summaryrefslogtreecommitdiff
path: root/docs/specs
AgeCommit message (Collapse)AuthorFilesLines
2014-01-26acpi: ich9: add CPU hotplug handling to Q35 machineIgor Mammedov1-1/+3
.. use IO port 0cd8-0xcf7 range for CPU present bitmap Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-11qcow2: Alignment of snapshot table entriesMax Reitz1-0/+3
The qcow2 specification does not explicitly state so far that every snapshot table entry is aligned to 8 bytes. QEMU, in contrast, does this alignment, thus it should be properly documented (which this patch does). Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-09-20docs: Fix IO port number for CPU present bitmap.Anthony PERARD1-1/+1
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Reviewd-By: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-08-30qcow2: Add corrupt bitMax Reitz1-1/+6
This adds an incompatible bit indicating corruption to qcow2. Any image with this bit set may not be written to unless for repairing (and subsequently clearing the bit if the repair has been successful). Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-05-01acpi_piix4: Add infrastructure to send CPU hot-plug GPE to guestIgor Mammedov1-0/+22
* introduce processor status bitmask visible to guest at 0xaf00 addr, where ACPI asl code expects it * set bit corresponding to APIC ID in processor status bitmask on receiving CPU hot-plug notification * trigger CPU hot-plug SCI, to notify guest about CPU hot-plug event Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-04-30pvpanic: add document of pvpanicHu Tao1-0/+39
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-id: a5db4ce406647e8f4663b639eae62d880531df8b.1366945969.git.hutao@cn.fujitsu.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-22Merge remote-tracking branch 'bonzini/scsi-next' into stagingAnthony Liguori1-0/+92
# By Paolo Bonzini (5) and others # Via Paolo Bonzini * bonzini/scsi-next: vhost-scsi-s390: new device supporting the tcm_vhost Linux kernel module vhost-scsi-ccw: new device supporting the tcm_vhost Linux kernel module vhost-scsi-pci: new device supporting the tcm_vhost Linux kernel module vhost-scsi: new device supporting the tcm_vhost Linux kernel module virtio: simplify Makefile conditionals virtio-scsi: create VirtIOSCSICommon vhost: Add vhost_commit callback for SeaBIOS ROM region re-mapping scsi: VMWare PVSCSI paravirtual device implementation scsi: avoid assertion failure on VERIFY command Message-id: 1366381460-6041-1-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-19scsi: VMWare PVSCSI paravirtual device implementationDmitry Fleytman1-0/+92
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com> Signed-off-by: Yan Vugenfirer <yan@daynix.com> [ Rename files to vmw_pvscsi, fix setting of hostStatus in pvscsi_request_cancelled - Paolo ] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-16pci: add pci test deviceMichael S. Tsirkin1-0/+26
This device is used for kvm unit tests, currently it supports testing performance of ioeventfd. Using updated kvm unittest, here's an example output: mmio-no-eventfd:pci-mem 8796 mmio-wildcard-eventfd:pci-mem 3609 mmio-datamatch-eventfd:pci-mem 3685 portio-no-eventfd:pci-io 5287 portio-wildcard-eventfd:pci-io 1762 portio-datamatch-eventfd:pci-io 1777 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-01-09pci: use constants for devices under the 1B36 device ID, document themPaolo Bonzini1-0/+15
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-01-08ivshmem: use symbolic constant for PCI ID, add to pci-ids.txtPaolo Bonzini1-0/+2
Due to disagreement on a name that is generic enough for hw/pci/pci.h, the symbolic constants are placed in the .c files. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-01-08virtio-9p: use symbolic constant, add to pci-ids.txtPaolo Bonzini1-0/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-01-08reorganize pci-ids.txtPaolo Bonzini1-13/+14
Some devices were missing, and we're using two PCI vendor ids. This patch only adds devices that are already documented in hw/pci/pci.h. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-01-08docs: move pci-ids.txt to docs/specs/Paolo Bonzini1-0/+31
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-11-16vga: fix bochs alignment issueGerd Hoffmann1-1/+2
The bochs dispi interface traditionally uses port 0x1ce as 16bit index register and port 0x1cf as 16bit data register. The later is unaligned, and probably for that reason the the data register was moved to 0x1d0 for non-x86 archs. This patch makes the data register available at 0x1d0 on x86 too. The old x86 location is kept for compatibility reasons, so both 0x1cf and 0x1d0 can be used as data register on x86. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-10-22serial: add pci-serial documentationGerd Hoffmann1-0/+34
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-20vga: add specs for standard vgaGerd Hoffmann1-0/+64
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-09-14Spelling fixes in comments and documentationStefan Weil1-1/+1
These wrong spellings were detected by codespell: * successully -> successfully * alot -> a lot * wanna -> want to * infomation -> information * occured -> occurred ["also is" -> "is also" and "ressources" -> "resources" suggested by Peter Maydell <peter.maydell@linaro.org>] Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-08-06docs: add lazy refcounts bit to qcow2 specificationStefan Hajnoczi1-1/+6
The lazy refcounts bit indicates that this image can take advantage of the dirty bit and that refcount updates can be postponed. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-08-06docs: add dirty bit to qcow2 specificationStefan Hajnoczi1-1/+6
The dirty bit will make it possible to perform lazy refcount updates, where the image file is not kept consistent all the time. Upon opening a dirty image file, it is necessary to perform a consistency check and repair any incorrect refcounts. Therefore the dirty bit must be an incompatible feature bit. We don't want old programs accessing a file with stale refcounts. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-06-24spapr: Add "memop" hypercallBenjamin Herrenschmidt1-0/+78
This adds a qemu-specific hypervisor call to the pseries machine which allows to do what amounts to memmove, memcpy and xor over regions of physical memory such as the framebuffer. This is the simplest way to get usable framebuffer speed from SLOF since the framebuffer isn't mapped in the VRMA and so would otherwise require an hcall per 8 bytes access. The performance is still not great but usable, and can be improved with a more complex implementation of the hcall itself if needed. This also adds some documentation for the qemu-specific hypercalls that we add to PAPR along with a new qemu,hypertas-functions property that mirrors ibm,hypertas-functions and provides some discoverability for the new calls. Note: I chose note to advertise H_RTAS to the guest via that mechanism. This is done on purpose, the guest uses the normal RTAS interfaces provided by qemu (including SLOF) which internally calls H_RTAS. We might in the future implement part (or even all) of RTAS inside the guest like IBM's firmware does and replace H_RTAS with some finer grained set of private hypercalls. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-05-02docs: fix one issue in qcow2 specsZhi Yong Wu1-1/+1
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-04-20Specification for qcow2 version 3Kevin Wolf1-23/+99
This updates the qcow2 specification to cover version 3. It contains the following changes: - Added compatible/incompatible/auto-clear feature bits plus an optional feature name table to allow useful error messages even if an older version doesn't know some feature at all. - Configurable refcount width. If you don't want to use internal snapshots, make refcounts one bit and save cache space and I/O. - Zero cluster flags. This allows discard even with a backing file that doesn't contain zeros. It is also useful for copy-on-read/image streaming, as you'll want to keep sparseness without accessing the remote image for an unallocated cluster all the time. - Fixed internal snapshot metadata to use 64 bit VM state size. You can't save a snapshot of a VM with >= 4 GB RAM today. - Extended internal snapshot metadata to contain the disk size, so that resizing images that have snapshots can be allowed in the future. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-04-15acpi_piix4: Re-define PCI hotplug eject register readAlex Williamson1-2/+10
The PCI hotplug eject register has always returned 0, so let's redefine it as a hotplug feature register. The existing model of using separate up & down read-only registers and an eject via write to this register becomes the base implementation. As we make use of new interfaces we'll set bits here to allow the BIOS and AML implementation to optimize for the platform implementation. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-04-15acpi_piix4: Remove PCI_RMV_BASE write codeAlex Williamson1-1/+1
Clarify this register as read-only and remove write code. No change in existing behavior. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-04-15acpi_piix4: Disallow write to up/down PCI hotplug registersAlex Williamson1-2/+2
The write side of these registers is never used and actually can't be used as defined because any read/modify/write sequence from the guest potentially races with qemu. Drop the write support and define these as read-only registers. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-04-07Replace Qemu by QEMU in internal documentationStefan Weil1-1/+1
The official spelling is QEMU. Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-12-15qcow2: Allow >4 GB VM stateKevin Wolf1-1/+7
This is a compatible extension to the snapshot header format that allows saving a 64 bit VM state size. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-28qcow2: fix some errors and typo in qcow2.txtZhi Yong Wu1-3/+3
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-04-13docs: Describe zero data clusters in QED specificationStefan Hajnoczi1-0/+8
Zero data clusters are a space-efficient way of storing zeroed regions of the image. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-03-16Add qcow2 documentationKevin Wolf1-0/+260
This adds a description of the qcow2 file format to the docs/ directory. Besides documenting what's there, which is never wrong, the document should provide a good basis for the discussion of format extensions (called "qcow3" in previous discussions) Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-01-17document QEMU<->ACPIBIOS PCI hotplug interfaceMarcelo Tosatti1-0/+37
Document how QEMU communicates with ACPI BIOS for PCI hotplug. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-12-17docs: Fix missing carets in QED specificationStefan Hajnoczi1-2/+2
For some reason the carets ('^') in the QED specification disappeared. This patch puts them back. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17docs: Add QED image format specificationStefan Hajnoczi1-0/+130
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-08-10Device specification for shared memory PCI deviceCam Macdonell1-0/+96
Signed-off-by: Cam Macdonell <cam@cs.ualberta.ca> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.2.1 (git 2.18.0) at 2024-05-18 07:44:55 +0000