summaryrefslogtreecommitdiff
path: root/cpu-common.h
AgeCommit message (Collapse)AuthorFilesLines
2012-07-02cpu-common.h: Remove a pointless ifndef CONFIG_USER_ONLYPeter Maydell1-2/+0
Remove an ifndef CONFIG_USER_ONLY guard that was pointless because it is already inside an if !defined(CONFIG_USER_ONLY). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-02cpu-common.h: Remove unnecessary guard on including targphys.hPeter Maydell1-2/+0
There's no need to make the include of targphys.h conditional on whether TARGET_PHYS_ADDR_BITS is defined, because targphys.h itself checks that and does nothing if it isn't. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-06-04Add API to check whether a physical address is I/O addressWen Congyang1-0/+4
This API will be used in the following patch. Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-03-03w64: Fix size of ram_addr_tStefan Weil1-3/+3
ram_addr_t must be large enough to address any address of the host. For hosts with sizeof(unsigned long) == sizeof(void *), this patch changes nothing. All currently supported hosts fall into this category. For w64 hosts, sizeof(unsigned long) is 4 while sizeof(void *) is 8, so the use of uintptr_t is needed. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-01-04Remove IO_MEM_SHIFTAvi Kivity1-2/+0
We no longer use any of the lower bits of a ram_addr, so we might as well use them for the io table index. This increases the number of potential I/O handlers by a factor of 8. Signed-off-by: Avi Kivity <avi@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2012-01-04Drop IO_MEM_ROMDAvi Kivity1-3/+0
Unlike ->readonly, ->readable is not inherited from aliase, so we can simply query the memory region. Signed-off-by: Avi Kivity <avi@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2012-01-04Remove IO_MEM_SUBPAGEAvi Kivity1-1/+0
Replace with a MemoryRegion flag. Signed-off-by: Avi Kivity <avi@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2012-01-04Convert IO_MEM_SUBPAGE_RAM to be a MemoryRegionAvi Kivity1-1/+0
Signed-off-by: Avi Kivity <avi@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2012-01-04Convert IO_MEM_{RAM,ROM,UNASSIGNED,NOTDIRTY} to MemoryRegionsAvi Kivity1-4/+4
Convert the fixed-address IO_MEM_RAM, IO_MEM_ROM, IO_MEM_UNASSIGNED, and IO_MEM_NOTDIRTY io handlers to MemoryRegions. These aren't real regions, since they are never added to the memory hierarchy, but they allow reuse of the dispatch functionality. Signed-off-by: Avi Kivity <avi@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2012-01-04vmstate, memory: decouple vmstate from memory APIAvi Kivity1-0/+1
Currently creating a memory region automatically registers it for live migration. This differs from other state (which is enumerated in a VMStateDescription structure) and ties the live migration code into the memory core. Decouple the two by introducing a separate API, vmstate_register_ram(), for registering a RAM block for migration. Currently the same implementation is reused, but later it can be moved into a separate list, and registrations can be moved to VMStateDescription blocks. Signed-off-by: Avi Kivity <avi@redhat.com>
2012-01-03Remove cpu_get_physical_page_desc()Avi Kivity1-1/+0
No longer used. Signed-off-by: Avi Kivity <avi@redhat.com>
2012-01-03memory: remove CPUPhysMemoryClientAvi Kivity1-23/+0
No longer used. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-12-19memory: move obsolete exec.c functions to a private headerAvi Kivity1-39/+0
This will help avoid accidental usage. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-12-19memory, xen: pass MemoryRegion to xen_ram_alloc()Avi Kivity1-2/+5
Currently xen_ram_alloc() relies on ram_addr, which is going away. Give it something else to use as a cookie. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-12-15exec.c: Fix subpage memory access to RAM MemoryRegionAndreas Färber1-0/+1
Commit 95c318f5e1f88d7e5bcc6deac17330fd4806a2d3 (Fix segfault in mmio subpage handling code.) prevented a segfault by making all subpage registrations over an existing memory page perform an unassigned access. Symptoms were writes not taking effect and reads returning zero. Very small page sizes are not currently supported either, so subpage memory areas cannot fully be avoided. Therefore change the previous fix to use a new IO_MEM_SUBPAGE_RAM instead of IO_MEM_UNASSIGNED. Suggested by Avi. Reviewed-by: Avi Kivity <avi@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Cc: Avi Kivity <avi@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-12-02fix spelling in main directoryDong Xu Wang1-1/+1
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-07-29Merge remote-tracking branch 'agraf/xen-next' into stagingAnthony Liguori1-0/+8
2011-07-29move WORDS_ALIGNED to qemu-common.hPaolo Bonzini1-4/+0
This is not a CPU interface, and a configure test would not be too precise. So just add it to qemu-common.h. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-26cpu-common: Have a ram_addr_t of uint64 with Xen.Anthony PERARD1-0/+8
In Xen case, memory can be bigger than the host memory. that mean a 32bits host (and QEMU) should be able to handle a RAM address of 64bits. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-07-20Avoid CPU endian memory accesses in devicesBlue Swirl1-8/+11
Don't compile virtio.c in hwlib, it depends on memory accesses performed in CPU endianness. Make loads and stores in CPU endianness unavailable to devices and poison them to avoid further bugs. Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-17qemu_ram_ptr_length: take ram_addr_t as argumentsStefano Stabellini1-1/+1
qemu_ram_ptr_length should take ram_addr_t as argument rather than target_phys_addr_t because is doing comparisons with RAMBlock addresses. cpu_physical_memory_map should create a ram_addr_t address to pass to qemu_ram_ptr_length from PhysPageDesc phys_offset. Remove code after abort() in qemu_ram_ptr_length. Changes in v2: - handle 0 size in qemu_ram_ptr_length; - rename addr1 to raddr; - initialize raddr to ULONG_MAX. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-07-12exec: add endian specific phys ld/st functionsAlexander Graf1-0/+12
Device code some times needs to access physical memory and does that through the ld./st._phys functions. However, these are the exact same functions that the CPU uses to access memory, which means they will be endianness swapped depending on the target CPU. However, devices don't know about the CPU's endianness, but instead access memory directly using their own interface to the memory bus, so they need some way to read data with their native endianness. This patch adds _le and _be functions to ld./st._phys. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-06-19exec.c: refactor cpu_physical_memory_mapStefano Stabellini1-0/+1
Introduce qemu_ram_ptr_length that takes an address and a size as parameters rather than just an address. Refactor cpu_physical_memory_map so that we call qemu_ram_ptr_length only once rather than calling qemu_get_ram_ptr one time per page. This is not only more efficient but also tries to simplify the logic of the function. Currently we are relying on the fact that all the pages are mapped contiguously in qemu's address space: we have a check to make sure that the virtual address returned by qemu_get_ram_ptr from the second call on is consecutive. Now we are making this more explicit replacing all the calls to qemu_get_ram_ptr with a single call to qemu_ram_ptr_length passing a size argument. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> CC: agraf@suse.de CC: anthony@codemonkey.ws Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-03exec: Implement qemu_ram_free_from_ptr()Alex Williamson1-0/+1
Required for regions mapped via qemu_ram_alloc_from_ptr(). VFIO and ivshmem will make use of this to remove mappings when devices are hot unplugged. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-05-08Introduce qemu_put_ram_ptrAnthony PERARD1-0/+1
This function allows to unlock a ram_ptr give by qemu_get_ram_ptr. After a call to qemu_put_ram_ptr, the pointer may be unmap from QEMU when used with Xen. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-05Merge remote branch 'origin/master' into pciMichael S. Tsirkin1-3/+3
Conflicts: exec.c
2011-04-12cpu-common: Modify cpu_physical_memory_read and cpu_physical_memory_writeStefan Weil1-3/+3
A lot of calls don't operate on bytes but on words or on structured data. So instead of a pointer to uint8_t, a void pointer is the better choice. This allows removing many type casts. (Some very early implementations of memcpy used char pointers which were replaced by void pointers for the same reason). Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-06cpu: add set_memory flag to request dirty loggingMichael S. Tsirkin1-5/+17
Pass the flag to all cpu notifiers, doing nothing at this point. Will be used by follow-up patches. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-03-15Add qemu_ram_remapHuang Ying1-0/+1
qemu_ram_remap() unmaps the specified RAM pages, then re-maps these pages again. This is used by KVM HWPoison support to clear HWPoisoned page tables across guest rebooting, so that a new page may be allocated later to recover the memory error. [ Jan: style fixlets, WIN32 fix ] Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-02-14Introduce log_start/log_stop in CPUPhysMemoryClientAnthony PERARD1-0/+4
In order to use log_start/log_stop with Xen as well in the vga code, this two operations have been put in CPUPhysMemoryClient. The two new functions cpu_physical_log_start,cpu_physical_log_stop are used in hw/vga.c and replace the kvm_log_start/stop. With this, vga does no longer depends on kvm header. [ Jan: rebasing and style fixlets ] Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-12-11exec: introduce endianness swapped mmioAlexander Graf1-1/+7
The way we're currently modeling mmio is too simplified. We assume that every device has the same endianness as the target CPU. In reality, most devices are little endian (all PCI and ISA ones I'm aware of). Some are big endian (special system devices) and a very little fraction is target native endian (fw_cfg). So instead of assuming every device to be native endianness, let's move to a model where the device tells us which endianness it's in. That way we can compile the devices only once and get rid of all the ugly swap will be done by the underlying layer. For the same of readability, this patch only introduces the helper framework but doesn't allow the registering code to set its endianness yet. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-02migration: stable ram block orderingMichael S. Tsirkin1-0/+3
This makes ram block ordering under migration stable, ordered by offset. This is especially useful for migration to exec, for debugging. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Jason Wang <jasowang@redhat.com>
2010-10-20Export qemu_ram_addr_from_hostMarcelo Tosatti1-1/+2
To be used by next patches. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-10Add qemu_ram_alloc_from_ptr functionCam Macdonell1-0/+2
Provide a function to add an allocated region of memory to the qemu RAM. This patch is copied from Marcelo's qemu_ram_map() in qemu-kvm and given the clearer name qemu_ram_alloc_from_ptr(). Signed-off-by: Cam Macdonell <cam@cs.ualberta.ca> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-06qemu_ram_alloc: Add DeviceState and name parametersAlex Williamson1-1/+1
These will be used to generate unique id strings for ramblocks. The name field is required, the device pointer is optional as most callers don't have a device. When there's no device or the device isn't a child of a bus implementing BusInfo.get_dev_path, the name should be unique for the platform. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-04-25Remove IO_MEM_SUBWIDTH.Richard Henderson1-1/+0
Greatly simplify the subpage implementation by not supporting multiple devices at the same address at different widths. We don't need full copies of mem_read/mem_write/opaque for each address, only a single index back into the main io_mem_* arrays. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-04-09move targphys.h and hw/poison.h inclusion to cpu-common.hPaolo Bonzini1-0/+8
With more files from outside the hw/ directory being placed into libhw, avoid the need to include hw/hw.h for the sake of targ_phys_addr_t. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-01tcg: initial ia64 supportAurelien Jarno1-1/+1
A few words about design choices: * On IA64, instructions should be grouped by bundle, and dependencies between instructions declared. A first version of this code tried to schedule instructions automatically, but was very complex and too invasive for the current common TCG code (ops not ending at instruction boundaries, code retranslation breaking already generated code, etc.) It was also not very efficient, as dependencies between TCG ops is not available. Instead the option taken by the current implementation does not try to fill the bundle by scheduling instructions, but by providing ops not available as an ia64 instruction, and by offering 22-bit constant loading for most of the instructions. With both options the bundle are filled at approximately the same level. * Up to 128 registers can be affected to a function on IA64, but TCG limits this number to 64, which is actually more than enough. The register affectation is the following: - r0: used to map a constant argument with value 0 - r1: global pointer - r2, r3: internal use - r4 to r6: not used to avoid saving them - r7: env structure - r8 to r11: free for TCG (call clobbered) - r12: stack pointer - r13: thread pointer - r14 to r31: free for TCG (call clobbered) - r32: reserved (return address) - r33: reserved (PFS) - r33 to r63: free for TCG * The IA64 architecture has only 64-bit registers and no 32-bit instructions (the only exception being cmp4). Therefore 64-bit registers and instructions are used for 32-bit ops. The adopted strategy is the same as the ABI, that is the higher 32 bits are undefined. Most ops (and, or, add, shl, etc.) can directly use the 64-bit registers, while some others have to sign-extend (sar, div, etc.) or zero-extend (shr, divu, etc.) the register first. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-21Compile pci only onceBlue Swirl1-0/+11
Move coalesced_mmio declarations to a more accessible location. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-12Disable phsyical memory handling in userspace emulation.Paul Brook1-0/+4
Code to handle physical memory access is not meaningful in usrmode emulation, so disable it. Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-02-09qemu: memory notifiersMichael S. Tsirkin1-0/+19
This adds notifiers for phys memory changes: a set of callbacks that vhost can register and update kernel accordingly. Down the road, kvm code can be switched to use these as well, instead of calling kvm code directly from exec.c as is done now. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Revert "Get rid of _t suffix"Anthony Liguori1-34/+34
In the very least, a change like this requires discussion on the list. The naming convention is goofy and it causes a massive merge problem. Something like this _must_ be presented on the list first so people can provide input and cope with it. This reverts commit 99a0949b720a0936da2052cb9a46db04ffc6db29. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Get rid of _t suffixmalc1-34/+34
Some not so obvious bits, slirp and Xen were left alone for the time being. Signed-off-by: malc <av1474@comtv.ru>
2009-08-25Make CPURead/WriteFunc structure 'const'Blue Swirl1-2/+2
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-24Unbreak large mem support by removing kqemuAnthony Liguori1-5/+0
kqemu introduces a number of restrictions on the i386 target. The worst is that it prevents large memory from working in the default build. Furthermore, kqemu is fundamentally flawed in a number of ways. It relies on the TSC as a time source which will not be reliable on a multiple processor system in userspace. Since most modern processors are multicore, this severely limits the utility of kqemu. kvm is a viable alternative for people looking to accelerate qemu and has the benefit of being supported by the upstream Linux kernel. If someone can implement work arounds to remove the restrictions introduced by kqemu, I'm happy to avoid and/or revert this patch. N.B. kqemu will still function in the 0.11 series but this patch removes it from the 0.12 series. Paul, please Ack or Nack this patch. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-16Remove io_index argument from cpu_register_io_memory()Avi Kivity1-2/+1
The parameter is always zero except when registering the three internal io regions (ROM, unassigned, notdirty). Remove the parameter to reduce the API's power, thus facilitating future change. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-19Hardware convenience libraryPaul Brook1-0/+96
The only target dependency for most hardware is sizeof(target_phys_addr_t). Build these files into a convenience library, and use that instead of building for every target. Remove and poison various target specific macros to avoid bogus target dependencies creeping back in. Big/Little endian is not handled because devices should not know or care about this to start with. Signed-off-by: Paul Brook <paul@codesourcery.com>