rth/tags/pull-hppa-20170123' into stagingPeter Maydell1-1/+6
hppa-linux target support # gpg: Signature made Mon 23 Jan 2017 17:54:09 GMT # gpg: using RSA key 0xAD1270CC4DD0279B # gpg: Good signature from "Richard Henderson <rth7680@gmail.com>" # gpg: aka "Richard Henderson <rth@redhat.com>" # gpg: aka "Richard Henderson <rth@twiddle.net>" # Primary key fingerprint: 9CB1 8DDA F8E8 49AD 2AFC 16A4 AD12 70CC 4DD0 279B * remotes/rth/tags/pull-hppa-20170123: (25 commits) target-hppa: Implement floating-point insns target-hppa: Implement system and memory-management insns target-hppa: Implement loads and stores target-hppa: Implement shifts and deposits target-hppa: Implement linux-user gateway page target-hppa: Implement branches target-hppa: Implement basic arithmetic target-hppa: Add nullification framework target-hppa: Add framework and enable compilation target-hppa: Add softfloat specializations linux-user: Add HPPA startup and main loop linux-user: Add HPPA signal handling linux-user: Add HPPA target_signal.h and target_cpu.h linux-user: Add HPPA target_structs.h linux-user: Add HPPA definitions to syscall_defs.h linux-user: Add HPPA target_syscall.h linux-user: Add HPPA termbits.h linux-user: Add HPPA syscall numbers linux-user: Add HPPA socket.h definitions linux-user: Add some hppa ioctls ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-23target-hppa: Add framework and enable compilationRichard Henderson1-3/+3
This is just about the minimum required to enable compilation without actually executing any instructions. This contains the HPPACPU structure and the required callbacks, the gdbstub, the basic translation loop, and a translate_one function that always results in an illegal instruction. Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-22Revert "Remove remainders of HPPA backend"Richard Henderson1-0/+5
This reverts commit d41f3c3cc7a5fb9de144cc4022da14a9ff010671. Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-20Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-10/+17
* QOM interface fix (Eduardo) * RTC fixes (Gaohuai, Igor) * Memory leak fixes (Li Qiang, me) * Ctrl-a b regression (Marc-André) * Stubs cleanups and fixes (Leif, me) * hxtool tweak (me) * HAX support (Vincent) * QemuThread, exec.c and SCSI fixes (Roman, Xinhua, me) * PC_COMPAT_2_8 fix (Marcelo) * stronger bitmap assertions (Peter) # gpg: Signature made Fri 20 Jan 2017 12:49:01 GMT # gpg: using RSA key 0xBFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (35 commits) pc.h: move x-mach-use-reliable-get-clock compat entry to PC_COMPAT_2_8 bitmap: assert that start and nr are non negative Revert "win32: don't run subprocess tests on Mingw32 platform" hax: add Darwin support Plumb the HAXM-based hardware acceleration support target/i386: Add Intel HAX files kvm: move cpu synchronization code KVM: PPC: eliminate unnecessary duplicate constants ramblock-notifier: new char: fix ctrl-a b not working exec: Add missing rcu_read_unlock x86: ioapic: fix fail migration when irqchip=split x86: ioapic: dump version for "info ioapic" x86: ioapic: add traces for ioapic hxtool: emit Texinfo headings as @subsection qemu-thread: fix qemu_thread_set_name() race in qemu_thread_create() serial: fix memory leak in serial exit scsi-block: fix direction of BYTCHK test for VERIFY commands pc: fix crash in rtc_set_memory() if initial cpu is marked as hotplugged acpi: filter based on CONFIG_ACPI_X86 rather than TARGET ... # Conflicts: # include/hw/i386/pc.h
2017-01-19Revert "win32: don't run subprocess tests on Mingw32 platform"Marc-André Lureau1-1/+1
This reverts commit 7ad9339e372fcd12d584684d7f52ac259604a4f4. The error "Failed to execute helper program (No such file or directory)" is due to broken glib installation, missing windows gspawn helpers. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20170104205722.26492-1-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-19Plumb the HAXM-based hardware acceleration supportVincent Palatin1-0/+18
Use the Intel HAX is kernel-based hardware acceleration module for Windows (similar to KVM on Linux). Based on the "target/i386: Add Intel HAX to android emulator" patch from David Chou <david.j.chou@intel.com> Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Message-Id: <7b9cae28a0c379ab459c7a8545c9a39762bd394f.1484045952.git.vpalatin@chromium.org> [Drop hax_populate_ram stub. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-16build: remove --enable-colo/--disable-coloPaolo Bonzini1-11/+0
No need to provide this knob, so remove it and stubs/migration-colo.c. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-16build-sys: add qapi doc generation targetsMarc-André Lureau1-1/+1
Generate and install the man, txt and html versions of QAPI documentation (generate and install qemu-doc.txt too). Add it also to optional pdf/info targets. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20170113144135.5150-22-marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-01-09block: Rename raw-{posix,win32} to file-*.cEric Blake1-1/+1
These files deal with the file protocol, not the raw format (the file protocol is often used with other formats, and the raw format is not forced to use the file protocol). Rename things to make it a bit easier to follow. Suggested-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-12-22Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-2/+0
* core support for MemoryRegionCache from myself * rules.mak speedup and cleanups from myself and Marc-Adnré * multiboot command line fix from Vlad * SCSI fixes from myself * small qemu-timer speedup from myself * x86 debugging improvements from Doug * configurable Q35 devices from Chao * x86 5-level paging support from Kirill * x86 SHA_NI support for KVM from Yi Sun * improved kvmclock migration logic from Marcelo * bugfixes and doc fixes from others # gpg: Signature made Thu 22 Dec 2016 15:01:13 GMT # gpg: using RSA key 0xBFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (25 commits) x86: implement la57 paging mode target-i386: Fix eflags.TF/#DB handling of syscall/sysret insns kvmclock: reduce kvmclock difference on migration kvm: sync linux headers scsi-disk: fix VERIFY for scsi-block hw/block/pflash_cfi*.c: fix confusing assert fail message multiboot: copy the cmdline verbatim, unescape module strings x86: Fix x86_64 'g' packet response to gdb from 32-bit mode. pc: make pit configurable pc: make sata configurable pc: make smbus configurable target-i386: Add Intel SHA_NI instruction support. block: drop remaining legacy aio functions in comment main-loop: update comment for qemu_mutex_lock/unlock_iothread timer: fix misleading comment in timer.h qemu-timer: check active_timers outside lock/event virtio-scsi: introduce virtio_scsi_acquire/release build-sys: remove libtool left-over rules.mak: add more rules to avoid chaining rules.mak: speedup save-vars load-vars ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-12-22build-sys: remove libtool left-overMarc-André Lureau1-2/+0
Libtool support was removed in commit e999ee44349, there is a few left-over. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20161108070513.30274-1-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-12-22configure: add CONFIG_GCRYPT_HMAC itemLongpeng(Mike)1-0/+17
This item will be used for support libcrypt-backed HMAC algorithms. Support for hmac has been added in Libgcrypt 1.6.0, but we cannot use pkg-config to get libcrypt's version. However we can make a in configure to know whether current libcrypt support hmac. Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-11-29rules.mak: Also try -r to build modulesPaolo Bonzini1-2/+8
Building qemu fails in distributions where gcc enables PIE by default (e.g. Debian unstable) with: /usr/bin/ld: -r and -pie may not be used together You have to use -r instead of -Wl,-r to avoid gcc passing -pie to the linker when PIE is enabled and a relocatable object is passed. However, clang does not know about -r, so try -Wl,-r first. [This is a fix for commit c96f0ee6a67ca6277366e78ce5d84d5c20dd596f ("rules.mak: Use -r instead of -Wl, -r to fix building when PIE is default") which mostly worked but broke the ./configure --enable-modules build with clang. --Stefan] Reported-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20161129153720.29747-1-pbonzini@redhat.com Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-11-29configure: fix LTTng UST tracing backend detectionFrancis Deslauriers1-2/+2
The detection program needs to be linked with -ldl to build succesfully with recent versions of LTTng-UST. We also need to add -ldl to the libs required to build the LTTng-UST backend (lttng_ust_libs). Signed-off-by: Francis Deslauriers <francis.deslauriers@efficios.com> Message-id: 1480348337-24271-1-git-send-email-francis.deslauriers@efficios.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-11-22Fix FreeBSD (10.x) build after 7dc9ae43Ed Maste1-0/+2
Include sys/user.h for declaration of 'struct kinfo_proc'. Add -lutil to qemu-ga link for kinfo_getproc. Signed-off-by: Ed Maste <emaste@freebsd.org> Message-id: 1479778365-11315-1-git-send-email-emaste@freebsd.org Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-11-10Fix cursesw detectionSamuel Thibault1-1/+6
On systems which do not provide ncursesw.pc and whose /usr/include/curses.h does not include wide support, we should not only try with no -I, i.e. /usr/include, but also with -I/usr/include/ncursesw. To properly detect for wide support with and without -Werror, we need to check for the presence of e.g. the WACS_DEGREE macro. We also want to stop at the first curses_inc_list configuration which works, and make sure to set IFS to : at each new loop. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com> Message-id: 20161109102752.13255-1-samuel.thibault@ens-lyon.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-10-31sockets: add AF_VSOCK supportStefan Hajnoczi1-0/+31
Add the AF_VSOCK address family so that qemu-ga will be able to use virtio-vsock. The AF_VSOCK address family uses <cid, port> address tuples. The cid is the unique identifier comparable to an IP address. AF_VSOCK does not use name resolution so it's easy to convert between struct sockaddr_vm and strings. This patch defines a VsockSocketAddress instead of trying to piggy-back on InetSocketAddress. This is cleaner in the long run since it avoids lots of IPv4 vs IPv6 vs vsock special casing. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> * treat trailing commas as garbage when parsing (Eric Blake) * add configure check instead of checking AF_VSOCK directly Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-10-30configure: Support enable/disable COLO featurezhanghailiang1-0/+11
configure --enable-colo/--disable-colo to switch COLO support on/off. COLO feature doesn't depend on any other external libraries, So here it is reasonable to enable COLO by default, to avoid re-compile QEMU if users want to use this capability. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-28Merge remote-tracking branch 'remotes/kraxel/tags/pull-ui-20161028-1' into ↵Peter Maydell1-9/+20
staging braille fixes and improvements. curses fix, switch to cursesw. gtk bugfixes. # gpg: Signature made Fri 28 Oct 2016 13:05:12 BST # gpg: using RSA key 0x4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/pull-ui-20161028-1: curses: Use cursesw instead of curses curses: fix left/right arrow translation ui/gtk: Fix non-working DELETE key gtk: fix compilation warning with gtk 3.22.2 Defer BrlAPI tty acquisition to when guest starts using device Add dots keypresses support to the baum braille device Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-28curses: Use cursesw instead of cursesSamuel Thibault1-9/+20
Use ncursesw package instead of curses on non-mingw, and check a few functions. Also take cflags from pkg-config, since cursesw headers may be in a separate, non-default directory. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Message-id: 20161015195308.20473-3-samuel.thibault@ens-lyon.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-10-28configure, ppc64: Copy skiboot.lid to build directory when configuringAlexey Kardashevskiy1-0/+1
When configured to compile out of tree, the configure script copies BIOS blobs to the build directory. However since the PPC64 powernv machine ROM has .lid extension, it is ignored and "make check" fails when trying the powernv machine. This adds *.lid to the list of copied blobs. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-26tcg: Add CONFIG_ATOMIC64Richard Henderson1-0/+33
Allow qemu to build on 32-bit hosts without 64-bit atomic ops. Even if we only allow 32-bit hosts to multi-thread emulate 32-bit guests, we still need some way to handle the 32-bit guest using a 64-bit atomic operation. Do so by dropping back to single-step. Reviewed-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-10-26tcg: Add atomic128 helpersRichard Henderson1-1/+28
Force the use of cmpxchg16b on x86_64. Wikipedia suggests that only very old AMD64 (circa 2004) did not have this instruction. Further, it's required by Windows 8 so no new cpus will ever omit it. If we truely care about these, then we could check this at startup time and then avoid executing paths that use it. Reviewed-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-10-21linux-user: Add support for syncfs() syscallAleksandar Markovic1-0/+18
This patch implements Qemu user mode syncfs() syscall support. Syscall syncfs() syncs the filesystem containing file determined by the open file descriptor passed as the argument to syncfs(). The implementation consists of a straightforward invocation of host's syncfs(). Configure and strace support is included as well. Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-10-21linux-user: Add support for clock_adjtime() syscallAleksandar Markovic1-0/+18
This patch implements Qemu user mode clock_adjtime() syscall support. The implementation is based on invocation of host's clock_adjtime(). Signed-off-by: Aleksandar Rikalo <aleksandar.rikalo@imgtec.com> Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-10-11build: Work around SIZE_MAX bug in OSX headersEric Blake1-0/+16
C99 requires SIZE_MAX to be declared with the same type as the integral promotion of size_t, but OSX mistakenly defines it as an 'unsigned long long' expression even though size_t is only 'unsigned long'. Rather than futzing around with whether size_t is 32- or 64-bits wide (which would be needed if we cared about using SIZE_T in a #if expression), just hard-code it with a cast. This is not a strict C99-compliant definition, because it doesn't work in the preprocessor, but if we later need that, the build will break on Mac to inform us to improve our replacement at that time. See also https://patchwork.ozlabs.org/patch/542327/ for an instance where the wrong type trips us up if we don't fix it for good in osdep.h. Some versions of glibc make a similar mistake with SSIZE_MAX; the goal is that the approach of this patch could be copied to work around that problem if it ever becomes important to us. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-id: 1476200784-17210-1-git-send-email-eblake@redhat.com Reviewed-by: John Arbuckle <programmingkidx@gmail.com> Tested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-29oslib-posix: add a configure switch to debug stack usagePeter Lieven1-0/+19
this adds a knob to track the maximum stack usage of stacks created by qemu_alloc_stack. Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.2.1 (git 2.18.0) at 2024-06-03 08:49:39 +0000